Alexis Guijarro
43b8900bec
hwdef: Removed duplication for AP_STATS_ENABLED
2024-10-11 09:51:27 +11:00
Peter Barker
b36f539c7c
SITL: avoid floating point exception around rangefinder distance
...
projecting onto an infinite plane can cause exceptionally long rangefinder distances - for now jsut cap the distance that the simulated rangefinder can return to avoid floating point exceptions.
the FPE is caused in the Plane FlyEachFrame autotest when flying quadplane-copter_tailsitter - which ends up with a rangefinder at yaw-minus-180.
2024-10-10 20:44:04 +11:00
Andy Piper
cb111504e2
AP_InertialSensor: cope with negative ESC frequencies in notch updates
2024-10-09 18:31:57 +11:00
Tiziano Fiorenzani
57157d470f
AP_DDS: Airspeed topic
2024-10-09 10:00:32 +11:00
Peter Barker
dec10a1a58
hwdef: GEPRCF745BTHD: remove parachute and bl-flashing support (flash overflow)
2024-10-09 08:24:12 +11:00
Henry Wurzburg
b71ed41c32
AP_BLHeli:correct RVMASK metadata
2024-10-08 20:58:16 +11:00
Peter Barker
8ba2dae936
AP_NavEKF2: clarify wind direction descriptions
2024-10-08 20:57:36 +11:00
Peter Barker
197d837b6c
SITL: clarify wind direction descriptions
2024-10-08 20:57:36 +11:00
Peter Barker
8edcb4b8d3
AP_NavEKF3: clarify wind direction descriptions
2024-10-08 20:57:36 +11:00
Peter Barker
8487657137
AP_AHRS: DCM: log estimated wind
2024-10-08 20:57:36 +11:00
Peter Barker
56de7243f5
AP_AHRS: DCM: tidy variable creation
2024-10-08 20:57:25 +11:00
muramura
6c1a5bf3d0
AP_Logger: Align the order of definitions
2024-10-08 20:57:01 +11:00
Peter Barker
41753b43d7
AP_AHRS: DCM: remove unused variable
2024-10-08 11:10:26 +11:00
Peter Barker
3273f58851
AP_HAL: remove defines for boards which don't exist
...
we'll now get compilation failures if code is introduced depending on these...
2024-10-08 11:04:28 +11:00
Peter Barker
93174e3240
AP_HAL: avoid include of non-existant file
...
this file doesn't exist
2024-10-08 11:04:28 +11:00
olliw42
4616fec1be
AP_SerialManager: RegisteredPort, add bytes_per_second/baudrate methods
2024-10-08 10:42:21 +11:00
Thomas Watson
e9e7eba799
AP_DroneCAN: properly convert timeout to deadline for aux frames
...
The timeout specified for auxiliary driver frames was passed to the
driver where a deadline was expected. The transmission was then started
after its "deadline", thereby causing it to be canceled and the data
lost if the frame could not be sent immediately.
Fix by converting the timeout to a deadline before passing to the
driver. The conversion is done in the Canard interface code as it
already does other conversions from timeouts to deadlines.
2024-10-08 10:35:41 +11:00
ARg
47d391fc6d
AP_HAL_ESP32: ADC driver ported to new idf 5.x driver and debugged
2024-10-08 10:29:02 +11:00
Ryan Friedman
88c06e07d7
AP_DDS: Wrap all topics in ifdefs
...
* Give ability to enable/disable any topic in DDS through compile
options
Signed-off-by: Ryan Friedman <25047695+Ryanf55@users.noreply.github.com>
2024-10-08 10:18:38 +11:00
Nick Exton
77f1efac5e
AP_Mission: Set DO_MOUNT_CONTROL.mode when converting command to MAVLink
2024-10-08 08:05:27 +09:00
bnsgeyer
e30b4bf090
AP_MotorsHeli: fix cooldown feature with new autorotation RSC library
2024-10-06 14:33:57 +11:00
Leonard Hall
4d116ceefe
AR_PosControl: integrate PSC logging update
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2024-10-04 09:25:56 +09:00
Leonard Hall
399336f7ce
AC_PID: AC_P_2D comment fix
2024-10-04 09:25:56 +09:00
Randy Mackay
73dfeac547
AP_Scripting: copter-slung-payload suppresses oscillation
...
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
2024-10-04 09:25:56 +09:00
Randy Mackay
bff288d498
AP_Scripting: mavlink_msgs global-position-int and heartbeat
2024-10-04 09:25:56 +09:00
Randy Mackay
51ec6dfd73
AP_Scripting: add copter-posoffset example script
...
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
2024-10-04 09:25:56 +09:00
Randy Mackay
0c81f111fb
AP_Scripting: add set_posvelaccel_offset binding
...
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
2024-10-04 09:25:56 +09:00
Leonard Hall
37a7635c66
AC_Loiter: updates to offset handling
2024-10-04 09:25:56 +09:00
Randy Mackay
e20c7edf68
AC_Loiter: optimise get-posvelaccel-target usage
2024-10-04 09:25:56 +09:00
Randy Mackay
2753b7030b
AC_Circle: get-closest-point-on-circle returns dist
2024-10-04 09:25:56 +09:00
Randy Mackay
9ca47cf465
AC_Circle: integrate pos vel accel offsets
...
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
2024-10-04 09:25:56 +09:00
Leonard Hall
9185b82b7a
AC_WPNav: get_closest_point_on_circle uses is_positive
2024-10-04 09:25:56 +09:00
Randy Mackay
951ff473c3
AC_WPNav: support pos vel accel offsets
...
Co-authored-by: Leonard Hall <leonardthall@gmail.com>
2024-10-04 09:25:56 +09:00
Randy Mackay
c706d01d7f
AC_PosControl: implement singleton
2024-10-04 09:25:56 +09:00
Leonard Hall
9fb8a0f1ac
AC_PosControl: support 3D pos, vel, accel offsets
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2024-10-04 09:25:56 +09:00
George Zogopoulos
68003a5eb4
AP_TECS: Reverted pitch limitation order
2024-10-02 17:09:07 +10:00
George Zogopoulos
121adf5f6d
AP_TECS: Throttle limits refactor
2024-10-02 17:09:07 +10:00
George Zogopoulos
880ebbcdad
AP_TECS: Takeoff improvements
...
- Refactor and split set_pitch_max_limit method.
- New _update_pitch_limits to encapsulate all relevant functionality.
- Automatically reset if pitch and throttle are overriden.
- nullified TAKEOFF alt_dem offset on external throttle.
- Simplify use of TKOFF_THR_MIN.
- Prevent takeoff altitude overshoot by capping the altitude setpoint offset.
- Move pitch limits after vertical acceleration limitation.
2024-10-02 17:09:07 +10:00
Bayu Laksono
efe003743c
AP_Notify: Add GPIO driver and buzzer
2024-10-01 21:06:39 -05:00
Bayu Laksono
6d672d42b9
AP_HAL_ESP32: Add GPIO driver and buzzer
2024-10-01 21:06:39 -05:00
Stephen Dade
9a563e222f
GCS_MAVLink: Check if set_message_interval is too fast
2024-10-02 09:22:43 +10:00
Ryan Friedman
1bdc635ba8
AP_DDS: Implement joystick support
...
Signed-off-by: Ryan Friedman <ryan.friedman+github@avinc.com>
Co-Authored-by: Tiziano Fiorenzani
2024-10-01 10:46:35 +10:00
Andrew Tridgell
b6f20e3786
AP_Scripting: docs update
2024-10-01 10:45:10 +10:00
Andrew Tridgell
3bbde7c302
AP_Scripting: test update
2024-10-01 10:45:10 +10:00
Andrew Tridgell
6a16bce001
AP_Scripting: added bindings for IPv4 address/string
...
and make socket recv return the source address and port
2024-10-01 10:45:10 +10:00
Peter Barker
8dec79d136
AP_GPS: use AP_GPS_FixType for ExternalAHRS fix type
2024-10-01 10:32:11 +10:00
Peter Barker
f66815b200
AP_ExternalAHRS: use AP_GPS_FixType for ExternalAHRS fix type
2024-10-01 10:32:11 +10:00
Peter Barker
efec7ccdc5
SITL: remove stale parameter metadata
...
now done by having the subgroup in its own file
2024-10-01 10:25:49 +10:00
Iampete1
d7599f225c
GCS_MAVLink: Common: Allow scripting to receive messages which fail CRC check
2024-10-01 10:25:22 +10:00
Iampete1
902f1e6476
AP_Scripting: modules: MAVLink: update to latest version of generated code
2024-10-01 10:25:22 +10:00
Peter Barker
163f49827f
AP_Mission: split logging of mission-upload vs mission-execution
2024-10-01 10:19:29 +10:00
Peter Barker
4237a33ce6
AP_Logger: split logging of mission-upload vs mission-execution
2024-10-01 10:19:29 +10:00
Peter Barker
1d947396b3
AP_Mission: move Mission log structures into Mission library
2024-10-01 10:19:29 +10:00
Peter Barker
b98e682ec6
AP_Logger: move Mission log structures into Mission library
2024-10-01 10:19:29 +10:00
Peter Barker
423daaa71f
GCS_MAVLink: split sending terrain report from terrain request
2024-10-01 10:13:06 +10:00
Peter Barker
a401c98c74
AP_Terrain: split sending terrain report from terrain request
2024-10-01 10:13:06 +10:00
Bob Long
11014cae06
AP_BattMonitor: add option minimum volt option
2024-10-01 10:05:01 +10:00
Andrew Tridgell
52169f25da
HAL_ChibiOS: replace volatile bools with mutexes
...
this replaces the two booleans used to mediate TX and RX buffer
protection with mutexes.
The booleans were a hangover from the very early HAL_ChibiOS code, and
can lead to a deadlock. The sequence is as follows:
- a very high CAN bus bandwidth usage, triggered by MissionPlanner
requesting CAN_FORWARD on a CAN serial port. That causes a
"infinite" number of CAN_FRAME messages which saturates the bus,
and leads to the DroneCAN thread looping with no pause
- a serial port configured as GPS type AUTO, auto-probing for a GPS
that isn't there. This calls begin() periodically
- the UART TX thread assocated with that UART not making progress as
the TX thread priority is below the DroneCAN thread priority
- this causes the begin() in main thread waiting for _in_tx_timer to
loop forever, which triggers a watchdog
2024-10-01 09:54:26 +10:00
Peter Barker
0cd6e330a5
AP_BattMonitor: add more-specific prearm failure when SUM backend not available
2024-10-01 09:48:13 +10:00
Peter Barker
721a9b846e
AP_BattMonitor: print unhealthy message if battery backend not as expected
...
a backend which fails to allocate, or where the user has changed the backend type without rebooting will cause an "unhealthy" message to be emitted
2024-10-01 09:48:13 +10:00
Henry Wurzburg
4b5f490e9f
Tools:remove BATTRY_SUM from <1K builds
2024-10-01 09:48:13 +10:00
tompsontan
84fbaa3abc
AP_HAL_ChibiOS: add board X-MAV-AP-H743v2
...
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2024-10-01 09:39:55 +10:00
Thomas Watson
8e5ee61b02
AP_NavEKF3: derivation: don't generate unused equations
...
The code is left in for the future when they might be used.
2024-10-01 09:28:54 +10:00
Thomas Watson
f9fa2565c4
AP_NavEKF3: document provenance of tilt error variance equations
...
This is also from the older version of the generator.
Note that as documented, some of the equations have been removed and
rearranged slightly as it is assumed their terms are zero. Additionally,
the result is taken as the sum of the diagonal entries of the matrix.
2024-10-01 09:28:54 +10:00
Thomas Watson
34fba4dfd7
AP_NavEKF3: document provenance of drag force fusion equations
...
It's from the older version of the generator as well.
Update variable names in the real code to be the same as the generated
code. Skip generation of the unused alternate form of the equations.
Delete `acc_bf_generated.cpp` as we know exactly how to generate it now.
2024-10-01 09:28:54 +10:00
Thomas Watson
ef1c31bd50
AP_NavEKF3: document provenance of yaw fusion equations
...
Requires digging up old versions of the generator script.
The equations have been rearranged somewhat after generation to choose
the appropriate method but they do match overall. The auto-substitution
of the power functions caused slight changes to the generated syntax so
we make those to the real code as well.
Delete `yaw_generated.cpp` as we know exactly how to generate it now.
2024-10-01 09:28:54 +10:00
Thomas Watson
ad5da01077
AP_NavEKF3: document provenance of covariance matrix equations
...
Validated that the generated code matches exactly the code in AP_NavEKF3
(except for the early exits).
Delete `covariance_generated.cpp` as we know exactly how to generate it
now (and it was out of date anyway).
2024-10-01 09:28:54 +10:00
Thomas Watson
4184980537
AP_NavEKF3: derivation: pin generator library versions
...
Document exactly which versions were used when generating the code.
Sympy is the most important so it is explicitly checked.
Also add an alternate generate script which uses `nix-shell` to make it
convenient to automatically use these versions.
2024-10-01 09:28:54 +10:00
Thomas Watson
57082257fd
AP_NavEKF3: derivation: make generation slightly easier
...
Add a shell script to run the generate_1.py file. Foresight tells us
that we will need multiple such files.
Also ignore the generated code files as they are already out of date and
we are aiming to document provenance and make them unnecessary anyway.
2024-10-01 09:28:54 +10:00
Thomas Watson
c880bf57cd
AP_NavEKF3: derivation: auto-substitute optimized power functions
...
Avoids the need to manually insert them after generation.
2024-10-01 09:28:54 +10:00
ARg
1ef0f1a63f
AP_HAL_ESP32: Migration of ESP32 targets from idf 4.4 to 5.3 consisting of:
...
- modification of CMakeLists to use new component names of idf 5.3;
- removing big sdkconfig, which changes a lot, when upgrading idf and to use sdkconfig.defaults, which contain only non default defines;
- Updated idf installation packages list, according to espressif documentation;
- Updated README.md to reflect changes in sdkconfig handling;
- Fixed WDT in Scheduler, it was broken with idf 5.3;
- fixed compilation issues with GCC 13 (which is used by idf 5.3);
- fixed bug in case when HAL_ESP32_WIFI defined as 0 (disable wifi)
- Added ESP32 targets sdkconfig (auto generated) to .gitignore
2024-10-01 09:25:35 +10:00
Peter Barker
b234729398
AP_HAL_ChibiOS: CubeRedPrimary: probe external compasses
2024-10-01 09:22:42 +10:00
Nick Exton
2989d623bd
AP_Scripting: Add binding for AP_Camera::set_stream_information()
2024-10-01 08:18:54 +09:00
Nick Exton
cb620126b3
AP_Camera: Add capability to set VIDEO_STREAM_INFORMATION from Lua
2024-10-01 08:18:54 +09:00
Nick Exton
919a711f17
AP_HAL_ChibiOS: Disable VIDEO_STREAM_INFORMATION in minimize_common.inc
2024-10-01 08:18:54 +09:00
Nick Exton
67642867e3
GCS_MAVLink: Add handler for VIDEO_STREAM_INFORMATION request
2024-10-01 08:18:54 +09:00
Nick Exton
e6ac9c3108
AP_Scripting: Add binding for AP_Camera::set_camera_information()
2024-10-01 08:18:54 +09:00
Nick Exton
fed948c98d
AP_HAL_ChibiOS: Disable CAMERA_INFO_FROM_SCRIPT in minimize_common.inc
2024-10-01 08:18:54 +09:00
Nick Exton
30a212b4cf
AP_Camera: Add capability to set CAMERA_INFORMATION from Lua
2024-10-01 08:18:54 +09:00
Andrew Tridgell
cb924d1363
AP_L1_Control: make reached_loiter_target() more reliable
...
if our target loiter radius is unachievable then we can reach the
loiter target on initial capture but be unable to maintain it. This
ensures that once we capture we return true on reached_loiter_target()
This is critical for any mission type where we take an action on
reached_loiter_target() and another condition (such as being lined up
for a waypoint). Otherwise we may continue loitering forever
2024-10-01 07:15:44 +10:00
Tdogb
f282c8db65
hwdef: add DPS280 to baros present on FlyWooF745
2024-09-30 19:58:04 +10:00
Andrew Tridgell
1e310ac86f
AP_AHRS: add option to disable the EKF check for airspeed
...
for some flight profiles (such as glider pullup) the EKF airpeed
consistency check may be triggered, leading to a valid airspeed being
ignored, which can lead TECS to be in non-airspeed mode
2024-09-29 11:06:05 +10:00
juvinski
413452aa1a
AP_Baro: fix example: fixing missing objects
...
This fix a crash running on beaglebone boards reported
https://github.com/ArduPilot/ardupilot/issues/21321
2024-09-29 09:40:37 +10:00
muramura
8de103d6ee
AP_RangeFinder: Move the flag setting location of has_data
2024-09-29 09:40:20 +10:00
muramura
637aec0085
SITL: Change division to multiplication
2024-09-28 11:01:41 +10:00
murata
946e148688
AP_Arming: mark ARMING_RUDDER as Plane,Rover,Copter and Blimp only
2024-09-27 21:51:06 +10:00
muramura
13a5dc8f71
AP_Arming: Set the message buffer size to twice the message size
2024-09-27 21:33:56 +10:00
muramura
0cb49559e1
AP_Mission: Change the IF statement to a SWITCH statement
2024-09-27 21:30:43 +10:00
Bob Long
e57994f28f
AP_ICEngine: fix send_text severities
2024-09-27 16:12:28 +10:00
Loki077
772cd1dae7
AP_ICEngine: add max retrial of cranking
...
Added Param MAX_RETRY which If set 0 or less, then there is no limit to retrials. If set to a value greater than 0 then the engine will retry starting the engine this many times before giving up.
2024-09-27 16:12:28 +10:00
Nick Exton
eb4224b818
AP_RobotisServo: Send register write values as little-endian
2024-09-27 11:53:06 +10:00
Andrew Tridgell
9dc7dc32c8
AP_DroneCAN: prevent saturation of CPU with DroneCAN thread
2024-09-27 11:06:20 +10:00
Andrew Tridgell
070363e453
HAL_ChibiOS: limit RX timeout to 100ms
...
this prevents a very long timeout in begin(), replacement with a mutex
will happen in a separate PR
2024-09-27 11:06:20 +10:00
Peter Barker
decf484702
AP_Mount: use NaN in place of 0 for camera information message
...
Co-authored-by: muramura <ma2maru@gmail.com>
2024-09-26 19:26:59 +10:00
Peter Barker
06b763ca94
AP_Param: add and use global NaNf float value
2024-09-26 19:26:59 +10:00
Peter Barker
edc0e46614
AP_Mount: add and use global NaNf float value
2024-09-26 19:26:59 +10:00
Peter Barker
7710e3c9bc
AP_Math: add and use global NaNf float value
2024-09-26 19:26:59 +10:00
Peter Barker
54247833c0
AP_Logger: add and use global NaNf float value
2024-09-26 19:26:59 +10:00
Peter Barker
08b4cc1374
AP_Camera: add and use global NaNf float value
2024-09-26 19:26:59 +10:00
Andy Piper
eeda86ccb4
AC_AttitudeControl: rate_controller_run_dt() takes dt as last argument
2024-09-26 19:25:33 +10:00
Andy Piper
15de449d12
AC_AttitudeControl: raise a config error if rate_controller_run_dt() is called by accident
2024-09-26 19:25:33 +10:00
Andy Piper
053db86abc
AC_AttitudeControl: ensure Write_Rate() can be called from autotune
2024-09-26 19:25:33 +10:00
Andy Piper
02a2c788da
AC_AttitudeControl: ensure plane always gets the latest gyro
2024-09-26 19:25:33 +10:00
Andy Piper
a647b3914c
AC_AttitudeControl: remove unused functions
2024-09-26 19:25:33 +10:00
Andy Piper
70067ea7ae
AC_AttitudeControl: Write_Rate() should be thread-safe
2024-09-26 19:25:33 +10:00
Andy Piper
829422ecfb
AC_AttitudeControl: add commentary about functions which modify the rate loop target
2024-09-26 19:25:33 +10:00
Andy Piper
6b5da48641
AC_AttitudeControl: provide function to reset target modifiers
2024-09-26 19:25:33 +10:00
Leonard Hall
2cddea8d9f
AC_Autotune_Multi: Use rate step command
2024-09-26 19:25:33 +10:00
Leonard Hall
ddfccb3098
AC_AttitudeControl: Use rate step command
2024-09-26 19:25:33 +10:00
Andy Piper
ff002cba3f
AC_AttitudeControl: ensure the rate and attitude controllers can't interfere with the target at the same time
2024-09-26 19:25:33 +10:00
Andy Piper
c28e38e9b5
AC_AttitudeControl: pass in gyro sample to rate controller
2024-09-26 19:25:33 +10:00
Andrew Tridgell
88957235d2
Scripting: added Lat,Lon to aerobatics POSM/POST
...
this makes "map POSM POST" work on aerobatic scripts
2024-09-26 16:44:13 +10:00
Rhys Mainwaring
00163ce988
AP_Camera: add Python examples for GStreamer UDP and RTSP video streams
...
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-09-26 09:32:27 +09:00
Robert Taylor
d82e82635f
hwdef: switch CAN port definiton on Nucleo-496 hwdef
...
The CAN port as it was is a valid CAN port for the nucleo, but on the development board the CAN silkscreen is actually on PD0 and PD1. This change makes it easier to get the example running on the Nucleo
2024-09-26 08:31:50 +10:00
Bob Long
8797a07833
AP_ICEngine: clarify ICE_OPTIONS:2 description
2024-09-25 23:44:52 +10:00
Bob Long
8d9ac6451f
AP_ICEngine: don't run engine with safety engaged
2024-09-25 23:44:52 +10:00
Peter Barker
14332fad52
hwdef: -Os on MFT-SEMA-100 to avoid flash overflow
2024-09-25 23:44:05 +10:00
Peter Barker
c9de940fc8
hwdef: JHEMCU-GSF405A becomes minimize-fpv-osd
2024-09-25 17:12:44 +10:00
Peter Barker
1e26441ae6
AP_Common: Integrate methods for converting hexadecimal characters to numbers
...
Co-authored-by: muramura <ma2maru@gmail.com>
2024-09-25 08:48:44 +10:00
muramura
e4ca54b2e4
AP_CANManager: Integrate methods for converting hexadecimal characters to numbers
2024-09-25 08:48:44 +10:00
Iampete1
4894675977
AP_Scripting: add binding for vehicle `set_target_rate_and_throttle`
2024-09-25 08:47:30 +10:00
Iampete1
fc327fa370
AP_Vehicle: add support for `set_target_rate_and_throttle`
2024-09-25 08:47:30 +10:00
Peter Barker
8e6a1a2b02
AP_Arming: retrieve RC channels directly from RC_Channels
...
... instead of retrieving values from rcmap and then getting the channel from RC_Channels
2024-09-25 08:46:55 +10:00
Peter Barker
1871170f98
RC_Channel: add accessor for channel number
...
some places want to be able to report this to the user
2024-09-25 08:46:55 +10:00
muramura
1f5b88cf3b
AP_Motors: Change to pass-through
2024-09-24 22:51:23 +10:00
timtuxworth
bbd9148b4b
AP_Scripting: example for use Location::AltFrame for guided_state.target_alt_frame
2024-09-24 22:51:02 +10:00
Peter Barker
3d4b57cd4a
AP_HAL_QURT: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
27df5e0479
AP_HAL_Linux: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
cc9279713a
AP_HAL_ESP32: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
ebe9a75a66
SITL: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
68e003fd74
AP_Baro: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
a40b3879fb
AC_CustomControl: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
a0978d9d0a
AR_WPNav: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
2447be861e
AP_SurfaceDistance: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
bb9a0a5b2f
AP_Scripting: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
1ce391c6e8
AP_RCTelemetry: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
87fa7a208d
AP_RCProtocol: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
53c50b6bc7
AP_NavEKF3: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
8bd1f49a04
AP_NavEKF2: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
5f5fb40753
AP_Motors: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
7147a2deeb
AP_InertialSensor: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
5a967a60ff
AP_HAL: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
8b9154d115
AP_HAL_ChibiOS: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
2ddec1f9f4
AP_Frsky_Telem: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
291a1ced88
AP_ExternalAHRS: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
3a9f1c1f37
AP_DroneCAN: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
a29dca996e
AP_Compass: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
b54c424842
AP_Camera: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
8290f15f2d
AP_AHRS: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
aaec6824f6
AP_ADSB: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
6209f31d30
AC_PID: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
2c150f42bf
AC_Avoidance: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Peter Barker
b480416c3d
AC_AttitudeControl: re-order initialiser lines so -Werror=reorder will work
2024-09-24 22:50:28 +10:00
Rhys Mainwaring
a75b8a9269
AP_DDS: add params for ping timeout and max retries
...
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2024-09-24 22:49:49 +10:00
Thomas Watson
5f4a6dc2fb
AP_HAL_ChibiOS: remove dependency on tmpnam
...
tmpnam is never linked and not necessary, and naming it/redefining it
introduces problems on platforms that do have a definition.
2024-09-24 22:49:18 +10:00
Thomas Watson
380d8ca6fc
AP_Filesystem: remove dependency on tmpnam
...
tmpnam is never linked and not necessary, and naming it/redefining it
introduces problems on platforms that do have a definition.
2024-09-24 22:49:18 +10:00
Thomas Watson
8b63488431
AP_Scripting: remove dependency on tmpnam
...
tmpnam is never linked and not necessary, and naming it/redefining it
introduces problems on platforms that do have a definition.
2024-09-24 22:49:18 +10:00
Peter Barker
75073427a6
AP_SerialManager: avoid use of AP_HAL.h in config file
...
too easy to create loops with this
2024-09-24 11:59:13 +10:00
Peter Barker
82ac0ead72
AP_Terrain: create and use AP_Terrain_config.h
2024-09-24 11:59:13 +10:00
Peter Barker
4b1e1871c9
AP_Mount: create and use AP_Terrain_config.h
2024-09-24 11:59:13 +10:00
Peter Barker
a8cc071d62
AP_Filesystem: rearrange to put mission filesystem last
...
We're developing loops in our config files, move include to after base FILESYSTEM_READING/FILESYSTEM_WRITING defines
2024-09-24 11:59:13 +10:00
Peter Barker
ee830355d2
AC_PrecLand: remove assumption about how precland update method is called
...
this method may not be being called from the scheduler table. Have the callers pass in a true value instead
2024-09-24 10:56:57 +09:00
Peter Barker
3e1ad5dab6
AP_Compass: use memcmp to check whoami result code from HMC5843 device
...
Co-authored-by: muramura <ma2maru@gmail.com>
2024-09-24 11:52:47 +10:00
Peter Barker
9784e28148
AP_WheelEncoder: correct initialisation of WheelRateController objects
...
the existing constructer sets a slew rate limit to 0.2
This is essentially a missing patch from a previous series of PRs which moved dt from being a member variable to being passed into the update call for the PID
2024-09-24 10:46:34 +09:00
Peter Barker
17f501eea5
AC_PID: AC_HELI_PID: override the AC_PID::Default constructor
...
in place of the existing ordered-fields constructor
2024-09-24 11:43:20 +10:00
Peter Barker
4663382b01
AC_AttitudeControl: use AC_PID defaults to tidy heli rate PID initialisation
...
makes it look like the Copter initialisation - ie. legible
2024-09-24 11:43:20 +10:00
Peter Barker
6a74a97bf7
AC_AttitudeControl: use AC_PID defaults to tidy rate Sub PID initialisation
...
makes it look like multi ie. legible
2024-09-24 11:36:38 +10:00
bugobliterator
4d7b94c3cb
AP_DroneCAN: Fix constructor initialization order
...
bad ordering was leading to dronecan dna server getting initialised before canard interface is initialised leading
2024-09-24 11:29:34 +10:00
caijie
42c82f6c5d
AP_HAL_ChibiOS: add VUAV-V7pro
2024-09-24 10:07:39 +10:00
Peter Barker
1d91962b96
AP_GPS: move initialisation of some members into header
2024-09-24 09:30:05 +10:00
ARg
eb283ce607
SITL: correctly cast types for MegaSquirt error format string
...
`uint32_t` is `unsigned long int`, not `unsigned int`.
2024-09-24 09:00:29 +10:00
ARg
8204ff4d7c
AP_Filesystem: fix esp32 function datatypes
...
Make them match the superclass and the header file.
2024-09-24 09:00:29 +10:00
Andrew Tridgell
89c2b48286
AP_CANManager: ensure we only remove our own fwd registrations
...
keep a record of which bus we have registered a callback for and only
unregister with that bus. This prevents us unregistering a multicast
callback when disconnecting from MAVCAN
2024-09-23 21:01:22 +10:00
Andrew Tridgell
b98c7c5296
AP_CANManager: fixed de-registering CAN forwarding
...
this prevented MissionPlanner MAVCAN UI from working reliably as the
CANManager could think we are registered when we are not
2024-09-23 21:01:22 +10:00
Clyde McQueen
8b37100772
autotest: large outliers in sub terrain test have low sq
2024-09-23 19:14:34 +10:00
Peter Barker
44c1e9b896
AP_TemperatureSensor: allow AP_TEMPERATURE_SENSOR_DUMMY_METHODS_ENABLED to be overridden
2024-09-22 20:34:33 +10:00
Peter Barker
83c9b32093
AP_Scripting: add bindings for the AP_TemperatureSensor
2024-09-22 20:34:33 +10:00
muramura
0020cf5fe8
AP_Compass: Add existing devices
2024-09-22 10:11:50 +10:00
cuav-chen2
89a4571c58
AP_Compass: Add in BMM350 Driver
2024-09-21 10:08:36 +10:00
bugobliterator
7513281f65
AP_Scripting: add bindings get/set full mode for GPIO
...
allows setting alternate pin modes pin drive strengths etc.
2024-09-21 10:07:30 +10:00
Peter Barker
fb5c337328
AP_TemperatureSensor: specify units (degC) in comment for get_temperature
2024-09-19 12:37:50 -05:00
Rahul
7d907e9798
AP_TemperatureSensor: new MLX90614 sensor backend driver conversion fix
2024-09-19 22:29:24 +10:00
Ryan Friedman
aecb3268c7
AP_DDS: Correct compilation of tests without external odom
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-09-19 11:45:15 +10:00
muramura
c0d14ec397
GCS_MAVLink: Add conditions and delete the same processing
2024-09-19 11:44:57 +10:00
bugobliterator
3d47f01dd4
AP_HAL_ChibiOS: enable TESTs on CubePilot-PPPGW
2024-09-19 11:44:22 +10:00
bugobliterator
5acf25973e
AP_Networking: add connector loopback test for Ethernet
2024-09-19 11:44:22 +10:00
Rahul
86b6102267
AP_TemperatureSensor: new MLX90614 sensor backend driver added
2024-09-18 19:10:01 +10:00
Henry Wurzburg
8c3621d021
hwdef: add bdshot to SpeedyBeeF405Wing
...
Co-authored-by: setup <alxdr64m@gmail.com>
2024-09-18 17:51:26 +10:00
Henry Wurzburg
df90b640ca
AP_Scripting:Add parameter controller applet
2024-09-18 13:10:26 +10:00
Iampete1
c19e5713ae
GCS_MAVLink: Fix Airspeed without AHRS
2024-09-17 22:11:06 +10:00
Peter Barker
8b50f3b54b
AP_OSD: don't go via RCMap singleton to get RPTY RC channels
2024-09-17 22:10:53 +10:00
Ruffalo Lavoisier
e3f76591fc
AP_HAL_ChibiOS: check nullptr 'name' variable
...
- Check nullptr before using the 'name' variable assigned from malloc()
2024-09-17 22:10:26 +10:00
Thomas Watson
20d04fa823
AP_DroneCAN: DNAServer: remove preferred allocation support
...
Nothing is known to support it so it can't be tested. Removing it saves
flash and reduces complexity.
2024-09-17 22:10:08 +10:00
Thomas Watson
12a106333c
AP_DroneCAN: DNAServer: optimize allocation strategy
...
Number of allocation messages with 3 nodes (6 trials):
before: 44, 36, 35, 92, 107, 41
after: 28, 28, 28, 28, 26, 28
2024-09-17 10:42:05 +10:00
Ryan Friedman
dcfbf0ab69
AP_DDS: Add defines for experimental topics such as IMU
...
* Experimental topics, such as IMU, should have an easy way to be
disabled at compile time
* This demonstrates a pattern to add in new topics at compile time
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-09-17 10:40:59 +10:00
Oleksiy Protas
94f2eb4999
AP_Airspeed: Don't fail on REG_WHOAMI_RECHECK_ID
...
This prevents a false negative ID check for the cases when the AP is rebooted independently of the sensor, with the latter keeping a temporary ID that was set during initialization
2024-09-17 10:36:29 +10:00
Peter Barker
cd9e7e095a
hwdef: f103-GPS: explicltly nominiate compass backends supported
...
this target is overflowing as someone is trying to add a new compass..
2024-09-17 10:31:27 +10:00
Andy Piper
71e2b756af
AC_AttitudeControl: introduce ANG log message for high resolution attitude logging
...
Move RATE message to AC_AttitudeControl_Logging.cpp
2024-09-17 10:12:35 +10:00
Andy Piper
64a1fda05a
AP_Scheduler: record and make available the last sample time
2024-09-17 10:12:35 +10:00
junan
71a69367df
AP_HAL_Linux: file descriptor leaking and other issues in "Storage" of Linux.
...
- Fixed the fd leaking issue in "_storage_create" found by @peterbarker
- Remove the unnecessary call of "unlinkat" in "_storage_create"
- Simplify the implementation of "init"
Signed-off-by: junan <junan76@163.com>
2024-09-17 10:09:05 +10:00
Andrew Tridgell
9cb3354ba0
hwdef: default CAN MCAST enabled for PPPGW builds
2024-09-17 10:02:29 +10:00
Andrew Tridgell
f065548866
hwdef: enable CAN multicast support in PPP gateways
2024-09-17 10:02:29 +10:00
Andrew Tridgell
cd14b2e1c5
AP_Networking: added multicast UDP CAN server
...
this allows for operation of CAN interfaces over UDP multicast
networking
2024-09-17 10:02:29 +10:00
Andrew Tridgell
cc930bd49f
AP_CANManager: update for new callback API
2024-09-17 10:02:29 +10:00
Andrew Tridgell
4a102e2f2b
AP_HAL: support more than 1 registered CAN callback
...
this allows for CAN MCAST and MAVCAN at the same time
2024-09-17 10:02:29 +10:00
Andrew Tridgell
21b6b1b229
AP_HAL: allow for multicast sockets in bootloader
2024-09-17 10:02:29 +10:00
Andrew Tridgell
05d43fd00b
HAL_ChibiOS: allow for MCAST UDP with no CAN link
...
this allows the CAN interface to operate without a CAN cable, allowing
for bridging of MCAST UDP CAN
2024-09-17 10:02:29 +10:00
Thomas Watson
db18d37ed2
AP_DroneCAN: DNAServer: avoid resetting when server node ID changes
...
Avoids confusing the user and removes weirdness with multiple servers
sharing the same storage. Does leak the registration for the old ID but
in the unlikely event the table fills up the user can simply reset the
database.
We keep the check for an existing registration to avoid dirtying the
storage every boot unnecessarily. We also factor out the deletion of an
existing registration (which is very unlikely but technically possible)
to save some flash.
2024-09-17 10:01:45 +10:00
Leonard Hall
ea226637c9
AC_AttitudeControl: Vector3f multiplication clean up
2024-09-17 09:59:55 +10:00
Leonard Hall
5e27e3111d
AC_AttitudeControl: Fix dt update order
2024-09-17 09:59:55 +10:00
muramura
b1b4ac8d58
AP_ExternalAHRS: Correct the judgment
2024-09-17 09:35:13 +10:00
Valentin Bugrov
167dd7f447
SITL: unify names in ILabs sim
2024-09-17 09:34:32 +10:00
Valentin Bugrov
2b3ee0e7e4
AP_ExternalAHRS: unify names in ILabs EAHRS handler
2024-09-17 09:34:32 +10:00
Bob Long
4a1e4ebcd6
RCOutput: initialize _esc_pwm_min and _esc_pwm_max
...
Further protection from potential dangerous behavior when these do not
get initialized for some reason.
2024-09-17 09:18:36 +10:00
Bob Long
8e707ef4e2
AP_DroneCAN: prevent invalid numbers spinning ESCs
...
This prevents bugs and misconfigurations from causing DroneCAN ESCs to
spin at full speed while the vehicle is disarmed.
2024-09-17 09:18:36 +10:00
shipp02
dcc526ec19
Copter: Give better error in opendroneid build when DID_ENABLE=0.
2024-09-17 09:17:24 +10:00
Iampete1
8318109546
GCS_MAVLink: add support for AIRSPEED message
2024-09-17 09:10:17 +10:00
Peter Barker
091ba2782c
RC_Channel: adjust description of aux function 90 (EK3 Source Set
2024-09-16 22:34:34 +10:00
Peter Barker
12d8a4d543
AP_Scripting: adjust description of aux function 90 (EK3 Source Set
2024-09-16 22:34:34 +10:00
Peter Barker
6d8f0decac
RC_Channel: rename EKF_POS_SOURCE to EKF_SOURCE_SET
...
Co-authored-by: Michelle Rossouw <michelleros128@gmail.com>
these data sources span more than just position
2024-09-16 22:34:34 +10:00
Yuxin Pan
d1562d5119
SITL: update baro param group info
2024-09-16 17:25:02 +10:00
Yuxin Pan
ac2751c17b
SITL: add baro param file
2024-09-16 17:25:02 +10:00
Valentin Bugrov
79bd82308c
SITL: Actualize InertialLabs sim
2024-09-14 19:29:02 +10:00
Valentin Bugrov
092a95e88c
AP_ExternalAHRS: add GCS mesages sending for the ILabs EAHRS
2024-09-14 19:29:02 +10:00
Valentin Bugrov
0344cc36ad
AP_ExternalAHRS: actualize ILabs EAHRS data processing
2024-09-14 19:29:02 +10:00
Andrew Tridgell
cbba88fccd
AP_Scripting: added 2nd supply voltage to SkyPower EFI driver
...
and accept both extended and 11-bit CAN
2024-09-14 09:24:03 +10:00
Ryan Friedman
2aa5db5e73
AP_ExternalAHRS: Remove GPS week comment
...
* It's a hold-over from MSP. None of AP handles 0xFFFF in a special way
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-09-14 09:18:33 +10:00
Andrew Tridgell
fea279b181
SITL: support more rangefinder orientations
...
allows for quadplane tailsitter rangefinders
2024-09-14 08:39:51 +10:00
Bob Long
72a013952c
AP_EFI: Hirth: fix sensor health bitmask
2024-09-13 18:52:48 +10:00
Bob Long
e32d3ceaf7
AP_EFI: Hirth: remove crankshaft sensor status
...
There is no crankshaft sensor status reported by this EFI. This line is
misleading and should be removed. The sensor health bitmask is already
logged elsewhere.
2024-09-13 18:52:48 +10:00
Andy Piper
ef1be6fe01
AP_RCProtocol: only update rc value for GHST on rc frames
2024-09-13 18:52:05 +10:00
Benjamin Menkuec
09286e6f53
AP_MSP: MSP_RAW_GPS cog should be decidegrees not centidegrees
2024-09-13 12:45:22 +10:00
muramura
9e28bec87a
AP_NavEKF3: use UINT8_MAX as flag value in place of 255
2024-09-13 09:17:17 +10:00
muramura
8b5c5fcdb7
AP_AHRS: use UINT8_MAX as flag value in place of 255
2024-09-13 09:17:17 +10:00
yuri-rage
cd4501e62d
AP_Scripting: add advance-wp.lua
2024-09-12 14:23:43 +10:00
muramura
a9a2696368
AP_Mission: Change the magic number to a defined value
2024-09-12 14:23:10 +10:00
muramura
68bb55841a
AP_HAL_ESP32: Change the magic number to a defined value
2024-09-12 14:23:10 +10:00
muramura
70046e0d58
AP_HAL_ChibiOS: Change the magic number to a defined value
2024-09-12 14:23:10 +10:00
weavVN
e5f4f87b9e
AP_ExternalAHRS: VectorNav: rename dataflash log message names
2024-09-12 14:22:54 +10:00
Bob Long
2c14176f6a
AP_EFI: fix ECYL log message
...
- Convert temperatures Celsius to match the docs
- Fix format specifier for CHT2
2024-09-12 14:22:39 +10:00
Andrew Tridgell
53a4b5a843
AP_Scripting: add handle_external_position_estimate binding
...
can be used for offboard navigation systems
2024-09-12 06:58:57 +10:00
Yuxin Pan
61afab2b70
SITL: remove params from whiltelist
2024-09-12 06:54:15 +10:00
Peter Barker
66a2788663
hwdef: RadioLinkPIX6 uses SPL06 driver
2024-09-11 18:27:47 +10:00
Wu
3f577793a1
AP_Baro: SPx06 adds Background mode
2024-09-11 18:27:47 +10:00
Wu
c70150e531
AP_Baro: add SPA06 to SPx06 driver
2024-09-11 18:27:47 +10:00
Andrew Tridgell
96cf157df9
AP_Networking: update comment
2024-09-11 16:11:22 +10:00
Bob Long
2b903d20b4
AP_ESC_Telem: tidy old calls to _telem_data
...
When #27755 was first opened, #26252 had not been merged yet. #26252
refactored a bit, but the change was not applied to #27755 . This commit
fixes that.
This should not change the behavior of the code.
2024-09-11 10:23:00 +10:00
Yuxin Pan
41ffc7c860
SITL: SITL.cpp parameters documentation update
2024-09-11 10:22:22 +10:00
koehlert
9beca76f44
GCS_MAVLink: fix includes to ap_message
...
"GSC_config.h" is needed for HIGHRES_IMU_ENABLED flag.
2024-09-11 08:57:24 +09:00
Andy Piper
bb2249f766
AC_AttitudeControl: record latest gyro value and time used for logging
...
move Write_Rate() to AC_AttitudeControl
move RATE log structure to AC_AttitudeControl
2024-09-10 16:33:04 +01:00