Commit Graph

4636 Commits

Author SHA1 Message Date
mattbooker 821ef1d4d9 Plane: Fixed divide by zero error when transitioning to guided 2022-10-07 08:22:48 +11:00
Andrew Tridgell a4762009f9 Plane: added release notes for 4.3.0beta2 2022-10-04 18:50:40 +11:00
Henry Wurzburg 164711a5c3 Plane: correct range for kff_thr_2_pitch 2022-10-04 12:27:15 +11:00
jackhong12 4a4f361a17 all: use CLASS_NO_COPY() macro 2022-10-04 11:23:04 +11:00
Peter Barker 9e0894c93a ArduPlane: add AP_GRIPPER_ENABLED 2022-10-04 10:58:34 +11:00
Michael du Breuil b7a8852747 Plane: Allow reseting target airspeed to the parameter value 2022-10-04 10:04:13 +11:00
Peter Barker 3a61c97221 ArduPlane: do not send MSG_RPM if RPM not enabled 2022-09-28 20:10:21 +10:00
Randy Mackay bd02186c19 Plane: version to 4.4.0-dev 2022-09-27 10:46:12 +10:00
yaapu e958c313a1 ArduPlane: fixed roll and pitch for OSD VTOL view 2022-09-27 10:04:10 +10:00
MatthewHampsey 1dc18ec85a Plane: reset yaw rate PID for scripting 2022-09-22 05:55:15 +10:00
Peter Barker dabf78c61f ArduPlane: add and use AP_CAMERA_ENABLED 2022-09-21 11:58:38 +10:00
Iampete1 fef42ecd8c Plane: log: only log yaw and steer PIDs when active 2022-09-20 11:21:54 +10:00
Iampete1 e585757338 Plane: Quadplane: remove motor PWM params check 2022-09-19 20:57:51 -04:00
Peter Barker e596f7ce83 Plane: add and use AP_RPM_ENABLED 2022-09-20 09:28:27 +10:00
Mirko Denecke 7add656588 ArduPlane: add 0 disable to FLTMODE_CH parameter doc 2022-09-20 09:24:42 +10:00
Peter Barker 81c138e0a4 Plane: remove logging of CMDI
This is a duplicate of the data logged into "MAVC"
2022-09-14 17:44:50 +10:00
Andrew Tridgell a217942e96 Plane: release notes for Plane 4.3.0beta1 2022-09-13 15:20:49 +10:00
Michael du Breuil dba90ec227 Plane: Don't send HWSTATUS by default 2022-09-13 14:27:06 +10:00
Iampete1 84922cba9a Plane: Quadplane: use new motors pre arm 2022-09-07 17:54:16 +10:00
Iampete1 6358a3c962 Plane: add min airspeed arming check and constrain for speed scailing 2022-09-06 09:01:26 +10:00
Iampete1 5a53e22886 Plane: correct extened range airspeed scailing limits 2022-09-04 10:54:41 +10:00
Andrew Tridgell 22cd568a4c Plane: removed use of "blended" earth frame accel 2022-08-21 18:51:59 +10:00
Andrew Tridgell 953b754074 Plane: release notes for 4.2.3 2022-08-21 14:13:11 +10:00
Andrew Tridgell 4894cc1742 Plane: prepare for 4.2.3beta3 2022-08-19 18:44:08 +10:00
Peter Barker 0d19d7646f ArduPlane: rename OpticalFlow class to AP_OpticalFlow
Brings us in-line with other classes in ArduPilot.

Removes ambiguity with AP_HAL::OpticalFlow which can cause compilation errors as we start to make code more portable across targets
2022-08-18 14:24:01 +10:00
Iampete1 2b0492e6aa Plane: disalow mode change during fence recovery if option is set 2022-08-17 17:21:30 +10:00
Iampete1 a8a1e619df Plane: only trigger fence action for new breaches 2022-08-17 17:21:30 +10:00
Iampete1 367984a6b8 Plane: set fence manual recovery on mode change 2022-08-17 17:21:30 +10:00
Mirko Denecke ba13f4d116 ArduPlane: remove unused limit_length calculation in overshoot 2022-08-16 12:05:00 +10:00
Randy Mackay c255b3b5b6 Plane: replace send-mount-status with send-gimbal-device-attitude-status 2022-08-15 20:29:25 -04:00
Peter Barker 3f4a472899 ArduPlane: move call to compass cal update up to AP_Vehicle 2022-08-16 10:06:44 +10:00
Michael du Breuil f183b21fc5 Plane: Support vtol landing options on NAV_VTOL_LAND
This allows the same mission to contain both circular and straight
landing items, and doesn't require on the fly tweaking
2022-08-15 17:05:00 -07:00
Andrew Tridgell 204a8cdc55 Plane: release notes for 4.2.3beta2 2022-08-10 06:09:23 +10:00
Peter Barker 127bf7aa09 ArduPlane: make terrain checks common between Copter and Plane 2022-08-09 14:31:14 +10:00
Andrew Tridgell 2e32c753b9 Plane: added arming check for terrain data 2022-08-09 14:31:14 +10:00
Iampete1 ee778dbd3a Plane: Quadplane: add option_is_set helper for Q_OPTIONS 2022-08-09 13:21:00 +10:00
Henry Wurzburg 905572eff5 ArduPlane: update logging bitmask metadata to new style 2022-08-09 11:38:16 +10:00
Iampete1 821053e580 Plane: Quadplane: allow servo auto trim for motors only tailsitter assist 2022-08-09 10:56:41 +10:00
Joshua Henderson a9da91bc8d Plane: add TECS Logbitmask to TECS constructor 2022-08-09 09:44:50 +10:00
Andrew Tridgell b133e98102 Plane: improve target airspeed in landing approach
if the user hasn't set TECS_LAND_ARSPD then we can use an airspeed
between ARSPD_FBW_MIN and TRIM_ARSPD_CM when on approach

this also fixes landing_desired_closing_velocity() to never go above
the landing target speed, so we don't try to speed up if we are
starting the landing sequence too early
2022-08-03 12:26:57 +10:00
Andrew Tridgell 54280c2ae0 Plane: update release notes for 4.2.3beta1 2022-08-02 18:07:42 +10:00
Henry Wurzburg 7bb947e4b4 Plane: change log bitmask metadata to refer to correct logs 2022-08-02 11:06:53 +10:00
Henry Wurzburg fcf29539de Plane: fix attitude/AOA logging and rates 2022-08-02 10:52:52 +10:00
Andrew Tridgell f9f0f60815 Plane: base yaw in overshoot on target speed not scaled speed
this prevents an oscillating due to the speed changing as we yaw,
resulting in a different yaw target
2022-08-02 07:49:34 +10:00
Andrew Tridgell 3201ecd381 Plane: added an arming check for VTOL land too short
this is meant to catch bad mission setup, especially for UGCS, which
planes waypoints right on top of the landing point
2022-08-02 07:49:34 +10:00
Andrew Tridgell 5bdd43457c Plane: in overshoot allow up to the Q WP speed
this prevents us using too much battery when we are a long way from
the landing point
2022-08-02 07:49:34 +10:00
Andrew Tridgell fa371b92a8 Plane: limit target accel in POSITION1
don't ask for more than 2* transition limit, and reset when we enter
overshoot case
2022-08-02 07:49:34 +10:00
Andrew Tridgell afd21298d5 Plane: adjust target vector for wind in overshoot
at low speeds we want to keep the nose pointed into the wind on
landings
2022-08-02 07:49:34 +10:00
Andrew Tridgell a1e7072cb1 Plane: cope with overshoot in POSITION1 VTOL land state
when we overshoot run a simple position controller that tries to point
the nose at the landing point and aims for the position2 speed
threshold
2022-08-02 07:49:34 +10:00
Iampete1 a592f76282 ArduPlane: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 2b8958f931 Plane: Fence moved to vehicle 2022-07-27 19:04:56 +10:00
Peter Barker b0bee613d4 ArduPlane: add and use AP_ICENGINE_ENABLE 2022-07-22 08:48:16 +10:00
Andrew Tridgell 25e317d6b1 Plane: check G_Dt to catch startup errors
this catches cases where constructors lead to G_Dt being incorrect
2022-07-21 14:21:17 +10:00
Iampete1 7c505ad0ff Plane: set defualt format version 2022-07-20 17:59:59 +10:00
Iampete1 040e08f4b1 Plane: tailsitter: dont check if flying its always true in vtol transtion 2022-07-20 17:40:08 +10:00
Iampete1 98887a984b Plane: FW approach: use abs value for loiter sum check 2022-07-20 17:02:07 +10:00
Iampete1 2bda3c44c6 Plane: FW approach: correct wrap on breakout direction check 2022-07-20 17:02:07 +10:00
Iampete1 2e342d7852 Plane: FW approach: allways use correct loiter direction 2022-07-20 17:02:07 +10:00
Iampete1 7a88dc9348 Plane: VTOL aproach threshold use path proprtion rarther than radius 2022-07-20 17:02:07 +10:00
Iampete1 3f410be344 Plane: log ATT on none quadplanes 2022-07-19 11:15:04 +10:00
Iampete1 dd2221338b Plane: fence: do not re-trigger if mode change for expected reason 2022-07-19 09:44:36 +10:00
Iampete1 90f2bf3ba2 Plane: remove duplicate last mode reason 2022-07-19 09:44:36 +10:00
Andrew Tridgell 28d2967883 Plane: allow for throttle control in MANUAL when disarmed
pass base throttle down to ICE subsystem to allow for throttle when
disarmed in MANUAL
2022-07-18 20:55:56 +10:00
Andrew Tridgell 5f5f70d20a Plane: fixed check for fixed wing approach QRTL start
ensure we are lined up, or we are at less than 0.5 of radius before we
switch to QRTL. This fixes the case where the stopping distance is
greater than the radius, prevening us from switching to QRTL while not
lined up with the landing point
2022-07-13 20:10:19 +10:00
Iampete1 712611c50e Plane: Quadplane: add yaw command model 2022-07-13 18:26:36 +10:00
Andrew Tridgell 3385d3ae62 Plane: support NAV_DELAY in plane
allow for delayed takeoff, and takeoff at a particular time (for swarm
takeoff)

also check for takeoff command in landing sequence arming check

this allows for takeoff->land->disarm->delay->arm->takeoff->land
missions
2022-07-12 10:34:26 +10:00
Iampete1 50024a6ec2 Plane: add AIS to ADSB stream rate 2022-07-12 09:39:54 +10:00
Andrew Tridgell 6a1e80a03a Plane: when ICE overrides throttle zero the vfwd integrator 2022-07-10 06:56:58 +10:00
Andrew Tridgell afb7b14703 Plane: don't failsafe when in RTL_AUTOLAND landing sequence
when in AUTO and already in the landing sequence then don't trigger a
failsafe
2022-07-06 17:47:48 +10:00
Andrew Tridgell 592f33bfaf Plane: fixed combination of passby and acceptance dist WP
when a user sets a passby distance we should calculate the turn point
based on the extrapolated distance, not the original waypoint

also simplify the passby logic using offset_bearing()
2022-07-04 10:26:47 +10:00
Henry Wurzburg 6bb567465a Plane: fixed misspellings of 'transition' 2022-07-01 11:54:16 -07:00
Mirko Denecke 463aed4b8f ArduPlane: fix Q_RTL_MODE parameter doc 2022-06-30 10:50:09 +10:00
Randy Mackay 8f54957530 Plane: do-mount-control specifies body-frame targets
this is a non-functional change
2022-06-29 10:56:48 +09:00
Andrew Tridgell 3fbe99ea4d Plane: prepare for 4.2.2 stable 2022-06-24 11:43:06 +10:00
Andrew Tridgell 3ffef61aec Plane: fixed int8_t wrap with FWD_BAT_VOLT_MAX
this could cause crazy throttle values when the ratio pushes us over
127
2022-06-23 09:25:03 +10:00
Iampete1 0cd1f605f6 Plane: Quadplane: always reset to QPOS_NONE on mode entry 2022-06-23 08:37:00 +10:00
murata 501bd61820 Plane: Initialize a string array 2022-06-22 17:25:56 +10:00
Iampete1 f2a162b963 Plane: rotate Qassist desired rates correctly 2022-06-21 10:01:30 +10:00
Iampete1 d251c51ca1 Plane: Quadplane: QRTL climb to QRTL alt first if in Q mode 2022-06-21 09:11:08 +10:00
Andrew Tridgell e9942f9a17 Plane: prepare for 4.2.2beta1 2022-06-17 14:09:09 +10:00
Andrew Tridgell 42f553626e Plane: adjust down default quadplane gains
make it better for a typical quadplane, the defaults were more
suitable on smaller aircraft
2022-06-16 21:26:49 +10:00
Peter Barker cfff881013 Plane: let AHRS update orientation in its own time 2022-06-12 17:32:11 +10:00
Iampete1 34609d327d Plane: Quadplane: force convertions of Q_M_PMW_* params if invalid and add arming check 2022-06-08 17:08:23 +10:00
Randy Mackay 402ea2b72d Plane: remove unused MSG_GIMBAL_REPORT 2022-06-07 09:27:47 +10:00
Andrew Tridgell 6423a2dfb9 Plane: use pos_control for weathervane attitude
this makes no difference as wp_nav just passes through, but right API
to call
2022-06-03 18:19:53 +10:00
Andrew Tridgell ae6b877fd3 Plane: added Q_NAVALT_MIN
this is equivalent to copters WP_NAVALT_MIN parameter for takeoff. Not
implemented for land yet

this is useful for vehicles with significant GPS velocity noise on
takeoff, preventing dragging the landing gear
2022-06-03 18:19:53 +10:00
TunaLobster df0a75a0bb Plane: Change throttle_override to pass in current throttle value 2022-05-26 11:30:41 -07:00
TunaLobster 9e26556408 AP_ICEngine: Add redline governor and RPM filter
Adds a top end governor to protect the engine from exceeding design limits. Similar to idle governor.
Adds a LPF at 0.5 Hz for RPM.
2022-05-26 11:30:41 -07:00
Andrew Tridgell 14a3e8b20c Plane: release notes for 4.2.1 2022-05-23 17:37:31 +10:00
Andrew Tridgell fa26b69298 Plane: fixed false positive in landing detector
this fixes a case where we can get false positive on the landing
detector for quadplanes.

The issue happens if we cross the LAND_DESCEND to LAND_FINAL threshold
while pilot repositioning is active, with stale information in
landing_detect.lower_limit_start_ms as we don't run should_relax() in
LAND_DESCEND
2022-05-23 13:05:17 +10:00
Iampete1 b017fc2196 ArduPlane: allow FBWB alt control option in LOITER
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2022-05-22 12:09:43 +10:00
Andrew Tridgell 56db91d0c3 Plane: 32 servo conversion 2022-05-22 12:07:37 +10:00
Henry Wurzburg a3336f3d4f Plane: Add P/D only tune sets for quadplanes 2022-05-21 09:10:31 +10:00
Andrew Tridgell 5664f75ced Plane: update release notes for 4.2.1beta1 2022-05-19 17:11:20 +10:00
Andrew Tridgell 53a7866ba3 Plane: cope with QGC retrying AUTO mode
QGC tries several times to enter AUTO even when it is refused. We need
to keep refusing
2022-05-19 06:11:57 +10:00
Andrew Tridgell 86c2404654 Plane: increased safety of guided -> auto quadplane takeoff
when we arm in guided mode then enter a special guided_wait_takeoff
state. We keep motors suppressed until one of the following happens

  1) disarm
  2) guided takeoff command
  3) change to AUTO with a takeoff waypoint as first nav waypoint
  4) change to another mode

while in this state we don't go to throttle unlimited, and will refuse
a change to AUTO mode if the first waypoint is not a takeoff. If we
try to switch to RTL then we will instead use QLAND

This state is needed to cope with the takeoff sequence used by QGC on
common controllers such as the MX16, which do this on a "takeoff"
swipe:

  - changes mode to GUIDED
  - arms
  - changes mode to AUTO
2022-05-18 06:43:16 +10:00
Andrew Tridgell a22e181acb Plane: account for sprung throttle in VTOL throttle suppression
when RC_OPTIONS has been changed to not check throttle for arming then
treat this like a sprung throttle for quadplane throttle suppression
in auto-throttle modes, and only unsuppress when throttle goes above
trim+dz
2022-05-15 21:17:50 +10:00
Andrew Tridgell 20f641de99 Plane: refuse arming if we are in a landing sequence
this helps when the aircraft has gone into a landing sequence due to a
failsafe before it is armed. Arming while in the landing sequence is
very unlikely to be what the user wants
2022-05-15 21:17:50 +10:00
Peter Barker d5fdc2027f ArduPlane: support *10 multipler when storing/retrieving radius in NAV_LOITER_TURNS 2022-05-11 17:40:35 +10:00
Peter Barker 6152b8618f ArduPlane: remove handling of MAVLINK_MSG_ID_SET_HOME_POSITION
We decided to remove this after 4.2 was out in favour of
MAV_CMD_DO_SET_HOME which has been available since 2015.

The gcs-maintainers list was notified in Feburary.
2022-05-10 09:46:22 +10:00
Andrew Tridgell 86d2ccf0e7 Plane: update gyro fft throttle
allows for updating or learned FFT freq
2022-05-10 08:08:56 +10:00
Andrew Tridgell 8aba79b8a0 Plane: release notes for 4.2.0 2022-05-04 10:33:50 +10:00
Peter Barker e2e3e228b3 ArduPlane: tidy includes 2022-05-03 09:14:58 +10:00
Mirko Denecke d6bca7405a ArduPlane: fix auxiliary typo 2022-05-02 10:55:08 +10:00
Andrew Tridgell 12d829e740 Plane: release notes for plane 4.2.0beta6 2022-04-28 18:19:40 +10:00
Peter Barker 91e784f28d Plane: do not use guided waypoint for loiter location
Currently this waypoint is set 10,000m away by the avoidance behaviour

Instead, immediately enter loiter mode
2022-04-21 06:59:39 +10:00
Henry Wurzburg 0d01ac389c Plane: add Q_OPTION for RTL always on RC failsafe for ship landing 2022-04-19 19:58:46 +10:00
Andrew Tridgell 15084cb6f3 Plane: moved harmonic notch update code to AP_Vehicle 2022-04-19 09:39:03 +10:00
Andrew Tridgell 7aafd5cf98 Plane: param conversion for INS_NOTCH to INS_HNTC2 2022-04-19 09:39:03 +10:00
Andrew Tridgell d57abb1230 Plane: support harmonic notch on 2nd RPM sensor 2022-04-19 09:39:03 +10:00
Andrew Tridgell c1d841dd93 Plane: support two full harmonic notch filters 2022-04-19 09:39:03 +10:00
Sanket Sharma 594160daf3 Plane: Updated highest airspeed limit when armed 2022-04-18 14:54:57 +10:00
Andrew Tridgell 627f62d23b Plane: param conversion for INS_NOTCH to INS_HNTC2 2022-04-16 08:14:06 +10:00
Peter Barker fd4a00a654 ArduPlane: stop libraries including AP_Logger.h in .h files
AP_Logger.h is a nexus of includes; while this is being improved over
time, there's no reason for the library headers to include AP_Logger.h
as the logger itself is access by singleton and the structures are in
LogStructure.h

This necessitated moving The PID_Info structure out of AP_Logger's
namespace.  This cleans up a pretty nasty bit - that structure is
definitely not simply used for logging, but also used to pass pid
information around to controllers!

There are a lot of patches in here because AP_Logger.h, acting as a
nexus, was providing transitive header file inclusion in many (some
unlikely!) places.
2022-04-08 19:18:38 +10:00
Andrew Tridgell 3bdcff263d Plane: release notes for 4.2.0beta5 2022-04-07 10:07:25 +10:00
Andrew Tridgell 8e37c93e7d Plane: fixed rudder control when ARMING_RUDDER != 2
when rudder disarm is disabled we should allow full yaw control
regardless of throttle level. We should also only disable left yaw
when throttle is at zero, as right yaw does not indicate pilot may be
trying to disarm
2022-04-03 09:12:03 +10:00
Peter Barker 2c42c056d8 Plane: correct EnableLandResponsition->EnableLandReposition 2022-03-31 20:30:55 +11:00
Mark Whitehorn 910406e82d Plane: handle AIRBRAKE RC option 2022-03-29 22:51:10 +01:00
Andrew Tridgell c32a2d542c Plane: added release notes for 4.2.0beta4 2022-03-28 20:55:43 +11:00
Andrew Tridgell 48881eeb55 Plane: fixed yaw on the ground when rudder disarming in AUTO
when a quadplane touches down in an auto throttle mode the pilot may
use rudder to disarm. The check for rudder disarm was only active in
modes without auto-throttle. This expands it to all modes if the
throttle has hit the lower limit
2022-03-24 07:44:40 +11:00
Andrew Tridgell 680162cef0 Plane: added a value for RTL_AUTOLAND to disable arming check
set RTL_AUTOLAND=3 to get go-around but not RTL DO_LAND_START usage
2022-03-23 20:22:58 +11:00
Andrew Tridgell 27cbe5dbbb Plane: prevent rapid RTL/AUTO switching on fence breach
don't switch back to RTL if already in a DO_LAND_START sequence
2022-03-23 20:21:59 +11:00
Andrew Tridgell d82a306cc2 Plane: when shutting down motors force outputs to minimum
this fixes issue #20354 where a long spool time can lead to motors
running without control for an extended period of time.
2022-03-23 18:20:42 +11:00
Peter Barker 2784f8fa7f Plane: remove persistent guided_WP_loc state
So instead of updating plane.guided_WP_loc and then calling
set_guided_WP(void) to copy that state into plane.next_WP_loc we pass
the new location in the call to set_guided_WP(const Location &loc).

avoidance was the only place which was not entirely over-writing
plane.guided_WP_loc.  However, plane.next_WP_loc was updated to be the
current location when we entered guided mode.  If we update the
horizontal/vertical avoidance now it is relative to the current
location, not the guided wp location, which could be quite important.
2022-03-22 10:14:40 +11:00
Peter Barker 1f5165349e Plane: correct compilation when airspeed disabled 2022-03-20 21:47:05 +11:00
Andrew Tridgell 2c22cbc50e Plane: update release notes for 4.2.0beta3 2022-03-18 21:13:54 +11:00
Henry Wurzburg 14700063d2 ArduPlane: convert floating point divides into multiplys 2022-03-18 15:26:44 +11:00
Andrew Tridgell 6ebefbdb16 Plane: added airspeed based pitch limit check
prevent using too much pitch when at low airspeed, which can lead to
severe instability in SLT quadplanes
2022-03-18 13:36:16 +11:00
Andrew Tridgell eabdaae1e7 Plane: use set_lean_angle_max_cd()
allows for a wider range of Q_TRANS_DECEL while landing on the desired
landing point
2022-03-18 13:36:16 +11:00
Andrew Tridgell cc6fc2b130 Plane: improvements to POSITION1 controller
this improves 4 things in the POSITION1 controller based on logs from
4.2.0beta2. The changes are designed to increase the tolerance to
an incorrect value for Q_TRANS_DECEL, reducing landing overshoot

1) we fix the initialisation of the acceleration. The
   init_xy_controller() function assumes zero accel, so we need to
   call set_accel_desired_xy_cmss() just after that init to get the
   correct accel. Thanks to Leonard for this fix

2) if we decel more than expected due to too low Q_TRANS_DECEL we
   need to reduce the target speed, rather than putting the nose down

3) lower the default Q_P_JERK_XY to a value more appropriate for most
   quadplanes (Leonard suggested a value of 2)

4) fixed the pitch envelope from Q_BACKTRANS_MS to start after the
   airbrake phase is complete
2022-03-18 13:36:16 +11:00
Andrew Tridgell 3772029450 Plane: fixed pitch envelope after AIRBRAKE
we need to setup last_fw_mode_ms and last_fw_nav_pitch_cd when we
enter POSITION1 mode so that the expanding envelope pitch limit from
Q_BACKTRANS_MS is applied correctly
2022-03-18 13:36:16 +11:00
Andrew Tridgell 8b16b5ca94 Plane: adjust throttle mix for auto landing
use mix-max during landing approach and initial descent, use min in
land final. As discussed with Leonard
2022-03-18 13:35:46 +11:00
Peter Barker d93449ac28 ArduPlane: split AP_HAL_SITL and HAL_SIM_ENABLED 2022-03-17 14:39:55 +11:00
Tim Tuxworth 21ec47f184 Plane: Display Fence Breach message in GCS
Send a "Geofence breach" message to the Ground Control Station. Without this when the fence is breached and if anything happens as a result, such as RTL, it will happen silently.
2022-03-16 18:04:19 +11:00
Andrew Tridgell a1856c5c22 Plane: added an arming check for Q_ASSIST_SPEED
Q_ASSIST should really be enabled for all non-tailsitter
quadplanes. This arming check will help users remember to configure it
2022-03-16 09:29:14 +11:00
Andrew Tridgell 82937ca778 Plane: check that RTL_AUTOLAND is set if using DO_LAND_START 2022-03-14 09:52:41 +11:00
Andrew Tridgell 0ca48fa9da Plane: added release notes for 4.2.0beta2 2022-03-10 13:44:05 +11:00
Andrew Tridgell 55c46cd868 Plane: protect against short stop_distance 2022-03-10 13:41:18 +11:00
Andrew Tridgell 5e14b9efe6 Plane: use pos control for most of LAND_FINAL
this gives more accurate landing with some velocity drift
2022-03-10 07:34:20 +11:00
Andrew Tridgell cc9b9813cb Plane: review fixes
thanks Pete!
2022-03-10 07:34:20 +11:00
Andrew Tridgell f09c715d7a Plane: wait till motors are fully up before takeoff in guided mode
this allows for guided mode takeoff in tilt-rotors. Otherwise motors
till be pointing forward and takeoff will go very badly
2022-03-10 07:34:20 +11:00
Andrew Tridgell 3659669409 Plane: cope with high angle error in airbrake state
if we are flying too far off the target vector then exit airbrake
state. This prevents flying for a long distance away from the landing
point in airbrake mode
2022-03-10 07:34:20 +11:00
Andrew Tridgell f9ecf15973 Plane: setup target accel in POSITION1 state 2022-03-10 07:34:20 +11:00
Andrew Tridgell 2864e21b31 Plane: allow for a trans decel margin
so if we are behind the velocity curve we are less likely to overshoot
landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell 33bc067edf Plane: fix NAV_CONTROLLER_OUTPUT in Q modes
Q modes don't always use wp_nav, but do use pos_control

AUTO and QRTL setup the plane navigation as well, so can use the L1
data
2022-03-10 07:34:20 +11:00
Andrew Tridgell 3fe9a55269 Plane: added APIs for lua ship landing 2022-03-10 07:34:20 +11:00
Andrew Tridgell c54fb0f51b Plane: link in AP_Follow
ready for ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell 72087335f7 Plane: removed terrain home correction 2022-03-10 07:34:20 +11:00
Iampete1 a7bc844780 Plane: never stick mix without valid RC input 2022-03-09 18:26:30 +11:00
Iampete1 c46a19bf89 ArduPlane: tailsitter: keep attitude controll throttle level upto date for smoother controller handover 2022-03-09 18:21:51 +11:00
Andrew Tridgell 8ccf84d9a3 Plane: disallow mavlink disarm while flying
this relies on is_flying(), and we will need to watch for reports of
the heuristics failing
2022-03-09 17:13:45 +11:00
RuffaloLavoisier 962d1d112b ArduPlane : Indentation correction 2022-03-08 14:24:46 -08:00
RuffaloVM d8085f71af ArduPlane : case label indentation 2022-03-08 14:24:46 -08:00
Andrew Tridgell 6d63e1f7d3 Plane: added Q_LAND_ALTCHG parameter
this is the threshold height change over 4 seconds for a landing to be
detected. It can be raised if landing detection is very slow
2022-03-09 07:50:10 +11:00
Iampete1 54e57ccff0 Plane: don't prevent stick mixing in none RC failsafe 2022-03-08 11:21:13 +11:00
Peter Barker 302c8e4b98 ArduPlane: rename within_min_dz to in_min_dz for consistency
... consistency with in_trim_dz
2022-03-08 11:17:45 +11:00
Andrew Tridgell 08d53c2d64 Plane: change master version to 4.3.0dev 2022-03-02 07:44:36 +11:00
Andrew Tridgell ad53ee7f0e Plane: added release notes for 4.2.0beta1 2022-03-02 07:43:59 +11:00
Peter Barker c0aa20b1d0 ArduPlane: include cleanups 2022-03-01 11:21:33 +11:00
Henry Wurzburg 0c32e71272 ArduPlane: clarify and simplify RC failsafe messages 2022-03-01 11:05:15 +11:00
Peter Barker 452a5df0cc ArduPlane: add RebootRequred to stream rate parameters 2022-03-01 11:01:12 +11:00
Iampete1 80f8f8b14e Plane: quadplane: double log QPOS state change 2022-03-01 10:59:07 +11:00
Iampete1 c26ffed47f Plane: motor_test: use PWM min and max from RC_Channel 2022-03-01 10:47:25 +11:00
Peter Barker b19bfba0ec Plane: use has_valid_input in place of checking throttle counter 2022-03-01 10:29:37 +11:00
Peter Barker 13fa1e30ad ArduPlane: rename and make enum RC_Channel::ControlType
Type:: is too generic; get_type should probably be get_control_type
2022-02-27 09:55:01 +11:00
Andrew Tridgell b444420329 Plane: removed controller error in transmitter tuning 2022-02-22 12:23:48 +11:00
Andrew Tridgell e3e125c307 Plane: prepare for 4.1.7 2022-02-21 12:11:28 +11:00
Iampete1 267583db55 Plane: quadplane: never reset yaw target rates when entering QPOS1 2022-02-21 09:35:06 +11:00
Iampete1 9fd14dbf94 Plane: quadplane: set IO failsafe limit for all motors 2022-02-17 12:31:16 +11:00
Iampete1 42a2e1094c Plane: set failsafe limit for throttle left and right 2022-02-17 12:31:16 +11:00
Andrew Tridgell 1bdc9b5bf8 Plane: fixed in_vtol logic so QRTL can AIRBRAKE 2022-02-16 07:43:01 +11:00
Andrew Tridgell aab6c94936 Plane: don't weathervane in AIRBRAKE state
this prevents unwanted VTOL motor throttle while trying to slow
down. In this stage the slaving of yaw rate to fixed wing roll control
is sufficient
2022-02-16 07:43:01 +11:00
Andrew Tridgell 2846f87eeb Plane: reduce height gain in auto landing for tiltrotors
avoid running the motors while tilted past the tilt max if we are in
AIRBRAKE state. This stops a large amount of forward thrust from the
tilted motors while trying to slow down, while still maintaining
attitude control
2022-02-16 07:43:01 +11:00
Andrew Tridgell 5bb7b04343 Plane: added release notes for 4.1.7beta1 2022-02-12 09:00:51 +11:00
Peter Barker 458d43fc1e ArduPlane: send deprecated message warning for MAVLINK_MSG_ID_SET_HOME_POSITION 2022-02-10 12:13:43 +11:00
Iampete1 1ca1707f9f Plane: quadpalne: keep motors interlock state upto date with E-stop 2022-02-10 07:43:40 +09:00
Peter Barker d914e4e63b Plane: convert next WP alt to global frame in POSITION_TARGET_GLOBAL_INT 2022-02-09 16:09:41 +11:00
Peter Barker 10be59da17 ArduPlane: create and use location_from_command_t 2022-02-09 09:15:11 +11:00
Peter Barker e1314cc297 Plane: remove ancient convert_mixers 2022-02-08 12:19:55 +11:00
Peter Barker 4068d57930 Plane: correct spelling of mode_lotier_qland 2022-02-08 12:19:03 +11:00
Peter Barker 7c0b1f46d6 Plane: remove logging of STRT message
SType is always 3 - and we're just about to log the entire
mission so CTOT is pointless
2022-02-08 12:18:16 +11:00
Henry Wurzburg e82ad1ec24 ArduPlane: fix error in Tricks on a Switch qualifier 2022-02-08 11:54:38 +11:00
Peter Barker bab79d0094 ArduPlane: stop passing mission in Terrain constructor
Terrain can use the mission singleton

This means Copter can have terrain while compiling mission out
2022-02-08 11:20:20 +11:00
Peter Hall 717b18a680 Plane: quadplane: add allow_weathervane transtion class method 2022-02-08 10:38:16 +11:00
Peter Hall 6a719664d3 Plane: quadplane: pass takeoff and landing state to weathervane 2022-02-08 10:38:16 +11:00
Gone4Dirt a79359dc67 Plane: use new weathervane library 2022-02-08 10:38:16 +11:00
Peter Barker dd06a93c06 Plane: remove unused TRUE/FALSE defines 2022-02-07 21:20:21 +11:00
Peter Barker 9878701095 Plane: remove unused DEBUG define 2022-02-07 21:20:21 +11:00
Peter Barker 90310f4c6e Plane: remove unused 'ALT_CONTROL' enumeration 2022-02-07 21:20:21 +11:00
Henry Wurzburg ea9d35c99d ArduPlane: extend nav_scripting to all modes 2022-02-07 21:19:28 +11:00
Hwurzburg ad30d476c8 Plane: enforce acro rate limits in aerobatics scripting 2022-02-07 12:35:31 +11:00
Hwurzburg 0efb2f2048 Plane: disable TECS use during NAV_SCRIPT_TIME 2022-02-07 12:34:15 +11:00
murata f8383df5a4 Plane: Remove meaningless semicolons 2022-02-07 08:27:34 +09:00
Bill Geyer 54bdde8845 Copter: fix parameter issue with quadplane 2022-02-01 23:06:51 -05:00
Bill Geyer 9bec232c8a Plane: modify qautotune to use of multi subclass 2022-02-01 23:06:51 -05:00
Peter Hall 9ec1faf3f9 Plane: tailsitter: rate limit second half of FW transtion 2022-01-26 19:03:32 +11:00
Peter Barker d6c653bdc5 ArduPlane: move logging of SIMSTATE, AHRS2 and POS into AP_AHRS library 2022-01-25 10:59:17 +11:00
Peter Barker 266d384ca7 ArduPlane: rename AP_AHRS::get_position to get_location 2022-01-25 10:47:22 +11:00
Iampete1 f725f7bb7e Plane: set new slew limit and inherit slew limt for flaps 2022-01-25 10:12:13 +11:00
Joshua Henderson c1abcfb7c4 Plane: move Airspeed to AP_Vehicle 2022-01-19 18:21:32 +11:00
Josh Henderson 6dc5a9fc54 Plane: GCS move airspeed sensor status flags up 2022-01-19 18:21:32 +11:00
Josh Henderson 9a3fed0263 Plane: move high_latency_air_temperature up 2022-01-19 18:21:32 +11:00
Andrew Tridgell 3273ead11b Plane: use EKF climb rate estimate in VFR_HUD.climb
EKF estimate is both more accurate and less noisy
2022-01-18 13:26:31 +11:00
Iampete1 32488a5e3a Plane: add MOTB logging at 10hz 2022-01-18 10:18:10 +11:00
Jaaaky 852546f8cf ArduPlane: fix man_expo pitch & rudder params/variables 2022-01-12 18:27:08 +11:00
Peter Barker 0cf4254290 ArduPlane: move RPM sensor logging into AP_RPM 2022-01-11 11:09:26 +11:00
Iampete1 3a5c7ea8fc Plane: quadplane: add transtion fail action param 2022-01-11 11:02:33 +11:00
Peter Hall b64ddb9ac0 Plane: tailsitter: only set limit flags if outputs are configured 2022-01-11 10:37:38 +11:00
Peter Hall 2ffebebddc Plane: tailsitter: provide min throttle limit based on disk therory outflow velocity 2022-01-11 10:37:38 +11:00
Iampete1 0fa1ddf7c2 Plane: tailsitter: always give pitch prority elevon mixing in VTOL modes 2022-01-11 10:37:38 +11:00
Iampete1 d473344177 Plane: add video stab log bit and log in ahrs_update 2022-01-05 19:56:03 +11:00
Iampete1 ca1b5b1db2 Plane: Quadplane: use get_frame_and_type_string 2022-01-05 19:51:19 +11:00
Peter Barker 89e3e27d3d ArduPlane: move INS notch filter logging into INS 2022-01-05 16:34:36 +11:00
Peter Barker 173f36c145 ArduPlane: make vehicles write notch log messages 2022-01-05 16:34:36 +11:00
Peter Hall d4eb2c6396 Plane: quadplane: QPOS_POSITION1 tailsitters use input_vel_accel method 2022-01-04 10:42:12 +11:00
Iampete1 4848ac9166 Plane: quadplane: don't use `is_active_z()`, becasue its wrong 2022-01-04 10:42:12 +11:00
Iampete1 fb1f6b57ad Plane: Quadplane: never run Z controller if motors are not throttle unlimited 2022-01-04 10:42:12 +11:00
Peter Hall c215fa0745 Plane: Quadplane: never run Z controller in tailsiter VTOL transtion 2022-01-04 10:42:12 +11:00
Peter Hall 9df753551e Plane: quadplane: tailsitter: always relax pitch after transtion 2022-01-04 10:42:12 +11:00
Peter Hall d054ca0426 Plane: quadplane: limit post VTOL transtion pitch rate on tailsitters in maunal modes 2022-01-04 10:42:12 +11:00
Peter Hall 67d7ba490f Plane: quadplane: pass time to tailsitter.in_vtol_transition where avalable 2022-01-04 10:42:12 +11:00
Iampete1 9634641323 Plane: tailsitter: rate limit pitch up in VTOL pos control flight. 2022-01-04 10:42:12 +11:00
Andrew Tridgell 2691022e12 Plane: update release notes for 4.1.6 2022-01-03 13:11:18 +11:00
Andrew Tridgell 2251293ec7 Plane: fix stabilize mode
should self-level. Broken by #19171
2022-01-03 08:09:53 +11:00
Iampete1 abe9e4425b Plane: quadplane: remvoe unused loiter initial pitch varable 2021-12-31 08:46:31 +11:00
Andrew Tridgell fb019eb0f3 Plane: add a low pass filter to speed scaler
this is needed due to the filtering done on the target rate in
AC_PID. With a low filter rate in AC_PID a step in the speed scaler
results in a step in the FF output due to the mismatch in the
instantaneous SS and the filtered target rate
2021-12-29 18:36:05 +11:00
Peter Barker e55eea961f ArduPlane: create and use AP_OPTICALFLOW_ENABLED 2021-12-29 18:12:03 +11:00
Andrew Tridgell 336b666f83 Plane: fixed stick mixing and throttle nudge in QRTL approach
thanks to Henry for noticing this
2021-12-28 16:04:12 +11:00
Peter Barker d7fae5263f ArduPlane: adjust for rename of OpticalFlow.cpp 2021-12-28 10:16:20 +11:00
Samuel Tabor a715472353 Plane: Specify starting location to set_offset_altitude_location 2021-12-27 11:27:52 +11:00
Hwurzburg 18e427d27d Plane: add Q_OPTION to force fw trans on fail instead of QLAND 2021-12-24 13:55:15 +11:00
Iampete1 2154738421 Plane: Quadplane: only advance to QPOS_POSITION2 once tilts have finished slewing 2021-12-22 18:46:14 +11:00
Iampete1 eac52fe08f Plane: quadplane: don't ouput VTOL throttle on tiltrotor with no VTOL motors and till fully forward 2021-12-22 18:46:14 +11:00
Iampete1 6116eaeb32 Plane: quadplane: enhance tiltrotor transtion to better deal with tiltrotors with all motors tilting 2021-12-22 18:46:14 +11:00
Andy Piper aefc97fafa Plane: use calculated number of notches for dynamic harmonic 2021-12-22 18:13:38 +11:00
Andrew Tridgell db0f06fb58 Plane: update release notes for 4.1.6beta1 2021-12-21 13:21:50 +11:00
Peter Barker 278899e44c ArduPlane: tidy log message id definitions
Add a comment indicating only 20 ids are available to the vehicle
2021-12-21 10:42:18 +11:00
Jaaaky 50430d9fc8 ArduPlane: Fix multi #include's 2021-12-21 10:38:46 +11:00
Iampete1 055d90d49b Plane: tailsitter: add gains to scale control surface vs motors 2021-12-21 10:14:34 +11:00
Gone4Dirt d244a0b803 Plane: Make RPM log independant of RC log mask 2021-12-16 12:48:48 +11:00
Samuel Tabor c44fed34d4 AP_Soaring: Override airspeed and flap angle. 2021-12-16 07:12:24 +11:00
Peter Barker 08a8b3f155 Plane: use @CopyValuesFrom for FLTMODEn parameters 2021-12-16 07:11:33 +11:00
Iampete1 8aa4a802f3 Plane: tiltrottor: add missing ff terms 2021-12-14 10:14:28 +09:00
Andrew Tridgell c746efff4f Plane: updated release notes for 4.1.5 2021-12-13 10:55:44 +11:00
Hwurzburg 049f5f2135 Plane: fix divide by zero in transition time 2021-12-10 19:10:51 -08:00
Andrew Tridgell 1c89b7f3a2 Plane: check for VTOL takeoff in AUTO
if the "only arm in Q modes" bit is set in Q_OPTIONS then check that
in AUTO mode we are in a VTOL takeoff WP
2021-12-07 12:51:18 +11:00
Hwurzburg 274111a5ea ArduPlane: clean up short failsafe 2021-12-07 10:09:33 +11:00
Andrew Tridgell 522056d6f7 Plane: release notes for 4.1.5beta1 2021-12-04 18:06:38 +11:00
Andrew Tridgell ca13503f41 ArduPlane: revert compass parameter changes 2021-12-04 16:51:53 +11:00
Andrew Tridgell e7c7cdd653 Plane: reset VTOL takeoff if not armed
we need to reset the takeoff target position while disarmed so we
don't use spurious position information from before we get good GPS
lock.

also remove the "Resetting previous waypoint" message as it doesn't
provide useful information and is just a distraction (it would be
printed continuously while waiting for arming with this PR)
2021-12-04 16:51:02 +11:00