Commit Graph

3466 Commits

Author SHA1 Message Date
Randy Mackay d15a5f9dcb Copter: THR_ACCEL_IMAX default to 800 2014-09-12 15:11:48 +09:00
Randy Mackay 224122958c Copter: reduce throttle to min once landed in RTL
This catches the case where the vehicle lands but the user doesn't
immediately put the throttle to zero.  Before this check it would
continue to attempt to hold it's
2014-09-12 14:16:05 +09:00
Randy Mackay eac26cdd0f Copter: THR_ACCEL_IMAX param range increased 2014-09-12 14:16:04 +09:00
Randy Mackay a12d9109e0 Copter: remove thr check during init_arm_motors
This check is redundant now that we have a check within the arm_check()
function.
Removing this check does raise a slight danger that someone could raise
the throttle after arming but before the gyro and baro calibration has
completed but the delay has been greatly shortened from what it once was
so there is much less danger that someone could approach the vehicle
during the short arming delay.
2014-09-11 21:13:35 +09:00
Randy Mackay 5720bff29f Copter: AC3.2-rc9 release notes 2014-09-11 20:38:56 +09:00
Randy Mackay 906b3dfbec Copter: AC3.2-rc8 release notes 2014-09-11 16:54:04 +09:00
Randy Mackay 4c6b0bb1cb Copter: format change to flight mode default defined
This also kicks off the build for AC3.2-rc8
2014-09-11 16:52:36 +09:00
Randy Mackay 48bc1456d0 Copter: increase Rate PID param ranges
RATE_RLL_P to 0.25 (was 0.20)
RATE_PIT_P to 0.25 (was 0.20)
RATE_YAW_P to 0.50 (was 0.25)
RATE_YAW_I to 0.05 (was 0.02)
2014-09-10 16:40:36 +09:00
Craig Elder ea82caf7a4 Copter: Parameters.pde
Corrected typo in parameter description
2014-09-09 12:34:59 -07:00
Randy Mackay 0d7a999fc1 Copter: arming check that throttle is low 2014-09-09 23:02:18 +09:00
Randy Mackay 294f836c8c Copter: never send unhealthy terrain status
Copter does not yet rely on the terrain data (it's for informational
purposes only) so we will temporarily disable the failure flags to the
GCS to avoid support calls
2014-09-09 22:19:20 +09:00
Randy Mackay bf18fb896a Copter: send extended status to GCS only after initialisation 2014-09-09 22:17:46 +09:00
Randy Mackay 21d56735ca Copter: increase EKF_CHECK_THRESH default to 0.8
Also remove unused #define related to inertial nav check (now removed)
2014-09-09 14:59:27 +09:00
Randy Mackay 9c613cd1ec Copter: reduce alt hold defaults
Throttle Rate P to 5.0 (was 6.0)
Throttle Accel P to 0.5 (was 0.75)
Throttle Accel I to 1.0 (was 1.5)
2014-09-07 22:14:40 +09:00
Randy Mackay db12df2237 Copter: minor ReleaseNotes format change
This also helps to kick off the build of AC3.2-rc7
2014-09-04 16:19:02 +09:00
Randy Mackay 05233fbf02 Cotper: AC3.2-rc7 release notes 2014-09-04 15:41:10 +09:00
Randy Mackay 641c8317a5 Copter: pre-arm consistency check of gyros 2014-09-04 15:21:58 +09:00
Randy Mackay 28f31166b9 Copter: land check gets overall throttle and rotation rate check
add check that overall throttle level is below the non-takeoff throttle
instead of just checking that it's motors have hit their lower limits
because low limits can also be caused by high yaw rotation requests.
Absolute climb rate requirement reduced to 30cm/s
2014-09-04 15:21:51 +09:00
Randy Mackay 05a37dd54d Copter: add short delay to arming to allow RC input
The short delay gives time for the RC inputs to be processed which
removes the chance of a false-positive on the "late frame" radio check.
A false positive could lead to an immediate disarm right after arming.
2014-09-04 15:11:57 +09:00
Randy Mackay 59404c25e3 Copter: pre-arm consistency check of accels 2014-09-03 13:51:44 +09:00
Randy Mackay 4a06941a39 Copter: individual accel and gyro status to GCS 2014-09-03 11:22:51 +09:00
Randy Mackay d7343d5dc7 Copter: check all gyros and accels in pre-arm check 2014-09-03 11:22:49 +09:00
Randy Mackay 818b3b74f6 Copter: sanity check throttle deadzone 2014-09-02 12:40:15 +09:00
Jason Short 82481f30a3 Copter: move drift thr assist to separate function
no changes in functionality.
2014-08-31 14:22:56 +09:00
Randy Mackay 48d143d4ef Copter: minor format change to release notes
This also helps kick off the rebuild so AC3.2-rc6 appears in the mission
planner
2014-08-31 12:29:37 +09:00
Randy Mackay ebfd828087 Copter: update AC3.2-rc6 release notes
forgot compass-not-calibrated bug fix
2014-08-31 12:06:03 +09:00
Randy Mackay d04a4834fa Copter: update AC3.2-rc6 release notes
Forgot to add GPS driver buffer overflow item
2014-08-31 12:02:00 +09:00
Randy Mackay 13f994d3ad Copter: AC3.2-rc6 release notes 2014-08-31 11:55:06 +09:00
Randy Mackay 07420521ab Copter: default LAND_REPOSITION to 1 2014-08-31 10:44:09 +09:00
Jason Short 0dd9797fe6 Copter: restore CLI set parameter feature
Added back the ability to set params from CLI
2014-08-31 10:36:42 +09:00
Randy Mackay cf98cc29b5 Copter: throttle deadzone parameter
Allows increasing or decreasing the deadband size in AltHold, Loiter,
PosHold flight modes
2014-08-29 15:54:34 +09:00
Randy Mackay eb51a8e5da Copter: pre-arm check of internal vs ext compass 2014-08-26 22:34:06 +09:00
Randy Mackay 2b0a7c59bc Copter: remote arming check reference to compass learning 2014-08-26 22:34:04 +09:00
Randy Mackay 63d0cddfa4 Copter: make landing detector more strict
Made more strict by requiring 50 consecutive iterations where the climb
rate is below +- 40cm/s.  Previously it was 50 cumulative.

Removed check of failsafe.radio when clearing the land flag because it
could result in the vehicle taking off if the user picked it up.
2014-08-25 21:12:05 +09:00
Randy Mackay 65ed77e803 Copter: ensure motors don't stop during flip 2014-08-23 23:40:13 +09:00
Randy Mackay e1e010c504 Copter: remove unused flip_stop 2014-08-23 23:40:11 +09:00
Randy Mackay 4184c1d6e5 Copter: flip minor comments and formatting 2014-08-23 23:40:09 +09:00
Jason Short 882edaf787 Copter: add pitch axis flipping
Added Pitch axis flipping. You must be pushing forward or back 3° to make it flip in Pitch axis or it will flip in the default roll axis.
Added some extra throttle control to maintain altitude
removed the CH7 ability to exit Flip mode. It will exit only if completing flip or user aborts with control sticks.
2014-08-23 23:40:07 +09:00
Randy Mackay a83a47682d Copter: remove get_angle_targets_for_reporting fn
this saves a tiny amount of time by removing the memory copy of a
Vector3f
2014-08-22 22:56:21 +09:00
Andrew Tridgell 7618ffde63 Copter: show firmware version on param fetch
fixes pull #1320

thanks Arthur!
2014-08-22 21:13:11 +10:00
Randy Mackay 7d350735df TradHeli: update AttControlHeli constructor
reference to rc_1, rc2 are replaced with constant updates during
acro_run
2014-08-22 16:29:02 +09:00
Randy Mackay 2cd6d986d5 TradHeli: call passthrough_bf_roll_pitch_rate_yaw 2014-08-22 16:29:00 +09:00
Robert Lefebvre 968f1d64ae Logging: Fix comment error. 2014-08-22 16:28:54 +09:00
Robert Lefebvre a4f710a363 TradHeli: Add yaw-only rate request function for flybar acro mode. 2014-08-22 16:28:52 +09:00
Robert Lefebvre 3316fe8f63 TradHeli: Reset flybar passthrough to false when exiting Acro mode. 2014-08-22 16:28:50 +09:00
Robert Lefebvre f5ddaab35b TradHeli: Set Flybar passthrough mode in Acro Initialization function. 2014-08-22 16:28:47 +09:00
Robert Lefebvre 82061bc65d TradHeli: Add pointer for pilot roll/pitch inputs to attitude_control constructor. To be used for flybar passthrough. 2014-08-22 16:28:40 +09:00
Randy Mackay c87283af98 Copter: remove inav check
the EKF check works reliably but attempts to check the inertial nav for
errors has not been successful.  I could not find a way to reliably
catch flyaways without also introducing false positives (and thus
unwanted LANDings)
2014-08-20 14:39:56 +09:00
Andrew Tridgell a627cd2af2 Copter: run Linux boards at 100Hz for now
we should be able to do 400Hz in future
2014-08-19 20:03:33 +10:00
Randy Mackay a693907429 Copter: add ACRO_EXPO param values 2014-08-19 12:51:27 +09:00
Andrew Tridgell 90f306cd3c Copter: set GPS non-blocking
the new GPS driver only ever needs a non-blocking port
2014-08-19 10:08:17 +10:00
NullVoxPopuli e578fb1615 Copter: add A-Tail to FRAME parameter description 2014-08-18 14:31:03 +09:00
priseborough 162b824424 Copter : Distinguish between EKF and INAV errors 2014-08-18 14:17:50 +09:00
Randy Mackay ccc8068443 Copter: range check ACRO_EXPO to be no more than 1 2014-08-18 12:56:22 +09:00
Randy Mackay fcc5c7c12e Copter: update master firmware ver to AC3.3-dev
Further AC3.2 fixes will appear in the ArduCopter-3.2 branch
2014-08-18 11:45:54 +09:00
Randy Mackay f490a289de Revert "Copter: use rcmap when sending radio_in to GCS"
This reverts commit 716f625924.
2014-08-16 20:31:24 +09:00
Randy Mackay 716f625924 Copter: use rcmap when sending radio_in to GCS 2014-08-16 15:27:49 +09:00
Randy Mackay 5b114dcad5 Copter: remove unused WP_OPTION definitions
This also kicks off the build for AC3.2-rc5
2014-08-16 12:18:48 +09:00
Randy Mackay 7202aa00da Copter: remove compass learn of offsets
This saves 1k of flash and the interference on most copters makes this
option unusable anyway.
2014-08-16 10:45:11 +09:00
Randy Mackay 515cb7c671 Copter: AC3.2-rc5 version and release notes 2014-08-14 21:38:56 +09:00
Randy Mackay 0a88281a76 Copter: bug fix to rally point alt
rally point library uses absolute altitudes, we were passing in relative
altitudes which caused the vehicle to climb before heading to the rally
point
2014-08-14 21:09:54 +09:00
Randy Mackay 6fc5014a84 Copter: increase sonar timeout to 1sec
Contributed by Julien Dubois.
2014-08-14 19:37:00 +09:00
Randy Mackay 7686660c73 Copter: use baro healthy() 2014-08-14 16:03:23 +09:00
Randy Mackay 1e374ab42b Copter: report baro health to GCS 2014-08-14 16:02:49 +09:00
Leonard Hall 85213dccbf Copter: Autotune Fix 2014-08-14 11:47:40 +09:00
Randy Mackay f3fd79597f Copter: add ACRO_EXPO parameter 2014-08-14 11:47:37 +09:00
lthall 3ba1c0c4aa Copter: ACRO add expo
adds 30% expo to roll and pitch
2014-08-14 11:47:06 +09:00
Andrew Tridgell e260f1c569 Copter: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Randy Mackay 4723ed5e6e Copter: rename EKF check's error message to dataflash
It checks more than the compass so the old error message was misleading.
2014-08-09 15:48:42 +09:00
Randy Mackay af7e5a75e9 Copter: correct EKF_CHECK parameter description 2014-08-09 15:32:54 +09:00
Randy Mackay 0518439841 Copter: move relay from ch6 to ch7/ch8 2014-08-09 13:37:12 +09:00
Randy Mackay 226e42f1d7 Copter: rename EKF_CHECK_THRESH parameter 2014-08-07 21:43:57 +09:00
Andrew Tridgell 4d284a695d Copter: fix for changed AP_Terrain API 2014-08-06 17:59:19 +10:00
Randy Mackay e5f89baab0 Copter: increase RATE IMAX param desc ranges
Also remove unused STB_RLL_I and STB_RLL_IMAX descriptions because these
parameters no longer exist
2014-08-06 13:24:10 +09:00
ggregory8 013b1333b1 Copter: Add guided_takeoff_start and guided_takeoff_run functions 2014-08-05 10:25:33 +09:00
ggregory8 e8b0c7a7e7 Copter: Handle MAV_CMD_NAV_TAKEOFF command to takeoff in guided mode only 2014-08-05 10:25:31 +09:00
ggregory8 3832c46998 Copter: Add takeoff enum for guided_mode 2014-08-05 10:25:29 +09:00
Randy Mackay 610e747f27 Copter: minor formatting fix 2014-08-04 21:04:10 +09:00
Randy Mackay 52a3dc2bde Copter: reset target alt to current alt when landed 2014-08-04 16:56:03 +09:00
Randy Mackay 279aff87f2 Copter: bug fix to land-detector
vehicle should become un-landed only when throttle out is above the
get-non-throttle-takeoff value
2014-08-04 16:53:39 +09:00
Randy Mackay c7ba44db2d Copter: increase ekf check threshold for inav
This increases the accel correction from 60cm/s to 80cm/s before the ekf
check will trigger a land
2014-08-04 15:06:37 +09:00
Randy Mackay 7b9fa1ea79 Copter: rate IMAX increase to 1000 2014-08-04 11:31:02 +09:00
Randy Mackay b8f98aba8f Copter: fix baro glitch resolved message in dataflash
Caught by Julien Dubois, thanks!
2014-08-04 09:11:21 +09:00
Randy Mackay b29f8968ce Copter: clarify EKF check msg to GCS
remove "compass" from the error message because the failure can also be
caused by GPS glitches
2014-08-02 16:14:20 +09:00
Randy Mackay 8a07701d07 Copter: remove ch6 tuning of INAV_TC
Users normally never change these parameters and if by chance they do want
to, they can set them before flying
2014-08-01 15:14:42 +09:00
Randy Mackay d386ac6f85 Copter: remove unused local var from Flip 2014-08-01 15:14:42 +09:00
Randy Mackay e17da607b1 Copter: remove empty Telemetry.pde 2014-08-01 15:14:41 +09:00
Randy Mackay 4e2683421c Copter: disable parachute and rally on APM1 2014-08-01 15:14:40 +09:00
Randy Mackay 3e6e776360 Copter: of-loiter unavailable if OPTFLOW not enabled
of-loiter was small but still present even when optflow was disabled
2014-08-01 15:14:32 +09:00
Randy Mackay 004eb168fb Copter: remove unused var from ekf check 2014-08-01 15:06:19 +09:00
Andrew Tridgell 81230ab518 Copter: disable dump_log when no APM2 2014-08-01 15:57:28 +10:00
Andrew Tridgell a49d133d2a Copter: disable Log_Read if no CLI 2014-08-01 15:46:28 +10:00
Randy Mackay 7a2288523e Copter: version and release notes for AC3.2-rc4 2014-08-01 13:56:09 +09:00
Randy Mackay 2c0699c9ed Copter: auto-disarm in Drift, Sport, OF_Loiter 2014-07-31 22:58:43 +09:00
Randy Mackay b52f8351e8 Copter: rename EKFCHECK_COMPASS to EKFCHECK_THRESH
Renamed because this threshold is now used for both compass and velocity
variance.
Also minor reorganisation of ekfcheck but no functional change.
2014-07-31 22:58:43 +09:00
priseborough d9bb3965ac Copter: prevent false triggering of ekf_check 2014-07-31 22:58:29 +09:00
Randy Mackay 85b4ba6142 Copter: Thr and Batt failsafe disarm when landed
When throttle/radio failsafe or battery failsafe are triggered, the
vehicle will disarm if it is landed even if the throttle is not at zero.
Auto mode will disarm if landed and mission has not started.  This
ensures that the vehicle does not disarm during a mission land command
that appears mid way through a mission.
2014-07-31 15:00:06 +09:00
Randy Mackay 77d5b2171e Copter: rename control_modes.pde to switches.pde 2014-07-31 15:00:04 +09:00
Randy Mackay b09568ffb5 Copter: use hal.rcout to send servo output to GCS 2014-07-30 17:31:11 +09:00
Andrew Tridgell 3ccac6736d Copter: rename TELEM2_PROTOCOL to SERIAL2_PROTOCOL
this matches SERIAL2_BAUD
2014-07-30 14:49:10 +10:00
Matthias Badaire 147e91877e Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:19 -07:00
Andrew Tridgell 91ec4e56d5 Copter: fixed ESC calibration on Pixhawk
this ensures motors are armed after safety is pressed, and also gives
print out of channel inputs and outputs on USB console for debug
purposes

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-07-29 13:59:28 +10:00
Randy Mackay c9667131dd Copter: log flight mode after arming 2014-07-29 11:43:47 +09:00
Randy Mackay 55f679b54b BaroGlitch: shorten param prefix to BAROGLTCH_ 2014-07-28 22:21:46 +09:00
Randy Mackay 7cc1501dc6 Copter: integrate baro glitch protection 2014-07-28 22:16:20 +09:00
Andrew Tridgell b36e4b4122 Copter: avoid integer underflow in mavlink txspace check 2014-07-27 22:18:51 +10:00
Randy Mackay df4bc3d617 Copter: pass motor_mask to ServoRelayEvents 2014-07-26 16:33:26 +09:00
Randy Mackay 71cbcacf50 Copter: fix arming tone to sound before arming
Also fixed bug in which vehicle could appear to be armed (according to
LEDs) but is not.  This could occur if pilot had raised the throttle
very high during the calibration that happens just before arming.
2014-07-25 13:09:07 +09:00
Andrew Tridgell cda78aa2c3 Copter: fixed auto-doc prefix for TERRAIN 2014-07-25 13:12:10 +10:00
Andrew Tridgell 8e65e5bff0 Copter: replace HAVE_AP_TERRAIN with AP_TERRAIN_AVAILABLE 2014-07-25 07:59:54 +10:00
Andrew Tridgell 8d04deff6a Copter: added terrain status reporting 2014-07-24 21:50:20 +10:00
Andrew Tridgell 0562907d9f Copter: added AP_Terrain library 2014-07-24 21:46:06 +10:00
Andrew Tridgell e9fedbdb79 Copter: removed use of removed MAV_CMD_NAV_ commands 2014-07-24 21:40:16 +10:00
akdslr dc67058771 ArduCopter: Removed CONFIG_SONAR_SOURCE, SONAR_SOURCE_ADC, and SONAR_SOURCE_ANALOG_PIN since no longer used 2014-07-24 14:41:55 +10:00
akdslr 06fa2e3f60 ArduCopter test: Renamed the test from sonar to rangefinder and added info on all devices 2014-07-24 14:41:55 +10:00
akdslr 1354cd7120 ArduCopter Parameters: Changed the SONAR prefix to RNGFND, renamed SONAR_GAIN, and CH6-8 value descriptions 2014-07-24 14:41:54 +10:00
Supergoldfish 13563f4344 Copter: added Sonar Voltage reporting to GCS mavlink
Rangefinder class will return 0 if not applicable.
2014-07-23 20:57:36 +09:00
Randy Mackay e9861de2ac Copter: fix to drift's yaw rate
The ACRO_P parameter needs to be multiplied by the roll and pitch
velocities to calculate the final yaw rate
2014-07-23 17:13:08 +09:00
Randy Mackay 7bda6cbadf Copter: integrate EKF check
Check runs at 10hz
Log ekf check failures and ekd failsafes
2014-07-22 23:13:25 +09:00
Randy Mackay a4a4334b13 Copter: add EKFCHECK_COMPASS parameter 2014-07-22 23:13:22 +09:00
Randy Mackay 65bc498d4e Copter: add ekf check of compass
Checks the EKF's compass variance or the inertial navigations x and y
acceleration corrections
2014-07-22 23:13:20 +09:00
Randy Mackay eb696e247b Copter: CLI report_compass prints results for all compasses 2014-07-22 22:01:25 +09:00
Randy Mackay 3c702e5fc5 Copter: compass mot configures all compasses 2014-07-22 22:01:24 +09:00
Randy Mackay af28270669 Copter: bug fix for throttle failsafe
Missing bracket could cause throttle failsafe to be triggered even when
disabled or motors disarmed
2014-07-21 20:58:16 +09:00
lthall 9202149fb1 Copter: integrate pre-takeoff throttle feedback
This feature slightly revs the motors in response to the pilot's input
before takeoff AltHold, Loiter, AutoTune, PosHold and Sport flight modes

pair-programmed with Randy Mackay
2014-07-18 11:41:50 +09:00
Randy Mackay 11678ba936 Copter: remain landed until throttle output above 25 percent 2014-07-18 11:41:46 +09:00
lthall edd7334544 Copter: add pre_takeoff throttle feedback
pair-programmed with Randy Mackay
2014-07-18 11:41:28 +09:00
Randy Mackay e339149044 Copter: update AC3.2-rc3 ReleaseNotes yet again 2014-07-17 14:27:03 +09:00
Randy Mackay 73fcfbd174 Copter: add no-break to case to resolve compiler warning
This also helps kick off the auto builder for AC3.2-rc3
2014-07-17 12:10:45 +09:00
Randy Mackay eb762bc890 Copter: update AC3.2-rc3 Release Notes 2014-07-17 11:52:07 +09:00
Randy Mackay df28db1361 Copter: minor formatting update 2014-07-17 11:49:38 +09:00
Craig Elder 07d43534c1 Copter: Change Radio Failsafe Timeout
Change Radio Failsafe Timeout from 2 seconds to 200ms
2014-07-16 19:41:43 -07:00
Craig Elder 3c9c943b67 Copter: Change Radio Failsafe Timeout
Change Radio Failsafe Timeout from 2 seconds to 200ms
2014-07-16 11:03:29 -07:00
Craig Elder e85c9f078d Copter: Change Radio Failsafe Timeout
Change Radio Failsafe Timeout from 2 seconds to 200ms
2014-07-16 11:02:32 -07:00
Randy Mackay 34984cc2d1 Copter: update AC3.2-rc3 Release Notes 2014-07-16 17:55:04 +09:00
Jonathan Challinger fc34a2fed1 Copter: updated AttitudeControl ctor call to reflect changes 2014-07-16 14:40:58 +09:00
Randy Mackay b6ef3dc5d7 Copter: add parenthesis around ntun log bitmask
Resolves one compiler warning
2014-07-16 14:40:45 +09:00
bugobliterator 2fd165d023 Copter: Add esc_calib to as an app in cli
Usage Notes:
- when in cli mode select setup
- inside setup use esc_calib <chan_mask> to launch esc calibration
  e.g. esc_calib 1010 : enable calibration for Motor 2 and Motor 4
2014-07-14 09:44:36 +10:00
Andrew Tridgell 49954a3a61 Copter: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell fa4abdb0ae Copter: added support for MPU9250 2014-07-14 09:44:34 +10:00
Robert Lefebvre 022425584b TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM. 2014-07-13 17:11:30 +09:00
Robert Lefebvre 4b9aea2c55 Parameters: Update Tune Comments with new options 2014-07-13 17:11:27 +09:00
Robert Lefebvre aff98e34e5 TradHeli: Force recalc scalers after setting main loop time in MotorsHeli so that ramp scalers are right for 32-bit. 2014-07-13 17:11:25 +09:00
lthall f53181ec66 Copter: Acro balance fix 2014-07-13 15:51:49 +09:00
Andrew Tridgell 71d2333ea8 Copter: changes for more common mavlink code 2014-07-13 15:37:50 +10:00
Andrew Tridgell 28f251005b Copter: fixed typos in parameter markup 2014-07-12 11:26:15 +10:00
Randy Mackay 7f9cd20377 Copter: set UARTs non-blocking at end of initialisation
Previously we were setting to non-block after arming but this reduce the
chance of bumping into a NuttX USB driver issue that can cause the uart
to become unresponsive and also makes Copter consistent with Plane
2014-07-11 15:27:29 +09:00
Randy Mackay 34bc136a6c Copter: AC3.2-rc3 version and release notes 2014-07-11 14:18:48 +09:00
Randy Mackay 65e5367619 Copter: rename hybrid to poshold 2014-07-11 14:09:01 +09:00
Randy Mackay 0fc73a0a21 Copter: rename control_hybrid to poshold 2014-07-11 14:06:53 +09:00