Randy Mackay
b4b9d80c2f
Copter: bug fix to accept HIL accel values correctly
2013-03-19 11:33:58 +09:00
John Stäck
46a831fc03
Copter: add parameter "set" and "show" commands to setup menu.
...
Squashed commit of the following:
commit 4243a0bb89de2f850606c623aac6a5b583c333ae
Author: John Stack <stack@spotify.com>
Date: Thu Mar 7 09:28:16 2013 +0100
Undo change to system.pde, not needed.
commit dae2dbbbd6e13621fccc1d0a221aae8d83240417
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 22:47:50 2013 +0100
Remove leftover bits of old menu setup
commit ccefc8fe0d237364b06a1478348f8552720d7598
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 22:40:30 2013 +0100
Roll the param menu into setup.
commit c61dad17bf32a3080d8eca2389c6e25f98767545
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 08:08:42 2013 +0100
Make the param menu a compile-time option, by defining PARAM_MENU
commit 0f35c4e88ec7aba5035b4880e9994e4783da75a9
Author: John Stack <stack@spotify.com>
Date: Wed Mar 6 07:57:22 2013 +0100
Use find(), which works well.
commit 3b81b29597fcee49193330d7b6d3f3aed99a476c
Author: John Stack <stack@spotify.com>
Date: Tue Mar 5 07:57:33 2013 +0100
Whitespace fixes
commit 6b9ccc5fe1de1e40a24eb9ff89006b9bd80e3662
Author: John Stack <stack@spotify.com>
Date: Tue Mar 5 07:28:20 2013 +0100
Add cli menu to change any parameter.
2013-03-18 15:49:41 +09:00
Andrew Tridgell
952c56e990
Copter: fixed barometer init in HIL sensors mode
2013-03-18 16:20:25 +11:00
Andrew Tridgell
ac06b5e62d
Copter: remove unused function
2013-03-18 16:20:25 +11:00
Randy Mackay
36834e77b5
Copter: remove support for CLI Slider
2013-03-18 14:07:04 +09:00
Randy Mackay
597a4b912a
Copter: fix to allow building HIL_MODE_SENSORS
2013-03-18 13:41:52 +09:00
Randy Mackay
d1344e8c39
Copter: remove #define for CROSSTRACK_GAIN
...
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
2013-03-17 16:56:18 +09:00
Randy Mackay
1b6fcad90a
Copter: remove tilt compensation parameter
...
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
2013-03-17 16:53:32 +09:00
Randy Mackay
61e29173e3
Copter: remove unused crosstrack variables and parameters
...
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
2013-03-17 16:46:31 +09:00
Randy Mackay
a1295c042b
Copter: fix init of wp_verify_byte so wp alt is always required
2013-03-17 16:37:30 +09:00
Randy Mackay
fdcb78ccf7
Copter: leonard's smoother alt-hold transition
...
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
2013-03-17 13:24:49 +09:00
Randy Mackay
37040adfaa
Copter: bug fix for auto missions over 320m
...
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
2013-03-17 11:14:35 +09:00
Randy Mackay
150046f2b8
Copter: GPS Failsafe implemented
...
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
2013-03-16 17:27:46 +09:00
Randy Mackay
f9539384a1
Copter: rename failsafe to failsafe_radio
...
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay
f263e81ed7
Copter: remove unused GPS and baro filters
...
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
2013-03-16 00:20:15 +09:00
Randy Mackay
5380973225
Copter: only start delay timer after reaching wp location and altitude
2013-03-06 12:50:41 +09:00
Randy Mackay
a73f50494c
TradHeli: remove duplicate RC_FAST_SPEED definition
2013-03-04 23:45:23 +09:00
Randy Mackay
cb6ffc7acf
Copter: minor formatting fix for report_ins
2013-03-04 23:14:14 +09:00
Randy Mackay
998511f506
Copter: use unsigned long for dataflash log for gps time
...
Updated some formatting of comments in the same file
2013-03-04 23:13:06 +09:00
Randy Mackay
33bd984a91
Copter: remove unused input_voltage parameter
2013-03-03 23:23:54 +09:00
Randy Mackay
cb84ec9d9b
Copter: add current based compass compensation
2013-03-03 23:02:36 +09:00
Andrew Tridgell
c2fd1512ff
Copter: use voltage_average() so as to avoid INPUT_VOLTS
2013-03-03 16:16:01 +11:00
Randy Mackay
0d5e731a65
Copter: add compassmot to cli
...
Allows user to setup compensation for motor's interference on the
compass
2013-03-02 17:54:18 +09:00
Randy Mackay
476a6d0164
Copter: fix for acro throttle bug
2013-03-02 10:28:44 +09:00
Randy Mackay
6b2b69535f
Copter: Compass log stores/retrieves motor offsets
2013-03-02 00:03:20 +09:00
Randy Mackay
d8515ff85e
Compass: basic compensation for motor interference
2013-03-02 00:03:16 +09:00
Andrew Tridgell
637ecd5279
Copter: updates for new dataflash API
2013-03-01 07:18:26 +11:00
Andrew Tridgell
9a3bd17cfb
Copter: fixes for new DataFlash API
2013-03-01 07:18:25 +11:00
Randy Mackay
e0506bd622
Copter: inav circle initial implementation
2013-02-26 11:35:35 +09:00
Randy Mackay
c8f09ac219
Copter: fix compile error for PX4 re Compass logging
2013-02-25 13:26:58 +09:00
Randy Mackay
d6ff5ae261
Copter: add roll-pitch slew for auto modes
...
Added reporting of roll, pitch inputs for ACRO, AUTO
2013-02-24 14:42:04 +09:00
Randy Mackay
e297ba7d18
Copter: update default loiter gains for inertial nav
2013-02-24 14:42:00 +09:00
Randy Mackay
102b5da59d
Copter: remove unnecessary #defines from APM_Config.h
2013-02-24 14:41:56 +09:00
Randy Mackay
cbde042ec5
Copter: remove non-inav loiter and wp controllers
...
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
2013-02-24 14:41:52 +09:00
Randy Mackay
609676e26c
Copter: add logging of compass values
...
Removed rarely used ITERM because we didn't have enough bits in the log
mask
2013-02-24 14:41:48 +09:00
Randy Mackay
6f27bc7ae5
Copter: remove filters from inav loiter
2013-02-24 14:41:44 +09:00
Randy Mackay
1410063a14
Copter: new ROLL_PITCH_WP_INAV roll-pitch mode
...
small corrections to allow waypoints to work with new inertial nav wp
controller
2013-02-24 14:41:40 +09:00
Randy Mackay
574756908d
Copter: set wpinav controller targets in nav calls
...
All navigation commands now properly set wpinav controller targets
except CIRCLE related commands.
2013-02-24 14:41:36 +09:00
Randy Mackay
00bc28adcc
Copter: take-off code cleanup
...
remove redundant setting of loiter target.
explicitely set throttle mode to THROTTLE_AUTO
2013-02-24 14:41:32 +09:00
Randy Mackay
67c69a19ee
Copter: remove baro-only alt hold
...
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
2013-02-24 14:41:29 +09:00
Randy Mackay
37d3e1d7e4
Copter: add zero slope checks to wpinav
...
also added RTL fix to set wpinav target explicitly
2013-02-24 14:41:25 +09:00
Randy Mackay
b74da54c98
Copter: enable inav xy by default
2013-02-24 14:41:21 +09:00
Randy Mackay
53ab1d5d9b
Copter: add advance track call to actually move towards waypoint
...
Also added unrelated check that waypoint is valid before updating
waypoint distance.
2013-02-24 14:41:17 +09:00
Randy Mackay
766ccdf6f8
Copter: add selection of inertial nav wp controller to APM_Config.h
2013-02-24 14:41:13 +09:00
Randy Mackay
fcf102b2cf
Copter: inertial nav waypoint controller
...
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
2013-02-24 14:41:09 +09:00
Jason Short
4c3ee76900
AC: Moving flip speed back to 400°/s to prevent oscillation around change in speed.
...
Would like to add a more gradual speed change in the finish. Might require a new state as the copter passes -90°
2013-02-23 13:14:15 +09:00
Jason Short
7d5b975da2
AC: Flip code fix
...
Flight tested it today and made some flips. Throttle adjusted in Manual throttle modes. Not tested in AP throttle modes such as alt hold.
2013-02-23 13:14:11 +09:00
Randy Mackay
8e4c9518ea
Copter: increase low voltage check to 10.5v
...
Change requested by Rob Lefebvre and Richie Wilson
2013-02-23 00:36:51 +09:00
Jason Short
abd0fb9099
AC : global static variables should not be initialized to zero
2013-02-22 17:34:18 +09:00
Andrew Tridgell
4c7a1a1806
Copter: change PX4 main baud rate back to 115200
...
we now use USB console
2013-02-22 07:04:23 +11:00
Randy Mackay
2ecf34e509
Copter: update version to 2.9.1 ahead of release
2013-02-19 13:52:04 +09:00
Randy Mackay
d48aebea8e
Copter: updated release notes for 2.9.1-rc2
2013-02-19 13:49:53 +09:00
Randy Mackay
9904e9f4db
Copter: update firmware version to 2.9.1-rc1
2013-02-19 13:43:36 +09:00
Randy Mackay
6601bd37cf
Copter: integrate automatic roll and pitch trims
2013-02-19 12:51:24 +09:00
Michael Oborne
61e5b09f28
Send FS state to gcs for AC
2013-02-09 10:11:36 +08:00
Andrew Tridgell
19a282dad0
Copter: removed use of ins.temperature()
2013-02-07 15:05:47 +11:00
Pat Hickey
d418197898
ArduCopter: fixed memory unsafe member access in GCS_MAVLINK
...
* Smokey, this is not 'Nam. this is bowling. there are rules
2013-02-02 22:43:56 -08:00
Randy Mackay
9d34ead486
Copter: fix up some casting issues for wp_distance
2013-02-01 22:42:50 +09:00
Randy Mackay
df1c0d92bd
Copter: manual throttle scaling fix
...
Scaling of bottom half of throttle was changed from THR_MIN ~ 500.
Previously it was from 0 ~ 500.
2013-02-01 22:37:33 +09:00
Randy Mackay
a0b65a262b
Copter: use scaled throttle for accel-throttle's I term
...
Accel throttle's I term is taken from scaled manual throttle
2013-02-01 22:37:25 +09:00
Randy Mackay
06a71af12f
Copter: THR_MID used to scale manual throttle
2013-02-01 22:37:16 +09:00
Randy Mackay
4813526725
Copter: bug fix for autotrim's roll axis backwards
2013-01-31 17:42:29 +09:00
rmackay9
9c3b9907dd
Copter: bug fix to set sonar_alt_health to zero when disabled
2013-01-31 17:00:28 +09:00
Randy Mackay
70371be4a1
Copter: use AP_Math's longitude_scale
...
bug fix to base scaling on home location instead of next_WP which may
not have been initialised
2013-01-27 23:35:12 +09:00
Randy Mackay
6f5050a8b9
Copter: minor casting fixup for wp_distance
2013-01-27 11:27:43 +09:00
Randy Mackay
ce370bab0c
Copter: rename CUR and CURR to CURRENT for logging
...
Based on user complaint that enable/disable was using CUR while message
was appearing as CURR
2013-01-26 17:20:41 +09:00
Randy Mackay
fb1358a629
Copter: make all message output csv
2013-01-26 17:05:38 +09:00
Randy Mackay
d2767b911c
AP_Math: switch get_distance_cm to return uint32_t
...
Includes changes required on ArduCopter and ArduPlane side as well
2013-01-26 17:04:12 +09:00
Randy Mackay
0056bfadd7
Copter: rename ROLL_PITCH_LOITER
...
new name ROLL_PITCH_LOITER_INAV makes it more clear that it should only
be used with the new inertial nav loiter controllers
2013-01-25 23:27:31 +09:00
Randy Mackay
b74fe10aa9
Copter: set each flight mode's nav_mode
...
Allow ACRO flight mode's roll, pitch, yaw, throttle and nav mode to be
overwritten
2013-01-25 15:57:55 +09:00
Randy Mackay
aaecc25ac7
Copter: leonard's inav2
...
Moved loiter controller to navigation.pde
2013-01-25 15:16:35 +09:00
Randy Mackay
fd02cfe706
Copter: added set_nav_mode to control initialisation of nav controllers
...
Renamed run_navigation_controllers() to run_autopilot()
Renamed update_nav_wp() to update_nav_mode()
Renamed wp_control to nav_mode to be more consistent with roll-pitch,
yaw and throttle controllers
2013-01-25 15:16:29 +09:00
Randy Mackay
8af605cafc
Copter: set update rate to 50hz during esc calibration
...
Also modified some comments in the code re the esc calibration
2013-01-25 11:34:48 +09:00
Randy Mackay
deafbf1f56
Copter: inav loiter comment changes
...
removed unused get_loiter_vel function
2013-01-24 11:14:38 +09:00
Randy Mackay
68fc9ac1d8
Copter: add "f" to end of float constants
...
This is a small performance improvement for the px4
2013-01-23 14:51:37 +09:00
Randy Mackay
911e090e07
Copter: typo fixed for trad heli config
2013-01-23 12:35:10 +09:00
Randy Mackay
9a09f086d2
Copter: Leonard Hall's inertial nav ver 2
2013-01-23 12:34:49 +09:00
Andrew Tridgell
47cc247046
Copter: limit number of bytes read per GCS check
2013-01-23 09:34:54 +11:00
rmackay9
ab1978ad50
Copter: Leonard Hall's inertial nav based loiter
2013-01-22 18:38:00 +09:00
Jonathan Challinger
6565d83e73
InertialNav: Fixed signs, remove body-frame rotation, apply correction at 100hz.
2013-01-22 18:37:45 +09:00
Andrew Tridgell
f303554259
Copter: run serial0 at 57600 on PX4
2013-01-22 09:50:22 +11:00
Andrew Tridgell
ae5f46abc9
Copter: fixed mavlink fetch of 16 character parameter
2013-01-21 16:52:01 +11:00
Robert Lefebvre
dde713aaa5
Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this.
2013-01-20 21:32:00 +09:00
Andrew Tridgell
a341d59ed0
Copter: fixed test code warnings
2013-01-20 22:13:20 +11:00
Michael Oborne
74e3d64e62
AC Fix BATT_CURR_PIN number
2013-01-20 06:33:29 +08:00
Andrew Tridgell
580abf1106
Copter: fixed PX4 mag orientation
2013-01-17 17:23:34 +11:00
Randy Mackay
577bf865b3
Copter: update firmware version to 2.9-dev
...
The -dev extension indicates that we are post 2.9 release
2013-01-17 13:03:33 +09:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Randy Mackay
ccaa7a52ef
Copter: RTL bug fix to initial step is always a climb and not a descent
...
Also bug fix to hold yaw on take-off
2013-01-15 12:17:52 +09:00
Randy Mackay
2dab40abeb
Copter: bug fix to altitude check of verify takeoff
...
set_next_WP function was not setting the alt_change_flag properly
2013-01-15 12:17:45 +09:00
Randy Mackay
148c227d73
Copter: update firmware version to rc5
2013-01-15 12:17:41 +09:00
Randy Mackay
04677bfb95
Copter: constrain auto roll and pitch to 45 degrees
2013-01-15 12:17:32 +09:00
Andrew Tridgell
56f22f9226
Copter: use common log reading function
2013-01-15 14:03:51 +11:00
jschall
d6b3d370c3
Correct spelling of run_navigation_contollers
2013-01-14 16:45:15 -08:00
Randy Mackay
5418827f22
Copter: update parameter descriptions for FRAME and CH7_OPT
2013-01-14 15:49:26 +09:00
Randy Mackay
98f5e27dc3
Copter: small correction to RTL_ALT_FINAL param description
2013-01-14 15:21:19 +09:00
Randy Mackay
8bbc93bb04
Copter: added CH7 switch to enabling/disable the sonar in flight
...
This indirectly switches surface tracking on/off which is useful to
avoid tracking the tops of uneven objects when far above the ground
2013-01-14 14:00:08 +09:00
Randy Mackay
df2137ed72
Copter: constrain loiter so that it never commands more than 45 degrees of lean in lat or lon directions
2013-01-14 13:34:19 +09:00
Randy Mackay
fef7569dee
Copter: added experimental LOITER_REPOSITIONING #define to config.h
...
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
2013-01-14 13:34:14 +09:00
Randy Mackay
76f032160c
Copter: relax altitude check in verify_takeoff
...
Previously we checked if the alt > target_alt but because there is
little to no overshoot with the new accel based alt controller this
check was failing for some users.
2013-01-14 13:34:06 +09:00
Randy Mackay
8ac95d6034
ArduCopter: updated release notes for 2.9-rc4
2013-01-13 20:01:13 +11:00
Randy Mackay
c1fa850d10
ArduCopter: update firmware version to 2.9-rc4
2013-01-13 20:01:09 +11:00
Randy Mackay
c447b4b79b
ArduCopter: move setting of land's yaw mode to the do_land function
2013-01-13 20:01:06 +11:00
Randy Mackay
08dc730d40
ArduCopter: bug fix to LAND flight mode not actually landing if initiated from failsafe
...
An hidden bit of failsafe functionality in the set_mode function was
switching the throttle mode back to THROTTLE_AUTO instead of
THROTTLE_LAND
2013-01-13 20:01:03 +11:00
Randy Mackay
175f69a64f
ArduCopter: smooth throttle when switching from manual throttle to alt hold
...
new set_accel_throttle_I_from_pilot_throttle function copies the
difference between the pilot's throttle and hover throttle to the
accelerometer based throttle controller's I term.
2013-01-13 20:00:59 +11:00
Randy Mackay
9ad6f711f8
ArduCopter: replace FS_THR_RTL_MIN_DISTANCE with wp_radius
...
This effectively means that an RTL kicked off by a failsafe will
immediately switch to LAND mode only if within 2 meters. Previously the
radius was much wider (15m).
2013-01-13 20:00:47 +11:00
Randy Mackay
19abdc3cd3
ArduCopter: update release notes for rc3
2013-01-13 20:00:43 +11:00
Randy Mackay
12f885c33c
ArduCopter: disable ITERM logging by default
...
This message takes 1ms to write and we are running over our limits on
some loops.
2013-01-13 20:00:39 +11:00
Randy Mackay
fbed8b8861
ArduCopter: alphabetized the contributors list
...
Jonathan Challinger added
2013-01-13 20:00:28 +11:00
Randy Mackay
5965914039
ArduCopter: increase firmware version to 2.9-rc3
2013-01-13 20:00:25 +11:00
Andrew Tridgell
b0c710b67f
Copter: move read_AHRS() before run_rate_controllers()
...
this ensures the rate controllers use the latest data
2013-01-13 20:00:14 +11:00
rmackay9
f25f1cb3bf
ArduCopter: changed alt hold to use the sonar if enabled and healthy
2013-01-13 19:56:19 +11:00
rmackay9
21b6c78d12
ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes
...
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
2013-01-13 19:51:47 +11:00
Pat Hickey
164246c7d8
ArduCopter: better instructons for setup_motors cli test
...
* i just spent hours confused about this
2013-01-13 00:17:17 -08:00
Andrew Tridgell
72c8a14e76
Copter: fix trad heli log build
2013-01-13 17:57:47 +11:00
Andrew Tridgell
78fd5bb23f
Copter: get rid of remaining Log.pde warnings
2013-01-13 17:53:39 +11:00
Andrew Tridgell
36e38eeef7
Copter: ensure ahrs.init() is called
2013-01-13 17:32:48 +11:00
Andrew Tridgell
3039c37f95
Copter: use macros from common header
2013-01-13 17:31:42 +11:00
Pat Hickey
d7eeeab79e
ArduCopter: fix new style Log.pde build for PX4.
...
randy - you should please review these changes to make sure you wanted
to have the int16_t type in all of these structs, or how you want to
convert all these other integer types to int16_t if you do need it that
way.
2013-01-12 13:11:25 -08:00
Randy Mackay
87627d883b
ArduCopter: use new logging method for remaining packet types
...
Additional changes include renaming RAW dataflash type to IMU
2013-01-13 00:17:44 +09:00
Randy Mackay
177da0ca74
ArduCopter: fixed minor bug in logging of parameter changes to dataflash
...
It is questionable whether we should even bother writing these to the
dataflash as there is no way to recognise which parameter has been
affectded
2013-01-13 00:15:34 +09:00
Randy Mackay
b4bbae56c6
ArduCopter: reduce redundant event logging
...
We now only write state changes to the dataflash log when they have
changed.
Also replaced <tab> with <space> in AP_State.pde
2013-01-13 00:13:10 +09:00
Andrew Tridgell
af478d52bc
Copter: use the new logging methods for 2 packet types
...
the rest still need to be converted
2013-01-12 18:15:23 +11:00
Andrew Tridgell
0fe7901422
Copter: only print perf data when SCHED_DEBUG is non-zero
2013-01-12 12:06:40 +11:00
Andrew Tridgell
dcb181d2d8
Copter: use new AP_Scheduler library
2013-01-12 12:02:57 +11:00
Andrew Tridgell
585459ece9
Copter: tweak the serial buffer sizes
...
we only need the large buffers for HIL
2013-01-11 10:31:55 +11:00
Andrew Tridgell
2e57720444
Copter: move memcheck_init() earlier in setup
2013-01-11 10:24:21 +11:00
Andrew Tridgell
21e979910f
Copter: improved 'FRAME' docs
2013-01-10 15:44:13 +11:00
Pat Hickey
0ff6ed12b1
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
2013-01-09 13:15:38 -08:00
James Bielman
7374e5d84e
ArduCopter: Use 16-bit arithmetic when comparing event tick counters.
...
- On the ARM, once the tick counter wrapped, we stopped running events
because the wraparound case wasn't being handled correctly. Make
sure the comparison is 16 bits to prevent this.
2013-01-09 11:19:52 -08:00
James Bielman
7827a4a54a
ArduCopter: Add AP_HAL_SMACCM support.
...
- Added default configuration to "config.h".
- Added main function to run under FreeRTOS with HWF4.
2013-01-09 11:19:51 -08:00
James Bielman
ab37f833db
MS5611: Fix CONFIG_MS5611_SERIAL definitions.
...
- Make sure the values are defined as integers. We were always using
SPI rather than using I2C when desired.
2013-01-09 11:19:51 -08:00
Andrew Tridgell
e575c5eba0
Copter: read baro at 50Hz
2013-01-09 23:46:05 +11:00
Andrew Tridgell
269804e866
Copter: use barometer.accumulate()
...
this gives us more consistent timing and faster baro reads on APM1
2013-01-09 23:08:19 +11:00
Andrew Tridgell
91ad870f11
Copter: check bitmask in more logging functions
2013-01-09 23:06:40 +11:00
Andrew Tridgell
a237b6cc7b
Copter: update for new AP_Param API
2013-01-09 13:30:58 +11:00
Andrew Tridgell
860f4b2605
Copter: merge the latest 2.9 changes into master
2013-01-08 14:37:40 -08:00
Andrew Tridgell
d11dde578f
Copter: a useful bit of timing debug code
...
enable when looking at main loop timing
2013-01-07 11:07:44 +11:00
Andrew Tridgell
647b3b09b6
Copter: ensure we process deferred mavlink messages
2013-01-07 11:07:39 +11:00
Andrew Tridgell
d952ccf968
Copter: added main_loop_ready() function
...
this tells us when the main loop is ready to run. MAVLink won't send a
message if the main loop could run.
2013-01-07 11:07:34 +11:00
Andrew Tridgell
b079a96eaf
Copter: removed GPS_STATUS message
...
this message is huge, and completely pointless now that we have
num_satellites in GPS_RAW_INT
2013-01-05 20:39:31 +11:00
Andrew Tridgell
c48714be16
Copter: enabled PX4 sensors
2013-01-05 20:39:31 +11:00
James Bielman
264db3670e
AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C.
...
- Update ArduCopter and ArduPlane modules to pass the correct serial
driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
2013-01-03 13:48:06 -08:00
rmackay9
ed79e8c954
ArduCopter: correct TRIM_THROTTLE parameter comments
2013-01-03 00:39:18 +09:00
rmackay9
861a66e26e
ArduCopter: remove @brief from GCS_MAVLINK class's comments because they mess up the mission planner's parsing of parameter descriptions
2013-01-03 00:34:10 +09:00
rmackay9
ba8e9c8f9e
ArduCopter: revert path for reading gcs parameter descriptions
2013-01-02 23:51:27 +09:00
rmackay9
d56e9cc701
ArduCopter: change path for GCS_Mavlink parameter descriptions
2013-01-02 23:42:05 +09:00
rmackay9
4ef7e7b1c6
ArduCopter: add parameter descriptions for GCS_Mavlink objects
2013-01-02 23:36:48 +09:00
Andrew Tridgell
94e3322e24
Copter: fixed build on px4
2013-01-02 22:09:02 +11:00
rmackay9
886329898c
ArduCopter: minor fixup to a few parameter descriptions
2013-01-02 18:50:25 +09:00
