Michael Oborne
a71ed6c5ce
enable mavlink10 by default
2012-06-04 08:02:08 +08:00
Jason Short
15aea320cb
Added note to remove this unused param
2012-06-03 11:13:50 -07:00
Jason Short
12ab875d58
using current PWM rather than a re-read of the PWM.
2012-06-03 11:13:50 -07:00
Jason Short
9ab06c5542
Moved PID logging counter into define
2012-06-03 11:13:50 -07:00
rmackay9
72d76558a7
ArduCopter: Ensure update_GPS does nothing when gps is disabled.
...
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
2012-06-03 23:48:45 +09:00
rmackay9
fd6b21d0c7
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 17:02:35 +09:00
rmackay9
4544b37fec
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 16:59:23 +09:00
rmackay9
dcdeae412e
ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives.
...
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
2012-06-03 16:58:19 +09:00
rmackay9
2a216ce900
ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx).
2012-06-02 12:51:12 +09:00
Jason Short
c2d14a5cad
RC_Channel fix for throttle output.
...
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
2012-05-31 14:59:03 -07:00
Robert Lefebvre
5f058fb9b2
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
Robert Lefebvre
30e55533dc
Change to increase Parameter space as we have run out.
...
This will decrease the max number of waypoints from 186
to 169.
2012-05-30 20:41:53 -04:00
Jason Short
dec6f0ca62
When RTLing, force home as the final location for loiter.
2012-05-30 11:06:41 -07:00
Jason Short
bc578172a5
moved detector to run until the throttle is low, then stop running.
2012-05-30 09:44:59 -07:00
Jason Short
f0456dc947
Missed a Semicolon
2012-05-30 09:36:16 -07:00
Jason Short
302c632205
Altered the ground detector logic to no continuously run when landed
2012-05-30 09:34:31 -07:00
Jason Short
22065e3f3f
Broken timer - removed
2012-05-29 12:56:38 -07:00
Jason Short
0ce883b96a
Removed unused variable
2012-05-29 12:43:23 -07:00
Jason Short
9310d613e1
Lowered I term - causes oscillations in SIM
2012-05-29 12:43:01 -07:00
Jason Short
2311d52d37
Renamed some variables to clarify functionality.
2012-05-29 12:42:37 -07:00
Jason Short
7c6f766251
Speed up automatic disarming to 25 seconds for safety.
...
renamed AUTO_ARMING_DELAY to AUTO_DISARMING_DELAY
2012-05-29 12:41:35 -07:00
Jason Short
f491f5e9ca
Removed references to a takeoff timer
2012-05-29 11:28:40 -07:00
Jason Short
15774366ba
Failsafe: Looking for takeoff_complete now vs unreliable GPS
2012-05-29 11:25:04 -07:00
Jason Short
08bf04dd08
pulling throttle low in flight turns out to be more common than thought. Removed clearing of takeoff_complete flag. This is still cleared during disarm which is automatic after 30 seconds of no throttle.
2012-05-29 11:25:04 -07:00
Jason Short
09f4a16bfb
changed the way takeoff complete is figured. Looking for high throttle.
2012-05-29 11:25:04 -07:00
Jason Short
b8349f5486
Added note to functionality
2012-05-29 11:25:04 -07:00
Jason Short
9d92602188
changed WP radius to AP_Int16
2012-05-28 22:39:29 -07:00
Jason Short
5754f97433
reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station.
2012-05-27 09:21:20 -07:00
Jason Short
7df1aa2914
Arducopter.pde : setting rtl_approach_alt above 1 would force auto landing even if auto-landing was disabled.
2012-05-23 22:00:56 -07:00
Andrew Tridgell
d9457ecc38
MAVLink: send time of GPS fix accurately
...
when we send a GPS_RAW message, set the usec field to the time we got
the fix from the GPS, not the current time. This makes it possible for
aerial photo processing to be more accurate, as the usec field with
more accurately reflect the planes position/time pair
2012-05-23 17:33:33 +10:00
Andrew Tridgell
66544a5db2
Log: don't print '+' while erasing logs
...
we no longer do page based erase, so printing a + every 128 pages
makes no sense
2012-05-22 20:10:29 -07:00
Robert Lefebvre
4e4ff84cf1
Updates to CopterLEDS
...
Creation of Nav Blink Function.
2012-05-22 09:58:37 -04:00
Andrew Tridgell
422dc82f32
MAVLink: allow parameter fetch during mavlink_delay()
...
this allows the planner to fully connect to the APM with MAVLink while
doing a DataFlash erase
2012-05-22 16:13:35 +10:00
Jason Short
1b9f34e4e0
Flip.pde: renamed dcm to ahrs
2012-05-21 12:58:51 -07:00
Jason Short
5407acdb4c
Some bug fixes to Auto-flip. I ran this code through the sim and found these flaws.
2012-05-21 11:07:41 -07:00
Jason Short
f6d8a18182
Added note
2012-05-21 09:58:23 -07:00
Jason Short
1a5e2f4e37
Attitude.pde - Removed rate limit based on SIM flights. These should never have been in place and seriously detriment Acro flight.
2012-05-21 09:58:23 -07:00
Jason Short
8d075015e1
added check for duplicate time-stamped GPS messages.
2012-05-18 09:54:18 -07:00
Jason Short
9732b7d2dc
navigation.pde:
...
removed unneeded WP_Distance check
remove unneeded return for Navigate
removed unneeded rate_D calcs
removed unused functions
2012-05-17 11:05:05 -07:00
Jason Short
7e190c6f5c
Arducopter.pde :
...
removed unneeded d_rate_filters
updated Nav routine to handle faster GPS updates
moved calc_XY_velocity to GPS read
added check for duplicate GPS reads
2012-05-17 11:05:05 -07:00
Jason Short
d1cd04486a
removed retro loiter code since Angel has a branch now.
...
shrank speed filter to avoid latency
removed unused forward estimator code
placed code for switchover to gps.groundspeed at 1.5m/s
added clamp for D term when below .5m/s to eliminate noise
added hybrid I-term based on speed error and position
changes Loiter D term to use position rather than acceleration to avoid noise
2012-05-15 22:14:23 -07:00
Jason Short
7f3e142fa8
Loiter Gains based on new SIM
2012-05-15 22:01:01 -07:00
Robert Lefebvre
c5f7b2fff2
Fixed Syntax error.
2012-05-15 12:35:35 -04:00
Robert Lefebvre
c8fb9a6635
More CopterLEDS changes.
...
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2. Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2. Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code. Legacy users should see no difference.
2012-05-15 12:00:21 -04:00
Robert Lefebvre
a285e2779f
CopterLEDS changes for APM2
2012-05-15 10:07:03 -04:00
rmackay9
357d6c2d9b
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
rmackay9
2f74004fcb
ArduCopter: updated version to 2.5.5
2012-05-13 08:47:43 +09:00
rmackay9
af86ae8cbf
ArduCopter: fixed compile error by declaring extern print_latlon
2012-04-30 21:44:27 +09:00
Andrew Tridgell
435a64b97e
ACM: fixed HIL build
2012-04-30 22:42:17 +10:00
rmackay9
a1f5661161
ArduCopter: restored gps test in CLI
...
Added check so not enabled when using 1280. Also fixed comments in other tests to explain the check for the 1280.
2012-04-30 17:29:50 +09:00
Adam M Rivera
56d3fa1601
Parameters.pde/AP_MotorsHeli: Updated comments to leverage the new value aliases
2012-04-28 20:50:41 -05:00
Adam M Rivera
40fdba441b
Parameters.pde: Added value aliases to comments
2012-04-28 20:35:22 -05:00
Adam M Rivera
941cf6fa69
Parameters.pde: Added more parameter comments.
2012-04-28 12:14:17 -05:00
Andrew Tridgell
67afdc7485
autotest: fixes for MAVLink 1.0 in autotest
2012-04-27 15:15:53 +10:00
Adam M Rivera
239323eaa4
Parameters.pde/AP_MotorsHeli.cpp: Added comments from Roberts clone.
2012-04-26 18:26:14 -05:00
Adam M Rivera
cb6f97fc7f
Changed the marker for Group parameters to @Group.
2012-04-25 12:27:51 -05:00
Adam M Rivera
51bcc73c77
Parameters.pde: Added lib comments.
2012-04-25 11:23:46 -05:00
Adam M Rivera
9fb9231ec4
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into param-suffix
2012-04-24 14:11:54 -05:00
Adam M Rivera
29fec278eb
Parameters.pde: Updated comment schema to include the parameter name which becomes the XML node that contains the meta data.
2012-04-24 13:11:16 -05:00
Adam M Rivera
acab9b7c2c
Parameters.pde: Added new comment structure to a few parameters for testing.
2012-04-24 11:37:33 -05:00
Andrew Tridgell
4fee26437b
MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI
2012-04-24 22:24:58 +10:00
Andrew Tridgell
fe970221e2
ACM: added support for MAVLink 1.0 to ArduCopter
...
most operations should now work
2012-04-24 19:54:20 +10:00
Adam M Rivera
b2a7227ae7
ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define.
2012-04-23 00:19:18 -05:00
Adam M Rivera
60c347e23b
Parameters: Added g.retro_loiter which is configurable by the user via the MP.
2012-04-23 00:17:52 -05:00
Adam M Rivera
8e580729b7
config.h: Removed comment.
2012-04-23 00:16:41 -05:00
Adam M Rivera
97040a7b3a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-23 00:03:37 -05:00
Jason Short
9c19138fb8
Log.pde : Updated Flash Logging to log Floats properly vs scaled integers.
2012-04-21 15:25:53 -07:00
Jason Short
e22832a832
Added a union for casting floats to ints and back when storing Floats to the DataFlash
2012-04-21 15:17:09 -07:00
rmackay9
090f5aaa6f
ArduCopter - config.h - set standard RC_SPEED to 125 for helicopter frame
2012-04-21 23:46:36 +09:00
rmackay9
c993049c48
ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion
2012-04-21 23:24:57 +09:00
rmackay9
533772339e
ArduCopter - Attitude.pde - added logging of optical flow pid controller
2012-04-21 20:17:12 +09:00
rmackay9
3e95ade004
ArduCopter - changed optflow object to be APM2 version if necessary
2012-04-21 20:15:55 +09:00
rmackay9
919f004b27
ArduCopter - changed Optical Flow for APM2 to use A3 pin
2012-04-21 20:15:16 +09:00
Adam M Rivera
7d13371acf
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-20 11:45:38 -05:00
rmackay9
f0a9209935
ArduCopter - regressed version back to 2.5.4
2012-04-20 21:58:32 +09:00
James Goppert
5390467f3d
Worked on ArduCopter cmake options.
2012-04-19 16:05:08 -04:00
Adam M Rivera
c233defbe6
Merge branch 'retro-loiter' of https://code.google.com/r/a432511-wip into auto-approach
...
Conflicts:
Tools/ArdupilotMegaPlanner/Common.cs
2012-04-19 11:08:34 -05:00
Adam M Rivera
1676e09f12
navigation.pde: Put the new calc_GPS_velocity method in a compiler if that checks the new RETRO_LOITER_MODE config value (saves space and ensures its not being used unless retro loiter mode is enabled)
2012-04-19 10:21:04 -05:00
Adam M Rivera
24363ccb83
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into retro-loiter
2012-04-19 10:17:36 -05:00
Adam M Rivera
d29f1ef331
Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff.
2012-04-19 10:16:29 -05:00
Adam M Rivera
a7bc3d2cc6
Arducopter.pde: Moved gps to 10hz. Changed calc_XY_velocity to calc_GPS_velocity.
2012-04-18 23:07:35 -05:00
Adam M Rivera
d4a4641ae6
navigation.pde: Added calc_GPS_velocity. Added constraint to x/y error and x/y rate error.
2012-04-18 23:06:15 -05:00
James Goppert
53c143a575
Improved cmake options.
2012-04-18 23:15:29 -04:00
James Goppert
0e7e77760a
Updated ArduPlane/ArduCopter cmake options.
2012-04-18 15:16:02 -04:00
Adam M Rivera
a3842734a9
Planner/defines.h: Updated the enumeration value for APPROACH so as not to disturb the order of the universe.
2012-04-18 10:32:01 -05:00
James Goppert
a9f0bd24d7
Switched to project specific cmake lists.
...
This is better since each project has very different options.
2012-04-17 23:07:20 -04:00
Adam M Rivera
f6d81a16c2
ArduCopter: Added code to prevent mode from switching to APPROACH on every loiter.
2012-04-16 16:29:54 -05:00
Adam M Rivera
56a00fa1f7
ArduCopter: Changed millis compare to use new config value for approach delay.
2012-04-16 14:04:30 -05:00
Adam M Rivera
07e53fad18
commands_logic.pde: Added write to constrained value to EEPROM.
2012-04-16 14:03:33 -05:00
Adam M Rivera
7b277d7044
config.h: Added RTL_APPROACH_DELAY config value.
2012-04-16 14:00:08 -05:00
Adam M Rivera
f9affb3295
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
...
Conflicts:
ArduCopter/Parameters.h
2012-04-16 10:23:01 -05:00
Adam M Rivera
0c3d6614cd
system.pde: Updated param name to loiter_timer.
2012-04-16 10:12:30 -05:00
Adam M Rivera
3d024ba2dd
commands_logic: Allowed for an approach alt as low as 1m. Added a check to make sure we are currently above our target approach alt.
2012-04-16 10:11:50 -05:00
Adam M Rivera
41702aca94
ArduCopter: Updated param name from auto_land_timer to loiter_timer, because it could really be used for more routines like auto-approach. Added timer before approach (20s).
2012-04-16 10:07:57 -05:00
Adam M Rivera
a366bb2f81
Parameters: Changed rtl_approach_alt to float to support more granular altitudes
2012-04-16 10:06:29 -05:00
rmackay9
870b5e5f75
ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM
2012-04-16 23:47:57 +09:00
Andrew Tridgell
95cb35c7bb
AHRS: enable AHRS_ group in ArduCopter
2012-04-16 20:55:14 +10:00
Adam M Rivera
77d6f22864
ArduCopter, commands_logic: Updated logic to allow as low as 5m.
2012-04-15 19:50:05 -05:00
Adam M Rivera
2954bf6f76
ArduCopter: Added check to make sure user defined approach alt is at least 5.
2012-04-15 16:58:22 -05:00
Adam M Rivera
cddcdb8be3
commands_logic: Added check to make sure the do_approach method is not being used to land.
2012-04-15 16:57:49 -05:00
Adam M Rivera
a2b338c052
System: Added handler for the new APPROACH flight mode which will initiate an approach to a target alt as defined by the user.
2012-04-15 16:55:34 -05:00
Adam M Rivera
a24b7bcf14
ArduCopter: Added check to g.rtl_approach_alt, which if greater than zero will initiate an approach to the target alt rather than land.
2012-04-15 16:54:43 -05:00
Adam M Rivera
cfe3b58248
commands_logic: Added do_approach() to set the new target alt based on the user defined value.
2012-04-15 16:53:25 -05:00
Adam M Rivera
83fe6733d4
Defines: Added new control mode (APPROACH).
2012-04-15 16:52:32 -05:00
Adam M Rivera
7ba8c291bd
Parameters: Added new APPROACH_ALT params (g.rtl_approach_alt) which stored the users desired target altitude after RTL is complete.
2012-04-15 16:51:41 -05:00
rmackay9
a71ed6abec
ArduCopter - updated firmware version to "2.6 Beta"
2012-04-14 14:26:44 +09:00
rmackay9
24b81db20e
ArduCopter - LEDS - main code to support COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:44 +09:00
rmackay9
c337df11c8
ArduCopter - LEDS - set new output pins to OUTPUT to support COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:40 +09:00
rmackay9
d70f5da5e0
ArduCopter - LEDS - define pins to be used for COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:36 +09:00
rmackay9
84b07b5e6a
ArduCopter - LEDS - added new COPTER_LEDS definition
...
Code by Robert Lefebvre
2012-04-12 22:55:32 +09:00
rmackay9
0a3bc9a66a
ArduCopter - LEDS - two new parameters to support COPTER_LEDS.
...
Code by Robert Lefebvre.
2012-04-12 22:55:28 +09:00
rmackay9
fad162989f
ArduCopter - navigation.pde - added logging of Loiter PID controllers
2012-04-11 23:52:25 +09:00
rmackay9
f8210b164c
ArduCopter - Parameters.h - changed initialisation order to remove compiler warning (have not changed enum values so shouldn't require eeprom format id update)
2012-04-09 17:37:06 +09:00
rmackay9
df85051574
ArduCopter - added dataflash logging of roll and pitch rate controllers
2012-04-08 10:19:20 +09:00
rmackay9
998058ec07
ArduCopter - removed unused motor pde files including heli.pde, motors_hexa.pde, motors_octa.pde, motors_octa_quad.pde, motors_tri.pde and motors_y6.pde
2012-04-04 23:06:12 +09:00
rmackay9
ad9a8acbab
ArduCopter - test.pde - changed references "motor_armed" to "motors.armed()" as part of move to AP_Motors library.
...
Change to ESC initialisation calls to use motors.throttle_pass_through method of AP_Motors class.
2012-04-04 23:05:26 +09:00
rmackay9
1d086c83f0
ArduCopter - system.pde - changed references to "motor_armed" to "motors.armed()" as part of the move to use AP_Motors library.
2012-04-04 23:03:21 +09:00
rmackay9
4aa40bdf10
ArduCopter - setup.pde - changed cli for helicopter to call the new AP_Motors class's parameters instead of the global parameters.
...
changed init_esc to call the AP_Motor's class's "throttle_pass_through" function.
2012-04-04 23:02:29 +09:00
rmackay9
473126581d
ArduCopter - radio.pde - changed motor initialisation to set update rate, frame orientation, min and max throttle to AP_Motors class.
...
Note: perhaps the motors speed at least should be moved to a parameter within the motors class.
output_min function greatly simplified as this is handled by the AP_Motors class.
2012-04-04 23:00:56 +09:00
rmackay9
905a445391
ArduCopter - motors.pde - changed references to "motor_armed" to "motors.armed()" because we've moved to using the AP_Motors class.
...
Simplified set_servos_4 function which was responsible for calling "output_motors_armed" or "output_motors_disarmed" as this determination as to whether the motors are armed or not is handled within the AP_Motors class.
2012-04-04 22:58:42 +09:00
rmackay9
aa54458dcf
ArduCopter - leds.pde - changed refrences to "motor_armed" to "motors.armed()"
2012-04-04 22:57:50 +09:00
rmackay9
7df17e9b3b
ArduCopter - removed references to MOT_1 etc as these are now within the AP_Motors class (i.e. MOT_1 has become AP_MOTORS_MOT_1)
2012-04-04 22:56:07 +09:00
rmackay9
ee308ea06c
ArduCopter - increased firmware version to 118. Removed nearly all heli parameters as these are all created by the AP_MotorHeli class now.
...
Note: we cannot move the heli_servos to the AP_MotorHeli class yet because of a small issue in the parameters class.
2012-04-04 22:55:07 +09:00
rmackay9
8402a3d837
ArduCopter - Log.pde - changed MOT output to dataflash to take values from AP_Motors class's motor_out array instead of the global motor_out array.
2012-04-04 22:53:21 +09:00
rmackay9
e5710958bc
ArduCopter - GCS_Mavlink.pde - changed output to ground station to use new AP_Motor's class motors array inplace of the global "motor_out" array.
2012-04-04 22:52:26 +09:00
rmackay9
aa4085183c
ArduCopter - Attitude.pde - moved heli_get_angle_boost from heli.pde (which will be removed) to Attitude.pde. In fact we should combine heli_get_angle_boost and the regular get_angle_boost.
2012-04-04 22:51:39 +09:00
rmackay9
54a0709759
ArduCopter - add includes for new AP_Motors classes.
...
Remove global motor_filtered and motor_out arrays.
Removed all global heli variables.
replace "motor_armed" with "motors.armed()"
removed output to rc_4 for tri because this is now handled by AP_MotorsTri class
2012-04-04 22:50:43 +09:00
Andrew Tridgell
c0a54762c6
MAVLink: port the new adaptive flow control to ArduCopter
...
This allows for arbitrary stream rates, and supports flow control if
you are using a 3DR radio
2012-04-02 11:18:53 +10:00
rmackay9
75d7308fb4
ArduCopter - CH6 tuning - changed Roll/Pitch Rate D tuning to use the user supplied tuning range instead of the range / 100.
...
also changed heli_ext_gyro_gain to make it use the tuning range directly.
2012-03-31 09:28:25 +09:00
Andrew Tridgell
e0bb7e2777
MAVLink: don't waste 100 bytes of bandwidth sending 1 byte of information
...
the GPS_STATUS message is a massive waste of bandwidth, but it is the
only message that tells us the number of visible satellites. So only
send it if that information changes.
This makes MAVLink work better at low baud rates
2012-03-30 17:46:20 +11:00
Andrew Tridgell
7634f541b9
ACM: use set_blocking_writes(false) when we arm motors
2012-03-30 17:46:20 +11:00
Andrew Tridgell
b4107d35e8
MAVLink: raise the serial transmit buffer size to 256 bytes
...
the 128 byte serial transmit buffer was causing significant problems
with queueing of mavlink messages. With 256 bytes we can fit a lot
more messages out in each pass of the code, which makes telemetry more
efficient
As we discussed on the dev call, we now have enough free ram for this
to be worthwhile
2012-03-30 17:46:20 +11:00
Andrew Tridgell
0bc604f030
ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE
...
we now have the EEPROM option COMPASS_AUTODEC instead
2012-03-30 14:25:27 +11:00
Adam M Rivera
51b70e4d36
ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM.
2012-03-30 14:25:06 +11:00
rmackay9
0efb0e5b4d
ArduCopter - added CH6_STABILIZE_KD tuning value
2012-03-29 21:09:41 +09:00
rmackay9
599cea21bb
Added multiple new tuning parameters to the inflight channel 6 tuning feature:
...
#define CH6_YAW_KI 24
#define CH6_ACRO_KP 25
#define CH6_YAW_RATE_KD 26
#define CH6_LOITER_KI 27
#define CH6_LOITER_RATE_KI 28
2012-03-28 23:58:58 +09:00
Andrew Tridgell
34506b170f
Mavlink: fixed warnings about limits on int32 values
2012-03-27 15:37:25 +11:00
Andrew Tridgell
e0c9ab5a29
ACM: fixed heli build
2012-03-27 15:37:25 +11:00
Andrew Tridgell
47f9dfd125
ACM: fixed the build on the 1280
2012-03-27 15:37:24 +11:00
Andrew Tridgell
e956e21e7d
ACM: enable the new compass offset nulling in ACM
2012-03-27 15:37:24 +11:00
rmackay9
1f4cfb9333
ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers.
2012-03-25 16:09:08 +09:00
rmackay9
67cf7b9eed
ArduCopter - updated firmware version to 2.5.3
2012-03-25 09:13:51 +09:00
rmackay9
63b96c0153
ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter
2012-03-23 23:48:24 +09:00
rmackay9
89576a281a
ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area
2012-03-23 23:12:49 +09:00
Robert Lefebvre
84d8414a2e
Fix Auto_Trim to allow it to actually be called when setup on Ch7 pulldown menu in MP.
2012-03-23 09:17:58 -04:00
Jason Short
e2560c5865
Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator
2012-03-22 10:01:24 -07:00
rmackay9
ad4a2aa9f3
ArduCopter - motors_quad.pde - corrected test sequence for + configuration
2012-03-21 22:04:50 +09:00
rmackay9
66c4f752e3
ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint
2012-03-20 17:11:22 +09:00
rmackay9
1dd554c333
ArduCopter - updated version to 2.5.1
2012-03-20 17:08:18 +09:00
rmackay9
0773a25b5d
ArduCopter - increased default THROTTLE_CRUISE to 450
2012-03-20 16:34:07 +09:00