Commit Graph

3067 Commits

Author SHA1 Message Date
Randy Mackay 176a450ad2 Copter: remove spline handling from regular wp_nav 2014-03-28 09:23:41 +09:00
Randy Mackay d541fefab4 Copter: add do_spline_wp and verify_spline_wp functions 2014-03-28 09:23:33 +09:00
Randy Mackay 8f946a3a8c Copter: remove original_wp_bearing
To-Do: extend wpnav yaw control to only repoint nose towards waypoint if
it is more than 5m or 10m away
2014-03-28 09:23:21 +09:00
Randy Mackay 392162747a Copter; integrate WPNAV's get_yaw 2014-03-28 09:23:17 +09:00
Randy Mackay 3753550a72 Copter: integrate get_spline_yaw 2014-03-28 09:23:11 +09:00
Randy Mackay c0f12911ec Copter: minor format change 2014-03-28 09:23:02 +09:00
Randy Mackay 0822adfb34 Copter: integrate spline navigation 2014-03-28 09:22:59 +09:00
Andrew Tridgell 78ba1a33aa Copter: support 18 input channels in MAVLink 2014-03-25 14:47:43 +11:00
Andrew Tridgell c0767eebff Copter: support 14 RC channels on PX4 2014-03-25 14:47:05 +11:00
Andrew Tridgell e1b9135946 Copter: updates for new RCInput API 2014-03-25 14:47:04 +11:00
Andrew Tridgell 3362e42478 Copter: consider health of primary compass in SYS_STATUS, pre-arm and compassmot
this should prevent users from taking off with only secondary compass
2014-03-24 19:52:08 +11:00
Andrew Tridgell 11e5b95878 Copter: updates for GPS changes 2014-03-24 12:04:46 +11:00
Randy Mackay 71f61c9bef Copter: fix typo to show ATUN FMT in dataflash logs 2014-03-21 15:44:06 +09:00
Andrew Tridgell 4a01315fc5 Copter: enable logging of RADIO_STATUS 2014-03-20 09:56:37 +11:00
Andrew Tridgell a345a9d993 Copter: removed check on target component in arm
Thanks to DonLakeFlyer for finding this, see
https://github.com/diydrones/ardupilot/pull/909
2014-03-20 09:06:28 +11:00
Randy Mackay 88527cd01c Copter: integrate Mission cmd field changes 2014-03-19 12:14:25 +09:00
Andrew Tridgell e4b3323455 Copter: use common deferred message handling 2014-03-19 12:14:20 +09:00
Andrew Tridgell 69252868a8 Copter: use common MISSION_ITEM handling 2014-03-19 12:14:12 +09:00
Andrew Tridgell f4ed2beacd Copter: use new common MAVLink message handlers 2014-03-19 12:13:40 +09:00
Randy Mackay 6ef2b55602 Copter: use common GCS_MAVLink handle_mission methods 2014-03-19 12:13:22 +09:00
Andrew Tridgell 85725de9cb Copter: use new handle_mission_request()
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:13:15 +09:00
Randy Mackay a3573f9ebd Copter: minor typo in do_change_speed processing
It is unlikely that the "f" at the end of the 100 is required to
maintain the full precision of the target speed but added just in case
2014-03-19 12:12:55 +09:00
Randy Mackay 08b78db43c Copter: use mission command specific structures 2014-03-19 12:12:54 +09:00
Randy Mackay 2f8daf2fa9 Copter: integrate dataflash Log_Write_MavCmd 2014-03-19 12:12:46 +09:00
Randy Mackay edab06a3ff Copter: truncate mission before uploading new mission
replacing clear with truncate allows new missions to be uploaded while
the current mission is running
2014-03-19 12:12:36 +09:00
Randy Mackay f3813593b7 Copter: use Dataflash lib's Log_Write_Cmd 2014-03-19 12:12:11 +09:00
Randy Mackay 7b6906ae3f Copter: integrate variable max num commands 2014-03-19 12:12:01 +09:00
Randy Mackay b587d0d597 Copter: pass eeprom start to Mission constructor 2014-03-19 12:11:56 +09:00
Randy Mackay b718b9070a Copter: call mission.init during startup 2014-03-19 12:11:47 +09:00
Randy Mackay cc7b1c4e9c Copter: init_home checks cmd read success before logging 2014-03-19 12:11:39 +09:00
Randy Mackay fa96e9355b Copter: init cmd before saving with Ch7/Ch8 2014-03-19 12:11:21 +09:00
Randy Mackay 0fc36fd244 Copter: CMD dataflash logs use uint16 for total and num 2014-03-19 12:11:15 +09:00
Randy Mackay 6bb05750e7 Copter: remove alt_in_cm from mavlink to cmd conversion 2014-03-19 12:11:04 +09:00
Randy Mackay 04166c1686 Copter: replace memset in GCS_Mavlink 2014-03-19 12:10:52 +09:00
Randy Mackay c3162f67e8 Copter: integrate move of p1 from Location to mission cmd 2014-03-19 12:10:48 +09:00
Randy Mackay aade894014 Copter: integrate replace_cmd 2014-03-19 12:10:43 +09:00
Randy Mackay 54c99d84ea Copter: integrate AP_Mission set_current_cmd 2014-03-19 12:10:39 +09:00
Randy Mackay 36af34bf8b Copter: send current wp as 65535 to GCS when mission complete 2014-03-19 12:10:34 +09:00
Randy Mackay 92738533fe Copter: auto starts only when num cmds > 1
num_commands will be 1 when there is no mission because home counts as
the first command
2014-03-19 12:10:30 +09:00
Randy Mackay f77b2af661 Copter: use common location options masks 2014-03-19 12:10:26 +09:00
Randy Mackay 070cbc9250 Copter: use Mission mav to cmd conversion methods 2014-03-19 12:10:24 +09:00
Randy Mackay 67a4b47f6b Copter: pass ahrs into mission constructor 2014-03-19 12:10:15 +09:00
Randy Mackay 37fe229ded Copter: remove unused definitions 2014-03-19 12:10:12 +09:00
Randy Mackay 359f1a27ec Copter: process cmds from mission lib 2014-03-19 12:10:11 +09:00
Randy Mackay 6e0e672fb2 Copter: log using mission commands 2014-03-19 12:10:09 +09:00
Randy Mackay 43c7310540 Copter: ch7 save wp feature to use ap_mission 2014-03-19 12:10:08 +09:00
Randy Mackay ffc418dfe3 Copter: add mavlink packet to cmd conversion to GCS_Mavlink.pde 2014-03-19 12:10:06 +09:00
Randy Mackay 9f03e21f81 Copter: remove low-level handling of mission cmds
Now handled by AP_Mission
2014-03-19 12:10:04 +09:00
Randy Mackay 5d568502a0 Copter: instantiate AP_Mission object 2014-03-19 12:10:03 +09:00
Randy Mackay 1bad6a4b15 Copter: add AP_Mission object parameter
Remove global command_total and command_index parameters
2014-03-19 12:10:01 +09:00
Randy Mackay 0d23c3b910 Copter: initialise vertical speed for Loiter mode 2014-03-17 10:17:57 +09:00
Holger Steinhaus 39df609235 Copter: fixed vertical speed init for ALT_HOLD mode 2014-03-17 10:12:35 +09:00
Andrew Tridgell 43d009e3a5 Copter: set 2nd GPS as secondary 2014-03-08 21:48:18 +11:00
Randy Mackay 9287e28307 Copter: bug fix display of PerfMon log's num long loops 2014-03-08 15:17:03 +09:00
Randy Mackay 54e131cf1f Copter: re-enable CLI for Pixhawk 2014-03-08 15:17:02 +09:00
Randy Mackay 6efc26d3a6 Copter: restore mount's mode to default after ROI completes 2014-03-05 16:02:14 +09:00
Randy Mackay 7992a1a7d3 Copter: disable the CLI by default
This is unfortunate but master's flash size is over the APM2 limit
2014-03-05 12:03:56 +09:00
Randy Mackay 4f963e7795 Copter: move report_compass out of the CLI
This function is also used by compassmot.  Having it strictly part of
the CLI causes a compile error when the CLI is disabled
2014-03-05 12:01:45 +09:00
Randy Mackay 00f9843e40 Copter: remove CLI tests for gps, logging, radio
Required to shrink the firmware down so that it can fit on the APM2
boards
2014-03-05 11:44:09 +09:00
Randy Mackay fc85228d09 Copter: remove CLI set
Frees about 1k of flash
2014-03-04 22:23:57 +09:00
Randy Mackay 3a934357e9 Copter: remove unused reset_land_detector 2014-03-04 22:23:55 +09:00
Randy Mackay c56f521897 Copter: ch6 tuning of RC_FEEL_RP 2014-03-04 22:23:53 +09:00
Randy Mackay e89600afe3 Copter: integrate smoothing gain into flight modes 2014-03-04 22:23:52 +09:00
Randy Mackay 3910ab807f Copter: replace input filtering with smoothing gain 2014-03-04 22:23:50 +09:00
Randy Mackay 429e8d5e50 Copter: integrate AttControl feel param 2014-03-04 22:23:49 +09:00
lthall a9db399f60 Copter: integrate AttControl input shaping 2014-03-04 21:52:20 +09:00
Andrew Tridgell 86fa82f767 Copter: only send GPS2_RAW when we have a 2nd GPS 2014-03-03 07:05:47 +11:00
Andrew Tridgell 3de574e5dc Copter: disable GPS2 in HIL 2014-02-27 08:16:20 +11:00
Andrew Tridgell 37394b30ee Copter: added support for 2nd GPS 2014-02-26 09:40:29 +11:00
Andrew Tridgell 2fcbdc4056 Copter: pass fix type to gps->setHIL() 2014-02-25 21:11:10 +11:00
Andrew Tridgell ffcc77a21f Copter: fix for HIL API change 2014-02-23 08:18:20 +11:00
Randy Mackay d992483bf5 Copter: add EKF params to full param list 2014-02-21 13:51:22 +09:00
Randy Mackay 797212c7ab Copter: remove remnant of cli compassmot 2014-02-19 16:04:10 +11:00
Randy Mackay 2457dbf0cd Copter: more checks before starting compassmot
additional checks that copter is landed and that compassmot calibration
isn't already being performed.
Returns ACK to ground station as process begins
2014-02-19 16:04:03 +11:00
Andrew Tridgell 76b60a1a52 Copter: added compassmot over MAVLink
use the MAVLink interact code to allow for compassmot over MAVLink

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-02-19 16:04:00 +11:00
Andrew Tridgell a45d77f893 Copter: set the ahrs.set_armed() flag 2014-02-19 10:53:44 +11:00
Andrew Tridgell 0cbe64bc5e Copter: use Log_Write_Baro()
this gives the raw pressure and temperature, which is useful for
analysis, plus allows for more accurate log replay
2014-02-19 09:22:45 +11:00
Randy Mackay fdae812814 Copter: DO_SET_ROI persists across waypoints
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay bf68edd01c Copter: bug fix to 50hz logging rate
Caught by Emile Castelnuovo
2014-02-17 22:25:02 +09:00
Randy Mackay d9b7559379 Copter: remove duplicate #define from APM_Config.h 2014-02-17 16:44:47 +09:00
Randy Mackay 4e1c51aa65 Copter: bug to disarm at end of mission 2014-02-17 16:43:49 +09:00
Andrew Tridgell ce66314f40 Copter: fixed HIL build on PX4 2014-02-17 12:34:34 +11:00
proficnc bbf5c11c8a Update Parameters.pde
Moved Disabled to the bottom of the drop-down box for selecting logging types.
This is to reduce the potential for someone to accidentally select Disabled when they intend on selecting Default.
2014-02-17 10:02:45 +11:00
Randy Mackay 00913ffe1b Copter: throttle rate to simple P controller
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay 9444ba7ea8 TradHeli: init roll/pitch input filter 2014-02-16 13:35:33 +11:00
Randy Mackay b259510095 Copter: init roll/pitch input filters 2014-02-16 13:35:30 +11:00
Andrew Tridgell 9c66dd0d2c Copter: change to Compass::learn_offsets 2014-02-16 13:22:13 +11:00
Randy Mackay aab9b30bf6 Copter: replace APM_PI with AC_P
Saves about 90bytes of RAM
2014-02-15 06:09:08 +11:00
Randy Mackay 3f10a84a2a Copter: remove accel calibration from cli
Also remove compass, flight mode, optical flow, radio and ch6 tuning
knob setup from cli to free up 3.5k of flash
2014-02-15 06:09:08 +11:00
Randy Mackay 3ccd1ad170 Copter: integrate AttControl method name changes 2014-02-15 06:09:08 +11:00
Randy Mackay 6880a6db80 TradHeli: integrate AttControl method name changes 2014-02-15 06:09:08 +11:00
lthall 7ed5080dc9 Copter: simplify get_angle_targets_for_reporting 2014-02-15 06:09:08 +11:00
lthall 41dcfae7c0 AC Acro and Sport: Angle limit code update 2014-02-15 06:09:08 +11:00
Andrew Tridgell ebf6d47830 Copter: disable direct tuning, we need accessors for this 2014-02-15 05:48:24 +11:00
Andrew Tridgell 2fbdf7f718 Copter: fixed build for AHRS API changes 2014-02-15 05:48:22 +11:00
Andrew Tridgell a8dc1be4de Copter: fixed non-EKF copter build 2014-02-15 05:48:21 +11:00
Randy Mackay 20989fd5e9 Copter: allow ch6 tuning of EKF 2014-02-15 05:48:20 +11:00
Andrew Tridgell 86afd13f12 Copter: use GPS AIRBORNE_4G 2014-02-15 05:48:17 +11:00
Andrew Tridgell a112694a50 Copter: added AUX switch option for enable/disable EKF 2014-02-15 05:48:17 +11:00
Andrew Tridgell 5606e2f4a7 Copter: enabled EKF and SIMSTATE flash logging 2014-02-15 05:48:16 +11:00