Commit Graph

69 Commits

Author SHA1 Message Date
Andrew Tridgell 68146d541c HAL_ChibiOS: removed boilerplate lines from bootloaders 2021-10-26 15:56:53 +11:00
Peter Barker 70aef84997 AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT
No longer used
2021-08-20 10:51:19 +10:00
Andrew Tridgell bbcce717dc HAL_ChibiOS: stop defaulting relay pins to 54 and 55
this just leads to confusion
2021-07-22 07:48:12 +10:00
Andrew Tridgell 91dce554d1 HAL_ChibiOS: removed unnecessary USB product IDs from boards 2021-05-27 09:30:30 +09:00
Andrew Tridgell 571fbf8f71 HAL_ChibiOS: update power VALID pins 2020-06-04 09:51:27 +10:00
Andrew Tridgell a5965d5a9e HAL_Chibios: removed unnecessary debug defines 2020-04-29 07:36:55 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat
use default
2020-04-28 10:32:23 +10:00
Andrew Tridgell 5a4b648cf5 HAL_ChibiOS: disable flash fallback for boards with FRAM
this saves on flash and prevents confusing results when fram fails
2020-03-14 13:47:25 +11:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Andrew Tridgell 6139860a64 HAL_ChibiOS: use default USB IDs for fmuv3 2020-02-22 12:17:05 +11:00
Andrew Tridgell 06a9baeb9b HAL_ChibiOS: adjust fmuv3 SPI priority
fixes an issue with SPI4 assignment
2020-01-02 09:52:57 +11:00
Andrew Tridgell d422825715 HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT
not needed any more
2019-12-18 17:18:44 +11:00
Andrew Tridgell 6c0c09e690 Revert "HAL_ChibiOS: lower speed of mpu9250"
This reverts commit a4e51f3942.

This commit led to more errors on the first IMU on a normal
CubeBlack. I don't yet know why this happens, but I'm removing this in
master for now as it affects primary IMU
2019-11-01 11:20:32 +11:00
Andrew Tridgell a4e51f3942 HAL_ChibiOS: lower speed of mpu9250
it isn't handling the full speed well, getting some SPI transfer
errors
2019-10-28 21:06:41 +11:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell 51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
2019-06-09 16:56:14 +10:00
Andrew Tridgell 6333494d99 HAL_ChibiOS: disable peripheral power on boot on fmuv3
then enable after 100ms, and let settle for 20ms. This is to fix an
issue with peripheral power on consistency with all fmuv3 boards

Thanks to Philip for the suggestion
2019-05-11 18:45:18 +10:00
Andrew Tridgell 2b0a30a2c5 HAL_ChibiOS: ensure we don't overflow bootloader area
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
2019-05-06 12:36:41 +10:00
Andrew Tridgell 59652ad147 HAL_ChibiOS: added more IMU devices for Hex Cube boards 2019-03-11 12:40:21 +11:00
Michael du Breuil 3aee083540 AP_HAL_ChibiOS: Fix FMUv2 LED lighting up 2019-01-11 17:45:43 +11:00
Mark Whitehorn 86b7adf68f AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up 2018-08-03 13:08:37 +10:00
Lucas De Marchi 20778f73f1 AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly 2018-08-02 13:15:02 -07:00
Andrew Tridgell 721f5d86b1 HAL_ChibiOS: fixed mRoX21 IMU setup 2018-07-12 12:33:32 +10:00
Randy Mackay af6c5ebda1 AP_HAL_ChibiOS: reduce default BRD_PWM_COUNT to 4 for fmv3
also default relay pins to use aux out 5 and 6
2018-07-10 05:30:05 +10:00
Andrew Tridgell ca3beb88b7 HAL_ChibiOS: allow for telem1 and telem2 for bootloader on fmuv3 2018-06-29 08:17:38 +10:00
Andrew Tridgell 54dc67e2a9 HAL_ChibiOS: default bootloader product string to XX-BL 2018-06-28 11:35:13 +10:00
Andrew Tridgell 277836ccc7 HAL_ChibiOS: added bootloader definition for fmuv3
including UART support on 2 UARTs
2018-06-25 21:22:31 +10:00
Andrew Tridgell d1caa86e12 HAL_ChibiOS: adjust DMA priorities for fmuv3 2018-06-06 07:15:41 +10:00
Michael du Breuil 3a62bca7d0 AP_HAL_ChibiOS: Make redefined pins an error, fix FMUv3 2018-05-25 09:57:18 +10:00
Andrew Tridgell 3749480dd8 HAL_ChibiOS: create ap_romfs_embedded.h
use ROMFS keywork for romfs files
2018-04-17 08:44:44 +10:00
Andrew Tridgell b4aeffbaed HAL_ChibiOS: added power status flags reporting 2018-04-09 15:32:04 +10:00
Andrew Tridgell 9b22e0b7cc HAL_ChibiOS: fixed SPI rates on fmuv3
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
2018-04-07 09:10:29 +10:00
Andrew Tridgell 67bae2669b HAL_ChibiOS: enable serial5 on fmuv3 2018-04-07 09:10:29 +10:00
Andrew Tridgell 93111dc0b1 HAL_ChibiOS: ensure that IO UART gets DMA 2018-04-07 09:10:29 +10:00
Andrew Tridgell 961a97a8c9 HAL_ChibiOS: expand docs on STDOUT_SERIAL 2018-03-02 21:46:23 +11:00
Andrew Tridgell 0cd6c9e5fb HAL_ChibiOS: added commented block on enable debug for builds 2018-03-02 21:39:38 +11:00
Andrew Tridgell 74ed19f460 HAL_ChibiOS: moved more board setup into hwdef.dat 2018-03-02 12:52:50 +11:00
Andrew Tridgell ebbd15ea17 HAL_ChibiOS: auto-enable CAN when pins are defined 2018-03-02 12:52:50 +11:00
Andrew Tridgell 11cfa5fd01 HAL_ChibiOS: correct LSM9DS0 bus IDs to match HAL_PX4 2018-02-19 15:49:32 +11:00
Andrew Tridgell 4d0c3b6581 HAL_ChibiOS: added pixartPC15 SPI device for SPI01 2018-02-14 18:27:00 +11:00
Andrew Tridgell 427e00dd41 HAL_ChibiOS: switched to system timer for AP_HAL::micros()
this uses the ChibiOS system timer instead of a separate GPT timer for
the core ChibiOS timer. The advantage is it saves us a timer, plus it
changes ChibiOS to use a 1MHz clock on its timer, which gives us
higher resolution for delays.

This has a remarkable effect on timing jitter, reducing it greatly
2018-02-14 18:27:00 +11:00
Andrew Tridgell f357eec78b HAL_ChibiOS: added more comments in hwdef.dat 2018-02-14 18:27:00 +11:00
Andrew Tridgell 9a95737d7d HAL_ChibiOS: added lots of comments to FMUv3 hwdef.dat
this should help for developers of new boards
2018-02-14 18:27:00 +11:00
Mark Whitehorn 6baad37e47 AP_HAL_ChibiOS: add ICM208060-am to SPI device table in fmuv3/hwdef.dat 2018-02-11 14:55:23 +11:00
Mark Whitehorn 3a40ba1d3e AP_HAL_ChibiOS: add buzzer support to hwdef.dat for fmuv3 2018-02-11 14:55:23 +11:00
Andrew Tridgell aae1cc22f4 HAL_ChibiOS: updated USB device strings
use defaults or add in serial number
2018-02-07 20:33:45 +11:00
Andrew Tridgell fa96e23552 HAL_ChibiOS: setup correct volt and current pins
use hwdef.dat to specify battery pins
2018-02-07 20:33:45 +11:00
Siddharth Purohit 6f21c1583f HAL_ChibiOS: add definitions to support uavcan in fmuv3 2018-02-07 20:33:45 +11:00
Andrew Tridgell a5bafb399f HAL_ChibiOS: adjust SPI pin speeds 2018-02-07 20:33:45 +11:00