Commit Graph

5761 Commits

Author SHA1 Message Date
Peter Barker d60fa86026 autotest: use set_map_from_rc more 2021-02-13 19:34:52 +11:00
Peter Barker a5706a18af autotest: handle Py2 not having ConnectionResetError built in 2021-02-12 18:24:18 +11:00
Michael du Breuil 50d80e9dc4 AP_Periph: Remove debug printf 2021-02-12 14:51:09 +11:00
Willian Galvani e5844b7753 Frame_params: Sub: make RNGFND1_TYPE 0 (None)
This was causing issues in QGC 4.1 as it was showing an unhealthy
Rangefinder and marking the vehicle as "not ready to fly".
It will be up to the companion computer to set this to 10(Mavlink)
2021-02-11 10:43:50 -08:00
Peter Barker 5e3caefc2d Vagrant: make ptrace permissive to allow stack dumping 2021-02-11 17:22:48 +11:00
Peter Barker 4020308d40 Vagrant: add desktop to Vagrant 2021-02-11 09:58:53 +11:00
Iampete1 904b493809 Tools: autotest, common.py remove extra comma 2021-02-11 09:20:15 +11:00
Pierre Kancir 8396388af9 Tools: run_examples: add FlashTest to skip list 2021-02-10 18:49:42 +11:00
Peter Barker 4324d66c13 autotest: loosen time constraint on mavlink messages in magcal
Saw an error where we didn't get one of these in 5 seconds.

That sounds like too much.  But we'll loosen the constrain anyway
2021-02-10 09:28:45 +11:00
Peter Barker bd8384b322 autotest: break out a get_altitude method 2021-02-10 09:28:25 +11:00
Alessandro Apostoli e2aaf4c216 Tools: autotest, fix for frsky not defined error (#4) 2021-02-10 09:27:58 +11:00
Peter Barker d9dd93bcdd autotest: don't run frsky tests armed for the most part 2021-02-10 09:27:58 +11:00
Peter Barker 742d5a9fa0 autotest: add body_frame_velocity 2021-02-08 22:44:32 +11:00
Peter Barker 164da261f1 Tools: initvagrant: install missing cmake so we can build jsbsim 2021-02-07 08:22:28 +11:00
Andrew Tridgell b113fe15ab Tools: added MatekH743-periph to autobuild 2021-02-05 20:13:36 +11:00
Randy Mackay f20fc28a85 Tools: param files to ease SITL setup of GPS-for-yaw 2021-02-05 17:22:27 +09:00
Randy Mackay a09bdcdda1 Tools: default param file to ease using copter SITL with vicon 2021-02-04 20:21:00 +09:00
Peter Barker 567e9733b6 autotest: augment bisect-helper.py to help with flapping tests
- option to allow for a string which must be present in the outout
 - option for strings which must not be present in the output
 - repeat option so test must pass many times
 - elaborate diagnostic output
 - option to run under Valgrind (to provoke races)

The output from each test run is poked into a directory in /tmp

The number of runs a test took to fail is poked into a different file in /tmp, helping to tune the --autotest-test-passes parameter
2021-02-04 16:22:28 +11:00
Peter Barker c2e310d75f autotest: add test for OBSTACLE_DISTANCE_3D message 2021-02-04 15:50:45 +11:00
Peter Barker 393ec5d6f7 autotest: add test for MAVProxy proximity sensor 2021-02-04 12:03:35 +11:00
danlaks d244f22522 Tools: AP_Bootloader: Add AP_HW_SWBOOMBOARD_PERIPH identifier
SpektreWorks Boom Board AP_Periph device
2021-02-04 08:37:32 +11:00
Andrew Tridgell 699e61da57 Tools: auto-build new matek boards 2021-02-03 19:05:12 +11:00
Andrew Tridgell 4a178d5c44 Tools: added new Matek bootloaders 2021-02-03 19:05:12 +11:00
Andy Piper 553425f994 Scripts: add bi-directional dshot firmware to built binaries 2021-02-03 18:49:06 +11:00
Andy Piper 49f0ba058c Bootloaders: add bi-directional dshot bootloaders 2021-02-03 18:49:06 +11:00
Michel Pastor 7ad6dd858b ChibiOS: update SuccexF4 bootloader 2021-02-03 18:37:46 +11:00
Peter Barker cdaff74948 autotest: stop trying to arm in QRTL 2021-02-03 18:22:10 +11:00
Peter Barker f65bee80dc autotest: use BATTERY_STATUS to detect sub reboot
Sub doesn't implement AP_Stats so we have custom reboot detection for
it.

The current look-for-string strategy is flawed - we're missing the
string on reboot
2021-02-03 13:58:17 +11:00
Andrew Tridgell e86e3333a5 Tools: updated KakuteF7 bl 2021-02-03 13:13:32 +11:00
Pierre Kancir e13a35abc1 Autotest: check for empty message before trying to use it 2021-02-03 12:56:01 +11:00
yaapu bb576a49b8 Tools: added autotest for frsky rpm telemetry 2021-02-03 12:49:38 +11:00
Michael du Breuil 15ce4fb034 AP_Periph: Use the ArmingStatus broadcast to set the soft_armed state
This allows things like GPS_RAW_DATA 2 to start to work for SBF GPS's
2021-02-02 10:57:57 +11:00
Samuel Tabor d1578e5ba2 autotest: Update soaring default params in line with specified SOAR_THML_BANK. 2021-01-29 11:20:09 -08:00
Andrew Tridgell 6bc4e995a4 CI: build CubeOrange-periph
this ensures H7 based peripherals (which are getting more common)
don't break
2021-01-27 18:24:03 +11:00
Pierre Kancir c02dfd1214 Autotest: add EndMissionBehavior Test for rover 2021-01-27 08:23:52 +09:00
Andrew Tridgell bb278a1cc7 Tools: allow tempcal_IMU.py to run without existing tcal params
this makes it possible to run the tcal script on a log from a board
that doesn't have any existing temperature calibration params
2021-01-27 09:49:35 +11:00
Pierre Kancir 2b71bf8e99 Autotest: fix subtests completion 2021-01-27 08:27:54 +11:00
Andrew Tridgell 49e2a0caed Tools: fixed valgrind errors with AP_Param::ParamToken 2021-01-26 10:43:09 +11:00
Andrew Tridgell d47afb2406 autotest: added AHRSTrim test and add trim to accel cal test
this ensures the handling of AHRS trim is correct
2021-01-25 16:24:50 +11:00
Andrew Tridgell 3c825bdffc waf: make AP_NavEKF3_core.h a vehicle dependent include 2021-01-24 11:56:52 +11:00
Peter Barker ad2ab333f9 Tools: autotest: allow autotest to connect directly to SITL 2021-01-24 09:25:45 +11:00
Peter Barker 8c7d63433c autotest: clear mission ourselves rather than with MAVProxy at end of test 2021-01-24 09:25:45 +11:00
Peter Barker 30836535d0 autotest: retry dynamic notch test up to 3 times 2021-01-22 11:17:42 +11:00
Pierre Kancir 805493c854 ardupilotwaf: use dynamic generation for ap_periph board name 2021-01-22 05:42:12 +11:00
Siddharth Purohit c54a597571 AP_Periph: pull out supported targets from wscript into a separate file 2021-01-22 05:42:12 +11:00
Peter Barker 2e2e34d784 autotest: correct run_one_test case (vehicle.testname case) 2021-01-21 22:59:34 +11:00
Peter Barker 1fec88af21 autotest: make arming test a little more verbose 2021-01-21 22:15:16 +11:00
Peter Barker 281296832a autotest: retry GyroFFTHarmonic test on failure 2021-01-21 16:45:34 +11:00
Peter Barker 3279400e2e autotest: disarm_with_rc_input shortcuts if it sees rudder-disarm-disabled 2021-01-21 14:25:47 +11:00
Peter Barker f452c6bb51 autotest: break out a statustext_in_collections method from wait_statustext 2021-01-21 14:25:47 +11:00
Andrew Tridgell 3add045924 autotest: fixed accel/gyro threshold consistency for tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell fe7d933976 autotest: use delay_sim_time() in tempcal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell af18e0c755 Tools: review fixes 2021-01-21 13:09:21 +11:00
Andrew Tridgell 58b9cd2c6e autotest: added assert_reach_imu_temperature() abstraction 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5a5ba26468 autotest: expanded accelcal test to check values
this checks the resulting accelcal is correct within 1%
2021-01-21 13:09:21 +11:00
Andrew Tridgell 3e640eed80 autotest: changes for per-IMU biases and scaling 2021-01-21 13:09:21 +11:00
Andrew Tridgell c96e61c0e1 Tools: review fix 2021-01-21 13:09:21 +11:00
Andrew Tridgell 4c315b57ca autotest: run gyro/accel cal at non-reference temperature 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5a180fa7a8 Tools: cope with offset from cal temp to reference temp 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2359a5a1ea Tools: fixed stopping of capture on enable change in tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2cf7e7945c autotest: make tempcal debug output clearer 2021-01-21 13:09:21 +11:00
Andrew Tridgell 6254787c26 Tools: fixed tempcal for when we have gyro cal but no accel cal 2021-01-21 13:09:21 +11:00
Andrew Tridgell e87dbacee7 Tools: switch to fixed reference temperature of 35C 2021-01-21 13:09:21 +11:00
Andrew Tridgell a96b6336b8 Tools: changes from review feedback 2021-01-21 13:09:21 +11:00
Andrew Tridgell 84dda13b42 autotest: use new learn param setup 2021-01-21 13:09:21 +11:00
Andrew Tridgell e8ab8ed29e Tools: improve tempcal script
- allow display of log corrections
 - added online estimator
 - allow learning using TCLR records
2021-01-21 13:09:21 +11:00
Andrew Tridgell 30385fb8cb autotest: use set_parameters() in IMU temp cal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 0c3655b01f autotest: fixed epsilon handling in set_parameters 2021-01-21 13:09:21 +11:00
Andrew Tridgell 327db46c15 autotest: added automatic testing of IMU Temperature calibration 2021-01-21 13:09:21 +11:00
Andrew Tridgell c4664d8e32 Tools: added script to calculate IMU temp compensation parameters
this is run over an onboard log to calculate the INS_TCAL parameters
to enable temperature compensation for gyro and accel
2021-01-21 13:09:21 +11:00
Peter Barker c7a6047904 autotest: add option to retry tests / create and use Test definition object 2021-01-21 10:23:17 +11:00
Peter Barker 03b2473c61 autotest: correct get_parameter_direct attempts decrement 2021-01-20 20:06:46 +11:00
bugobliterator 9e15b5785b ardupilotwaf: fix spec args as distcc doesn't like it 2021-01-20 19:21:14 +11:00
Andrew Tridgell 7e89c05204 autotest: fixed --tracker option to sim_vehicle.py 2021-01-20 11:11:47 +11:00
Andrew Tridgell bd9dd7ff4c Tools: added vnav linux target 2021-01-20 10:06:45 +11:00
Andrew Tridgell c396d15890 Revert "autotest: ensure defaults files don't set already-default-values"
This reverts commit 3d431cd4f1.

It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
2021-01-20 08:54:43 +11:00
Peter Barker 04a52835c0 autotest: correct Rover set-position-target-global-int test
The vehicles doesn't send us set messages!
2021-01-19 21:16:39 +11:00
Peter Barker 1cb86303b4 Tools: add test for maxbotixi2cxl 2021-01-19 11:20:47 +11:00
Iampete1 5e00f5ae48 Tools: ardupilotwaf: ap_library: add genrated bindings to whitle list and add support for ends with whitle listing 2021-01-19 11:18:10 +11:00
Iampete1 8d7299d052 Tools: ardupilotwaf: ap_library.py: allow vehicle in build/ 2021-01-19 11:18:10 +11:00
Peter Barker 8eb670d685 autotest: trim default values from rover defaults files 2021-01-19 10:34:00 +11:00
Peter Barker 3d431cd4f1 autotest: ensure defaults files don't set already-default-values
autotest: mark some vehicles as having external physics models

autotest: add default_params_filename to some vehicle info
2021-01-19 10:34:00 +11:00
Peter Barker 7d86cc08ad autotest: correct SITL commandline for no default parameter file 2021-01-19 10:34:00 +11:00
Peter Barker 8f9d3909f1 autotest: model_defaults_filepath always returns a list 2021-01-19 10:34:00 +11:00
André 30eed3103b sim_vehicle fix 2021-01-19 06:30:12 +11:00
Peter Barker 210b0e7c5f autotest: stop emitting port 14550 all the time
this can confuse other things going on on the same machine.  It is still
available by specifying --viewerip if desired
2021-01-18 21:46:43 +11:00
Peter Barker 30929e7f1a autotest: add verbose option to assert_sensor_state 2021-01-18 21:25:58 +11:00
Peter Barker 2c0e3751a9 autotest: reboot after moving from EKF type 10 to EKF type 2
Bad things happen with home set but origin not
2021-01-18 20:48:11 +11:00
Peter Barker 662e86780b autotest: reduce motor vibration for landing 2021-01-18 20:14:08 +11:00
Peter Barker 6becd90df0 autotest: increase timeout on DO_CHANGE_SPEED test 2021-01-18 19:08:46 +11:00
Peter Barker 5848ff7512 autotest: eliminate race condition in plane fence static test 2021-01-18 16:32:21 +11:00
Peter Barker e9c6c08a97 autotest: remove 'make' compatability from sim_vehicle 2021-01-18 16:24:09 +11:00
Peter Barker 6865649b9b autotest: tidy and correct ekf lane switching test 2021-01-18 15:19:39 +11:00
Peter Barker ba1973d343 autotest: parse messages when setting parameters
This breaks some tests which are waiting on statustexts while setting
parameters
2021-01-18 15:19:39 +11:00
Peter Barker 48a38f3ee2 autotest: wait for GPS fix before installing position validation handling 2021-01-18 15:11:19 +11:00
Peter Barker 2d62fb99b1 autotest: force-disarm copter before reboot in GCS failsafe tests 2021-01-18 14:17:32 +11:00
Andrew Tridgell d9de0ef649 autotest: added copter-bfx params 2021-01-17 12:25:47 +11:00
Randy Mackay b18e5966f7 Tools: fixes from peer review as AHRS default changed to EKF3 2021-01-16 08:24:23 +09:00
Randy Mackay 2f51b59de4 Tools: copter test parameter validation waits 10sec before starting
This allows the GPS driver to initialise which avoids an EKF3 source requires GPS failure
2021-01-16 08:24:23 +09:00
Randy Mackay bb926a2976 Tools: autotest fly_gyro_fft disables EKF2 and EKF3
fly_gyro_fft_harmonic also disables EKF2 and EKF3
2021-01-16 08:24:23 +09:00
Randy Mackay f9e7d59756 Tools: Copter.ArmFeatures fixups for EKF3
changed to disable the simulated GPS instead of disabling the driver
expected EKF flags are slightly different
2021-01-16 08:24:23 +09:00
Randy Mackay 9c56b406be Tools: Copter.AltEstimation fixes
disable baro so EKF has no altitude estimate
add check that mode change to ALT_HOLD failed
2021-01-16 08:24:23 +09:00
Randy Mackay 1f8b48e8f7 Tools: common autotest spelling fix
reach should be reached
2021-01-16 08:24:23 +09:00
Randy Mackay f68f26e75d Tools: Copter.VisionPosition config for EKF3 2021-01-16 08:24:23 +09:00
Randy Mackay d2bdc949b2 Tools: Copter.OpticalFlowLimits checks altitude 2021-01-16 08:24:23 +09:00
Randy Mackay 0ba696f761 Tools: Copter.OpticalFlowLimits config for EKF2/3 2021-01-16 08:24:23 +09:00
Randy Mackay d00194c60a Tools: copter test_rangefinder_switchover config for EKF2/3 2021-01-16 08:24:23 +09:00
Randy Mackay bd8b85d1e5 Tools: remove ekf2 enable from copter defaults 2021-01-16 08:24:23 +09:00
Peter Barker cd8a393ac2 autotest: create own RC thread to handle setting of RC overrides
autotest: prevent method-on-undef problem in case of early test failure

autotest: plumb MAVProxy rc input back in for switch test

autotest: close off rc thread in case of timeout
2021-01-15 20:56:30 +11:00
Randy Mackay d02a61a65d Tools: default parameters for hexsoon td860 2021-01-14 13:13:32 +09:00
nkruzan c0e4ef4219 Tools: vagrant: update path to CMAC-circuit.txt 2021-01-14 11:34:10 +11:00
Jacob Walser e235c379bf Frame_params: rename bluerov2 4.0 firmware defaults files
These files apply to 4.0.0...4.0.2, not only 4.0.2
2021-01-13 12:50:28 -05:00
Peter Barker 1dad0ecb46 autotest: disarm vehicle in case vibration test excepts 2021-01-13 19:46:13 +11:00
Peter Barker 47aea5f44c autotest: print stack traces for caught exceptions 2021-01-13 19:46:13 +11:00
Pierre Kancir fc0e2fec6b Tools: add caching for --target= completion that is long 2021-01-13 19:20:57 +11:00
Andy Piper a07cbc8706 Tools: BeastF7 bootloader
add BeastH7/BeastF7 to builds
update BeastF7 bootloader
2021-01-13 18:09:33 +11:00
Peter Barker e85e6d3375 autotest: use new set_parameters in place of many set_parameter calls
autotest: use set_parameters for applying from parameter file

autotest: use set_parameters in place of many set_parameter calls
2021-01-13 15:09:29 +11:00
Peter Barker 2917c75f35 autotest: add option to timeout parameter fetching in system time 2021-01-13 15:09:29 +11:00
Peter Barker 83f2f365c0 autotest: implement a more efficient set_parameters, implement set_parameter in terms of it 2021-01-13 15:09:29 +11:00
Peter Barker f478666700 autotest: correct scripting test for missing message
The message could pass us by
2021-01-13 12:24:17 +11:00
Peter Barker 8497f8fc73 autotest: correct some timeout issues around Copter takeoff 2021-01-13 12:24:17 +11:00
Peter Barker 0a39c49711 autotest: gpstovicon: reboot after setting new EKF type rather than before 2021-01-13 12:24:17 +11:00
Peter Barker 252b166099 autotest: reboot after Copter gyrofft test
Really weird things happen if you switch from EKF2 to EKF10 - like your
home position being set but your origin not!
2021-01-13 12:24:17 +11:00
Peter Barker e7aefc7fe4 autotest: make polling home position quiet by default 2021-01-13 12:24:17 +11:00
Peter Barker 5318538182 autotest: reboot SITL when moving from EKF10 to EKF2 in mag test
Bad things happen when moving from one to the other...
2021-01-13 12:24:17 +11:00
Peter Barker 987466bc3d autotest: increase timeout on avoidance-corners test
Race conditions can mean angles are less than expected
2021-01-13 12:24:17 +11:00
Peter Barker fdb5b5e6d6 autotest: correct dataflash transfer test for long periods
This came in with a 35 second delay, which is rather spectacular given
the 5 second loop it is in.

2021-01-11T11:54:30.3046835Z dataflash_logger status
2021-01-11T11:54:30.3047406Z MANUAL> DFLogger: Active Rate(35s):408.788kB/s Block:65034 Missing:0 Fixed:0 Abandoned:0
2021-01-11T11:54:30.3048195Z Timed out looking for Active Rate\([0-9]s\):([0-9]+[.][0-9]+)
2021-01-11T11:54:30.3048801Z AT-0472.3: Exception caught: 60
2021-01-13 12:24:17 +11:00
Willian Galvani 9020c79677 Tools: Frame_params: Sub: fix parameter types
These files are consumed by QGroundControl. This means integers
should not have a decimal point.
2021-01-12 11:44:25 -08:00
Peter Barker 3a264e0a76 autotest: use LOG_STRUCTURE_FROM as key string (don't need library name) 2021-01-12 17:44:24 +11:00
Pierre Kancir 409177d22a Tools: remove duplicate kg/m.m 2021-01-12 10:21:55 +11:00
Josh Henderson 0052e4d528 Tools: auotest add LOG_STRUCTURE_FROM_AHRS 2021-01-12 10:13:22 +11:00
Mirko Denecke d08487b8ae AP_Periph: fix command to build bootloader 2021-01-11 12:27:44 -08:00
Andrew Tridgell faae0a8609 Tools: added support for v3 Invensense sensors
starting with ICM-40609, ICM-42688 and ICM-42605
2021-01-11 14:43:35 +11:00
Peter Barker 4d19ff6b26 autotest: prompt ArduPilot for SYSTEM_TIME message during reboot
This helps us actually execute the timeouts appropriately and thus
re-fetch the STAT_BOOTCNT parameter we use for detecting the reboot

Eliminates annoying pauses during testing.
2021-01-09 16:20:12 +11:00
Peter Barker 8e6d144d72 autotest: re-raise KeyboardInterrupt after closing pexpects
this gives a stack trace, which is handy if the tests get caught
indefinitely somewhere
2021-01-09 15:16:50 +11:00
Peter Barker 5120ebf2f6 autotest: add a set_parameters method 2021-01-08 23:51:33 +11:00
Jacob Walser c5ec0cfdee Frame_params: (BlueRov2/Sub-3.5.1) revert to 19086e34
this file is targeted specifically at 3.5.1 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser 4c13a5ae4f Frame_params: (BlueRov2 Heavy/Sub-3.5.2) revert to 9897ff60
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser 567c6d4991 Frame_params: (BlueRov2/Sub-3.5.2) revert to 83bb1e7f
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser 367e7b35de Frame_params: add defaults for bluerov2 on Sub 3.5.4 firmware 2021-01-07 07:39:59 -08:00
Jacob Walser 3ce9d9eb44 Frame_params: add defaults for bluerov2 on Sub 4.0.2 firmware 2021-01-07 07:39:59 -08:00
Andrew Tridgell ad29be14c6 autotest: added ARACE_hand location 2021-01-07 18:42:33 +11:00
Peter Barker 4fb4beab67 Tools: adjust decode_watchdog.py for new message format 2021-01-07 17:06:09 +11:00
Peter Barker 7474948971 autotest: add test for mavlink rangefinder out-of-range-low 2021-01-06 15:33:41 +11:00
Peter Barker fdd0297f12 autotest: add more tests for MAVLink rangefinder
Allows for finer-grain control over what messages we're sending.
2021-01-06 15:33:41 +11:00
Andrew Tridgell ae6569ab67 AP_Periph: updated release notes for 1.2.0 2021-01-06 07:59:33 +11:00
Andrew Tridgell 7672f0a2ce autotest: added NDRCC field 2021-01-05 21:13:12 +11:00
Andrew Tridgell b5476c6e5c autotest: added ExternalAHRS test 2021-01-05 21:13:12 +11:00
Andrew Tridgell 53e56d2933 Tools: added SERIAL for decode_devid 2021-01-05 21:13:12 +11:00
Andrew Tridgell 5840d24ed9 Tools: build AP_ExternalAHRS 2021-01-05 21:13:12 +11:00
Peter Barker 487f36146d Tools: add support for simulated TSYS01 temperature sensor 2021-01-05 12:01:51 +11:00
Peter Barker 6433647d9e autotest: add trivial autotest for TSYS01 temperature 2021-01-05 12:01:51 +11:00
Randy Mackay 66b2b988c4 Tools: update gps-vicon switching test params 2021-01-05 10:58:06 +11:00
Andrew Tridgell 90b8893b4a Tools: removed dependency on genromfs and cmake
we don't need these any more
thanks to James for noticing
2021-01-05 10:18:35 +11:00
Peter Barker 2240a60e20 autotest: add trivial test for set-position-target-local-ned 2021-01-05 08:13:02 +09:00
Peter Barker 53336595e1 autotest: add simple test for Rover set_attitude_target handling 2021-01-05 08:13:02 +09:00
auturgy 1c4873cece Tools: build_autotest.sh update email address
drones_discuss is well obsolete.  I've used ardupilot.devel@google.com for now although we could do better, or simply choose not to emit spam.
2021-01-04 14:41:43 +11:00
Tom Pittenger ee573a0275 AP_Periph: add NTF (Notify) full library and it's params 2021-01-03 16:24:12 -08:00
Pierre Kancir 61d1f747ba Tools: completion: bash better completion for binaries 2021-01-03 12:33:25 +11:00
Pierre Kancir d52c69af81 Tools: completion: bash better completions for sim_vehicle.py 2021-01-03 12:33:25 +11:00
Pierre Kancir bee767a9aa Tools: completion: better completion for waf 2021-01-03 12:33:25 +11:00
Pierre Kancir 60f2e119a5 Tools: completion: bash complete subtest on autotest.py 2021-01-03 12:33:25 +11:00
Pierre Kancir 5f033a551a Tools: completion: add --target completion 2021-01-03 12:33:25 +11:00
hendjosh 7f999ef64a Tools: Change Cygwin default install location to Cygwin64 2021-01-03 09:49:05 +11:00
Peter Barker f1067eee81 Tools: build_ci.sh: re-add KakuteF7Mini for bidir d-shot testing 2021-01-02 22:40:40 +11:00
Andy Piper f702288ad2 autotest: correct number of logs 2021-01-02 22:30:08 +11:00
Andrew Tridgell 529bc6b77c autotest: fixed compatibility with python on wiki server 2021-01-02 16:34:29 +11:00
Hwurzburg f0954f35a7 Tools: change KakuteF7Mini build to KakuteF7 to get biggest flash 2021-01-02 15:55:25 +11:00
auturgy 3b7207a5e4 Tools: Update board_types.txt
Cross-alignment with PX4, plus whitespace fixes
2021-01-01 17:31:44 +11:00
Andrew Tridgell eaf7e7354a Tools: added locations.txt to ROMFS for SITL 2021-01-01 17:30:32 +11:00
Andrew Tridgell 19e597ec3f AP_Periph: check for null uart in msp 2021-01-01 15:40:13 +11:00
Andrew Tridgell 37506c2f3a AP_Periph: added MSP_PORT parameter
allows MSP to be enabled/disabled
2021-01-01 15:40:13 +11:00
David B. Bitton 8b2e69162d AP_Periph: add support for Toshiba LED 2020-12-31 11:02:10 -08:00
Peter Barker 65cffdad5a autotest: print stack traces when exceptions caught 2020-12-31 17:43:23 +11:00
Peter Barker 38ea62c5d7 autotest: send mode change messages directly rather than via MAVProxy 2020-12-31 17:43:06 +11:00
Peter Barker d31f676c33 autotest: don't use MAVProxy for uploading using fencepoint protocol 2020-12-31 17:42:50 +11:00
Peter Barker 2b06ae9aa0 autotest: create and use a wait_sensor_state method 2020-12-31 17:42:33 +11:00
Peter Barker 7c7fb67829 autotest: fixes for AFS test 2020-12-31 17:42:20 +11:00
Peter Barker 7f79ddf3ff autotest: CRSF: remove pointless wait-ready-to-arm 2020-12-31 17:42:06 +11:00
Peter Barker 6c48a38497 autotest: avoid zero-byte-read on log download 2020-12-31 17:39:53 +11:00
Peter Barker 6908a776fa autotest.py: timeout after 5400 seconds 2020-12-31 14:55:32 +11:00
Peter Barker 8abf9a82f3 autotest: reliability improvements for EKF failover tests 2020-12-31 14:49:25 +11:00
Andrew Tridgell 939d8509b2 autotest: added ARACE flight locations 2020-12-30 12:33:58 -08:00
Andy Piper b5688c023c Tools: add KakuteFMini to CI f7 build to test bi-directional dshot 2020-12-30 19:14:16 +11:00
Pierre Kancir 69fab70582 Tools: use lxml for xml generation
fix caracters
fix indentation
validate xml
2020-12-30 18:19:43 +11:00
Andy Piper efb2e9f81a Tools: bootloader for iFlight Beast H7 AIO 2020-12-30 18:13:03 +11:00
Tom Pittenger 6bb2bec4f3 AP_Bootloader: add boardIDs for CubeORange/Black-periph, pixracer-periph 2020-12-29 07:52:39 -07:00
ukmook 44ce2b225c Tools/bootloaders: add Pixracer-periph bootloader image 2020-12-29 07:52:39 -07:00
Peter Barker 12505c4c28 autotest: add tests for new higher-channel override semantics 2020-12-29 15:03:34 +11:00
Peter Barker b53b30ea51 autotest: split out a get_rc_channel_value() 2020-12-29 15:03:34 +11:00
Tom Pittenger 71859c9893 AP_Periph: rename AP_PERIPH_<feature>_DEFAULT to HAL_PERIPH_<feature>_DEFAULT 2020-12-28 09:16:02 +11:00
Andrew Tridgell 80b3c2491f Tools: rebuild IO firmware 2020-12-28 08:27:23 +11:00
Tom Pittenger 7af731fbda AP_Periph: change GPS and Rangefinder to use port stored in param 2020-12-25 16:24:50 -07:00
Tom Pittenger 4c484c8577 AP_Periph: compile-error fix for for hwdef with HAL_NO_ROMFS_SUPPORT 2020-12-25 16:24:50 -07:00
Peter Barker b02f0ee51f autotest: make Sub's setting of FS_GCS_ENABLE persist across wipes 2020-12-25 12:18:01 +11:00
Peter Barker 26bbedd777 autotest: remove un-needed parameter wipe after soaring test 2020-12-25 12:18:01 +11:00
Peter Barker 0a5eedb05a autotest: wipe and reinitialise parameters when resetting SITL commandline
Should fix this scenario:
 - Plane soaring test uses different defaults file
 - soaring test sets a parameter away from default value
 - context pop sets it back to the value in the defaults file
 - it is now in permanent storage with the default found in the
different defaults file used by the soaring test
 - we finish running the soaring test an reset the SITL command line
back to default, with the old defaults file
 - we go on to running the next test.  At this point the value for that
parameter is the default in the defaults file used by the soaring test.

Something similar applies in the Callisto test.
2020-12-25 12:18:01 +11:00
Peter Barker 0788b46374 autotest: add trivial test for Callisto 2020-12-25 12:18:01 +11:00
Peter Barker 5d23dc2314 autotest: avoid replicating enumeration value names from pymavlink 2020-12-24 00:22:52 +11:00
Pierre Kancir 06d6526ba6 Autotest: correct wait_distance_to_home comment 2020-12-24 00:22:52 +11:00
Pierre Kancir 824b9c1dc9 Autotest: add setpoint_target test for copter 2020-12-24 00:22:52 +11:00
Pierre Kancir 67533c3284 Autotest: add setpoint_target tests on rover 2020-12-24 00:22:52 +11:00
Pierre Kancir 6565309325 Autotest: add test_set_velocity_global_int tests 2020-12-24 00:22:52 +11:00
Pierre Kancir 10673122c0 Autotest: add test_set_position_global_int tests 2020-12-24 00:22:52 +11:00
Pierre Kancir 62a1fa1052 Autotest: add wait_speed_vector and wait yaw_speed functions 2020-12-24 00:22:52 +11:00
Pierre Kancir 0ca8e817d5 Autotest: wait_and_maintain add support of Vector3 2020-12-24 00:22:52 +11:00
Pierre Kancir dbaeb668f1 Autotest: add MAV_FRAME dictionary 2020-12-24 00:22:52 +11:00
Pierre Kancir 0bf7bd7f68 Autotest: add set_position mask to common.py 2020-12-24 00:22:52 +11:00
Pierre Kancir 60c6666941 Tools: ardupilotwaf: fix scripting inclusion on build_binaries.py 2020-12-23 22:52:52 +11:00
Peter Barker 662814d6bd autotest: reboot after running Copter vibe tests
The EKF type (at the very least) requires a reboot to revert to its
original value.
2020-12-22 23:51:54 +11:00
Peter Barker 69ef0937f4 autotest: add trivial test just to cover the Airspeed_DLVR code 2020-12-22 23:07:24 +11:00
Tom Pittenger eb3da385dd AP_Periph: gracefully handle PWM and Params during reboot and bot up as PWM safety on 2020-12-21 18:27:07 -08:00
Siddharth Purohit 4d91071e7e AP_Periph: ignore unused-function error for helper fix_float16() 2020-12-21 18:27:07 -08:00
Tom Pittenger 07aeab5c44 AP_Periph: add Servo OUT support 2020-12-21 18:27:07 -08:00
Iampete1 6f92e6298a Tools: add Kg/m.m to param units 2020-12-22 11:00:59 +11:00
giacomo892 c8d874676f AP_Periph: MSP fix last baro ms 2020-12-22 10:08:34 +11:00
Randy Mackay d964fa2307 Tools: fixup EKF source pre-arm test
although setting COMPASS_USE/2/3 to zero disables the pre-arm for EK3_SRCx_YAW = 1 (Compass) the pre-arm still triggers if EK3_SRCx_YAW = 3 (External Compass Fallback)
2020-12-21 16:56:38 +09:00
Andrew Tridgell ba78fecaaa autotest: added Kris location
helps with testing missions from Kris in China
2020-12-21 12:05:50 +11:00
Andrew Tridgell 0bf0fbe687 AP_Periph: prepare for 1.2beta2 2020-12-19 11:46:56 +11:00
Tom Pittenger 2a4fef73dd AP_Periph: change ADSB to use param ADSB_PORT instead of define 2020-12-17 23:24:04 -08:00
Tom Pittenger 84e578b3df AP_Bootloader: respect HAL_BOOTLOADER_TIMEOUT when CAN and SERIAL/USB is enabled 2020-12-18 16:35:57 +11:00
Tom Pittenger 5238f85091 AP_Periph: add BRD_SERIAL_NUM and append CAN_APP_NODE_NAME 2020-12-17 21:28:10 -08:00
Peter Barker 4efcf16005 autotest: correct number of bytes we expect to download
We request a fixed number of bytes, which could be more or  less than the
log file size.
2020-12-18 13:35:15 +11:00
Peter Barker 8e71e2505a autotest: correct lookup for most recent log file 2020-12-18 13:35:15 +11:00
Randy Mackay 50f9eee54c Tools: relax fly_guided_stop climb rate tolerance to 1cm/s 2020-12-18 08:32:21 +09:00
hendjosh 8567b829a6 Tools: add name to GIT_Test.txt 2020-12-18 09:04:32 +11:00
Mike R 81745b0e64 Tools: Add Goretovka (RF, Moscow region) location 2020-12-18 08:04:41 +11:00
Peter Barker 76b0b0429f autotest: add another example on bisect helper 2020-12-18 07:48:34 +11:00
Tom Pittenger a285a741df AP_Periph: implement HAL_PERIPH_ALLOW_MAVLINK_UART_OR_USB_REBOOT_CMD 2020-12-18 06:59:09 +11:00
Mouna 2763ce027e Tools: adding my name to GIT_Success 2020-12-16 20:28:09 +09:00
Pierre Kancir 7a2a60e65c Tools: rover: correct test_setting_modes_via_mavproxy_switch for RTL and AUTO 2020-12-16 17:27:07 +09:00
Pierre Kancir 871b9fc12d Tools: plane : initial_mode_switch_mode 2020-12-16 17:27:07 +09:00
Pierre Kancir e4707c20ea Tools: rover: add initial_mode_switch_mode 2020-12-16 17:27:07 +09:00
Pierre Kancir 9550721ae4 Tools: add initial_mode testing 2020-12-16 17:27:07 +09:00
Sebastian Witt fe8ccca9a9 Tools: Add Diatone MambaF405 MK2 2020-12-16 19:07:07 +11:00
Andrew Tridgell f10f7d971d Tools: added --vehicle-binary to sim_vehicle.py
this is useful for using a pre-built binary
2020-12-16 08:45:11 +11:00
Pierre Kancir 7d88d104b8 Tools: put Rover SlewRate test on disable list for now 2020-12-16 08:25:52 +11:00
Andrew Tridgell 087eb8eeea Tools: rebuild CAN bootloaders for AP_Periph 2020-12-15 12:26:14 -08:00
Andrew Tridgell e0e4198358 AP_Bootloader: fixed can bootloader with old UAVCAN GUI tool
the part that was failing was the write of the leading words. That
part is not actually needed in this bootloader as we use a CRC before
running, so remove it, which fixes the old windows GUI tool.

This also saves some memory and flash
2020-12-15 12:26:14 -08:00
Dr.-Ing. Amilcar do Carmo Lucas fb8e1f4b9d Tools: Added support for 1/s and kg/m/m parameter units 2020-12-15 18:22:36 +11:00
Andrew Tridgell 23a9a14d64 Tools: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell bab1bff2b9 Tools: added f303-M10070 bootloader 2020-12-14 16:31:03 +11:00
Andrew Tridgell 3cf71d11a9 AP_Periph: mark version as 1.3dev 2020-12-13 10:32:30 +11:00
Andrew Tridgell 52f66f3654 AP_Periph: updated release notes for 1.2.0beta1 2020-12-13 10:31:35 +11:00
Tom Pittenger 4b47ddf556 AP_Periph: add battery monitor to AP_Periph README 2020-12-13 09:35:28 +11:00
Phillip Kocmoud ce87b62dcc AP_Periph: Add alternate ordering of NCP5623 LED colors 2020-12-12 14:57:35 +11:00
Paul Riseborough 4cf78c34e7 Tools: Add autotest for copter wind estimation and baro correction 2020-12-11 15:21:41 +11:00
Paul Riseborough a3b5901218 autotest: Fix failing copter fly_square test
This test should be flown in ALT_HOLD, not  STABILIZE as that is better mode to test the record waypoint function becasue it removes the need to fine tune the RC3 value to match thrust/weight variation as the hover thrust is not learned fast enough at the start of the test.
2020-12-11 15:21:41 +11:00
Paul Riseborough e835da41fa Tools: Define momentum drag 2020-12-11 15:21:41 +11:00
Andrew Tridgell 5fc68a1ce5 autotest: adjust for new baro SITL param names 2020-12-11 15:21:41 +11:00