Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,309 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

891 Commits

Author SHA1 Message Date
Randy Mackay 33fe778cdd InertialSensor_PX4: resolve compiler warning 2014-02-21 13:53:34 +09:00
Andrew Tridgell fe0cb23733 AP_InertialSensor: fixed HIL for 400Hz INS 2014-02-19 10:29:00 +11:00
Mike McCauley 2c94a40310 AP_InertialSensor: AP_InertialSensor_Flymaple Remove unnecessary 
comment
 2014-02-17 05:56:37 +11:00
Mike McCauley dd6abb49a9 AP_InertialSensor: AP_InertialSensor_Flymaple::healthy() was required after 
all.
 2014-02-17 05:56:37 +11:00
Mike McCauley 0a43cf8c5c AP_InertialSensor: AP_InertialSensor_Flymaple removed redundant definition of 
healthy().
 2014-02-17 05:56:37 +11:00
Mike McCauley f7279aa13f AP_InertialSensor: AP_InertialSensor_Flymaple implement get_gyro_health 
and get_accel_health.
 2014-02-17 05:56:37 +11:00
Andrew Tridgell f9d0747750 AP_InertialSensor: fixed example build 2014-02-15 06:39:35 +11:00
Andrew Tridgell 3617c65af7 AP_InertialSensor: make HIL treat time like PX4 does 2014-02-15 05:48:20 +11:00
Andrew Tridgell b1c5f23bbd AP_InertialSensor: make get_delta_time() const 
allows use from AP_NavEKF
 2014-02-15 05:29:47 +11:00
Randy Mackay b7565affcd INS: add support for 400hz for PX4 2014-02-15 05:27:33 +11:00
Andrew Tridgell a95a3142e0 AP_InertialSensor: use fixed size arrays 
apparently helps SITL build on MacOS
 2014-02-08 19:32:26 +11:00
Andrew Tridgell 045efdb084 AP_InertialSensor: fixed example builds 2014-01-30 13:33:38 +11:00
Andrew Tridgell 58d3729d16 AP_InertialSensor: fixed default health functions 
this fixes INS on APM1. Thanks to Mike McCauley for noticing this!
 2014-01-22 22:08:28 +11:00
Don Gagne 68b3b31499 Param doc typo 2014-01-18 10:18:58 +09:00
Randy Mackay 965e5b2dfd INS: check for good calibration for 10seconds 
Shortened gyro calibration commit also halved the total time we would
look for a good gyro calibration.  This restores the total time to 10
seconds.
 2014-01-17 12:48:11 +09:00
Randy Mackay 1f76ada9dd INS: shortened gyro calibration 
Removed delays before calibration, reduced number of samples taken,
widened convergence criteria
 2014-01-16 13:40:49 +09:00
Randy Mackay a400ddeb88 INS: replace APM with vehicle in accel calibrate 2013-12-28 10:41:49 +09:00
Andrew Tridgell 8dd34f8bc4 AP_InertialSensor: fixed example build 2013-12-17 11:51:37 +11:00
Andrew Tridgell 6d39cf5e49 AP_InertialSensor: another attempt at fixing the spurious bad gyro health warnings 
cope with _get_sample() not being called for a while
 2013-12-14 15:47:49 +11:00
Andrew Tridgell 99e2dc87c9 AP_InertialSensor: prevent INS healthy errors while initialising 
during gyro cal we shouldn't mark the gyro unhealthy
 2013-12-13 20:47:24 +11:00
Andrew Tridgell 23a112c5d5 AP_InertialSensor: reduce the number of format string warnings 2013-12-11 17:29:27 +11:00
Andrew Tridgell 433ad19335 AP_InertialSensor: fixed loop limits 
stops pointless operations
 2013-12-11 14:57:13 +11:00
Andrew Tridgell e54fc6b8e3 AP_InertialSensor: make sure we wait for a sample before update() 2013-12-11 13:50:50 +11:00
Andrew Tridgell cba0cb963a AP_InertialSensor: auto-failover to working gyro and accel 2013-12-09 20:02:04 +11:00
Andrew Tridgell a0688a69d4 AP_InertialSensor: generalise the accel/gyro calibration for N sensors 2013-12-09 17:34:06 +11:00
Andrew Tridgell d9b6f7f0f7 AP_InertialSensor: implement up to two sensors on PX4 2013-12-09 17:34:05 +11:00
Andrew Tridgell 2753449e75 AP_InertialSensor: added support for multiple accel/gyro devices 
this makes it possible to ask for the gyro and accel vectors from
secondary INS devices.
 2013-12-09 17:34:05 +11:00
Randy Mackay fd9b115d01 INS: move Product ID to @User Advanced 2013-11-26 22:18:28 +09:00
Andrew Tridgell 71bb462ad0 AP_InertialSensor: use fabsf() 2013-11-15 10:43:10 +11:00
Andrew Tridgell aef9289476 AP_InertialSensor: added INS_PRODUCT_ID values 2013-11-15 10:43:10 +11:00
Andrew Tridgell f10a4b04ae AP_InertialSensor: make PX4 healthy call _get_sample() 
this prevents a false positive during times like arming where we are
not reading the sensors
 2013-11-10 17:03:16 +11:00
Andrew Tridgell 80def01fbe AP_InertialSensor: fixed semaphore error on startup for MPU6000 2013-11-09 11:26:50 +11:00
Andrew Tridgell f5299e2e11 AP_InertialSensor: added healthy check for PX4 and HIL 
used to detect bad accels
 2013-11-07 13:53:59 +11:00
Andrew Tridgell 9ecd889e9d AP_InertialSensor: detect bad MPU6000 SPI transactions and lower bus speed 
this uses bad data or bad INT_STATUS values from the MPU6000 to detect
the sensor running too fast and lower bus speed
 2013-11-07 12:48:17 +11:00
Andrew Tridgell b98bcbf715 AP_InertialSensor: automatically lower bus speed on mpu6k bad reads 2013-11-07 12:48:16 +11:00
Andrew Tridgell bdc40cc7df AP_InertialSensor: try to lower SPI bus speed on errors 2013-11-07 12:48:16 +11:00
Andrew Tridgell 1cd070a2e7 AP_InertialSensor: use const reference returns 
saves some vector copies
 2013-11-04 21:21:42 +11:00
Andrew Tridgell f4dde44b8d AP_InertialSensor: SITL doesn't use Oilpan code any more 2013-11-02 21:41:11 +11:00
Mike McCauley fe6cacf081 AP_InertialSensor: Minor correction to comments in AP_InertialSensor_Flymaple.cpp 2013-10-14 11:34:47 +10:00
Andrew Tridgell 7831113f84 AP_InertialSensor: yield the CPU for the right time in wait_for_sample() 
this improves timing performance
 2013-10-14 08:45:58 +11:00
Andrew Tridgell 8532e2bff8 AP_InertialSensor: fixed timing of PX4 sensor samples 2013-10-13 22:15:50 +11:00
Andrew Tridgell 9833900f91 AP_InertialSensor: run MPU6000 sensor register reads at 8MHz 
run other register IO at 500kHz
 2013-10-13 11:03:08 +09:00
Andrew Tridgell b3af59cc0c AP_InertialSensor: don't build L3G4200D example 2013-10-10 09:54:20 +11:00
Andrew Tridgell a04c056598 AP_InertialSensor: remove unused get_last_sample_time_micros() 2013-10-10 09:54:19 +11:00
Andrew Tridgell 5d685385eb AP_InertialSensor: use gyro sample count on L3G4200D 
this gives more even timing in ArduCopter
 2013-10-08 19:20:34 +11:00
Andrew Tridgell 6444b0bddd AP_InertialSensor_L3G4200D: a sample is only available if gyro had a sample 2013-10-08 19:20:34 +11:00
Andrew Tridgell e5e4cdee18 AP_InertialSensor: added wait_for_sample() API call 
this waits for a new INS sample to arrive, using whatever method is
most efficient on each INS type
 2013-10-08 17:31:15 +11:00
Andrew Tridgell c17a5e5ed1 AP_InertialSensor: added a small delay in accel calibration 
allows threads to run on Linux
 2013-10-08 11:50:54 +11:00
Andrew Tridgell 12af23bb7c AP_InertialSensor: added L3G4200D example 2013-10-08 11:50:53 +11:00
Andrew Tridgell 1aabd7155e AP_InertialSensor: added L3G4200D driver 
this is for a cheap ebay 10DOF sensor
 2013-10-08 11:50:53 +11:00
Mike McCauley c90c1b9998 AP_InertialSensor: Improvements to Flymaple sensors 
Fix a bug that caused hang after 71 minutes. Use I2CDriver semaphore.
Remove test for in_accumulate: not needed.
 2013-10-04 07:21:55 +10:00
Mike McCauley 9ea1108d4e AP_InertialSensor: Flymaple filter constructor arguments non non-zero 2013-10-04 07:21:55 +10:00
Andrew Tridgell dda68bddcb AP_InertialSensor: updates for AP_HAL::MemberProc 2013-09-30 21:06:42 +10:00
Andrew Tridgell 1191607036 AP_InertialSensor: enable Oilpan on Linux 2013-09-29 00:57:13 +10:00
Andrew Tridgell cf726c6642 AP_InertialSensor: rename Stub to HIL 
more consistent with other drivers
 2013-09-28 22:04:15 +10:00
Andrew Tridgell 03036c632d AP_InertialSensor: use new scheduler API 2013-09-28 21:24:03 +10:00
Andrew Tridgell 096660c4f9 AP_InertialSensor: mark flymaple as nobuild 
won't build with build_examples.sh script
 2013-09-27 16:57:13 +10:00
Mike McCauley e4eef61ec3 AP_InertialSensor: Flymaple sensors improvements 
Flymaple sensors are now raw sampled at 800Hz, and LowPassFilter2p is used
to filter to the desired filter cutoff frequency.
Flymaple sensor polling is done in the main thread NOT in the timer
interrupts.
 2013-09-27 15:45:59 +10:00
Mike McCauley 23429b6b9c AP_InertialSensor: Flymaple now polls sensors at 800Hz. More changes to 
come...
 2013-09-27 15:45:57 +10:00
Mike McCauley 29bced05bd AP_InertialSensor: Added examples/Flymaple for testing 2013-09-27 15:45:54 +10:00
Mike McCauley d11f952ef1 AP_InertialSensor: Formalise and document Flymaple Gyro scaling factor 2013-09-27 15:45:52 +10:00
Mike McCauley adfcdca074 AP_HAL_FLYMAPLE: Sensor reading improvements 
I2C speed increased to 400kHz
Accelerometer 8g max, Normal power, 800Hz bandwidth
Gyros: 2000 degrees/sec, 256Hz LPF, 8kHz internal sample rate
 2013-09-27 15:45:47 +10:00
Randy Mackay f7ba0438ef InertialSensor: remove DMP 
this saves 3K of flash
 2013-09-27 10:43:33 +09:00
Andrew Tridgell 14636e1cdf AP_InertialSensor: changed num_samples_available() to sample_available() 
this makes the interface clearer. It also fixes a 3D accel cal bug.
 2013-09-27 10:49:00 +10:00
Andrew Tridgell 1ec5cbed81 AP_InertialSensor: removed SMACCM support 2013-09-26 22:38:31 +10:00
Mike McCauley e4b5d0a3d6 AP_InertialSensor: Final Flymaple orientation fixes 2013-09-25 15:46:07 +10:00
Mike McCauley 276068356e AP_InertialSensor: Further Flymaple orientation fixes 2013-09-25 15:46:07 +10:00
Mike McCauley b02dbca9d4 AP_InertialSensor: fix orientation of Flymaple sensors 2013-09-25 15:46:07 +10:00
Mike McCauley 4d10a96077 AP_InertialSensor: Add flymaple support 2013-09-24 13:51:27 +10:00
Andrew Tridgell 770b7b5901 AP_InertialSensor: prevent a lockup in MPU6000 driver 
thanks to the VRBrain port for noticing this bug.

Failing to get the semaphore is an expected error with the MPU6000, as
we read data both from timer context and mainline code. That means
semaphore conflicts are inevitable. We shouldn't consider them an
error, and shouldn't panic when some arbitrary number of them have
happened since boot.

Instead the wait_for_sample() code checks that we receive new data at
least every 50ms. That is a much safer test.
 2013-09-23 22:48:36 +10:00
Andrew Tridgell 4d2bfe1078 AP_InertialSensor: fixed another example build 2013-09-19 21:09:34 +10:00
Andrew Tridgell e1aa6e3ff1 libraries: fixed examples for no flash_leds() callback 2013-09-19 18:38:28 +10:00
Andrew Tridgell f8e9d48a76 AP_InertialSensor: removed the flash_leds() callback 
AP_Notify now handles this
 2013-09-19 18:32:19 +10:00
Andrew Tridgell 7b3a674d66 AP_InertialSensor: added set_default_filter() method 2013-09-09 19:18:52 +10:00
Andrew Tridgell 396c4f30d2 AP_InertialSensor_PX4: don't set QUEUEDEPTH 
the default of 2 samples is fine
 2013-09-09 18:04:40 +10:00
Andrew Tridgell 8b80beadc4 PX4: make FMUv2 identify itself differently 
so we can tell which is which in logs
 2013-09-09 18:04:40 +10:00
Andrew Tridgell ff0f6bcd42 AP_InertialSensor: fixed example build 2013-09-07 21:03:59 +10:00
Andrew Tridgell 5caf2e0ea4 AP_InertialSensor: fixed example build 2013-08-30 13:01:39 +10:00
Andrew Tridgell 65a490c209 AP_InertialSensor: update for new notify API 2013-08-30 13:01:35 +10:00
Randy Mackay 5651bdbe3a INS: integrate AP_Notify 2013-08-30 13:01:35 +10:00
Andrew Tridgell e5ad9dbd15 AP_InertialSensor: switch PX4 driver to fixed time per sample model 
this makes the driver much simpler, and does away with the need for an
accumulate function
 2013-08-30 13:01:33 +10:00
Andrew Tridgell 38fe89d661 AP_InertialSensor: switch to non-averaging system for PX4 IMUs 
always use the latest value, based on a lowpass filter in the driver
 2013-08-30 13:01:33 +10:00
Andrew Tridgell 46c5d18585 AP_InertialSensor: disable averaging on FMUv2 
the new filter from Leonard means we shouldn't average values, and
instead just use the last value
 2013-08-30 13:01:33 +10:00
Julian Oes c3b27629ec AP_InertialSensor: run PX4 FMUv2 at 800Hz 
this gives much better noise suppression
 2013-08-30 13:01:33 +10:00
Randy Mackay effc829790 INS: relax accel offset check to 3.5 m/s/s 
One user, Dusty, has found that even with offsets of 3.1 m/s/s
successful alt hold and loiter are possible
 2013-07-13 10:43:07 +09:00
Randy Mackay 20ed00dcc9 AP_InertialSensor: relax accel offset sanity check 2013-06-25 14:19:42 +09:00
Andrew Tridgell c92069644d AP_InertialSensor: fixed indent-tabs-mode 2013-05-30 09:52:12 +10:00
Andrew Tridgell 807dbf9786 AP_InertialSensor: fixed a build warning 2013-05-24 11:21:42 +10:00
Andrew Tridgell 59b6118a1d AP_InertialSensor: fixed parameter markup 2013-05-21 17:02:13 +10:00
Andrew Tridgell fefbeacf86 AP_InertialSensor: use SEVERITY_USER_RESPONSE for accel cal messages 
thanks to the suggestion from Kevin
 2013-05-09 09:28:25 +10:00
Andrew Tridgell 8f57b72e3f AP_InserialSensor: fixed example build 2013-05-08 16:45:31 +10:00
Andrew Tridgell 2ddeaa7f4d AP_InertialSensor: show calibration offsets for success and failure 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2013-05-08 16:19:06 +10:00
Andrew Tridgell f3f4b7205c AP_InsertialSensor: added support for MAVLink user interaction 
allows APM to ask user to print enter to continue via MAVLink messages
during accel calibration
 2013-05-08 16:18:40 +10:00
Andrew Tridgell 99d21854f9 SITL: fixed drift rate limit in simulator 2013-05-04 15:16:35 +10:00
Randy Mackay 42bca90676 INS: add calibrated check 
Checks is the scaling vector has been updated.  Required for pre-arm
checks for ArduCopter
 2013-04-22 23:55:53 +09:00
Andrew Tridgell 17d7f1fbe5 AP_InertialSensor: make some interfaces const 2013-04-20 13:52:36 +10:00
Andrew Tridgell 76e20150e9 AP_InertialSensor: ensure parent class is initialised in instance classes 2013-04-12 14:30:35 +10:00
Randy Mackay 86fe79a662 INS: updated MPU6K_FILTER parameter description 2013-04-10 00:14:53 +09:00
Andrew Tridgell 8d992ae615 InertialSensor: added OilPan INS example 2013-04-08 07:07:25 +10:00
Randy Mackay af13f6795c INS: switch to global definition of GRAVITY_MSS 
saves 4 bytes of RAM
 2013-04-05 22:57:46 +09:00
Randy Mackay 777c6a308e AP_InertialNav: use shared GRAVITY_MSS constant 2013-04-05 11:48:41 +09:00
Michael Oborne 87292e0a4a Init hil accel with gravity 2013-03-31 16:38:48 +08:00
Randy Mackay 318a831b57 INS: set default filter to 20hz for APM2.x and PX4 2013-03-01 19:35:34 +09:00
Randy Mackay 963231a19b AHRS: fix example sketch to use roll/pitch trim 2013-02-19 18:56:09 +09:00
Randy Mackay 21de9f5f47 AP_InertialSensor: return roll and pitch trim angles 2013-02-19 12:45:44 +09:00
Andrew Tridgell a63275d284 AP_InertialSensor: expand register range in MPU6000 _dump_registers() 2013-02-13 19:33:40 +11:00
zlite 4800c57fb4 Fixed cosmetic typo in user display message 
Corrected "it's" to "its". Just one of those grammar things that drives me crazy ;-)
 2013-02-06 16:34:33 -08:00
Andrew Tridgell 1121254606 AP_InertialSensor: added filter frequency support to PX4 driver 2013-02-07 11:20:45 +11:00
Andrew Tridgell 5643c371b9 AP_InertialSensor: removed unused new_data_available() and temperature() APIs 2013-02-07 10:23:37 +11:00
Andrew Tridgell 7b1245937c AP_InertialSensor: always sample at 200Hz in MPU6000 
this changes the sampling to 200Hz regardless of requested rate, and
it is downsampled inside num_samples_available() using a shift. This
gives better noise resistance in ArduPlane.

This patch also makes it possible to update the filter frequency while
running, which is very useful for bench testing with a vibration
source
 2013-02-07 10:23:08 +11:00
Randy Mackay 6f5050a8b9 Copter: minor casting fixup for wp_distance 2013-01-27 11:27:43 +09:00
Randy Mackay bad81a5113 AP_InertialSensor_MPU6k: remove unnecessary check of sign when receiving fifo packet from dmp 2013-01-27 11:22:39 +09:00
Andrew Tridgell f60d657f72 AP_InertialSensor: added timer for accumulating samples for PX4 
this makes the driver much more tolerant of sketch timing errors
 2013-01-21 21:51:32 +11:00
Andrew Tridgell 3d0cb755d2 AP_InertialSensor: user a timer to drive data collection on PX4 
this reduces the chance of missing a sample if the main sketch is a
bit slow
 2013-01-21 19:44:01 +11:00
Andrew Tridgell 16d72ca160 AP_InertialSensor: update PX4 driver to use read() method 2013-01-20 22:13:20 +11:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles. 
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
 2013-01-16 13:52:01 +11:00
Andrew Tridgell d844a1ba3c AP_InertialSensor: fixed PX4 example build 2013-01-13 21:10:53 +11:00
Andrew Tridgell d7996acdf7 AP_InertialSensor: added set_board_orientation() method 2013-01-13 17:32:48 +11:00
Andrew Tridgell 6142eac4b4 AP_InertialSensor: simplify get_delta_time() API 
use a single float return rather than two APIs.

This also changes the MPU6k driver to match the new 2.9 behaviour of
using the MPU6k sample timing instead of micros()
 2013-01-11 21:17:21 +11:00
Andrew Tridgell 2fe4656a50 Merge pull request #4 from GaloisInc/master 
Thanks Pat!
 2013-01-10 17:24:59 -08:00
Pat Hickey 910e09fc96 AP_InertialSensor_MPU6000: fix sync/async semaphore usage with new scheduler 2013-01-10 14:12:19 -08:00
Andrew Tridgell dbad61816b AP_InertialSensor: only build Oilpan driver on APM1 2013-01-10 21:01:55 +11:00
James Bielman 8e38ef6567 MPU6000: Flip Y and Z axes for SMACCM_HAL. 
- The accelerometer is upside-down on the PX4FMU vs the APM2.
 2013-01-09 11:19:51 -08:00
James Bielman 1309b7332a MPU6000: Use signed addition when accumulating readings. 
- Fixes very erratic accel readings on the PX4 board.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell f48790a56e AP_InertialSensor: poll for new data in num_samples_available() 
this lowers the latency for new data
 2013-01-09 20:31:09 +11:00
Andrew Tridgell 4ab1cddd15 AP_InertialSensor: ensure we always have the SPI semaphore for MPU6k 2013-01-09 20:30:20 +11:00
Andrew Tridgell b39166b71a MPU6000: fixed minor timing bug 
if we miss a sample due to SPI contention we shouldn't update last
sample time
 2013-01-07 11:07:29 +11:00
Andrew Tridgell fd23f6bd33 InertialSensor: added PX4 example sketch 2013-01-04 14:26:14 +11:00
Andrew Tridgell ae09b31176 AP_InertialSensor: added PX4 gyro/accel driver 2013-01-04 14:25:57 +11:00
James Bielman d84ba8ef59 Use HAL suspend/resume timer procs rather than atomic. 
- Preparation for removing begin/end atomic.
 2013-01-03 17:33:13 -08:00
Pat Hickey d808c19c10 AP_InertialSensor_MPU6000: uses new semaphores 
* some refactoring to fix differences between timerprocess
  and non-timerprocess usage
 2013-01-03 13:48:07 -08:00
James Bielman acf05a29ee AP_InertialSensor_MPU6000: Poll status register if there is no data ready pin. 2013-01-03 13:48:06 -08:00
rmackay9 e594f18b75 AP_InertialSensor: added parameter descriptions 2013-01-02 16:32:43 +09:00
Andrew Tridgell 374af1cd14 build: change from Arduino.mk to apm.mk 2013-01-02 17:29:37 +11:00
Andrew Tridgell 3f6f0b6d79 Oilpan: removed reference to DESKTOP_BUILD 2013-01-02 15:39:41 +11:00
rmackay9 a76aec675a AP_InertialSensor: resolved compile warning re uninitialised variable 2013-01-02 09:18:03 +11:00
Andrew Tridgell 0adc4afcb5 InertialSensor: add reboot option in MPU6000 test 2012-12-27 21:29:00 +11:00
Andrew Tridgell 212728be34 InertialSensor: ensure MPU6000 is out of sleep mode before configuring 
the MPU6000 starts in sleep mode, and can take a while to wakeup
 2012-12-27 21:28:41 +11:00
Andrew Tridgell 122b8716a7 InertialSensor: added auto reset of MPU6000 on startup failure 
this works around the problem of the MPU6000 failing to come up on DTR
reset or warm reboot
 2012-12-24 07:17:03 +11:00
Andrew Tridgell 44ad850542 InertialSensor: latch the data ready pin high on new data 
this ensures we don't miss a sample due to another source of delay
 2012-12-23 17:46:36 +11:00
Andrew Tridgell fcb09c3993 InertialSensor: fixed example app for new syntax 2012-12-23 12:49:34 +11:00
Andrew Tridgell e2edad8a3f InertialSensor: fixed last sample time in MPU6000 
we lost this in the final work on the DTR bug
 2012-12-23 08:59:35 +11:00
Andrew Tridgell 1a53bc783c InertialSensor: poll data ready pin instead of an interrupt for MPU6k 2012-12-22 09:16:31 +11:00
Andrew Tridgell 9548e7e79e InertialSensor: simplify the data_ready interrupt handling 
this avoids using the defer process code, and fixes a nasty bug that
caused the APM to lockup on reset
 2012-12-21 20:01:19 +11:00
Andrew Tridgell f504e2ec67 InertialSensor: removed sample rate in example 
not needed any more
 2012-12-20 15:16:43 +11:00
Pat Hickey 6437bd3a08 AP_InertialSenor MPU6000 test: fixed for user interact changes 2012-12-20 14:53:23 +11:00
Pat Hickey 9055681b3a AP_InertialSensor: use AP_InertialSensor_UserInteract 
* permits polymorphic user interaction, so we can plug in a
  pure mavlink interface
 2012-12-20 14:53:23 +11:00
Pat Hickey a2cf47e769 AP_InertialSensor: start implementing UserInteract 
* untested implementation in terms of BetterStream
 2012-12-20 14:53:23 +11:00
Andrew Tridgell bada70d871 InertialSensor: fixed example build on 1280 2012-12-20 14:53:22 +11:00
Andrew Tridgell 3c0440b0b4 Math: use common degrees() and radians() functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell 7277d4934d AP_InertialSensor: move constructor into cpp 2012-12-20 14:53:22 +11:00
Andrew Tridgell b06e072c87 AP_InertialSensor: fixed example build 2012-12-20 14:52:36 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell 44f860e102 InertialSensor: fixed some compiler warnings 2012-12-20 14:52:35 +11:00
Pat Hickey b502732249 AP_InertialSensor: rewrite basic code for spi device transactions 
* I'm not touching that DMP stuff because I'm pretty convinced it should
  instead be deprecated
 2012-12-20 14:52:32 +11:00
Pat Hickey a4f41c1d29 AP_InertialSensor: MPU6000 uses scheduler panic 2012-12-20 14:52:31 +11:00
Andrew Tridgell 7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Andrew Tridgell 2c1682f310 InertialSensor: use AP_HAL progmem 2012-12-20 14:51:39 +11:00
Andrew Tridgell c064becf28 AP_InertialSensor: updates for new AP_Param API 2012-12-20 14:51:39 +11:00
Pat Hickey 475da4eca4 CONFIG_HAL_BOARD - test sketches fixed up, build all passes 2012-12-20 14:51:37 +11:00
Andrew Tridgell 38031edc9d AP_InertialSensor: removed spurious init() method 2012-12-20 14:51:36 +11:00
Andrew Tridgell c9a81d7de6 AP_InertialSensor: fixed sign of 16 bit SPI transfer 
this gets accels and gyros working again
 2012-12-20 14:51:36 +11:00
Pat Hickey dbcc4fc6a5 AP_InertialSensor: variable wibble 2012-12-20 14:51:36 +11:00
Pat Hickey 9aca19415a AP_InertialSensor: robust semaphores 2012-12-20 14:51:36 +11:00
Pat Hickey 1019fb45e7 AP_InertialSensor: remove sei in data interrupt handler 2012-12-20 14:51:36 +11:00
Pat Hickey a4f1f6a5db AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR 2012-12-20 14:51:28 +11:00
Pat Hickey 4acf2c8591 AP_InertialSensor: ported to AP_HAL 2012-12-20 14:51:26 +11:00
Pat Hickey 3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches 
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
 2012-12-20 14:51:19 +11:00
rmackay9 b4e5176e2a ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 2012-12-09 14:27:33 +09:00
rmackay9 8b5f66255e AP_InertialSensor: add comments to give credit for accel calibration method to Rolfe Schmidt 2012-12-05 09:35:55 +09:00
rmackay9 a92b7f3477 AP_InertialSensor: add comments to give credit for accel calibration method to Rolfe Schmidt 2012-12-05 09:20:31 +09:00
Andrew Tridgell 3b18c57691 AP_InertialSensor: removed axis getters for accel/gyro 
these were only being used in one place, and in that place were used
incorrectly!
 2012-12-04 09:11:55 +11:00
Andrew Tridgell 5e77119377 AP_InertialSensor: fixed stub driver to work correctly with sensors HIL 2012-12-03 23:27:21 +11:00
Andrew Tridgell b237c0583d AP_InertialSensor: Added INS_MPU6K_FILTER option 
this allows the user to select the MPU6000 filtering frequency
 2012-11-30 07:15:19 +11:00
Andrew Tridgell 4f868e04cc AP_InertialSensor: return the example sample count in Oilpan 2012-11-30 07:15:19 +11:00
Andrew Tridgell 089ae0f9f3 AP_InertialSensor: allow specification of sample rate in init() call 
this lets the caller not need to know the underlying sample rate. They
just ask for what rate updates happen. 

This also changes the MPU6k filtering to be less than half the sample
rate
 2012-11-30 07:15:18 +11:00
Andrew Tridgell 7ea18d5a61 AP_InertialSensor: fixed example build 2012-11-24 21:08:06 +11:00
rmackay9 74daf73c49 AP_InertialSensor: increase acceptable Z accel offset to be 3.0 G 
Note: Z offsets do tend to be larger than x and y offsets
 2012-11-23 00:34:42 +09:00
Andrew Tridgell 11141d0af0 INS: make it possible to do accel cal on a different serial port 2012-11-21 21:41:34 +11:00
Andrew Tridgell f843705da3 INS: switch to SREG = oldSREG pattern for interrupt mask/restore 2012-11-20 22:31:23 +11:00
Andrew Tridgell a7e537d6c0 INS: set the acceptable calibration error equal on all axes 2012-11-20 19:28:49 +11:00
Andrew Tridgell 40fc0feaf9 INS: show calibration values on failure 
this will help debug bad calibrations
 2012-11-20 19:28:15 +11:00
Andrew Tridgell 85e050f16c INS: get check for send_msg the right way around! 
I broke this in my previous commit
 2012-11-20 19:10:30 +11:00
Andrew Tridgell fd3993287d INS: disable accel calibration on the 1280 
this would put us well over 128k in sketch size
 2012-11-20 18:41:04 +11:00
Andrew Tridgell 9c811671f1 INS: make calibrate_accel() return a bool 
this will allow APM to auto set MANUAL_LEVEL to 1
 2012-11-20 18:32:27 +11:00
Andrew Tridgell 152c12c283 INS: fixed raw accel offset for APM1 
we now get reasonable offset values
 2012-11-20 18:32:27 +11:00
Andrew Tridgell 3776e6108f INS: use vector subtraction to make code clearer 2012-11-20 18:32:27 +11:00
rmackay9 8ccac5da3d AP_InertialSensor: correct typo to datasheet's filename 2012-11-20 00:37:42 +09:00
rmackay9 d9b4407e64 AP_InertialSensor: changes after review with Tridge. 
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
 2012-11-07 19:21:15 +09:00
rmackay9 49de46a548 AP_InertialSensor: merge in calibration features from IMU library 
add gauss-newton method of accelerometer calibration
 2012-11-07 19:20:27 +09:00
rmackay9 8c6fd340d7 AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 921ab3fe12 ArduCopter: bug fix to DMP initialisation (it was freezing due to SPI bus conflicts) 2012-09-28 18:34:23 +09:00
Andrew Tridgell 7e544e8ead MPU6k: save 72 bytes of memory 
the buffer can be on the stack
 2012-09-18 13:58:50 +10:00
rmackay9 9f1033dc42 AP_InertialSensor_Stub: added num_samples_available method to fix HIL build 2012-09-10 11:38:13 +09:00
rmackay9 130f3b0030 AP_InertialSensor_MPU6000: move _last_sample_time_micros to capture time data_interrupt was called 2012-09-10 11:38:08 +09:00
rmackay9 7a265dbf61 AP_InertialSensor: use AP_TimerProcess's queue_process to run read from MPU6000 after any currently running processes complete 2012-09-10 11:38:03 +09:00
rmackay9 0a6219695b AP_InertialSensor: changed read of sensor from MPU6000 to happen immediately 
This reduces the delay between when data arrives and when it is used
by up to 1ms.

Added num_samples_available method to all InertialSensors to allow
main loop timing to be synced with sensors.
 2012-09-10 11:37:33 +09:00
rmackay9 c965963d7b AP_InertialSensor_MPU6000: bug fix. DMP was being enabled by default so although the results were not being used, this caused a delay in the main loop 2012-08-28 17:02:07 +09:00
uncrustify ad51ac5e11 uncrustify libraries/AP_InertialSensor/AP_InertialSensor_MPU6000.h 2012-08-21 19:03:14 -07:00
uncrustify 323ab9acf4 uncrustify libraries/AP_InertialSensor/AP_InertialSensor_Oilpan.h 2012-08-21 19:03:14 -07:00
uncrustify 8e5a031987 uncrustify libraries/AP_InertialSensor/AP_InertialSensor_Stub.h 2012-08-21 19:03:14 -07:00
uncrustify ac3960b3e7 uncrustify libraries/AP_InertialSensor/AP_InertialSensor.h 2012-08-21 19:03:14 -07:00
uncrustify e6c2616769 uncrustify libraries/AP_InertialSensor/AP_InertialSensor_MPU6000.cpp 2012-08-21 19:03:14 -07:00
uncrustify 77729b847f uncrustify libraries/AP_InertialSensor/AP_InertialSensor_Oilpan.cpp 2012-08-21 19:03:14 -07:00
uncrustify 0c322fb18a uncrustify libraries/AP_InertialSensor/AP_InertialSensor_Stub.cpp 2012-08-21 19:03:14 -07:00
uncrustify 25eaeff6a8 uncrustify libraries/AP_InertialSensor/examples/MPU6000/MPU6000.pde 2012-08-21 19:03:14 -07:00
Andrew Tridgell 0763bbd1af MPU6000: fixed some build warnings 2012-08-09 16:19:21 +10:00
Andrew Tridgell 518d6365ff AP_Param: update remaining libraries for new constructor syntax 2012-08-08 12:11:57 +10:00
rmackay9 5077674043 AP_InertialSensor_MPU6000: another attempt at fixing the SITL build 2012-07-28 17:19:19 +09:00
rmackay9 7683e9d870 AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully) 
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
 2012-07-28 16:33:04 +09:00
rmackay9 48074f4766 AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning 2012-07-28 15:22:37 +09:00
rmackay9 6cd0918134 AP_InertialSensor: methods added to access DMP functionality 2012-07-28 14:14:43 +09:00
Jason Short c9d3ab5413 Oilpan ADC parameters added 
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
 2012-07-18 22:57:11 -07:00
Andrew Tridgell acc6adf6e9 MPU6k: removed an unused variable 2012-06-29 21:54:09 +10:00
Craig Elder 69bf5700cd IMU: expose IMU_PRODUCT_ID as EEPROM Variable 
this will allow us to log the Product ID in tlogs
 2012-05-09 18:30:36 -07:00
Craig Elder 4a1d8b0875 AP_InertialSensor: Return product ID from sensor initialization 
this exposes the product ID to the IMU Layer
 2012-05-09 18:30:36 -07:00
Craig Elder ed99940bee MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D 
Rev C have non standard scaling factor that is 1/2 of the data sheet
Rev D chips conform to the specification
 2012-05-09 18:30:35 -07:00
Andrew Tridgell 2dd655d87d MPU6k: added suspend/resume on init 2012-05-01 12:06:54 +10:00
Andrew Tridgell b02ca58901 InertialSensor: fixed HIL build 2012-03-10 10:34:34 +11:00
Andrew Tridgell 9296ac494d AP_InertialSensor: added a get_gyro_drift_rate() interface 
this returns the expected max drift rate for the particular type of
gyro being used
 2012-03-10 10:34:33 +11:00
Andrew Tridgell 3e960f8ef9 InertionSensor: update for new Ch6() interface 2012-03-10 10:34:32 +11:00
Andrew Tridgell a9dea35310 AP_InertialSensor: added new_data_available() interface 2012-03-10 10:34:28 +11:00
Randy Mackay ed19c25a97 Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h". 
Modified FastSerial's write function to return size_t (number of bytes written).
 2012-01-28 12:25:47 +09:00
Andrew Tridgell e1c9c063a5 MPU6k: don't init the Wire library 
we don't use Wire any more
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 6ca613337b MPU6000: protect the driver from double initialisation 
initialising twice can lockup the driver
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 18d26dc74e MPU6000: minor fixes 
the hardware functions should be private, and cs_pin should be uint8_t
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 04daeab7c0 MPU6000: change to 98Hz low pass filter 
based on recommendation from Pat
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 10ca54ef8f MPU6000: use data ready interrupt to prevent stale data 
We listen for a data ready interrupt and only read new data in read()
if there is new data
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 760aa62c75 fixed the MPU6000 test sketch 2011-12-26 19:17:11 +11:00
Andrew Tridgell b72f9c2e9f added MPU6000 test sketch 
this doesn't work yet - Pat, any idea why?
 2011-12-25 12:03:39 +11:00
Andrew Tridgell f97b405b56 MPU6k: update driver for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell bc9e943969 rollover is not a bug 
subtracting unsigned numbers does the right thing
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 97f8d21c1b added code format markers to AP_InertialSensor library 2011-12-21 23:31:38 +11:00
Andrew Tridgell d442bad413 Revert "ADC: added an enable_channel() API" 
This reverts commit dafeac01d8f14162600cf821404ba4072dcae14d.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 9591317dbc ADC: added an enable_channel() API 
enable_channel() must be used before the Ch6() method is called to
enable gathering of data on the required channels
 2011-12-16 20:09:40 +11:00
Pat Hickey f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Andrew Tridgell 41caa949ca fixed InertialSensor stub build 2011-11-25 20:00:18 -08:00
Pat Hickey d2a0bd35f4 hil-sensors: added stub libraries for InertialSensor and PeriodicProcess 
* Also added dummy ivar to APM_BMP085_hil
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 8245835ea3 desktop: make AP_InertialSensor pure virtual 
fixed a link error in Desktop build

thanks to Pat for the C++ foo
 2011-11-25 20:00:17 -08:00
Pat Hickey 82b48784ef purple: added AP_InertialSensor library 
this abstracts the way of getting inertial sensor (gyro and
accelerometer) data for the APM1 and purple hardware. The Oilpan code
is based closely on the old APM1 code
 2011-11-25 20:00:16 -08:00