Peter Barker
d489d9a585
Plane: compass init never fails
2019-03-13 13:06:50 +11:00
Peter Barker
ca7566fff9
Plane: use enum class for ArmingMethod and ArmingRequired
2019-03-12 19:48:14 +11:00
Peter Barker
cbb0bfb809
Plane: is_flying_vtol: if spool mode is shut down we are not flying
...
The subsequent check for get_throttle passes if you switch from QHOVER
to MANUAL on the ground while armed. get_throttle returns > 0.01 - but
the motors are shut down so no output occurs.
2019-03-12 10:21:11 +11:00
Peter Barker
cf45b54070
Plane: quadplane use prearm checks from Attitude and Position controllers
2019-03-12 10:14:14 +11:00
Mark Whitehorn
f7bf10fcfc
ArduPlane: add rudder to tailsitter gain scaling
2019-03-12 10:12:23 +11:00
Mark Whitehorn
4a6b97828f
ArduPlane: add tailsitter input type TAILSITTER_INPUT_BF_ROLL
2019-03-06 15:48:51 +11:00
Mark Whitehorn
01d6f1d932
ArduPlane: add body-frame yaw mode for tailsitters
2019-03-06 15:48:51 +11:00
IamPete1
872c3df45c
Plane: tailsitter pull in copter ouputs from AP_motors
2019-03-06 14:46:39 +11:00
Peter Barker
bd444d97dc
Plane: move sending of airspeed_autocal into AP_AirSpeed
2019-03-06 11:32:52 +11:00
Mark Whitehorn
6e4a2b97f9
ArduPlane:add subclass for copter tailsitters
...
cleanup and add tailsit_motmx
add constexpr and motor mask check
add support for tricopter tailsitter
don't call output_motor_mask unless armed
fix whitespace
2019-03-06 07:53:46 +09:00
Peter Barker
94899bd2ed
Plane: move sending of send_pid_tuning up
2019-03-05 10:41:56 +11:00
Mark Whitehorn
61aff344d3
ArduPlane: add high-speed Qmode tailsitter gain scaling with support for airspeed sensor
2019-03-05 10:27:42 +11:00
Mark Whitehorn
487ad7a90f
Plane: add QACRO mode for quadplanes
...
use acro_r/p/y_rate params in qacro
port ACRO throttle handling from copter
handle non-tailsitter controls
2019-03-05 10:13:20 +11:00
Peter Barker
a451380d61
Plane: avoid int32_t<->float conversions
2019-03-01 12:09:58 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
f430fd14f6
Plane: replace location_offset() and get_distance() function calls with Location object member function calls
...
This allows removing duplicated code
2019-02-28 11:44:09 +11:00
Andrew Tridgell
cd1f21b806
Plane: removed some px4 specific code and docs
2019-02-27 20:32:37 +11:00
IamPete1
f24c6785f2
Plane: add E-stop
2019-02-27 08:51:24 +09:00
Andrew Tridgell
136e10a781
Plane: handle VTOL landing with incorrect height
...
if landing above expected height then run landing detector to allow a
switch from LAND_DESCEND to LAND_FINAL
this prevents the plane sitting on the ground until the battery runs
out
2019-02-26 11:12:58 +11:00
Peter Barker
dea75a87fd
Plane: AHRS set_orientation renamed to update_orientation
2019-02-26 10:28:09 +11:00
Michael du Breuil
b290148ed0
Plane: Don't overwrite the quadplane loiter relax
2019-02-23 11:08:21 +11:00
Andrew Tridgell
a278a152fc
Plane: fixed throttle nudge
...
broken by recent radio input changes
Thanks to Michael for noticing!
2019-02-22 18:41:34 +11:00
Michael du Breuil
c15983c690
Plane: prevent loss of control when Q_ENABLE is set while flying
...
Also rename check_throttle_suppression
2019-02-21 21:38:03 -07:00
Andrew Tridgell
c290b1f3b5
Plane: fixed servo jitter due to airspeed estimate from throttle
...
when we have no other airspeed source and we are armed we get airspeed
from throttle. the default setting of k_throttle in the radio code
caused an oscillation of the value used in the airspeed estimate, each
time a RC frame came in.
2019-02-22 14:42:17 +11:00
Michael du Breuil
25a2c77782
Plane: Fix not logging quadplane control, and over logging attitude control
2019-02-22 11:59:26 +11:00
Andrew Tridgell
d7abf27ec2
Plane: fixed servo jitter due to airspeed estimate from throttle
...
when we have no other airspeed source and we are armed we get airspeed
from throttle. the default setting of k_throttle in the radio code
caused an oscillation of the value used in the airspeed estimate, each
time a RC frame came in.
2019-02-22 10:27:36 +11:00
Peter Barker
c24759d3df
Plane: use abs not fabsf for integers
2019-02-20 19:23:54 +11:00
Peter Barker
cdde2b7d64
Plane: Rally no longer takes ahrs in constructor
2019-02-20 18:03:38 +11:00
Michael du Breuil
5134af2298
Plane: Manage quadplane throttle during RC failsafe
2019-02-19 20:41:05 -07:00
Peter Barker
1ab80ddce0
Plane: move update_sensor_flags to GCS_Plane.cpp
2019-02-20 11:57:00 +11:00
Peter Barker
34853fb1bf
Plane: move update_sensor_status_flags into GCS subclasses
2019-02-19 14:09:59 +11:00
Peter Barker
a3c13fc028
Plane: move sensor flags to be a GCS thing rather than a GCS_MAVLINK thing
2019-02-19 14:09:59 +11:00
Peter Barker
33541dcbf6
Plane: GCS_MAVLink takes care of mavlink capabilities
2019-02-19 13:14:52 +11:00
Peter Barker
5690a0ea4a
Plane: move try_send_message of nav_controller_output up
2019-02-19 10:08:00 +11:00
Mark Whitehorn
95b3a5bacd
ArduPlane: implement hover throttle learning for quadplanes
...
disable by default
check quadplane.enable in update_hover_learn
2019-02-16 19:04:13 -08:00
Peter Barker
0858847294
Plane: remove redundant send_ekf_origin
2019-02-15 08:28:45 +11:00
Peter Barker
0c880a4c3e
Plane: remove redundant home-setting sanity checks
2019-02-15 08:28:45 +11:00
Peter Barker
b6bf8d8368
Plane: make setting of home boolean in preparation for sanity checks
2019-02-15 08:28:45 +11:00
Peter Barker
5a19f447a7
Plane: devo telemetry no long requires singleton classes to be passed in
2019-02-13 19:24:07 +00:00
Peter Barker
4f249db8bc
Plane: move responsibility for parachute deployment up
2019-02-13 09:25:27 +09:00
Peter Barker
30671a6743
Plane: move handling of command-int MAV_CMD_DO_SET_HOME up
...
Plane: eliminate set_home shim around AP_AHRS::set_home
2019-02-13 09:42:26 +11:00
Peter Barker
cfb3dfc4e5
Plane: AP_Frsky_Telem uses singletons
2019-02-12 17:53:23 +00:00
Andrew Tridgell
0089e98bb6
Plane: call AHRS resetHeightDatum() on baro reset
...
this prevents the AMSL estimate from the EKF going off badly if we
disarm at a high altitude
2019-02-12 12:17:02 +11:00
Peter Barker
3bba981a00
Plane: dataflash always emits rally points at startup
2019-02-12 11:48:55 +11:00
Mark Whitehorn
b9f3118374
Plane: allow changing Q_TRIM_PITCH in flight
...
change float comparison to is_equal
2019-02-12 09:42:19 +11:00
Tom Pittenger
c422a21f55
Plane: ICE to use ahrs singleton
2019-02-05 15:34:08 +11:00
Peter Barker
6e1dc79b75
Plane: move handling of RC_CHANNELS_OVERRIDE up
2019-02-05 13:59:21 +11:00
Peter Barker
b48cb1e367
Plane: move sending of sys_status message up
2019-02-05 11:07:39 +11:00
Michael du Breuil
df1632054e
Plane: Update throttle mix
2019-02-05 11:05:54 +11:00
Andrew Tridgell
5dbf603450
Plane: separate out slew limit logic for left/right throttles
2019-02-03 05:06:37 -08:00
Andrew Tridgell
28cf9d2f24
Plane: allow rudder at zero throttle
...
if rudder disarming is disabled
2019-02-03 05:02:07 -08:00
Randy Mackay
4d5e13f1d4
Plane: : integrate AC_WPNav::get_speed rename to get_default_speed
2019-01-31 19:34:32 +09:00
Peter Barker
a697d5f6fe
Plane: AC_Fence is included for all vehicles
2019-01-31 13:44:29 +09:00
Peter Barker
11dd83e23a
Plane: remove rally argument from Write_Rally - use singleton
2019-01-31 09:51:25 +09:00
Peter Barker
68b9e64077
Plane: remove old, unfulfilled method declarations
2019-01-30 09:03:52 +09:00
Tom Pittenger
05bf329d81
Plane: ignore battery failsafe during landing
...
fixes https://github.com/ArduPilot/ardupilot/issues/10320
2019-01-23 14:16:27 -07:00
Nathan E
4d7fc66657
Update parameters.cpp per magicrub comments
2019-01-23 09:24:18 -07:00
Nathan E
448d19ddbb
Update ArduPlane/Parameters.cpp
2019-01-23 09:24:18 -07:00
Mark Whitehorn
5c81a78c9c
Plane: tailsitter forward transition bugfix
2019-01-22 12:55:47 +11:00
Peter Barker
40856fef56
Plane: remove vestiges of old PX4_MIXER code
2019-01-19 19:31:03 +11:00
Peter Barker
6fc76a32af
GLOBAL: use AP::logger() and strip redundant Log_ from methods
2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
99a93112b4
Plane: remove PX4-specific code that disables overrides on reboot
2019-01-18 17:32:02 +11:00
Andrew Tridgell
bc438676ab
Plane: fix tailsitter logged attitude targets
2019-01-18 14:16:55 +11:00
Peter Barker
129762d3af
Plane: APM_Control uses DataFlash singleton, stop passing it
2019-01-18 14:14:22 +11:00
Francisco Ferreira
d0fa931b09
Plane: add KDECAN to included libraries
2019-01-18 00:57:32 +00:00
Peter Barker
76b31f315a
Plane: log_terrain_data no longer takes a DataFlash argument
2019-01-18 11:17:40 +11:00
Peter Barker
a35fbb4a11
Plane: Log_Write_SIMSTATE no longer takes dataflash pointer
2019-01-18 11:16:54 +11:00
Peter Barker
cb92fba701
Plane: remove PX4 FWVersion info
2019-01-16 11:47:55 +11:00
Peter Barker
b258e89a2d
Plane: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Peter Barker
acafb0f3c1
Plane: adjust for location flags being moved out of union
2019-01-16 11:45:29 +11:00
Randy Mackay
2650b1fe93
Plane: desired-ground-idle replaces spin-when-armed
2019-01-15 11:41:44 +09:00
Michael du Breuil
843c92ced5
Plane: Remove some redundant code/state resets
2019-01-15 10:45:50 +11:00
IamPete1
9c0ac5899f
Plane: pass rudder diffential thrust to AP_motors
2019-01-15 10:19:19 +11:00
IamPete1
eaed0a2d47
Plane: make rudder differnal thrust global
2019-01-15 10:19:19 +11:00
Andrew Tridgell
f35cebcca4
Plane: fixed EKF yaw reset
...
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective
thanks to Leonard for noticing the bug!
2019-01-14 08:32:17 +11:00
Andrew Tridgell
53a1d98b68
Plane: fixed VTOL takeoff to ignore lat/lon in mission
...
we should always takeoff vertically
2019-01-11 13:48:45 +11:00
Peter Barker
5c90a2dab2
Plane: Terrain uses rally singleton
2019-01-09 10:14:16 +11:00
Michael du Breuil
d6cac4b52a
Plane: Add a failure timer for quadplane forward transitions
...
Falls over to QLAND if we fail to transition
2019-01-08 10:52:12 +11:00
Michael du Breuil
64e152fbc0
Plane: Remove unneeded GCS rally override
2019-01-08 10:39:50 +11:00
Michael du Breuil
ae6dc01cd5
Plane: Reset all storage when format version is incorrect
2019-01-08 10:35:37 +11:00
murata
02d692f32e
Plane: Delete NuttX version processing
2019-01-08 10:06:20 +11:00
Andrew Tridgell
97e54f6359
Plane: allow mavlink when in sensor error
2019-01-04 19:17:31 +11:00
Michael du Breuil
09f6ec8a00
Plane: Remove unneeded AP_Buffer include
2018-12-31 11:41:43 +09:00
Michael du Breuil
e6bc44f471
Plane: Fix cases where quadplane level transition was not applied
2018-12-31 10:36:32 +11:00
Michael du Breuil
69c87c6c4a
Plane: Disallow arming if quadplane has been requested but isn't available
2018-12-28 18:09:21 +11:00
IamPete1
9c2db806f3
Plane: add units to Q_VFWD_ALT
2018-12-28 16:15:41 +11:00
Andrew Tridgell
7939f3488b
Plane: log PIDs during QAUTOTUNE twitch
2018-12-22 15:10:23 +11:00
Andrew Tridgell
088442880e
build: removed makefile build system
2018-12-22 11:06:59 +11:00
Andrew Tridgell
9117dcc54b
Plane: don't log QTUN when VTOL not active
2018-12-21 22:17:52 +11:00
Andrew Tridgell
d3afc9424a
Plane: make QTUN logging match copter logging
2018-12-21 22:17:52 +11:00
Andrew Tridgell
1013eddfce
Plane: use AHRS_View for RATE logging
2018-12-21 22:17:52 +11:00
IamPete1
1a98989ac6
Tailsitter: move mixer to AP_motors
2018-12-21 11:19:18 +09:00
Michael du Breuil
a78bce32c0
Plane: Allow users to force target airspeed in cruise or fbwb
2018-12-18 22:36:55 -08:00
Peter Barker
d133f998c5
Plane: split SIMSTATE, AHRS2 and AHRS3 onto their own ap_message ids
2018-12-19 13:19:23 +11:00
Peter Barker
54022b6b57
Plane: split DISTANCE_SENSOR onto its own ap_message id
2018-12-19 07:24:37 +11:00
Randy Mackay
a96c1566ec
Plane: fix quadplane pos control param docs
2018-12-18 12:01:07 +00:00
Peter Barker
17f244ce9f
Plane: try_send_message caller checks telemetry_delayed
2018-12-18 14:25:56 +11:00
Peter Barker
5137c0ab5f
Plane: split SYS_STATUS and POWER_STATUS onto separate ap_messages
2018-12-18 14:05:20 +11:00
Michael du Breuil
47dfafd670
Plane: Ensure that the plane is an appropriate distance out before starting the approach
2018-12-18 10:11:22 +11:00
Michael du Breuil
05484c3987
Plane: Support a different landing airspeed for fw quadplane landings
2018-12-18 10:11:22 +11:00
Michael du Breuil
1a45755ffd
Plane: Support a different landing radius for quadplane fw approach
2018-12-18 10:11:22 +11:00
Michael du Breuil
f1154a6e7c
Plane: Pass the mission command around rather then fetching it
2018-12-18 10:11:22 +11:00
Michael du Breuil
42e67d5849
Plane: Whitespace fixes
2018-12-18 10:11:22 +11:00
Michael du Breuil
e8885ee1a5
Plane: Fly a planned abort sequence if available
2018-12-15 09:03:25 +11:00
Nikhil Upadhye
d1e93bae83
Plane: adding new mode QAUTOTUNE
...
copter like autotune support for quadplanes and tailsitter in VTOL mode.
cleanup
2018-12-14 16:33:11 +11:00
Peter Barker
9d323b4b90
Plane: move accept_packet to GCS_MAVLink base class
2018-12-14 12:44:31 +11:00
Peter Barker
56675851b6
Plane: DataFlash uses AP_Mission singleton
2018-12-13 14:45:30 +09:00
Peter Barker
2978da5ecd
Plane: GCS_MAVLink now uses Mission singleton
2018-12-13 10:52:52 +09:00
Peter Barker
bcf68a9103
Plane: split MSG_SCALED_PRESSURE into three separate messages
2018-12-12 21:36:01 +11:00
Peter Barker
a263364959
Plane: GCS_MAVLink uses dataflash singleton
2018-12-11 08:43:47 +09:00
Michael du Breuil
f3a843ebf7
Plane: Fix a comma in bitmask that was breaking emitters
2018-12-11 10:24:40 +11:00
Peter Barker
153228bef5
Plane: call GCS update functions at quadcopter main loop rate
2018-12-10 12:52:41 +09:00
Peter Barker
18d4df8d4f
Plane: split MSG_RAW_IMU1 into per-IMU ap_messages
2018-12-10 12:52:41 +09:00
Peter Barker
67042d39d1
Plane: send both SYS_STATUS or POWER_STATUS or neither
2018-12-10 12:52:41 +09:00
Peter Barker
d1727d26a1
Plane: rename send_extended_status1 to send_sys_status
2018-12-10 12:52:41 +09:00
Peter Barker
7f5c0db949
Plane: adjust for new update entry points into GCS
2018-12-10 12:52:41 +09:00
Peter Barker
1ca67df663
Plane: add parameter stream to list-of-all-streams
2018-12-10 12:52:41 +09:00
Andrew Tridgell
fa04c2d094
Plane: prevent jitter on surfaces due to speed scaling
...
when disarmed the k_throttle output can oscillate due to stage in the
loop we are at, even though actual output is zero. This can cause
jitter in the speed scaling, which causes surface movement
To fix, don't use k_throttle value when disarmed
2018-12-06 17:44:11 +11:00
Randy Mackay
71708ee4ea
Plane: quadplane uses set_defaults_from_table
2018-12-06 12:23:41 +09:00
Peter Barker
edd4f6d14d
Plane: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO
2018-12-04 18:01:38 +11:00
Peter Barker
de479032ba
Plane: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send
2018-12-04 17:45:32 +11:00
Andrew Tridgell
6c7af3830b
Plane: apply throttle slew to dual-motor setups
...
thanks to Alex for noticing this issue
2018-12-04 09:08:31 +11:00
IamPete1
c6e70c0454
Plane: add roll limit for tailsitters
...
Quadplane: add tailsitter pitch params
2018-12-01 09:40:07 +11:00
Andrew Tridgell
b6519c88a5
Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors
...
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
2018-11-30 18:17:42 +11:00
Leonard Hall
0943ace7a9
Plane: Zero Yaw correction during transition
...
and relax attitude controller when not using lift motors.
2018-11-30 18:16:29 +11:00
Andrew Tridgell
c081ce9adb
Plane: don't relax attitude controllers for tailsitters
...
this fixes an issue with testing control movement when disarmed
2018-11-30 13:01:53 +11:00
Peter Barker
ba3a369651
Plane: remove update_events scheduler shim
2018-11-27 10:07:13 +11:00
Michael du Breuil
1e220d3d37
Plane: Add support for mode change to QLand as a failsafe
2018-11-24 14:37:04 -08:00
Peter Barker
d4e88bc6ba
Plane: remove pointless wrappers around RC_Channels functions
2018-11-23 10:56:17 +11:00
Peter Barker
03b71e1123
Plane: remove pointless wrappers around gcs functions
2018-11-23 10:56:17 +11:00
Andrew Tridgell
4d8fbdfcfd
Plane: fixed spoiler left rudder order
...
thanks to @jgilbertfpv for noticing
2018-11-20 20:10:00 +11:00
Andrew Tridgell
1d00d26b9e
Plane: added parameters for crow flaps
...
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
jgilbertfpv
4d6547c533
Plane: added crow brakes and diff. spoilers
...
added crow braking via flap channel to differential spoilers and
reversed dspoiler outputs because having the inner elevon go up and
outer go down causes tip stall. now inner goes down, outer goes
up. still could use a percentage adjustment to change how much throw
each surface gets when using flap input.
2018-11-20 10:00:38 +11:00
Andrew Tridgell
987b556299
Plane: disable crash detection if no GPS and no airspeed
2018-11-19 07:32:20 +11:00
Andrew Tridgell
b660022b20
Plane: handle long GPS loss in crash detector
...
fixes issue #9349
2018-11-19 07:32:20 +11:00
DOMINATOR\Eugene
802ae94e2c
ArduPlane: move airspeed update to library
2018-11-17 07:52:42 +11:00
Andrew Tridgell
03f1deca9f
Plane: support REVERSE_THROTTLE rc option
...
this provides a more convenient way to setup for reverse throttle
2018-11-16 08:33:35 +11:00
Andrew Tridgell
da69bf3391
Plane: added an abstraction for reverse thrust
...
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Peter Barker
a5c34f6172
Plane: OpticalFlow takes care of its own logging
2018-11-13 10:40:23 +11:00
Peter Barker
e53a009a35
Plane: do not pass ahrs to opticalflow constructor
2018-11-13 10:40:23 +11:00
Peter Barker
12c67ecaab
Plane: move sending of optical flow status up to base class
2018-11-13 10:40:23 +11:00
Andrew Tridgell
c59b2c156a
Plane: fixes for Q_TRIM_PITCH
...
improved documentation and variable names
2018-11-12 17:05:04 +11:00
IamPete1
5a7bd61e8c
Quadplane: add trim params
2018-11-12 17:05:04 +11:00
Andrew Tridgell
85a1f9e40d
Plane: added ACCZ pid tuning
2018-11-12 15:36:39 +11:00
Andrew Tridgell
432d786f82
Plane: pass height to landing gear update
2018-11-10 21:24:19 +11:00
Michael du Breuil
8ce0460daf
Plane: Remove old parameter conversion
2018-11-10 18:58:54 +11:00
Michael du Breuil
8e906e0ba0
Plane: Add support for a loiter to alt approach to VTOL landing
2018-11-10 18:58:54 +11:00
Andrew Tridgell
f89c770c46
Plane: moved LANDING_GEAR to common RC_Channel
2018-11-09 14:35:14 +11:00
Eugene Shamaev
01178a75e9
Plane: added landing gear support
2018-11-09 14:35:14 +11:00
Peter Barker
818bb8d56d
Plane: don't pass ahrs to terrain constructor
2018-11-08 20:59:45 +11:00
Peter Barker
4b68ca79dc
Plane: stop passing ahrs to Mission constructor
2018-11-08 10:01:16 +09:00
Andrew Tridgell
f2b8067023
Plane: pass manual_rc_mask to iocmu mixer
2018-11-07 07:35:45 +11:00
Andrew Tridgell
c3d434bc35
Plane: pass mixing gain to iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
d5c29fc57e
Plane: use IOMCU mixing if available
2018-11-07 07:35:45 +11:00
Michael du Breuil
1c54fa0230
Plane: Remove old battery conversion that conflicts with new monitor
2018-11-06 10:18:39 +09:00
Michael du Breuil
d9e02403e1
Plane: Fix battery failsafe parameter conversion
2018-11-06 10:18:39 +09:00
Michael du Breuil
9e1b0de6b7
Plane: Make capability init consistent
2018-11-05 14:04:36 +11:00
Andrew Tridgell
1c162c8b64
Plane: ensure speed scaling covers full aircraft speed range
...
this is important for very fast or very slow aircraft
2018-11-02 15:30:50 +11:00
Andrew Tridgell
5ce418b4ea
Plane: added FLIGHT_OPTIONS bit for disabling pitch up check in takeoff
...
some takeoff procedures use high pitch angles
2018-10-31 18:53:36 +11:00
Andrew Tridgell
a00e06ea13
Plane: added TKOFF_ACCEL_CNT for multi-shake to start
...
this allows you to setup shake to start with a lower accel threshold,
but with multiple fwd/back movements needed.
This implements https://github.com/ArduPilot/ardupilot/issues/2221
2018-10-31 18:53:36 +11:00
Peter Barker
27b444f4e8
Plane: move handling of gimbal messages up
...
Plane: move handling of mav_cmd_do_mount_control up
Plane: move handling of deprecated mount messages up
Plane: move handling of command_do_set_roi up
Plane: mount no longer takes ahrs in constructor
2018-10-30 17:19:14 +11:00
Peter Barker
7890fbeaa1
Plane: let AP_Mission handle common camera commands
2018-10-30 15:37:18 +11:00
Peter Barker
1653b34b2b
Plane: move servorelayevents mission handling into AP_Mission
2018-10-30 15:37:18 +11:00
Peter Barker
dc6a03f5e0
Plane: mission library handles gripper
2018-10-30 15:37:18 +11:00
Peter Barker
3b49e46c36
Plane: AC_Avoid is built on all vehicles
2018-10-30 12:10:42 +11:00
Andrew Tridgell
009786a338
Plane: small update to failsafe documentation
2018-10-18 11:38:07 +11:00
Peter Barker
9e4e17c797
Plane: leave AHRS to log and notify home changes
2018-10-16 10:55:13 +11:00
Peter Barker
4e3e39a3e8
Plane: make libraries get EKF control limits themselves
2018-10-09 10:47:38 +11:00
Michael du Breuil
3aed07a83a
Plane: Create a scripting object
2018-10-09 10:08:52 +11:00
Michael du Breuil
02d37d43d2
Plane: Disallow climbs during TRANSITION_AIRSPEED_WAIT
2018-10-02 09:35:47 +10:00
Michael du Breuil
b945970914
Plane: Fix FLIGHT_OPTIONS bitmask doc
2018-09-27 17:20:49 +01:00
Michael du Breuil
b2ef6b901e
Plane: Cope with AC_PosControl renaming
2018-09-20 15:15:45 -07:00
Michael du Breuil
b6efc8a20b
Plane: reduce some copy pasted code
2018-09-20 13:47:21 -07:00
Andrew Tridgell
adf318ce06
Plane: release notes for 3.9.2beta3
2018-09-20 07:17:34 +10:00
Leonard Hall
13c27e0eb8
Plane: Missing Loiter Init on accel
2018-09-19 17:29:55 +09:00
Andrew Tridgell
0e0d847f7f
Plane: updated release notes for 3.9.2beta2
2018-09-15 16:11:04 +10:00
Andrew Tridgell
5136b90d27
Plane: do attitude relax after 100ms
2018-09-15 11:00:29 +10:00
Leonard Hall
e50414d8b9
Plane: Log VTOL targets in ATT message in VTOL mode
2018-09-15 11:00:29 +10:00
Leonard Hall
7372a7b5f9
QuadPlane: Remove repeat I term reset
2018-09-15 11:00:29 +10:00
Andrew Tridgell
ef154cf3fa
Plane: fixed relaxing of attitude controller on transition
...
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
2018-09-15 11:00:29 +10:00
Andrew Tridgell
2215913b02
Plane: added speed scaling reduction for Q modes
...
when in a Q mode reduce surface movements at low airspeed, in case we
have the wind from behind us. This prevents the control surfaces from
causing instability
2018-09-14 19:28:29 +10:00
Andrew Tridgell
2d3942222b
Plane: handle reverse thrust in AFS failsafe
...
and zero differential thrust
2018-09-13 08:15:02 +10:00
Andrew Tridgell
455f15a157
Plane: handle twin motor planes for AFS failsafe
2018-09-13 08:15:02 +10:00
Andrew Tridgell
6707c8af36
Plane: update release notes for 3.9.2beta1
2018-09-12 16:33:49 +10:00
Andrew Tridgell
aa1548e404
Plane: fixed throttle when terminated
...
thanks to Michael Thomas for reporting this
2018-09-12 14:13:33 +10:00
Randy Mackay
d6a102234e
Plane: rename rudder_arming to get_rudder_arming_type
2018-09-11 19:34:39 +10:00
Randy Mackay
b61b25e5bf
Plane: minor format fix to Parmeters.cpp
2018-09-11 19:34:39 +10:00
Randy Mackay
96d494c2e8
Plane: use parent AP_Arming rudder value
2018-09-11 19:34:39 +10:00
Michael du Breuil
f150cae75a
Plane: Allow center throttle to be trim airspeed in cruise
2018-09-11 09:07:00 +10:00
Michael du Breuil
ee96c53844
Plane: Don't go to minimum airspeed when in RC failsafe in cruise/fbwb
2018-09-11 09:07:00 +10:00
Michael du Breuil
f9e56f9d12
Plane: Respect frame type on VTOL_TAKEOFF commands
...
allow missioncommands to fail to start
2018-09-11 06:42:00 +10:00
Peter Barker
b574f4c1fc
Plane: move support for inverted flight to rc-aux-switch
...
Functional change here; if someone de-configures the rc aux switch in
flight they will remain inverted
2018-09-07 09:07:40 +10:00
Peter Barker
4ad1869f43
Plane: add arm/disarm on aux switch
2018-09-06 08:26:50 +10:00
Peter Barker
901664ce09
Plane: add support for RCn_OPTION (servorelay,camera)
...
Closes #7071
Closes #7666
2018-09-05 13:44:07 +10:00
Michael du Breuil
925d76bb8c
Plane: Small cleanup to quadplane const (and clarity)
2018-09-04 15:11:41 +10:00
Leonard Hall
e11c7c6069
QuadPlane: remove true from init of loiter
2018-09-04 13:37:28 +09:00
Peter Barker
1aa75e4c3e
Plane: use camera singleton to get camera rather than callback
2018-08-31 15:48:56 +10:00
Peter Barker
558158c62a
Plane: GCS_MAVLink uses compass singleton, stop implementing get_compass
2018-08-31 15:48:56 +10:00
Andrew Tridgell
066c26e445
Plane: updated 3.9.1 release notes
2018-08-31 12:35:59 +10:00
Michael du Breuil
3098744777
Plane: Fix a stale rudder input that was left from rebase
2018-08-28 10:44:17 +10:00
Michael du Breuil
8417bcc7d5
Plane: Add flight options bitmask
2018-08-28 09:40:53 +10:00
Andrew Tridgell
d1f419b530
Plane: updated release notes for 3.9.1beta3
2018-08-23 13:30:14 +10:00
Michael du Breuil
e4bbcd5ee3
Plane: Don't initilize motors with a trim value
2018-08-23 13:19:08 +10:00
Andrew Tridgell
d9b72f6821
Plane: reset rudder input during RC failsafe
2018-08-23 12:55:11 +10:00
Michael du Breuil
9ed5184d98
Plane: Remove unneeded ServoRelayEvent mask set
2018-08-20 21:31:06 -07:00
Michael du Breuil
fa1ad09a3b
Plane: Remove unneeded rudder set
2018-08-21 08:32:56 +10:00
Andrew Tridgell
b11552e945
Plane: update release notes for 3.9.1beta2
...
# Conflicts:
# ArduPlane/release-notes.txt
2018-08-17 20:43:02 +10:00
Alexander Malishev
001948d40c
Plane: publish navigation info to OSD
2018-08-16 10:26:34 +10:00
Michael du Breuil
c8cb5b9e0f
Plane: Log target airspeed to NTUN messages
2018-08-09 11:53:05 +10:00
Michael du Breuil
3d923d0572
Plane: Send a quadplane version of NAV_CONTROLLER_OUTPUT
2018-08-07 09:49:01 +10:00
Randy Mackay
903d00c4b2
Plane: remove compass accumulate
2018-08-06 11:05:34 +10:00
Andrew Tridgell
690bbcdaad
Plane: release notes for 3.9.0
2018-08-06 10:44:29 +10:00
Andrew Tridgell
c964a393c0
Plane: fixed RC_Channels parameter docs
2018-08-04 12:28:38 +10:00
Peter Barker
9ce02bc504
Plane: minimal support for inheritting from RC_Channel
2018-08-01 12:11:30 +09:00
Michael du Breuil
eea8267704
Plane: Update notify initilization
2018-08-01 09:22:09 +10:00
Andrew Tridgell
4f2508d89f
Plane: updated release notes for 3.9.0beta6
2018-07-30 18:18:53 +10:00
Andrew Tridgell
1d675390ab
Plane: make soaring an optional build feature
...
this disables soaring on px4-v2, saving 5k of flash
This is needed to consider pr #9042 , which takes a lot of flash space
2018-07-30 13:09:15 +10:00
Andrew Tridgell
16c7ab81dc
Plane: pass rc_speed to motor backend constructors
...
this sets the right speed as early as possible
2018-07-28 15:25:57 +10:00
Andrew Tridgell
a4d3b08d87
Plane: release notes for 3.9.0beta5
2018-07-19 12:42:27 +10:00
IamPete1
20c67019b0
Plane: added Q_TAILSIT_THSCMX
...
this provides more flexibility in tailsitter throttle scaling
2018-07-19 09:48:25 +10:00
Andrew Tridgell
149a6af48f
Plane: releases notes for plane 3.9.0beta4
2018-07-18 20:45:02 +10:00
Andrew Tridgell
07187f7797
Plane: fixed ARMING_REQUIRE=2 for dual-motor planes
...
many thanks to Marco for finding this bug!
2018-07-18 19:58:02 +10:00
Michael du Breuil
f25726fbb1
Plane: Remove unused ADC include
2018-07-17 09:29:50 +10:00
Andrew Tridgell
ad55605605
Plane: update version to 3.10.0-dev
2018-07-06 11:01:05 +10:00
Andrew Tridgell
db1f1a42d6
Plane: updated 3.9.0beta2 release notes
2018-07-06 10:59:55 +10:00
Peter Barker
94ad85a67d
Plane: handle MAV_CMD_ACCELCAL_VEHICLE_POS in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
d077723028
Plane: handle command_int in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
d76e7d210b
Plane: handle command_long in GCS base class
2018-07-06 09:43:09 +10:00
Andrew Tridgell
1d91f18177
Plane: fixed version for enums
2018-07-05 11:10:31 +10:00
Andrew Tridgell
bd4515947a
Plane: updated release notes
2018-07-05 11:10:27 +10:00
Peter Barker
85f339caae
Plane: remove annoying ice_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
e404562544
Plane: remove vexing button_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
c42fb6d797
Plane: remove pointless rangefinder_init shim function
2018-07-04 21:08:47 +01:00
Peter Barker
4502fd21c3
Plane: use compass singleton for logging
2018-07-04 20:11:27 +01:00
Peter Barker
3bfa4c8678
Plane: use singletons in AP_Arming
2018-07-03 13:44:11 +10:00
Peter Barker
320e24af65
Plane: move mavlink reboot code up to base class
2018-07-03 12:12:25 +10:00
Jacob Walser
4eb00ac779
Plane: refactor output_test -> output_test_seq
2018-07-02 11:31:58 -04:00
Lucas De Marchi
1a45aa12f5
AP_Param: warn on last pass only about unknown parameters
...
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
Lucas De Marchi
7f0d5ddf21
AP_Param: stop panic()'ing on unknown parameters
...
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.
On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.
This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Andrew Tridgell
bc503cc600
Plane: moved OSD to top level params
...
this is to give lots of depth for OSD params (which will be very
complex)
2018-06-27 14:55:00 +10:00
Alexander Malishev
75bf6984f5
Plane: added OSD support
2018-06-27 14:55:00 +10:00
Michael du Breuil
1c276e6af7
Plane: Remove unneeded wrapper functions
...
Also removes unneeded battery failsafe flag clearing
2018-06-27 11:39:35 +10:00
Peter Barker
23919daf11
Plane: use arming check_failed function
2018-06-23 15:33:19 +10:00
Andrew Tridgell
d454bc555e
Plane: added ESC_TELEMETRY to mavlink streams
2018-06-21 10:48:02 +10:00
Peter Barker
f984e5e31d
Plane: use magic force arm/disarm definitions
2018-06-20 11:43:38 +10:00
Peter Barker
f5e241af01
Plane: option to force arm, bypassing checks
2018-06-20 11:43:38 +10:00
Peter Barker
2b7f9247e8
Plane: use AP_FWVersion singleton
2018-06-18 19:10:37 +01:00
Peter Barker
9824832523
Plane: use AP_RTC
...
Plane: AP_GPS now sets the system time directly
2018-06-15 08:01:22 +10:00
Michael du Breuil
12da35220c
Plane: Simplify radio trimming, improve MAVLink report
2018-06-11 16:29:36 -07:00
Michael du Breuil
fae8d1e489
Plane: Log navigation target location
...
Closes #4358
2018-06-12 09:08:58 +10:00