dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
34,010 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

937 Commits

Author SHA1 Message Date
David Sidrane f870594f1d px4_fmu-v6x Updates for NuttX 9.1.0- 
px4_fmu-v6x: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane acea295d5a px4_fmu-v5x Updates for NuttX 9.1.0- 
px4_fmu-v5x: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane b52e10720e px4_fmu-v5 Updates for NuttX 9.1.0- 
px4_fmu-v5: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane f98d10bf15 px4_fmu-v4pro Updates for NuttX 9.1.0- 
px4_fmu-v4pro: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 9986f63321 px4_fmu-v4 Updates for NuttX 9.1.0- 
px4_fmu-v4: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 0da14887d0 px4_fmu-v3 Updates for NuttX 9.1.0- 
px4_fmu-v3: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 77ce7b2457 px4_fmu-v2 Updates for NuttX 9.1.0- 
px4_fmu-v2: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 9a19340dc3 omnibus_f4sd Updates for NuttX 9.1.0- 
omnibus_f4sd: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane ddacf357a7 nxp_rddrone-uavcan146 Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane 5698bc254a nxp_fmurt1062-v1:Track PX4 Sensor changes 2020-09-16 21:32:04 -04:00
David Sidrane 1abe88df61 nxp_fmurt1062-v1 Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane aa67fbdbcb nxp_fmuk66-e: Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane 8a673c8a3d nxp_fmuk66-v3 Updates for NuttX 9.1.0- 
nxp_fmuk66-v3: defconfig MMCSD enable multiblock

nxp_fmuk66-v1:Disable multiblock as it fails
 2020-09-16 21:32:04 -04:00
David Sidrane aa1cb370e4 mro_x21 Updates for NuttX 9.1.0- 
mro_x21: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane c9a323ebcc mro_x21-777 Updates for NuttX 9.1.0- 
mro_x21-777: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 2550d6f7c1 mro_ctrl-zero-f7 Updates for NuttX 9.1.0- 
mro_ctrl-zero-f7: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane c8ef85c090 modalai_fc-v1 Updates for NuttX 9.1.0- 
modalai_fc-v1: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 20398c3933 intel_aerofc-v1 Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane c2419e7f3d holybro_pix32v5: Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane abe9f1a768 holybro_kakutef7 Updates for NuttX 9.1.0- 
holybro_kakutef7: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 59f914427c holybro_durandal-v1 Updates for NuttX 9.1.0- 
holybro_durandal-v1: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane f21925f976 cubepilot_io-v2: Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0- 
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 5691bf1dee cubepilot_cubeorange Updates for NuttX 9.1.0- 
cubepilot_cubeorange: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane e16efd9643 cuav_x7pro Updates for NuttX 9.1.0- 
cuav_x7pro: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 93e3b52515 cuav_nora Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane b8db1e6380 bitcraze_crazyflie Updates for NuttX 9.1.0- 
bitcraze_crazyflie: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane e487833347 av_x-v1 Updates for NuttX 9.1.0- 
av_x-v1: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 8e97ae323e airmind_mindpx-v2 Updates for NuttX 9.1.0- 
airmind_mindpx-v2: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
Julian Oes db87ba3a1c systemcmds: add new failure command 
This adds a new systemcmd to inject failures into the system.
 2020-09-16 12:51:56 -04:00
Peter van der Perk 0caad08dd5 Added RTPS target for FMUK66-V3 2020-09-16 09:42:34 -04:00
Daniel Agar 0e9a4cc65f boards: px4/sitl sync all build variants and fix none default package 2020-09-15 21:13:04 -04:00
Daniel Agar 5e4e4a4573 boards: aerotenna ocpoc fix package (new ROMFSROOT was missing) 2020-09-15 21:13:04 -04:00
Beat Küng ef55680ab1 sitl: enable EMBEDDED_METADATA to add parameter metadata to ROMFS 2020-09-15 09:30:16 +02:00
Beat Küng 055fa768d8 posix: enable ROMFSROOT 
This will copy the ROMFS into the build directory under etc/, and thus
needs a change of the PX4 startup parameters and mixer paths.
 2020-09-15 09:30:16 +02:00
SalimTerryLi 28a6e82698
Introduce new generic ADC driver for ADS1115 chip (#14437) 2020-09-14 11:03:40 -04:00
flbernier 0ece66dc80 Add a internal start for rgbled_ncp5623c on fmu-v2 v3 v4pro 2020-09-14 09:31:31 -04:00
Daniel Agar 198466306e
boards: airmind mindpx-v2 fix internal qmc5883l rotation 2020-09-13 18:28:31 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 3fa9ff6d20 boards: px4_fmu-v5_debug increase LPWORK stack 1632 -> 1728 bytes 2020-09-06 18:36:30 -04:00
Beat Küng 787f9c1213 i2c: use board-specific bus numbering for '-X -b <bus>' CLI 
As boards don't have their external buses labeled consistently, it was not
useful to use an abstraction.
 2020-09-03 15:32:35 -04:00
David Sidrane fdcd9b2de1 npx_fmurt1062-v1:CONFIG_BOARD_CRASHDUMP is not supported 2020-09-03 14:55:09 +02:00
David Sidrane 5d5a767143 npx_fmuk66:CONFIG_BOARD_CRASHDUMP is not supported 2020-09-03 14:55:09 +02:00
Daniel Agar 24125b3da4
magnetometer/qmc5883l: cleanup/rewrite driver (#14384) 2020-09-02 13:16:27 -04:00
Daniel Agar 7569722821
iSentek IST8310 magnetometer rewrite 
- simple state machine to reset, configure, etc
 - checked register mechanism (sensor will reset itself on configuration error)
 - configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
 - adjusted orientation handling in driver to match datasheet as closely as possible
     - in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
 2020-09-02 13:14:45 -04:00
gitfishup f3579e473b
boards: CUAV Nora enable UAVCAN 2020-09-01 21:16:17 -04:00
Daniel Agar dd9676b73e
boards: px4/fmu-v5_debug increase interrupt stack 512 -> 768 bytes 2020-09-01 20:04:06 -04:00
Matthias Grob 180c6faf4a syslink_main: remove empty lines and struct keyword 2020-09-01 10:25:03 +02:00
CUAVcaijie 536877cf0a
boards: add UAVCAN timer override mechanism and CUAV X7 add CAN (#15348) 
* X7Pro adds CAN driver
* UAVCAN timer selection moved to default.cmake
* Modify some details about @CUAVcaijie UAVCAN timer selection moved to default.cmake
* Put some timer parameters to micro_hal.h from board_config.h. Fix all h7 boards

Co-authored-by: honglang <honglang@cuav.net>
 2020-08-28 12:16:48 -04:00
Beat Küng 4088c2581f
i2c_spi_buses: add '-q' for quiet startup flag (#14969) 
* [WIP] i2c_spi_buses: add '-q' for quiet startup flag

And enable for optional board sensors.

* ROMFS: rc.sensors try starting all optional I2C sensors quietly

Co-authored-by: Daniel Agar <daniel@agar.ca>
 2020-08-26 08:46:35 +02:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
modaltb d9bbed767c
modalai_fc-v1 - power_monitor/voxlpm: add support for voxlpm v3 (INA231 sensors) 2020-08-19 00:01:31 -04:00
Travis Bottalico e325ca25bb modalai-fc-v1 - update default MAVLink configuration 2020-08-18 20:45:20 -04:00
Daniel Agar 91ad8473ab boards: cubepilot/cubeorange small fixes and improvements 
- defconfig UART sync with cube yellow (and other boards)
 - manually start ak09916 (Here2) on I2C2 with proper rotation
 2020-08-16 17:45:47 -04:00
Daniel Agar 65ab7cef2e boards: cubepilot/cubeyellow small fixes and improvements 
- fix UART config (GPS1, etc)
 - TELEM2 enable TX DMA
 - init simplify (sync with CubeOrange)
 - amber LED use for armed state
 - manually start ak09916 (Here2) on I2C2 with proper rotation
 2020-08-16 17:45:47 -04:00
David Sidrane 22a7bf6ec7 px4_fmu-v6x Fix BOARD_TYPE 2020-08-14 11:23:16 -04:00
Daniel Agar 6937dbc5fd
boards: add CUAV Nora support 2020-08-12 13:02:16 -04:00
SalimTerryLi 49e83b6ae4
load_mon: add linux support 2020-08-11 18:33:44 -04:00
David Sidrane 329ed6e273 px4_fmu-v5/v5x: Re-enable TXDMA 2020-08-11 12:27:28 -04:00
Daniel Leonard Robinson fa4818e467
vehicles: add new vehicle type: Airship (#14862) 
Co-authored-by: Anton Erasmus <anton@flycloudline.com>
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
 2020-08-10 08:52:51 +02:00
Daniel Agar fbc8e1b09e boards: mRo X2.1-777 fixes 
- ardupilot bootloader compatibility (first 3 sectors)
 - clock tree fixes
 - start mavlink
 - start mpu9250 magnetometer (only onboard mag)
 - fixes https://github.com/PX4/Firmware/issues/15466
 2020-08-09 14:24:49 -04:00
Daniel Agar e16c8fa345
boards: add new Holybro Pix32v5 2020-08-09 11:48:38 -04:00
Igor Mišić f5283e0da1 spracing_h7extreme: OSD enabled with added internal SPI bus flag 2020-08-04 19:07:15 -04:00
Beat Küng ca189fefb7 v5x: use board-specific camera capture pin PI0 2020-08-04 13:37:40 +02:00
Beat Küng 316085c154 camera_capture: remove board-specific ifdef 2020-08-04 13:37:40 +02:00
Daniel Agar a93052f9b2 boards/spracing/h7extreme: delete unused stackcheck build 2020-08-03 15:56:33 -04:00
Igor Mišić 7eaa48e36f
New board: SP Racing H7 Extreme 
Authored-by: igor.misic <igor.misic@rimac@automobili.hr>
 2020-08-03 15:32:58 -04:00
David Sidrane e67486d603 nxp:Add support for rev E HW nxp_fmuk66-e 2020-07-31 09:46:27 -04:00
David Sidrane f8b6de24c7 nxp_fmurt1062-v1:Assign board_id 2020-07-31 09:46:27 -04:00
Daniel Agar cfbf69f2a7
boards: rename Hex -> CubePilot 
- hex_cube-orange_default -> cubepilot_cubeorange_default
 - hex_cube-yellow_default -> cubepilot_cubeyellow_default
 2020-07-26 13:55:41 -04:00
Daniel Agar 62fe6d59cc
boards: hex cube yellow fix STM32F7 selection (STM32F765II -> STM32F777VI) 2020-07-24 12:03:25 -04:00
Mirko Denecke 7ac66bae4f hex io firmware remove double definition of GPIO_HEATER_OFF 2020-07-23 09:41:05 -04:00
Mirko Denecke b7389119b3 px4 io firmware remove double definition of GPIO_HEATER_OFF 2020-07-23 09:41:05 -04:00
Mirko Denecke 01e9599e93 HEX Cube Yellow: enable platform-specific IO firmware with inverted heater pin. 2020-07-22 10:50:47 -04:00
Mirko Denecke 44e2c326e0 HEX Cube Orange: enable platform-specific IO firmware with inverted heater pin. 2020-07-22 10:50:47 -04:00
Mirko Denecke 57968c6e27 Add platform-specific IO firmware for HEX autopilots. 2020-07-22 10:50:47 -04:00
rolandash b8f3b97bad
Enable PMW3901 on MindPX/MindRacer. (#15375) 
* enable pmw3901 on MindPX/MindRacer.

* remove useless line.
 2020-07-19 16:09:57 +01:00
Daniel Agar 3dd7d0c292 boards: fmu-v5 debug variant disable unnecessary modules to save flash 
- partially sync with fmu-v5 stackcheck build
 2020-07-18 13:41:26 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar b277840233 boards: create px4_fmu-v5_debug build with assertions enabled 2020-07-06 11:13:15 -04:00
Beat Küng 03e51076b0 v5x: fix icm20602 sensor orientation 
and reorder baro startup, so that the other one is used by default.
 2020-07-06 11:02:48 +02:00
Jari van Ewijk fe7fcb101f NXP FMUK66 - Fix VDD_3V3_SENSORS_EN polarity 2020-06-29 07:45:47 -07:00
Beat Küng 157ef43e28 replay: use lockstep scheduler 2020-06-23 11:53:55 -04:00
David Sidrane df73662d66 nxp_fmuk66-v3:Add Full networking support 2020-06-22 18:43:03 -04:00
Mirko Denecke 147fb0afa4 Hex/Proficnc CubeOrange: fix default config for IMU heating 2020-06-22 13:12:08 -04:00
Mirko Denecke d9f813a443 Hex/Proficnc CubeYellow: fix default config for IMU heating 2020-06-22 13:12:08 -04:00
Daniel Agar d9102ce54c imu/invensense/icm20948: sync with other recent invensense improvements 
- clenaup ak09916 with simplifed setup and health check
 2020-06-22 10:11:22 -04:00
David Sidrane 28a695dce4 px4_fmu-v6x:imu/bmi088->imu/bosch/bmi088 2020-06-19 19:13:20 -04:00
JacobCrabill 62799d9aca UAVCAN: Add STM32H7 FDCAN Driver 
Took the existing uavcan_stm32 driver and replaced all bxCAN code with
the equivalent for FDCAN following ST Reference Manual RM0433.

Note: There is still a bug somewhere in regards to FDCAN2 (probably
incorrect setup of the message RAM? Not sure.)  But (FD)CAN1 is fully
functional (Classic CAN only, no CAN-FD).

Also TODO: Configure CAN filters.  Right now there are no filters; all
incoming messages are accepted.
 2020-06-18 18:55:21 -04:00
JacobCrabill 08d2226043 CubeOrange: Move console back to CONS (UART7) 2020-06-18 18:55:21 -04:00
Daniel Agar 0a63df25a6 create fake_magnetometer "driver" to publish magnetic field in body frame 
- this can be helpful for orienting new unknown magnetometers
 - requires attitude and GPS position
 2020-06-18 16:21:30 -04:00
Daniel Agar e819f99064 new Bosch BMI055 IMU driver using FIFOs and DRDY 
- accel & gyro FIFOs enabled
 - FIFO watermark on data ready interrupt
 - sensor side filtering completely disabled
 - gyro now respects `IMU_GYRO_RATEMAX` (up to 2 kHz)
 - saves a few % cpu (at default rate)
 2020-06-15 10:19:14 -04:00
CUAVcaijie 1c02c37955
boards/cuav/x7pro: RC03 RM3100 moved from SPI1 to SPI2 2020-06-11 21:38:55 -04:00
CUAVcaijie dee56e78aa
boards/cuav/x7pro: fix X7 LED SAFETY configuration 
* keep the naming identical to the pinout
 2020-06-11 21:32:53 -04:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
CUAVcaijie b6ec00c079
boards/cuav/x7pro: Fix HIPOWER enabled state 2020-06-11 12:05:37 -04:00
CUAVcaijie 9270b26c63 IO's RGB status light is modified to PWM breathing light 2020-06-11 12:02:49 -04:00
CUAVcaijie 67554acf9e x7 add led_pwm driver 2020-06-11 12:02:49 -04:00
CUAVcaijie 37fb4dbb64 Enable safety button 2020-06-10 09:14:25 -04:00
Mirko Denecke 10afcdce2e Hex/Proficnc Cube Yellow: align firmware location in flash memory to be able to use the default bootloader 2020-06-10 09:08:11 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Beat Küng 590b65ebfb Revert "kakutef7 spi: disable IMU drdy" 
This reverts commit 2069576a6e.

PR #15004 fixed the problem.
 2020-06-09 09:11:51 -04:00
David Sidrane 82b87adfb3 px4_fmu-v6x:default phy is LAN8742 2020-06-09 08:14:22 +02:00
David Sidrane 0bb8d7a065 px4_fmu-v5x p4 (-06) default to suporting LAN8742Ai 2020-06-09 08:12:44 +02:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 5507c15bdc boards: move rgbled_pwm startup to appropriate boards 2020-06-08 16:49:46 -04:00
Mirko Denecke cf02b88d51
Initial Hex/Proficnc Cube Yellow support 2020-06-08 08:22:40 -04:00
David Sidrane 626895eadc px4_fmu-v5x:Wrong Bit was being tested for mode. 
@TSC21  - this will fix you build
 2020-06-05 18:59:48 -04:00
Daniel Agar 31fe7af454 selectively increase optimization -Os -> -O2 
- targetted at modules/libraries that benefit without drastically
increasing flash usage
 - ignored on boards with CONSTRAINED_FLASH set
 2020-06-04 20:59:52 -04:00
Beat Küng 2069576a6e kakutef7 spi: disable IMU drdy 
It cause bad transfers on a Kopis 2, though not on a bench KakuteF7 unit.
Not sure if this is a single case.

nsh> icm20689 status
INFO  [SPI_I2C] Running on SPI Bus 4
INFO  [icm20689] FIFO empty interval: 1000 us (1000.000 Hz)
icm20689: transfer: 46375 events, 6790549us elapsed, 146.43us avg, min 54us max 1709us 81.564us rms
icm20689: bad register: 0 events
icm20689: bad transfer: 4284 events
icm20689: FIFO empty: 0 events
icm20689: FIFO overflow: 1 events
icm20689: FIFO reset: 2 events
icm20689: DRDY interval: 375585 events, 124.93us avg, min 99us max 250us 2.322us rms
INFO  [drivers_accelerometer] /dev/accel device instance: 0
INFO  [drivers_accelerometer] calibration scale: 1.02174 0.99918 0.98338
INFO  [drivers_accelerometer] calibration offset: 0.76124 -0.00725 -0.16437
INFO  [drivers_gyroscope] /dev/gyro device instance: 0
INFO  [drivers_gyroscope] calibration offset: -0.08153 0.02432 0.00050
 2020-06-04 20:58:40 -04:00
Daniel Agar d1c12ac7cf boards: mRo Control Zero fix IMU rotations 2020-06-04 11:34:31 -04:00
Mirko Denecke 4a637a5c54 Hex CubeOrange: enable DMA for SPI1 2020-06-04 10:25:52 -04:00
Mirko Denecke 61a2dd8ec6 Hex CubeOrange: limit slew rate so IMU works with DMA 2020-06-04 10:25:52 -04:00
Mirko Denecke b4e39f91a4 Hex CubeOrange: no LSE available 2020-06-03 21:09:50 -04:00
Mirko Denecke 3e4179cc88 Hex CubeOrange: fix comment calc of PLL 2020-06-03 21:09:50 -04:00
Daniel Agar 6c96748e54 boards: pixhawk mini add unused MPU9250 CS & DRDY pins 2020-06-03 04:03:27 -07:00
David Sidrane 73bb18a053 px4_fmu-v6x: Limit Slew rate So IMU works with DMA 
The defualt in NuttX is OSPEED of 50Mhz. This is realy a slew
   rate control. At the default high slew rate the overshoot was
   .7 Volts. On a ICM20649 this was causing the device to output
   garbage. All 0s

   N.B. A passive scope or Logic analyser's probes load will mask
   the failure. Useed a FET probe to verify the issue.
 2020-06-02 13:02:51 -04:00
David Sidrane 5d90c31632 Added PX4 FmuV6X 2020-06-02 13:02:51 -04:00
Mirko Denecke 86cd1d0802 Hex CubeOrange: fix comment for TONE_ALARM_CHANNEL pin 2020-05-29 23:44:17 +01:00
Mirko Denecke b5ff82bccc Hex CubeOrange: remove CAN Silence Silent mode pins 2020-05-29 23:44:17 +01:00
Mirko Denecke fd600d7eed Hex CubeOrange: remove LSM303D 2020-05-29 23:44:17 +01:00
Matthias Grob 88c21337fa Make all battery sensor drivers report their sample interval 
To make use of the time abstraction in the leaky integrator.
 2020-05-25 11:04:24 +02:00
Daniel Agar 1c0925a189
Hex/Proficnc Cube Orange support 
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Crabill <jacob@flyvoly.com>
 2020-05-23 18:31:46 -04:00
Julian Kent dd9c82eb20
systemcmds/gpio: Add nsh command to manipulate/read GPIO 
* Add basic GPIO test app for R/W on pins from nuttx shell
* Add gpio command to fmu-v3 and fmu-v4
* Sanitize gpio commands by pin configs, --force to override
 2020-05-23 11:47:40 -04:00
David Sidrane 04db5391fc px4_fmu-v5x:Fix PG11 assignment 2020-05-23 11:46:00 -04:00
David Sidrane b2153c7f2f px4_fmu-v5x:PG6 is free GPIO 2020-05-23 11:46:00 -04:00
David Sidrane 7f84ed57dd px4_fmu-v5x:Using SE050 not A71CH 2020-05-23 11:46:00 -04:00
David Sidrane 637578b8be px4_fmu-v5x:Correct trace connector description 2020-05-23 11:46:00 -04:00
Daniel Agar 951969ba00
drivers/imu/invensense: new ICM20948 driver on SPI with AK09916 mag 2020-05-22 00:09:30 -04:00
Beat Küng 9c6f42a867 v5x defconfig: increase TELEM2 UART TX buffer size to 3000 
Required for very high-rate log streaming @3MBit baudrate.
 2020-05-20 09:12:50 +02:00
Daniel Agar 678c3fe8e4 boards: px4_fmu-v5_optimized don't build all mags 2020-05-07 15:21:15 -04:00
Daniel Agar 1cce549b2b boards: holybro_durandal-v1_stackcheck don't build all mags 2020-05-07 15:21:15 -04:00
Daniel Agar 04113b4d57 commander: changes when USB connected 
- skip avionics rail voltage check when USB connected
 - skip forced reboot on USB disconnect if circuit breaker set
 - avionics voltage preflight check don't silently fail if system_power unavailble
     - explicitly set supply check circuit breaker (CBRK_SUPPLY_CHK)
 2020-05-06 13:53:54 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar d89b7804f7
boards: initial CUAV X7Pro support (not complete) 
- this is booting and functional, but still missing a few things
 - still needs full PWM output, verification of all sensor rotations and IO, etc
 2020-05-01 20:59:28 -04:00
Daniel Agar 76cfd8fa39
boards: add nxp fmuk66-v3 and rddrone-uavcan146 socketcan builds 2020-04-30 15:04:08 -04:00
Daniel Agar 3e5f85b47b
uavcannode: add distance_sensor (all possible instances) 2020-04-30 14:52:06 -04:00
Jakub Kákona dfa5ca1710
FlightGear simulator support (#14539) 
- Add flightgear_bridge submodule.
- Add traget px4_sitl_nolockstep with disabled  LOCKSTEP simulation.
- Add flightgear viewer targets and startup scripts
- Add a few possible vehicles plane (rascal), autogyro (tf-g1), and rover (tf-r1))

Co-authored-by: Vit Hanousek <vithanousek@seznam.cz>
 2020-04-29 08:46:59 +02:00
Beat Küng 34c75f2d36 boards: temporarily disable UART TX DMA 
work-around for https://github.com/PX4/Firmware/issues/14659.
This can be reverted when fixed properly.
 2020-04-27 08:47:46 -04:00
Daniel Agar 5739cf27e5 boards: delete obsolete commented config systemcmd 2020-04-26 22:34:34 -04:00
Roman Dvořák 75fe3bee8c
drivers/rpm: add simple RPM message simulator (dummy publisher) 2020-04-25 09:10:11 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
Daniel Agar 7c7ee115e3
boards: px4_io-v2 defconfig optimizations to save memory 
* disable CONFIG_ARMV7M_MEMCPY to save flash
* disable CONFIG_LIB_BOARDCTL
* remove unnecessary pthread and task settings
* reduce preallocated watchdogs
* reduce console buffer size
* reduce IDLE thread stack
* reduce user main stack

Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
 2020-04-15 23:17:44 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 1ac6230758 boards: always change default IMU_GYRO_RATEMAX on px4_fmu-v2/v3 and mro_x21 
- this can lower cpu usage considerably on older boards
 2020-04-15 21:52:02 -04:00
Daniel Agar 588195f46c boards: px4/fmu-v4pro cleanup rc.board_sensors 
- board has either an icm20602 or icm20608g, not both
 - probe all typical externally compasses
 2020-04-13 15:52:45 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar 276b2cad5a
boards: fmu was renamed pwm_out 2020-04-11 14:18:55 -04:00
Daniel Agar 55fc0cbdc7 boards/px4/fmu-v4: fix internal hmc5883 start 2020-04-09 15:54:10 -04:00
Beat Küng 8338f4e543 uvify/core: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Beat Küng 31937c280d px4/v4: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Beat Küng cbed023334 px4/v{2,3}: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Beat Küng 68e1172bb5 px4/v5x: enable tx dma on telem2 2020-04-09 14:59:28 +02:00
Beat Küng c713ce721e KakuteF7: enable SPI DMA for SPI 4 
DMA for SPI 1 left disabled because the SD card does not work when enabling
it.
 2020-04-08 15:31:51 -04:00
Daniel Agar a89bba470a boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling 
- this doesn't currently change anything, but gets us ready to start
experimenting with using the small amount of instruction tightly memory
on STM32F7
 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS
 2020-04-08 13:20:54 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar da383064c6 NuttX update with STM32H7 SPI DMA support 
- holybro durdandal enable SPI DMA
 2020-04-06 22:08:45 -04:00
Julian Oes f650b91718 battery: check source param inside battery lib 
This moves the handling of the BAT%d_SOURCE param inside of the battery
library. Users of the library now pass the source instead of the flag
whether to publish. The battery library then checks if the source is
selected using the param and publishes accordingly.

Since we removed the strange system_source flag, we now need to look at
all batteries in commander.
For current estimation - I think - it makes sense to sum them up.
 2020-04-06 15:56:54 +02:00
Julian Oes b01cdafcf6 boards: add esc_battery to build 2020-04-06 15:56:54 +02:00
Julian Oes 509b8b6b4b First skeleton for esc_battery module 2020-04-06 15:56:54 +02:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
David Sidrane 025799248c holybro_durandal-v1:Ensure SDMMC power seqensing is clean 2020-04-04 09:39:53 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar 7c8ab49eb9 boards: mro_ctrl-zero-f7 fix i2c 
- STM32_HSI_FREQUENCY 24 MHz -> 16 MHz (required for NuttX stm32f7 i2c)
 2020-04-01 14:27:33 -04:00
Daniel Agar 02f4ad61ec
I2C/SPI require device type in constructor 2020-04-01 12:24:22 -04:00
Daniel Agar 1cc8e4dc1a distance_sensor/vl53l0x: move to PX4Rangefinder and cleanup 2020-04-01 10:06:08 -04:00
Daniel Agar baa50a1985 boards: omnibus/f4sd add board_dma_map.h 2020-04-01 10:42:09 +02:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 39b47e63b5 boards: airmind mindpx-v2 switch to new mpu6000 and mpu6500 drivers 2020-03-31 16:28:45 -04:00
Beat Küng cc6ae7ad41 fix omnibus/f4sd: bmp280 start 2020-03-30 15:52:41 -04:00
Beat Küng fc3b497b41 omnibus/f4sd: switch over mpu6000 driver 
I'm seeing 'mpu6000: FIFO empty: 49 events' increasing, but that is
epxected as there's no DRDY.
 2020-03-30 15:52:41 -04:00
Daniel Agar a38d4192ab boards: airmind mindpx-v2 fix L3GD20 DRDY pin 2020-03-30 09:21:00 -04:00
Peter van der Perk 9490f41f85 rddrone-uavcan146 removed shared clock between hrt & rtc 
Removed non-existing SW2 button
Fixed SW3 button pinmux
Added FlexCAN pin definition
hrt use external sirc clock
rtc use 32khz lpo clock
 2020-03-28 06:31:11 -07:00
Travis Bottalico e898b7f110 - Remove RC_SERIAL_SINGLEWIRE, this broke Spektrum radio on last commit 
- set FSYNC INT pins to 0 to be safe
 2020-03-26 13:54:12 +01:00
baumanta 2103b8f7de fmu-v5_optimized: disable esc_calib 2020-03-26 08:00:30 +01:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Peter van der Perk a4e6f96365
rddrone-uavcan146: HRT & RTC timer support 2020-03-25 16:37:28 -04:00
Hyon Lim 2b54e19adf Script: As recent driver refactoring checkes start argument first, we change script accordingly. 2020-03-25 16:16:45 -04:00
Hyon Lim fd0ea29fc6 Board support: UVify Core. As Core is not using SPI4 as external, SPI4 external interface related code removed. 
Also, PMW3901 flow sensor is added on SPI2 bus.
 2020-03-25 16:16:45 -04:00
Hyon Lim 1161dac875 Script update: PMW3901 driver argument has changed. so we change scripts and SPI interface. 2020-03-25 16:16:45 -04:00
Hyon Lim e8f0c8e239 NSH argument stack increased. Specific MAVLink configuration requires more than 12 parameters. 2020-03-25 16:16:45 -04:00
Hyon Lim afcf0960df IFO-S RGB LED app setting has been changed. 2020-03-25 16:16:45 -04:00
Hyon Lim 15f997d337 Airframe: IFO-S setup is added. 2020-03-25 16:16:45 -04:00
Daniel Agar f4e2cd36d4 add new invensense/mpu6500 driver for airmind mindpx 2020-03-25 01:05:38 -04:00
Daniel Agar f5fe50f839 invensense/icm20608g driver minor improvements 
- interupt pin set active low and latch
 - relax retry timeout if configure failed
 - improve configured empty rate (sample rate) rounding
 - fix RegisterCheck
 - check FIFO count as part of full transfer and reset or adjust timing if necessary
 - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G
 2020-03-25 01:05:38 -04:00
Daniel Agar a13e8e573e boards: fmu-v2/v3 rc.board_sensors remove obsolete hmc5883 argument 
- try to keep fmu-v2/v3 mostly in sync
 2020-03-24 09:46:20 -04:00
Beat Küng 81dc73b752 fmu-v5_optimized: disable bl_update 
to reduce FLASH usage
 2020-03-24 09:46:20 -04:00
Beat Küng 7ea8dff8db spi: do not deselect other chip-selects 
And make sure on reset & init everything is deselected.

Reduces CPU load on a pixhawk cube by almost 1%.
 2020-03-24 09:46:20 -04:00
Beat Küng 6a41c9e417 refactor fxos8701cq: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 5fa4cd1019 refactor fxas21002c: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 974cb30b6d nxp_rddrone-uavcan146 ignore i2c for now (platform support is incomplete) 2020-03-24 09:46:20 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng f74474dd55 fmuk66-v3: fix spi bus numbering passing to px4_spibus_initialize 
Fixes an error on bootup ([boot] FAILED to initialize SPI port 0). Other
than that, everything was working.
 2020-03-24 09:46:20 -04:00
Beat Küng 04cffce992 refactor aerofc_adc: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 030ba24f53 refactor pca9685: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 6588dd0861 refactor icm20948: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 924f46ee28 refactor icm20608g: use driver base class 2020-03-24 09:46:20 -04:00