Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
42,640 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

71 Commits

Author SHA1 Message Date
Peter Barker 09562e1f13 AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS 
These are really bad defines to have hanging around for general use.
 2020-03-03 10:46:06 +11:00
Willian Galvani 4afdff746e AP_HAL: Fix Navigator orientation 
The Rev2 prototype board had the IMU rotated
 2020-02-04 22:47:16 -05:00
Andrew Tridgell f683741a9c AP_HAL: make all semaphores recursive 
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
 2020-01-19 20:19:30 +11:00
Patrick José Pereira dc44a17c46 AP_HAL: Add navigator board 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2020-01-16 08:01:54 +11:00
Andrew Tridgell 2d00298070 AP_HAL: added HAL_MEM_CLASS for amount of memory 2019-10-01 09:29:55 +10:00
Andrew Tridgell 43e011c7a8 AP_HAL: convert Linux compass specification to new probe list 
this avoids the special handling in AP_Compass library
 2019-09-04 16:27:47 +10:00
Andrew Tridgell 9d94598235 AP_HAL: convert linux boards to use baro probe list 2019-08-28 06:54:11 +10:00
Andrew Tridgell 96180018fb AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST 
makes for much simpler addition of new boards, especially with more
than one IMU
 2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ffb8bb546 AP_HAL: enable GPIO scripting on the Disco 2019-07-06 09:02:54 +10:00
Vincent 3177d24429 AP_HAL: Make linux hardware define more readable 2019-06-04 10:00:09 +10:00
mirkix 506da9ac42 AP_HAL: enable UAVCAN for bbbmini, blue and pocket 2019-01-21 08:08:59 +11:00
Michael du Breuil 9a9e715af8 AP_HAL: Define HAL_HAVE_SERVO_VOLTAGE 2018-11-12 23:29:04 +00:00
Andrew Tridgell 6c6dabc33c AP_HAL: set default batt monitoring for bebop and disco 2018-10-31 20:30:35 +11:00
Michael du Breuil 6544f16339 AP_HAL: Make BBBlue use AP_BoardLED2 2018-09-19 22:58:46 +01:00
Michael du Breuil 6f7ced73d6 AP_HAL: Remove bad GPIO LED pins on NavIO2 2018-09-19 22:58:46 +01:00
Andrew Tridgell 55dfefb2d6 AP_HAL: added HAL_Semaphore_Recursive 2018-08-25 15:44:36 +10:00
Andrew Tridgell 0a73c3492d AP_HAL: support HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Lucas De Marchi 7f984f2700 AP_HAL: linux: disable safety switch 
Linux boards don't really handle the safety switch.
 2018-08-02 13:15:02 -07:00
Andrew Tridgell 4939f30ec4 AP_HAL: make linux internal i2c be 0xffff 
based on feedback from Lucas
 2018-07-10 15:39:47 +10:00
Andrew Tridgell b19219d636 HAL_Linux: allow for 16 I2C buses on Linux 2018-07-10 15:39:47 +10:00
Andrew Tridgell 281a1b6569 AP_HAL: added I2C bus mask functions and macros 2018-07-10 15:39:47 +10:00
Lucas De Marchi 49d08ba72a Global: remove minlure 
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.

It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
 2018-06-26 07:32:08 -07:00
Peter Barker f5eb281efd AP_HAL: use AP_RTC 
Also add a define as to whether set_time / get_time can be used
 2018-06-15 08:01:22 +10:00
Eugene Shamaev c410feefa1 AP_HAL: add CAN bus declaration for the intel aero board 2018-05-25 13:53:17 +10:00
Lucas De Marchi a56106cccb AP_HAL: use buildsystem for default directories 2018-05-24 08:00:33 -07:00
Lucas De Marchi 1e7ad72909 AP_HAL: use default storage for more boards 
Boards from Emlid, Erle Robotics and BBB-like ones were agreed to be
changed #7100. Here I'm also change some more, just because they appear
to be using the old default just because of copy and paste. We can
always revert back if we get complains and it seems something trivial.
Almost all boards now are using the the default path for logs, terrain
and params, except those that have restrictions to do so, like ones
using custom distros.
 2018-05-24 08:00:33 -07:00
Francisco Ferreira 695d92ddbf AP_HAL: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
mirkix 76802740cb AP_HAL: fix PocketPilot HMC5843 I2C bus number 2018-05-12 07:16:50 +10:00
mirkix dfd2fb1841 AP_HAL: move BUZZER_PIN into AP_HAL 2018-05-10 17:48:25 +01:00
mirkix 8c36635a8c AP_HAL: LED GPIOs for final PocketPilot design 2018-05-09 16:16:42 -07:00
Lucas De Marchi b54b95de12 AP_HAL: minlure: search for specific I2C controller 
The number can change from one kernel version to another and even from
one boot to another. Find the I2C controller on sysfs and stick to that,
like it's done for PCA9685.
 2018-05-04 11:47:04 -07:00
Lucas De Marchi 4f2498947b AP_HAL_Linux: remove redundant ifdef 
CONFIG_HAL_BOARD_SUBTYPE should be set in the boards header.
 2018-05-04 11:42:55 -07:00
mirkix ee86418587 AP_HAL: change PocketPilot to final baro sensor 2018-05-04 08:00:49 +10:00
Alexey Bulatov 4d08ec8c85 AP_HAL: Edge: set storage directory to /edge/ardupilot 2018-04-04 09:29:16 +09:00
Tom Pittenger a2f1f63ab3 AP_HAL: add param defaults for EMLID_EDGE for GPS_TYPE=9 and CAN_DRIVER=1 2018-02-13 15:29:53 +11:00
Alexey Bulatov 8369f125ce AP_HAL: Edge: add define HAL_WITH_UAVCAN 2018-02-13 13:52:44 +11:00
mirkix 3aa211b325 AP_HAL: fix BeagleBone Blue external I2C number 2018-02-12 09:49:56 +09:00
Igor Anokhin 5cf15db966 AP_HAL: add LSM9DS1 defines 
Add defines for name and number sensor
 2018-02-06 09:31:26 -08:00
Nikita Tomilov a50e6c6dd7 AP_HAL: board: linux: Add default CAN interface name 2018-01-17 07:24:17 -08:00
mirkix 0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
HeBin 895b5f34b8 AP_HAL: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Georgii Staroselskii 6326e23682 AP_HAL: Navio: add defs for BoardLED 2017-11-17 09:20:55 -08:00
alexshirley 065b00eb81 AP_HAL: Remove SBUS macro from ocpoc target 2017-11-01 10:28:40 -07:00
Lucas De Marchi 7fd10921c3 AP_HAL: Linux: add define for storage dir 
This mantains compatibility with what the boards were already using,
except for Aero and Minlure in which I'm changing it already as this is
desired.
 2017-10-30 16:57:37 -07:00
Lucas De Marchi 591b846e2d AP_HAL: switch aero and minlure to new log/terrain directory 
Additionally make Edge use the default.
 2017-10-30 16:57:37 -07:00
Lucas De Marchi d2ba8409d0 AP_HAL: provide default directory for Linux boards 
/var/lib/<project> is more in line to where projects save their data.
Also, remove APM from dir name as it should had been done some time
ago.

This is only the default (and recommended for any new board). Existing
boards that want to adopt the default can remove their defines.
 2017-10-30 16:57:37 -07:00
Georgii Staroselskii 4e2028c32f AP_HAL: Edge: enable Heat PWM 2017-10-20 13:03:08 -07:00
Georgii Staroselskii db9f427617 AP_HAL: Edge: add compass settings 
Use HMC5883L as default before UAVCAN Linux support is in place
 2017-10-20 13:03:08 -07:00
Georgii Staroselskii 2dd68243a2 AP_HAL: add Edge support 2017-10-20 13:03:08 -07:00
Lucas De Marchi 58ae139b8f AP_HAL: add possible external compasses for aero 2017-09-27 09:25:34 -07:00