Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
30,069 Commits 71 Branches 509 Tags 717 MiB
Commit Graph

15406 Commits

Author SHA1 Message Date
Dr.-Ing. Amilcar Do Carmo Lucas f6ab044161 GCS_MAVLink: add microseconds since boot to the home and origin Mavlink messages 2018-01-09 13:01:05 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 479d4be3fd AP_GPS: Add horizontal, vertical and speed accuracy to the GPS_RAW_INT message 2018-01-09 13:01:05 +11:00
Hiroshi Takey (hiro2233) aa6f66f29b AP_Motors: Updated Motor example. 2018-01-09 08:12:01 +09:00
Randy Mackay 1bb18bc941 AR_AttitudeControl: get_throttle_out_speed uses timeout definition 2018-01-05 13:33:21 +09:00
Randy Mackay 4ac5ef3a13 AR_AttitudeControl: allow filter to be zero 
Also increase default filter to 50hz
 2018-01-05 13:33:21 +09:00
Randy Mackay 16d3e5c00d AR_AttitudeControl: add feed foward for speed and steering rate control 2018-01-05 13:33:21 +09:00
Randy Mackay 40bb2b0ad9 AR_AttitudeControl: set throttle speed pid dt 2018-01-05 13:33:21 +09:00
Randy Mackay 9930550cfc AR_AttitudeControl: lengthen timeout to 200ms 
This is required because occasionally the turn rate controller can be disabled for just over 100ms as new navigation commands are loaded
 2018-01-05 13:33:21 +09:00
Randy Mackay a2b1807ca0 AR_AttitudeControl: fix turn-rate controller timeout 2018-01-05 13:33:21 +09:00
Randy Mackay 4e8155f4e5 AC_PID: allow non-zero ff gain default 2018-01-05 13:33:21 +09:00
Randy Mackay 1531801c83 AP_WheelEncoder: minor comment fix 2018-01-04 14:08:17 +09:00
Matt b5bdaa18ac AP_AVOIDANCE: Minimum altitude for avoidance action 2017-12-30 13:50:42 -08:00
dheideman 521bece9e7 AP_JSButton: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman 307638e8af AP_JSButton: Add momentary servo button function 2017-12-28 14:14:47 -05:00
dheideman dd239183c1 AP_JSButton: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Peter Barker 588b0c17c8 AC_Fence: remove AC_FENCE_TYPE_NONE define 
0 is the appropriate value for a bitmask which is empty
 2017-12-28 15:38:37 +00:00
Peter Barker aa482bae40 AC_Fence: remove argument to check() 
Also, rename check_fence() to check()
 2017-12-28 15:38:37 +00:00
Andrew Tridgell 55f73f4163 AP_Airspeed: fixed timing errors in MS5525 driver 
this fixes issue #7188, where we could read from the MS5525 sensor too
soon after requesting data and the result coming back would be garbage
 2017-12-27 11:05:54 -08:00
mirkix 4b1ec08eaf AP_BattMonitor: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix 0926802013 AP_Notify: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix 9b6a826b49 AP_HAL_linux: add new board PocketPilot 2017-12-27 16:01:55 +00:00
mirkix 0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
Pierre Kancir 8c8767e964 AP_InertialSensor: reduce QURT include scope 2017-12-27 15:13:30 +00:00
Pierre Kancir 14b5c8a6c4 AP_Baro: don't include vehicle specific baro by default 2017-12-27 15:13:30 +00:00
Peter Barker a35e86c2fd AP_SmartRTL: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 7646e09349 AP_OpticalFlow: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker e584a90c81 AP_Module: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 89d3289400 AP_Mission: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 5dc714bf5f AP_NavEKF3: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker 9c8466dc03 AP_NavEKF2: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker aea460df2c AP_FrSky: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker e15442355a AP_AHRS: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker ca4f25a78e AP_Terrain: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker fb3cba3867 AP_Mount: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker a4584431a2 AP_Landing: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker d1d5a484ce AP_ADSB: use GPS singleton 2017-12-27 00:58:02 +00:00
Peter Barker e0c586876b APM_Control: use GPS singleton 2017-12-27 00:58:02 +00:00
Hiroshi Takey (hiro2233) fb5b6f2169 AP_Airspeed: Updated Airspeed example. 2017-12-26 14:57:58 +00:00
Peter Barker dea15892dc AP_Volz_Protocol: use AP::serialmanager() 2017-12-21 04:35:11 +00:00
Peter Barker b3f5e807a6 AP_SerialManager: add AP::serialmanager() 2017-12-21 04:35:11 +00:00
Pierre Kancir 6728598099 AP_Rangefinder: don't include Bebop rangefinder by default 2017-12-21 04:13:09 +00:00
Pierre Kancir be96a27fa8 AP_NavEKF3: only report terrain estimator innovations with valid rng value 2017-12-18 22:51:46 +00:00
Pierre Kancir 171e80d8dc AP_NavEKF2: only report terrain estimator innovations with valid rng value 2017-12-18 22:51:46 +00:00
khancyr 2732226664 AP_AHRS: use direct assignation and correct some style 2017-12-18 22:43:59 +00:00
khancyr dae636b39e AP_AHRS: correct some constcorrectness 2017-12-18 22:43:59 +00:00
khancyr d89d496c8f AP_AHRS: make getter const 2017-12-18 22:43:59 +00:00
mirkix eecd8fcfa6 AP_HAL_Linux: Add VOLTAGE_SCALING for BeagleBone Blue 2017-12-19 09:17:06 +11:00
Andrew Tridgell 4ac49483c8 AP_Param: added support for embedded parameters 
use a block of flash to hold embedded parameters that can be changed
using apj_tool.py
 2017-12-18 11:14:59 +11:00
Peter Barker 738377c089 AP_Arming: remove airspeed arming check bits from non-plane vehicles 2017-12-16 11:08:35 +11:00
Peter Barker 0f94fde434 AC_Fence: get home distance directly from ahrs 2017-12-15 01:42:49 +00:00
Peter Barker 20e295c23a AC_Fence: check supplied location within fence rather than current loc 2017-12-15 01:24:13 +00:00
Peter Barker dff27ec506 AC_WPNav: correct call for getting location vector 
Function has been renamed and only takes a Vector2f
 2017-12-15 01:24:13 +00:00
Peter Barker 302e5c6871 AP_Common: have get_vector_xy_from_origin_NE take a Vector2f rather than 3f 
Also, rename it from get_vector_xy_from_origin_NED
 2017-12-15 01:24:13 +00:00
mirkix 26f3a62db7 AP_HAL_Linux: remove BBBmini from RCInput_PRU.cpp 2017-12-14 12:40:37 -08:00
Mark Whitehorn f57eab3482 AP_SerialManager: add Volz and Sbus protocols to param metadata 2017-12-14 19:27:02 +00:00
ChristopherOlson 569f55f5c6 AC_AttitudeControl:TradHeli - fix for alt_hold angle limiter active at hover collective in Traditional Helicopters 
add definition for max collective/throttle for helicopters that compensates for negative collective pitch range
and sets proper collective overhead before alt_hold angle limiter becomes effective
 2017-12-14 20:46:13 +09:00
Andrew Tridgell 1c503ee459 SRV_Channel: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell fd14dedcff DataFlash: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 15026c6898 AP_Volz_Protocol: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell d175fb2f18 AP_Terrain: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell b6ecce8329 AP_TECS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 003851a5c1 AP_SmartRTL: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 1cdbb09466 AP_ServoRelayEvents: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell dd489a0797 AP_SerialManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 580af4a69a AP_Scheduler: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell dec3a27d91 AP_SBusOut: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 076f7bc0cf AP_RSSI: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 9b4fef4d50 AP_RPM: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 16cd31b63a AP_Relay: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell e9b847b5ee AP_RCMapper: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell ffced7d591 AP_RangeFinder: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 7122cae589 AP_Rally: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell e798b38271 AP_Parachute: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 0d4dca0394 AP_OpticalFlow: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell cd51c71857 AP_Notify: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell c13eaf0c7f AP_NavEKF3: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 4d4e66d825 AP_NavEKF2: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 3d2c81ff05 AP_Mount: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell c72c1de99e AP_Module: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell a3e07f66a1 AP_Mission: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 1dac512567 APM_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 5f4680bf2c AP_LeakDetector: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 645508224f AP_Landing: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell ad99b04de7 AP_LandingGear: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 31092da426 AP_L1_Control: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 99499dece2 AP_InertialSensor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell d2c9e2719e AP_GPS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell c618a27ee0 AP_Frsky_Telem: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell f326377a5c AP_Compass: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 573a5bf3d0 AP_Camera: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell a4d2d79ce7 AP_BoardConfig: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell ca91edbbeb AP_Beacon: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell a4c56fcb82 AP_BattMonitor: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 68f8817e97 AP_Baro: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 8c1cf9affe AP_Airspeed: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 0ccaa5bcba AP_AHRS: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 6487a22acd AP_ADSB: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 85f9fecd24 AC_Sprayer: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 9ba8097502 AC_PrecLand: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 25c409d4a2 AC_InputManager: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 25b9a7e711 AC_Fence: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell d5c55e0dfe AC_Avoidance: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Andrew Tridgell 7a6ab4ac44 AP_AHRS: fixed a bug with startup ordering of SITL 
this fixes a crash that can happen with SITL
 2017-12-13 14:09:39 +11:00
Peter Barker 86fe1671c1 AC_Fence: fix comment 2017-12-13 10:04:50 +09:00
Peter Barker e8151a7ec1 AC_Fence: require home as well as origin for prearm checks 2017-12-13 10:04:50 +09:00
Peter Barker 1ecfdffa76 AC_Fence: methods to help populate SYS_STATUS 2017-12-13 10:04:50 +09:00
Peter Barker ac3f030a34 AC_Fence: factor out check_fence_alt_max 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker d04a4dd0f8 AC_Fence: factor out check_fence_circle 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker d379c7bbd9 AC_Fence: factor out check_fence_polygon 
NFC
 2017-12-13 10:04:50 +09:00
Peter Barker 5eeed442c8 AP_AHRS: correct comment 2017-12-13 10:04:50 +09:00
Peter Barker 518399c13a AC_Fence: stop looking at EKF filter status 
Fence has no business looking at what the filter status is.

Fence should only care whether it can currently get a position.
 2017-12-13 10:04:50 +09:00
khancyr 65373b85f0 AC_Fence: replace AP_InertialNav by AHRS 2017-12-13 10:04:50 +09:00
priseborough 3b32d583a9 AP_NavEKF2: Fix delta time use error 2017-12-12 11:39:38 +11:00
priseborough 440d361aff AP_NavEKF2: Limit range of delta times 2017-12-12 11:39:38 +11:00
Andrew Tridgell 6b30c9213a AP_NavEKF3: delay startup until IMU buffer is filled 
this prevents a vulnerability where the initial IMU data is processed
26 times (where 26 is the IMU buffer length)
 2017-12-12 11:39:38 +11:00
Andrew Tridgell 1f9a3dd1bd AP_AHRS: improved init attitdue in DCM 
this tries harder to get a good IMU sample for the initial attitude
estimate. I have seen cases of bad IMU data on startup and this makes it
much less likely
 2017-12-12 11:39:38 +11:00
Andrew Tridgell 97729a12f0 AP_NavEKF2: don't run IMU updates until buffer fills 
this prevents us using bad initial data multiple times. It fixes a bug
where the IMU may pause during EK2 initialisation
 2017-12-12 11:39:38 +11:00
Andrew Tridgell 39c206ca03 AP_InertialSensor: limit delta-time from INS 
limit delta-time to 2x average time

DEBUG CODE - DO NOT MERGE
 2017-12-12 11:39:38 +11:00
Andrew Tridgell a0af4af5b5 AP_InertialSensor: debugging code for EK2 bug 2017-12-12 11:39:38 +11:00
Randy Mackay 38145f9541 AP_InertialSensor: fix param docs for notch and log settings 2017-12-12 07:59:41 +09:00
Randy Mackay cabced82f1 AR_AttitudeControl: fix parameter descriptions 2017-12-11 17:01:18 +09:00
Michael Oborne 78f732c380 AR_AttitudeControl: fix parameter docs 2017-12-11 08:35:33 +09:00
Randy Mackay 744f4baf22 AR_AttitudeControl: add parameter description increment 2017-12-09 16:23:25 +09:00
Randy Mackay f00f4ce79b AR_AttitudeControl: fix get_desired_speed timeout 2017-12-09 16:23:22 +09:00
Randy Mackay 9b81c133f6 AP_HAL_PX4: fix compiler warning in UARTDriver 2017-12-09 12:18:49 +09:00
Randy Mackay 36c5f057ae AR_AttitudeControl: add get_desired_turn_rate lat_accel and speed 
for reporting use only
 2017-12-09 12:18:49 +09:00
Andrew Tridgell 30944f60e6 AP_SBusOut: fixed param doc name 2017-12-09 08:31:24 +11:00
Andrew Tridgell 051f30990c SRV_channel: fixed doc names of VOLZ and SBUS 
thanks to Mark for noticing
 2017-12-09 08:08:00 +11:00
Peter Barker c4734484e7 AC_Avoid: take an AP_AHRS in place of an AP_AHRS_NavEKF 2017-12-08 11:27:37 +09:00
Peter Barker 8a4ab685c7 AP_AHRS: implement get_hgt_ctrl_limit on base class 
If no limits are required false can be returned, so an trivial
implementation is possible
 2017-12-08 11:27:37 +09:00
Peter Barker 89e12163cd AP_AHRS: correct comment 2017-12-08 11:27:37 +09:00
Peter Barker c3eff57f60 AP_InertialNav: remove unused get_hgt_ctrl_limit 2017-12-08 11:27:37 +09:00
Peter Barker a1c982be4a AC_Avoid: work in metres to avoid extra work 2017-12-08 11:27:37 +09:00
Peter Barker 0fe45ef6b6 AC_Avoid: eliminate get_position and get_alt_above_home 2017-12-08 11:27:37 +09:00
Peter Barker 54010451bf AC_Avoid: check result of AHRS calls 
Work in metres to avoid computation
 2017-12-08 11:27:37 +09:00
khancyr b44ba29a05 AC_Avoidance: replace AP_InertialNav by AHRS 2017-12-08 11:27:37 +09:00
Andrew Tridgell 4289190654 HAL_PX4: added LIS3MDL on FMUv4 2017-12-08 09:49:25 +11:00
Mark Whitehorn b0e2f06a7a AP_Compass: add LIS3MDL probe for Pixracer 2017-12-08 09:49:25 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 9b2e48ce10 AP_GPS: Improve comments (NFC) 2017-12-05 10:44:58 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas fa4427fbce AC_AttitudeControl: Add AC_PosControl::get_bearing_to_target() method 2017-12-05 09:17:15 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 1a512609ac AC_WPNav: Use the get_bearing_cd() overloaded function provided by AP_Math instead 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas e13281ab2d AP_Math: add overloaded functions get_horizontal_distance_cm() and get_bearing_cd() (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 07c8d208bc AC_WPNav: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas ec1790dad9 AP_Math: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Guglie 4eaa1f17df SITL: fix pthread_setname_np to build on mac 2017-12-04 21:14:29 +11:00
Tom Pittenger da11241aa8 AP_HAL_SITL: add const 2017-12-02 09:17:27 +09:00
Patrick José Pereira bd1110f444 AP_JSButton: simplifies logic 
Less code make people happy

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2017-12-01 14:50:15 -08:00
Peter Barker e39e8359b6 GCS_MAVLink: tighten result of handle_preflight_reboot 2017-12-01 17:01:10 +00:00
Peter Barker 161e2145cb AP_InertialSensor: tighten type of simple_accel_cal result 2017-12-01 17:01:10 +00:00
Randy Mackay 82cd320bd0 AP_AHRS: add get_origin method to parent 2017-12-01 09:28:56 +09:00
Andrew Tridgell da4d3ebe2b HAL_SITL: fixed UART utils for cygwin and Linux 2017-12-01 08:02:48 +11:00
Tom Pittenger 6bdbe53024 AP_HAL_SITL: fix compile error for Windows/Cygwin builds 
termios2 not available on cygwin. This needs a re-think for cygwin. For now let's just hide it by letting it be declared empty by the virtual and totally bypass it in the cygwin build.
 2017-11-30 12:17:49 -08:00
Tom Pittenger 013035a4da AP_HAL_SITL: fix compile error for Windows/Cygwin builds 
Can not find "asm/termios.h"
 2017-11-30 12:05:56 -08:00
Tom Pittenger 760c6185e5 AP_HAL_SITL: remove SBUS debug code 2017-11-30 12:03:17 -08:00
Pierre Kancir c30642a348 AP_HAL_SITL: correct _unbuffered_writes usage 2017-11-30 10:36:54 -08:00
Mark Whitehorn b1b1c0218f AP_HAL_PX4: clean whitespace 2017-11-30 10:20:04 +11:00
Mark Whitehorn d9ce90ceb0 AP_SBusOut: fix typo in comment 2017-11-30 10:20:04 +11:00
Mark Whitehorn 8d70255b8b AP_SBusOut: turn off SBUS_DEBUG 2017-11-30 10:20:04 +11:00
Mark Whitehorn 5a417e3152 AP_HAL_SITL: support SBusOut 
add uart config methods
 2017-11-30 10:20:04 +11:00
Mark Whitehorn 644f5b75e6 AP_HAL_VRBRAIN: rename enable_sbus_out to enable_px4io_sbus_out 2017-11-30 10:20:04 +11:00
Mark Whitehorn 12ea8efa84 AP_HAL_PX4: support SBusOut 
add unbuffered writes and uart config
 2017-11-30 10:20:04 +11:00
Mark Whitehorn 66c4b7d986 AP_HAL: support SBusOut 
rename enable_sbus_out to enable_px4io_sbus_out
 2017-11-30 10:20:04 +11:00
Mark Whitehorn 3587d7f253 AP_SerialManager: add SBUS1 serial output support 2017-11-30 10:20:04 +11:00
Mark Whitehorn cca251c135 SRV_Channel: support SBusOut 2017-11-30 10:20:04 +11:00
Mark Whitehorn 94d4f068a8 AP_SBusOut: create library 2017-11-30 10:20:04 +11:00
Mark Whitehorn 560402bad4 AP_BoardConfig: clarify PX4IO SBUS enable message 2017-11-30 10:20:04 +11:00
Peter Barker 47f8ed7fab AP_GPS: set GPS_SAVE_CFG default to save GPS config as required 2017-11-29 00:58:43 -07:00
Andrew Tridgell 9677d570e9 AP_GPS: faster GPS lock 
use 9600 and 115200 first
 2017-11-29 00:58:43 -07:00
Andrew Tridgell 2c6593e35e AP_NavEKF3: fixed inverted function setInhibitGpsVertVelUse() 2017-11-29 09:47:14 +09:00
Andrew Tridgell 4019a167a9 AP_NavEKF2: fixed inverted function setInhibitGpsVertVelUse() 2017-11-29 09:47:14 +09:00
Grant Morphett f7db538220 APM_Control: Fixed the subparam indexs to start at 1 
AFAIK there is still a bug in ArduPilot where subparams should not start at index 0.  This is due to the way the index math and bit shifing works as it incorrectly offsets all 0 index params to 0. We allow 2 levels of sub params - 3 levels in total.  So params, sub params and sub sub params.  The 0 parameter in all those is unfortunately always references param[0].  So param[0] and subparam[0] and subsubparam[0] will reference the same parameter value.  Its why we always say start the index from 1 as the math and bitshifting then works correctly.

Yeah this is worded badly - hard to explain.
 2017-11-29 09:43:10 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 5a0ffe94d2 AP_Common: NFC spell in comments 2017-11-27 23:13:34 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 0ecb14361d AP_AHRS: NFC spell in comments 2017-11-27 23:13:34 +09:00
Randy Mackay b9a1621d38 AR_AttitudeControl: minor comment fix 
non-functional change
 2017-11-27 10:35:26 +09:00
Peter Barker 30355fa6d8 AP_Mission: provide short description for mission item types 2017-11-27 10:28:24 +09:00
Andrew Tridgell 9660973975 AP_Math: make crc_crc8 const 2017-11-27 10:15:07 +09:00
Leonard Hall bd284d9fd7 AC_PosControl: correct lean-angle-to-accel formula 
Thanks to @luweikxy for finding this issue!
 2017-11-24 09:12:00 +09:00
Leonard Hall e49d29f8cd AC_WPNav: protect against divide by zero 
This could occur if the spline origin and destination were the same location
In these cases we mark the vehicle as having reached the destination avoid all calculations
 2017-11-23 21:24:28 +09:00
Andrew Tridgell 917d9842c4 SITL: support AHRS_ORIENTATION in SITL 
this allows for tailsitters in RealFlight
 2017-11-23 14:26:11 +11:00
Andrew Tridgell ebcffcb0ac HAL_SITL: fixed console printf in SITL examples 2017-11-23 14:26:11 +11:00
Andrew Tridgell 3f226cd2b9 AP_Math: added from_rotation() method to Matrix3 
this is used to get a rotation matrix from a rotation enum
 2017-11-23 14:26:11 +11:00
Peter Barker 22f1b5ed6f TECS: support for units on fields 2017-11-23 10:40:30 +11:00
Peter Barker d68ba874d0 DataFlash: correct examples with units 2017-11-23 10:40:30 +11:00
Peter Barker b19f981c07 DataFlash: validate units and multipliers 2017-11-23 10:40:30 +11:00
Peter Barker 9896e23c36 DataFlash: Log_Write() fills unknown units with '?' 2017-11-23 10:40:30 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas 2e94673e4f DataFlash: keep the unit names consistent with Tools/autotest/param_metadata/param.py:33 2017-11-23 10:40:30 +11:00
Peter Barker a5442fb293 DataFlash: support for units on fields 2017-11-23 10:40:30 +11:00
Peter Barker 1e512338f9 AP_AirSpeed: clarify comment 2017-11-23 10:40:30 +11:00
Jacob Walser 46ac0e45aa AP_HAL_SITL: initialize rc inputs appropriately for ArduSub 2017-11-22 15:43:46 -05:00
Patrick José Pereira 28ff272017 SIM_Submarine: Solve problem when frame is above water level 
Fix bluerobotics/ardusub/issues/128

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
Co-Authored-By: jaxxzer <jwalser90@gmail.com>
 2017-11-22 12:38:14 -08:00
HeBin c056076e85 AP_InertialSensor: fix code style problem, delete useless codes 2017-11-22 10:20:00 -08:00
HeBin 1918b07705 AP_Notify: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin efbb030494 AP_InertialSensor: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin 0e1ce2a7fd AP_HAL_Linux: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin 895b5f34b8 AP_HAL: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
HeBin 26de6de848 AP_Compass: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Chinese66 700aaf2e8f AP_HAL: add delay to UART_test example 
For AC3.5 and higher version, serial uartA-USBconsole cannot work. Maybe the code before "setup" has been changed. Ensure that the uartA can be initialized
 2017-11-22 09:05:17 +09:00
Michael du Breuil 983a330cd5 AC_Fence: Remove unused duplicate methods 
The Vector2l methods completely duplicate the code of the Vector2f
methods, but aren't used anywhere. They are therefore subject to bitrot
and aren't adding any value. (Also shrinks the build by 8 bytes for some
reason, given that it's unused code I expected to see no difference in
binary size).
 2017-11-21 17:04:11 +09:00
Andrew Tridgell e0d383c986 AP_Volz_Protocol: add a 30% safety margin over baudrate 
we don't want to fill the buffer if we don't get full uart utilisation
 2017-11-21 14:10:54 +11:00
Guy Tzoler 7f68be9bdf SRV_Channel: adding Volz Support 2017-11-21 14:10:54 +11:00