Commit Graph

359 Commits

Author SHA1 Message Date
Iampete1 fd7a879c85 Plane: remove unused params 2021-09-08 17:21:23 +10:00
Hwurzburg 327f3a0803 ArduPlane: add option for man throttle center to be TRIM_THROTTLE 2021-09-07 10:02:26 +10:00
Iampete1 88f2f7ccae Plane: remove unused param OVERRIDE_SAFETY 2021-09-01 18:46:18 +10:00
TunaLobster d31f3eb4c5 Plane: Add TRIM_PITCH_CD FLIGHT_OPTIONS bits for GCS and OSD 2021-08-31 09:32:10 +10:00
Peter Barker bfe9208849 ArduPlane: add and use HAL_BUTTON_ENABLE 2021-08-25 19:03:42 +10:00
Andrew Tridgell d1d0ab41d6 Plane: added option to log PIDs at full rate
useful for tuning quadplanes
2021-08-10 10:13:36 +10:00
bugobliterator c8b2f009fd Plane: change class name from SITL::SITL to SITL::SIM 2021-08-05 07:25:31 +10:00
Andrew Tridgell f472da8e90 Plane: added ONESHOT_MASK parameter
after discussion with Paul on servo latency
2021-07-23 14:47:14 +10:00
Andrew Tridgell 1ae669bb01 Plane: added manual input expo for MANUAL, ACRO and TRAINING
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00
Andrew Tridgell c0d942af4c Plane: disable EKF3 default airspeed fusion by default
this fusion can cause problems with wind estimation, disable by
default for now
2021-07-22 18:20:45 +10:00
Andrew Tridgell 8e6abf5976 ArduPlane: replaced Pixhawk with more appropriate wording in docs 2021-07-22 07:48:12 +10:00
Peter Barker e3b8fc6646 ArduPlane: remove ability to use DCM as AHRS 2021-07-21 21:01:39 +10:00
Hwurzburg ac76a63931 ArduPlane: remove values metadata from log bitmask 2021-06-30 09:24:26 +09:00
Peter Barker 055e82276e ArduPlane: remove HIL support 2021-06-15 09:47:31 +10:00
Hwurzburg e958306343 Plane: Add options to USE_REVERSE_THRUST to cover all flight modes 2021-06-15 07:05:02 +10:00
Andrew Tridgell 0937d903a1 Plane: use HAL_EFI_ENABLED 2021-06-09 18:07:00 +10:00
vierfuffzig 9a538ba15b ArduPlane: fix advanced param metadata 2021-05-25 12:36:59 +10:00
Hwurzburg 09fb9a8e58 Plane: limit speed scaling in Autotakeoff wo AS sensor option 2021-04-20 09:07:09 +10:00
Andrew Tridgell 96059a6387 Plane: allow for AUTOTUNE_LEVEL==0 2021-04-15 06:57:16 +10:00
Andrew Tridgell a35d8e584d Plane: change param prefixes for roll/pitch controllers 2021-04-15 06:57:16 +10:00
Andrew Tridgell e5308db8c2 Plane: added FLIGHT_OPTIONS bit to enable yaw control in ACRO mode
this allows for yaw damper in ACRO, which is important on some
vehicles with no vertical stabilize

See
https://discuss.ardupilot.org/t/rudderless-split-rudder-flying-wing/69273/4
2021-04-15 06:22:29 +10:00
Iampete1 60d26723ae Plane: make TERRAIN_FOLLOW at AP_int32 bitmask, per mode option 2021-03-24 10:15:18 +11:00
Iampete1 660d301f9b Plane: chan param converison 2021-03-17 19:18:46 +11:00
Iampete1 cca5e62c89 Plane: move RST_SWITCH_CH to RCx_OPTION 2021-03-17 19:18:46 +11:00
Iampete1 7226a3a9dc Plane: move FBWA_TDRAG_CHAN to RC Options 2021-03-17 19:18:46 +11:00
Iampete1 5f555e5314 Plane: move CHUTE_CHAN to RC Options 2021-03-17 19:18:46 +11:00
Iampete1 eeab196d91 Plane: move RST_MISSION_CH to RC option 2021-03-17 19:18:46 +11:00
Stavros Korokithakis 29043d62e9 Add FLIGHT_OPTION to climb before RTL 2021-03-16 11:58:47 +11:00
Samuel Tabor ed48558985 ArduPlane: Correct description of KFF_THR2PTCH parameter. 2021-03-12 20:11:02 -08:00
Siddharth Purohit 1b8519ee53 ArduPlane: move underscore one layer down for GPS 2021-03-12 16:32:36 +09:00
James O'Shannessy 198ec9a678 ArduPlane: Fix use of nullptr when AC_FENCE configured as DISABLED
Parameter upgrade needs to grab singleton as the fence library may not be built in to plane.
2021-03-05 16:48:57 +11:00
James O'Shannessy 2c66e164d0 ArduPlane: Improvements to parameter upgrading between versions 2021-03-05 14:52:46 +11:00
James O'Shannessy af733b2f09 ArduPlane: Convert and remap old parameters 2021-03-05 14:52:46 +11:00
James O'Shannessy c316711351 ArduPlane: Add conversion from ArduPlane geofence param to AC_Fence param 2021-03-05 14:52:46 +11:00
James O'Shannessy aae092b88f ArduPlane: Remove all unused geofence capability
ArduPlane: Remove missed geofence logic
2021-03-05 14:52:46 +11:00
James O'Shannessy 17fb585bf1 ArduPlane: Add support for AC_Fence
ArduPlane: Remove some geofence logic from ArduPlane

ArduPlane: Refactor action and mode return implementation

ArduPlane: Use polyfence to find the return point.
2021-03-05 14:52:46 +11:00
Tom Pittenger c653ff880a Plane: extend Stream rates param count to match MAVLINK_COMM_NUM_BUFFER 2020-12-29 07:52:09 -07:00
Habibullah Oladepo 739fec001f Plane: Fix typos in Parameters.cpp 2020-12-13 10:51:38 -08:00
Andrew Tridgell cd2f2f96eb rename barometer parameters to BARO prefix 2020-12-08 13:22:17 +11:00
Andy Piper fa454da315 Plane: allow OSD for TX-only screens 2020-11-11 18:13:11 +11:00
Samuel Tabor 589382cbb4 Plane: Add THERMAL mode to Parameters.cpp metadata. 2020-09-25 11:34:48 -07:00
Samuel Tabor 10111f92d5 Plane: Rename SOARING_ENABLED to HAL_SOARING_ENABLED and don't compare to ENABLED. 2020-09-24 07:30:48 +10:00
Peter Barker 15372e9213 ArduPlane: replace '@User: User' with '@User: Standard' 2020-09-22 14:56:04 +10:00
Andy Piper c057be8ed1 Plane: conditionally compile ADSB support 2020-09-22 09:33:51 +10:00
Tom Pittenger db10ad2e54 Plane: update USE_REV_THR param description to include landing pattern 2020-09-17 07:31:43 -07:00
Hwurzburg 96f5e2a20a Plane: Update THR_FAILSAFE param metadata 2020-09-04 07:08:03 +10:00
Siddharth Purohit fb180fa431 Plane: move to using CANManager library 2020-08-19 17:31:09 +10:00
Andrew Tridgell 3c705d1c60 Plane: added THR_FAILSAFE=2 option
this allows for RC inputs to be ignored at low throttle, but won't
trigger failsafe. It is meant for users flying BVLOS missions, where
they want GCS failsafe enabled, but don't want RC failsafe, and want
to be sure that RC inputs will be ignored at low RC throttle values

Thanks to suggestion from Pompecukor
2020-08-07 14:01:20 +10:00
Andy Piper b649afe9e5 Plane: make mount/gimbal inclusion configurable per-board 2020-08-04 09:18:14 +10:00
Samuel Tabor 419f7c9998 Plane: Convert SOAR_ENABLE_CH to RCX_OPTION. 2020-07-21 09:38:04 +10:00
Paul Riseborough 97d7d563c4 ArduPlane: Improve parameter description for FWD_BAT_VOLT_MAX/MIN 2020-06-16 10:17:33 +10:00
vierfuffzig 147ebb74f4 Plane Parameters: fix THR_MAX param description
makes clear that thr is constrained in stabilized modes too unless passthrough is set, aligns with THR_MIN description.
2020-06-12 10:23:41 +10:00
Buzz 0f5177b291 Plane: Support a set of offboard MAVLink guided controls with rates
+ 3 rounds of fixes
2020-05-20 15:03:21 +10:00
Andrew Tridgell 8b21f5117a Plane: implement RTL_CLIMB_MIN parameter
this allows for an initial climb on RTL where roll is limited to
LEVEL_ROLL_LIMIT
2020-05-18 13:04:04 +10:00
Paul Riseborough 40cc5a5006 ArduPlane: Improve EKF failsafe in VTOL modes
Replicates Copter behaviour with a three step process if the EKF sustains a loss of navigation as detected by high GPS innovation test ratios:

1) Attempts a yaw reset using the GSF estimate if available
2) Attempts a lane switch
3) Falls back to a non-position mode
2020-05-14 10:40:48 +10:00
Peter Barker 8222b5db62 Plane: AP_Soaring no longer takes AHRS in constructor 2020-05-05 17:35:14 +10:00
Iampete1 3ded030fa8 Plane: compensate forward throttle for battery voltage drop 2020-05-05 09:46:41 +10:00
Michael du Breuil 37be15b3cd Plane: When stick mixing is disabled do not apply stick mixing to quadplane modes 2020-04-04 10:12:22 +11:00
Rishabh 30fd915312 Plane: Update CRASH_DETECT param 2020-02-25 11:02:43 +11:00
Peter Barker 19bc60b690 Plane: correct missing EFI parameter docs 2020-02-18 13:28:03 +11:00
Peter Barker e358677f85 Plane: allow NavEKFs to be compiled out 2020-01-21 11:53:18 +11:00
Peter Barker 9364181772 Plane: EKF objects have moved into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Andrew Tridgell a90c16e60e Plane: update for new SRV_Channels parameter conversion call 2020-01-14 14:23:11 +11:00
Henry Wurzburg 040a1b7fbe Plane:fix typo in ARSPD_FBW_MAX param description 2020-01-02 12:00:52 -07:00
Peter Hall 660c9a8a60 Plane: move from FLAP_IN_CHANNEL to RCx_Option 2020-01-01 08:11:01 +11:00
Andy Piper eca398e7a2 Plane: create generic vehicle management and move runcam to it 2019-12-30 13:02:04 +11:00
Peter Barker 33a0e55b32 Plane: correct duplicate button instance 2019-12-10 09:29:52 +09:00
Henry Wurzburg f2d8a42de8 Plane: correct crash_detect param description...no manual mode option bit exists 2019-11-23 17:39:06 -08:00
Andrew Tridgell 2b27cd2ce9 Plane: Add EFI Support 2019-11-17 20:10:54 +11:00
Peter Barker 2a22e7c8c5 Plane: adjust for renaming of RangeFinder files 2019-11-12 07:14:37 +08:00
Andrew Tridgell ff400243e0 Plane: added a new TAKEOFF flight mode
takeoff then circle in direction of takeoff
2019-10-17 12:19:43 +11:00
Henry Wurzburg 3e08e18202 Plane: add QACRO to flight mode list 2019-10-16 13:14:06 +11:00
Peter Barker 7e5a6f1895 Plane: avoid allocate a GCS_MAVLINK per mavlink channel 2019-08-14 18:25:43 +10:00
Michael du Breuil 2d81ad63f5 Plane: Convert ARMING_CHECK 2019-07-30 10:42:16 +10:00
Michael du Breuil c6f884221e Plane: Fix parameter description on values to not use the delimiter character 2019-07-23 09:29:48 +10:00
Michael du Breuil 183640789d Plane: Enable scripting parameters 2019-06-18 00:06:32 -07:00
Andrew Tridgell 08baabed4a Plane: modify FENCE_AUTOENABLE docs 2019-06-11 06:58:47 +10:00
Andrew Tridgell 5076058459 Plane: added FENCE_AUTOENABLE=3 option
this enables the fence when arming. If the vehicle is outside the
fence or it can't be enabled then arming fails
2019-06-11 06:58:47 +10:00
IamPete1 fb4b092917 plane: restore thr_min behaviour and update description 2019-04-23 09:39:45 +10:00
Tom Pittenger ade6281923 Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter 2019-04-03 17:46:50 -07:00
IamPete1 520f5f7894 Plane: add crow flap options paramiter 2019-04-04 09:18:11 +11:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Peter Barker 903be58436 Plane: add param conversion from MAG_ENABLE to COMPASS_ENABLED 2019-04-02 10:24:49 +11:00
Peter Barker 73707077b5 Plane: move enabled parameter into compass library 2019-04-02 10:24:49 +11:00
Tom Pittenger 7030dbc766 Plane: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Andrew Tridgell 3907466f9d Plane: added TKOFF_TIMEOUT parameter
this allows for a timeout on auto-takeoff. This can be combined with
other takeoff parameters to allow the user to abort a hand-launch
after the motor has started without GCS interaction.

The 4m/s threshold is a bit arbitrary. We could make that a parameter
in the future if it is needed
2019-03-18 14:48:08 +11:00
Andrew Tridgell cd1f21b806 Plane: removed some px4 specific code and docs 2019-02-27 20:32:37 +11:00
Tom Pittenger c422a21f55 Plane: ICE to use ahrs singleton 2019-02-05 15:34:08 +11:00
Nathan E 4d7fc66657 Update parameters.cpp per magicrub comments 2019-01-23 09:24:18 -07:00
Nathan E 448d19ddbb Update ArduPlane/Parameters.cpp 2019-01-23 09:24:18 -07:00
Peter Barker 40856fef56 Plane: remove vestiges of old PX4_MIXER code 2019-01-19 19:31:03 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Michael du Breuil ae6dc01cd5 Plane: Reset all storage when format version is incorrect 2019-01-08 10:35:37 +11:00
Michael du Breuil a78bce32c0 Plane: Allow users to force target airspeed in cruise or fbwb 2018-12-18 22:36:55 -08:00
Nikhil Upadhye d1e93bae83 Plane: adding new mode QAUTOTUNE
copter like autotune support for quadplanes and tailsitter in VTOL mode.

cleanup
2018-12-14 16:33:11 +11:00
Michael du Breuil f3a843ebf7 Plane: Fix a comma in bitmask that was breaking emitters 2018-12-11 10:24:40 +11:00
Andrew Tridgell 1d00d26b9e Plane: added parameters for crow flaps
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
Michael du Breuil 8ce0460daf Plane: Remove old parameter conversion 2018-11-10 18:58:54 +11:00
Eugene Shamaev 01178a75e9 Plane: added landing gear support 2018-11-09 14:35:14 +11:00
Andrew Tridgell d5c29fc57e Plane: use IOMCU mixing if available 2018-11-07 07:35:45 +11:00
Michael du Breuil 1c54fa0230 Plane: Remove old battery conversion that conflicts with new monitor 2018-11-06 10:18:39 +09:00
Michael du Breuil d9e02403e1 Plane: Fix battery failsafe parameter conversion 2018-11-06 10:18:39 +09:00
Andrew Tridgell 5ce418b4ea Plane: added FLIGHT_OPTIONS bit for disabling pitch up check in takeoff
some takeoff procedures use high pitch angles
2018-10-31 18:53:36 +11:00
Andrew Tridgell a00e06ea13 Plane: added TKOFF_ACCEL_CNT for multi-shake to start
this allows you to setup shake to start with a lower accel threshold,
but with multiple fwd/back movements needed.

This implements https://github.com/ArduPilot/ardupilot/issues/2221
2018-10-31 18:53:36 +11:00
Andrew Tridgell 009786a338 Plane: small update to failsafe documentation 2018-10-18 11:38:07 +11:00
Michael du Breuil 3aed07a83a Plane: Create a scripting object 2018-10-09 10:08:52 +11:00
Michael du Breuil b945970914 Plane: Fix FLIGHT_OPTIONS bitmask doc 2018-09-27 17:20:49 +01:00
Randy Mackay b61b25e5bf Plane: minor format fix to Parmeters.cpp 2018-09-11 19:34:39 +10:00
Randy Mackay 96d494c2e8 Plane: use parent AP_Arming rudder value 2018-09-11 19:34:39 +10:00
Michael du Breuil f150cae75a Plane: Allow center throttle to be trim airspeed in cruise 2018-09-11 09:07:00 +10:00
Peter Barker b574f4c1fc Plane: move support for inverted flight to rc-aux-switch
Functional change here; if someone de-configures the rc aux switch in
flight they will remain inverted
2018-09-07 09:07:40 +10:00
Michael du Breuil 8417bcc7d5 Plane: Add flight options bitmask 2018-08-28 09:40:53 +10:00
Andrew Tridgell c964a393c0 Plane: fixed RC_Channels parameter docs 2018-08-04 12:28:38 +10:00
Peter Barker 9ce02bc504 Plane: minimal support for inheritting from RC_Channel 2018-08-01 12:11:30 +09:00
Andrew Tridgell 1d675390ab Plane: make soaring an optional build feature
this disables soaring on px4-v2, saving 5k of flash

This is needed to consider pr #9042, which takes a lot of flash space
2018-07-30 13:09:15 +10:00
Lucas De Marchi 7f0d5ddf21 AP_Param: stop panic()'ing on unknown parameters
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.

On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.

This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Andrew Tridgell bc503cc600 Plane: moved OSD to top level params
this is to give lots of depth for OSD params (which will be very
complex)
2018-06-27 14:55:00 +10:00
Alexander Malishev 75bf6984f5 Plane: added OSD support 2018-06-27 14:55:00 +10:00
Michael du Breuil 44f2a652f3 Plane: Remove software type param 2018-06-05 09:14:12 +10:00
Andrew Tridgell c20351202d Plane: document TKOFF_THR_SLEW = -1 for takeoff 2018-04-26 15:59:06 +10:00
Michael du Breuil 7405bb7b85 Plane: Support new battery failsafes 2018-03-27 22:12:21 +01:00
night-ghost 98b8a61ca8 Plane: allow AP_Stats to be optional 2018-03-02 07:23:35 +11:00
David Ingraham a6aeebad4b Plane: Add support for AP_Gripper 2018-03-01 14:14:43 +11:00
David Ingraham 9419cc3b32 Plane: Fix param docs for quadplane attitude control
Docs aren't currently being generated for plane for AC_AttitudeControl.cpp. I believe this will fix that.
2018-02-20 16:38:27 +11:00
Andrew Tridgell 31d7d9f909 Plane: change airspeed parameter prefix
this makes for clearer parameter names with dual sensors
2018-01-16 07:14:20 +11:00
Tom Pittenger 512b327cd4 Plane: failsafe events to use enums instead of magical numbers : Non-functional change 2017-12-07 00:19:32 -08:00
Michael du Breuil 1a3ca43e86 Plane: Don't check FS_SHORT_TIMEOUT if it's disabled
Also renames the check_minimum_altitude() to reflect that it's only used
for FBWB.
2017-11-24 09:58:01 -08:00
Andrew Tridgell 271373e1e8 Plane: added a not on min slew rate for throttle 2017-11-13 10:29:46 +11:00
Andrew Tridgell 126d5ce5d4 Plane: re-implement MIXING_OFFSET
this was lost in the conversion of SRV_Channels
2017-11-04 09:34:22 +11:00
Andrew Tridgell 6bfed07eae Plane: updated USE_REV_THRUST docs 2017-08-30 08:46:53 +10:00
Michael du Breuil 8630037fd7 Plane: Parameterize the home altitude reset conditions 2017-08-29 13:09:46 -07:00
Andrew Tridgell d541ac509f Plane: removed TRIM_RC_AT_START parameter
this option caused a lot more problems than it solved, and is buggy
2017-08-29 07:35:49 +10:00
Peter Barker 2861c1d06a Plane: add ArduSub to list of SYSID_SW_TYPE 2017-08-24 19:50:38 +09:00
Peter Barker 1a665280e9 Plane: remove CLI 2017-08-14 10:23:50 +09:00
Andrew Tridgell 99df31f6ec Plane: fixes from review
thanks Francisco
2017-08-01 08:25:32 +10:00
Andrew Tridgell cff692ca48 Plane: implement MANUAL_RCMASK
this replaces the functionality of the old "with input"
aileron/elevator functions, but in a much more flexible way. It means
that people who want to fly in MANAUL mode will have the ability to
have full control of trims and mixing using transmitter mixers if they
need that functionality
2017-08-01 08:25:32 +10:00
Andrew Tridgell 0266168e69 Plane: removed old elevon and vtail mixers
now only use the function based mixing, and auto-convert on startup
2017-08-01 08:25:32 +10:00
Eugene Shamaev b95ebadf8b ArduPlane: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Andrew Tridgell 51b39ea3a1 Plane: removed ancient "mix_mode" type elevon mixing
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00
Andrew Tridgell 725244ff8a Plane: implement new TRIM_AUTO functionality
this fixes TRIM_AUTO for new scaled output approach to servo functions
2017-07-03 11:17:42 +10:00
Andrew Tridgell c9e4423997 Plane: re-implement flaperons
implement as scaled output instead of PWM output

this will break some peoples setups, but gives much easier setup and
more consistent behaviour
2017-07-03 11:17:42 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas ccee841578 Plane: NFC SYS_NUM_RESETS is a read-only variable 2017-06-07 19:53:03 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 14b214eb9b Plane: remove FS parameters default values macros.
They just add an un-necessary level of indirection in the code. The parameters are run-time configurable now.
2017-06-07 17:46:39 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 405e0bb9d9 Plane: Add missing @RebootRequired: True 2017-05-27 01:55:55 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 2f5f8eb323 Plane: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Mark Whitehorn 7679b758b0 Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter
controls rudder to differential thrust mixing in FW mode
2017-04-06 08:29:44 +10:00
Andrey Kolobov 35d406aeab Plane: added a soaring controller to Arduplane 2017-03-14 08:53:10 +11:00
Michael du Breuil cf10b7b841 Plane: Add support for landing PID's and servo control 2017-03-02 12:38:59 +11:00
Randy Mackay eb746eaeef Plane: fix SYSID_ENFORCE parameter description 2017-02-28 15:08:17 +09:00
Andrew Tridgell 0fc04b0158 Plane: setup plane frame type parameter flags 2017-02-14 19:50:01 +11:00