Randy Mackay
55e7e1eb3e
Copter: allow HYBRID to be disabled to save flash
...
Hybrid flight mode costs 4.5k of flash which currently puts us over the
limit for APM1 and APM2 unless optical flow or other features are
disabled
2014-04-23 15:27:05 +09:00
Ju1ien
f8e8d4024d
Copter: Hybrid's max brake angle to 30deg
2014-04-23 14:59:53 +09:00
Randy Mackay
f467d7bc20
Copter: add Hybrid parameters
2014-04-23 14:59:25 +09:00
Randy Mackay
5fc071f5f9
Copter: restore SITL to run at 100hz
2014-04-21 21:46:22 +09:00
Randy Mackay
8ac14023b4
Copter: set main loop rate from CPU class
...
Previously this was determined by the board
2014-04-21 13:32:00 +09:00
Andrew Chapman
fa3732ac6d
Copter: integrate AP_Rally
2014-04-19 15:00:23 +09:00
Emile Castelnuovo
9e31f032c2
Copter: added VRBRAIN board #includes and #defines
2014-04-08 16:19:20 +10:00
Randy Mackay
ff32b27272
Copter: integrate parachute lib
2014-04-07 13:36:44 +09:00
Andrew Tridgell
640b64f5e4
Copter: convert to new GPS API
2014-04-01 06:38:24 +11:00
Jonathan Challinger
2601ac9959
Copter: Remove 80m altitude limit on RTL
2014-03-31 20:34:19 +09:00
Andrew Tridgell
3de574e5dc
Copter: disable GPS2 in HIL
2014-02-27 08:16:20 +11:00
Andrew Tridgell
37394b30ee
Copter: added support for 2nd GPS
2014-02-26 09:40:29 +11:00
Randy Mackay
00913ffe1b
Copter: throttle rate to simple P controller
...
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay
aab9b30bf6
Copter: replace APM_PI with AC_P
...
Saves about 90bytes of RAM
2014-02-15 06:09:08 +11:00
Randy Mackay
ea1158a9d5
Copter: remove unused config
2014-02-15 05:27:47 +11:00
Randy Mackay
aec67cd3df
Copter: integrate control_autotune
2014-02-15 05:27:44 +11:00
Randy Mackay
ef666c73ab
Copter: remove Position mode
2014-02-15 05:27:42 +11:00
Robert Lefebvre
c561d6bb9e
Small comment change.
2014-02-15 05:27:42 +11:00
Randy Mackay
2253cf9769
Copter: run main loop at 400hz for pixhawk
2014-02-15 05:27:33 +11:00
Andrew Tridgell
0a3476bbf1
Copter: change to new board_voltage() API
2014-02-14 21:50:59 +11:00
Randy Mackay
dee5fb212a
Copter: remove dup definition of FRAME_ORIENTATION
...
Ideally the frame orientation parameter should be moved to the motors
class
2014-01-21 21:44:17 +09:00
Randy Mackay
a9f1a2ee5e
Copter: disarm on land even if pilot throttle not zero
...
default behaviour remains as before, this is an compile time option only
2014-01-15 11:31:00 +09:00
Randy Mackay
a3527ade61
Copter: move EARTH_FRAME definition to defines.h
...
defines.h is for defining enumerations and other unchanging values while
config.h is for changeable values like parameter defaults, enabling or
disabling sensors.
2014-01-14 21:53:13 +09:00
Randy Mackay
138c2803be
Copter: combine NTUN and INAV dataflash msgs
2014-01-13 22:00:11 +09:00
Randy Mackay
5e0ddd299f
Copter: disable OPTFLOW for SITL
2014-01-13 17:11:27 +09:00
Randy Mackay
61f319ce38
Copter: disable OPTFLOW for PX4/Pixhawk
2014-01-13 12:02:03 +09:00
Randy Mackay
b3d20bb8aa
TradHeli: Drift mode to use heli manual throttle
2014-01-10 11:06:06 +09:00
Robert Lefebvre
531a9f4f25
TradHeli: disable AutoTune for Tradheli compile
...
We need the flash space, and this probably won't work for tradheli anyway since tradheli needs most of the control from Feedforward rather than P term. And D-term is very very bad.
2014-01-10 10:50:09 +09:00
Randy Mackay
9f2f44f0f6
Copter: integrate shrunken optflow
2014-01-09 12:31:53 +09:00
ctech4285
2b5d8aa5b7
Copter: integrate EPM library
2013-12-17 15:36:42 +09:00
Randy Mackay
c7dc351609
Copter: remove unnecessary MPU6K filter definition
...
This should also help kick off the AC3.1 rebuild
2013-12-15 11:01:31 +09:00
Randy Mackay
2a61053634
Copter: reduce default logging for SITL
2013-12-12 22:19:12 +09:00
Randy Mackay
58788d2934
Copter: increasd default logging for PX4, Pixhawk
2013-12-05 16:04:52 +09:00
Randy Mackay
2ba233942d
Copter: pre arm mag offset limit to 600 for PX4
2013-12-03 23:23:26 +09:00
Randy Mackay
0cda3c9a71
Copter: reduce SONAR_GAIN to 0.8 (was 2.0)
2013-12-01 16:25:47 +09:00
Robert Lefebvre
dbbe0f960a
Copter: remove LED_ON/OFF defines
2013-11-30 18:20:58 +09:00
Randy Mackay
59cea4b88c
Copter: remove CopterLED from main code
2013-11-30 18:20:55 +09:00
Randy Mackay
10d6a9a34e
Copter: replace Log_Write_Motors with Log_Write_RCOU
2013-11-27 20:18:18 +09:00
Randy Mackay
af657d58b9
Copter: RCIN dataflash logging
2013-11-27 16:46:25 +09:00
Andrew Tridgell
9c812d5028
Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
2013-11-26 13:05:32 +11:00
Randy Mackay
87127f0ab8
Copter: allow battery failsafe to trigger RTL
2013-11-16 14:46:57 +09:00
Randy Mackay
bc1e06757b
Copter: allow GPS failsafe to trigger AltHold
...
FS_GPS_ENABLE parameter accepts two new options, 2=AltHold,
3=LandEvenFromStabilize.
If set to 3 the GPS failsafe will trigger and LAND even from manual
flight modes like Stabilize and ACRO. This is useful for users who want
to ensure their copters can never stray outside the circular fence (the
fence only triggers when it knows it is outside the bounds, and it can't
know this if it has no GPS)
2013-11-16 13:55:59 +09:00
Randy Mackay
8c9ab50ba2
TradHeli: restore CC_COMP and PIRO_COMP
2013-11-15 22:58:43 +09:00
Randy Mackay
0f67e25d37
TradHeli: set throttle_min to zero by default
2013-11-15 22:58:38 +09:00
Randy Mackay
c9c803ffd4
TradHeli: move STAB_COL_MIN to main parameter list
2013-11-15 22:58:32 +09:00
Randy Mackay
633e91b7d4
Copter: initialise roll, pitch, yaw modes to stabilize
...
This fixes a bug in which the stabilize throttle controller would be
non-tilt compensated until the user switched to another flight mode and
back again
2013-11-15 22:57:56 +09:00
Randy Mackay
ae87759e6d
TradHeli: add THROTTLE_MANUAL_HELI
...
Move check_dynamic_flight to run as scheduled task
2013-11-15 22:57:53 +09:00
Andrew Tridgell
6b1f59372c
Copter: show git and firmware version in tlog
2013-11-09 10:09:20 +11:00
Randy Mackay
620109d894
Copter: formatting fix to config.h
2013-11-03 12:57:02 +09:00
Robert Lefebvre
8868af7c2f
TradHeli: Change default Auto-Yaw to Yaw Look Ahead
...
This leads to smoother flight in Auto modes, particularly with fast waypoints.
2013-11-03 12:56:57 +09:00
Jason Short
520a535c21
Copter: TOY mode updates
2013-11-02 21:34:48 +09:00
Randy Mackay
babc54ec60
Copter: default Ch7 to DO_NOTHING
...
Ch7/Ch8 Save_WP feature triggers when switch is brought high (instead of
low) to be consistent with other aux features
2013-11-01 11:42:33 +09:00
Randy Mackay
8386b658e9
Copter: add ANGLE_RATE_MAX param
...
Limits the maximum rotation rate requested by the angle controller which
is used in stabilize, loiter, rtl and auto flight modes
2013-10-29 11:27:05 +09:00
Randy Mackay
9df7185075
Copter: remove unused #defines from config.h
2013-10-28 12:37:41 +09:00
Randy Mackay
f52c6add89
Copter: reenable optical flow by default
...
correct optflow test compile error
2013-10-23 20:42:03 +09:00
Randy Mackay
6b9b5c5617
Copter: pre-arm check speed is less than 50cm/s
2013-10-20 21:56:00 +09:00
Randy Mackay
d2bbc06502
Copter: allow throttle deadband to be redefined in APM_Config.h
2013-10-13 20:41:11 +09:00
Randy Mackay
0e740bd4e1
Copter: enable AUTOTUNE for mission planner build
2013-10-13 11:57:50 +09:00
Randy Mackay
6876107a15
Copter: autotune disables rate output from stab controller
2013-10-13 11:56:01 +09:00
Randy Mackay
8d1085feea
Copter: pre-arm expects mag len of 330 for APM1 (was 530)
2013-10-09 14:10:16 +09:00
Andrew Tridgell
6145924481
Copter: switch Linux to L3G4200D ins driver
2013-10-08 11:50:54 +11:00
Randy Mackay
ba92c4891a
Copter: make AutoTune a compile-time option
2013-10-04 15:50:50 +09:00
Randy Mackay
dab4f032f9
Copter: integrate BattMonitor
2013-10-03 11:16:28 +09:00
Andrew Tridgell
3665bec26d
Copter: fixed build for Linux
2013-09-28 22:04:16 +10:00
Randy Mackay
a53d28e018
Copter: remove support for dmp ahrs
2013-09-27 10:42:49 +09:00
Andrew Tridgell
566eaf7d41
Copter: fixed flymaple build with copterleds
2013-09-27 10:32:22 +10:00
Andrew Tridgell
a0b6481dfd
Copter: removed SMACCM support
2013-09-26 22:38:31 +10:00
Randy Mackay
2c96ed3f22
Copter: disable optical flow
...
This at least allows ArduCopter to be compiled with arduino until we
find larger flash savings
2013-09-24 21:59:19 +09:00
Andrew Tridgell
3378c7901a
Copter: added support for the flymaple board
2013-09-24 13:51:28 +10:00
Andrew Tridgell
91315715fe
Copter: removed CONFIG_PUSHBUTTON
...
not used anywhere any more
2013-09-23 18:10:22 +10:00
Andrew Tridgell
754bdbd25f
Copter: use new usb_connected() HAL function
2013-09-19 16:24:23 +10:00
Randy Mackay
65adb78f31
Copter: increase default battery capacity to 3500mAh
2013-09-15 11:54:07 +09:00
Randy Mackay
653a5036ae
Copter: #define for initial altitude jump during take-off
...
Developers can add a line like to APM_Config.h to reduce the initial
jump when taking off in Loiter or AltHold flightmodes:
#define ALT_HOLD_TAKEOFF_JUMP 0
2013-09-12 22:31:42 +09:00
Randy Mackay
e985253f1a
Copter: integrate notify
2013-08-30 13:01:35 +10:00
Randy Mackay
7c78936bc5
Copter: land by default at end of RTL
2013-08-30 10:34:23 +09:00
Randy Mackay
81074ebb3c
Copter: update Y6 defaults
2013-08-28 13:05:01 +09:00
Randy Mackay
d8eb7fb82f
Copter: remove x100 from IMAX definitions
2013-08-19 22:38:34 +09:00
Randy Mackay
2696e160e6
Copter: surface tracking improvement
...
Separate correction speeds for pilot input vs altitude-above-ground
errors to allow slower correction to sonar signals.
Change SONAR_GAIN parameter to be altitude error -> desired speed. This
means it should be set 10x larger than before.
Replace hard-coded sonar cut-off percentage of 70% with
SONAR_RELIABLE_DISTANCE_PCT.
Reduce sonar cut-off percentage to 60%.
Add desired sonar altitude to dataflash log's CTUN message.
2013-08-19 09:52:59 +09:00
Randy Mackay
d000967a76
Copter: pre-arm check for gps hdop < 2
2013-08-15 13:06:36 +09:00
Randy Mackay
6969ab573d
Copter: configurable max lean angle
...
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
2013-08-11 12:53:22 +09:00
Randy Mackay
5049595a2c
Copter: SPORT mode to use alt hold
2013-08-10 15:42:02 +09:00
Randy Mackay
d0dc5813cf
Copter: move CIRCLE_RADIUS definition
2013-08-07 14:03:28 +09:00
Randy Mackay
74fb500efe
Copter: integrate AC_Sprayer
2013-08-05 21:12:23 +09:00
Randy Mackay
49dbdce89c
Copter: split ACRO_P into ACRO_RP_P and ACRO_YAW_P
2013-08-05 21:05:00 +09:00
Randy Mackay
21e523b9ac
Copter: Acro trainer separated into limited and leveled
2013-08-05 21:04:53 +09:00
Randy Mackay
e32342163d
Copter: rename ACRO variables
2013-08-05 21:04:50 +09:00
Randy Mackay
65276d360b
Copter: SPORT to use YAW_HOLD
2013-08-05 21:04:44 +09:00
Randy Mackay
39ab4f62ef
Copter: add SPORT mode
2013-08-05 21:04:41 +09:00
Randy Mackay
9672742b42
Copter: bug fix to look_ahead_yaw
...
Fix received from David Dewey
Was incorrectly using the direction instead of heading when deciding
whether to point forward or not. Reduced YAW_LOOK_AHEAD_MIN_SPEED to
1m/s because bug meant it was nearly always pointing forward and 10m/s
(the old value) seemed too high
2013-08-01 14:12:55 +09:00
Leonard Hall
64ce9b017d
Copter: Body frame ACRO upgrade
2013-07-11 17:53:25 +09:00
Randy Mackay
ac5d925115
Copter: revert Loiter Pos P to 1.0 (was 0.8)
2013-07-11 12:20:31 +09:00
Randy Mackay
1590a5d58a
Copter: increase Yaw Rate I 0.02
2013-07-11 12:20:29 +09:00
Randy Mackay
d77f7bc803
Copter: default Loiter Pos P to 0.8 (was 0.2)
2013-07-11 08:13:17 +09:00
Andrew Tridgell
c544a076ca
Copter: enable camera logging by default
...
these messages only happen on user defined camera triggering, so
should be low rate
2013-07-10 12:24:02 +10:00
Randy Mackay
45f47de98d
Copter: reduce default Loiter Pos P to 0.2 (was 1.0)
2013-07-07 16:00:09 -10:00
Randy Mackay
404cd5f3da
Copter: rename g.pid_throttle to g.pid_throttle_rate
...
Small code clean-up to make throttle rate controller's pid more obvious
2013-06-30 00:04:21 -10:00
Robert Gayle
917edcab11
Copter: added FS_THR_ENABLED_ALWAYS_LAND (=3) option: don't attempt RTL, just land
2013-06-27 10:19:38 -10:00
Andrew Tridgell
76d1791073
Copter: CONFIG_RELAY is not used
2013-06-25 12:47:07 +10:00
Randy Mackay
cd30103b76
Copter: increase default CIRCLE_RATE to 20deg/sec
2013-06-19 12:40:33 +09:00
Randy Mackay
069bd17928
Copter: reduce default AltHold P to 1.0 (was 2.0)
...
This helps reduce jumpiness due to althold feed forward
2013-06-16 15:32:25 +09:00
Randy Mackay
13c41e74f2
Copter: reduce pre-arm board voltage check to 4.3V
2013-06-02 20:47:58 +09:00
Olivier-ADLER
735406fa77
Copter : POSITION_HOLD mode -> allow user position control
2013-06-02 11:49:18 +09:00
Randy Mackay
1722e438d8
Copter: pass alt hold gain to WP_Nav library
2013-05-31 21:04:10 +09:00
Randy Mackay
1807840d4f
Copter: fixed comments re mag field pre-arm check
2013-05-31 12:28:04 +09:00
Randy Mackay
7b50ecc73c
Copter: pre-arm check for mag field length
2013-05-31 12:23:19 +09:00
Randy Mackay
a1821c89e7
Copter: pre-arm check for board voltage < 5.8V
2013-05-31 11:31:27 +09:00
Randy Mackay
c3d21a457f
Copter: add pre-arm board voltage check
...
Copter will not arm unless board voltage is over 4.5V
2013-05-28 21:50:31 +09:00
Randy Mackay
cdcf442f55
Copter: enable GPS failsafe by default
2013-05-27 11:25:37 +09:00
Randy Mackay
9fdab5e8fe
Copter: remove unused AUTO_SLEW_RATE parameter
2013-05-17 16:09:17 +09:00
Randy Mackay
38239c652a
Copter: ch8 aux switch
...
Ch8 can be used as an aux switch like ch7. Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
2013-05-17 14:42:28 +09:00
Randy Mackay
566daf883a
Copter: remove unused MODE bit from LOG_BITMASK
...
We always log the mode so no need for this bit
2013-05-17 12:26:42 +09:00
Randy Mackay
1426f40319
Copter: remove unused JDrones motor PID overrides
2013-05-17 12:05:20 +09:00
Randy Mackay
e843bf3dfd
Copter: bug fix for POSITION mode throttle
...
Was using alt-hold throttle controller instead of manual throttle
controller
2013-05-14 11:56:09 +09:00
Randy Mackay
a2e298bbfc
Copter: change to default RTL yaw behaviour
...
We will not point the nose home for RTL but will point the nose for all
other waypoints
2013-05-14 11:52:39 +09:00
Andrew Tridgell
0d027b7a23
Copter: updates for new compass API
2013-05-02 12:48:14 +10:00
Randy Mackay
bab9fa25e5
Copter: add GCS failsafe
2013-04-29 21:30:22 +09:00
Randy Mackay
58d1da2d80
Copter: integrate AC_Fence in place of limits
...
Lesser functionality than limits but saves more than 150 bytes and it
works
2013-04-27 11:14:07 +09:00
Randy Mackay
94d4ecef11
Copter: reduce throttle rate D to zero
2013-04-21 16:28:07 +09:00
Bill Bonney
36041bb9ff
Copter: Enable CURRENT logging by default to dataflash
2013-04-21 07:25:34 +10:00
Randy Mackay
745df9b13c
Copter: add SONAR_GAIN to tune reaction to sonar
...
Some users report the response to sonar is too violent, this allows that
reaction to be reduced
2013-04-20 15:58:36 +09:00
Randy Mackay
a53e5f747b
Copter: add fourth yaw behaviour, look-at-home
...
Added get_wp_yaw_mode to remove duplication of checks of the
WP_YAW_BEHAVIOR parameter
2013-04-20 15:36:24 +09:00
Randy Mackay
37abfdc65a
Copter: make CIRCLE_RATE a tunable parameter
...
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
2013-04-20 12:03:55 +09:00
Randy Mackay
18c1373847
Copter: remove unused AUTO_VELZ defaults
...
These have now moved to AC_WPNav
2013-04-18 14:57:08 +09:00
Randy Mackay
82989d85f2
Copter: remove unused #defines
2013-04-16 22:34:12 +09:00
Randy Mackay
0663da7c9e
Copter: loiter rate IMAX to 4m/s/s and D to zero
2013-04-16 22:28:18 +09:00
Randy Mackay
629d23b7e2
Copter: remove WP_SPEED and WP_RADIUS parameters
...
AC_WPNav library has equivalent params with very similar names
2013-04-14 13:27:37 +09:00
Randy Mackay
366616e32c
Copter: reduce default loiter PIDs
2013-04-14 10:39:28 +09:00
Randy Mackay
1516972eaa
Copter: add panorama to CIRCLE mode
...
Yaw will slowly rotate if CIRCLE_RADIUS is set to zero
Circle center is projected forward CIRCLE_RADIUS from current position
and heading
2013-04-14 10:38:01 +09:00
Randy Mackay
fc0c451b69
Copter: remove #ifdef checks for Atmega1280
2013-04-05 22:48:10 +09:00
Randy Mackay
a9eb626cb8
Copter: update default Rate Yaw P to 0.20 (was 0.25)
2013-04-01 11:49:50 +09:00
Randy Mackay
36834e77b5
Copter: remove support for CLI Slider
2013-03-18 14:07:04 +09:00
Randy Mackay
597a4b912a
Copter: fix to allow building HIL_MODE_SENSORS
2013-03-18 13:41:52 +09:00
Randy Mackay
d1344e8c39
Copter: remove #define for CROSSTRACK_GAIN
...
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
2013-03-17 16:56:18 +09:00
Randy Mackay
1b6fcad90a
Copter: remove tilt compensation parameter
...
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
2013-03-17 16:53:32 +09:00
Randy Mackay
fdcb78ccf7
Copter: leonard's smoother alt-hold transition
...
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
2013-03-17 13:24:49 +09:00
Randy Mackay
150046f2b8
Copter: GPS Failsafe implemented
...
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
2013-03-16 17:27:46 +09:00
Randy Mackay
a73f50494c
TradHeli: remove duplicate RC_FAST_SPEED definition
2013-03-04 23:45:23 +09:00
Randy Mackay
33bd984a91
Copter: remove unused input_voltage parameter
2013-03-03 23:23:54 +09:00
Randy Mackay
d6ff5ae261
Copter: add roll-pitch slew for auto modes
...
Added reporting of roll, pitch inputs for ACRO, AUTO
2013-02-24 14:42:04 +09:00
Randy Mackay
e297ba7d18
Copter: update default loiter gains for inertial nav
2013-02-24 14:42:00 +09:00
Randy Mackay
cbde042ec5
Copter: remove non-inav loiter and wp controllers
...
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
2013-02-24 14:41:52 +09:00
Randy Mackay
609676e26c
Copter: add logging of compass values
...
Removed rarely used ITERM because we didn't have enough bits in the log
mask
2013-02-24 14:41:48 +09:00
Randy Mackay
67c69a19ee
Copter: remove baro-only alt hold
...
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
2013-02-24 14:41:29 +09:00
Randy Mackay
fcf102b2cf
Copter: inertial nav waypoint controller
...
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
2013-02-24 14:41:09 +09:00
Randy Mackay
8e4c9518ea
Copter: increase low voltage check to 10.5v
...
Change requested by Rob Lefebvre and Richie Wilson
2013-02-23 00:36:51 +09:00
Andrew Tridgell
4c7a1a1806
Copter: change PX4 main baud rate back to 115200
...
we now use USB console
2013-02-22 07:04:23 +11:00
Randy Mackay
06a71af12f
Copter: THR_MID used to scale manual throttle
2013-02-01 22:37:16 +09:00
Randy Mackay
ce370bab0c
Copter: rename CUR and CURR to CURRENT for logging
...
Based on user complaint that enable/disable was using CUR while message
was appearing as CURR
2013-01-26 17:20:41 +09:00
Randy Mackay
b74fe10aa9
Copter: set each flight mode's nav_mode
...
Allow ACRO flight mode's roll, pitch, yaw, throttle and nav mode to be
overwritten
2013-01-25 15:57:55 +09:00
Andrew Tridgell
f303554259
Copter: run serial0 at 57600 on PX4
2013-01-22 09:50:22 +11:00
Robert Lefebvre
dde713aaa5
Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this.
2013-01-20 21:32:00 +09:00
Andrew Tridgell
580abf1106
Copter: fixed PX4 mag orientation
2013-01-17 17:23:34 +11:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Randy Mackay
fef7569dee
Copter: added experimental LOITER_REPOSITIONING #define to config.h
...
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
2013-01-14 13:34:14 +09:00
Randy Mackay
9ad6f711f8
ArduCopter: replace FS_THR_RTL_MIN_DISTANCE with wp_radius
...
This effectively means that an RTL kicked off by a failsafe will
immediately switch to LAND mode only if within 2 meters. Previously the
radius was much wider (15m).
2013-01-13 20:00:47 +11:00
Randy Mackay
12f885c33c
ArduCopter: disable ITERM logging by default
...
This message takes 1ms to write and we are running over our limits on
some loops.
2013-01-13 20:00:39 +11:00
rmackay9
21b6c78d12
ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes
...
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
2013-01-13 19:51:47 +11:00
Randy Mackay
87627d883b
ArduCopter: use new logging method for remaining packet types
...
Additional changes include renaming RAW dataflash type to IMU
2013-01-13 00:17:44 +09:00
James Bielman
7827a4a54a
ArduCopter: Add AP_HAL_SMACCM support.
...
- Added default configuration to "config.h".
- Added main function to run under FreeRTOS with HWF4.
2013-01-09 11:19:51 -08:00
James Bielman
ab37f833db
MS5611: Fix CONFIG_MS5611_SERIAL definitions.
...
- Make sure the values are defined as integers. We were always using
SPI rather than using I2C when desired.
2013-01-09 11:19:51 -08:00
Andrew Tridgell
c48714be16
Copter: enabled PX4 sensors
2013-01-05 20:39:31 +11:00
James Bielman
264db3670e
AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C.
...
- Update ArduCopter and ArduPlane modules to pass the correct serial
driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
2013-01-03 13:48:06 -08:00
Andrew Tridgell
94e3322e24
Copter: fixed build on px4
2013-01-02 22:09:02 +11:00
rmackay9
9b2956b377
ArduCopter: increase throttle rate P to 6.0 (was 1.0) and alt hold P to 2.0 (was 1.0)
2013-01-02 09:55:37 +11:00
rmackay9
d400e5040b
ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner
2013-01-02 09:55:37 +11:00
rmackay9
e850ab7ccd
ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes
2013-01-02 09:24:31 +11:00
rmackay9
5526ca204c
ArduCopter: on throttle failsafe, only initiate RTL if we are at least 15m from home
2013-01-02 09:22:51 +11:00
Robert Lefebvre
6e64b1b357
ACM: Precision Loiter RePositioning code.
...
Protected behind a #define
2013-01-02 09:19:39 +11:00
rmackay9
e6519330f4
ArduCopter: remove unused rc_override variables to save 21 bytes
2013-01-02 09:19:17 +11:00
rmackay9
34e18ae12a
ArduCopter: increase accel based throttle PIDs and add D term to rate based throttle
2013-01-02 09:19:17 +11:00
Robert Lefebvre
9605bd8ee1
ACM: Trying to set a default MPU6K filter rate of 10Hz for TradHeli. Doesn't Work.
2013-01-02 09:14:55 +11:00
rmackay9
d8e3d5c10c
ArduCopter: allow RTL's yaw mode to be overridden with a #define in APM_Config.h
2013-01-02 09:12:40 +11:00
rmackay9
50d46898fb
ArduCopter: allow GUIDED mode roll-pitch, yaw and throttle control modes to be overridden
2013-01-02 09:12:17 +11:00
Andrew Tridgell
9e986801c9
Copter: fixed SITL for ArduCopter
2012-12-20 14:52:34 +11:00
Pat Hickey
5e63491994
ArduCopter: fix issues with HAL/HIL mixup and baro/compass instances
2012-12-20 14:52:29 +11:00
Pat Hickey
d93d932831
ArduCopter: defines fixes
...
Conflicts:
libraries/AP_Common/Arduino.mk
2012-12-20 14:52:28 +11:00
Pat Hickey
2aa4657315
ArduCopter: changes to use CONFIG_HIL_BOARD
2012-12-20 14:52:28 +11:00
rmackay9
2f748f8382
ArduCopter: renamed BATT_FAILSAFE to FS_BATT_ENABLE
2012-12-10 23:47:14 +09:00
rmackay9
d31efebd44
ArduCopter: rename throttle failsafe parameters.
...
Switch to LAND flight mode if throttle failsafe triggers and we do not have a GPS.
THR_FAILSAFE renamed to FS_THR_ENABLE.
THR_FS_VALUE renamed to FS_THR_VALUE.
THR_FS_ACTION removed (action is now controlled by setting FS_THR parameter).
2012-12-10 23:38:43 +09:00
rmackay9
2f1b2b70e6
ArduCopter: added ACRO_TRAINER parameter to allow enabling/disabling the acro training function which will bring the roll back to within +- 45 degrees
2012-12-10 22:27:46 +09:00
rmackay9
dadad8677e
ArduCopter: added descriptions for most parameters that did not have them
...
Renamed loiter_radius to circle_radius to better reflect it's purpose.
Removed some unused parameters including WP_MODE, WP_MUST_INDEX, LOG_LASTFILE, AXIS_P
2012-12-10 21:45:57 +09:00
rmackay9
cfe2507c0b
ArduCopter: reduce Rate Roll/Pitch P to 0.150 (was 0.175) and increase I to 0.1 (was 0.01)
2012-12-09 18:08:45 +09:00
Robert Lefebvre
aa4d4f8c24
ACM: Adding Pre-Compiler Define for Stabilize Throttle Mode.
2012-12-08 20:41:05 -05:00
Robert Lefebvre
1b97a92098
ACM: Code Cleanup
2012-12-08 14:49:38 -05:00
rmackay9
f98a807d36
ArduCopter: remove debug related to yaw mode used for alt hold
2012-12-08 14:24:50 +09:00
rmackay9
9dd978576b
ArduCopter: auto yaw changes to allow pilot override of yaw during missions
...
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw). We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
2012-12-08 14:23:32 +09:00
rmackay9
68ca123224
ArduCopter: remove some unused #defines
2012-12-07 15:17:35 +09:00
rmackay9
3a90fc77f9
ArduCopter: add dataflash logging of camera events
2012-12-07 00:57:08 +09:00
rmackay9
a5bb54e36e
ArduCopter: RTL clean-up and slightly improved landing sensor
...
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
rmackay9
072ffec493
ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position
2012-12-06 10:31:41 +09:00
rmackay9
bdb47c449a
ArduCopter: pass linear altitude error to throttle rate controllers.
...
Previously the requested rate used the square root of the altitude error.
Scale pilot's desired vertical rate and acceleration based on ACCELERATION_MAX_Z and VELOCITY_MAX_Z #defines
2012-12-06 10:31:31 +09:00
rmackay9
7b4ed2d227
ArduCopter: restored landing detector to landing throttle mode.
...
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
2012-12-06 10:31:20 +09:00
rmackay9
560bb1d738
ArduCopter: removed unused AUTO_THROTTLE_HOLD #define
2012-12-06 10:31:15 +09:00
rmackay9
3cbef57c64
ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy
...
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
2012-12-06 10:30:49 +09:00
Andrew Tridgell
6fbf5ec8f2
Copter: update ArduCopter for new ins interface
2012-11-30 07:15:18 +11:00
Robert Lefebvre
6b8c39dd10
ACM: Creating Yaw_Look_Ahead yaw mode.
...
This function is not fully tested yet.
2012-11-26 21:37:13 -05:00
Robert Lefebvre
6ffc115236
Changes to get_throttle_rate()
...
Commented out a bit of code that is not used currently
Change the output constrains to #defines so they can be easily changed, particularly for use in TradHeli.
2012-11-21 17:11:38 -05:00
Andrew Tridgell
dafaa2efc8
SITL: disable optical flow on the desktop build
...
it doesn't work yet, as no sensor emulator is available
2012-11-19 09:04:03 +11:00
rmackay9
07a7a1acd8
ArduCopter: replaced digitalRead and digitalWrite with faster calls
...
improved performance logging to dataflash
2012-11-19 01:16:07 +09:00
rmackay9
e92b560df5
ArduCopter: low baterry failsafe
2012-11-15 23:35:41 +09:00