Eugene Shamaev
d086edc762
SITL: add wind type parameters
2018-05-02 07:32:25 -07:00
Peter Barker
767f81265b
Sub: correct compilation under clang++ on MacOSX
2018-04-30 13:04:03 +09:00
Peter Barker
e7b5978d8d
SITL: use a 16-bit mask for GPIO out
2018-04-18 20:31:55 +09:00
Peter Barker
871661c65f
SITL: SIM_Vicon: use existing channel for packing messages
...
Also correct sending of Vicon message; too many bytes were sent
2018-04-02 09:23:27 +09:00
Peter Barker
994e3e7092
SITL: SIM_Vicon: fix compiler warning
2018-03-29 16:45:34 +09:00
Peter Barker
08189e0754
SITL: add parameter for Vicon observation delay
2018-03-27 20:28:53 +09:00
Peter Barker
dfcf4788d3
SITL: add vicon-over-mavlink support
2018-03-27 20:28:52 +09:00
Peter Barker
0d77cfb6c3
SITL: method to return current vehicle location
2018-03-27 20:13:03 +09:00
Eugene Shamaev
6954a0035a
SITL: SITL of several airspeed sensors
2018-03-09 11:27:20 -08:00
Andrew Tridgell
d75e47a4d8
SITL: cope with cygwin64
2018-03-02 17:11:31 +11:00
Peter Barker
1915244960
SITL: correct compiler warning
...
In file included from ../../libraries/SITL/SIM_last_letter.cpp:19:
../../libraries/SITL/SIM_last_letter.h:74:17: warning: private field
'frame_str' is not used [-Wunused-private-field]
const char *frame_str;
SITL: correct compiler warning
In file included from ../../libraries/SITL/SIM_Sprayer.cpp:19:
../../libraries/SITL/SIM_Sprayer.h:55:14: warning: private field
'start_time_us' is not used [-Wunused-private-field]
uint64_t start_time_us;
SITL: correct compiler warnings
In file included from ../../libraries/SITL/SIM_Gripper_Servo.cpp:19:
../../libraries/SITL/SIM_Gripper_Servo.h:56:10: warning: private field
'zero_report_done' is not used [-Wunused-private-field]
bool zero_report_done = false;
SITL: correct compiler warnings
In file included from ../../libraries/SITL/SIM_ADSB.cpp:19:
../../libraries/SITL/SIM_ADSB.h:49:28: warning: private field 'fdm' is
not used [-Wunused-private-field]
const struct sitl_fdm &fdm;
2018-03-02 09:26:37 +09:00
Peter Barker
6a862c6e24
SITL: make home location parsing verbose
...
Given we don't fail to start SITL if the home location fails to parse,
we should at least make the user very aware that their home location
string is bad.
This commit makes failures verbose, and outputs the parsed location
values rather than regurgitating the location string the user supplied;
it was very misleading in that the location could simply fail to parse
and thus be unused.
2018-02-21 23:51:56 +10:00
Andrew Tridgell
6a89fdf268
SITL: use AP_Declination for magnetic tables
2018-02-08 17:36:33 +11:00
Nicholas Engle
1103e92884
SITL: Add SIM_WIND_DIR_Z parameter for SITL
...
This controls the vertical pitch of the 3d wind vector, allowing futher control of the wind
using systems like dronekit. This change directly effects the calcuation of the wind vector
2018-02-05 16:38:53 -08:00
Guglie
4eaa1f17df
SITL: fix pthread_setname_np to build on mac
2017-12-04 21:14:29 +11:00
Andrew Tridgell
917d9842c4
SITL: support AHRS_ORIENTATION in SITL
...
this allows for tailsitters in RealFlight
2017-11-23 14:26:11 +11:00
Patrick José Pereira
28ff272017
SIM_Submarine: Solve problem when frame is above water level
...
Fix bluerobotics/ardusub/issues/128
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
Co-Authored-By: jaxxzer <jwalser90@gmail.com>
2017-11-22 12:38:14 -08:00
Andrew Tridgell
964d64a623
SITL: adjust FlightAxis defaults
...
and map 0,0 to CMAC location, to improve how SITL works in
MissionPlanner
2017-11-19 18:24:08 +11:00
Andrew Tridgell
cdd350f93e
SITL: fixed build under cygwin
2017-11-18 21:23:15 +11:00
Peter Barker
62f7acff52
SITL: reduce max accel of simulated rover
2017-10-26 14:45:19 +11:00
hiro2233
7d304073ed
SITL: fixed include case sensitive
...
On case sensitive cygwin feature enabled, this build ok.
2017-10-25 20:59:55 +11:00
Andrew Tridgell
c5cd1b873c
SITL: use thread for FlightAxis comms
...
this allows us to run SITL at a much higher framerate than RF can
provide, and results in the EKF being much happier
2017-10-21 11:57:59 +11:00
Andrew Tridgell
74265f523a
SITL: support -roll180 option to frames
2017-10-10 10:57:38 +11:00
Mark Whitehorn
dedb40ce0b
SITL: add parameter to simulate reversed pitot tube order
2017-09-22 18:21:09 +10:00
mirkix
93b3970141
SITL: Add tilthvec frame
2017-09-18 21:20:39 +10:00
Andrew Tridgell
7ade37bd4e
SITL: added SIM_GPS_ALT_OFS
...
this is used to give a bad GPS height in SITL, which is very useful for
testing origin vs home issues
2017-09-18 10:24:45 +10:00
Peter Barker
85ebe923b6
SITL: avoid FPE when running fly.ArduPlane
...
Program received signal SIGFPE, Arithmetic exception.
__expf_finite () at ../sysdeps/x86_64/fpu/e_expf.S:132
132 ../sysdeps/x86_64/fpu/e_expf.S: No such file or directory.
(gdb) u
2017-09-06 20:22:52 +10:00
Andrew Tridgell
4aa068d63d
SITL: added simple launch sim for plane
...
allow for bungee, catapult and hand launches
2017-08-29 07:35:04 +10:00
Michael du Breuil
4dbe282121
SITL: Add airspeed failure parameters
2017-08-10 20:15:35 +10:00
Andrew Tridgell
a7967e00e4
SITL: added SIM_GPS_LOCKTIME parameter
2017-07-14 15:02:12 +10:00
Andrew Tridgell
907534d55f
SITL: added dspoiler support
2017-07-03 11:17:42 +10:00
Pierre Kancir
b176ba53d7
SIM_Aircraft: move advance in time from update_position to time_advance
2017-06-07 20:29:02 +10:00
Pierre Kancir
579f655e76
SIM_Aircraft: change define in favor of static constexpr
2017-06-07 20:29:02 +10:00
Pierre Kancir
148e84320b
SITL: Sim_aircraft correct style
2017-06-07 20:28:25 +10:00
Pierre Kancir
599e3d7b83
SITL: make range finder a standalone sitl plugin
2017-06-07 20:28:25 +10:00
murata
c21b586ccc
SITL: add dodeca-hexa support
2017-05-27 14:21:13 +09:00
Andrew Tridgell
47b79eb72d
SITL: expose home location
2017-05-08 13:38:10 +10:00
Andrew Tridgell
d50dcb5ad2
SITL: added SIM_TEMP_BFACTOR
...
for barometer temperature error
2017-05-03 20:12:04 +10:00
Andrew Tridgell
c1b6684b9f
SITL: added temperature control parameters
2017-05-03 20:12:04 +10:00
Andrew Tridgell
67404e9660
SITL: added SIM_ODOM_ENABLE
...
for enabling visual odomotry simulated data
2017-05-01 15:06:46 +10:00
Pierre Kancir
f8d6b5fc9c
AP_HAL_SITL: Allow to use a second type of gps for all type
2017-04-26 18:34:56 +01:00
Andrew Tridgell
1e69508322
SITL: added a vectored tilt tricopter quadplane
2017-04-24 16:54:41 +10:00
Niels Joubert
abd408bf40
SITL: Support both SBPv0 and SBPv2
2017-04-18 18:25:54 +01:00
Andrew Tridgell
92f060bdef
SITL: improved single-motor tailsitter plane
...
give larger control surfaces and take account of thrust airflow over
control surfaces
2017-04-17 14:23:15 +10:00
Andrew Tridgell
4de0daa7a1
SITL: make quaternion state available outside SITL
2017-04-16 14:01:36 +10:00
Andrew Tridgell
68e0b5b7fa
SITL: support XPlane-11
...
the packets are prefixed with DATA* instead of DATA@
This makes it work with both versions
2017-04-09 16:39:26 +10:00
Guilherme Sousa
204fcba8c1
SITL: Added SIM_ENGINE_FAIL to define failed motor
2017-03-29 22:39:51 +11:00
Pierre Kancir
1a374aa9f6
SIM_Gazebo: add a timeout to reset timestamp check
2017-03-18 19:58:11 +11:00
Pierre Kancir
29d35699f2
SITL: Gazebo, throw old paquet based on timestamp as we are using UDP
...
Add some comments
2017-03-18 19:58:11 +11:00
Pierre Kancir
d612209c19
SITL: Gazebo fix implicit cast
2017-03-18 19:58:11 +11:00
Pierre Kancir
ee7355a301
SITL: Reduce some variables scope and include
2017-03-18 19:58:11 +11:00
Pierre Kancir
8054405521
SITL: Change interface port to a generic solution for external simulator
2017-03-18 19:58:11 +11:00
Pierre Kancir
5b8c89225a
SITL: Make socket more verbose
2017-03-18 19:58:11 +11:00
Pierre Kancir
567a8d68e5
SITL: Make socket error more verbose
2017-03-18 19:58:11 +11:00
Pierre Kancir
8f2bdf51ea
SITL: gazebo add socket drain
2017-03-18 19:58:11 +11:00
Pierre Kancir
1bb4e3c9b7
AP_IRLock_SITL: make port variable
2017-03-18 19:58:11 +11:00
Pierre Kancir
63ea8c6f21
SITL: enable multi sitl for gazebo
2017-03-18 19:58:11 +11:00
CSe
491b545fab
SITL: fix gimbal connection on Windows
2017-03-17 00:43:21 +00:00
Randy Mackay
07ce7b8bd6
SITL: add GPS2_GLITCH parameter
2017-03-13 11:31:51 +11:00
jaxxzer
b98573d55f
SITL: Improved Sub simulation
...
-Constrain z axis movement between -100m (seafloor) and 0m (water
surface)
-More accurate thruster modelling
2017-03-07 09:35:41 +11:00
Rustom Jehangir
36f3cae535
SITL: Add support for Sub
2017-02-21 11:26:14 +11:00
Andrew Tridgell
d338d9c0aa
SITL: fixed whitespace on flightaxis code
2017-02-18 17:26:43 +11:00
Andrew Tridgell
3c8020862c
SITL: support a builtin tailsitter vehicle type
2017-02-18 17:26:43 +11:00
Andrew Tridgell
8bd1fc63d5
SITL: support pitch90 and pitch270 in FlightAxis
...
used for flying tailsitters
2017-02-18 17:26:43 +11:00
Michael du Breuil
ef0c51da42
SITL: Add GPS noise parameter
2017-02-13 09:23:14 +11:00
Andrew Tridgell
0171b64feb
SITL: setup simulator to match firefly6 AvA servo outputs
2017-02-06 16:18:58 +11:00
Andrew Tridgell
642e5aa5b7
SITL: match simulated tilt rate for CL84 to real vehicle
2017-01-25 19:01:15 +11:00
Peter Barker
8b38ce666d
SITL: SIM_XPlane: fix fabsf/abs warning; location alts are in integer cm
2017-01-17 09:41:37 -08:00
Andrew Tridgell
39ab1a0abc
SITL: adapt to new RC_Channel API
2017-01-12 17:39:37 +11:00
Pierre Kancir
c0be20ece2
SITL: XPLANE fix member shadowing
2017-01-09 06:51:48 -08:00
Andrew Tridgell
eaf5676636
SITL: fixed unselection bitmask bug in XPlane
2017-01-09 09:55:14 +11:00
Andrew Tridgell
35d6dc141a
SITL: only de-select data types in xplane once
...
don't fight the user
2017-01-07 14:41:23 +11:00
Pierre Kancir
bf135aeff7
SITL: Aircraft correct some syntax, implicit cast, make some local variable const, remove tabs and whitespace
2016-12-19 14:53:17 +00:00
Randy Mackay
3ed9eb98f3
SITL: minor comment fix for SIM_Multicopter
2016-12-19 17:01:04 +09:00
Andrew Tridgell
65c3d0e060
SITL: added ACC2_BIAS
2016-12-19 08:07:14 +11:00
Pierre Kancir
a5161edc97
SITL: remove duplicate
2016-12-05 10:59:45 -08:00
Peter Barker
20b86605fa
SITL: gripper closes faster, vary load carried by gripper
...
If gripper is closed on ground it is considered to be carrying
something
2016-12-02 12:04:05 +11:00
Peter Barker
b751f836bb
SITL: attach a string with a mass on the end to servo gripper
2016-12-02 12:04:05 +11:00
Peter Barker
f8918d15b1
SITL: add a hagl method to aircraft
2016-12-02 12:04:05 +11:00
Peter Barker
f1c23dc9be
SITL: remove argument to on_ground
...
This was always the current position
2016-12-02 12:04:05 +11:00
Peter Barker
e24f3f9419
SITL: correct on-ground correction
...
Using the cached ground_height_difference may mean
you end up at the wrong height if you were near
the edge of an SRTM square and had high horizontal
velocity
2016-12-02 12:04:05 +11:00
Andrew Tridgell
42435e700b
SITL: expose height above ground to all models
2016-11-28 08:26:56 +11:00
Tom Pittenger
11229d2588
SITL: fix whitespace
2016-11-18 10:42:10 -08:00
ori ganoni
631b5c3ebc
adding turbulance to SITL
2016-11-17 20:06:35 -08:00
Lucas De Marchi
f6d475c1e6
AP_HAL_SITL: add O_CLOEXEC in places missing it
...
By opening with O_CLOEXEC we make sure we don't leak the file descriptor
when we are exec'ing or calling out subprograms. Right now we currently
don't do it so there's no harm, but it's good practice in Linux to have
it.
2016-11-07 12:37:30 -03:00
Peter Barker
d9cbcd9487
SITL: a simulator for the EPM grabber
2016-11-05 10:20:43 +09:00
Peter Barker
d439bbe5bf
SITL: SIM_Gripper_Servo, a simulated servo gripper
2016-11-05 10:20:29 +09:00
murata
c808ee2f49
Global: To nullptr from NULL.
...
RC_Channel: To nullptr from NULL.
AC_Fence: To nullptr from NULL.
AC_Avoidance: To nullptr from NULL.
AC_PrecLand: To nullptr from NULL.
DataFlash: To nullptr from NULL.
SITL: To nullptr from NULL.
GCS_MAVLink: To nullptr from NULL.
DataFlash: To nullptr from NULL.
AP_Compass: To nullptr from NULL.
Global: To nullptr from NULL.
Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Peter Barker
1997a4e044
SITL: include mass of sprayer payload in vehicle mass
2016-10-29 15:02:56 +09:00
Peter Barker
a7867603a0
SITL: SIM_Sprayer: a simulated sprayer
2016-10-29 15:02:48 +09:00
priseborough
d830f68901
SITL: Add angular acceleration to simulator states
...
The calculation used is an approximation to work around the lack of angular acceleration in the interface with the flight dynamics model.
2016-10-27 14:54:44 +11:00
priseborough
27dab27565
SITL: Add parameters for sensor position offsets in body frame
2016-10-27 14:54:44 +11:00
Andrew Tridgell
5e03358b0b
SITL: added servo filtering
...
SIM_SERVO_SPEED is servo time constant in seconds
2016-10-25 20:39:38 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Peter Barker
6f200cdc3d
SITL: SIM_Rover: remove unused variables
2016-10-24 08:57:55 -02:00
Peter Barker
d3422d1653
SITL: SIM_Tracker: remove unused variable
2016-10-24 08:57:55 -02:00
Georacer
54c1efe5e1
Connection to last_letter once again successful
2016-10-17 09:37:23 +11:00
John Hsu
fc13efa673
SITL: update SIM_Gazebo SITL interface servo packet to have 16 floats, matching sitl_input struct.
2016-10-13 12:03:20 +11:00
Gustavo Jose de Sousa
06c3102701
SITL: SIM_Calibration: bring angular velocity controller back
...
And fix header documentation.
2016-10-11 12:58:37 +11:00
Murilo Belluzzo
0b86532b5c
Global: Remove '\r' character from all source code files
2016-10-03 22:13:27 -03:00
Michael Oborne
11c376588d
AP_GPS_NOVA: support tersus/novatel/comnav gps
2016-09-20 10:53:49 +10:00
Andrew Tridgell
c275e7c61d
SITL: added SIM_SPEEDUP parameter
...
allows changing speed of simulation while running
2016-09-19 07:45:24 +10:00
Andrew Tridgell
52caf8419e
SITL: fixed sense of wind direction
...
wind direction is where wind is coming from, not going to
2016-09-16 10:59:27 +10:00
Andrew Tridgell
8f35305496
SITL: added a simpler compass cal simulation
...
just output 1250 to servo5 and it will go through lots of rotations
2016-09-16 08:59:43 +10:00
Andrew Tridgell
3aba0d8359
SITL: fixed rover altitude
...
thanks to Grant for noticing this
2016-08-24 13:29:45 +10:00
Andrew Tridgell
49b82b767f
SITL: added RPM for heli sim
2016-08-23 09:30:14 +10:00
Andrew Tridgell
3ecf2850a8
SITL: fixed send of MAVLink2 pkt
2016-08-16 16:33:36 -07:00
Tom Pittenger
19ac9bce48
SITL: add Ping2020 simulated device
2016-08-16 16:33:36 -07:00
Andrew Tridgell
622d26b122
SITL: expand to 16 output channels
...
needed for IC engine testing with octaquadplane
2016-07-25 15:45:39 +10:00
Andrew Tridgell
e73d43d4f9
SITL: improve ICEngine simulation
2016-07-25 10:06:02 +10:00
Andrew Tridgell
995fb7cd86
SITL: added IC engine simulation
2016-07-25 10:06:02 +10:00
Andrew Tridgell
4301faeac9
SITL: map X-Plane Mixture inputs to channels 6 and 7
...
this gives two user controllable channels for experimental aircraft
2016-07-22 19:14:46 +10:00
Andrew Tridgell
69da7e9f86
SITL: added elevrev option for plane sim
...
used by autotest
2016-07-22 16:42:23 +10:00
Andrew Tridgell
f075fcd79f
SITL: added SIM_PIN_MASK
...
for simulation of GPIO pins
2016-07-22 15:01:20 +10:00
Tom Pittenger
44a60f278a
SITL: change default of SIM_ADSB_RADIUS from 1E3 to 10E3
2016-07-21 00:04:20 -07:00
Andrew Tridgell
a1c759e491
SITL: added sensor smoothing
...
this adds smoothing of sensors for kinematic consistency when
interacting with the ground. It means when we land the EKF doesn't go
crazy
2016-07-19 21:38:16 +10:00
Andrew Tridgell
4faa57074a
SITL: removed vehicle specific ground handling
2016-07-19 14:47:47 +10:00
Andrew Tridgell
e7a54c83d1
SITL: allow SITL to use terrain data for ground height
2016-07-19 14:42:31 +10:00
Tom Pittenger
acaf0c6a5d
SITL: LPF the SIM_WIND_DIR and SIM_WIND_SPD values to eliminate step inputs
2016-07-15 18:37:40 -07:00
Andrew Tridgell
4e8b4f29d9
SITL: added -heavy option to fixed wing model
2016-07-16 08:14:29 +10:00
Andrew Tridgell
f3f34be9c4
SITL: added comment on heli interlock
2016-07-12 20:50:22 +10:00
Andrew Tridgell
4f17093add
SITL: give a bit more pitch on tail in XPlane heli
2016-07-12 19:08:50 +10:00
Andrew Tridgell
fdd20830d6
SITL: use flaps for collective on helis in X-Plane 10
...
works for more helis
2016-07-12 19:08:50 +10:00
Andrew Tridgell
871219d199
SITL: support helicopters with X-Plane 10
...
we get collective from "throttle2" and get interlock from generator1 on/off
2016-07-12 14:40:08 +10:00
Andrew Tridgell
0be442d34b
SITL: improved throttle input in XPlane
...
reduce chance that throttle output will be interpreted as input
2016-07-05 09:48:40 +10:00
Andrew Tridgell
f387f248d3
SITL: added support for servo slew rates and retract servos
...
this is for tiltrotors with retract servos
2016-07-05 09:40:37 +10:00
Andrew Tridgell
82f131667d
SITL: added flaps control in XPlane
2016-06-30 20:26:00 +10:00
Andrew Tridgell
a6e927d434
SITL: default gyro cal off in XPlane and FlightAxis
...
pointless doing cal on these backends
2016-06-24 10:32:52 +10:00
Andrew Tridgell
569443231a
SITL: improved altitude data in XPlane
2016-06-20 12:52:13 +10:00
Andrew Tridgell
51fff00871
SITL: report data and frame rates in XPlane
...
and avoid time going backwards if possible
2016-06-20 12:52:13 +10:00
Andrew Tridgell
b7395ee74b
SITL: fixed sign of magnetic inclination
2016-06-20 11:17:36 +10:00
Andrew Tridgell
5b7b799046
SITL: fixed mag field in JSBSim and last_letter
2016-06-20 11:07:51 +10:00
Andrew Tridgell
16595d2f3b
SITL: auto-set AHRS_EKF_TYPE to 10 for XPlane and FlightAxis
2016-06-20 08:38:53 +10:00
Andrew Tridgell
2f88c24f49
SITL: added debug showing UDP ports for XPlane
2016-06-19 21:18:19 +10:00
Andrew Tridgell
ec5534bd6a
SITL: explain the throttle_magic code for XPlane
2016-06-19 21:10:49 +10:00
Andrew Tridgell
f76a7e64ca
SITL: auto-select correct data fields from X-Plane10
2016-06-19 20:57:34 +10:00
Andrew Tridgell
4f99c17aae
SITL: added X-Plane 10 SITL backend
2016-06-19 13:59:15 +10:00
Paul Riseborough
55b0bbd3f1
SITL: Add simulation of 3D earth magnetic field
...
Use an independant method to the flight code using tables that that can updated.
Data taken from NOAA online calculator using WMM data at 2016-6-16 date
2016-06-19 12:51:34 +10:00
Paul Riseborough
078284e2e2
SITL: Add magnetic field environment to simulation
...
Includes parameters enabling a ground level magnetic anomaly to be modelled.
TODO - add automatic setting of declination, inclination and field strength using WGS-84 position.
2016-06-19 12:51:34 +10:00
Andrew Tridgell
e360c6117e
SITL: make SIM_* variables available to simulator backends directly
2016-06-17 08:36:13 +10:00
Tom Pittenger
1770f314ac
SITL: change SIM_ADSB default to -1 to default disabled to leave telem port available
2016-06-15 17:22:54 -07:00
Andrew Tridgell
027788f72b
SITL: fixed gimbal simulator for recent MAVLink2 changes
2016-06-16 10:17:28 +10:00
Andrew Tridgell
145ab1d626
SITL: fixed send of ADSB_Vehicle packets with recent MAVLink2 changes
2016-06-16 10:15:07 +10:00
Tom Pittenger
0ed868d97b
SITL: compiler warning, comparing float to 0
2016-06-14 21:05:38 -07:00
Tom Pittenger
c3b241ca88
SITL: change ADSB_VEHICLE update rate to 1Hz instead of 2Hz to match PING behavior
2016-06-14 21:05:32 -07:00
Tom Pittenger
95da4accfb
SITL: add SIM_ADSB_COUNT, RADIUS, ALT params
2016-06-14 21:00:39 -07:00
Andrew Tridgell
9e9a048016
SITL: make heli RPM rpm1 in FlightAxis
2016-06-04 18:33:36 +10:00
Andrew Tridgell
79ffc28f68
SITL: fixed ground accel for helis in FlightAxis
...
fixes landing detection
2016-06-04 15:52:00 +10:00
Andrew Tridgell
7c227ac96c
SITL: debug code for logging raw SITL data
2016-06-04 14:21:21 +10:00
Andrew Tridgell
f6a7c1839a
SITL: use FlightAxis body accel
...
less noisy than rotating early accel
2016-06-04 14:20:55 +10:00
Andrew Tridgell
f6e42cb3e2
SITL: cope with restarting RealFlight while connected
2016-06-04 12:07:03 +10:00
Andrew Tridgell
9c13ac997e
SITL: use FlightAxis accel when not touching the ground
2016-06-04 11:34:57 +10:00
Andrew Tridgell
0b9fca6ef9
SITL: use quaternion attitude from FlightAxis
2016-06-04 11:04:15 +10:00
Andrew Tridgell
f4f0ae8c8b
SITL: auto-reconnect FlightAxis on reset button
2016-05-29 19:17:29 +10:00
Leonard Hall
e5bdf0a0a2
SITL: Single and Coax fixes
2016-05-29 16:12:13 +10:00
Andrew Tridgell
4c66e14563
SITL: fixed air resistance bug for heli, balloon and singlecopter
2016-05-26 20:38:20 +10:00
Randy Mackay
d26a9d4a22
SITL: fix compiler warning by defaulting frame_type
2016-05-26 17:03:28 +09:00
Andrew Tridgell
9f33ece3ef
SITL: support coax copter
2016-05-26 17:08:27 +10:00
Andrew Tridgell
8944d298ed
SITL: added SingleCopter simulator
2016-05-26 16:30:39 +10:00
Grant Morphett
52755c893d
Rover: Print message when running skid steering SITL
2016-05-24 12:24:53 +10:00
Tom Pittenger
c77a5e6764
SITL: rename aspd variables and params to arspd
2016-05-17 16:36:07 -07:00
Peter Barker
7510e4d0a7
SITL: setsid() when starting JSBSim so Ctrl-C doesn't kill it in GDB
2016-05-11 14:10:48 +10:00
Andrew Tridgell
88b910c13d
SITL: changed firefly motors to be suitable for a pixhawk
...
get channel groupings right
2016-05-11 05:55:25 +10:00
Andrew Tridgell
3e1cad5df2
SITL: adjust tricopter so default yaw servo values will work
2016-05-11 05:55:24 +10:00
Andrew Tridgell
48ca1a8d92
SITL: increase the mass of the plane to 2kg
...
less wafty in the air
2016-05-11 05:55:24 +10:00
Andrew Tridgell
9c90709872
SITL: fixed namespace of SITL classes
2016-05-11 05:55:23 +10:00
Andrew Tridgell
91abc636f4
SITL: fixed quadplanes with elevons
2016-05-11 05:55:23 +10:00
Andrew Tridgell
2d47ca8095
SITL: fixed moment of rotated motors
2016-05-11 05:55:23 +10:00
Andrew Tridgell
bd8cd71745
SITL: fixed fwd motor angles for tri and y6 frames
...
should be 60 degrees to have motors evenly spaced around frame for
equal lift per motor when level
2016-05-11 05:55:23 +10:00
Andrew Tridgell
125a9feb3d
SITL: added tilttri frame type
...
tiltrotor tricopter
2016-05-11 05:55:22 +10:00
dgrat
41661f815f
AP_Math: Replace the pythagorous* functions with a variadic template
...
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
Gustavo Jose de Sousa
9fa85d9bcf
SITL: add SIM_Calibration
...
That model can be used to run compass and accelerometer calibration by rotating
the vehicle through the servos channels.
2016-05-10 16:16:37 +10:00
Gustavo Jose de Sousa
45754ef37c
SITL: Multicopter: remove leftover comment
...
That went unnoticed by 8a98ce4
("SITL: moved to common code for attitude/pos
update")
2016-05-10 16:16:37 +10:00
Gustavo Jose de Sousa
ce8766e1cd
SITL: remove set_yaw_degrees()
...
That function isn't being used anywhere.
2016-05-10 16:16:37 +10:00
Andrew Tridgell
7cdab2a6c9
SITL: FlightAxis can support 8 channels
2016-05-04 13:05:43 +10:00
Andrew Tridgell
3b0cd9f101
SITL: added RC input from FlightAxis
...
use the interlink controller for input for 6 channels
2016-05-04 12:51:27 +10:00
Andrew Tridgell
68e17af070
SITL: allow for changing FlightAxis controller IP
2016-04-29 09:03:48 +10:00
Andrew Tridgell
e428d1e72d
SITL: support tricopter quadplanes
2016-04-28 22:36:53 +10:00
Andrew Tridgell
9e01d7de6c
SITL: added support for "quad-fast" frame
...
much more powerful copter for testing nav at high speed
2016-04-28 10:05:04 +10:00
Andrew Tridgell
785ad0614a
SITL: fixed coverity 125055
2016-04-26 16:46:06 +10:00
Andrew Tridgell
ed4e8b635a
SITL: fixed fd leak
...
coverity #125056
2016-04-26 16:43:54 +10:00
Andrew Tridgell
847483d744
SITL: fixed coverity warning
2016-04-26 16:37:17 +10:00
Andrew Tridgell
180a7905e5
SITL: make Z down in motors
2016-04-22 10:45:55 +10:00
Andrew Tridgell
aa80851138
SITL: support fireflyY6 quadplane model
2016-04-22 10:28:15 +10:00
Andrew Tridgell
8880635fe1
SITL: support vtail and elevon planes in builtin plane sim
...
remove old tiltrotor in favor of new tiltrotor code
2016-04-22 10:28:15 +10:00
Andrew Tridgell
b4d24d8e03
SITL: fixed rotations of motors by large angles
2016-04-22 10:28:15 +10:00
Andrew Tridgell
71ca534ec6
SITL: added Y6 frame
2016-04-21 21:11:38 +10:00
Andrew Tridgell
49822effca
SITL: added tricopter simulator
2016-04-21 20:29:49 +10:00
Andrew Tridgell
c262d6a1b4
SITL: break up multicopter into Motor/Frame/Multicopter classes
...
ready for more tiltrotors
2016-04-21 19:56:44 +10:00
Andrew Tridgell
57aef8e1e9
SITL: added basic wind support in multicopter, plane and quadplane
...
this adds non-turbulent wind support for the built-in simulators. I
added it primarily for quadplane testing, but it should also be useful
for multicopter navigation testing.
2016-04-20 11:48:37 +10:00
Grant Morphett
5861b754cc
Rover: fixing a bug the Rover simulation
...
Just a small change to ensure the max_wheel_turn parameter is used
instead of a hard coded value.
2016-04-14 08:55:04 +09:00
Andrew Tridgell
7dcd17a2fa
SITL: make multicopter motors only effective above 10%
2016-04-02 22:45:05 +11:00
Andrew Tridgell
73a2c99d56
SITL: limit rotational rate to 2000dps
2016-03-26 14:23:05 +11:00
Andrew Tridgell
1d42b0281a
SITL: ADSB: fixed heading and fixed windows startup
2016-03-18 11:18:19 +11:00
Andrew Tridgell
b0ac6c26e0
SITL: support octaquad in quadplane sim
2016-03-13 10:12:14 +11:00
Will Sackfield
8b5fa9d23d
SITL: Initialise yaw_rate and pitch_rate
...
* Clang requires these variables to be initialized
2016-02-29 14:14:37 +11:00
dgrat
5148e41c1a
AP_Math: Cleaned macro definitions
...
Moved Definitions into a separate header. Replaced PI with M_PI and
removed the M_PI_*_F macros.
2016-02-27 02:51:33 -03:00
Tom Pittenger
faa4238370
SITL: fixed warning comparing signed vs unsigned
2016-02-23 10:32:48 -08:00
Tom Pittenger
f20841f491
SITL: add reverse thrust to Plane Sim
2016-02-09 14:18:01 +11:00
Tom Pittenger
1f714ed75d
SITL: handle negative throttle
...
- negative throttle was causing negative offsets
2016-02-09 14:18:01 +11:00