Commit Graph

329 Commits

Author SHA1 Message Date
Andrew Tridgell 5133799e23 PX4: start two barometers if possible 2015-01-09 11:50:57 +11:00
Andrew Tridgell 15c5e153c8 PX4: re-enable some warnings as errors 2015-01-09 11:38:28 +11:00
Andrew Tridgell 5b46dec9a0 PX4: avoid build errors from new upstream -Werror directives 2015-01-09 11:37:57 +11:00
Randy Mackay b4b062e9ef PX4: start batt_smbus 2014-12-31 15:22:52 +09:00
Randy Mackay 70dcc724ac PX4: add batt_smbus module to build 2014-12-31 15:22:52 +09:00
Randy Mackay 9d5c27ca83 PX4: start px4flow driver 2014-12-06 18:16:43 +11:00
Andrew Tridgell 722ce0628a PX4: enable ccache on windows build 2014-12-04 08:12:47 +11:00
Andrew Tridgell 9b75237a38 PX4: don't build lsm303d and l3gd20 on PX4v1 2014-11-28 09:16:56 +11:00
Andrew Tridgell bbb47ece9c PX4: use a common makefile for most of v1 and v2 2014-11-28 08:06:32 +11:00
Andrew Tridgell 4edd943166 PX4: disable auth on px4v1 too 2014-11-26 19:19:05 +11:00
Andrew Tridgell 5a78c584d2 PX4: disable auth command to keep us below 1MByte 2014-11-26 10:38:31 +11:00
Andrew Tridgell 420889d061 build: added motor_test, and fixed build checks for PX4 2014-11-26 10:24:14 +11:00
Andrew Tridgell 4f44a63bef build: fixed build with PX4/Firmware master
the reflect command has not been merged upstream yet
2014-11-20 08:59:04 +11:00
Andrew Tridgell 6d10797c59 build: enable uavcan if ../uavcan directory is present 2014-11-18 21:42:36 +11:00
Andrew Tridgell a9ee2ae253 PX4: change IMU order so vib isolated IMUs are 1 and 2
also try to start external ms5611
2014-11-18 15:39:37 +11:00
Andrew Tridgell 26d3ad18b8 Revert "PX4: enabled support for UAVCAN"
This reverts commit 71b2306aa9.

This broke the build due to git submodules. We need to work out how
ArduPilot is going to handle the external uavcan module dependency
before we enable this again
2014-11-14 16:08:52 +11:00
Holger Steinhaus 71b2306aa9 PX4: enabled support for UAVCAN 2014-11-14 14:32:42 +11:00
John Williams b1c6931ade Build: added zynq make target 2014-11-14 10:21:05 +11:00
Andrew Tridgell 75a517824b build: put elf file in current directory
makes it more obvious where the build ends up
2014-11-13 17:27:53 +11:00
Andrew Tridgell b5f1ab496b build: be less strict on compiler version for PXF 2014-11-07 22:15:28 +11:00
Andrew Tridgell 3f60cddb87 PX4: build reflect command for USB stress testing 2014-11-07 22:15:28 +11:00
Andrew Tridgell 1adacf42b9 PX4: fixed startup log msg location 2014-10-30 08:30:38 +11:00
Andrew Tridgell 6bf76acf96 PX4: add TESTS_MATHLIB_DISABLE define
this helps building with upstream master
2014-10-30 08:09:39 +11:00
Andrew Tridgell 500ecebf57 PX4: conditionally build auth command and libraries
this makes it possible to build with upstream master
2014-10-30 08:09:38 +11:00
Andrew Tridgell 834c91b192 PX4: try starting the ll40ls on either I2C bus 2014-10-20 07:07:14 +11:00
Randy Mackay 4bdd814dcc Build: enable px4flow driver on Pixhawk 2014-10-15 16:35:26 +09:00
Emile Castelnuovo 958e5e31fc Build: VRBRAIN corrected order of MAG startup for 4.5 board 2014-08-31 10:57:05 +09:00
Emile Castelnuovo 0e118eb3d0 Build: VRBRAIN corrected order of MAG startup 2014-08-31 10:57:01 +09:00
LukeMike 44f1ef207d VRBRAIN: added startup of internal mag's driver for VR Brain Standard 5 2014-08-31 10:56:54 +09:00
LukeMike bebfbd3fbb VRBRAIN: modified target clean 2014-08-16 20:28:42 +10:00
Andrew Tridgell 148dfbd180 build: fixed flymaple build 2014-08-13 18:46:44 +10:00
Andrew Tridgell 1a007dfcc0 build: added subtypes for all boards 2014-08-13 18:46:43 +10:00
Mikhail Avkhimenia 2899e44c0c build: add navio build target 2014-08-12 22:08:13 +10:00
Mikhail Avkhimenia e5c8a0af77 build: add Raspberry Pi toolchain 2014-08-12 22:07:22 +10:00
Andrew Tridgell 4dfafcf7ba build: removed hil from frames list
it breaks "apm1-hil" target for copter
2014-08-07 12:34:30 +10:00
Andrew Tridgell 8ac9c11055 build: allow "make px4-v2-hil-upload" 2014-08-07 09:51:32 +10:00
Andrew Tridgell 24b481ac0d build: fixed dependency on frame type in make target 2014-08-01 06:54:03 +10:00
LukeMike b6d361a3f7 build: VRBRAIN changed start of new drivers of sensors 2014-07-15 20:42:50 +10:00
LukeMike f1b99036e2 build: VRBRAIN added new module for rotation of sensors 2014-07-15 20:42:33 +10:00
Andrew Tridgell fdeac40135 build: added board subtypes to build 2014-07-14 09:44:35 +10:00
Andrew Tridgell e2a3a4e45c build: allow native build to use distcc 2014-07-14 09:44:34 +10:00
Andrew Tridgell 3475f39daf build: enable ccache if installed for all builds 2014-07-14 09:44:34 +10:00
Andrew Tridgell 09e9074cb2 build: added bbone as build target 2014-07-14 09:44:34 +10:00
Andrew Tridgell a224d8c3f9 build: rename board_avr_sitl.mk to board_native.mk 2014-07-14 09:44:34 +10:00
Andrew Tridgell 0b6c810a6e build: added ERLE build type 2014-07-14 08:52:43 +10:00
Andrew Tridgell fc368202ad build: fixed build with latest upstream PX4 Firmware tree 2014-07-09 08:12:10 +10:00
Andrew Tridgell 5230684bad build: disable some compiler errors for now
this needs more work, but allows us to build with upstream PX4
Firmware now
2014-07-08 20:28:45 +10:00
akdslr 26a36eeca1 PX4 ROMFS INIT: Added starting the optional mb12xx sensor 2014-07-08 15:07:49 +10:00
akdslr 17eacf5bff mk PX4: Added the new ll40ls device to modules list and start commands 2014-07-08 15:07:49 +10:00
Andrew Tridgell 8710922a02 PX4: fixed orientation of internal hmc5883 on FMUv3 2014-07-04 13:58:38 +10:00
Andrew Tridgell a25eab4ada PX4: try to start both hmc5883 sensors
internal + external
2014-07-04 12:08:17 +10:00
Andrew Tridgell d462d91533 PX4: added comments on FMU3 rotations 2014-07-04 10:47:58 +10:00
Andrew Tridgell 41486ac59c PX4: fixed l3gd20 rotation
based on first flight log
2014-07-04 10:18:04 +10:00
Kevin Hester a8fd4472be ph2 support: Fix typo in startup rc 2014-07-04 10:17:28 +10:00
Andrew Tridgell 292d1d8179 PX4: try to startup FMUv3 with right rotations 2014-07-03 14:21:45 +10:00
Andrew Tridgell 226eece7e2 PX4: added conversion lib for rotation 2014-07-03 14:21:25 +10:00
holger 65e7c74067 PX4: disable PX4IO RC handling in a clean way
Upstream PX4 Firmware provides a clean way to disable PX4IO handling by supplying the argument "norc" to "px4io start". After applying this fix to the rc.APM startup script, the quick hack contained in commit 180cceee of diydrones/PX4Firmware can be safely reverted.
2014-07-03 11:20:14 +10:00
LukeMike 0dc0d2f6c0 VRBRAIN: included module esc_calib for ESC's calibration from shell 2014-07-01 12:21:35 +02:00
LukeMike de1d0c6989 VRBRAIN: deactivated error on HMC5883 start 2014-07-01 12:21:34 +02:00
LukeMike 0dc274221b VRBRAIN: renamed external and on board drivers for MPU6000 and HMC5883 sensors 2014-07-01 12:21:33 +02:00
LukeMike 69f75886e1 VRBRAIN: some not important adjustments 2014-07-01 12:21:32 +02:00
LukeMike 3adb04dd71 VRBRAIN: added automatic update of bootloader from SD at startup 2014-07-01 12:21:32 +02:00
LukeMike efd407b56e VRBRAIN: enabled the compilation of module bl_update for bootloader update from nuttx 2014-07-01 12:21:31 +02:00
Andrew Tridgell 166c1fd530 PX4: startup FMUv3 sensors if available 2014-06-30 07:58:35 +10:00
LukeMike 78f29f11e7 VRBRAIN: Modified makefile for VirtualRobotix's boards 2014-06-19 11:28:45 +02:00
LukeMike 33537b26ce VRBRAIN: Removed the stop in case of error on startup of magnetometer.
Thus should enable to fly without a magnetometer.
2014-06-19 11:28:33 +02:00
Emile Castelnuovo 8a747ef977 VRBRAIN: added missing boards definition 2014-06-19 11:27:43 +02:00
LukeMike b7907e6a5a VRBRAIN: Added makefile and startup scripts for VR Brain 5 board. 2014-06-19 11:27:41 +02:00
LukeMike 068dce6820 VRBRAIN: Scripts for VRBRAIB custom start 2014-06-19 11:27:40 +02:00
LukeMike 994f6160af VRBRAIN: Changed the management of VirtualRobotix's boards.
Added missing files
2014-06-19 11:27:39 +02:00
LukeMike 8f552d5758 VRBRAIN: Changed the management of VirtualRobotix's boards. 2014-06-19 11:27:38 +02:00
Andrew Tridgell cf3b487e63 build: fixed TOOLPATH on MacOS
thanks to oriondream for this fix

fixes issue #1151
2014-06-17 20:46:12 +10:00
Andrew Tridgell 3909a9574b AVR: fixed some build warnings with gcc 4.8.2 2014-05-08 15:15:55 +10:00
Andrew Tridgell 603e84a688 SITL: disable missing initializer warnings
not specifying all initializers is normal
2014-05-08 11:11:35 +10:00
Andrew Tridgell 3dc0404e2b SITL: prevent unused parameter warnings 2014-05-08 11:01:32 +10:00
Emile Castelnuovo 1d28acd182 VRBRAIN: Added missing files. Added *.vbrain files to git ignore. 2014-04-08 16:19:20 +10:00
Emile Castelnuovo 7fe4847b6c VRBRAIN: Added NuttX driver vroutput for PWM out
Modified script rc.APM to launch modules vrinput and vroutput
Modified startup scripts to run APM without SD
2014-04-08 16:19:20 +10:00
Emile Castelnuovo 01b7bcd05d mk: new VRBRAIN board definition 2014-04-08 16:19:20 +10:00
Emile Castelnuovo bbe0362600 mk: new make files for VRBRAIN 2014-04-08 16:19:19 +10:00
Andrew Tridgell fb70ecb9d4 build: added -obc supplementary target 2014-04-07 07:28:50 +10:00
NosDE 613fda4889 PX4: enabling mkblctrl for fmuv1/fmuv2
See the comments in mk/PX4/ROMFS/init.d/rc.APM for details
2014-03-29 06:45:30 +11:00
Andrew Tridgell f31183f22d build: added APM_BUILD_DIRECTORY define to build
this makes it possible to have different default parameter values for
different vehicle types in libraries, as long as you use the makefile
based build
2014-03-26 12:15:31 +11:00
Andrew Tridgell 11956ece7c PX4: make compass calibrate fail non-fatal
until we sort out what is going on with compass calibration failures
this is the best option
2014-03-11 13:32:47 +11:00
Mike McCauley 55cf4b2111 mk: added HIL_MODE defitinition for Flymaple 2014-02-17 05:56:37 +11:00
Andrew Tridgell 082a3561c4 build: make hil equal hilsensors 2014-02-15 05:29:46 +11:00
Andrew Tridgell d3088b230a PX4: use RGBLED state to show startup state
solid white while booting, solid red on error
2014-02-04 21:43:47 +11:00
Andrew Tridgell e037b37880 PX4: added "make px4-cleandep" for faster rebuilding between branches 2014-01-22 17:15:34 +11:00
Andrew Tridgell 02c98f901d PX4: run hmc5883 compass calibration on every boot
this gives us more consistent compass readings between boots
2014-01-22 17:15:34 +11:00
Andrew Tridgell 792667e311 PX4: test MTD device on boot
full rwtest on FMUv2, read test on FMUv1
2014-01-16 13:11:14 +11:00
Andrew Tridgell 950bb09735 PX4: enable MTD on FMUv1 as well 2014-01-15 19:33:14 +11:00
Andrew Tridgell 7a02c2720b PX4: added defines for PX4 and NuttX version in logs 2014-01-14 15:35:41 +11:00
Andrew Tridgell 9d09a96377 PX4: don't write to BOOT.LOG unless we have errors
this gets us to zero writes to microSD when no errors and not armed
2014-01-14 13:57:59 +11:00
Andrew Tridgell db19c8b410 PX4: start mtd driver on FMUv2 2014-01-14 12:46:27 +11:00
Andrew Tridgell db8b262939 PX4: enable mtd driver in build 2014-01-14 12:46:26 +11:00
Andrew Tridgell 8698ee43bb PX4: use BOOT.LOG instead of boot.log 2014-01-14 12:46:26 +11:00
Andrew Tridgell f7029e6587 px4: enable dual telemetry by default on FMUv1
this makes us compatible with wiring diagrams from PX4 site
2013-12-31 11:54:42 +11:00
Andrew Tridgell f3c36ccef1 px4: fixed IO build 2013-12-30 14:51:40 +11:00
Andrew Tridgell b59f2d4326 build: put px4io elf files in build directory 2013-12-28 10:17:47 +11:00
Andrew Tridgell 2e9e464c4b PX4: update FMUv1 bootloader to use USBID 0x10 2013-12-21 06:25:43 +11:00
Macrauder 62fcfd8d9b build: Use generic app descriptior for mac spotlight search
kMDItemKinde is a localized string, only in EN OSX versions the value
is Application, changed to generic ContentType metafild
2013-12-17 14:55:31 +11:00
Andrew Tridgell 5ca73785c8 PX4: added automatic IO firmware update
this avoids the px4io.loaded file on the SD card that confused many
users
2013-12-13 12:44:47 +11:00
Andrew Tridgell 829767bed2 PX4: change FMUv2 bootloader USB ID to 0x0011 2013-12-13 11:02:19 +11:00
Andrew Tridgell ceef872a51 build: fixed a build cmp warning 2013-12-11 17:29:27 +11:00
Andrew Tridgell 3c5dcc7862 PX4: added -Wno-packed
we know that packed data structures are not as efficient
2013-12-11 11:10:26 +11:00
Andrew Tridgell 56752f4027 build: reduced PX4 warnings and avoid rebuilding when possible 2013-12-11 09:59:41 +11:00
Andrew Tridgell 3ead86ee2d PX4: start all sensor types on PX4
this allows for secondary sensors
2013-12-09 17:34:06 +11:00
Andrew Tridgell f1bad032dd PX4: added support for the MPU6000 on the v2.4 Pixhawk 2013-11-28 21:32:12 +11:00
Andrew Tridgell 45bf96382c PX4: setup uartD on PX4
on FMUv1 enable uartD only if /fs/microsd/APM/uartD.en exists

on FMU2 always enable uartD
2013-11-23 19:29:22 +11:00
Andrew Tridgell 6448ff455f build: added new copter frame type 'single' 2013-11-13 09:21:21 +11:00
Andrew Tridgell 6deeca1cc0 build: support all copter frame types on all boards 2013-11-13 09:12:02 +11:00
Andrew Tridgell 18c3b16aa8 build: added GIT_VERSION define to Makefile build 2013-11-09 10:09:19 +11:00
Andrew Tridgell 145bbd1656 PX4: changed startup to fail if no px4io on FMUv2 2013-11-02 21:41:11 +11:00
Andrew Tridgell 561618b2b2 build: added -lrt for Linux build 2013-10-08 11:50:54 +11:00
Andrew Tridgell d73c49bebc build: override opt flags for Linux build 2013-09-28 21:24:03 +10:00
Andrew Tridgell 71d0b294c5 build: added -lpthread and SKETCHNAME in build 2013-09-28 21:24:02 +10:00
Andrew Tridgell 4c05848734 build: added Linux targets 2013-09-28 21:24:02 +10:00
Andrew Tridgell 06e29536f1 PX4: added auth command to the build 2013-09-27 15:44:31 +10:00
Andrew Tridgell 081a481a7c build: added flymaple-upload target 2013-09-25 15:46:55 +10:00
Andrew Tridgell 815be5ddfe build: fixed libmaple upload target 2013-09-24 13:51:28 +10:00
Andrew Tridgell 3df849b8d1 build: make flymaple port find libmaple in parent directory
saves some hassle for people following the instructions
2013-09-24 13:51:28 +10:00
Mike McCauley f90790a26c build: added build files for Flymaple port 2013-09-24 13:32:50 +10:00
Randy Mackay 8f16dbf95e PX4: start rgbled driver 2013-09-11 13:15:35 +09:00
Andrew Tridgell 905c84bb4c PX4: move PX4IO update to before any sensors start
this seems to make the update much more reliable, possibly as it
avoids an interrupt load from l3gd20 driver
2013-09-07 17:39:51 +10:00
Andrew Tridgell ef6407988b PX4: avoid nsh redirects in if statements
this helps avoid FAT filesystem corruption
2013-09-06 22:14:04 +10:00
Andrew Tridgell 7536e0759d PX4: enable rgbled on FMUv1 2013-09-06 08:15:31 +10:00
Andrew Tridgell 0c926c38b1 PX4: boot the FMU bootloader in ROMFS 2013-09-04 13:15:51 +10:00
Andrew Tridgell 474a6d1218 PX4: added FMU bootloader images to ROMFS
this makes it much easier for users to update their bootloaders
2013-09-04 12:53:56 +10:00
Andrew Tridgell 935546d80d PX4: setup build layout to assume PX4Firmware and PX4NuttX trees
both in directory above ardupilot
2013-08-30 13:32:23 +10:00
Andrew Tridgell 78e85b36a4 PX4: moved MAXOPTIMIZATION change to APM build system
simpler than patching Firmware
2013-08-30 13:01:34 +10:00
Andrew Tridgell 28fcb1666e PX4: fixed build for change in library layout 2013-08-30 13:01:34 +10:00
Andrew Tridgell 8efcf05835 PX4: start nsh on USB if SD card not inserted
useful for debugging
2013-08-30 13:01:34 +10:00
Andrew Tridgell f48acffc52 PX4: always rebuild module.mk
this allows for switching build between different vehicle types
2013-08-30 13:01:34 +10:00
Andrew Tridgell 699e188110 build: only use a build in $SKETCHBOOK for px4
for others it is more convenient to use /tmp, as quite a few scripts
rely on this
2013-08-30 13:01:34 +10:00
Andrew Tridgell 1230df8b0d PX4: try to start meas_airspeed driver 2013-08-30 13:01:33 +10:00
Andrew Tridgell 01e9122850 PX4: disable sensors module
this isn't needed for APM, and fails to build
2013-08-30 13:01:33 +10:00
Andrew Tridgell ad445379b5 PX4: speed up the build a lot
this avoids removal of built objects and dependencies by allowing the
PX4 build system to put all objects and dependencies in the per-board
build directories
2013-08-30 13:01:33 +10:00
Andrew Tridgell 34af601551 Build: move BUILDROOT inside SKETCHBOOK
this allows for relative paths in the px4 build
2013-08-30 13:01:33 +10:00
Andrew Tridgell 16b5f923ae PX4: remove the use of symlinks in PX4 build
this should make it more windows friendly
2013-08-30 13:01:33 +10:00
Andrew Tridgell f88bb5638b PX4: changes to startup after stacksize fix
we can redirect to FAT fs again, and remove the sleep lines
2013-08-30 13:01:33 +10:00
Andrew Tridgell 1137de1002 PX4: make upload targets depend on build targets
this allows for "make px4-v1-upload" for faster development cycles
2013-08-30 13:01:33 +10:00
Andrew Tridgell 02b8d3497e PX4: avoid writing px4io update log to SD card
this seems to be one of the causes of lockups of the FMU
2013-08-30 13:01:33 +10:00
Andrew Tridgell 2e75dd50be PX4: added a sleep before probing for PX4IO update
this makes boot more reliable for some unknown reason
2013-08-30 13:01:33 +10:00
Andrew Tridgell 50cc6b5445 PX4: implement APM/nostart in rcS
this keeps the same shell on nostart, avoiding relying on nshterm
2013-08-30 13:01:33 +10:00
Andrew Tridgell 1c1e7ed414 PX4: changed to new names for board modules 2013-08-30 13:01:33 +10:00
Andrew Tridgell 84b21eed78 PX4: fixed test logic for console 2013-08-30 13:01:33 +10:00
Andrew Tridgell 1853223f45 PX4: hide the mkdir error on boot 2013-08-30 13:01:33 +10:00
Andrew Tridgell 372c424605 PX4: added mathlib/math/filter module
needed for (unused!) l3gd20 driver
2013-08-30 13:01:33 +10:00
Andrew Tridgell 927bbc6527 PX4: enable nshterm and math/filter on FMUv2 2013-08-30 13:01:33 +10:00
Andrew Tridgell a0af499aa5 PX4: added nshterm command 2013-08-30 13:01:33 +10:00
Andrew Tridgell 200d310843 PX4: better error handling in startup script 2013-08-30 13:01:33 +10:00