bugobliterator
878940292d
HAL_ChibiOS: no need to mention END reserve for Crash Dump anymore
2021-12-01 18:17:50 +11:00
Josh Henderson
b37c214f28
CubeOrange: define HAL_CHIBIOS_ARCH_CUBE
2021-11-30 10:20:54 +11:00
Josh Henderson
b8411c22c5
CubeOrange: set default EKF_IMU_MASK
2021-11-30 10:20:54 +11:00
Jaime
5d117c6ae7
hwdef: CubeOrange Enable Serial2 and Serial3 in bootloader hwdef
2021-11-10 18:10:20 +11:00
bugobliterator
8651d99de6
HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define
2021-10-30 19:24:57 +11:00
bugobliterator
b2ffc12092
HAL_ChibiOS: define flash page for dumping crash log
2021-10-30 19:24:57 +11:00
Andrew Tridgell
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
2021-10-26 15:56:53 +11:00
Iampete1
5d5a21a4ec
AP_Hal_ChibiOS: CubeOrange: set default min IMU temp margin
2021-10-19 11:16:45 +11:00
Iampete1
6f1f26a72a
AP_Hal_ChibiOS: CubeOrange: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
b6de44cc7b
AP_HAL_ChibiOS: CubeOrange: add alt config for telem1 RTS CTS as GPIO
2021-09-29 19:55:21 +10:00
Peter Barker
70aef84997
AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT
...
No longer used
2021-08-20 10:51:19 +10:00
Andrew Tridgell
bbcce717dc
HAL_ChibiOS: stop defaulting relay pins to 54 and 55
...
this just leads to confusion
2021-07-22 07:48:12 +10:00
Andrew Tridgell
ac1e03e16a
HAL_ChibiOS: move heater gains on CubeOrange to hwdef.dat
...
this makes it easier for users using apjtool to override params
2021-06-01 08:07:49 +10:00
Andrew Tridgell
91dce554d1
HAL_ChibiOS: removed unnecessary USB product IDs from boards
2021-05-27 09:30:30 +09:00
Andrew Tridgell
098a17fe2e
HAL_ChibiOS: fixed CubeOrange ADSB param name
2021-02-13 13:06:20 +11:00
Andrew Tridgell
86fda93781
HAL_ChibiOS: added heater correction of AK09916
...
this fixes a problem with the internal compass being impacted by the
magnetic field from the heater
2021-02-09 11:32:19 +11:00
Andrew Tridgell
f93e2f6717
HAL_ChibiOS: enable 32k FRAM on H7 boards
2021-01-16 06:47:10 +11:00
Ari Krupnik
79e1f5e8bd
AP_HAL_ChibiOS: standard spelling of variant
2020-12-25 00:01:50 +11:00
bugobliterator
575a56a6b6
hwdef: CubeOrange: do power reset on peripherals and sensor at boot
2020-09-16 18:08:08 +10:00
bugobliterator
a2ee82d8d9
hwdef: use inv2 sensor checks in CubeOrange
2020-09-16 18:08:08 +10:00
Andrew Tridgell
d283dd7d00
HAL_ChibiOS: define polarity of 3.3/5v selection for PWM
2020-07-21 08:47:27 +10:00
Andrew Tridgell
c1403a2e2b
HAL_ChibiOS: fixed default CubeOrange pin for 2nd current sensor
2020-06-10 17:32:11 +10:00
Andrew Tridgell
571fbf8f71
HAL_ChibiOS: update power VALID pins
2020-06-04 09:51:27 +10:00
Andrew Tridgell
32cdfddf12
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
...
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell
e8b2b52bae
HAL_ChibiOS: removed STM32_VDD from hwdef.dat
...
use default
2020-04-28 10:32:23 +10:00
bugobliterator
a31f2e5d90
hwdef: add validation checks for CubeOrange
2020-04-10 07:04:21 +10:00
Andrew Tridgell
d35fff5186
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Andrew Tridgell
bdef7d7158
HAL_ChibiOS: fixed default fast sampling on CubeOrange and Durandal
2020-02-05 12:48:51 +11:00
Andrew Tridgell
d422825715
HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT
...
not needed any more
2019-12-18 17:18:44 +11:00
Andrew Tridgell
0a81c48d9c
HAL_ChibiOS: lower gains on CubyOrange and Yellow heater
...
this should reduce the chance of baro oscillation due to rapid change
in heater temperature
2019-11-28 21:35:29 +11:00
Michael du Breuil
21f6695acd
AP_HAL_ChibiOS: Add defaults.parm for CubeOrange and CubeYellow
2019-11-20 20:52:36 +11:00
Andrew Tridgell
e820219202
HAL_ChibiOS: changed optimisation of higher end boards to -O2
...
-O3 does not seem to be a win, and takes up a lot more flash
2019-09-28 08:57:26 +10:00
bugobliterator
cba98096e9
HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware
2019-07-25 17:05:41 +10:00
Andrew Tridgell
1919268801
HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN
...
allows for SLCAN on 2nd port
2019-07-12 17:01:21 +10:00
Siddharth Purohit
dcf17e5bc2
HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange
2019-07-12 17:01:21 +10:00
Andrew Tridgell
b12cc57c64
HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes
...
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
2019-07-11 10:24:45 +10:00
Siddharth Purohit
67c925865c
HAL_ChibiOS: add support for CAN on STM32H7 boards
2019-07-08 12:18:29 +10:00
bugobliterator
7d4a758059
hwdef: fix default battery monitor pins for CubeOrange
2019-06-28 14:18:11 +10:00
Andrew Tridgell
82b171582e
HAL_ChibiOS: added sensor config for cube varients
2019-05-30 15:39:57 +10:00
Andrew Tridgell
2b0a30a2c5
HAL_ChibiOS: ensure we don't overflow bootloader area
...
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
2019-05-06 12:36:41 +10:00
Siddharth Purohit
7b54103271
HAL_ChibiOS: set pwm select pins high for 3.3V PWMout on startup
2019-04-01 21:30:12 +11:00
Siddharth Purohit
051842ea34
HAL_ChibiOS: add support for PWM Voltage level selection on CubeYellow and CubeOrange
2019-04-01 21:30:12 +11:00
Andrew Tridgell
2842063146
HAL_ChibiOS: optimize CubeYellow build
...
and fixed comment in CubeOrange
2019-03-11 12:40:21 +11:00
Andrew Tridgell
59652ad147
HAL_ChibiOS: added more IMU devices for Hex Cube boards
2019-03-11 12:40:21 +11:00
Andrew Tridgell
2f833c92d3
HAL_ChibiOS: enable SDMMC for CubeOrange
2019-03-01 11:39:12 +11:00
Andrew Tridgell
3a2227c912
HAL_ChibiOS: updated IDs for CubeOrange
2019-02-26 18:21:13 +11:00
Andrew Tridgell
ff4614b399
HAL_ChibiOS: rename CubeH7 to CubeOrange
2019-02-26 18:21:13 +11:00
Andrew Tridgell
5c2c5efc35
HAL_ChibiOS: rename to CubeYellow
2018-07-05 07:53:48 +10:00
Andrew Tridgell
f289c71b89
HAL_ChibiOS: make CubeOrange IDs consistent with CubeBlack
2018-07-05 07:53:48 +10:00
Andrew Tridgell
47fec1859b
HAL_ChibiOS: rename cube-orange to CubeOrange
2018-07-05 07:53:48 +10:00