Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
65,823 Commits 71 Branches 509 Tags 747 MiB
Commit Graph

1258 Commits

Author SHA1 Message Date
Peter Barker ee98d75173 AP_InertialSensor: rename HAL_INS_ENABLED to AP_INERTIALSENSOR_ENABLED 2023-01-03 10:28:42 +11:00
Andy Piper 7f7305a6d9 AP_InertialSensor: use correct include for sim-on-hardware 2022-12-31 09:32:32 +11:00
Andy Piper 16ca2e1179 AP_InertialSensor: use 234Hz accel LPF and 532Hz gyro LPF on BMI088 to more closely match Invensense 
synchronize fifo reads with backend update on BMI088
 2022-12-28 18:18:26 +11:00
Andy Piper 90cdc1aa52 AP_InertialSensor: allow FFT window to be captured post-filter 
selectively apply filters twice to make sure that FFT is not tracking itself
clean-up notch disablement for non-DSP builds
use filter gyro data for FFT when analysing post-filter
always apply LPF after all of the notches
move to a phased application of window information for FFT
tap FFT gyro window at the appropriate place for downsampled FFTs
add accessor for FFT notch
document notch uses cases and flow
 2022-12-28 18:14:56 +11:00
Andy Piper 9eb561639b AP_InertialSensor: add support for reading and writing INS data from a file in SITL 
allow sketch to be stopped at end of SITL samples
 2022-12-28 18:14:56 +11:00
Peter Barker fe10f15e17 AP_InertialSensor: various SITL INS improvements 2022-11-16 10:22:33 +11:00
Peter Barker 5e21a95016 AP_InertialSensor: change namespace of MultiCopter and FixedWing params 
this stops the libraries knowing anything about AP_Vehicle
 2022-11-09 19:04:37 +11:00
bugobliterator 5096023eef AP_InertialSensor: add fast reset for ICM20602 instead of full reset on bad temp sample 2022-11-01 10:53:09 +11:00
bugobliterator 35f05738d0 AP_InertialSensor: add support for ICM45686 IMU 2022-11-01 10:41:59 +11:00
Andy Piper 55aed98f81 AP_InertialSensor: ensure that hardware AAF and notch filter are enabled on 42605 and 42609 2022-10-25 11:06:02 +11:00
Andrew Tridgell 9fa3a433f5 Revert "AP_InertialSensor: disable temperature based fifo check on ICM20602" 
This reverts commit 05f8e3c18d.

this leads to bad IMU data on ICM20602
 2022-10-22 13:01:39 +11:00
Leonardo Garcia 72c6977ea5 AP_InertialSensor: Fix BMI085 accel scaling 
Original BMI088 has 24G range so it was hardcoded for *scale* within
read_fifo_accel. Added a class variable accel_range which is assigned
the correct value when the sensor type is received (16.0 or 24.0).
 2022-10-18 11:03:34 +11:00
Andrew Tridgell c42acd553e AP_InertialSensor: use motor_mask from SITL for which outputs are motors 
generate noise based on motor_mask
 2022-10-16 20:38:19 +11:00
bugobliterator 05f8e3c18d AP_InertialSensor: disable temperature based fifo check on ICM20602 2022-10-13 10:14:59 +11:00
Iampete1 4668e1b61e AP_InertialSensor: Logging: only log single notch frequency unless per-motor, never log fixed 2022-10-05 18:30:24 +11:00
jackhong12 4a4f361a17 all: use CLASS_NO_COPY() macro 2022-10-04 11:23:04 +11:00
Andy Piper 8037e10be7 AP_InertialSensor: make sure dynamic notches always get updates so that slew limiting is not too aggressive 2022-09-21 17:41:38 +10:00
murata a6d7d39364 AP_InertialSensor: Allow gyro counts to be returned 2022-09-20 09:37:29 +10:00
murata 734692460c AP_InertialSensor: Remove line breaks from PANIC strings 2022-09-15 13:21:09 +10:00
Andy Piper fcbaa0969e AP_InertialSensor: synchronize BMI70 on fifo reads 2022-09-06 09:31:21 +10:00
Peter Barker a4773413e4 AP_InertialSensor: correct INS_generic example 
segfaults due to lack of singletoin objects in examples
 2022-08-13 20:53:29 +10:00
Andy Piper a6312ac893 AP_InertialSensor: correctly detect bad frames on regular ICM42xxx 2022-08-12 20:53:36 +10:00
Andy Piper 221ab9752e AP_InertialSensor: synchronise fifo reads on the ICM42xxx 2022-08-12 20:53:36 +10:00
Iampete1 4e4bfda05d AP_InertialSensor: vector params always use set method 2022-08-03 13:43:48 +01:00
Iampete1 ea03ea320c AP_InertialSensor: params always use set method 2022-08-03 13:43:48 +01:00
Andy Piper 8855a54720 AP_InertialSensor: use filtered data in BMI270 and implement fifo reset 
increase gyro ODR to 3.2Khz to allow higher AAF
use OSR4 on accel filter to achieve nominal 188Hz
 2022-08-03 17:06:38 +10:00
Andy Piper 155d436807 AP_InertialSensor: support for fast sampling rates on ICM-42xxx series 
thoughtfully set anti-aliasing filters on ICM-42xxx series
 2022-08-02 17:26:46 +10:00
Andrew Tridgell 2582d5fad5 AP_InertialSensor: re-enable notch filter on 42688 
thanks to Andy for pointing out this is for an internal resonance
 2022-08-02 17:26:46 +10:00
Andrew Tridgell 8a6b8fc486 AP_InertialSensor: enable 180Hz LPF on ICM42670 2022-08-02 17:26:46 +10:00
Andrew Tridgell 5b579aebce AP_InertialSensor: enable AAF at 488Hz for gyro+accel on ICM42688 
this should improve vibration handling
 2022-08-02 17:26:46 +10:00
Andrew Tridgell 5bde9b0e7c AP_InertialSensor: added support for ICM42670 IMU 2022-08-02 17:26:46 +10:00
Iampete1 98d9f07507 AP_InertialSensor: defualt accel scale vector to 1.0 2022-07-28 16:51:33 +10:00
Andrew Tridgell 97646f4164 AP_InertialSensor: support BOARD_MATCH() for IMUs 2022-07-19 15:02:31 +10:00
Peter Barker e4ce4ebed3 AP_InertialSensor: remove un-needed methods 2022-07-19 10:30:36 +10:00
Peter Barker 80e70b2fb4 AP_InertialSensor: remove voiding of parameter 
Clearly this is used - we pass it down
 2022-07-05 09:54:53 +10:00
Andrew Tridgell c29b390e7b AP_InertialSensor: implemented harmonics in SITL vibration 2022-07-03 18:47:33 +10:00
Andy Piper 193375a7e5 AP_InertialSensor: implement triple notches 2022-07-03 18:21:41 +10:00
Andy Piper 9d851a0c1a AP_InertialSensor: allow concurrent logging of both pre- and post-filter IMU data for FFT 
remove batch logging bitfields
 2022-07-03 18:19:55 +10:00
Andrew Tridgell 9ac3472b47 AP_InertialSensor: add set_inactive() on notch filters 2022-06-30 20:58:37 +10:00
Andrew Tridgell d653499efc AP_InertialSensor: count filters to match notch options 
this allows for much more complex filter setups as long as not
filtering on all IMUs
 2022-06-12 15:39:44 +10:00
Andrew Tridgell a37f268dc6 Ap_Inertialsensor: by default only run harmonic notch on the active gyro 
this should save quite a lot of CPU. Only the active gyro impacts
vehicle flight
 2022-06-12 15:39:44 +10:00
Andy Piper 11f5d1974a AP_InertialSensor: don't print error when probing non-existant BMI270 
fix device locking at startup on BMI270
 2022-06-08 21:44:21 +10:00
Andy Piper 6cacdd1b34 AP_InertialSensor: properly reset MPU6000 signal path at startup 
failure to reset the signal path as per the register spec leads to
very poor temperature response early on in startup.
 2022-06-08 17:44:17 +10:00
Andrew Tridgell 19063a46a0 AP_InertialSensor: fixed build with logging disabled 
fixes CubeOrange-periph build
 2022-06-06 14:50:40 +10:00
Tom Pittenger 798f985ee5 AP_InertialSensor: relax is_still() threshold for SITL.. which is pretty darn still all the time for Plane 2022-05-20 10:52:47 -07:00
Randy Mackay 2382e58f04 AP_InertialSensor: extend ENABLE_MASK param desc IMUs 4 to 7 2022-05-19 07:54:24 +10:00
murata 324f5e3ac9 AP_InertialSensor: Console output can be disabled 2022-05-17 09:53:06 +10:00
Andy Piper e0b7e5f2a5 AP_InertialSensor: add throttle-based notch setup function 
allocate harmonic notch filter if FFT is enabled
 2022-05-04 17:05:51 +10:00
Peter Barker 94dc0e78cd AP_InertialSensor: tidy includes 2022-05-03 09:14:58 +10:00
Leonardo Garcia 0eb6ae365a AP_InertialSensor: Added BMI085 support 
Fixed styling for 61125e2

Remove whitespace l202

Removed else
 2022-04-27 18:37:39 +10:00
Iampete1 2d2165936a AP_InertialSensor: use pitch to guess which axis the user is trying to calibrate, warn about Q_TRIM_PITCH on plane 2022-04-26 10:03:30 +10:00
Andrew Tridgell db14ba46dc AP_InertialSensor: call notch param update with semaphore held 2022-04-19 09:39:03 +10:00
Andrew Tridgell dff0e5ecc1 AP_InertialSensor: fixed the last notch values to be per-instance 
thanks to Andy for noticing this
 2022-04-19 09:39:03 +10:00
Andrew Tridgell 184f84f4ee AP_InertialSensor: don't update disabled notches 2022-04-19 09:39:03 +10:00
Andrew Tridgell e2e1e74da5 AP_InertialSensor: switch to HarmonicNotch class 
this makes the logic much easier to follow, without indexes into
arrays
 2022-04-19 09:39:03 +10:00
Andrew Tridgell e67d9b4179 AP_InertialSensor: support two full harmonic notch filters 2022-04-19 09:39:03 +10:00
Andrew Tridgell 95ae150a21 AP_InertialSensor: catch FIFO overruns on BMI088 
we have seen errors where the BMI088 gets out of sync, so that the 3
axes are rotated. The data is shifted by 4 bytes, so that X=Z, Y=X
and Z=Y

this changes the BMI088 to "stop on full" mode, which is what Bosch
use in their example drivers, and also catches FIFO overrun events and
triggers a full FIFO reset. This should fix the problem with the FIFO
sync
 2022-04-16 19:24:16 +10:00
Andrew Tridgell ab5e8419d8 AP_InertialSensor: move INS_HNTC2 to a new parameter table ID 2022-04-16 08:14:06 +10:00
Andy Piper 29e8f96275 AP_InertialSensor: move frontend update into ramfunc. 2022-04-12 09:19:45 +10:00
Peter Barker 3dae386ae3 AP_InertialSensor: correct compilation with HAL_INS_ACCELCAL_ENABLED false 2022-03-22 10:39:44 +11:00
Peter Barker a53af5277c AP_InertialSensor: assume accel cals are stored for sitl-on-hw 
Same as for SITL - they don't need to actually be in storage to be valid
 2022-03-17 14:39:55 +11:00
Peter Barker da21b48f7e AP_InertialSensor: split AP_HAL_SITL and HAL_SIM_ENABLED 2022-03-17 14:39:55 +11:00
murata efe8427279 AP_InertialSensor: Change from division to multiplication 2022-03-16 18:41:52 +11:00
Iampete1 b77476caa1 AP_InertialSensor: remove custom orentations 2022-03-02 18:16:42 +11:00
Peter Barker fda4a65e3e AP_InertialSensor: include cleanups 2022-03-01 11:21:33 +11:00
Andy Piper c7a43f2a90 AP_InertialSensor: put some functions in fast ram 
precisely split backend/frontend on Invensense for RAMFUNC allocation
allow building with no IMUs
 2022-02-09 12:47:55 +00:00
Peter Barker 558f6babc4 AP_InertialSensor: correct compilation if INS_TEMPERATURE_CAL_ENABLE is off 2022-02-08 10:44:01 +11:00
Peter Barker c1c329e2b4 AP_InertialSensor: add and use AP_SIM_INS_ENABLED 2022-01-17 19:14:39 +11:00
Jaaaky f80a9ba3ce AP_InertialSensor: Fix issue #19599 Failed to build Pixhawk1 with O3 
As suggested by @tridge
 2022-01-17 08:33:27 +11:00
Peter Barker 80178f5d07 AP_InertialSensor: mark FTN as a streamed message 2022-01-05 16:34:36 +11:00
Peter Barker 6084682634 AP_InertialSensor: move INS notch filter logging into INS 2022-01-05 16:34:36 +11:00
Andy Piper 3fd79b8ffb AP_InertialSensor: BMI270 driver 2021-12-31 09:25:29 +11:00
Andrew Tridgell 7c8794b0bd AP_InertialSensor: fixed INS_generic example 
useful for driver development
 2021-12-30 10:02:35 +11:00
Andrew Tridgell 662327f2ea AP_InertialSensor: added support for more ADIS IMUs 
support 32 bit delta angles and velocities
 2021-12-29 18:25:18 +11:00
Andy Piper 6e3b502110 AP_InertialSensor: inline vector ops for backends and temp cal 2021-12-22 18:23:33 +11:00
Andy Piper d44478ff59 AP_InertialSensor: calculate number of notches based on motor count 
configure default harmonics if dynamic harmonics
set number of notches correctly for FFT operation
include static notch in filter calculation and allow harmonic options on static notch
 2021-12-22 18:13:38 +11:00
Jaaaky bbb38504d6 AP_InertialSensor: Fix multi #include's 2021-12-21 10:38:46 +11:00
Peter Barker c6734ad825 AP_InertialSensor: correct logging of inertial-sensor reg-change logging 2021-12-18 21:25:27 +11:00
QioTek e5a8695640 AP_InertialSensor: added support for ICM-20608-D sensor 2021-12-17 07:58:48 +11:00
QioTek 586c2064a6 AP_InertialSensor: added support for IIM-42652 and ICM-40605 sensors 
handle new Invensense v3 sensor types
 2021-12-14 11:38:36 +11:00
Josh Henderson 27bcec9d6e AP_InertialSensor: for all Cubes ensure use of non-isolated IMU 2021-11-30 10:20:54 +11:00
Randy Mackay 0de96f3f4a AP_InertialSensor: vibe units m/s/s 
also specify no multiplier
 2021-11-18 13:23:06 +09:00
Andrew Tridgell 12c10dce32 AP_InertialSensor: fixed comments on IMU types supported 2021-11-09 08:05:03 +11:00
Buzz 168dc34566 AP_InertialSensor: New fallback type = NONE, which successfully does nothing like an INS, but without needing a real one, like esp32 dev boards. 
Good for boards that u want to boot even when they dont have an IMU attached.
Author: Charles Villard <charlesvillard10@gmail.com>
Author: Buzz <davidbuzz@gmail.com>
 2021-11-01 17:40:31 +11:00
Andy Piper 6a00819b2d AP_InertialSensor: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI 2021-10-26 11:42:12 +11:00
Gone4Dirt 290794bf93 AP_InertialSensor: Add APM_BUILD_Heli 2021-09-29 19:55:48 +10:00
Peter Barker dac4134533 AP_InertialSensor: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
Andrew Tridgell fefade783b AP_InertialSensor: allow accelcal with a rotation 2021-09-17 14:07:14 +10:00
Andrew Tridgell 4fdc1ebc30 AP_InertialSensor: fixed locking issue in delta accumulation 
this fixes a bug in calculating delta velocity and delta acceleration
between threads.
 2021-08-31 10:10:18 +10:00
Pierre Kancir 29b13ff98a AP_InertialSensor: fix externalAHRS detection 
'A = B >= C' kind. The expression is calculated as following: 'A = (B >= C)'
 2021-08-25 16:37:13 +09:00
Scott Parlane 4d95a9d1c3 AP_InertialSensor: BMI160: Allow configuring the rotation 2021-08-13 12:32:28 +10:00
Scott Parlane 700edd241f AP_InertialSensor: BMI160: Make it possible to use I2C 
The BMI160 chip talks the same protocol over SPI and I2C,
so simply allowing I2C in hwdef is sufficient to allow it to be used.
 2021-08-13 12:32:28 +10:00
Scott Parlane 6554c535a1 AP_InertialSensor: BMI160: Remove linux-only restriction 2021-08-13 12:32:28 +10:00
bugobliterator f20b7d0f8e AP_InertialSensor: change class name from SITL::SITL to SITL::SIM 2021-08-05 07:25:31 +10:00
Andrew Tridgell f68ed4f0a4 AP_InertialSensor: mark log messages as streaming 2021-08-03 10:23:36 +10:00
Andrew Tridgell 0f3dc195b6 AP_InertialSensor: fixed build warning 2021-07-27 19:50:21 +10:00
Siddharth Purohit c4caf2ff54 AP_InertialSensor: add HAL_INS_ENABLED 2021-06-30 17:06:02 +10:00
Siddharth Purohit 447935bf4c AP_InertialSensor: remove dependence on gcs for AP_Periph builds 2021-06-30 17:06:02 +10:00
Peter Barker 731cf038f0 AP_InertialSensor: remove @Values from param metadata where @Bitmask exists 2021-06-23 18:37:34 +10:00
Peter Barker 52a52e1e5b AP_InertialSensor: remove HIL support 2021-06-15 09:47:31 +10:00
nkruzan f4c18e0f9c AP_InertialSensor_Invensense: set reset count to 1 if 10s has passed since last reset 2021-05-25 10:46:38 +10:00
Josh Henderson 2b20dcf128 AP_InertialSensor: move GYR & ACC logging functions to Logging.cpp 2021-05-01 14:15:58 +10:00
Josh Henderson 9792202810 AP_InertialSensor: Privatize Logging 2021-04-29 19:19:12 +10:00
Andrew Tridgell b3ed4f4b12 AP_InertialSensor: fixed handling of more than 3 accel/gyro instances 
allows for first 3 to work without a panic
 2021-04-13 09:36:52 +10:00
Andrew Tridgell dcf6bcea6e AP_InertialSensor: removed assert calls 
these waste flash space and do not do us any good
 2021-03-25 14:03:40 +11:00
Tatsuya Yamaguchi 2c95093d36 AP_InertialSensor: fix temperature sensor on LSM9DS0 2021-03-16 12:09:19 +11:00
Peter Barker 2b0bf45891 AP_InertialSensor: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Pierre Kancir 67540dc5bb AP_InertialSensor: fix example 2021-03-03 18:07:38 +11:00
Pierre Kancir c8a7ab1a75 AP_InertialSensor: fix example 2021-03-03 18:07:38 +11:00
Andrew Tridgell bf999f701f AP_InertialSensor: fixed ICM-20602 y offset bug 
this works around a bug in the ICM-20602 that can cause the Y facttory
offset register to change unexpectedly. We don't know what triggers
this.

The fix is to save the factory offset at boot and restore it if it
changes. We log a message describing the change, but don't mark the
IMU unhealthy as this happens too often and we don't want to fallback
to a 2nd less good quality IMU (eg. MPU6000 on MatekH743)
 2021-02-24 18:18:37 +11:00
Andrew Tridgell 4cddf37984 AP_InertialSensor: log unexpected register changes 
when the register checking code finds an error we will log what
register changed and to what value
 2021-02-24 18:18:37 +11:00
Andrew Tridgell 85ef6b7ac6 AP_InertialSensor: added optional logging of register changes 2021-02-24 18:18:37 +11:00
Andrew Tridgell 25dd08a1fd AP_InertialSensor: added force_save_calibration() 2021-02-15 07:24:40 +11:00
Peter Barker 3da156e358 AP_InertialSensor: prevent nullptr dereference in SITL 2021-02-05 15:02:12 +11:00
Andrew Tridgell 0535c4f592 AP_InertialSensor: default TMAX to 70 
if user forgets to set this then better to just timeout rather than
calibrating over a small range
 2021-01-27 09:49:35 +11:00
Andrew Tridgell bdb364d461 AP_InertialSensor: save the accelerometer ID parameters 
this is needed for factory accel cal
 2021-01-27 09:49:35 +11:00
Andrew Tridgell 2843cfa42d AP_InertialSensor: use mavlink statustext for cal info 2021-01-25 16:24:50 +11:00
Andrew Tridgell b542f947f7 AP_InertialSensor: don't mark accels as calibrating during trim 
we need the accels with offsets applied when doing accel trim
 2021-01-25 16:24:50 +11:00
Andrew Tridgell e908a996af AP_InertialSensor: support SIM_ACC_TRIM 
and cleanup vector maths
 2021-01-25 16:24:50 +11:00
Andrew Tridgell 6c8a57c2d7 AP_InertialSensor: review fixes 2021-01-21 13:09:21 +11:00
Andrew Tridgell 3ff71c7814 AP_InertialSensor: changes from review feedback 2021-01-21 13:09:21 +11:00
Andrew Tridgell b12a663f7a AP_InertialSensor: apply accel scaling 2021-01-21 13:09:21 +11:00
Andrew Tridgell 73ddde3629 AP_InertialSensor: changes for new SITL IMU params 2021-01-21 13:09:21 +11:00
Andrew Tridgell 5e60fac37e AP_InertialSensor: remove unused variable 2021-01-21 13:09:21 +11:00
Andrew Tridgell 285b53fe07 AP_InertialSensor: use vector polyfit 
this reduces memory usage
 2021-01-21 13:09:21 +11:00
Andrew Tridgell ffe20f7958 AP_InertialSensor: use a fixed reference temperature of 35C 
this allows us to timeout the calibration when the temperature stops
rising as the polynomial no longer depends on the maximum temperature
 2021-01-21 13:09:21 +11:00
Andrew Tridgell dc58b0b950 AP_InertialSensor: changes from review feedback 
thanks Sid!
 2021-01-21 13:09:21 +11:00
Andrew Tridgell c9a83c8127 AP_InertialSensor: added INS_TCAL_OPTIONS 
make persistent params optional, and allow save of accelcal
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 1ddc21c9bb AP_InertialSensor: support saving tempcal params persistently 2021-01-21 13:09:21 +11:00
Andrew Tridgell 8caea96ab1 AP_InertialSensor: start auto-learning at boot 
This makes it easier to setup the params. The ENABLE=2 value only
takes effect at boot
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 7cb7ad3636 AP_InertialSensor: fixed build error 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2e9f61fe49 AP_InertialSensor: fixed IMU index display in msgs 
start at 1 for users
 2021-01-21 13:09:21 +11:00
Andrew Tridgell d5b511f4a0 AP_InertialSensor: fixed start timer for temperature in SITL 
when we are doing an autotest we want the temperature to start
climbing when we first set SIM_IMUT_FIXED=0
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 30e55d8dfc AP_InertialSensor: cope with user changing TMAX while calibrating 2021-01-21 13:09:21 +11:00
Andrew Tridgell e2e97c67ce AP_InertialSensor: catch user attempt to change TMAX during cal 2021-01-21 13:09:21 +11:00
Andrew Tridgell 3fb720354d AP_InertialSensor: added notify events for temperature calibration 2021-01-21 13:09:21 +11:00
Andrew Tridgell cc3579ea5d AP_InertialSensor: change TCAL sampling to be even in temperature 2021-01-21 13:09:21 +11:00
Andrew Tridgell fc0f8b990a AP_InertialSensor: added online learning of temp cal 
use INS_TCAL1_ENABLE=2 to start learning
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 6f6f89e5aa AP_InertialSensor: enable temperature sensor on LSM9DS0 
this allows for temperature calibration of the LSM303D in CubeBlack
and Pixhawk1
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 4bdf506d10 AP_InertialSensor: apply 1e-5 scale factor 
this keeps the params in a reasonable range for parameter editors
 2021-01-21 13:09:21 +11:00
Andrew Tridgell 0f6f6bac6b AP_InertialSensor: expose TCal class for use in SITL 2021-01-21 13:09:21 +11:00
Andrew Tridgell 7921e042f1 AP_InertialSensor: added IMU temperature calibration support 
this adds parameters that can be setup by an external script for
compensating for temperature variation in gyros and accels using a 3rd
order polynomial
 2021-01-21 13:09:21 +11:00
Peter Barker 239b09fb34 AP_InertialSensor: add simulator for ICM40609 2021-01-12 17:43:36 +11:00
Andrew Tridgell 957842f7eb AP_InertialSensor: added support for v3 Invensense sensors 
starting with ICM-40609, ICM-42688 and ICM-42605
 2021-01-11 14:43:35 +11:00
Andrew Tridgell b74e5c0e2f AP_InertialSensor: added ExternalAHRS backend 2021-01-05 21:13:12 +11:00
Andrew Tridgell 4f176c25de AP_InertialSensor: relax IMU wait time for low loop rates 
allow for waiting for all IMUs for up to 1/3 of the loop time
 2021-01-05 21:13:12 +11:00
murata 219dc2e7da AP_InertialSensor: Set the gravitational acceleration value to the defined value 2021-01-05 09:11:14 +09:00
Andy Piper 3db6203fb6 AP_InertialSensor: reduce FIFO buffer size to avoid DMA contention 2020-12-23 18:03:12 +11:00
Peter Barker 72acc8bfc8 AP_InertialSensor: use primary gyro (not accel) for get_delta_angle_dt 2020-11-29 13:21:53 +11:00
Peter Barker 2437cf8a24 AP_Logger: use instance number for IMU logging 2020-11-11 19:31:53 +11:00