AP_InertialSensor: BMI270 driver

This commit is contained in:
Andy Piper 2021-12-28 17:43:48 +00:00 committed by Andrew Tridgell
parent abe9e4425b
commit 3fd79b8ffb
4 changed files with 683 additions and 0 deletions

View File

@ -18,6 +18,7 @@
#include "AP_InertialSensor.h"
#include "AP_InertialSensor_BMI160.h"
#include "AP_InertialSensor_BMI270.h"
#include "AP_InertialSensor_Backend.h"
#include "AP_InertialSensor_L3G4200D.h"
#include "AP_InertialSensor_LSM9DS0.h"

View File

@ -0,0 +1,558 @@
/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <utility>
#include <AP_HAL/AP_HAL.h>
#include <AP_HAL/utility/sparse-endian.h>
#include <AP_Math/AP_Math.h>
#include "AP_InertialSensor_BMI270.h"
//#define BMI270_DEBUG
// BMI270 registers (not the complete list)
enum BMI270Register : uint8_t {
BMI270_REG_CHIP_ID = 0x00,
BMI270_REG_ERR_REG = 0x02,
BMI270_REG_STATUS = 0x03,
BMI270_REG_ACC_DATA_X_LSB = 0x0C,
BMI270_REG_GYR_DATA_X_LSB = 0x12,
BMI270_REG_SENSORTIME_0 = 0x18,
BMI270_REG_SENSORTIME_1 = 0x19,
BMI270_REG_SENSORTIME_2 = 0x1A,
BMI270_REG_EVENT = 0x1B,
BMI270_REG_INT_STATUS_0 = 0x1C,
BMI270_REG_INT_STATUS_1 = 0x1D,
BMI270_REG_INTERNAL_STATUS = 0x21,
BMI270_REG_TEMPERATURE_LSB = 0x22,
BMI270_REG_TEMPERATURE_MSB = 0x23,
BMI270_REG_FIFO_LENGTH_LSB = 0x24,
BMI270_REG_FIFO_LENGTH_MSB = 0x25,
BMI270_REG_FIFO_DATA = 0x26,
BMI270_REG_ACC_CONF = 0x40,
BMI270_REG_ACC_RANGE = 0x41,
BMI270_REG_GYRO_CONF = 0x42,
BMI270_REG_GYRO_RANGE = 0x43,
BMI270_REG_AUX_CONF = 0x44,
BMI270_REG_FIFO_DOWNS = 0x45,
BMI270_REG_FIFO_WTM_0 = 0x46,
BMI270_REG_FIFO_WTM_1 = 0x47,
BMI270_REG_FIFO_CONFIG_0 = 0x48,
BMI270_REG_FIFO_CONFIG_1 = 0x49,
BMI270_REG_SATURATION = 0x4A,
BMI270_REG_INT1_IO_CTRL = 0x53,
BMI270_REG_INT2_IO_CTRL = 0x54,
BMI270_REG_INT_LATCH = 0x55,
BMI270_REG_INT1_MAP_FEAT = 0x56,
BMI270_REG_INT2_MAP_FEAT = 0x57,
BMI270_REG_INT_MAP_DATA = 0x58,
BMI270_REG_INIT_CTRL = 0x59,
BMI270_REG_INIT_DATA = 0x5E,
BMI270_REG_ACC_SELF_TEST = 0x6D,
BMI270_REG_GYR_SELF_TEST_AXES = 0x6E,
BMI270_REG_PWR_CONF = 0x7C,
BMI270_REG_PWR_CTRL = 0x7D,
BMI270_REG_CMD = 0x7E,
};
/**
* The following device config microcode has the following copyright:
*
* Copyright (c) 2020 Bosch Sensortec GmbH. All rights reserved.
*
* BSD-3-Clause
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
const uint8_t AP_InertialSensor_BMI270::maximum_fifo_config_file[] = { BMI270_REG_INIT_DATA,
0xc8, 0x2e, 0x00, 0x2e, 0x80, 0x2e, 0x1a, 0x00, 0xc8, 0x2e, 0x00, 0x2e, 0xc8, 0x2e, 0x00, 0x2e, 0xc8, 0x2e, 0x00,
0x2e, 0xc8, 0x2e, 0x00, 0x2e, 0xc8, 0x2e, 0x00, 0x2e, 0xc8, 0x2e, 0x00, 0x2e, 0x90, 0x32, 0x21, 0x2e, 0x59, 0xf5,
0x10, 0x30, 0x21, 0x2e, 0x6a, 0xf5, 0x1a, 0x24, 0x22, 0x00, 0x80, 0x2e, 0x3b, 0x00, 0xc8, 0x2e, 0x44, 0x47, 0x22,
0x00, 0x37, 0x00, 0xa4, 0x00, 0xff, 0x0f, 0xd1, 0x00, 0x07, 0xad, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1,
0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00,
0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x80, 0x2e, 0x00, 0xc1, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x11, 0x24, 0xfc, 0xf5, 0x80, 0x30, 0x40, 0x42, 0x50, 0x50, 0x00, 0x30, 0x12, 0x24, 0xeb,
0x00, 0x03, 0x30, 0x00, 0x2e, 0xc1, 0x86, 0x5a, 0x0e, 0xfb, 0x2f, 0x21, 0x2e, 0xfc, 0xf5, 0x13, 0x24, 0x63, 0xf5,
0xe0, 0x3c, 0x48, 0x00, 0x22, 0x30, 0xf7, 0x80, 0xc2, 0x42, 0xe1, 0x7f, 0x3a, 0x25, 0xfc, 0x86, 0xf0, 0x7f, 0x41,
0x33, 0x98, 0x2e, 0xc2, 0xc4, 0xd6, 0x6f, 0xf1, 0x30, 0xf1, 0x08, 0xc4, 0x6f, 0x11, 0x24, 0xff, 0x03, 0x12, 0x24,
0x00, 0xfc, 0x61, 0x09, 0xa2, 0x08, 0x36, 0xbe, 0x2a, 0xb9, 0x13, 0x24, 0x38, 0x00, 0x64, 0xbb, 0xd1, 0xbe, 0x94,
0x0a, 0x71, 0x08, 0xd5, 0x42, 0x21, 0xbd, 0x91, 0xbc, 0xd2, 0x42, 0xc1, 0x42, 0x00, 0xb2, 0xfe, 0x82, 0x05, 0x2f,
0x50, 0x30, 0x21, 0x2e, 0x21, 0xf2, 0x00, 0x2e, 0x00, 0x2e, 0xd0, 0x2e, 0xf0, 0x6f, 0x02, 0x30, 0x02, 0x42, 0x20,
0x26, 0xe0, 0x6f, 0x02, 0x31, 0x03, 0x40, 0x9a, 0x0a, 0x02, 0x42, 0xf0, 0x37, 0x05, 0x2e, 0x5e, 0xf7, 0x10, 0x08,
0x12, 0x24, 0x1e, 0xf2, 0x80, 0x42, 0x83, 0x84, 0xf1, 0x7f, 0x0a, 0x25, 0x13, 0x30, 0x83, 0x42, 0x3b, 0x82, 0xf0,
0x6f, 0x00, 0x2e, 0x00, 0x2e, 0xd0, 0x2e, 0x12, 0x40, 0x52, 0x42, 0x00, 0x2e, 0x12, 0x40, 0x52, 0x42, 0x3e, 0x84,
0x00, 0x40, 0x40, 0x42, 0x7e, 0x82, 0xe1, 0x7f, 0xf2, 0x7f, 0x98, 0x2e, 0x6a, 0xd6, 0x21, 0x30, 0x23, 0x2e, 0x61,
0xf5, 0xeb, 0x2c, 0xe1, 0x6f
};
/*
* End of Bosch microcode copyright
*/
#define BMI270_CHIP_ID 0x24
#define BMI270_CMD_SOFTRESET 0xB6
#define BMI270_CMD_FIFOFLUSH 0xB0
#define BMI270_FIFO_ACC_EN 0x40
#define BMI270_FIFO_GYR_EN 0x80
#define BMI270_BACKEND_SAMPLE_RATE 1600
/* Datasheet says that the device powers up and soft resets in 2s, so waiting for
* 5ms before initialization is enough. */
#define BMI270_POWERUP_DELAY_MSEC 5
/* This number of samples should provide only one read burst operation on the
* FIFO most of the time (99.99%). */
#define BMI270_MAX_FIFO_SAMPLES 8
#define BMI270_HARDWARE_INIT_MAX_TRIES 5
extern const AP_HAL::HAL& hal;
AP_InertialSensor_BMI270::AP_InertialSensor_BMI270(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::Device> dev,
enum Rotation rotation)
: AP_InertialSensor_Backend(imu)
, _dev(std::move(dev))
, _rotation(rotation)
{
}
AP_InertialSensor_Backend *
AP_InertialSensor_BMI270::probe(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::SPIDevice> dev,
enum Rotation rotation)
{
if (!dev) {
return nullptr;
}
auto sensor = new AP_InertialSensor_BMI270(imu, std::move(dev), rotation);
if (!sensor) {
return nullptr;
}
if (!sensor->init()) {
delete sensor;
return nullptr;
}
return sensor;
}
AP_InertialSensor_Backend *
AP_InertialSensor_BMI270::probe(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::I2CDevice> dev,
enum Rotation rotation)
{
if (!dev) {
return nullptr;
}
auto sensor = new AP_InertialSensor_BMI270(imu, std::move(dev), rotation);
if (!sensor) {
return nullptr;
}
if (!sensor->init()) {
delete sensor;
return nullptr;
}
return sensor;
}
void AP_InertialSensor_BMI270::start()
{
_dev->get_semaphore()->take_blocking();
configure_accel();
configure_gyro();
configure_fifo();
_dev->get_semaphore()->give();
// using headerless mode so gyro and accel ODRs must match
if (!_imu.register_accel(_accel_instance, BMI270_BACKEND_SAMPLE_RATE, _dev->get_bus_id_devtype(DEVTYPE_BMI270)) ||
!_imu.register_gyro(_gyro_instance, BMI270_BACKEND_SAMPLE_RATE, _dev->get_bus_id_devtype(DEVTYPE_BMI270))) {
return;
}
// setup sensor rotations from probe()
set_gyro_orientation(_gyro_instance, _rotation);
set_accel_orientation(_accel_instance, _rotation);
/* Call _poll_data() at 1600Hz */
_dev->register_periodic_callback(1000000UL / BMI270_BACKEND_SAMPLE_RATE,
FUNCTOR_BIND_MEMBER(&AP_InertialSensor_BMI270::poll_data, void));
}
bool AP_InertialSensor_BMI270::update()
{
update_accel(_accel_instance);
update_gyro(_gyro_instance);
return true;
}
/*
read from registers, special SPI handling needed
*/
bool AP_InertialSensor_BMI270::read_registers(uint8_t reg, uint8_t *data, uint8_t len)
{
// for SPI we need to discard the first returned byte. See
// datasheet for explanation
uint8_t b[len+2];
b[0] = reg | 0x80;
memset(&b[1], 0, len+1);
if (!_dev->transfer(b, len+2, b, len+2)) {
return false;
}
memcpy(data, &b[2], len);
return true;
}
/*
write registers with retries. The SPI sensor may take
several tries to correctly write a register
*/
bool AP_InertialSensor_BMI270::write_register(uint8_t reg, uint8_t v)
{
for (uint8_t i=0; i<8; i++) {
_dev->write_register(reg, v);
uint8_t v2 = 0;
if (read_registers(reg, &v2, 1) && v2 == v) {
return true;
}
}
return false;
}
void AP_InertialSensor_BMI270::check_err_reg()
{
#ifdef BMI270_DEBUG
uint8_t err = 0;
read_registers(BMI270_REG_ERR_REG, &err, 1);
if (err) {
if ((err & 1) == 1) {
uint8_t status = 0;
read_registers(BMI270_REG_INTERNAL_STATUS, &status, 1);
switch (status & 0xF) {
case 0:
AP_HAL::panic("BMI270: not_init\n");
break;
case 2:
AP_HAL::panic("BMI270: init_err\n");
break;
case 3:
AP_HAL::panic("BMI270: drv_err\n");
break;
case 4:
AP_HAL::panic("BMI270: sns_stop\n");
break;
case 5:
AP_HAL::panic("BMI270: nvm_error\n");
break;
case 6:
AP_HAL::panic("BMI270: start_up_error\n");
break;
case 7:
AP_HAL::panic("BMI270: compat_error\n");
break;
case 1: // init ok
if ((status>>5 & 1) == 1) {
AP_HAL::panic("BMI270: axes_remap_error\n");
} else if ((status>>6 & 1) == 1) {
AP_HAL::panic("BMI270: odr_50hz_error\n");
}
break;
}
} else if ((err>>6 & 1) == 1) {
AP_HAL::panic("BMI270: fifo_err\n");
} else if ((err>>7 & 1) == 1) {
AP_HAL::panic("BMI270: aux_err\n");
} else {
AP_HAL::panic("BMI270: internal error detected %d\n", err>>1 & 0xF);
}
}
#endif
}
void AP_InertialSensor_BMI270::configure_accel()
{
// set acc in high performance mode with normal filtering at 1600Hz
write_register(BMI270_REG_ACC_CONF, 1U<<7 | 0x2U<<4 | 0x0C);
// set acc to 16G full scale
write_register(BMI270_REG_ACC_RANGE, 0x03);
check_err_reg();
}
void AP_InertialSensor_BMI270::configure_gyro()
{
// set gyro in high performance filter mode, high performance noise mode. normal filtering at 1600Hz
write_register(BMI270_REG_GYRO_CONF, 1U<<7 | 1<<6 | 2<<4 | 0x0C);
// set gyro to 2000dps full scale
// for some reason you have to enable the ois_range bit (bit 3) for 2000dps as well
// or else the gyro scale will be 250dps when in prefiltered FIFO mode (not documented in datasheet!)
write_register(BMI270_REG_GYRO_RANGE, 0x08);
check_err_reg();
}
void AP_InertialSensor_BMI270::configure_fifo()
{
// don't stop when full, disable sensortime frame
write_register(BMI270_REG_FIFO_CONFIG_0, 0x00);
// accel + gyro data in FIFO together with headers
write_register(BMI270_REG_FIFO_CONFIG_1, 1U<<7 | 1U<<6 | 1U<<4);
// unfiltered with gyro downsampled by 2^2 to give 1600Hz
write_register(BMI270_REG_FIFO_DOWNS, 0x02);
// disable advanced power save, enable FIFO self-wake
write_register(BMI270_REG_PWR_CONF, 0x02);
// Enable the gyro, accelerometer and temperature sensor - disable aux interface
write_register(BMI270_REG_PWR_CTRL, 0x0E);
// flush FIFO
write_register(BMI270_REG_CMD, BMI270_CMD_FIFOFLUSH);
check_err_reg();
}
/*
read fifo
*/
void AP_InertialSensor_BMI270::read_fifo(void)
{
uint8_t len[2];
if (!read_registers(BMI270_REG_FIFO_LENGTH_LSB, len, 2)) {
_inc_accel_error_count(_accel_instance);
_inc_gyro_error_count(_gyro_instance);
return;
}
uint16_t fifo_length = len[0] + (len[1]<<8);
if (fifo_length & 0x8000) {
// empty
return;
}
// don't read more than 8 frames at a time
if (fifo_length > BMI270_MAX_FIFO_SAMPLES*13) {
fifo_length = BMI270_MAX_FIFO_SAMPLES*13;
}
if (fifo_length == 0) {
return;
}
uint8_t data[fifo_length];
if (!read_registers(BMI270_REG_FIFO_DATA, data, fifo_length)) {
_inc_accel_error_count(_accel_instance);
_inc_gyro_error_count(_gyro_instance);
return;
}
const uint8_t *p = &data[0];
while (fifo_length >= 12) {
/*
the fifo frames are variable length, with the frame type in the first byte
*/
uint8_t frame_len = 2;
switch (p[0] & 0xFC) {
case 0x84: // accel
frame_len = 7;
parse_accel_frame(p+1);
break;
case 0x88: // gyro
frame_len = 7;
parse_gyro_frame(p+1);
break;
case 0x8C: // accel + gyro
frame_len = 13;
parse_gyro_frame(p+1);
parse_accel_frame(p+7);
break;
case 0x40:
// skip frame
frame_len = 2;
break;
case 0x44:
// sensortime frame
frame_len = 4;
break;
case 0x48:
// fifo config frame
frame_len = 2;
break;
case 0x50:
// sample drop frame
frame_len = 2;
break;
}
p += frame_len;
fifo_length -= frame_len;
}
if (temperature_counter++ == 100) {
temperature_counter = 0;
uint8_t tbuf[2];
if (!read_registers(BMI270_REG_TEMPERATURE_LSB, tbuf, 2)) {
_inc_accel_error_count(_accel_instance);
_inc_gyro_error_count(_gyro_instance);
} else {
uint16_t temp_uint11 = (tbuf[0]<<3) | (tbuf[1]>>5);
int16_t temp_int11 = temp_uint11>1023?temp_uint11-2048:temp_uint11;
float temp_degc = temp_int11 * 0.125f + 23;
_publish_temperature(_accel_instance, temp_degc);
}
}
}
void AP_InertialSensor_BMI270::parse_accel_frame(const uint8_t* d)
{
// assume configured for 16g range
const float scale = (1.0/32768.0) * GRAVITY_MSS * 16.0;
int16_t xyz[3] {
int16_t(uint16_t(d[0] | (d[1]<<8))),
int16_t(uint16_t(d[2] | (d[3]<<8))),
int16_t(uint16_t(d[4] | (d[5]<<8)))};
Vector3f accel(xyz[0], xyz[1], xyz[2]);
accel *= scale;
_rotate_and_correct_accel(_accel_instance, accel);
_notify_new_accel_raw_sample(_accel_instance, accel);
}
void AP_InertialSensor_BMI270::parse_gyro_frame(const uint8_t* d)
{
// data is 16 bits with 2000dps range
const float scale = radians(2000.0f) / 32767.0f;
int16_t xyz[3] {
int16_t(uint16_t(d[0] | d[1]<<8)),
int16_t(uint16_t(d[2] | d[3]<<8)),
int16_t(uint16_t(d[4] | d[5]<<8)) };
Vector3f gyro(xyz[0], xyz[1], xyz[2]);
gyro *= scale;
_rotate_and_correct_gyro(_gyro_instance, gyro);
_notify_new_gyro_raw_sample(_gyro_instance, gyro);
}
void AP_InertialSensor_BMI270::poll_data()
{
read_fifo();
}
bool AP_InertialSensor_BMI270::hardware_init()
{
bool ret = false;
hal.scheduler->delay(BMI270_POWERUP_DELAY_MSEC);
_dev->get_semaphore()->take_blocking();
_dev->set_speed(AP_HAL::Device::SPEED_LOW);
for (unsigned i = 0; i < BMI270_HARDWARE_INIT_MAX_TRIES; i++) {
uint8_t chip_id = 0;
/* If CSB sees a rising edge after power-up, the device interface switches to SPI
* after 200 μs until a reset or the next power-up occurs therefore it is recommended
* to perform a SPI single read of register CHIP_ID (the obtained value will be invalid)
* before the actual communication start, in order to use the SPI interface */
read_registers(BMI270_REG_CHIP_ID, &chip_id, 1);
hal.scheduler->delay(1);
write_register(BMI270_REG_CMD, BMI270_CMD_SOFTRESET);
hal.scheduler->delay(BMI270_POWERUP_DELAY_MSEC); // power on and soft reset time is 2ms
// switch to SPI mode again
read_registers(BMI270_REG_CHIP_ID, &chip_id, 1);
hal.scheduler->delay(1);
read_registers(BMI270_REG_CHIP_ID, &chip_id, 1);
if (chip_id != BMI270_CHIP_ID) {
continue;
}
// disable power save
write_register(BMI270_REG_PWR_CONF, 0x00);
hal.scheduler->delay(1); // needs to be at least 450us
// upload config
write_register(BMI270_REG_INIT_CTRL, 0x00);
// Transfer the config file, data packet includes INIT_DATA
_dev->transfer(maximum_fifo_config_file, sizeof(maximum_fifo_config_file), nullptr, 0);
// config is done
write_register(BMI270_REG_INIT_CTRL, 1);
// check the results
hal.scheduler->delay(20);
uint8_t status = 0;
read_registers(BMI270_REG_INTERNAL_STATUS, &status, 1);
if ((status & 1) == 1) {
ret = true;
hal.console->printf("BMI270 initialized after %d retries\n", i+1);
break;
}
}
_dev->set_speed(AP_HAL::Device::SPEED_HIGH);
_dev->get_semaphore()->give();
return ret;
}
bool AP_InertialSensor_BMI270::init()
{
bool ret = false;
_dev->set_read_flag(0x80);
ret = hardware_init();
if (!ret) {
hal.console->printf("BMI270: failed to init\n");
}
return ret;
}

View File

@ -0,0 +1,123 @@
/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <AP_HAL/AP_HAL.h>
#include <AP_HAL/SPIDevice.h>
#include <AP_HAL/I2CDevice.h>
#include "AP_InertialSensor.h"
#include "AP_InertialSensor_Backend.h"
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_AERO
#define BMI270_DEFAULT_ROTATION ROTATION_ROLL_180
#else
#define BMI270_DEFAULT_ROTATION ROTATION_NONE
#endif
class AP_InertialSensor_BMI270 : public AP_InertialSensor_Backend {
public:
static AP_InertialSensor_Backend *probe(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::SPIDevice> dev,
enum Rotation rotation=BMI270_DEFAULT_ROTATION);
static AP_InertialSensor_Backend *probe(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::I2CDevice> dev,
enum Rotation rotation=BMI270_DEFAULT_ROTATION);
/**
* Configure the sensors and start reading routine.
*/
void start() override;
bool update() override;
private:
AP_InertialSensor_BMI270(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::Device> dev,
enum Rotation rotation);
bool read_registers(uint8_t reg, uint8_t *data, uint8_t len);
bool write_register(uint8_t reg, uint8_t v);
/**
* If the macro BMI270_DEBUG is defined, check if there are errors reported
* on the device's error register and panic if so. The implementation is
* empty if the BMI270_DEBUG isn't defined.
*/
void check_err_reg();
/**
* Try to perform initialization of the BMI270 device.
*
* The device semaphore must be taken and released by the caller.
*
* @return true on success, false otherwise.
*/
bool hardware_init();
/**
* Try to initialize this driver.
*
* Do sensor and other required initializations.
*
* @return true on success, false otherwise.
*/
bool init();
/**
* Configure accelerometer sensor. The device semaphore must already be
* taken before calling this function.
*
* @return true on success, false otherwise.
*/
void configure_accel();
/**
* Configure gyroscope sensor. The device semaphore must already be
* taken before calling this function.
*
* @return true on success, false otherwise.
*/
void configure_gyro();
/**
* Configure FIFO.
*
* @return true on success, false otherwise.
*/
void configure_fifo();
/**
* Device periodic callback to read data from the sensors.
*/
void poll_data();
/**
* Read samples from fifo.
*/
void read_fifo();
void parse_accel_frame(const uint8_t* d);
void parse_gyro_frame(const uint8_t* d);
AP_HAL::OwnPtr<AP_HAL::Device> _dev;
enum Rotation _rotation;
uint8_t _accel_instance;
uint8_t _gyro_instance;
uint8_t temperature_counter;
static const uint8_t maximum_fifo_config_file[];
};

View File

@ -123,6 +123,7 @@ public:
DEVTYPE_INS_ICM42605 = 0x35,
DEVTYPE_INS_ICM40605 = 0x36,
DEVTYPE_INS_IIM42652 = 0x37,
DEVTYPE_BMI270 = 0x38,
};
protected: