Siddharth Purohit
2f153a3577
HAL_ChibiOS: remove singleton interface from slcan_router
2019-07-08 12:18:29 +10:00
Siddharth Purohit
67c925865c
HAL_ChibiOS: add support for CAN on STM32H7 boards
2019-07-08 12:18:29 +10:00
Peter Barker
a61028c55d
AP_HAL_ChibiOS: disable scripting if USE_FATFS=no
2019-07-08 09:55:46 +10:00
Andrew Tridgell
898150e460
HAL_ChibiOS: cope with calling delay_microseconds_boost() multiple times
...
needed for updated IMU wait code
2019-07-07 19:03:01 +10:00
Atxheli
7f3cb09da2
correct comment placement for second led
2019-07-04 08:36:33 +10:00
Hwurzburg
a9783de61c
correct include paths, uncomment alarm pin, fix conflict with rssi
2019-07-04 08:36:33 +10:00
Hwurzburg
3e3d7b8e7f
Change to "include" style for new board, fix to allow LED to be used as status indicator
2019-07-04 08:36:33 +10:00
Hwurzburg
10838387c5
Split Omnibus F4 pro and non-pro into two boards to allow pro boards to have 8 pwm outputs
2019-07-04 08:36:33 +10:00
Alexey Kozin
e5988f7153
AP_HAL_ChibiOS: fix voltage sensor connected to fmu adc
2019-07-02 06:42:11 +10:00
bugobliterator
7d4a758059
hwdef: fix default battery monitor pins for CubeOrange
2019-06-28 14:18:11 +10:00
Michael du Breuil
a34ac14ec5
AP_HAL_ChibiOS: Make BOARD_FLASH_SIZE available at configure time
2019-06-18 00:06:32 -07:00
Peter Barker
1f4de871da
AP_HAL_ChibiOS: return RC protocol being decoded
2019-06-18 11:35:38 +10:00
vierfuffzig
7780e8ed00
AP_HAL_ChibiOS: add support for AIO and OSD board types
...
this allows init on board variant without onboard baro
2019-06-18 10:10:22 +10:00
Andrew Tridgell
51e187342b
HAL_ChibiOS: move the power control changes to be only CubeBlack
...
This aims to fix #11455 . I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
2019-06-09 16:56:14 +10:00
Siddharth Purohit
a926effee5
hwdef: iomcu set pin mode to input for autodetecting heater control level
2019-06-08 14:31:01 +10:00
Lucas De Marchi
e66de36016
HAL_ChibiOS: fix I2C transaction without stop condition
...
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock. This allows time for
the I2C peripheral to continue the ack or stop.
2019-06-06 09:27:47 -07:00
Andrew Tridgell
73bc277470
HAL_ChibiOS: fixed KakuteF7 build
...
low on flash
2019-06-06 12:19:13 +10:00
Andrew Tridgell
2acaada884
HAL_ChibiOS: fixed OMNIBUSF7V2 build
...
ran out of flash for plane
2019-06-06 12:19:13 +10:00
Andrew Tridgell
bfdf857b34
HAL_ChibiOS: fixed airbotf4 build
2019-06-06 12:19:13 +10:00
Andrew Tridgell
614a059819
HAL_ChibiOS: convert more boards to using new sensor config system
2019-06-05 18:54:40 +10:00
Andrew Tridgell
ff603a1f0b
HAL_ChibiOS: convert mini-pix
2019-05-30 15:39:57 +10:00
Andrew Tridgell
4548aa162b
HAL_ChibiOS: convert mindpx-v2
2019-05-30 15:39:57 +10:00
Andrew Tridgell
91aa49ba6f
HAL_ChibiOS: convert matek boards
2019-05-30 15:39:57 +10:00
Andrew Tridgell
fca03bef8d
HAL_ChibiOS: convert F4BY
2019-05-30 15:39:57 +10:00
Andrew Tridgell
8605060dfc
HAL_ChibiOS: convert F35Lightning
2019-05-30 15:39:57 +10:00
Andrew Tridgell
288d5d6fe6
HAL_ChibiOS: convert DrotekP3Pro
2019-05-30 15:39:57 +10:00
Andrew Tridgell
d90b05f685
HAL_ChibiOS: convert all fmuv5 boards to sensor config system
2019-05-30 15:39:57 +10:00
Andrew Tridgell
03bb94599b
HAL_ChibiOS: support I2C sensor probes by bus mask
2019-05-30 15:39:57 +10:00
Andrew Tridgell
fc1ec8a465
HAL_ChibiOS: convert airbot to new config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
82b171582e
HAL_ChibiOS: added sensor config for cube varients
2019-05-30 15:39:57 +10:00
Andrew Tridgell
c36d76c213
HAL_ChibiOS: convert Pixhawk1 to new sensor config
...
saves 26k of flash, making 1M boards work for longer
2019-05-30 15:39:57 +10:00
Andrew Tridgell
eae852962e
HAL_ChibiOS: fixed case of no IMU, BARO or COMPASS config settings
2019-05-30 15:39:57 +10:00
Andrew Tridgell
068e6ea8d2
HAL_ChibiOS: convert KakuteF4 and KakuteF7 to new sensor config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
1b0bf88c8f
HAL_ChibiOS: convert crazyflie2 to new config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
b47ab5c8a9
HAL_ChibiOS: support I2C sensor config in hwdef.dat
2019-05-30 15:39:57 +10:00
Andrew Tridgell
ceb9c3b83e
HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
5eb488303c
HAL_ChibiOS: convert Pixracer to use new sensor config
2019-05-30 15:39:57 +10:00
Andrew Tridgell
e198d552a8
HAL_ChibiOS: support IMU, COMPASS and BARO lines in hwdef.dat
...
this allows for main sensors to be set in hwdef.dat, making adding new
boards simpler
2019-05-30 15:39:57 +10:00
Phillip Kocmoud
734abe3d7d
hwdef: Correct typo for mRo x2.1-777 USB PID
...
This needed to match the firmware directory which contains the compiled binaries hosted at http://firmware.ardupilot.org so that MissionPlanner can automatically download and update firmware.
2019-05-23 11:05:42 +10:00
Andrew Tridgell
59678840a8
HAL_ChibiOS: log SPI and I2C counters
2019-05-17 08:56:06 +10:00
Peter Barker
f5190d1bcc
AP_HAL_ChibiOS: use logger().WriteCritical(...) for WDOG message
2019-05-16 17:21:24 +10:00
Andrew Tridgell
0708b65c2d
AP_HAL_ChibiOS: added const for PersistentData
2019-05-15 15:33:48 +10:00
Andrew Tridgell
48302427c7
HAL_ChibiOS: rename to EXPECT_DELAY_MS()
2019-05-15 15:33:48 +10:00
Andrew Tridgell
a7eb85e1c5
HAL_ChibiOS: cope with nesting of expected_delay_ms()
2019-05-15 15:33:48 +10:00
Andrew Tridgell
8d0bca6ba9
HAL_ChibiOS: log mavlink IDs and semaphore lines for watchdog
...
this gives a better chance of tracking down a hang
2019-05-15 15:33:48 +10:00
Andrew Tridgell
1b8cbfc6a4
HAL_ChibiOS: use EXPECT_DELAY() macro
2019-05-15 15:33:48 +10:00
Andrew Tridgell
d368d95aa7
HAL_ChibiOS: removed unusued AP_Common/Semaphore.h
2019-05-15 15:33:48 +10:00
Andrew Tridgell
e3c80bf08f
HAL_ChibiOS: fixed bootloader build
2019-05-15 15:33:48 +10:00
Andrew Tridgell
d7a0eb42ee
HAL_ChibiOS: added logging of watchdog data
...
log MON msgs in the leadup to a watchdog, and log a WDOG message after
a watchdog reset
2019-05-15 15:33:48 +10:00
Andrew Tridgell
dbfe6b8019
HAL_ChibiOS: implement persistent_data for watchdog
...
this is a much simpler approach to persistent data
2019-05-15 15:33:48 +10:00