dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
43,549 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

2287 Commits

Author SHA1 Message Date
Niklas Hauser 43d859313b px4/fmu-v5/6x: Upstream power manager for FMU 
Detects and configures it correctly for the Auterion INA226-based power
modules.
 2023-09-27 10:39:31 -04:00
Daniel Agar 61aee73b91 boards: px4_fmu-v5_stackcheck disable common RC to save flash 2023-09-22 11:19:29 -04:00
David Sidrane e920bfb188 px4_fmuv6x:Fit Rev6 Sensors 2023-09-21 16:22:44 -04:00
David Sidrane 9151d582ed px4_fmu-v6:Add Sensor Set Rev 6 2023-09-21 16:22:44 -04:00
Igor Mišić c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
Daniel Agar 6bd13c5514 boards/cubepilot: cubeorange and cubeorangeplus include VectorNav INS 2023-09-15 16:32:40 -04:00
Daniel Agar f0224c5104 boards: bitcraze crazyflie21 disable ekf2 magnetometer support 2023-09-15 10:02:09 -04:00
Daniel Agar 7589ee00e8 boards: holybro kakutef7 switch to ekf2 2023-09-15 10:02:09 -04:00
Julian Oes f2bb548b27 6x: fix internal mag rotation 
From looking at the history the BMM150 rotation was initially 0. Then,
this was changed to 6 when the intent was to only change it for Skynode.

A bit later, the rotation was changed back to 0, but only for Skynode.

This tells me that rotation 0 was correct for all 6X including Skynode
all along.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-09-11 15:03:33 +12:00
alexklimaj 10ac10cb33 ARK CANnode disable OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO 2023-09-05 13:10:23 -04:00
Julian Oes 70b48dd41c cubepilot: Add support for 4. variant of Orange+ 
This adds support for the 4. hardware variant of the CubeOrange+
featuring 3 ICM45686.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-09-05 11:07:09 -04:00
alexklimaj 3d61ab84c4 Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 2023-08-30 11:40:01 -04:00
comla-x b47fa81633
boards: added SIYI N7 flight controller config 2023-08-29 11:31:33 -04:00
Julian Oes ecbc5b83a0 kakute: disable some EKF2 features 
To save flash.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-08-28 13:20:00 +02:00
Julian Oes 9d97c7c5cb kakuteh7: use EKF2 by default 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-08-28 13:20:00 +02:00
alexklimaj 6faec7ab15 ARKV6X update rev 2 heater default temp id 2023-08-24 13:23:47 -04:00
Matthias Grob 0200ef9a60
Tools/auterion: add Skynode upload scripts (#21842) 2023-08-21 08:03:07 +02:00
Peter van der Perk 068b1494fc ucans32K146: fix pwm startup 2023-08-18 12:38:50 -04:00
Alex Klimaj 0914e7feaa
new TDK IIM42653 IMU driver and ARKV6X Rev 2 2023-08-16 16:20:14 -04:00
alexklimaj 5f9443add4 ARK Jetson Carrier support 3rd power module 2023-08-14 10:41:44 -04:00
PX4 BuildBot cd015d30c8 update all px4board kconfig 2023-08-11 08:59:37 -04:00
Beat Küng ae70f9c640 attitude_estimator_q: disable ATT_ACC_COMP by default 
Improves tracking in the CI test, and I always disabled it on my vehicles
as well.
 2023-08-08 12:28:52 -04:00
Christian Rauch b689082d97 enable common barometer, IMU and magnetometer 2023-08-07 20:42:58 -04:00
Christian Rauch a128517897 skip SSH key check for simpler builds in the Docker container 2023-08-07 20:42:58 -04:00
Beat Küng 2d09ad55e3 omnibus/f4sd: disable urxce_dds_client and enable tools & load_mon 2023-08-04 11:27:31 -04:00
alexklimaj 7db667558e ARK RTK GPS support baro on I2C bus 1 instead of 2 2023-08-03 20:48:01 -04:00
Daniel Agar 444e5d2d4a boards: px4_fmu-v5_debug readd systemcmds/sd_stress 2023-07-27 14:48:41 -04:00
Julian Oes 42bdfe0fb2
boards: px4/fmu-v5 move some test commands to test config 
I would expect anyone using these test commands can just use the test config instead.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-07-27 10:36:03 -04:00
PX4 BuildBot a3a19da651 update all px4board kconfig 2023-07-27 10:24:10 -04:00
Beat Küng 8e8b35dadf px4/fmu-v6x: disable batt_smbus for now to reduce flash 2023-07-24 13:10:31 +02:00
Beat Küng 5c73d24765 boards/px4/fmu-v5/test: disable modules to reduce flash 2023-07-24 13:10:31 +02:00
Beat Küng 05a5bbe120 boards/diatone/mamba-f405-mk2: disable modules to reduce flash 2023-07-24 13:10:31 +02:00
Igor Mišić 904f18f409 boards: remove camera capture and trigger from test builds 2023-07-24 13:10:31 +02:00
PX4 BuildBot 70826c5af4 update all px4board kconfig 2023-07-18 14:28:21 -04:00
PX4 BuildBot db591f25a6 boards: update all NuttX defconfigs 2023-07-18 14:27:37 -04:00
Beat Küng 327b7e611e boards/px4/fmu-v5/test: disable modules to reduce flash 2023-07-14 07:51:01 +02:00
Beat Küng 4a18baa4bd boards/mamba-f405-mk2: disable ekf components to reduce flash 2023-07-14 07:51:01 +02:00
Loic Fernau f8c9be087b
drivers: rework NXP UWB driver (#21124) 
* UWB driver rework that uses 2 UWB MKBoards - 1 as Controller (Initiator), one as Controllee (Anchor)

Co-authored-by: NXPBrianna <108274268+NXPBrianna@users.noreply.github.com>
 2023-07-12 11:44:23 -04:00
Matthias Grob 02ab5e0704 drv_pwm_output: remove unused PWM_ defines 2023-07-10 18:58:37 +02:00
Julian Oes 745fa3720e fmu-v6x: build battery status 
This is required to process data from the ADS1115 ADC and enables the
params BATx_I_CHANNEL and BATx_V_CHANNEL.

Testing is required whether this actually works on Pixhawk 6X though.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-07-07 13:40:58 +12:00
Vincent Poon e18da100ed Add ADC_ADS1115 Parameter to FMUv6x Default Build 
Adding ADC_ADS1115 Parameter to FMUv6x Default Build to allow FMUv6X user to use ADS1115 with Analog Power Modules.
 2023-07-07 13:40:58 +12:00
Beat Küng bae413a332 v6x: start mavlink on TELEM2 for skynode 
Equivalent to v5x
 2023-07-03 16:20:41 +02:00
Igor Mišić abe0ca1307 boards/holybro/kakutef7: enable gps, osd, top, dmesg. Disable uxrce_dds 2023-07-03 11:22:33 +02:00
Igor Mišić f5193bb155 boards/holybro/kakutef7: enable rc serial singlewire 2023-07-03 11:22:33 +02:00
Igor Mišić 2307d4aa22 boards/holybro/kakutef7: remove px4_platform_config 
kakutef7 doesn't use manifest
 2023-07-03 11:22:33 +02:00
Peter van der Perk e739afe362 MR-CANHUBK3 ADAP board support, add ADC support 2023-06-27 07:24:07 -04:00
Silvan Fuhrer 2a48c1cb18 boards: disable gyro fft module for v4 to safe flash 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-06-19 16:22:42 -04:00
Niklas Hauser 8fe65c6722 Driver: Refactor MCP23009 GPIO expander into uORB driver 2023-06-19 07:58:21 +02:00
alexklimaj 51a4eafe0c ARKV6X sync with FMUV6X 2023-06-09 21:17:12 -04:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
mcsauder 1707805ed2 Remove the simulator SIH module from fmu-v5x test build and the fixedwing autotune module from the fmu-v5 test build to meet flash constraints. 2023-06-07 12:07:29 -04:00
Eric Katzfey c468266b27
boards: Update modalai fcv2 board support (#21653) 
* Removed obsolete voxl2-io directory
* Updated support for ModalAI FC v2 board
* Added UAVCAN back in and removed local position estimator and attitude estimator Q that are no longer supported.
* Removed unneeded IMU drivers
 2023-06-05 12:42:46 -04:00
Niklas Hauser ebe152fc22 fmu-v6x: Increase Mavlink UART buffers 
Our serial_test showed only ~84kB/s with the default 256 RX buffer size
with significant ~2.5ms periods of the flow control RTS pin being
asserted. Increasing size to 600 (same as FMU-v5x) brings the throughput
only to ~190kB/s, while a size of >1500 achieves ~350kB/s. Larger RX
buffers do not increase throughput anymore, while the theoretical
maximum is 375kB/s.

Transmit buffer size is increased to 10kB same as on FMUv5x to prevent
any future differences in queue behavior and throughput. serial_test
showed ~350kB/s throughput at 3kB TX buffer size, so this is just a
precaution.
 2023-06-01 07:55:21 +02:00
alexklimaj 70178b66d8 Cannode add OSD drivers 2023-05-29 14:07:38 +02:00
Daniel Agar bb0f2875a9 ekf2: disable multi-EKF across mags by default (H7 & SITL) for now 
- re-enable once the estimator selector respects configured mag
priority (at least initially) or is otherwise able to automatically
prefer an external mag over internal
 - for SITL disabled because the full matrix of esitmator instances
(IMUs X mags) was too many topics for logger currently
 2023-05-19 18:35:57 -06:00
PX4 BuildBot 38505c80be update all px4board kconfig 2023-05-08 08:48:48 -04:00
alexklimaj 2cef8a03d4 ARKV6X add ADIS16507 2023-05-06 17:11:42 -04:00
Julian Oes 40324b03f4 fmu-v6x: pulldown on RTS not required 
On CTS with DMA, we need the pulldown but not on RTS.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-05-05 02:49:25 -04:00
Julian Oes 3cc940cb06 fmu-v6c: fix Telem1, Telem2 without flow control 
When flow control is used together with DMA, we need to add a pulldown
to CTS. Without it, it assumes flow control and gets stuck when
CTS is not connected.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-05-05 08:02:58 +12:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
SalimTerryLi 7eb6535273
driver/rc/crsf: fix print format for Linux platform 2023-05-01 17:36:26 -04:00
PX4 BuildBot b74e929877 update all px4board kconfig 2023-05-01 08:59:08 -04:00
bresch 521abecbbf ekf2: remove all remaining uses of EKF2_AID_MASK 2023-04-28 22:31:17 -04:00
AlexKlimaj eb8342b477 ARK Cannode fix empty rc.serial 2023-04-28 09:31:31 -04:00
Daniel Agar b8b80e409f boards: px4_fmu-v5x_test remove drivers/telemetry to save flash 2023-04-27 20:14:26 +02:00
Daniel Agar 5b0b46ff55 boards: px4_fmu-v5x_default disable LPE and ATTQ to save flash 2023-04-27 20:14:26 +02:00
Eric Katzfey 0934d3bf24
VOXL2 snapdragon spektrum rc refactor (#21427) 
* Replaced outdated snapdragon_spektrum_rc and spektrum_rc drivers with VOXL2 board specific spektrum_rc driver
 2023-04-19 11:22:43 -04:00
Eric Katzfey 018ca6b49d
VOXL2 board support updates (#21426) 2023-04-19 11:21:02 -04:00
Julian Oes 09d86085bd kakute f7/h7/h7mini/h7v2: enable airspeed 
Without this airspeed sensors are not working which is not intuitive.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-18 07:45:52 +02:00
Thomas Stastny 82fd2987c9
fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
Beat Küng a2ce73d39d px4/fmu-v6x: increase BL baudrate for flashing via uart to 1500000 2023-04-13 07:46:49 +02:00
Julian Oes 0cfe135028 cubeorangeplus: enable bl_update 
This way the bootloader can be updated.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-10 15:19:25 +12:00
Julian Oes 728367a1dc cubeorange: enable bl_update 
This way the bootloader can be updated.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-10 15:19:25 +12:00
Daniel Agar cbc067f235 boards: include INS drivers by default on PX4 FMU (eg VectorNav VN-100, VN-200, VN-300) 2023-04-06 14:06:57 -04:00
Julian Oes 19752a7670 fmu-v2/v3: fix HW detection on CubeBlack 
This fixes the case where the hardware detection fails on CubeBlack when
a CAN device is connected to CAN1 and talking, and therefore preventing
the check from getting a clear result.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-01 10:34:24 -07:00
Julian Oes 50f8c30f10 fmu-v2/v3: refactor detection function 
This consolidates the version/revision detection function.

This should allow for actual changes in a follow up commit.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-04-01 10:34:24 -07:00
PX4 BuildBot 8306fb96ea boards: update all NuttX defconfigs 2023-03-24 10:03:14 -04:00
PX4 BuildBot efab9be488 update all px4board kconfig 2023-03-24 10:01:58 -04:00
David Sidrane 64e90b91aa
px4_fmu-v6c:Add Mini & fix Rev 1 (#21226) 2023-03-21 09:16:35 -07:00
Daniel Agar 4363b09421 ekf2: add kconfig option to enable/disable external vision fusion 2023-03-20 10:12:17 -04:00
Daniel Agar d47f96f1a5 ekf2: add kconfig option to enable/disable AUX velocity fusion 2023-03-20 10:12:17 -04:00
Daniel Agar 4270a303ab ekf2: add kconfig option to enable/disable airspeed and sideslip fusion 2023-03-20 10:12:17 -04:00
Daniel Agar 98ff1afc19 ekf2: add kconfig option to enable/disable GNSS yaw 2023-03-20 10:12:17 -04:00
Daniel Agar 8b2205810b ekf2: add kconfig option to enable/disable baro compensation 2023-03-20 10:12:17 -04:00
Daniel Agar fe0e3acf09 ekf2: add kconfig option to enable/disable drag fusion 2023-03-20 10:12:17 -04:00
alexklimaj 0ae296bfe2 ARK CANnode fix params 2023-03-16 14:32:36 -04:00
Daniel Agar 6ec2b902cc ROMFS: only copy bootloader binary if systemcmds/bl_update included 2023-03-16 09:43:56 -04:00
Alex Klimaj ea97a38b2b
Initial Cannode PWM Support (#19748) 
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
 2023-03-15 11:20:07 -04:00
Daniel Agar f0a95f9572 ekf2: add new kconfig option for multi-EKF 
- disabled if flash constrained or memory constrained
 2023-03-15 09:32:47 -04:00
Julian Oes 2605562a69 cubeorangeplus: add I2C4, start AK09918 
CubeOrange+ which have the ICM45686, also have the AK09918 connected
on the internal I2C4.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-14 08:34:28 -04:00
Julian Oes 7be3279675 cubeorangeplus: add check for SMPS support 
If NuttX is built without support for SMPS it can brick the hardware.
Therefore, I suggest that we add this additional compile-time check.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-13 22:54:41 -04:00
Julian Oes 36f430e385 cubeorangeplus: save some flash space 
We need to make space for drivers.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-13 22:53:56 -04:00
Julian Oes bee4fe9470 boards: sensor config for CubeOrange+ 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-13 22:53:56 -04:00
Julian Oes ea20217c1b kakuteh7v2/mini: EKF2 is already the default 2023-03-08 10:48:31 -05:00
Julian Oes 593b3d250d kakuteh7mini: remove duplicate param defaults 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-08 10:48:31 -05:00
Julian Oes ed49ed3903 kakuteh7v2/mini: use EKF2 without mag by default 
This switches from attitude_estimator_q to EKF2 which should now work
without mag when the params are set to SYS_HAS_MAG = 0 and
EKF2_IMU_CTRL = 7 to enable gravity fusion.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-03-08 10:48:31 -05:00
Eric Katzfey daa302cdbe
Changes to allow the commander module to be built and run on Qurt (#21186) 
* Changed exclusion to rely on the definition of PX4_STORAGEDIR
 2023-03-06 09:49:07 -05:00
Silvan Fuhrer 7edce94b93 v2_default: disable hover thrust estimator to safe flash 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-03-02 12:22:18 -05:00
Marco Räth bdb0fe77d0
v6x: fix mag orientation for V6X009010 and V6X010010 (#21194) 2023-02-28 11:01:16 +01:00
Dmitry Ponomarev a1efafc42b
drivers/cyphal: incremental fixes for fmu-v5 (#20671) 
* Cyphal: fix comparing floating-point issue

* Cyphal: fix setpoint serialization

* Cyphal: fix bug with wrong comparasion of param name and pub/sub name: remove prefix from UavcanPublisher::updateParam and UavcanDynamicPortSubscriber::updateParam and PublicationManager::updateDynamicPublications

* Cyphal: integrate UavcanEscController with PublicationManager, remove second instance of UavcanEscController from CyphalNode

* Cyphal: publish readiness with minimal frequency because according to UDRAL The drive shall enter STANDBY state automatically if the readiness subject is not updated for CONTROL_TIMEOUT

* Cyphal: increase setpoint publish rate from ~75 to 200 by removing PX4_INFO (it really significantly react on the the output rate) and changing the mixing output rate and the shedule interval

* Cyphal: restore prefix because we need it for uorb over uavcan/cyphal and add udral prefix for non uorb pub/sub

* Cyphal: fix DynamicPortSubscriber subscription: if it has multiple subscribers, it should call subscription only after updating of all port subscribers port identifiers

* Cyphal: fix SubscriptionManager: we should take care about prefix

* Cyphal: fix readiness for test motor mode

* [Cyphal] Fix dynamicsubscription, improve printinfo, enable MR-CANHUBK3 config

---------

Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
 2023-02-23 10:57:50 -05:00
Leonardo Garcia 3bdb42b6a7
mro/pixracerpro: add missing px4_platform_configure() call (#21158) 2023-02-21 09:30:39 +01:00
Daniel Agar b3eb563db4
boards: cubepilot_cubeorange_test restore sd_bench (used on test rack) 2023-02-13 23:53:54 -05:00
Julian Oes 5803f692b9 boards: update CubePilot+ test defconfig 
This is tracking upstream changes and making it build.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:36:22 -05:00
Julian Oes 01a9563955 cubeorangeplus: remove some modules to save flash 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:36:22 -05:00
Julian Oes 9d8fa38793 cubeorange: remove some modules to save flash 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:36:22 -05:00
alexklimaj e5a957ae63 boards: arkv6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS 2023-02-13 22:35:23 -05:00
Julian Oes d69d99b191 kakuteh7v2/mini: switch on VTX+ 
This just always switches the VTX+ power on.

Signed-off-by: Julian Oes <julian@oes.ch>
 2023-02-13 22:00:49 -05:00
Daniel Agar 1134d5338f
boards: sky-drones_smartap-airlink_default disable modules to save flash 2023-02-13 20:58:17 -05:00
Daniel Agar 4d95150e18
boards: px4_fmu-v4pro_test disable gyro_fft to save flash 2023-02-13 20:56:19 -05:00
Daniel Agar 299cb32aa8
boards: nxp_fmuk66-v3_test disable gyro_fft to save flash 2023-02-13 20:55:06 -05:00
Daniel Agar bc5f4f8377
boards: mro ctrl-zero-h7 and pixracer disable modules to save flash 2023-02-13 20:53:52 -05:00
Daniel Agar 70a7edbcd0
boards: cubepilot_cubeorange_default disable SIH simulator to save flash 2023-02-13 20:47:26 -05:00
Daniel Agar b14e0c21b6
boards: px4_fmu-v2_default disable sensors/vehicle_airspeed and sensors/vehicle_optical_flow to save flash 2023-02-13 20:45:28 -05:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
Eric Katzfey a4aa76f0ac
VOXL2 board updates and new Kconfig option for ROOTFSDIR 
- also includes a couple of miscellaneous changes to VOXL2 support to show Qurt messages on px4 console and put logs in the proper spot
 2023-01-30 12:03:40 -05:00
PX4 BuildBot 88038717dc update all px4board kconfig 2023-01-28 11:39:51 -05:00
Eric Katzfey e862fde084
ver: use PX4_INFO_RAW and add vendor version (#21008) 2023-01-27 07:13:37 +01:00
Eric Katzfey aae431e4d5
Removed unused variables in LED driver that were causing fatal build errors on Qurt platform (#21007) 2023-01-25 16:35:56 -08:00
PX4 BuildBot cc5509381a boards: update all NuttX defconfigs 2023-01-25 14:47:48 -05:00
PX4 BuildBot 03f681ebf8 update all px4board kconfig 2023-01-25 12:57:17 -05:00
modaltb 20b7a8c9f6
drivers/actuators/modalai_esc --> modal_io and rename UART_ESC prefix to MODAL_IO (#20995) 2023-01-24 20:24:58 -05:00
modaltb fbd2e111d0
boards/modalai/fc-v1: revert DMA changes on FCv1 for now (from #20956) 2023-01-24 14:50:05 -05:00
alexklimaj 0776c47d88 Enable ARK CANnode pwm outputs 7 and 8 2023-01-24 14:49:21 -05:00
alexklimaj ac7dc030c3 Add ARK CANnode ver command 2023-01-24 14:49:21 -05:00
Jiangxuan Chen c31867f104
support for KakuteH7v2, KakuteH7mini, and BMI270 IMU driver (#20545) 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-01-22 19:41:39 -05:00
Daniel Agar fb000e874f
boards: px4_fmu-v5_debug quiet RTC debug errors 
- test rack CUAV v5 plus is producing false positives (in this particular situation) that are failing the overall testing
 2023-01-21 11:14:28 -05:00
FriedrichTuttas 1830195d30
boards: px4_fmu-v6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS (#20974) 
- https://github.com/PX4/PX4-Autopilot/issues/20762

Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
 2023-01-21 10:19:57 -05:00
Daniel Agar 1aa8ec4537
drivers: initial VectorNav (VN-100, VN-200, VN-300) support 2023-01-20 19:09:30 -05:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
PX4 BuildBot 8d6a336b2c boards: update all NuttX defconfigs 2023-01-19 12:32:57 -05:00
PX4 BuildBot 898dbb96b4 update all px4board kconfig 2023-01-19 12:32:09 -05:00
modaltb 05d828642d
boards/modalai: FCv1 DMA optimiziation for 2Mbit UART (#20956) 
- disable unused SPI3 DMA
- enable USART2 RX/TX, UART5/6 TX, UART4 RX
 2023-01-18 23:01:57 -05:00
Daniel Agar 9d7c4b8273
boards: ark_can-flow_default disable sensors/vehicle_acceleration to save flash 2023-01-18 22:58:19 -05:00
Daniel Agar ffa9d61065
boards: px4_sitl_default include gz_bridge by default 2023-01-18 22:56:17 -05:00
alexklimaj 5eb13e4448 ARKV6X bootloader init all pwm outputs as input pulldown 2023-01-18 21:52:11 -05:00
alexklimaj 7c2da8d1ef Enable ARKV6X SPIX SYNC, enable icm426889 and iim42652 CLKIN 2023-01-18 21:52:11 -05:00
Daniel Agar 967c37ac17
boards: mro_pixracerpro_default disable examples/fake_gps to save flash 2023-01-18 21:44:09 -05:00
modaltb 8123090571
boards: modalai FCv2 BSP updates (#20958) 
- FCv2 MR1
 - configure TELEM2 for VOXL use case by default
 - use ICP201XX baro by default
 2023-01-17 21:20:16 -05:00
Siddharth Bharat Purohit 1c63d5666b
boards: add support for CubeOrange+ (#20304) 
Co-authored-by: Julian Oes <julian@oes.ch>
 2023-01-17 20:55:57 -05:00
modaltb 6f718cd48d
drivers/actuators/modalai_esc: update to use mixer module and control allocator properly 
- update motor mapping to use new UART_ESC_FUNC* auto generated params
 - add support for actuator_test msg to support Actuator Testing in QGC
 - modalai_fc-vX targets start driver if configured
 - keep track of ESC spin direction in own param
 - set ramp up param in MixerOutput to false
 2023-01-16 21:46:37 -05:00
Daniel Agar 6605378d0d
boards: px4_fmu-v6c_default disable systemcmds/serial_test to save flash 2023-01-14 19:24:47 -05:00
Daniel Agar 30a240a7a4
boards: modalai_fc-v2_default disable examples/fake_gps to save flash 2023-01-14 19:23:19 -05:00
Daniel Agar 52b9b9ba2f
simulation: restore 'gazebo' alias for 'gazebo_iris' 
- only create helper targets if Gazebo 11 found on system
 2023-01-14 17:03:18 -05:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Eric Katzfey ac80dcd7a8
Voxl2: add qurt i2c driver support and first i2c driver voxlpm 2023-01-13 19:59:41 -05:00
Tanja Baumann 0099523710
v6x: fix IMU rotations for V6X009010 and V6X010010 (#20901) 
And add V6X000010 (pixhawk base board)
 2023-01-13 14:09:35 +01:00
Eric Katzfey 2a315f86ca
Qurt specific drivers for testing and some updates to the startup process (#20917) 
* Added a couple of Qurt specific drivers for testing and some updates to Qurt startup code
 2023-01-12 20:17:30 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
SiHyun Noh 714b3d82fb
thepeach: update px4board kconfig to fix missing fw_rate_control module (#20898) 2023-01-11 10:02:46 -05:00
Eric Katzfey 89180ac0f9 Fixed Kconfig and px4board files for voxl2 2023-01-11 09:53:18 -05:00