Added comments to ADC defines with Pin numbers.
Added the GPIO_HW_{REV:VER}_DRIVE signals
Define the GPIO_nPOWER_IN_{A:C] and assign them to
BRICK1, BRICK2 and USB Valid.
Regroupped power signals and defined true logic Power Control macros
in the arch agnostic form.
Defined the same IOCTL defines for FMU GPIO IOCTL
Use the power Control macros on board_app_initialize
As done on fmuV4 on resets invoked from system (not boot) insure
we establish a low output state (discharge the pins) on PWM pins
before they become inputs as a result of the pending reset.
We also delay the reset by 400 MS to insure the 3.1 Ms pulse is
not too close to the last PWM pulse.
The LTC4417 provides a valid signals for brick1, brick 2 and USB
This change configures the GIOP and provides 1) a MACRO to read
the pin and 2) the IOCTL defines to read it from the FMU.
The macro's result is true logic: It is true when the signal is active.
(Active low on the the LTC4417). The IOCTL read would be the actual
pin state.
The V4 HW replaced the LTC4417 provided valid signal for USB.
with an active high, version. This commit configures the GIOP
and provides 1) a MACRO to read the pin and the IOCTL defines
to read it from the FMU. The macro result true logic: true
when the signal is high. The IOCTL read would be the actual
pin state.
The LTC4417 provides a valid signal for USB. This change
configures the GIOP and provides 1) True logic macro to
read the pin and the IOCTL defines to read it from the FMU.
The macro will return true when the signal is active (low
on the LTC4417). The IOCTL will read be the actual pin state.
Moving forward we want all the board configs to drive the
configuration. This is just cleanup to give a clear
example of how ADC should be defined by a simple list,
based on ADC pin number as related to the GPIO and
channel number. Then the xxx_CHANNEL bit are
used to form the ADC_CHANNELS (mask). The GPIO
will are used to for a list for initalization.
Test flights reported the warning `[load_mon] log_writer_file low on stack! (292 bytes left)`
Increase stack size from 1060 to 1072 (=8 + 1060 rounded to next multiple of 8).
Rename nuttx patch
Add nuttx patch for unused variable error
Pending nuttx patch
Backport nuttx fix for unused variables in nsh_proccmds.c
Fix Patch format
Modify pending patch to match new nuttx PR
Move accepted nuttx changes from pending patch to backport patch
The error was:
Firmware/src/systemcmds/hardfault_log/hardfault_log.c:312:7: error: specified bound 30 equals the size of the destination [-Werror=stringop-overflow=]
strncat(marker, sp_name, sizeof(marker));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This prevents the compiler from optimising pdump. The error was:
Firmware/src/drivers/boards/common/board_crashdump.c:41:2: error: 'memset' writing 3240 bytes into a region of size 4 overflows the destination [-Werror=stringop-overflow=]
memset(pdump, 0, sizeof(fullcontext_s));
This PR is preliminary ground work for FMUv5.
PX4 does not use the NuttX adc driver. But used the same format
for the data returned by the nuttx ADC driver.
There was a fixme:in src/platforms/px4_adc.h "this needs to be
a px4_adc_msg_s type" With this PR the need for
src/platforms/px4_adc.h goes away as the driver drv_adc.h now
describes the px4_adc_msg_t.
David Sidrane
Simone Guscetti
Julien Lecoeur
Julien Lecoeur
Carl Olsson
Beat Küng