forked from Archive/PX4-Autopilot
px4fmu-v5:GPIO Clean up per FMUv5 Spec.
Added comments to ADC defines with Pin numbers.
Added the GPIO_HW_{REV:VER}_DRIVE signals
Define the GPIO_nPOWER_IN_{A:C] and assign them to
BRICK1, BRICK2 and USB Valid.
Regroupped power signals and defined true logic Power Control macros
in the arch agnostic form.
Defined the same IOCTL defines for FMU GPIO IOCTL
Use the power Control macros on board_app_initialize
This commit is contained in:
David Sidrane
parent
d33b945db6
commit
14ce28b1f3
|
|
@ -221,44 +221,52 @@ __BEGIN_DECLS
|
|||
#define ADC1_CH(n) (n)
|
||||
#define ADC1_GPIO(n) GPIO_ADC1_IN##n
|
||||
|
||||
/* Define GPIO pins used as ADC N.B. Channel numbers must match below */
|
||||
|
||||
#define PX4_ADC_GPIO \
|
||||
ADC1_GPIO(0), \
|
||||
ADC1_GPIO(1), \
|
||||
ADC1_GPIO(2), \
|
||||
ADC1_GPIO(3), \
|
||||
ADC1_GPIO(4), \
|
||||
ADC1_GPIO(8), \
|
||||
ADC1_GPIO(10), \
|
||||
ADC1_GPIO(11), \
|
||||
ADC1_GPIO(12), \
|
||||
ADC1_GPIO(13), \
|
||||
ADC1_GPIO(14)
|
||||
/* PA0 */ ADC1_GPIO(0), \
|
||||
/* PA1 */ ADC1_GPIO(1), \
|
||||
/* PA2 */ ADC1_GPIO(2), \
|
||||
/* PA3 */ ADC1_GPIO(3), \
|
||||
/* PA4 */ ADC1_GPIO(4), \
|
||||
/* PB8 */ ADC1_GPIO(8), \
|
||||
/* PC0 */ ADC1_GPIO(10), \
|
||||
/* PC1 */ ADC1_GPIO(11), \
|
||||
/* PC2 */ ADC1_GPIO(12), \
|
||||
/* PC3 */ ADC1_GPIO(13), \
|
||||
/* PC4 */ ADC1_GPIO(14)
|
||||
|
||||
/* Define Channel numbers must match above GPIO pin IN(n)*/
|
||||
|
||||
#define ADC_BATTERY_VOLTAGE_CHANNEL ADC1_CH(0)
|
||||
#define ADC_BATTERY_CURRENT_CHANNEL ADC1_CH(1)
|
||||
#define ADC_BATTERY1_VOLTAGE_CHANNEL ADC1_CH(2)
|
||||
#define ADC_BATTERY1_CURRENT_CHANNEL ADC1_CH(3)
|
||||
#define ADC1_SPARE_2_CHANNEL ADC1_CH(4)
|
||||
#define ADC_RC_RSSI_CHANNEL ADC1_CH(8)
|
||||
#define ADC_SCALED_V5_CHANNEL ADC1_CH(10)
|
||||
#define ADC_SCALED_VDD_3V3_SENSORS_CHANNEL ADC1_CH(11)
|
||||
#define HW_VER_SENSE_CHANNEL ADC1_CH(12)
|
||||
#define HW_REV_SENSE_CHANNEL ADC1_CH(13)
|
||||
#define ADC1_SPARE_1_CHANNEL ADC1_CH(14)
|
||||
#define ADC_BATTERY1_VOLTAGE_CHANNEL /* PA0 */ ADC1_CH(0)
|
||||
#define ADC_BATTERY1_CURRENT_CHANNEL /* PA1 */ ADC1_CH(1)
|
||||
#define ADC_BATTERY2_VOLTAGE_CHANNEL /* PA2 */ ADC1_CH(2)
|
||||
#define ADC_BATTERY2_CURRENT_CHANNEL /* PA3 */ ADC1_CH(3)
|
||||
#define ADC1_SPARE_2_CHANNEL /* PA4 */ ADC1_CH(4)
|
||||
#define ADC_RSSI_IN_CHANNEL /* PB8 */ ADC1_CH(8)
|
||||
#define ADC_SCALED_V5_CHANNEL /* PC0 */ ADC1_CH(10)
|
||||
#define ADC_SCALED_VDD_3V3_SENSORS_CHANNEL /* PC1 */ ADC1_CH(11)
|
||||
#define ADC_HW_VER_SENSE_CHANNEL /* PC2 */ ADC1_CH(12)
|
||||
#define ADC_HW_REV_SENSE_CHANNEL /* PC3 */ ADC1_CH(13)
|
||||
#define ADC1_SPARE_1_CHANNEL /* PC4 */ ADC1_CH(14)
|
||||
|
||||
#define ADC_CHANNELS ((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
|
||||
(1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
|
||||
(1 << ADC_BATTERY_CURRENT_CHANNEL) | \
|
||||
(1 << ADC_BATTERY1_VOLTAGE_CHANNEL) | \
|
||||
(1 << ADC_BATTERY1_CURRENT_CHANNEL) | \
|
||||
(1 << ADC1_SPARE_2_CHANNEL) | \
|
||||
(1 << ADC_RC_RSSI_CHANNEL) | \
|
||||
(1 << ADC_SCALED_V5_CHANNEL) | \
|
||||
(1 << ADC_SCALED_VDD_3V3_SENSORS_CHANNEL) | \
|
||||
(1 << HW_VER_SENSE_CHANNEL) | \
|
||||
(1 << HW_REV_SENSE_CHANNEL) | \
|
||||
(1 << ADC1_SPARE_1_CHANNEL))
|
||||
#define ADC_CHANNELS \
|
||||
((1 << ADC_BATTERY1_VOLTAGE_CHANNEL) | \
|
||||
(1 << ADC_BATTERY1_CURRENT_CHANNEL) | \
|
||||
(1 << ADC_BATTERY2_VOLTAGE_CHANNEL) | \
|
||||
(1 << ADC_BATTERY2_CURRENT_CHANNEL) | \
|
||||
(1 << ADC1_SPARE_2_CHANNEL) | \
|
||||
(1 << ADC_RSSI_IN_CHANNEL) | \
|
||||
(1 << ADC_SCALED_V5_CHANNEL) | \
|
||||
(1 << ADC_SCALED_VDD_3V3_SENSORS_CHANNEL) | \
|
||||
(1 << ADC_HW_VER_SENSE_CHANNEL) | \
|
||||
(1 << ADC_HW_REV_SENSE_CHANNEL) | \
|
||||
(1 << ADC1_SPARE_1_CHANNEL))
|
||||
|
||||
/* HW Version and Revision drive signals Default to 1 to detect */
|
||||
|
||||
#define GPIO_HW_REV_DRIVE /* PH14 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTH|GPIO_PIN14)
|
||||
#define GPIO_HW_VER_DRIVE /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
|
||||
|
||||
/* CAN Silence
|
||||
*
|
||||
|
|
@ -356,28 +364,35 @@ __BEGIN_DECLS
|
|||
|
||||
/* Power supply control and monitoring GPIOs */
|
||||
|
||||
#define GPIO_POWER_IN_A /* PG1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
|
||||
#define GPIO_POWER_IN_B /* PG2 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN2)
|
||||
#define GPIO_POWER_IN_C /* PG3 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN3)
|
||||
#define GPIO_nPOWER_IN_A /* PG1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
|
||||
#define GPIO_nPOWER_IN_B /* PG2 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN2)
|
||||
#define GPIO_nPOWER_IN_C /* PG3 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN3)
|
||||
|
||||
#define GPIO_VDD_BRICK_VALID GPIO_POWER_IN_A /* Legacy */
|
||||
#define GPIO_VDD_BRICK1_VALID GPIO_POWER_IN_A /* Brick 1 Is Choose */
|
||||
#define GPIO_VDD_BRICK2_VALID GPIO_POWER_IN_B /* Brick 2 Is Choose */
|
||||
#define GPIO_nVDD_BRICK1_VALID GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
|
||||
#define GPIO_nVDD_BRICK2_VALID GPIO_nPOWER_IN_B /* Brick 2 Is Chosen */
|
||||
#define BOARD_NUMBER_BRICKS 2
|
||||
#define GPIO_VDD_USB_VALID GPIO_POWER_IN_C /* USB Is Choose */
|
||||
#define GPIO_nVDD_USB_VALID GPIO_nPOWER_IN_C /* USB Is Chosen */
|
||||
|
||||
#define GPIO_VDD_3V3_SENSORS_EN /* PE3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
|
||||
#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN /* PE4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
|
||||
#define GPIO_nVDD_5V_PERIPH_EN /* PG4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN4)
|
||||
#define GPIO_VDD_5V_RC_EN /* PG5 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN5)
|
||||
#define GPIO_VDD_5V_WIFI_EN /* PG6 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN5)
|
||||
#define GPIO_nVDD_5V_PERIPH_OC /* PE15 */ (GPIO_INPUT |GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
|
||||
#define GPIO_nVDD_5V_HIPOWER_EN /* PF12 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTF|GPIO_PIN12)
|
||||
#define GPIO_nVDD_5V_HIPOWER_OC /* PG13 */ (GPIO_INPUT |GPIO_PULLUP|GPIO_PORTF|GPIO_PIN13)
|
||||
#define GPIO_VDD_3V3_SENSORS_EN /* PE3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN3)
|
||||
#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN /* PE4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4)
|
||||
#define GPIO_VDD_5V_RC_EN /* PG5 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN5)
|
||||
#define GPIO_VDD_5V_WIFI_EN /* PG6 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN5)
|
||||
#define GPIO_VDD_3V3_SD_CARD_EN /* PG7 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN7)
|
||||
|
||||
/* Active High SD Card Power enable */
|
||||
|
||||
#define SD_CARD_POWER_CTRL(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
|
||||
/* Define True logic Power Control in arch agnostic form */
|
||||
|
||||
#define GPIO_nVDD_5V_PERIPH_OC /* PE15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
|
||||
#define VDD_5V_PERIPH_EN(on_true) px4_arch_gpiowrite(GPIO_nVDD_5V_PERIPH_EN, !(on_true))
|
||||
#define VDD_5V_HIPOWER_EN(on_true) px4_arch_gpiowrite(GPIO_nVDD_5V_HIPOWER_EN, !(on_true))
|
||||
#define VDD_3V3_SENSORS_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, (on_true))
|
||||
#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (on_true))
|
||||
#define VDD_5V_RC_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_5V_RC_EN, (on_true))
|
||||
#define VDD_5V_WIFI_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_5V_WIFI_EN, (on_true))
|
||||
#define VDD_3V3_SD_CARD_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
|
||||
|
||||
/* Tone alarm output */
|
||||
#define TONE_ALARM_TIMER 9 /* timer 9 */
|
||||
|
|
@ -418,7 +433,7 @@ __BEGIN_DECLS
|
|||
|
||||
/* Power switch controls ******************************************************/
|
||||
|
||||
#define SPEKTRUM_POWER(_on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (_on_true))
|
||||
#define SPEKTRUM_POWER(_on_true) VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
|
||||
|
||||
/*
|
||||
* FMUv5 has a separate RC_IN
|
||||
|
|
@ -456,10 +471,12 @@ __BEGIN_DECLS
|
|||
* provides the true logic GPIO BOARD_ADC_xxxx macros.
|
||||
*/
|
||||
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
|
||||
#define BOARD_ADC_BRICK_VALID (px4_arch_gpioread(GPIO_VDD_BRICK_VALID))
|
||||
#define BOARD_ADC_BRICK1_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
|
||||
#define BOARD_ADC_BRICK2_VALID (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
|
||||
#define BOARD_ADC_USB_VALID (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
|
||||
#define BOARD_ADC_SERVO_VALID (1)
|
||||
#define BOARD_ADC_PERIPH_5V_OC (px4_arch_gpioread(GPIO_nVDD_5V_PERIPH_OC))
|
||||
#define BOARD_ADC_HIPOWER_5V_OC (0)
|
||||
#define BOARD_ADC_PERIPH_5V_OC (!px4_arch_gpioread(GPIO_nVDD_5V_PERIPH_OC))
|
||||
#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_nVDD_5V_HIPOWER_OC))
|
||||
|
||||
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
|
||||
|
||||
|
|
@ -472,43 +489,51 @@ __BEGIN_DECLS
|
|||
{GPIO_GPIO5_INPUT, GPIO_GPIO5_OUTPUT, 0}, \
|
||||
{GPIO_GPIO6_INPUT, GPIO_GPIO6_OUTPUT, 0}, \
|
||||
{GPIO_GPIO7_INPUT, GPIO_GPIO7_OUTPUT, 0}, \
|
||||
{GPIO_POWER_IN_A, 0, 0}, \
|
||||
{GPIO_POWER_IN_B, 0, 0}, \
|
||||
{GPIO_POWER_IN_C, 0, 0}, \
|
||||
{0, GPIO_VDD_3V3_SENSORS_EN, 0}, \
|
||||
{GPIO_VDD_BRICK_VALID, 0, 0}, \
|
||||
{0, GPIO_VDD_3V3_SPEKTRUM_POWER_EN, 0}, \
|
||||
{GPIO_nPOWER_IN_A, 0, 0}, \
|
||||
{GPIO_nPOWER_IN_B, 0, 0}, \
|
||||
{GPIO_nPOWER_IN_C, 0, 0}, \
|
||||
{0, GPIO_nVDD_5V_PERIPH_EN, 0}, \
|
||||
{GPIO_nVDD_5V_PERIPH_OC, 0, 0}, \
|
||||
{0, GPIO_nVDD_5V_HIPOWER_EN, 0}, \
|
||||
{GPIO_nVDD_5V_HIPOWER_OC,0, 0}, \
|
||||
{0, GPIO_VDD_3V3_SENSORS_EN, 0}, \
|
||||
{0, GPIO_VDD_3V3_SPEKTRUM_POWER_EN, 0}, \
|
||||
{0, GPIO_VDD_5V_RC_EN, 0}, \
|
||||
{0, GPIO_VDD_5V_WIFI_EN, 0}, \
|
||||
{0, GPIO_VDD_3V3_SD_CARD_EN, 0}, }
|
||||
{0, GPIO_VDD_3V3_SD_CARD_EN, 0}, \
|
||||
{0, GPIO_HW_REV_DRIVE, 0}, \
|
||||
{0, GPIO_HW_VER_DRIVE, 0}, \
|
||||
}
|
||||
|
||||
/*
|
||||
* GPIO numbers.
|
||||
*
|
||||
* There are no alternate functions on this board.
|
||||
*/
|
||||
#define GPIO_SERVO_1 (1<<0) /**< servo 1 output */
|
||||
#define GPIO_SERVO_2 (1<<1) /**< servo 2 output */
|
||||
#define GPIO_SERVO_3 (1<<2) /**< servo 3 output */
|
||||
#define GPIO_SERVO_4 (1<<3) /**< servo 4 output */
|
||||
#define GPIO_SERVO_5 (1<<4) /**< servo 5 output */
|
||||
#define GPIO_SERVO_6 (1<<5) /**< servo 6 output */
|
||||
#define GPIO_SERVO_7 (1<<6) /**< servo 7 output */
|
||||
#define GPIO_SERVO_8 (1<<7) /**< servo 8 output */
|
||||
#define GPIO_SERVO_1 (1<<0) /**< servo 1 output */
|
||||
#define GPIO_SERVO_2 (1<<1) /**< servo 2 output */
|
||||
#define GPIO_SERVO_3 (1<<2) /**< servo 3 output */
|
||||
#define GPIO_SERVO_4 (1<<3) /**< servo 4 output */
|
||||
#define GPIO_SERVO_5 (1<<4) /**< servo 5 output */
|
||||
#define GPIO_SERVO_6 (1<<5) /**< servo 6 output */
|
||||
#define GPIO_SERVO_7 (1<<6) /**< servo 7 output */
|
||||
#define GPIO_SERVO_8 (1<<7) /**< servo 8 output */
|
||||
|
||||
#define GPIO_POWER_INPUT_A (1<<8) /**<PG1 GPIO_POWER_IN_A */
|
||||
#define GPIO_POWER_INPUT_B (1<<9) /**<PG2 GPIO_POWER_IN_B */
|
||||
#define GPIO_POWER_INPUT_C (1<<10) /**<PG3 GPIO_POWER_IN_C */
|
||||
#define GPIO_nPOWER_INPUT_A (1<<8) /**<PG1 GPIO_nPOWER_IN_A */
|
||||
#define GPIO_nPOWER_INPUT_B (1<<9) /**<PG2 GPIO_nPOWER_IN_B */
|
||||
#define GPIO_nPOWER_INPUT_C (1<<10) /**<PG3 GPIO_nPOWER_IN_C */
|
||||
|
||||
#define GPIO_3V3_SENSORS_EN (1<<11) /**< PE3 - VDD_3V3_SENSORS_EN */
|
||||
#define GPIO_BRICK_VALID (1<<12) /**< PB10 - !VDD_BRICK_VALID */
|
||||
#define GPIO_SPEKTRUM_POWER (1<<13) /**< PE4 - GPIO_VDD_3V3_SPEKTRUM_POWER_EN */
|
||||
|
||||
#define GPIO_PERIPH_5V_POWER_EN (1<<14) /**< PG4 - GPIO_PERIPH_5V_EN */
|
||||
#define GPIO_RC_POWER_EN (1<<15) /**< PG5 - GPIO_VDD_5V_RC_EN */
|
||||
#define GPIO_WIFI_POWER_EN (1<<16) /**< PG6 - GPIO_VDD_5V_WIFI_EN */
|
||||
#define GPIO_SD_CARD_POWER_EN (1<<17) /**< PG7 - GPIO_VDD_3V3_SD_CARD_EN */
|
||||
#define GPIO_PERIPH_5V_POWER_EN (1<<11) /**< PG4 - GPIO_nVDD_5V_PERIPH_EN */
|
||||
#define GPIO_PERIPH_5V_POWER_OC (1<<12) /**< PE15 - GPIO_nVDD_5V_PERIPH_OC */
|
||||
#define GPIO_PERIPH_5V_HIPOWER_EN (1<<13) /**< PF12 - GPIO_nVDD_5V_HIPOWER_EN */
|
||||
#define GPIO_PERIPH_5V_HIPOWER_OC (1<<14) /**< PG13 - GPIO_nVDD_5V_HIPOWER_OC */
|
||||
#define GPIO_3V3_SENSORS_EN (1<<15) /**< PE3 - VDD_3V3_SENSORS_EN */
|
||||
#define GPIO_SPEKTRUM_POWER (1<<16) /**< PE4 - GPIO_VDD_3V3_SPEKTRUM_POWER_EN */
|
||||
#define GPIO_RC_POWER_EN (1<<17) /**< PG5 - GPIO_VDD_5V_RC_EN */
|
||||
#define GPIO_WIFI_POWER_EN (1<<18) /**< PG6 - GPIO_VDD_5V_WIFI_EN */
|
||||
#define GPIO_SD_CARD_POWER_EN (1<<19) /**< PG7 - GPIO_VDD_3V3_SD_CARD_EN */
|
||||
#define GPIO_HW_REV_DRIVE_EN (1<<20) /**< PH14 - GPIO_HW_REV_DRIVE */
|
||||
#define GPIO_HW_VER_DRIVE_EN (1<<21) /**< PG0 - GPIO_HW_VER_DRIVE */
|
||||
|
||||
/* This board provides a DMA pool and APIs */
|
||||
|
||||
|
|
|
|||
|
|
@ -264,6 +264,15 @@ stm32_boardinitialize(void)
|
|||
|
||||
__EXPORT int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
/* Power on Interfaces */
|
||||
|
||||
VDD_3V3_SD_CARD_EN(true);
|
||||
VDD_5V_PERIPH_EN(true);
|
||||
VDD_5V_HIPOWER_EN(true);
|
||||
VDD_3V3_SENSORS_EN(true);
|
||||
VDD_3V3_SPEKTRUM_POWER_EN(true);
|
||||
VDD_5V_RC_EN(true);
|
||||
VDD_5V_WIFI_EN(true);
|
||||
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue