dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
43,618 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

336 Commits

Author SHA1 Message Date
David Sidrane b45e0dd872 holybro_durandal-v1: Update nsh defconfig NuttX 10.1.0+ 2021-08-13 14:22:00 -04:00
David Sidrane ec61512cdf NuttX inits null console 2021-08-13 14:22:00 -04:00
Daniel Agar 2ad448a4e8 boards: holybro_pix32v5 remove unused test build 2021-08-08 14:20:58 -04:00
Beat Küng 0e1f3a2d62 px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name 2021-08-03 10:36:25 +02:00
Kirill Shilov e13884410b heater: added support of inverted IMU heat controller output 2021-07-20 10:37:53 -04:00
Daniel Agar 774ad80ba0 systemcmds/tests: split out microbenchmarks and remove obsolete tests 
- reorganize Jenkins HIL tests
 2021-07-18 18:02:33 -04:00
David Sidrane 05bdef867d Track NuttX syslog change 2021-06-16 17:07:47 +02:00
David Sidrane 62fd132047 boards:Use inttypes 
nxp_ucans32k146:Fix constant

spracing_h7extreme:Use inttypes
 2021-06-16 17:07:47 +02:00
echoG 6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library 2021-06-09 12:17:45 -04:00
Daniel Agar 5f775b508f boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7 2021-06-01 15:19:15 -04:00
David Sidrane 32e92ba817 Revert:Pull downs - bad levels cause motor spins 2021-06-01 15:18:47 -04:00
David Sidrane 973068ebfe holybro_can-gps-v1:Rev to RC9 HW 
holybro_can-gps-v1:Fix LEDs

holybro_can-gps-v1:Only CAN1

holybro_can-gps-v1:ncp5623c at 0x39
 2021-05-29 10:53:27 -04:00
Daniel Agar 51f738e54c boards: bootloader.cmake trivial whitespace cleanup 2021-05-28 23:56:20 -04:00
Jukka Laitinen 071eaef884 Adjust paths to bootloader include files for boards 
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-05-26 12:57:37 -07:00
Daniel Agar c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering 
- fake_imu now publishes sine sweeps over 10 seconds
 - accel is also published so that fake IMU can be selected when the only option
 2021-05-17 20:26:25 -04:00
David Sidrane 3779ff3690 holybro_pix32v5: Disable OTG_ID_GPIO 2021-05-05 20:48:06 +02:00
David Sidrane 21cf26a69f holybro_durandal-v1: Disable OTG_ID_GPIO 2021-05-05 20:48:06 +02:00
David Sidrane 9c761d9ae5 holybro_pix32v5: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
David Sidrane b3b74eaaf6 holybro_kakutef7: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
David Sidrane 4c8dca738c holybro_durandal-v1: Initalize PWM as input with Pull Downs 2021-05-05 20:48:06 +02:00
Beat Küng 2219e096d7 cmake: embed param metadata if not CONSTRAINED_FLASH and not "test" LABEL 2021-04-15 08:16:51 +02:00
Daniel Agar 58b40fbbb9 boards: move testing to dedicated test variants 2021-04-14 09:21:31 +02:00
Daniel Agar ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) 
- include icm20948 on most boards by default
 - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
 2021-04-04 21:18:16 -04:00
David Sidrane f63f1f3969 holybro durandal-v1:Add remaining SRAM4 & DTCM to heap 2021-04-03 14:13:23 -04:00
David Sidrane 2fcdadfbd1 holybro_durandal-v1:Enable UAVCAN 2021-04-03 12:47:20 +02:00
Beat Küng 369d375417 holybro_can-gps-v1_debug: disable ekf & listener due to flash overflow 2021-04-01 08:35:36 -04:00
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar 631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Daniel Agar e58af90bac boards: holybro can-gps-v1 create separate default and debug variants 2021-03-28 12:39:22 -04:00
Daniel Agar e77bffe582 boards: STM32H7 remove CONFIG_MM_REGIONS=3 2021-03-26 17:40:44 -04:00
David Sidrane 4eabee00d6 holybro durandal-v1:Properly configure BDMA 2021-03-23 05:52:27 -07:00
David Sidrane 3581099c09 Revert "boards: disable BDMA on STM32H7 for now" 
This reverts commit f0d1f1d679.
 2021-03-23 05:52:27 -07:00
David Sidrane 216959e221 holybro durandal-v1:Enable ADC3 in support of temperature sensing 2021-03-19 15:48:47 +01:00
Daniel Agar 00016e53fa boards: holybro/kakutef7 disable CONSTRAINED_FLASH to increase optimization 2021-03-16 10:30:32 +01:00
Daniel Agar 4b99bd2077 boards: remove optional external ADIS IMUs to save flash 2021-03-15 13:37:24 -04:00
Daniel Agar 2257c3767e simple gyro auto calibration module 2021-03-15 09:46:47 +01:00
Daniel Agar f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar a0b9b44ff6 boards: stm32h7 set CONFIG_SDMMC1 consistently 2021-03-09 09:37:05 -05:00
David Sidrane c2a5b5ed88 holybro_durandal-v1:Use Auto LSE Drive setting 2021-03-05 15:40:09 -05:00
Daniel Agar 19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Beat Küng 7e33d03470 drivers: remove tap_esc 
- it's not used anymore
- it would need a refactoring to use mixer_module
 2021-02-25 09:28:37 -05:00
David Sidrane fd0494555c canbootloader:stm32_boarddeinitialize->board_deinitialize 2021-02-24 19:20:15 +01:00
David Sidrane dd736f8540 holybro_can-gps-v1:Ensure yeild is used for FLASH programing 2021-02-23 17:45:25 -05:00
Daniel Agar 11ad41f7cb delete old imu/mpu6000 driver 2021-02-23 15:58:36 -05:00
Daniel Agar cd7713eba2 boards: delete unused variants 2021-02-22 20:08:36 -05:00
Daniel Agar 414f9f81d9
move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
David Sidrane 174f2624df holybro_can-gps-v1:board_id uses as Uavcan HW version 2021-02-17 22:47:35 -05:00
David Sidrane 070db73e91 holybro_can-gps-v1:Use common uavcan board identity 2021-02-17 22:47:35 -05:00
Daniel Agar ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar 44df0fb7a2 Analog Devices ADIS16448 rewrite 
- new IMU driver structure with state machine (no sleeps in bus thread)
 - verify all configured registers and trigger reset on failure
 - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
 - don't use CRC-16 on burst transfers except for verified lots
 2021-02-16 10:29:07 +01:00
Daniel Agar fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar d67a84d941 boards: holybro can-gps-v1 fix bosch bmm150 path 2021-02-06 15:56:11 -05:00
David Sidrane 8167023dfb holybro_can-gps-v1: Reorder Sensor Startup for reliabiltiy 2021-02-05 19:55:16 -05:00
David Sidrane 9e834d26f8 holybro_can-gps-v1:Add Flash Based Parameters 2021-02-05 19:55:16 -05:00
David Sidrane 7b3ce832d6 holybro_can-gps-v1: Add UAVCAN CAN2 Support 2021-02-05 19:55:16 -05:00
David Sidrane fe732930d2 holybro_can-gps-v1:Fix ver HW NAME 2021-02-05 19:55:16 -05:00
David Sidrane caba734d26 PR review AIs 2021-02-05 19:55:16 -05:00
David Sidrane 41c9f085ef holybro_can-gps-v1:Temparary LED support 2021-02-05 19:55:16 -05:00
David Sidrane 0554755ed2 holybro_can-gps-v1:Added Support for holybro can gps 2021-02-05 19:55:16 -05:00
Daniel Agar a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Daniel Agar 318c7e83b3 support up to PWM 14 
- generate PWM_MAIN 1-14
 - generate PWM_AUX 1-8
 - generate PWM_EXTRA 1-8
 - px4io and pwm_out directly read configuration parameters
    - only available and active physical outputs are actually shown for configuration
 - overall saves flash despite adding many new parameters
 2021-01-30 15:55:53 +01:00
Daniel Agar f0d1f1d679 boards: disable BDMA on STM32H7 for now 2021-01-28 21:16:23 +01:00
Daniel Agar 1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar 763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane a2a8d2fcf2 holybro_pix32v5: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 2b69fad3ac holybro_kakutef7: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 79744ec156 holybro_durandal-v1: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
斯东Stone 5f0ecc893e
boards: holybro/durandal add TELEM3 (/dev/ttyS4) 2020-11-29 10:17:18 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 6b9dde59d6 update ecl to latest 
- fmu-v5 debug and stackcheck builds now need to be CONSTRAINED_FLASH to fit
 - delete unused holybro_durandal-v1_stackcheck build (also CONSTRAINED_FLASH)
 2020-10-29 18:56:52 -04:00
David Sidrane 1fa1f8c2c5 durandal-v1:Bootloader init NULL console 2020-10-28 14:25:25 -04:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Beat Küng 274ccaf57c system: include shutdown lock to BOARD_INDICATE_ARMED_STATE 
BOARD_INDICATE_ARMED_STATE was only set during arming, so an external
component might have reset the board during param save, leading to param
loss.

This extends the API to trigger the arming state also while the shutdown
lock is taken.
 2020-10-09 08:23:47 +02:00
Beat Küng 91fa2002e3 kakutef7: fix output ordering 
Regression from d2254c2e44, I overlooked that they were defined in
reverse order.
 2020-10-03 10:45:30 -04:00
Tanja Baumann b5ebdb8e41
add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane 15c8a26a21 holybro_pix32v5: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane f77bf7f475 holybro_kakutef7: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 6681b1ac44 holybro_durandal-v1: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 5dc5ef664f holybro_durandal-v1: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane c17a0ebacf holybro_durandal-v1:Add support for DMA on SPI6 2020-09-16 21:32:04 -04:00
David Sidrane f9adf861dc spracing_h7extreme Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane c2419e7f3d holybro_pix32v5: Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane abe9f1a768 holybro_kakutef7 Updates for NuttX 9.1.0- 
holybro_kakutef7: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 59f914427c holybro_durandal-v1 Updates for NuttX 9.1.0- 
holybro_durandal-v1: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0- 
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Beat Küng 787f9c1213 i2c: use board-specific bus numbering for '-X -b <bus>' CLI 
As boards don't have their external buses labeled consistently, it was not
useful to use an abstraction.
 2020-09-03 15:32:35 -04:00
Daniel Agar 7569722821
iSentek IST8310 magnetometer rewrite 
- simple state machine to reset, configure, etc
 - checked register mechanism (sensor will reset itself on configuration error)
 - configured in 16 bit mode (1320 LSB/Gauss instead of 330 LSB/Gauss)
 - adjusted orientation handling in driver to match datasheet as closely as possible
     - in many external compass units the rotation was wrong and very difficult to actual determine how to set correctly
 2020-09-02 13:14:45 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar e16c8fa345
boards: add new Holybro Pix32v5 2020-08-09 11:48:38 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 13e34b32e6 new Bosch BMI088 IMU driver using FIFOs and DRDY 2020-06-11 12:25:13 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Beat Küng 590b65ebfb Revert "kakutef7 spi: disable IMU drdy" 
This reverts commit 2069576a6e.

PR #15004 fixed the problem.
 2020-06-09 09:11:51 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 31fe7af454 selectively increase optimization -Os -> -O2 
- targetted at modules/libraries that benefit without drastically
increasing flash usage
 - ignored on boards with CONSTRAINED_FLASH set
 2020-06-04 20:59:52 -04:00
Beat Küng 2069576a6e kakutef7 spi: disable IMU drdy 
It cause bad transfers on a Kopis 2, though not on a bench KakuteF7 unit.
Not sure if this is a single case.

nsh> icm20689 status
INFO  [SPI_I2C] Running on SPI Bus 4
INFO  [icm20689] FIFO empty interval: 1000 us (1000.000 Hz)
icm20689: transfer: 46375 events, 6790549us elapsed, 146.43us avg, min 54us max 1709us 81.564us rms
icm20689: bad register: 0 events
icm20689: bad transfer: 4284 events
icm20689: FIFO empty: 0 events
icm20689: FIFO overflow: 1 events
icm20689: FIFO reset: 2 events
icm20689: DRDY interval: 375585 events, 124.93us avg, min 99us max 250us 2.322us rms
INFO  [drivers_accelerometer] /dev/accel device instance: 0
INFO  [drivers_accelerometer] calibration scale: 1.02174 0.99918 0.98338
INFO  [drivers_accelerometer] calibration offset: 0.76124 -0.00725 -0.16437
INFO  [drivers_gyroscope] /dev/gyro device instance: 0
INFO  [drivers_gyroscope] calibration offset: -0.08153 0.02432 0.00050
 2020-06-04 20:58:40 -04:00
Daniel Agar 1cce549b2b boards: holybro_durandal-v1_stackcheck don't build all mags 2020-05-07 15:21:15 -04:00
Daniel Agar 04113b4d57 commander: changes when USB connected 
- skip avionics rail voltage check when USB connected
 - skip forced reboot on USB disconnect if circuit breaker set
 - avionics voltage preflight check don't silently fail if system_power unavailble
     - explicitly set supply check circuit breaker (CBRK_SUPPLY_CHK)
 2020-05-06 13:53:54 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Beat Küng c713ce721e KakuteF7: enable SPI DMA for SPI 4 
DMA for SPI 1 left disabled because the SD card does not work when enabling
it.
 2020-04-08 15:31:51 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
Daniel Agar da383064c6 NuttX update with STM32H7 SPI DMA support 
- holybro durdandal enable SPI DMA
 2020-04-06 22:08:45 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
David Sidrane 025799248c holybro_durandal-v1:Ensure SDMMC power seqensing is clean 2020-04-04 09:39:53 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng 54da4997ad refactor bmi088: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Beat Küng 8f3ba81c4a refactor atxxxx: use driver base class 
and increase update rate to 20Hz
 2020-03-17 23:31:17 -04:00
Beat Küng aeadf54a74 refactor bmp280: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 969a77f889 refactor mpu6000: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng be0a205438 refactor ist8310: use driver base class 2020-03-17 23:31:17 -04:00
Daniel Agar f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar 46a09b711f boards: increase STDIO buffer size where we can afford it 2020-03-11 17:19:44 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
Daniel Agar 4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output 
These are not required, and to be consistent we enforce disabling them now.
 2020-02-13 03:49:16 -08:00
Beat Küng d2254c2e44 holybro/kakutef7: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 5319a98fec durandal-v1: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes 
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
 2020-02-13 03:49:16 -08:00
Beat Küng b399698306 ist8310: remove calibration code 
- it does nothing useful
- increases boot time by 2 seconds on pixhawk 4 due to a poll timeout:
IST8310 on I2C bus 3 at 0x0e (bus: 100 KHz, max: 400 KHz)
WARN  [ist8310] ERROR: TIMEOUT 2
 2020-02-06 12:39:39 -05:00
Daniel Agar dc05ceaad2
create temperature_compensation module 
- this is a new module for temperature compensation that consolidates the functionality previously handled in the sensors module (calculating runtime thermal corrections) and the events module (online thermal calibration)
 - by collecting this functionality into a single module we can optionally disable it on systems where it's not used and save some flash (if disabled at build time) or memory (disabled at run time)
 2020-01-20 21:42:42 -05:00
Daniel Agar 7166b867e1
NuttX stackcheck exclude PX4 Matrix and Param 
- instrumenting PX4 Matrix and Param methods is too burdensome
 - partially restore px4_fmu-v5_stackcheck and holybro_durandal-v1_stackcheck to match default configs
 2020-01-06 18:15:55 -05:00
David Sidrane 2a848c365c holybro_durandal-v1:GPIO_VDD_5V_{HIPOWER|PERIPH}_OC remove Pull up - OC have series 47K 2019-12-18 12:21:33 -08:00
Beat Küng 46a7b27127 kakutef7: fix baro startup 
The bmp280 is on the expansion bus (that is both internal & external)
 2019-12-17 09:57:32 -08:00
Daniel Agar 77cf081925 holybro_durandal-v1 don't manually start pmw3901 2019-12-11 21:08:22 -05:00
Daniel Agar f9e8f615e3 holybro_kakutef7 sync INTERRUPTSTACK, HPWORKSTACKSIZE, and LPWORKSTACKSIZE with v5x 2019-12-09 18:45:27 -05:00
Matthias Grob 904ab16558 Fix trailing whitespace, EOF newline, indentation 2019-12-09 13:22:19 +01:00
Beat Küng 0f42ecc5c7 durandal-v1: enable dshot 2019-11-29 07:39:08 +01:00
Daniel Agar bc182e94e6
sensors split rc_update into new standalone module 2019-11-24 13:25:11 -05:00
Daniel Agar d74cc5ba8c holybro_durandal-v1_stackcheck limit to primary IMU only 2019-11-23 17:23:30 -05:00
Daniel Agar 92559f7a85
Bosch bmp280 barometer cleanup 2019-11-23 15:31:22 -05:00
David Sidrane bbd37ada41 holybro_durandal-v1: update cdcacm product id 2019-11-22 09:39:15 -05:00
David Sidrane 7ca8a8dbaa durandal-v1:Bootloader 
Change PID to 0x4b:
     Holybro obtained their own PID and VID but APM did not follow
     the PX4 convention of makeing the board_id (0x8b) match the PID)

   Incorporated the Upstream Bootloader state sequencing checking change.

   Change the usb cout to send all chars in 1 write.
 2019-11-22 14:32:56 +01:00
Daniel Agar 5aaf1b100b delete unused md25 driver 2019-11-21 18:56:24 -05:00
Daniel Agar 8c38176d77 boards: alphabetize and sync common drivers and modules 2019-11-21 18:56:24 -05:00
Julien Lecoeur a46581987c Update matrix submodule and add pseudoinverse tests (tests matrix) 2019-11-21 13:06:59 -05:00
Daniel Agar 84fe64b1c2
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control 2019-11-19 17:03:11 -05:00
Daniel Agar b5e7e4bc17 add holybro_durandal_stackcheck build and run on Jenkins 2019-11-16 11:43:42 +01:00
Daniel Agar a694f0bbdd bl_update: build and include board bootloader if config available 2019-11-16 11:43:42 +01:00
Daniel Agar 2bb7a1f3c7 holybro_durandal-v1 delete extra defconfig copy 2019-11-16 11:43:42 +01:00
Daniel Agar 2af262ed1d NuttX cmake build wrapper thorough dependencies 2019-11-16 11:43:42 +01:00
Daniel Agar 99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00
David Sidrane a8e7ddd44e durandal-v1:Use Holybro USB PID 2019-11-16 11:43:42 +01:00
David Sidrane b2f28c977d durandal-v1 Nuttx Based PX4 bootloader 
durandal bootloader:Run at 480 Mhz

durandal-v1:bootloader use VBUS detection

Add Durandal bootloader to build
 2019-11-16 11:43:42 +01:00
David Sidrane 4836fc0719 Added board support for holybro_durandal-v1 
Durandal:Fix PLL settings

durandal-v1:Move I2C123, I2C4 to HSI.

   Not liking using HSI but, F7 has, and in reality there is no
  requerment for accuracy.

durandal-v1:board config set 400kHz on card probe

durandal-v1:Board SDMMC Clock Not greater then 25 mHz

durandal-v1:Fix PLL3 configuration typo and value

CI build config for holybro_durandal-v1

durandal-v1:Kconfig - add knob to ensure ARCH_MATH_H is kept

   Upstream changes added ARCH_HAVE_MATH_H to protect from archs
   without math.h from causing isses for users setting
   CONFIG_ARCH_MATH_H and getting errors. PX4 provides a math.h
   and we need CONFIG_ARCH_MATH_H set. So this Selects
   ARCH_HAVE_MATH_H perserving CONFIG_ARCH_MATH_H a defconfig

Track master LED removal

durandal-v1: bmi055 -> bmi088

bmi088 is what the board uses

durandal-v1:add PX4IO support

durandal-v1 rc.board_sensors: start baro

durandal-v1: remove segway module

durandal:Run at 480 Mhz

durandal-v1: build thermal control module

durandal-v1: enable IMU thermal control by default

durandal-v1:Track upstream adc start moved to rc.board_sensors

durandal-v1:Track upstream mavlink start moved to rc.board_mavlink
 2019-11-16 11:43:42 +01:00
David Sidrane ca45b1ee12 holybro:kakutef7 BSP Updated to NuttX 8.1+ 2019-11-16 11:43:42 +01:00
David Sidrane 4ebc00b22e kakutef7:Remove Duplicate goio header 2019-11-16 11:43:42 +01:00
Daniel Agar 668984b6b0 boards: start adc in rc.board_sensors 2019-11-11 17:08:24 -05:00
Daniel Agar 40850f58ee boards cleanup old nsh_archinitialize 2019-11-03 12:09:48 -05:00
Beat Küng 3b7c1b4ff1 src/drivers/boards: move to platforms/nuttx/src/px4/common 2019-10-30 11:48:47 +01:00
Beat Küng b30171ba8d board_common.h: move under platforms/common 
Also move board_determine_hw_info and board_gpio_init under platforms/nuttx
 2019-10-30 11:48:47 +01:00
Beat Küng 3198610f85 src/platforms: move all headers to platforms/common/include/px4_platform_common 
and remove the px4_ prefix, except for px4_config.h.

command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done

Transitional headers for submodules are added (px4_{defines,log,time}.h)
 2019-10-30 11:48:47 +01:00
Daniel Agar e2cf501f9d
boards: increase CONFIG_MAX_TASKS 32->64 on all F7s (#13285) 
On more complicated setups it's still possible to exceed 32 tasks. For example fmu-v5 with mavlink on every telem (+ USB), external spi usage (pmw3901), gimbal (vmount), multiple i2c sensors, and camera feedback is 35 tasks (with top running). This is a fairly extreme case, so I'm only going to increase CONFIG_MAX_TASKS on newer F7 boards.
 2019-10-27 12:37:01 -04:00
Igor Mišić f4ee9141cb DShot: updated driver to use NuttX DMA functions (#13233) 2019-10-25 09:49:03 +02:00
Daniel Agar 6a0f5249f8
sensors: split out analog battery handling to new standalone battery_status module 2019-10-21 13:40:23 -04:00
Beat Küng b080679146 kakutef7, kopis airframe: enable dshot & telemetry 2019-10-11 08:14:17 +02:00
Beat Küng 182efaa757 dshot: reduce static buffer size 
And handle failures of up_dshot_init().

On Omnibus: reduces memory usage if dshot is enabled by ~1.0KB.
The buffer is roughly 1KB in size.
 2019-10-11 08:14:17 +02:00
Beat Küng 775916ef11 kakutef7: enable dshot 2019-10-11 08:14:17 +02:00
Daniel Agar 315141873e NuttX boards reduce CONFIG_MAX_TASKS 64 -> 32 (default) 2019-10-02 19:44:46 -04:00
Daniel Agar 26364d44c9
px4_work_queue: command line status output and shutdown empty queues 
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
 * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
 2019-10-02 12:23:17 -04:00
garfieldG bbb96cbd0c Mavlink startup script per board 
-moved rc.mavlink to the boards optional rc additions (now it's called rc.board_mavlink) to handle board specific mavlink needs (mavlink over usb, ethernet, additional streams, etc.)
-mavlink module will be responsible to usb defaults, therefore less args are needed to be passed to mavlink module if one wants to use mavlink over usb.
-the way to check if connection is usb is by it's designated variable and not by config mode.
 2019-09-29 10:46:08 -04:00
Beat Küng f3fccf53f6 src/drivers/{kinetis,stm32}: move to arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng 1cb6c36a00 adc: refactor into arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng ab43a83bed platform: restructure (NuttX) architecture-specific code 
updated: tone_alarm, px4io_serial, px4_micro_hal
 2019-08-30 07:59:44 +02:00
Daniel Agar 0955fd2d58
NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20 2019-08-07 21:23:27 -04:00
Beat Küng 4f090980ab kakutef7 board_config: remove usb valid defines 
Otherwise 'system_power' gets published with voltage5v_v = 0, as there is
no 5V sensing pin, leading to Avionics Power Low preflight check failures.
 2019-07-25 10:38:57 -04:00
Beat Küng 6e833ed7a8 boards: add Holybro KakuteF7 2019-07-16 08:09:22 +02:00