Andrew Tridgell
|
3c3389a005
|
HAL_ChibiOS: raise I2C bus priority on F412
needed for good scheduling with I2C IMU
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
20a008c80a
|
HAL_ChibiOS: disable trace buffers
these were unusued but still allocated
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
6faace278a
|
HAL_ChibiOS: run i2c at 400kHz on F412
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
9f53ae1ea4
|
HAL_ChibiOS: added F412-rev1 hwdef.dat
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
73418519eb
|
HAL_ChibiOS: enable analog debug on F412
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
fd824e6258
|
HAL_ChibiOS: enable toy mode on F412
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
d208dc69d3
|
Tools: moved make_abin.sh into ChibiOS scripts
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
4aa604a193
|
HAL_ChibiOS: enable pixartflow on skyviper-V2450
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
591e0c2249
|
HAL_ChibiOS: allow control of interrupt port
F412 has radio IRQ on port B
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
3cacb1d4b5
|
HAL_ChibiOS: commented the motor order in hwdef
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
f3f6972fc0
|
HAL_ChibiOS: output panics on system console
|
2018-02-08 17:36:33 +11:00 |
Andrew Tridgell
|
75226ba187
|
HAL_ChibiOS: enable logging on MindPX-v2
not working yet, seems to be a problem with SDIO interface
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
4548fd4d2f
|
HAL_ChibiOS: changed RCIN to PULLDOWN
this fixes a high cpu load with no receiver connected
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
86189393a7
|
HAL_ChibiOS: fixed build warnings
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
4886ffbf8a
|
HAL_ChibiOS: fixed build warnings
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
30e4323c6d
|
HAL_ChibiOS: disable USART1 till USB problem solved
using USART1 causes USB disconnects. The behaviour is like CTS/RTS is
enabled on USART1, but it is disabled.
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
ad5a04fc89
|
HAL_ChibiOS: added NODMA option
this allows a peripheral to be configured without DMA (for low-use
UARTs)
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
74f4d5a3c9
|
HAL_ChibiOS: push MPU6500 to 4MHz on mindpx-v2
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
fa68210210
|
HAL_ChibiOS: fixed build with older compilers
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
626632989e
|
HAL_ChibiOS: fixed build for boards with no USB
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
5fc12f82fb
|
HAL_ChibiOS: expanded interrupt stack to 256
this is very conservative, and may be trimmed later based on analysis
of stack usage
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
aae1cc22f4
|
HAL_ChibiOS: updated USB device strings
use defaults or add in serial number
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
4b8bde746e
|
HAL_ChibiOS: improved default USB strings
use board name and serial number to make IDs unique
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
1aa6a0068a
|
HAL_ChibiOS: fixed order of I2C DMA
this was harmless, but confusing for debugging
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
111e5b6268
|
HAL_ChibiOS: change USB ID for revo-mini
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
bc49c0d2c5
|
HAL_ChibiOS: make hwdef.h the same on python2 and python3
and output to /tmp by default to prevent accidental use of old hwdef.h
in the build
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
077aa24c6d
|
HAL_ChibiOS: add more pins for revo-mini port
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
e91144cc8e
|
HAL_ChibiOS: allow for empty UART drivers
allows for boards with no default GPS port
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
e0212ebe85
|
HAL_ChibiOS: cope with ETR timer channels
trean the ETR capability as a separate AF
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
c1df2a8a4b
|
HAL_ChibiOS: cope with timers 10 and later
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
19e1349d0a
|
HAL_ChibiOS: setup serial5 for fmuv3 ESP8266
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
560948dc69
|
HAL_ChibiOS: fixed GPIOs for ESP8266 port
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
fa96e23552
|
HAL_ChibiOS: setup correct volt and current pins
use hwdef.dat to specify battery pins
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
29add8a880
|
HAL_ChibiOS: fixed build without FATFS enabled
|
2018-02-07 20:33:45 +11:00 |
Siddharth Purohit
|
77f8acd7a1
|
HAL_ChibiOS: add CAN to supported peripherals list
|
2018-02-07 20:33:45 +11:00 |
Siddharth Purohit
|
6f21c1583f
|
HAL_ChibiOS: add definitions to support uavcan in fmuv3
|
2018-02-07 20:33:45 +11:00 |
Siddharth Purohit
|
143686f70d
|
HAL_ChibiOS: add placeholder cstdio header
|
2018-02-07 20:33:45 +11:00 |
Siddharth Purohit
|
539d5adc13
|
hwdef: add more posix methods
|
2018-02-07 20:33:45 +11:00 |
Siddharth Purohit
|
288f6b1fa0
|
HAL_ChibiOS: add chibios cpp wrapers, libuavcan's stm32 driver uses it
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
b0d0ee1f01
|
HAL_ChibiOS: reformat using yapf and support python3
allow hwdef.h compilation using python3
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
67e0ba22fe
|
HAL_ChibiOS: fixed some errors in F405 tables
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
890d322b47
|
HAL_ChibiOS: starting on mini-pix hwdef.dat
for RadioLink mini-pix board
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
713006bb1d
|
HAL_ChibiOS: allow more OTG defines to be overridden
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
1fb257a35a
|
HAL_ChibiOS: initial hwdef.dat for revo mini
|
2018-02-07 20:33:45 +11:00 |
proficnc
|
c613c0bde2
|
added the cube red hardware definition
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
a5bafb399f
|
HAL_ChibiOS: adjust SPI pin speeds
|
2018-02-07 20:33:45 +11:00 |
Andrew Tridgell
|
7b251c9739
|
HAL_ChibiOS: lower FRAM CS speed to 2MHz
this matches old firmware
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
30fd2da108
|
HAL_ChibiOS: enable RTSCTS and SBUS_OUT
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
88f11f5a50
|
HAL_ChibiOS: added HAL_I2C_BUS_BASE
this allows fmuv4 to start at bus 1
|
2018-01-20 17:40:07 +11:00 |
bugobliterator
|
c60c0b8ab1
|
HAL_ChibiOS: fix undef line processing
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
613d7a47ba
|
HAL_ChibiOS: support RCIN on mindpx-v2
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
f50f427a59
|
HAL_ChibiOS: added comment on beta fmuv4 board
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
743806116d
|
HAL_ChibiOS: removed unusued ppm driver
now uses AP_RCProtocol
|
2018-01-20 17:40:07 +11:00 |
bugobliterator
|
1db1ff799e
|
HAL_ChibiOS: modify hwdef scripts to setup for generic RCIN
|
2018-01-20 17:40:07 +11:00 |
bugobliterator
|
1970d8a2c8
|
HAL_ChibiOS: use common RCIN pin for fmuv4
|
2018-01-20 17:40:07 +11:00 |
bugobliterator
|
445ba6ed39
|
HAL_ChibiOS: update ppm to use Extended ICU driver
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
25f13ed518
|
HAL_Chibios: adjust MPU9250 clock speed down
this helps with fast sampling enabled
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
7e44b06440
|
HAL_ChibiOS: adjust SPI clock rates on FMUv4
this prevents some timing errors on the IMUs
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
dd59a5ff57
|
HAL_ChibiOS: adjust external bus clock for mpu9250
this fixes an issue with fast sampling on the PH2.1 cube
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
c863681849
|
HAL_ChibiOS: fixed PWM output assignment
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
82c6d2751f
|
HAL_ChibiOS: fixed F412 ram and flash setup
|
2018-01-20 17:40:07 +11:00 |
Peter Barker
|
67bed1d6c2
|
HAL_ChibiOS: added support for Sparky2 STM23F405 board
|
2018-01-20 17:40:07 +11:00 |
Andrew Tridgell
|
f6138e3c91
|
HAL_ChibiOS: use calloc in preferance to malloc
|
2018-01-17 11:22:05 +11:00 |
Andrew Tridgell
|
7ca3b56886
|
HAL_ChibiOS: fixed STM32F405 typos
|
2018-01-16 09:46:30 +11:00 |
Andrew Tridgell
|
e120e912f1
|
HAL_ChibiOS: moved board defines to hwdef.dat
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
e2a65c8c60
|
HAL_ChibiOS: added support for AP_Terrain for ChibiOS
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
cde930f5c8
|
HAL_ChibiOS: added skyviper-v2450 hwdef config
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
c8beddf1e4
|
HAL_ChibiOS: allow for includes in hwdef.dat files
this allows creation of derived boards
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
2929b3dbb1
|
HAL_ChibiOS: allow builds on systems with no SDIO
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
7b0eccc309
|
HAL_ChibiOS: updated skyviper-f412 hwdef.dat
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
60a773d045
|
HAL_ChibiOS: removed duplicate defines
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
ef1a14cc6c
|
HAL_ChibiOS: fixed 5V analog scale on fmuv4 and mindpx-v2
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
867e7ebf71
|
HAL_ChibiOS: auto-generate GPIO table from hwdef.dat
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
fbe8166c71
|
HAL_ChibiOS: auto-generate AnalogIn pin table
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
f14a847b97
|
HAL_ChibiOS: rename classes to remove 'Chibi'
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
25b68dc150
|
HAL_ChibiOS: switch base freq when needed
timers can't do below 123 Hz with a clock of 8MHz, so we need to
change clock frequency based on the target period
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
738d70ef02
|
HAL_ChibOS: fixed handling of disabled channels
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
2978649cd4
|
waf: moved to generated loader script
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
6e4ef32628
|
HAL_ChibiOS: moved to generated loader script
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
9482ab1840
|
waf: use common makefile for ChibiOS if no custom present
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
bae9469af7
|
HAL_ChibiOS: use a common makefile and board.c
allow for custom files per board if supplied, but don't require them
for every board
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
c639708e22
|
HAL_ChibOS: auto-generate full PWM config
use PWM markers in hwdef.dat to mark each PWM channel
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
daa9eec836
|
HAL_ChibiOS: auto-configure timer channels
allow for one marked PPMIN for input
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
d65ec2ada7
|
HAL_ChibiOS: moved more headers to common
allow customisation, but don't require every port to copy the defaults
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
960bc40ff3
|
HAL_ChibiOS: moved to a common mcuconf.h
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
48d2704cf4
|
HAL_ChibiOS: CS pins don't need to be a single SPI BUS
its possible to use a CS pin on different buses, so they should not
have a particular bus tag
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
a554215576
|
HAL_ChibiOS: start to cope with not having I2C, SPI and UARTs
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
468cadca45
|
HAL_ChibiOS: auto-generate UART driver declarations
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
58796ff435
|
HAL_Chibios: moved SPI device tables to hwdef.dat
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
d1f93cd66c
|
HAL_Chibios: auto-generate I2C, SPI and UART device lists
this is less error prone and make a port faster as more information is
in hwdef.dat
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
280140bf25
|
HAL_ChibiOS: added support for MindPX-v2
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
9f5e01d20a
|
HAL_Chibios: fixed FMUv4 compasses
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
2646b9ef33
|
HAL_Chibios: matched debug port speed to NuttX
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
41be81af34
|
HAL_Chibios: added hardware flow control for UARTs
implement RTS in software and CTS in hardware
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
9916a93919
|
HAL_ChibiOS: fixed I2C device list
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
f135e73e04
|
HAL_ChibiOS: F412 doesn't have CCM ram
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
c3435e45c5
|
HAL_ChibiOS: initial port to FMUv4
|
2018-01-15 11:46:02 +11:00 |
bugobliterator
|
5feef04f5f
|
HAL_ChibiOS: add support for CCM memory
this uses DMA bounce buffers for bus transfers, and falls back to CCM
ram in allocations if the type is unspecified
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
4b5e617673
|
HAL_ChibiOS: added missing DMA table for STM32F405
|
2018-01-15 11:46:02 +11:00 |
Peter Barker
|
f3d46506b0
|
AP_HAL_Chibios: warning fixes
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
aa2175ec0c
|
HAL_ChibiOS: show ADC1 channels in hwdef.h
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
5a7e2f75d1
|
HAL_ChibiOS: added ADC1_Map to STM32 tables
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
86fbdcd060
|
HAL_ChibiOS: ensure malloc returns zeroed memory
|
2018-01-15 11:46:02 +11:00 |
Andrew Tridgell
|
8b6bab7b17
|
HAL_Chibios: added ChibiOS HAL
this is based on initial work by Sid, reset here for easier merging
|
2018-01-15 11:46:02 +11:00 |