Commit Graph

1158 Commits

Author SHA1 Message Date
Andrew Tridgell 1f06aa069e HAL_ChibiOS: fixed uprintf() in bootloader 2019-10-21 19:12:01 +11:00
Andrew Tridgell e6cb35090c HAL_ChibiOS: fixed page size for STM31F105 flash 2019-10-21 19:12:01 +11:00
Andrew Tridgell 0ef2a60682 HAL_ChibiOS: support ZubaxGNSS as a AP_Periph target 2019-10-21 19:12:01 +11:00
Andrew Tridgell 44f895ab16 HAL_ChibiOS: fixed for ZubaxGNSS build 2019-10-21 19:12:01 +11:00
Andrew Tridgell 8c796ecd2c HAL_ChibiOS: support f103-RangeFinder 2019-10-21 19:12:01 +11:00
Andrew Tridgell 3cd7dd9f12 HAL_ChibiOS: disable GPS and MAG in base f103 build
enable in f103-GPS
2019-10-21 19:12:01 +11:00
Andrew Tridgell 3ca478747c HAL_ChibiOS: enable airspeed in f103-ADSB 2019-10-21 19:12:01 +11:00
Andrew Tridgell fa6b6140e3 HAL_ChibiOS: split out f103-GPS from base f103-periph
this makes it easier to create more peripheral variants
2019-10-21 19:12:01 +11:00
Mirko Denecke b84dcd483d AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces 2019-10-21 08:01:56 +11:00
Andrew Tridgell e90bd27435 HAL_ChibiOS: fixed I2C on F103
we need to use open-drain, and the sign of the constant matters
2019-10-20 20:31:02 +11:00
Andrew Tridgell 6f11926dbd HAL_ChibiOS: enable NCP5623 LED in f103-GPS 2019-10-20 20:31:02 +11:00
Siddharth Purohit 2b410479af HAL_ChibiOS: remove unused code 2019-10-19 09:55:38 +11:00
Andrew Tridgell b9885034b1 HAL_ChibiOS: added a f103-ADSB firmware
for presenting a ping ADSB device as UAVCAN
2019-10-16 13:13:24 +11:00
Andrew Tridgell 85271a8747 HAL_ChibiOS: split out f103-GPS from base f103-periph
this makes it easier to create more peripheral variants
2019-10-16 13:13:24 +11:00
Andrew Tridgell b7ae12a9d3 HAL_ChibiOS: reduce max compasses to 1 on AP_Periph 2019-10-16 08:58:52 +11:00
Andrew Tridgell 97dc76732c HAL_ChibiOS: drop mRoControlZeroF7 DPS310 clock to 5MHz 2019-10-15 10:22:15 +11:00
Henry Wurzburg c515f4b317 AP_HAL_ChibiOS/hwdef: update KakuteF4 readme 2019-10-14 10:04:30 +11:00
Andy Piper 28b866cc8f AP_HAL_ChibiOS: hardware definitions for Kakute F7 Mini 2019-10-12 21:53:55 +11:00
Andrew Tridgell 77bf67e15f HAL_ChibiOS: fixed padding of neopixel bits
lack of padding at start caused occasional glitches in colors
displayed
2019-10-10 10:41:19 +11:00
Andrew Tridgell 15e4641e51 AP_HAL_ChibiOS: cleanup ifdefs for SLCAN enable 2019-10-08 10:02:14 +11:00
Andrew Tridgell 555f56a8af HAL_ChibiOS: removed wait on CAN peripheral in H7
these wait busy loops can take a very long time, and end up causing
interrupts to be lost elsewhere in the system, causing lost bytes on
UARTs

We should not have while loops waiting on peripharals like this. If we
do need to wait for a flag to clear then it needs to be done in a low
priority thread, or we need to check for completion in a timer

CAN still seems to work with this change, but needs flight testing
2019-10-03 15:26:47 +10:00
Andrew Tridgell 47f2f1764d HAL_ChibiOS: generate HAL_MEMORY_TOTAL_KB for each board 2019-10-01 09:29:55 +10:00
Andrew Tridgell e3a965272c HAL_ChibiOS: added Pixhawk1-1M
this is for 1M versions of the Pixhawk1. It is smaller than fmuv2 as
it only links the specific sensors needed for Pixhawk1
2019-10-01 09:08:25 +10:00
Mark Whitehorn d8a07b6c44 HAL_ChibiOS: fix FMU fast_channel_mask
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
2019-10-01 07:13:33 +10:00
Andrew Tridgell 748cf39116 HAL_ChibiOS: disable DMA for RCIN on Pixracer
this frees up DMA for USART1_RX, which gives DMA for input over the
SERIAL5 WiFi port, which is important for applications where a
pixracer is being fed vision data over WiFi
2019-09-30 07:58:40 +10:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2
-O3 does not seem to be a win, and takes up a lot more flash
2019-09-28 08:57:26 +10:00
Peter Barker 9fb715692e AP_HAL_ChibiOS: correct include of mavlink header for analog debug 2019-09-25 12:22:27 +10:00
Andrew Tridgell 386e7dc3e8 HAL_ChibiOS: fixed delay for OneShot125 channels
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
2019-09-22 19:43:35 +10:00
Andrew Tridgell 850892c3d9 HAL_ChibiOS: fixes from LGTM errors 2019-09-22 18:35:15 +10:00
Michael du Breuil 95bca05322 AP_HAL_ChibiOS: Only include MAVLink when using the MAVLink debugging 2019-09-19 10:48:25 +09:00
Andrew Tridgell 3c058851b2 HAL_ChibiOS: fixed undef for define lines
this fixes IMU heater enable for CubeBlack+
2019-09-16 12:53:44 +10:00
Andrew Tridgell 255e769171 HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+ 2019-09-16 12:53:44 +10:00
bugobliterator e82da992c9 HAL_ChibiOS: hwdef: add hwdef for CubeBlack+ 2019-09-16 12:53:44 +10:00
Andrew Tridgell 28cca004f2 HAL_ChibiOS: added default params for skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell 1dca0a16f5 HAL_ChibiOS: rename skyviper-f412 to skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell b33afde884 HAL_ChibiOS: allow safety button on CUAV_GPS to be used for "stay in bootloader"
allows for recovery of bad CAN firmware
2019-09-10 16:22:33 +10:00
Andrew Tridgell c6a9f067e2 HAL_ChibiOS: enable LEDs on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 3dfe15443d HAL_ChibiOS: fixed orientation of CUAV_GPS compass 2019-09-10 16:22:33 +10:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell 0ea67943b9 HAL_ChibiOS: enable safety button on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 186eedf838 HAL_ChibiOS: enable safety LED 2019-09-10 16:22:33 +10:00
Andrew Tridgell 75696997cc HAL_ChibiOS: added buzzer support to CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4
this makes Kopis1 display LEDs properly
2019-09-10 13:03:28 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API
allow for N leds per chain, and setting separate colours per led in
each chain
2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 91e8752c17 HAL_ChibiOS: wrap more libc functions
this saves a few k of flash as it avoids linking libc versions of some
functions
2019-09-09 13:31:30 +10:00
Andrew Tridgell 3166f84954 HAL_ChibiOS: added vsnprintf wrapper
this allows us to use a common snprintf implementation
2019-09-09 13:31:30 +10:00
Andrew Tridgell 83872c23e5 HAL_ChibiOS: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell fd80220d3e HAL_ChibiOS: setup PH4-mini RCIN port by default 2019-09-06 08:51:45 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 06b272705e HAL_ChibiOS: run RCIN thread at 1kHz
this gives fast enough response for SBUS parsing on a UART
2019-09-06 08:51:45 +10:00
Andrew Tridgell c841b39ea2 HAL_ChibiOS: switch to AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell ad2890dc5a HAL_ChibiOS: added connector pinouts for PH4-mini 2019-09-06 08:51:45 +10:00
Andrew Tridgell b344946300 HAL_ChibiOS: prevent duplicate sensors in hwdef.dat
throw an error on configure if there is a duplicate
2019-09-05 06:37:35 +10:00
Andrew Tridgell 2c5c8106a5 HAL_ChibiOS: removed duplicate barometer from fmuv5 2019-09-04 21:24:01 +10:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell c2c8702329 HAL_ChibiOS: convert remaining boards to use COMPASS specifier 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell 316e7cf7e6 HAL_ChibiOS: fixed mini-pix compass and baro probing
removed dup baro and fixed compass probe
2019-09-04 16:27:47 +10:00
Andrew Tridgell beca17c638 HAL_ChibiOS: use GET_I2C_DEVICE() for i2c probing
this allows for the driver probing to use a macro to prevent loading
of duplicate i2c devices (AP_Compass does this)
2019-09-04 16:27:47 +10:00
Michael du Breuil e19f0ef238 AP_HAL_ChibiOS: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
E Thomas c09d6908ed Enabled active buzzer output on OmnibusNanoV6 2019-09-03 09:59:53 +10:00
Andrew Tridgell 72494788f7 HAL_ChibiOS: convert more boards to use BARO specifier 2019-08-28 06:54:11 +10:00
Andrew Tridgell 0667747506 HAL_ChibiOS: convert some more boards to new IMU specifiers 2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ce4ff916e HAL_ChibiOS: fixed Pixhawk1 gyro orientation
this was broken by the recent switch to hwdef.dat for orientations
2019-08-27 19:29:37 +10:00
Andrew Tridgell 0ffe2e75be HAL_ChibiOS: fixed warnings 2019-08-27 15:40:43 +10:00
Andrew Tridgell 9d760a2956 HAL_ChibiOS: disable re-entrancy in FATFS
not needed now we have a semaphore in AP_Filesystem
2019-08-27 15:40:43 +10:00
Andrew Tridgell bf79b65e07 HAL_ChibiOS: simplify stubs code 2019-08-27 15:40:43 +10:00
Andrew Tridgell d1565a96c5 HAL_ChibiOS: wrap cacheBuffer functions
needed to avoid problem with end() method in UARTDriver shadowing with
F7 implementation of cache macros
2019-08-27 15:40:43 +10:00
Andrew Tridgell b867ef35c0 HAL_ChibiOS: use AP_Filesystem API 2019-08-27 15:40:43 +10:00
Andrew Tridgell b30f3697d2 HAL_ChibiOS: fixed build without ISR limit 2019-08-27 10:29:56 +10:00
Andrew Tridgell 97c56c068e HAL_ChibiOS: update board IDs for AP_Periph firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell 63f39c2bd6 HAL_ChibiOS: fixed build of iomcu firmware 2019-08-27 10:29:56 +10:00
Andrew Tridgell 64921b64f5 HAL_ChibiOS: enable sensors in peripheral firmwares 2019-08-27 10:29:56 +10:00
Andrew Tridgell fa76d1fbe6 HAL_ChibiOS: disable watchdog save in bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 5cbe85ee19 HAL_ChibiOS: allow for ADC and clock overrides 2019-08-27 10:29:56 +10:00
Andrew Tridgell dc89d10ccf HAL_ChibiOS: added hwdef.dat for CUAV_GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell c8806acaf5 HAL_ChibiOS: use AP_PERIPH env var 2019-08-27 10:29:56 +10:00
Andrew Tridgell cbc83d68cd HAL_ChibiOS: allow for CAN enable override on F4 2019-08-27 10:29:56 +10:00
Andrew Tridgell fb68fa8bc9 HAL_ChibiOS: fixed typo for 512k F4 parts 2019-08-27 10:29:56 +10:00
Andrew Tridgell e51a1a88df HAL_ChibiOS: initial hwdef-bl.dat for CUAV CAN GPS 2019-08-27 10:29:56 +10:00
Andrew Tridgell 66ab585a24 HAL_ChibiOS: setup defaults for CAN app versions 2019-08-27 10:29:56 +10:00
Andrew Tridgell d711bed405 HAL_ChibiOS: set default node ID of 117
this allows for flight controllers without DNA support
2019-08-27 10:29:56 +10:00
Andrew Tridgell ababe1e81d HAL_ChibiOS: disable UART support in f103-periph bootloader 2019-08-27 10:29:56 +10:00
Andrew Tridgell 2facfe0baa HAL_ChibiOS: support empty UART_ORDER
for CAN bootloader without uart support
2019-08-27 10:29:56 +10:00
Andrew Tridgell 9a7b52fd15 HAL_ChibiOS: added hwdef.dat for f103-periph 2019-08-27 10:29:56 +10:00
Andrew Tridgell 16bdaaa1af HAL_ChibiOS: added support for STM31F10x for AP_Periph 2019-08-27 10:29:56 +10:00
Stone white ec911710c9 hwdef: Enable Spektrum 3.3V VDD Power on fmuv5 2019-08-26 17:27:02 +10:00
Michael du Breuil 56e35e0712 AP_HAL_ChibiOS: Remove almost redundant code duplication from the HAL 2019-08-26 17:24:09 +10:00
Andrew Tridgell ffe0f338d3 HAL_ChibiOS: enable utime() API 2019-08-26 15:41:44 +10:00
Henry Wurzburg 00c111651a ChiBios: Omnibusf4pro hwdef tweak to allow active or passive buzzer 2019-08-26 12:22:53 +10:00
Andrew Tridgell aeb58cede1 HAL_ChibiOS: I2C timeout should be send+recv, not MAX(send,recv)
MAX() is right for SPI, not I2C
2019-08-26 09:13:39 +10:00
Andrew Tridgell 578e5dfdaa HAL_ChibiOS: add up i2c ISR count 2019-08-26 09:13:39 +10:00
Andrew Tridgell f8cfbb8062 HAL_ChibiOS: added ISR limit on I2C
this will prevent any possibility of an I2C interrupt storm. This is
designed to address the most likely cause of #11642
2019-08-25 17:12:16 +10:00
Andrew Tridgell 8080efbc6a HAL_ChibiOS: allow for blocking unbuffered uarts
this is used by AP_IOMCU to avoid a race condition where the mutex is
busy on write() causing a zero-length write and delayed output
2019-08-17 17:36:41 +10:00
Andrew Tridgell afc8a70ce4 HAL_ChibiOS: fixed a bug in wait_timeout() on UARTs
wait_timeout() could return true on a read of less bytes than are
expected.
2019-08-17 17:36:41 +10:00
Peter Barker 35c2406b17 AP_HAL_ChibiOS: add missing override keywords
This was causing CubeOrange not to build
2019-08-17 13:25:05 +10:00
Peter Barker 54b200a777 AP_HAL_ChibiOS: add missing uavcan-related override keywords 2019-08-14 16:33:29 +10:00
Andrew Tridgell 5e40921b42 HAL_ChibiOS: fixed reboot hold in bootloader
thanks to Tom for noticing this
2019-08-12 22:21:13 -07:00