Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
59,527 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

891 Commits

Author SHA1 Message Date
Peter Barker 515b79a6ca autotest: remove un-needed calls to drain_mav_unparsed 
these calls are generally bad now, given we have context_collect things going on which always want to see messages coming in
 2022-07-20 15:17:25 +10:00
Peter Barker a8357531d1 autotest: pause SITL process while draining mav unparsed 2022-07-20 15:17:25 +10:00
Peter Barker d2caebf39c autotest: increase time allowed for getting statustexts 
frsky is run i9n a thread  - and signficiant speedsup seem to adversely affect it
 2022-07-19 11:00:27 +10:00
Peter Barker 84adb059ed autotest: correct frsky text comparison bug 
reusing the variable "text" here crewed up subsequent receiving of messages as it could reset the text from empty to the most recently received text.
 2022-07-19 11:00:27 +10:00
Peter Barker 271b4d7d3c autotest: disable mavutil autoreconnect in drain_mav 
The process may not be available
 2022-07-19 11:00:27 +10:00
Peter Barker acd9fb9c0a autotest: pause/unpause SITL while draining mav 
If Python can't keep up with the message volume coming from the autopilot we never manage to drain all messages from the vehicle.

So try pausing/unpausing the simulation so we can drain the link...

AT-1968.6: AP: PreArm: Radio failsafe on
AT-1969.9: AP: PreArm: Radio failsafe on
AT-1971.2: AP: PreArm: Radio failsafe on
AT-1972.4: AP: PreArm: Radio failsafe on
AT-1973.7: AP: PreArm: Radio failsafe on
AT-1974.9: AP: PreArm: Radio failsafe on
AT-1975.3: Drained 2000283 messages from mav (7218.974791/s)
AT-1975.3: Exception caught: Traceback (most recent call last):
  File "/mnt/volume_nyc3_01/autotest/APM/APM/Tools/autotest/common.py", line 699
8, in run_one_test_attempt
    self.context_pop()
  File "/mnt/volume_nyc3_01/autotest/APM/APM/Tools/autotest/common.py", line 499
3, in context_pop
    self.set_parameters(dead_parameters_dict, add_to_context=False)
 2022-07-19 11:00:27 +10:00
Peter Barker e38adc7d14 autotest: pause/unpause SITL while draining mav 
If Python can't keep up with the message volume coming from the autopilot we never manage to drain all messages from the vehicle.

So try pausing/unpausing the simulation so we can drain the link...

AT-1968.6: AP: PreArm: Radio failsafe on
AT-1969.9: AP: PreArm: Radio failsafe on
AT-1971.2: AP: PreArm: Radio failsafe on
AT-1972.4: AP: PreArm: Radio failsafe on
AT-1973.7: AP: PreArm: Radio failsafe on
AT-1974.9: AP: PreArm: Radio failsafe on
AT-1975.3: Drained 2000283 messages from mav (7218.974791/s)
AT-1975.3: Exception caught: Traceback (most recent call last):
  File "/mnt/volume_nyc3_01/autotest/APM/APM/Tools/autotest/common.py", line 699
8, in run_one_test_attempt
    self.context_pop()
  File "/mnt/volume_nyc3_01/autotest/APM/APM/Tools/autotest/common.py", line 499
3, in context_pop
    self.set_parameters(dead_parameters_dict, add_to_context=False)
 2022-07-19 11:00:27 +10:00
Peter Barker 28ed2e3cd5 autotest: add support for building alternate binaries 
e.g. adding features ordinarily compiled out
 2022-07-19 09:09:05 +10:00
Peter Barker bceaa10794 autotest: add a test for rally point altitudes 2022-07-14 11:49:53 +10:00
Andrew Tridgell 2f7a8769c0 autotest: added --ubsan and --ubsan-abort to sim_vehicle.py and autotest.py 
allows for undefined behaviour checking in SITL
 2022-07-12 11:00:08 +10:00
Peter Barker 2ca68da77a autotest: correct setting mode by number 2022-07-12 08:51:21 +10:00
Peter Barker 7647e38f3f autotest: create get_home_tuple_from_mission method 
Useful if you want to start a mission where a saved waypoint file's home location is
 2022-07-10 20:59:52 +10:00
Peter Barker 86096261d0 autotest: add new wait_and_maintain_range method 2022-07-07 21:29:43 +10:00
Peter Barker 215842fe82 Tools: add tests for ICE Planes 2022-07-01 19:33:51 +10:00
Peter Barker bc12a61c9a autotest: use slightly faster recv_msg call in drain_mav 
Cuts out some code in pymavlink's recv_match which we don't need here.  We even explicitly don't run the idle hooks which pymavlink supplied when we're running under drain_mav
 2022-06-30 09:46:13 +10:00
Peter Barker 208554d402 autotest: correct diagnostic message 2022-06-29 21:03:42 +10:00
Peter Barker f6816f38dc autotest: add timeout in drain_mav 
At large speedups we can create more telemetry than we can consume.  Detect that and raise an exception, assuming we should be able to drain anything within 2 minutes
 2022-06-29 21:03:42 +10:00
Peter Barker 08ae4f050c autotest: fix race condition in button test 
The subsequent test could end up arming the vehicle based on this left-over state.
 2022-06-16 21:24:31 +10:00
Peter Barker 39a0ecbb4b autotest: check rate is configured after we do the rate check 
This is just to make sure that the autopilot isn't losing the configuration somehow.
 2022-06-16 10:04:08 +10:00
Peter Barker 0697ce19d2 autotest: tidy wait_disarmed 2022-06-15 09:11:51 +10:00
Peter Barker b550949766 autotest: scale SITL RC input according to speedup 
Too slow when running at 100 times speedup
 2022-06-13 21:41:41 +10:00
Peter Barker 171bdd9e5b autotest: better diagnostics for mission transfer 2022-06-12 15:56:53 +10:00
Peter Barker e02d50d0e8 autotest: increase allowed time for mission item download 
Because we're involving round-trip times to the Python and back, we need to allow more time to pass on the autopilot when downloading very large missions.  Add a factor based on speedup
 2022-06-12 15:56:53 +10:00
Peter Barker ad4fc316ec autotest: increase sample period for HIGH_LATENCY2 test 
Should be useful at higher speedups
 2022-06-12 15:56:53 +10:00
Peter Barker bb36cedee3 autotest: correct message hook handling 
Fun with closures, and not removing hooks soon enough when popping contexts.
 2022-06-12 15:56:53 +10:00
Peter Barker b8407a4bec autotest: adjust current wp reset 2022-05-15 21:17:50 +10:00
Andrew Tridgell 151f17d563 autotest: reset mission on takeoff for quadplanes 2022-05-15 21:17:50 +10:00
Peter Barker 287573fff7 autotest: add test for large circle radii in NAV_LOITER_TURNS 2022-05-11 17:40:35 +10:00
Peter Barker b659360d64 autotest: test DO_CHANGE_SPEED mission item for Plane 2022-05-05 10:48:35 +10:00
Peter Barker 43b5f22c1a autotest: add test for avoidance resume-auto-or-loiter action 2022-04-21 06:59:39 +10:00
Peter Barker 1340132f6f autotest: add rangefinder test 2022-04-19 10:26:10 +10:00
Peter Barker c33f6f3a8d autotest: add tests to ensure we get BCN, RPM and PRX/PRXR log msgs 2022-04-13 16:22:19 +10:00
Peter Barker 7c526d52fe autotest: correct streaming-boolean bug for parsing of log structures from code 2022-04-06 21:54:15 +10:00
Peter Barker 55d0cf4b03 autotest: add diagnostics for log parse issues 2022-04-06 21:54:15 +10:00
Peter Barker 9f7ae1ee96 autotest: extract ids and message infos per-file, not on aggregate 
Will allow for better diagnostics when something goes wrong
 2022-04-06 21:54:15 +10:00
Peter Barker 582eed12bf autotest: correct extraction of fields from LogWrite messages 2022-04-05 17:57:40 +10:00
Peter Barker 62fe90caa1 autotest: add more convenience methods for checking received data 2022-04-03 09:35:09 +10:00
Peter Barker 05be2ac8c9 autotest: print mag cal progress messages when testing mag cal 2022-03-26 11:17:14 +11:00
Peter Barker 79098d1d10 autotest: correct diagnostic message symlink->link 2022-03-26 11:16:55 +11:00
Peter Barker 7a62b5429b autotest: add test for landing speed 2022-03-23 21:07:05 +11:00
Joshua Henderson fcb0538fef autotest: common check_mission_items_same loosen z to 1E-3 2022-03-16 18:41:52 +11:00
Andrew Tridgell 6fcf85edb8 autotest: more changes for plane disarm disallow 2022-03-09 17:13:45 +11:00
m 37abfb98dc autotest: Copter Pause/Continue in AUTO and GUIDED modes with SCurves 2022-03-08 13:12:36 +09:00
Peter Barker f2fe55b5da autotest: correct exception handling for Python 3.10 2022-03-07 19:36:05 +11:00
Peter Barker 3fa12152f6 autotest: add tests for high latency control protocol 2022-03-05 11:08:30 +11:00
Peter Barker 850227ffdb autotest: add test for THR_FAILSAFE==2 and throttle output 2022-03-01 10:29:37 +11:00
Peter Barker 122d97ece7 autotest: add comment clarifying what an error actually means 2022-02-28 12:47:57 +11:00
Peter Barker 7bb13e934d autotest: add support for multi-line log formats 2022-02-28 12:47:57 +11:00
Peter Barker e6c1bc2402 autotest: fix MAVFTP test 2022-02-26 10:11:19 +11:00
Peter Barker 69e0e544d1 autotest: loosen constraints on AccelCal test 2022-02-23 18:50:28 +11:00
Peter Barker 50c7576506 autotest: add log download tests for dataflash-over-mavlink 
You can't download logs - but we should make sure that the codepaths are
at least crossed
 2022-02-20 15:39:24 +11:00
Peter Barker 376d7ade50 autotest: use assert_receive_message to remove redundant code 2022-02-15 11:06:10 +11:00
Peter Barker fdae5f3ccc autotest: correct wait_groundspeed method 2022-02-14 14:07:47 +11:00
Peter Barker a7d3324759 autotest: increase timeout while under Valgrind 2022-02-09 22:20:31 +11:00
Peter Barker e3631aca91 autotest: print distance remaining while waiting for current wp 2022-02-09 19:27:21 +11:00
Peter Barker c12e0fa3af autotest: reset rather than reboot if required on test fail 2022-02-09 17:01:07 +11:00
Peter Barker a81a1fb19f Tools: build ArduPilot against all.xml not ardupilotmega.xml 2022-02-08 11:00:41 +11:00
Willian Galvani 6e91ae554a Tools: use relative paths for parameter files 2022-02-01 17:35:26 +11:00
VMsunghwan 5d29d945e0 autotest : Update receive 
recieve -> receive
 2022-01-24 18:34:21 +11:00
VMsunghwan 105fc36da5 autotest : correct in typos line 8549 Receving -> Receiving 2022-01-15 13:11:58 +11:00
Peter Barker 427c08db26 autotest: add methods for asserting received mavlink data 2022-01-04 14:37:18 +11:00
Shiv Tyagi 442e783214 Tools: fix DataFlashSITL autotest 
Co-Authored-By: Peter Barker <7077857+peterbarker@users.noreply.github.com>
 2021-12-25 09:14:31 +11:00
Peter Barker c9cc97edbd autotest: augment estop test with post-reboot component 2021-12-17 09:58:37 +11:00
Peter Barker 474c42f9d3 autotest: move assert_prearm_failure up 2021-12-17 09:58:37 +11:00
Peter Barker 8e3265d1f6 autotest: add a test for dataflash log message rates 2021-12-07 09:39:51 +11:00
Andrew Tridgell 9ee140cbbf Tools: revert compass parameter changes 2021-12-04 16:51:53 +11:00
Peter Barker 66395ce195 autotest: add tests for AVD_F_ALT_MIN 2021-12-04 11:35:13 +11:00
Shiv Tyagi 181eff46ac Tools: fix autotest for devo telemetry 
We should pass(skip) the autotest when devo telemetry is compiled out
 2021-12-01 19:16:44 +11:00
Iampete1 f52fb3148b Tools: autotest: common and arducopter: use new compass params 2021-11-30 08:14:43 +09:00
Peter Barker 746d9fda8d autotest: add --callgrind option 2021-11-29 20:46:02 +11:00
Peter Barker ad4b934b3c autotest: correct MAVFTP test for autotest server 
The autotest server runs autotest.py from a directory one-up from the
ArduPilot root directory, whereas most people run it from the root
directory.  The test wasn't taking that into account, looking for a
directory which doesn't necessarily exist.

Changed to os.listdir() to find a directory to look for in the MAVFTP
output.
 2021-11-29 20:44:47 +11:00
Peter Barker b4b267be67 autotest: clarify parameter download test output 2021-11-29 15:10:10 +11:00
Peter Barker 0c0c70d50e autotest: wait a long time for GPS health in HIGH_LATENCY2 
We're assuming this is healthy before running the tests.  Most of the time it was, but running under Valgrind it wasn't
 2021-11-29 15:10:10 +11:00
Peter Barker 48c6239851 autotest: correct resetting of commandline under Valgrind 2021-11-29 15:10:10 +11:00
Peter Barker 09f06be17e autotest: add an autotest for DO_PAUSE_CONTINUE 2021-11-25 08:18:27 +09:00
Peter Barker a7aa74ab20 autotest: add rangefinder convenience functions, fix wait_alt handling 
autotest: add test for rangefinders outside their maxalt
 2021-11-23 18:20:58 +11:00
Peter Barker 5025056f4e autotest: fix MSP_DJI test for Py2 2021-11-20 09:37:02 +11:00
Peter Barker b42432ea3e autotest: add trivial test for MSP 2021-11-17 12:06:07 +11:00
Shiv Tyagi 5811a62bc6 Tools: add autotest for DEVO telemetry 
This adds an autotest to test if we receive data with devo telemetry correctly.
 2021-11-16 11:37:10 +11:00
Peter Barker 75b9a3ff77 autotest: add test for PerfInfo tasks.txt info 2021-11-14 20:43:30 +11:00
Peter Barker 756e45cda2 autotest: add get_stacktrace method 2021-11-11 10:06:47 +11:00
Peter Barker 69d86e6896 autotest: turn draining_mav off when doing early-exit for being quiet 2021-11-11 07:23:09 +11:00
Peter Barker 2dd392ec4b autotest: read pexpects while waiting for sim time 
If we do not drain pexpects regularly the ardupilot process can become blocked on terminal IO
 2021-11-07 09:59:12 +11:00
Peter Barker bb973ac913 autotest: print content of sitl /proc/PID/status on death 
Mysterious death ofi Copter in CI - add more debug
 2021-11-06 17:22:52 +11:00
Peter Barker f86b2c1051 autotest: add sanity check that sim time is updating 2021-11-06 17:22:52 +11:00
Peter Barker 99126d3cc7 autotest: add autotest for getting yaw from moving-baseline GPS setup 2021-10-21 08:34:36 +11:00
Peter Barker 2f90abd7ea autotest: raise an exception in the case we don't load a parameters file 2021-10-21 08:34:36 +11:00
Peter Barker 0e6b0cbf35 autotest: add trivial test for MegaSquirt EFI system 2021-10-17 10:00:08 +11:00
Josh Henderson f67a4ec025 Tools: High_Latency2 Test Fix Location Distance Test 2021-10-13 19:40:45 +11:00
Josh Henderson 941cd6ebc2 Tools: arduplane.py add HIGH_LATENCY2 tests and Check Air_Temperature 2021-10-13 19:40:45 +11:00
Peter Barker 5125874681 autotest: add some tests for running multiple GPSs 2021-10-13 18:02:16 +11:00
Peter Barker 265616b582 autotest: tidy use of dump_message_verbose 2021-10-13 18:02:16 +11:00
Peter Barker 7446a28c45 autotest: augment simulated GPS tests 2021-10-13 18:02:16 +11:00
Peter Barker abd5daccbb autotest: augment HIGH_LATENCY2 test with location test 2021-10-05 10:20:44 +11:00
Peter Barker d7f037e548 autotest: add test for setting streamrates from files 2021-09-30 10:31:03 +10:00
Peter Barker b52b381673 Tools: remove mtk GPSs 
These are ancient and of very poor quality.
 2021-09-29 17:28:59 +10:00
Peter Barker 89c884e8f1 autotest: add test for HIGH_LATENCY2 2021-09-29 15:51:30 +10:00
Peter Barker dd36908ba4 autotest: include SBP file in those that contain log messages 2021-09-28 10:45:51 +10:00
Peter Barker e906cdf1e4 Tools: move SBP logging structures into AP_GPS 2021-09-28 10:45:51 +10:00
Josh Henderson 27bb200644 Tools: add sitl_32bit board type for sim_vehicle & autotests 2021-09-28 09:15:11 +10:00
Peter Barker bc664d77b7 autotest: add trivial test for MAVFTP using MAVProxy 2021-09-27 11:42:47 +10:00
Peter Barker ba5e94ad9a autotest: add load_generic_mission 2021-09-26 17:35:46 +10:00
Peter Barker 6ae280a5d7 autotest: test GPS input using different simulated GPSs 2021-09-25 20:48:41 +10:00
Iampete1 52a805e978 Tools: autotest: update arming swich option number 2021-09-21 09:36:24 +10:00
Peter Barker 0c84c50d70 autotest: exempt HAL_QUADPLANE_ENABLED line in log metadata gen 2021-09-14 13:55:01 +10:00
Peter Barker d7a5e460cc autotest: add tests for changing WPNAV_SPEED_{UP,DN} 
and slight augment for WPNAV_SPEED
 2021-09-08 21:29:38 +10:00
Peter Barker b9d62e7ff2 autotest: add test for setting multiple messages to same rate 2021-09-02 09:24:11 +10:00
yaapu 17cdb07bd5 Tools:autotest: added test for FRSky PassThrough WIND frame 0x500C 2021-08-25 17:13:16 +10:00
Gone4Dirt fba15f3035 Autotest: Update RPM param. 2021-08-25 09:36:58 +10:00
Peter Barker e263063600 autotest: a gap in the beginning of the SERVO_FTW_MASK is now allowed, test it 
make sure the SERVO_FWT_MASK is valid:
  - it can have bit gaps between active channels, but channels higher than 12 are not allowed (AP_EST_TELEM limitation)
  - Explain that the FETtec ESC IDs inside the FETtec Firmware need to be contiguous and start at 1.
add tests for ESC power outages
add test that safety switch zeroes PWM for FETtec ESC
 2021-08-13 16:22:37 +10:00
Peter Barker 8fc6e98900 autotest: raise exception for arm/disarm failures on switch/rc 
Users were calling these without checking the return values. Make that
a non-issue
 2021-08-13 13:40:28 +10:00
Peter Barker 5e81026e78 autotest: add option to hard-reset after every test 2021-08-13 08:01:20 +10:00
Peter Barker cccec5c21c autotest: add test for FRSkyD battery 2021-08-11 15:17:43 +10:00
Peter Barker abb6521127 Revert "autotest: use SIM_STATE (common.xml) instead of SIMSTATE (ardupilotmega.xml)" 
This reverts commit 540a56adb8.

Polling this message caused issues on reboot - shouldn't be a problem
but is.

Retrying that showed that the Tracker GUIDED test failed reliably due to
a yaw problem.
 2021-08-07 16:18:05 +10:00
Peter Barker 540a56adb8 autotest: use SIM_STATE (common.xml) instead of SIMSTATE (ardupilotmega.xml) 
It is a useful superset
 2021-08-05 18:35:11 +10:00
Peter Barker 27fcb3a100 autotest: fix simstate error message 2021-08-05 18:35:11 +10:00
Peter Barker ca35d01baa autotest: move upload_simple_relhome_mission up 2021-08-05 10:38:03 +10:00
Josh Henderson 162b3b70cf Autotest: use MAV_POS_TARGET_TYPE_MASK, remove POS_TYPE_MASK_FORCE 2021-08-03 12:48:38 +10:00
Andrew Tridgell e6f15ed6c0 autotest: cope with WriteStreaming() in doc tests 2021-08-03 10:23:36 +10:00
Andrew Tridgell a0da76243d autotest: reboot after AHRS_ORIENTATION test 
the EKF can be left very unhappy by this test
 2021-07-31 10:01:14 +10:00
Peter Barker 2ae483cee0 autotest: stop uploading artifacts to autotest server 
github action's CI is good at this
 2021-07-30 11:32:59 +10:00
Peter Barker 7929122f49 autotest: improve AHRS trim test 2021-07-28 17:20:28 +10:00
Peter Barker 909decc5be autotest: move wait_attitude up to common.py 2021-07-28 17:20:28 +10:00
Peter Barker da3ff2c142 autotest: add test for live change of AHRS orientation 2021-07-27 17:28:09 +10:00
Peter Barker 04ddc9de03 autotest: correct order of progress vs action in set-param 2021-07-27 16:51:48 +10:00
Peter Barker e1884bcd6e autotest: run dumpstack/dumpcore on stuck SITL process 2021-07-27 16:51:48 +10:00
Peter Barker eff4bc4cfb autotest: drain pexpects in set_parameters loop 
This loop doesn't self.mav.recv(), so the idle loop isn't called, so the
pexpects aren't drained.  That can cause ArduPilot to block on stderr if
it is trying to print a stacktrace, for example
 2021-07-21 17:05:17 +10:00
Peter Barker 43a4ea734f autotest: add some diagnostics for missing processes 2021-07-21 15:50:50 +10:00
Peter Barker 571ae46b0f Tools: split yaw-vehicle-for-mount-roi test out 2021-07-19 18:16:13 +10:00
Andrew Tridgell 618fa156c7 autotest: added --replay option to autotest 
make for easy creation of EKF replay logs
 2021-07-16 21:13:53 +10:00
Peter Barker 743ed05367 autotest: detect ap-*.core as we do core.* files 2021-07-08 15:46:07 +10:00
Andrew Tridgell 3a7075fc65 autotest: fixed config error loop test 2021-07-08 07:56:51 +10:00
Peter Barker c1a5ca6060 autotest: add test to ensure we get a log if arming is forced 2021-07-04 08:54:54 +10:00
Peter Barker 85f36f957d autotest: add force option to arm_vehicle 2021-07-04 08:54:54 +10:00
Peter Barker 4c173e01ef autotest: increase number of parameter retries 
sets were failing just after we uploaded very large numbers of
parameters.  I'm guessing the parameter queue in ArduPilot is still
full.
 2021-06-24 17:58:31 +10:00
Peter Barker 4bb91d1ec1 autotest: shift where we print which attempt we are doing 2021-06-24 17:58:31 +10:00
Peter Barker b58e7bedaa autotest: correct placement of not-alive-after-test message 
This was misplaced with bad conflict resolution
 2021-06-24 08:34:06 +10:00
Peter Barker d6f619fb1a autotest: emit 'attempt 1/3' when retrying set_parameter 
Also reterm things in terms of attempts rather than retries
 2021-06-24 08:30:03 +10:00
Peter Barker 99c7d3aabc autotest: ensure no stray message listeners after test 2021-06-23 21:55:32 +10:00
Peter Barker 6a8ca9e45b autotest: timeout in wallclock time in config error loop test 
SYSTEM_TIME is not sent in config error loop
 2021-06-23 21:55:32 +10:00
Peter Barker 210818cd6e autotest: let arming failure messages get spit out 2021-06-17 21:01:23 +10:00
Peter Barker cea0d7c971 autotest: move autotest tlog files into buildlogs directory 2021-06-11 22:14:11 +10:00
Peter Barker 14b2af84ab autotest: break out a home_relative_loc_ne for getting a home-rel loc 2021-06-11 16:59:51 +10:00
Peter Barker 96e14d470a autotest: retry SITL connect many times while running under GDB 
Allows for easier debugging under gdb when checking startup code
 2021-06-11 11:15:58 +10:00
Peter Barker 0b517cfc57 autotest: start GDB in tui mode by default 2021-06-10 20:52:48 +10:00
Peter Barker 79de738266 autotest: wait for a few seconds for arm-failure messages to appear 
If prearms never come true then we try to arm the vehicle so it tells us
what is wrong.  Since we no longer push statustexts hard, we have to
wait for the reasons to come out at normal clocked rates.
 2021-06-09 14:13:54 +10:00
Peter Barker 6af6d2fc2a autotest: add a progress message for looking for a message in a log 2021-06-09 14:13:31 +10:00
Peter Barker 6944ef6af1 autotest: fly each working Helicopter frame 2021-06-09 12:15:42 +10:00
yaapu b14dcf1df5 Tools:autotest: updated FRSky SPort test to use new 2 byte data IDs 2021-06-02 17:33:15 +10:00
Peter Barker 8925c2830b autotest: check fence upload/download when creating from locs 2021-06-01 15:54:59 +10:00
Peter Barker 3eb164fb6a autotest: move script helper functions from rover to common 2021-05-14 13:21:36 +10:00
Peter Barker 3d562046da autotest: add accuracy option to guided_achieve_heading 2021-05-14 13:21:36 +10:00
Peter Barker 9965f1a31d autotest: add some helpers for local-position movement 2021-05-12 13:01:50 +10:00
Peter Barker 765889b827 autotest: don't send statustext during exception 
During an exception we don't want to be trying to print these
 2021-05-07 14:21:44 +10:00
Peter Barker f78cf73726 autotest: don't fail completely if ArduPilot process dies 2021-05-07 12:22:11 +10:00
Peter Barker 9a13b5c9b6 autotest: add test for auxfunc triggering via script 2021-05-05 07:13:18 +10:00
Peter Barker 8fdfdebe55 autotest: pass sitl_commandline_customised up the context stack 
We're running tests on the Callisto frame when we shouldn't in Copter as
the information was lost in nested Contexts.

We can only reset the SITL commandline at an actual Test level - if a
defaults file has been used then it is unclear as to what the state of
any parameter is in storage as we move between contexts
 2021-05-01 17:22:36 +10:00
Peter Barker c7c4c17c68 autotest: improve change_mode debug 2021-05-01 13:25:13 +10:00
Peter Barker fc426e01c2 autotest: stop using start_test for things that aren't actually tests 
start_test should only be used for top-level tests, not parts of
top-level tests
 2021-04-28 13:53:46 +10:00
Peter Barker 30e8160aa1 autotest: sort logs before moving 
Makes it easier to find last log in output.

Also removing pointless lamdaing of some functions
 2021-04-21 13:16:24 +10:00
Peter Barker 0ee0228883 autotest: fix flapping fly-home-land-and-disarm 
One of the tests just happened to be within acceptance radius of
waypoint 8 - so when we set that as a waypoint we never saw it actually
be our waypoint so the set_waypoint failed
 2021-04-20 23:04:24 +10:00
Peter Barker 8643322f06 autotest: correct string we expect from MAVProxy 
Was APM: now AP:
 2021-04-20 14:08:12 +10:00
Peter Barker c12d1938c2 autotest: add a test for button change for changing modes 2021-04-19 14:27:45 +10:00
Peter Barker dfa342a79f autotest: correct rc-values-good debug 2021-04-03 08:59:14 +11:00
Peter Barker d2c00f7b26 autotest: ensure RC thread is killed after each run_test 
Every run_test starts a thread.  del is not being called.  So clean it
up in the caller
 2021-04-01 11:00:54 +11:00
Peter Barker ba972b6b46 autotest: fix --map option 2021-03-31 16:30:25 +11:00
Peter Barker e8f96efe72 autotest: wait for stats initialisation before rebooting 
If the RTC time we reset parameters (STAT_RESET) is zero then we reset all parameters.

In SITL we only set that time if we see a GPS due to the AP_RTC RTC_TYPES parameter default bitmask value of 1

So if you reboot SITL fast enough while STAT_RESET is zero you can see that STAT_BOOTCNT does not increase. Easily reproducible in SITL; start with -w and type reboot in several times before SITL sees the GPS come up and you can see STAT_BOOTCNT doesn't increase.

Fix is to ensure STAT_RESET is non-zero before rebooting.
 2021-03-31 13:33:39 +11:00
Peter Barker 240e2d6b28 autotest: correct pexpect handling of supplementary programs 2021-03-24 23:10:27 +11:00
Peter Barker ae7b21843e autotest: remove useless mavproxy set heartbeat directive 
This has never actually worked:

2021-03-24T04:53:03.7594996Z AT-0040.3: Starting MAVProxy
2021-03-24T04:53:03.7595674Z PYTHONPATH: /__w/ardupilot/ardupilot/Tools/mavproxy_modules
2021-03-24T04:53:05.8106006Z Running: "mavproxy.py" "--master" "tcp:127.0.0.1:5762" "--aircraft" "test.ArduCopter" "--sitl=127.0.0.1:5502" "--streamrate=5" "--cmd="set heartbeat 8"" "--target-system=1" "--target-component=1" "--quadcopter" "--default-modules" "misc,terrain,wp,rally,fence,param,arm,mode,rc,cmdlong,output"
2021-03-24T04:53:05.8108569Z ERROR LOADING MAVNATIVE - falling back to python implementation
2021-03-24T04:53:05.8109340Z Connect tcp:127.0.0.1:5762 source_system=255
2021-03-24T04:53:05.8109962Z no script test.ArduCopter/mavinit.scr
2021-03-24T04:53:05.8110739Z Unknown command '"set heartbeat 8"'
 2021-03-24 23:10:06 +11:00
Peter Barker 8bf1ac0347 autotest: fix and tidy the log download test 
We were requesting past the end of the file
 2021-03-24 14:46:48 +11:00
Peter Barker fdbbcaa506 autotest: bump default speedups for several vehicles 
These tests seem to run stabley on my box with essentially no speedup
limit
 2021-03-24 14:46:48 +11:00
Peter Barker 6f2de67ead autotest: augment delay_sim_time debug 2021-03-24 14:46:48 +11:00
Peter Barker d9501766c7 autotest: augment delay_sim_time debug 2021-03-24 08:57:03 +11:00
Peter Barker 073a9e3390 autotest: fix frsky passthrough test 
Mainly through polling much faster, but also allowing for statustexts in
different orders from frsky/statustext
 2021-03-22 18:08:44 +11:00
Peter Barker e567cca230 autotest: drain mav before receiving system_time in get_sim_time 2021-03-19 09:46:45 +11:00
Peter Barker 8901efd69d autotest: start and stop MAVProxy for alttype and surface tracking tests 
autotest doesn't currently supply terrain tiles, so MAVProxy must be
started
 2021-03-19 09:46:45 +11:00
Peter Barker 19e5351631 autotest: start and stop mavproxy for setpoint tests 
These work in terrain frame - but autotest won't satisfy terrain
requests yet
 2021-03-19 09:46:45 +11:00
Peter Barker 462ac255a3 autotest: start MAVProxy only as needed for testing 2021-03-19 09:46:45 +11:00
Peter Barker 4269cf52a2 autotest: split application of default parameters and defaultfile parameters 
ensures all vehicles have LOG_DISARMED
 2021-03-19 09:46:45 +11:00
Peter Barker dbee2e5d71 autotest: ignore type=0 heartbeat packets on SITL start 
Until ArduCopter allocates its motors backend we emit a generic type,
for which there is no mode map in pymavlink.

So don't consider the reboot complete until we see a valid heartbeat.
 2021-03-19 09:46:45 +11:00
yaapu ec15614e11 Tools:autotest: added frsky passthrough autotest for terrain message frame 0x500B 2021-03-18 21:43:48 +11:00
Peter Barker 21c124ab47 autotest: tidy set_parameters 
Remove commented code, add more to the verbose option
 2021-03-18 11:29:45 +11:00
Peter Barker da52e5d08c autotest: set SYSID_MYGCS in tests which need it 
This was still relying on heartbeats coming from MAVProxy.  As speedup
increased those heartbeats may not come fast enough - and they really
should be coming from autotest as that's who's doing the commanding.

autotest: set SYSID_MYGCS in AFS test

autotest: set SYSID_MYGCS before setGCSfailsafe
 2021-03-17 16:02:45 +11:00
Peter Barker f7d8994ce1 autotest: move assert_mission_count up, use it 2021-03-17 00:23:05 +11:00
Peter Barker 0c7f3d20a4 autotest: fix attitude test 
autotest: add a get_messages_frame method

Attempts to get a set of messages as close as reasonable in time.
 2021-03-16 14:19:44 +11:00
Peter Barker 4b3adb806c autotest: add test for tailsitter throttle 2021-03-16 10:41:44 +11:00
yaapu 3bfa07d35a Tools:autotest, frsky passthrough fix for long status text message test 2021-03-13 00:14:27 +11:00
bugobliterator 5074b6d336 autotest: add test case for GPS ordering 
also fix flake8 issues
 2021-03-12 16:32:36 +09:00
bugobliterator 48277b43e4 Tools: add autotest for checking GPS ordering 2021-03-12 16:32:36 +09:00
Peter Barker f78d7c3b25 autotest: add option to not check current wp after set_current_wp 
Sometimes a waypoint is set which we'll never emit as our current
waypoint (e.g. a JUMP)
 2021-03-10 09:12:39 +11:00
Peter Barker 3ddffdab9b autotest: correct wait_current_waypoint timeout behaviour 2021-03-10 09:12:39 +11:00
Peter Barker 425ab1358a autotest: tidy streamrate handling 
Stop setting MAVProxy stream rates; these are neither here-nor-there now as MAVProxy will only modify its own connection's streamrates now

Stop doing the set-streamrate dance to work around MAVProxy's
set_streamrate algorithms.

Remove useless and misleading set of streamrate in Plane test; we reset
streamrates on the reboot immediately following this set.  Considering
the streamrate was never eset this was a good thing.
 2021-03-05 21:34:58 +11:00
James O'Shannessy fa7be629e5 AutoTest: Make fence tests flake8 compliant 2021-03-05 14:52:46 +11:00
James O'Shannessy 01b27bdb61 AutoTest: revert change that breaks quadplane 2021-03-05 14:52:46 +11:00
James O'Shannessy 8545715837 AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence 2021-03-05 14:52:46 +11:00
James O'Shannessy b2346ef6df AutoTest: Adds additional tests to ArduCopter to test autoenable and floor 
Adds tests for:
* Testing auto-enable disabled (when no autoenabling of the fence is required)
* Test auto-enabled always after takeoff (when takeoff complete condition met)
* Test auto-enabled disable floor only (when land sequence begins)
* Test auto- on arm/disarm (when vehicle is armed/disarmed)
* Tests ability to land when fence is breached
 2021-03-05 14:52:46 +11:00
James O'Shannessy a3efc9ad98 AutoTest: Fix MAVlite test allowing plane fence to be enabled 2021-03-05 14:52:46 +11:00
James O'Shannessy 47e76a1807 AutoTest: Move fence enable/disable to common location 2021-03-05 14:52:46 +11:00
Paul Riseborough d52594c576 Tools: Fix set_home autotest 
Don't try to get home until EKF has passed alignment and GPs checks.
Use a more realistic lat/lon offset threshold
 2021-03-05 12:10:01 +11:00
Peter Barker 4aed767fe9 autotest: add test for MAV_CMD_DO_SET_MISSION_CURRENT 2021-03-04 11:59:33 +11:00