Commit Graph

3047 Commits

Author SHA1 Message Date
Peter Barker 6ed0d645a3 Plane: support for units on fields 2017-11-23 10:40:30 +11:00
Guy Tzoler a6c7890c74 Plane: use cork/push wrapper 2017-11-21 14:10:54 +11:00
Michael du Breuil 9720fcb8cc Plane: Only update home when not armed, rather then not soft armed
Plane supports being armed, in takeoff logic and not spinning the motor
until the moment the safety button has been pressed. Unfortunately
because the safety button is required to be pressed for soft arming this
results in the plane updating home position while the user moves the
vehicle or is holding it to throw the vehicle which will can result in
several meters of altitude error from where the user expected home to
be.

Because the normal approach to plane is to have activated the safety
button before arming the aircraft this is not expected to be a behaviour
change for most users, but an improvement for people who use the button
to initiate a takeoff.
2017-11-21 11:45:15 +11:00
Andrew Tridgell f7a735b990 Plane: fixed transitions for tailsitters after auto-takeoff
need to use angle wait
2017-11-19 16:06:02 +11:00
Andrew Tridgell 85573b3ff3 Plane: fixed a division by zero
if min airspeed is zero
2017-11-19 16:04:40 +11:00
Andrew Tridgell e06f160dc9 Plane: disable rudder scaling in tailsitters
this is most often implemented as dual-motor differential thrust, and
we don't want to do surface speed scaling for that.

In the future we'll move this scaling so it can be done on rudders for
3D planes
2017-11-18 10:38:46 +11:00
Peter Barker ee5f550475 Plane: AP_Camera uses GPS singleton 2017-11-16 15:28:37 +00:00
Peter Barker b4294c00f6 Plane: use gps singleton for GCS functions 2017-11-15 13:43:03 +00:00
André Kjellstrup 1d27e21d83 Plane: Option to trig by distance only when in AUTO mode 2017-11-14 00:10:22 +00:00
Andrew Tridgell bf1aa64345 Plane: updated release notes for 3.8.3 2017-11-13 15:06:42 +11:00
Andrew Tridgell 271373e1e8 Plane: added a not on min slew rate for throttle 2017-11-13 10:29:46 +11:00
Michael du Breuil 767018b1d4 Plane: Support unlocking cruise heading with rudder 2017-11-09 09:39:44 +11:00
Michael du Breuil bd32b5deb7 Plane: update isFlying() landing check
When we are landing a sink_rate < -0.2f means the vehicle is climbing,
which should never happen during an approach for any supported landing
type (slope or deepstall), and on hard impacts with the ground its
common for the vehicle altitude to be projected to low and climb back to
the correct altitude slowly (but at a higher rate). This changes the
check to only consider sinks while on approach as acceptable.
2017-11-07 08:57:15 +01:00
Tom Pittenger 8029a7f10e
Plane: add Tom Pittenger to developers list
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2) but never to the main ArduPilot.c file.
2017-11-06 13:46:32 +01:00
Andrew Tridgell 5843086760 Plane: update release notes for 3.8.3beta4 2017-11-05 21:47:15 +11:00
Andrew Tridgell 957c1f6d23 Plane: extend QLOITER transition pitch limit
use twice transition time for pitch envelope to reduce QLOITER
transition harshness
2017-11-05 21:35:32 +11:00
Andrew Tridgell bbf98fae46 Plane: fixed a warning 2017-11-05 21:25:37 +11:00
Andrew Tridgell 9c8cd6c1cc Plane: added Q_TRANS_DECEL
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Andrew Tridgell e27c54a312 Plane: smooth out fwd tailsitter transition
use Q_TRANSITION_MS and the transition angle to pitch forward more
slowly
2017-11-05 17:25:00 +11:00
Andrew Tridgell 21164ef409 Plane: added tailsitter surface speed scaling
added scaling of control surfaces by throttle when in hover. This helps
the controller remain stable over a wide range of throttle levels, such
as when descending or rapidly climbing
2017-11-05 17:05:08 +11:00
Michael du Breuil 83decd1370 ArduPlane: Only run is_flying landing checks when in landing stage 2017-11-04 10:07:16 +11:00
Andrew Tridgell 126d5ce5d4 Plane: re-implement MIXING_OFFSET
this was lost in the conversion of SRV_Channels
2017-11-04 09:34:22 +11:00
Michael du Breuil e63e39c411 Plane: Don't broadcast PWM value that tripped throttle failsafe 2017-11-02 16:46:08 -07:00
Michael du Breuil d52f5155f0 Plane: Rename rc failsafe state members 2017-11-02 16:46:08 -07:00
nick2204 7d91755bd1 Plane: update Q_OPTIONS docs
Made q_options description a little clearer
2017-11-01 09:38:42 +11:00
Andrew Tridgell 1bee1dd210 Plane: log currently used airspeed
this logs whatever airspeed is being used for flight
2017-11-01 09:22:15 +11:00
Andrew Tridgell 43ee462813 Plane: prepare for 3.8.3beta2 2017-10-31 18:05:50 +11:00
Andrew Tridgell f14f40d3ef Plane: fixed GUIDED loiter with Q_RTL_MODE=1
this was broken by the recent RTL_RADIUS changes

thanks to Nick for noticing this!
2017-10-31 18:02:31 +11:00
Andrew Tridgell 84e5cd7e14 Plane: update release notes for 3.8.3beta1 2017-10-30 18:46:51 +11:00
Andrew Tridgell 1085069851 Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL 2017-10-30 16:52:19 +11:00
Andrew Tridgell aa430a6e2c Plane: use RTL_RADIUS for QRTL threshold
when Q_RTL_MODE=1 in a quadplane use RTL_RADIUS as the distance to
switch to QRTL mode. We navigate to the destination using direct
waypoint navigation instead of using a loiter circle.
2017-10-30 16:30:38 +11:00
Andrew Tridgell 552faa8f67 Plane: smoother tailsitter transitions
this smooths out tailsitter transitions in both directions, adding a
new FW to VTOL transition state
2017-10-30 16:30:38 +11:00
Andrew Tridgell c24ee9192b Plane: prevent a float exception at pitch 90
this can happen with a tailsitter
2017-10-30 16:30:38 +11:00
Andrew Tridgell 214434a2d7 Plane: fixed tailsitter ANGLE_WAIT transition
we need vtol control during transition from hover to fwd flight
2017-10-30 16:30:38 +11:00
Andrew Tridgell af893ddde7 Plane: implement Q_OPTIONS
this allows for NAV_TAKEOFF to be treated as NAV_VTOL_TAKEOFF in
quadplanes, and for level flight to be maintained during quadplane
transitions
2017-10-30 16:30:10 +11:00
Andrew Tridgell 02f8d888c3 Plane: relax controllers when disarmed
this prevents any remaining integrator from a previous flight stage from
affecting flight across a disarm
2017-10-30 16:30:10 +11:00
Peter Barker d49be616da Plane: call ins's periodic function 2017-10-27 16:33:45 +11:00
Tom Pittenger 8adacfeea3 Plane: always log MODE and include reason when logging is enabled 2017-10-25 21:18:29 +11:00
Andrew Tridgell 92ee05b925 Plane: fixed motor channel handling 2017-10-25 11:39:11 +11:00
Peter Barker 4ce051af82 Plane: ensure we're in short failsafe before using failsafe.ch3_timer_ms 2017-10-24 09:28:13 +11:00
Peter Barker ff88b0dfda Plane: remove redundant failsafe string 2017-10-24 09:28:13 +11:00
Peter Barker 7feef72b34 Plane: improve failsafe notifications 2017-10-24 09:28:13 +11:00
Peter Barker 01d8c506d2 Plane: add option to entirely disable short failsafe 2017-10-24 09:28:13 +11:00
Andrew Tridgell 6526ff504d Plane: fix for changes to AP_Motors API 2017-10-22 15:52:50 +11:00
Andrew Tridgell e008559b6e Plane: support LOITER_TO_ALT in quadplanes 2017-10-21 18:50:01 +11:00
Andrew Tridgell 8178ab4037 Plane: make mav_type in HEARTBEAT configurable
needed for qgc to setup for quadplanes
2017-10-20 15:41:06 +11:00
Andrew Tridgell 0aed5a9a57 Plane: prevent controller windup on ground
when on the ground in an auto-throttle mode lik FBWB or CRUISE, we may
have the throttle suppressed. In that case we should not run the
multicopter controller on quadplanes, or it may build up control which
will then apply on takeoff. This is particularly severe for aircraft
that are not level on the ground, such as taildragger quadplanes

Fixes https://discuss.ardupilot.org/t/quadplane-flips-on-takeoff/22095

many thanks to Sriram for reporting
2017-10-20 15:41:04 +11:00
Andrew Tridgell 1a95dcbdd7 Plane: update docs for Q_YAW_RATE_MAX 2017-10-20 15:40:58 +11:00
Michael du Breuil 615f6dfadb Plane: Don't log PIDL messages 2017-10-17 14:37:11 -07:00
Michael du Breuil cc55e5a8fa Plane: Don't log SONR if there are no rangefinders 2017-10-16 10:10:26 -07:00
Andrew Tridgell f81ec9b1b3 Plane: support simple accelcal 2017-10-10 10:57:38 +11:00
Andrew Tridgell f5b4d8d99c Plane: added frame type 11 for FlreFlyY6 2017-10-06 11:36:34 +11:00
Michael du Breuil 52fc2c82af Plane: Report GPS health 2017-09-27 19:29:32 +01:00
Lucas De Marchi a2b67ed615 ArduPlane: use static method to construct AP_Landing 2017-09-26 03:01:21 +01:00
Lucas De Marchi e10c60e492 ArduPlane: use static method to construct controllers 2017-09-26 03:01:21 +01:00
Lucas De Marchi 05c870a4d4 ArduPlane: use static method to construct AP_TECS 2017-09-26 03:01:21 +01:00
Lucas De Marchi bfd13dfe87 global: use static method to construct AP_AHRS_DCM 2017-09-26 03:01:21 +01:00
Lucas De Marchi beabae6a98 global: use static method to construct AP_AHRS_NavEKF 2017-09-26 03:01:21 +01:00
Lucas De Marchi c9fbf7b722 global: use static method to construct AP_NavEKF3 2017-09-26 03:01:21 +01:00
Lucas De Marchi e2fe36357a global: use static method to construct AP_NavEKF2 2017-09-26 03:01:21 +01:00
Lucas De Marchi 6781a44046 global: use static method to construct AP_Avoidance_* 2017-09-26 03:01:21 +01:00
Lucas De Marchi 119e82f32e ArduPlane: add static create method for AP_Avoidance_* 2017-09-26 03:01:21 +01:00
Lucas De Marchi 6d009cdf6e global: use static method to construct AP_ADSB 2017-09-26 03:01:21 +01:00
Lucas De Marchi cf6ea9642e global: use static method to construct AP_Terrain 2017-09-26 03:01:21 +01:00
Lucas De Marchi 31db77e47b global: use static method to construct AP_Parachute 2017-09-26 03:01:21 +01:00
Lucas De Marchi eadd650d78 global: use static method to construct AP_RSSI 2017-09-26 03:01:21 +01:00
Lucas De Marchi b05610870c global: use static method to construct AP_Rally 2017-09-26 03:01:21 +01:00
Lucas De Marchi 18aa88b329 global: use static method to construct AP_Mount 2017-09-26 03:01:21 +01:00
Lucas De Marchi c3647f0185 global: use static method to construct AP_Camera 2017-09-26 03:01:21 +01:00
Lucas De Marchi cc53e7bc4b global: use static method to construct AP_ServoRelayEvents 2017-09-26 03:01:21 +01:00
Lucas De Marchi 13d7f58036 global: use static method to construct AP_Relay 2017-09-26 03:01:21 +01:00
Lucas De Marchi 9ce6019138 global: use static method to construct AP_Frsky_Telem 2017-09-26 03:01:21 +01:00
Lucas De Marchi b022c02029 global: use static method to construct AP_BattMonitor 2017-09-26 03:01:21 +01:00
Lucas De Marchi 69b6d95cb2 global: use static method to construct AP_Board_Config{,_CAN} 2017-09-26 03:01:21 +01:00
Lucas De Marchi a74e700006 global: use static method to construct RCMapper 2017-09-26 03:01:21 +01:00
Lucas De Marchi 72fd2d6f05 global: use static method to construct AP_SerialManager 2017-09-26 03:01:21 +01:00
Lucas De Marchi fbe0d9761c global: use static method to construct AP_OpticalFlow 2017-09-26 03:01:21 +01:00
Lucas De Marchi 2d2876a226 ArduPlane: use static method to construct AP_Arming_Plane 2017-09-26 03:01:21 +01:00
Lucas De Marchi b36a5919f5 global: use static method to construct AP_Mission
This also move the initialization to be in the header for those that
weren't already to maintain consistency.
2017-09-26 03:01:21 +01:00
Lucas De Marchi de5e044b02 global: use static method to construct AP_RPM 2017-09-26 03:01:21 +01:00
Lucas De Marchi 40fd1b346c global: remove rangefinder from AP_AHRS_NavEKF
AP_AHRS_NavEKF doesn't use the rangefinder, it just delegates the
calls to the right estimator.

For libraries/AP_AHRS/examples/AHRS_Test/AHRS_Test.cpp the initialization
order has also been modified to match the order on vehicles. It's more
correct since it passes a reference when EKF2/EKF3 are already
constructed, while thos constructors use a pointer.  Ideally these
should be moved to an init() method though, or use a get_instance().
2017-09-26 03:01:21 +01:00
Lucas De Marchi 9027a55696 global: use static method to construct RangeFinder 2017-09-26 03:01:21 +01:00
Lucas De Marchi f5c2ffffb9 global: remove DataFlash from AP_Mount::init() 2017-09-26 03:01:21 +01:00
Lucas De Marchi 53c82b4aaf global: use static method to construct DataFlash_Class 2017-09-26 03:01:21 +01:00
Lucas De Marchi 62ac0ab8aa global: use static method to construct AP_Notify 2017-09-26 03:01:21 +01:00
Lucas De Marchi de680dac5b global: use static method to construct AP_Scheduler 2017-09-26 03:01:21 +01:00
Lucas De Marchi 8094482f21 global: use static method to construct AP_GPS 2017-09-26 03:01:21 +01:00
Lucas De Marchi 87b30b4552 global: use static method to construct AP_InertialSensor 2017-09-26 03:01:21 +01:00
Lucas De Marchi c1a957fbf3 global: use static method to construct Compass 2017-09-26 03:01:21 +01:00
Lucas De Marchi 91feec0e14 global: use static method to construct AP_Baro 2017-09-26 03:01:21 +01:00
Lucas De Marchi 96e7ea4d69 ArduPlane: protect version.h from inclusion and use ap_version.h 2017-09-23 21:37:45 -07:00
Lucas De Marchi 36c80daa86 ArduPlane: do not include version.h/ap_version.h
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Lucas De Marchi 18ff17e22c ArduPlane: move version to a static member
We should never include version.h or ap_version.h headers directly
on a header since this will trigger a complete rebuild of the
codebase when we commit to the repository. The ap_version.h header
is auto-generated containing information from the current commit.

If we include it in a header, every other file that ends up including
that header (directly or indirectly) will need to be rebuilt. No
ccache's cache beats having to do nothing when the header is just
not included.

version.h contains information that is kept on a struct inside
each vehicle. Rather than using the macros from each vehicle,
the getter should be preferred, which returns an AP_FWVersion
referente.
2017-09-23 21:37:45 -07:00
Ferruccio Vicari 85ab3edc5f Plane: Smoother transition to QLOITER and QLAND
Use estimated stopping position
2017-09-21 07:57:38 +10:00
Peter Barker 1a724ded2a Plane: AP_Arming: sanity-check fs timeout parameters 2017-09-20 09:46:24 -07:00
mirkix 7c6be7c421 Plane: change format of reset alt target message 2017-09-20 20:28:53 +10:00
Randy Mackay 667cdcdfcf Plane: resolve compiler warning while using send_text
non-functional change
2017-09-20 12:14:38 +09:00
Randy Mackay 2073d65975 Plane: command-long DO_SET_HOME check first param is zero 2017-09-20 12:14:38 +09:00
Randy Mackay 640fb91329 Plane: accept DO_SET_HOME within COMMAND_INT 2017-09-20 12:14:38 +09:00
Andrew Tridgell 3d16ca7144 Plane: fixed MANUAL_RCMASK
ensure it only applies in MANUAL, and fixed input scaling in px4io
2017-09-19 17:05:56 +10:00
Peter Barker 7e631ba16c Plane: move handling of SET_GPS_GLOBAL_ORIGIN up 2017-09-19 15:44:23 +09:00
mirkix b682f3f6d9 Plane: fix parameter units 2017-09-19 11:34:26 +10:00
Randy Mackay 3d7b6ddc40 Plane: support SET_GPS_GLOBAL_ORIGIN message 2017-09-19 10:30:15 +09:00
Peter Barker 1304b86d09 Plane: remove old DO_SET_MODE support
We no longer support setting anything except custom-modes
2017-09-19 01:24:11 +01:00
Andrew Tridgell 35c1a732a6 Plane: allow takeoff in guided then fw loiter
this allows for quadplane takeoff in GUIDED with Q_GUIDED_MODE=0. The
takeoff will be VTOL, but subsequent guided points will be fixed wing
2017-09-18 10:21:53 +10:00
Tom Pittenger 85b7f1bbb4 Plane: guided takeoff success should return true 2017-09-13 14:46:22 -07:00
Michael du Breuil 4fd13d5205 Plane: Support landing terminations on landing backends that support it 2017-09-13 13:15:08 -07:00
Peter Barker aee939f891 Plane: move gcs_out_of_time into GCS object 2017-09-12 18:28:07 +01:00
Andrew Tridgell 73d6a05241 Plane: support change alt for GUIDED from qgc 2017-09-11 13:26:48 +10:00
Andrew Tridgell 1c75cd7039 Plane: update release notes for 3.8.2 2017-09-11 09:57:28 +10:00
Andrew Tridgell 11b9805dce Plane: added MANUAL_CONTROL support
allows for joystick with QGC
2017-09-11 07:55:48 +10:00
Andrew Tridgell 37220e1568 Plane: removed unused prototypes 2017-09-10 17:15:18 +10:00
David Ingraham 750212eb8f Plane: Remove deprecated control surface mixing functions
This commit removes the deprecated functions used for calculating elevon and vtail mixes. This code is currently unrechable.
The functions that called these were removed in PR #6546.
2017-09-10 17:14:14 +10:00
Andrew Tridgell d61705ee51 Plane: added release notes for plane 3.8.2beta1 2017-09-09 08:32:14 +10:00
Andrew Tridgell 600a5c44d2 Plane: allow changing of target altitude in GUIDED 2017-09-09 08:14:09 +10:00
Andrew Tridgell bc17c26dbf Plane: limit pitch in transition to QLOITER and QLAND
when switching to QLOITER or QLAND when in forward flight, limit the
maximum pitch to prevent a sudden decelleration
2017-09-09 08:14:09 +10:00
Andrew Tridgell b6809655d4 Plane: smooth the transition to LAND_FINAL in quadplanes
this makes for a much smoother change to LAND_FINAL, without a jerk as
it changes vertical speed
2017-09-09 08:14:09 +10:00
Andrew Tridgell 8411ac5c57 Plane: fixed a problem with descent rate in landings for quadplanes
use xy controller instead of xyz controller, which prevents calling z
controller twice, which led to poor height control
2017-09-09 08:14:09 +10:00
Andrew Tridgell baee71a5b4 Plane: added GUIDED takeoff for quadplanes
this allows takeoff in GUIDED mode in the same way as copters
2017-09-09 08:14:09 +10:00
Michael du Breuil 1f5743e900 Plane: Report the primary magnetometer health rather then the first 2017-09-08 10:27:17 +10:00
Andrew Tridgell a88e663191 Plane: adjust target altitude slowly in QRTL mode
this fixes a sudden throttle drop when starting the descent in QRTL mode
thanks to Marco for finding this issue
2017-09-07 07:22:13 +10:00
Andrew Tridgell 87e52a9f0f Plane: prepare for 3.8.1 release 2017-09-03 19:31:30 +10:00
Peter Barker 0c7c2a41c4 Plane: handle param_request_list in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker dd4bffb4a2 Plane: handle param_set in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker 0db1711b1f Plane: move send_autopilot_request calls up to GCS base class 2017-08-30 15:54:46 +01:00
Peter Barker c15c1b84a4 Plane: add constant structure holding firmware version 2017-08-30 15:54:46 +01:00
Peter Barker 0708130b5e Plane: correct bad case fallthrough 2017-08-30 15:54:46 +01:00
Andrew Tridgell 6bfed07eae Plane: updated USE_REV_THRUST docs 2017-08-30 08:46:53 +10:00
Michael du Breuil 8630037fd7 Plane: Parameterize the home altitude reset conditions 2017-08-29 13:09:46 -07:00
Andrew Tridgell d541ac509f Plane: removed TRIM_RC_AT_START parameter
this option caused a lot more problems than it solved, and is buggy
2017-08-29 07:35:49 +10:00
Andrew Tridgell 1a207c919b Plane: fixed bug in TRIM_AUTO
fixed trim for differential spoilers
2017-08-29 07:35:49 +10:00
Andrew Tridgell 4124d371c9 Plane: fixed minacc and delay for launch
See
https://discuss.ardupilot.org/t/tkoff-thr-minacc-and-tkoff-thr-delay-doesnt-work-together/19928
2017-08-29 07:35:04 +10:00
Peter Barker 2861c1d06a Plane: add ArduSub to list of SYSID_SW_TYPE 2017-08-24 19:50:38 +09:00
Peter Barker 212174bc0e Plane: remove unused defines 2017-08-24 19:48:17 +09:00
Lucas De Marchi 44ffb67837 ArduPlane: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Randy Mackay c80a83322a Plane: integrate simpler Log_Write_EKF 2017-08-23 11:19:14 +09:00
Peter Barker 8272fb8fa2 Plane: remove unused repeating events defines 2017-08-22 09:58:12 -07:00
Peter Barker 9732b19f04 Plane: move serial_control case to base class 2017-08-17 12:42:31 +01:00
Peter Barker 4321abd477 Plane: move play_tune and led_control handling to base class 2017-08-17 12:27:10 +01:00
Peter Barker 8eeae45300 Plane: use GCS_MAVLINK subclasses to handle set_mode 2017-08-16 11:58:10 +10:00
Michael du Breuil 833ec1336e Plane: Expose the AFS instance to MAVLink 2017-08-15 15:14:56 +01:00
Peter Barker 1a665280e9 Plane: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker d33cd801a1 Plane: send gps messages as separate queued messages 2017-08-09 16:18:22 +01:00
Peter Barker c3e86840b2 Plane: move sending of gps_raw up 2017-08-09 16:18:22 +01:00
Peter Barker 933cd7a44c Plane: move sending of system_time up 2017-08-09 16:18:22 +01:00
Peter Barker 4aee416c1d Plane: move sending of camera_feedback up 2017-08-09 16:18:22 +01:00
Peter Barker 9eb96886e5 Plane: move sending of meminfo up 2017-08-09 16:18:22 +01:00
Peter Barker a9c866f574 Plane: use new retry_deferred method 2017-08-05 23:14:36 +01:00
Andrew Tridgell 3802e7bc3b Plane: mark version as 3.8.1-dev 2017-08-05 17:19:32 +10:00
Andrew Tridgell 6e84210d1b Plane: prepare for plane 3.8.0 release 2017-08-05 17:19:32 +10:00
Peter Barker 4cb94b80ee Plane: move try_send_message queued_param_send up 2017-08-03 14:34:33 +01:00
Peter Barker 089f6f4650 Plane: move try_send_message send_hwstatus up 2017-08-03 14:33:37 +01:00
Peter Barker fee9e83881 Plane: move try_send_message mission handling up 2017-08-03 14:24:47 +01:00
Peter Barker a740c10dfe Plane: move try_send_message compass message handling up 2017-08-03 14:24:46 +01:00
Peter Barker 50cbbc324b Plane: base SYS_STATUS load average on variable loop rate 2017-08-01 19:39:27 +01:00
Andrew Tridgell 9b16836da5 Plane: cope better with more RC trim/min/max values
when min > trim we need to do RC scaling via rc_config. This loses the
ability to go beyond RC limits, but that can be coped with using
MANUAL_RCMASK
2017-08-01 08:25:32 +10:00
Andrew Tridgell 99df31f6ec Plane: fixes from review
thanks Francisco
2017-08-01 08:25:32 +10:00
Andrew Tridgell ea1a4bc176 Plane: improve px4_mixer handling of servo trim/min/max 2017-08-01 08:25:32 +10:00
Andrew Tridgell cff692ca48 Plane: implement MANUAL_RCMASK
this replaces the functionality of the old "with input"
aileron/elevator functions, but in a much more flexible way. It means
that people who want to fly in MANAUL mode will have the ability to
have full control of trims and mixing using transmitter mixers if they
need that functionality
2017-08-01 08:25:32 +10:00
Andrew Tridgell fedd2c558c Plane: added AETR log message
this makes debugging mixers much easier
2017-08-01 08:25:32 +10:00
Andrew Tridgell 5d91e29cea Plane: fixed px4_mixer for new function based mixing
this fixes the OVERRIDE_CHAN functionality to work correctly with the
new function based mixing code

It isn't a perfect match for ArduPilot mixing, but it is very close
for the key control surfaces, including mixed surfaces
2017-08-01 08:25:32 +10:00
Andrew Tridgell 0266168e69 Plane: removed old elevon and vtail mixers
now only use the function based mixing, and auto-convert on startup
2017-08-01 08:25:32 +10:00
Andrew Tridgell 178e7eca54 Plane: always setup target airspeed
this sets up a target airspeed even when flying without an airspeed
sensor. This is needed for quadplanes without airspeed sensors where
we use synthetic airspeed during the transition in TECS
2017-07-31 09:55:44 -07:00
Andrew Tridgell 909f109b3f Plane: don't start a transition while disarmed
this can caused flooding of the GCS console while disarmed in FBWA
mode
2017-07-30 12:39:36 -07:00
Peter Barker 1cb6962f84 Plane: move common mavlink camera handling up 2017-07-28 14:32:58 +01:00
Peter Barker 2fb46a67dd Plane: camera is responsible for taking distance-based-images and logging 2017-07-28 14:27:53 +01:00
Peter Barker fbcd072d98 Plane: move gps inject handling up to GCS_MAVLINK 2017-07-27 12:03:25 +01:00
Patrick José Pereira 60834e9af0 Plane: Allow a second activation of parachute
The hardware can fail in the first activation,
this patch allow a second chance to active the parachute successfully.

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-07-26 17:51:34 +01:00
Peter Barker 87af817893 Plane: handle common GPS messages in base GCS_MAVLINK class 2017-07-25 14:00:45 +01:00
Peter Barker fa39f315c6 Plane: move starting of new logs into DataFlash 2017-07-19 16:37:28 +01:00
Peter Barker ea892d278f Plane: remove MSG_STATUSTEXT entirely 2017-07-18 16:12:59 +01:00
Michael du Breuil f87a69dcf2 Plane: Throttle based landing aborts should ask the landing library
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker 7f0cb82797 Plane: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up 2017-07-17 14:17:19 +01:00
Peter Barker 6047026b11 Plane: move handling of MAG_CAL command longs up 2017-07-17 14:17:19 +01:00
Peter Barker 2b6752e0b4 Plane: move MAV_CMD_START_RX_PAIR handling to base class 2017-07-17 14:17:19 +01:00
Peter Barker 7042d3e9c9 Global: all vehicles get AP_Relay and AP_ServoRelayEvent libraries 2017-07-17 00:06:31 +01:00
Peter Barker 36eab56178 Plane: move mavlink support for servo/relay up 2017-07-16 23:56:00 +01:00
Peter Barker 3af52d9db3 Plane: add common handling of mavlink command messages 2017-07-16 23:56:00 +01:00
Michael du Breuil b8e6ad7476 Plane: Document loop max time as being in microseconds 2017-07-15 17:27:04 +09:00
Peter Barker 983686745e Plane: move rally-point handling up 2017-07-14 01:28:05 +01:00
Peter Barker a250f47f13 Plane: remove unneeded telemetry_delayed parameter 2017-07-12 17:01:36 +01:00
Peter Barker c9c4b31e99 Plane: move handling of incoming statutext messages up 2017-07-12 16:52:24 +01:00
Peter Barker c058fba5ac Plane: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 592729733e Copter: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Peter Barker 1be52495f1 Plane: eliminate global static GCS_MAVLINK::send_home_all 2017-07-11 23:48:39 +01:00
Peter Barker d850feb75f Plane: move common mission handling up to GCS_MAVLINK 2017-07-11 23:45:17 +01:00
Peter Barker 250f315678 Plane: eliminate gcs_send_mission_item_reached wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 3b0a7703c4 Plane: eliminate gcs_send_message wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 5a8f01c19c Plane: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Peter Barker 685706952c ArduPlane: use Notify singleton for sending statustext 2017-07-09 17:17:29 -04:00
Peter Barker 5b3b61a2e4 Plane: move GCS functions up to superclass GCS 2017-07-07 16:18:37 +01:00
Andrew Tridgell 1d626db3b1 Plane: use scaled outputs for AFS failsafe
we need to use scaled outputs so that derived outputs (such as elevons
and vtail) have a valid input to use
2017-07-04 07:59:28 +10:00
Peter Barker 923b201025 Plane: send servos outputs after flaperon update 2017-07-04 07:59:28 +10:00
Peter Barker 38921c4f1a Plane: correct AFS terminate for rcin/servos split 2017-07-04 07:59:28 +10:00
Eugene Shamaev b95ebadf8b ArduPlane: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Andrew Tridgell b2cd5f5c06 Plane: release 3.8.0beta5 2017-07-03 11:39:48 +10:00
Andrew Tridgell d3f9afd4e7 Plane: fixed auto-adjustment of flaperon trim 2017-07-03 11:17:42 +10:00
Andrew Tridgell 2cb511c049 Plane: deprecate old aileron_with_input and elevator_with_input
these have very rarely been used and don't work well with new trimming
mechanisms. Now treat them as ordinary ailerons/elevators
2017-07-03 11:17:42 +10:00
Andrew Tridgell 51b39ea3a1 Plane: removed ancient "mix_mode" type elevon mixing
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00