Peter Barker
f005ee4a4c
Copter: use camera singleton to get camera rather than callback
2018-08-31 15:48:56 +10:00
Peter Barker
ec52c22c7c
Copter: GCS_MAVLink uses compass singleton, stop implementing get_compass
2018-08-31 15:48:56 +10:00
Randy Mackay
920300899e
Copter: rename gcs_check_input to gcs_update
...
this makes the names consistent with Rover and Plane
2018-08-24 15:30:50 +09:00
Matt
fd332287b2
COPTER: Add mavlink landing gear control
...
Add MAV_CMD_AIRFRAME_CONFIGURATION (# 2520), which is for landing gear
control.
Param 1 is not used in ArduPilot
Param 2 is deploy/retract. 0 is deploy, 1 is Retract
2018-08-03 10:59:15 +09:00
Peter Barker
819d892baf
Copter: handle MAV_CMD_ACCELCAL_VEHICLE_POS in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
7fc580921a
Copter: handle command_long in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
aa4ee64af2
Copter: handle command_int in base class
2018-07-06 09:43:09 +10:00
Peter Barker
df83cb034e
Copter: use ArmingMethod enumeration
2018-07-03 15:16:38 +10:00
Peter Barker
c84b102c1c
Copter: move mavlink reboot code up to base class
2018-07-03 12:12:25 +10:00
Peter Barker
cff1969a29
Copter: make do_user_takeoff a member of Mode
2018-06-26 09:11:21 +09:00
Peter Barker
70d159cb38
Copter: raise EKF failure even if USB is connected
...
This will let EKF go bad if your PixHawk is connected to your laptop.
This doesn't seem to be a problem for the other vehicles.
This also allows the EKF to go bad in-flight if you happen to have
connected (against AP's recommendations) your companion computer to your
flight controller via USB. Since people do this, it is better to have
the checks than not.
2018-06-26 10:07:55 +10:00
Pierre Kancir
2d5cbd2cf8
ArduCopter: report crosstrack_error
2018-06-26 08:42:14 +09:00
Andrew Tridgell
b43316d743
Copter: added ESC_TELEMETRY to mavlink streams
2018-06-21 10:48:02 +10:00
Peter Barker
ca8a1ae488
Copter: use magic force arm/disarm definitions
2018-06-20 11:43:38 +10:00
Peter Barker
fd9ce90b8e
Copter: option to force arm, bypassing checks
2018-06-20 11:43:38 +10:00
Peter Barker
4d6408857f
Copter: return appropriate response to failed disarm
2018-06-20 11:43:38 +10:00
Peter Barker
485cafb343
Copter: use AP_FWVersion singleton
2018-06-18 19:10:37 +01:00
Peter Barker
955baa47c2
Copter: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Michael du Breuil
6c94811e00
Copter: Update to support new RC override conventions
2018-06-05 09:51:09 +10:00
Peter Barker
78d2c52a3f
Copter: move try_send_message handling of EKF_STATUS_REPORT up
2018-06-01 16:12:45 +01:00
Peter Barker
7c98082389
Copter: create persist_streamrates() callback to indicate persistence
2018-05-29 13:08:29 +10:00
Peter Barker
5f2221fe74
Copter: move handling of VFR_HUD into GCS_MAVLink_Copter
2018-05-29 13:00:40 +10:00
Peter Barker
81e9edd80a
Copter: move sending of sim state up
2018-05-23 18:36:50 +10:00
Peter Barker
ec1539f9c8
Copter: add type-correctness for stream messages
2018-05-22 11:21:25 +10:00
Peter Barker
de7a8e20e2
Copter: eliminate MSG_LIMITS_STATUS
2018-05-22 09:05:14 +09:00
Peter Barker
50ca76b6bd
Copter: move try_send_message of servo-output-raw up
2018-05-21 19:08:08 +01:00
Peter Barker
7c8583d51d
Copter: implement sending of position_target_global_int
2018-05-18 20:26:37 +10:00
Peter Barker
33582107b6
Copter: move sending of GLOBAL_POSITION_INT up to GCS_MAVLINK
2018-05-17 15:48:06 +01:00
Peter Barker
da1b2579c4
Copter: move send_attitude up to GCS_MAVLINK
2018-05-17 18:28:43 +10:00
Peter Barker
e4a2b03488
Copter: move try_send_message sending of scaled_pressure up
2018-05-17 15:37:14 +10:00
Peter Barker
88883c7c7f
Copter: move try_send_message sending of sensor offsets up
2018-05-17 15:37:14 +10:00
Peter Barker
93f1815d50
Copter: move try_send_message of RAW_IMU up to GCS_MAVLINK
2018-05-17 15:37:14 +10:00
Peter Barker
9dce133938
Copter: handle setting of ekf origin in GCS_MAVLink
2018-05-17 10:13:42 +10:00
Michael du Breuil
fe8e1b4274
Copter: Move MAVLink rangefinder up to parent
2018-05-16 23:21:41 +01:00
Michael du Breuil
033a8ec4d5
Copter: Send all distance sensors
2018-05-16 23:21:41 +01:00
Peter Barker
ec6fb0c612
Copter: move sending of battery data up
2018-05-09 11:40:31 -07:00
Peter Barker
e90ce4ced9
Copter: move data stream send up
2018-05-09 16:15:38 +10:00
Peter Barker
dee40f3fe5
Copter: make scheduler track whether it has called the delay callback
2018-05-09 16:15:38 +10:00
Peter Barker
6dd9f50f7c
Copter: move try_send_message handling of RC_CHANNELS up
2018-05-08 12:33:32 +01:00
Peter Barker
75ad33ddcd
Copter: move try_send_message of heartbeats up to GCS_MAVLINK
2018-05-07 11:30:13 -06:00
Peter Barker
d7af5c0c44
Copter: move try_send_message handling of VIBRATION up
2018-05-07 11:23:28 -06:00
Dr.-Ing. Amilcar do Carmo Lucas
c8d1dad493
Copter: document stream content
2018-04-27 19:54:00 +09:00
Peter Barker
4b5953734d
Copter: use AP_ServoRelayEvents singleton
2018-04-18 20:31:55 +09:00
Peter Barker
ba8b3e2415
Copter: create an AutoYaw helper object to hold auto-yaw state
2018-04-18 13:27:43 +09:00
Michael du Breuil
d96919ed21
Copter: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Michael du Breuil
adb7ecef92
Copter: Check MANUAL_CONTROL target
2018-04-10 16:54:34 +01:00
Francisco Ferreira
8ff74f31e9
Copter: fix method shadowing
2018-04-03 16:29:33 +01:00
Peter Barker
0c8110ecb2
Copter: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Peter Barker
d58e2214d2
Copter: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
cca4d5136e
Copter: move common calibration functions up
2018-04-02 23:25:05 +01:00
Peter Barker
c80714b820
Copter: factor out preflight calibration function
2018-04-02 23:25:05 +01:00
Dr.-Ing. Amilcar do Carmo Lucas
d633ba8c46
Copter: Add option to disable RPM module
2018-03-30 09:36:48 +09:00
Peter Barker
ce0f0938ee
Copter: make superclass handle command_ack packets
2018-03-28 09:28:23 +09:00
Michael du Breuil
291531e056
Copter: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Peter Barker
f8d5fe96d8
Copter: allow DataFlash to handle log sending
2018-03-26 09:22:47 +09:00
Peter Barker
41960704b0
Copter: move handling of visual odometry messages up
2018-03-23 09:28:07 +09:00
Peter Barker
edcfa7ffd4
Copter: move handling of get_home_position up
2018-03-19 10:32:37 +09:00
Peter Barker
45f2312bfe
Copter: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
d88bd52a53
Copter: use baro singleton
2018-03-08 21:20:05 -08:00
Peter Barker
9bffeb4117
Copter: use AHRS singleton in GCS_MAVLink
2018-03-07 12:34:39 +00:00
Peter Barker
af56826107
Copter: follow mode fixups
...
add follow to FLTMODEx param descriptions
remove follow's set_velocity method
10hz logging of desired velocity in follow mode
follow mode uses pos error P gain
add send-debug-via-mavlink option
don't enter follow if follow lib is disabled
follow debug slowed to 1hz
disable follow on min-features builds
2018-03-05 15:08:08 +09:00
Randy Mackay
6ee101ca98
Copter: rename chase to follow
2018-03-05 15:08:08 +09:00
Randy Mackay
053983eb70
Copter: integrate AP_Follow into chase mode
2018-03-05 15:08:08 +09:00
Peter Barker
199455dc56
Copter: add chase mode
2018-03-05 15:08:08 +09:00
Peter Barker
86b162e32f
Copter: add option to disable BRAKE flight mode
2018-02-27 07:43:13 +09:00
Peter Barker
b8c432b1a1
Copter: add option to disable GUIDED flight mode
...
Saves about 6kB of flash
2018-02-27 07:43:13 +09:00
Peter Barker
b9ad2bc8db
Copter: add option to disable AUTO mode
...
Saves ~12k of flash
2018-02-27 07:43:13 +09:00
Peter Barker
eb9bbddcb7
Copter: add in_guided_mode mode callback
2018-02-27 07:43:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
def098bd8a
Copter: obey ADSB_ENABLED == DISABLED
2018-02-21 22:11:34 +09:00
Peter Barker
bfc373aeff
Copter: move logging of PM messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Randy Mackay
9eda7f4e31
Copter: global-pos-int uses system time
2018-02-13 08:52:48 +09:00
murata
296ee7315b
Copter: minor formatting fixes
2018-02-12 12:17:05 +09:00
murata
c31c2a4cf1
Copter: optionalize the winch
2018-02-12 12:16:57 +09:00
Peter Barker
40d74584ac
Copter: remove shims used in scheduler
2018-02-12 11:19:34 +09:00
Andrew Tridgell
af4f0c29ba
Copter: enable TMODE (ToyMode) support
...
this is for the skyviper button based transmitter control
2018-02-08 17:36:33 +11:00
Andrew Tridgell
1f76f69d80
Copter: implement per-motor compass compensation
2018-02-08 17:36:33 +11:00
Pierre Kancir
10e6fe43dd
Copter: Add a switch option to enable/disable RC_Override
2018-01-24 21:37:41 +09:00
Randy Mackay
8d6f8e4d9c
Copter: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Alexey Bulatov
8accfb97f6
ArduCopter: Check for nullptr for motors class pointer
...
Because of added initialisation of UAVCAN send_heartbeat function
starts before motors initialisation. So we need check is object created.
2018-01-17 07:24:17 -08:00
Matt
c0f0e3eca3
COPTER: Fix MOUNT_CONTROL yaw in guided
...
If the mount instance does not support yaw/pan, the copter needs to yaw in
response to MSG_MOUNT_CONTROL and MAV_COMMAND_DO_MOUNT_CONTROL commands from
a GCS or co-computer. There was no checking for mount pan in the GCS_Mavlink
logic. As such, no yaw takes place when a mount control command calls for it.
This patch impliments copter yaw control for both MSG_MOUNT_CONTROL and
MAV_COMMAND_DO_MOUNT_CONTROL in copter GCS_Mavlink.
2017-12-23 10:57:31 +09:00
Peter Barker
6c82f7671d
Copter: move all commands logic into AUTO flightmode
2017-12-14 14:08:01 +09:00
Randy Mackay
2d23e1f7c7
Copter: rename flightmode_ objects to mode_
2017-12-12 10:39:26 +09:00
Peter Barker
103e2cc711
Copter: calculate wp bearing and distance on demand
...
Move responsibility for calculating wp bearing/distance
into the FlightMode object doing the navigation
Calculating these variables was being done at 50Hz where they
were used at 10Hz max.
2017-12-07 07:43:08 +09:00
Peter Barker
51cd143012
Copter: FlightMode - convert BRAKE flight mode
2017-12-06 08:24:24 +09:00
Peter Barker
2db09ba0f7
Copter: FlightMode - convert GUIDED flight mode
2017-12-06 08:24:24 +09:00
Peter Barker
e2b70c3a0a
Copter: FlightMode - convert AUTO flight mode
2017-12-06 08:24:24 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
ce3197e0ac
Copter: use the return code of the guided_set_destination_posvel() function calls
2017-12-05 08:57:55 +09:00
Peter Barker
398d07a68a
Copter: tighten return types of mavlink functions and variables
2017-12-01 17:01:10 +00:00
Randy Mackay
8d2db3218c
Copter: minor comment fix to code handling SET_POSITION_TARGET msgs
2017-11-27 14:24:30 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
bde1aaa2f6
Copter: Rename variable to correct the meaning (NFC)
2017-11-27 14:17:21 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
8678d13e7b
Copter: Update the result of a MavLink message, this is a NFC
...
The result variable is not used, but at least it gets documented :)
2017-11-27 14:17:21 +09:00
Andrew Tridgell
a644cff921
Copter: support testing multiple motors with motortest
...
this matches the quadplane behaviour, allowing a sequence of motors to
be tested
2017-11-27 10:15:31 +09:00
Peter Barker
8f48b3187e
Copter: use gps singleton for GCS function
2017-11-15 13:43:03 +00:00
Randy Mackay
842eed5426
Copter: accept do-winch commands with max rate
2017-10-27 09:20:38 +09:00
Randy Mackay
787954fa37
Copter: integrate winch library
...
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Andrew Tridgell
f49ab44f25
Copter: support simple accel calibration
2017-10-10 10:57:38 +11:00
Lucas De Marchi
4ef5186733
ArduCopter: do not include version.h/ap_version.h
...
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Randy Mackay
a8a5c1d332
Copter: command-long DO_SET_HOME check first param is zero
...
Also do not use current location just because lat,lon,alt are all zero
2017-09-20 12:14:38 +09:00
Randy Mackay
d982cfed4a
Copter: accept DO_SET_HOME within COMMAND_INT
2017-09-20 12:14:38 +09:00
Randy Mackay
70cf21a5ba
Copter: accept more mav-frame types
...
accept mav frames whether or not they have _INT appended
2017-09-20 12:14:38 +09:00
Peter Barker
0afe1e7473
Copter: move handling of SET_GPS_GLOBAL_ORIGIN up
2017-09-19 15:44:23 +09:00
Randy Mackay
1b3cc9289b
Copter: support SET_GPS_GLOBAL_ORIGIN
...
also remove setting of origin from DO_SET_HOME command
initialise ekf_origin location when consuming SET_GPS_GLOBAL_ORIGIN
set_ekf_origin performs sanity check on location
2017-09-19 10:30:15 +09:00
Peter Barker
6b5fd5fbdd
Copter: move gcs_out_of_time into GCS object
2017-09-12 18:28:07 +01:00
squilter
4b57a4a231
Copter: rename SafeRTL to SmartRTL
2017-09-09 14:05:41 +09:00
Randy Mackay
8df042f00c
Copter: complete addition of SafeRTL flight mode
2017-09-09 14:05:41 +09:00
Peter Barker
3f67dfe4fe
Copter: move handling of do_send_banner up
2017-08-30 15:54:47 +01:00
Peter Barker
3da70f19c1
Copter: handle param_request_list in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
e6ac68fd2a
Copter: handle param_set in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
bb06db6389
Copter: move send_autopilot_request calls up to GCS base class
2017-08-30 15:54:46 +01:00
Peter Barker
470e790117
Copter: add constant structure holding firmware version
2017-08-30 15:54:46 +01:00
Peter Barker
19e409f7f4
Copter: move serial_control case to base class
2017-08-17 12:42:31 +01:00
Peter Barker
6db348bab3
Copter: move play_tune and led_control handling to base class
2017-08-17 12:27:10 +01:00
Peter Barker
aa06fc499c
Copter: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:58:10 +10:00
Michael du Breuil
5cfe4d5a8c
Copter: Expose the AFS instance to MAVLink
2017-08-15 15:14:56 +01:00
Peter Barker
55af774e98
Copter: send gps messages as separate queued messages
2017-08-09 16:18:22 +01:00
Peter Barker
56160a8bbd
Copter: move sending of gps_raw up
2017-08-09 16:18:22 +01:00
Peter Barker
ff81186951
Copter: move sending of system_time up
2017-08-09 16:18:22 +01:00
Peter Barker
7ca146878d
Copter: move sending of camera_feedback up
2017-08-09 16:18:22 +01:00
Peter Barker
da889bdff5
Copter: move sending of meminfo up
2017-08-09 16:18:22 +01:00
Peter Barker
c36a20ab54
Copter: use new retry_deferred method
2017-08-05 23:14:31 +01:00
Peter Barker
db080ed60e
Copter: stop sending MSG_SERVO_OUT messages
...
This didn't ever result in a message being sent on Copter
2017-08-03 14:34:33 +01:00
Peter Barker
7c37bb324b
Copter: move try_send_message queued_param_send up
2017-08-03 14:34:33 +01:00
Peter Barker
431e3443bd
Copter: move try_send_message send_hwstatus up
2017-08-03 14:33:37 +01:00
Peter Barker
3e5665735f
Copter: move try_send_message mission handling up
2017-08-03 14:24:47 +01:00
Peter Barker
2a62b57e11
Copter: move try_send_message compass message handling up
2017-08-03 14:24:46 +01:00
Peter Barker
4b63443633
Copter: correct misleading comment
2017-08-03 14:24:46 +01:00
Peter Barker
31b33b2232
Copter: base SYS_STATUS load average on variable loop rate
2017-08-01 19:39:27 +01:00
Peter Barker
f56c9bd96d
Copter: move common mavlink camera handling up
2017-07-28 14:32:58 +01:00
Peter Barker
cdf9ebcb39
Copter: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Peter Barker
192310a68e
Copter: move gps inject handling up to GCS_MAVLINK
2017-07-27 12:03:25 +01:00
Peter Barker
f1ab50d4ea
Copter: handle common GPS messages in base GCS_MAVLINK class
2017-07-25 14:00:45 +01:00
khancyr
88aa1e447a
Copter: adapt to new send_proximity API
2017-07-24 13:44:43 +01:00
khancyr
49755063ab
Copter: move send_proximity to GCS common code (NFC)
2017-07-24 13:44:43 +01:00
Peter Barker
eb0edc9b5b
Copter: remove MSG_STATUSTEXT entirely
2017-07-18 16:12:59 +01:00
Peter Barker
ad1c379445
Copter: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up
2017-07-17 14:17:19 +01:00
Peter Barker
fe16691c6e
Copter: move handling of MAG_CAL command longs up
2017-07-17 14:17:19 +01:00
Peter Barker
ecda9116ba
Copter: move MAV_CMD_START_RX_PAIR handling to base class
2017-07-17 14:17:19 +01:00
Peter Barker
b14964eb1e
Copter: move mavlink support for servo/relay up
2017-07-16 23:56:00 +01:00
Peter Barker
3e3a8717c5
Copter: add common handling of mavlink command messages
2017-07-16 23:56:00 +01:00
Peter Barker
480a83fdef
Copter: move rally-point handling up
2017-07-14 01:28:05 +01:00
Peter Barker
7bb28175d7
Copter: remove unneeded telemetry_delayed parameter
2017-07-12 17:01:36 +01:00
Peter Barker
016eeaa258
Copter: move handling of incoming statutext messages up
2017-07-12 16:52:24 +01:00
Randy Mackay
2b98fd765d
Copter: guided_set_destination accepts relative yaw
2017-07-12 13:27:45 +09:00
Randy Mackay
4c9e118ceb
Copter: set_auto_yaw_look_at_heading takes bool for relative angle arg
...
No functional change
2017-07-12 13:27:45 +09:00
kouseii
4dd7d9eaff
Copter: guided mode supports heading and yaw-rate target
2017-07-12 13:27:45 +09:00
Peter Barker
8a1fc6a406
Copter: remove global static send_statustext_chan
2017-07-11 23:53:53 +01:00
Peter Barker
3660236a0d
Copter: move common mission handling up to GCS_MAVLINK
2017-07-11 23:45:16 +01:00
Peter Barker
358555446b
Copter: eliminate gcs_send_mission_item_reached wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
0ac045febe
Copter: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
f60389d4aa
Copter: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
037cd2e9c6
ArduCopter: use Notify singleton for sending statustext
2017-07-09 17:17:29 -04:00
Peter Barker
d9b45cc202
Copter: create GCS subclass, use inheritted methods
2017-07-07 16:18:37 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas
9994e9b773
Copter: improve stream descriptions (NFC)
2017-07-04 08:12:57 +09:00
Peter Barker
8b57405143
Copter: handle knowledge of in_log_download in DataFlash
2017-06-27 03:10:43 +01:00
Peter Barker
45a55bfa5f
Copter: move send-logs-via-mavlink code into DataFlash
2017-06-27 03:10:43 +01:00
Michael du Breuil
f0cb234228
Copter: Handle NAV_CONTROLLER_OUTPUT.wp_dist overflowing
2017-06-20 15:41:50 +01:00
Peter Barker
4af3b31128
Copter: move MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS handling up
2017-06-17 15:07:48 +01:00
Peter Barker
4163455d97
Copter: stop using in_mavlink_delay as a proxy for disabling logging
2017-06-16 17:07:48 +01:00
Pierre Kancir
d5cc1e64ed
GCS_Common: rename send_rangefinder to send_rangefinder_downward
2017-06-08 01:32:04 +01:00
Pierre Kancir
73038a0e09
ArduCopter: GCS_mavlink style correction
2017-06-08 01:31:52 +01:00
Pierre Kancir
ac0a300415
ArduCopter: correct msg send by proximity
2017-06-08 01:31:52 +01:00
Pierre Kancir
261eb387eb
ArduCopter: change rangefinder msg for common one
2017-06-08 01:31:43 +01:00
Pierre Kancir
156863d10a
ArduCopter: add DISTANCE_SENSOR support
2017-06-08 01:22:07 +01:00
Peter Barker
758414cfe5
Copter: allow mavlink messages to be exchanged on failed boot
2017-06-07 12:56:46 +01:00
Randy Mackay
814cadac68
Copter: consolidate set_home functions
...
added lock argument instead of having twice as many functions
no functional change
2017-06-07 13:01:38 +09:00
Paulo Neves
9c6a7c170f
Copter: Add MAV_CMD_DO_SET_CAM_TRIGG_DIST support
2017-05-25 09:35:22 +09:00
Michael du Breuil
6ba53cf11c
Copter: Ignore Landing message
2017-05-24 15:22:27 -07:00
Randy Mackay
91d4b4777b
Copter: respond to param list request after motor init
2017-05-15 14:13:43 +09:00
Andrew Tridgell
22791b7272
Copter: use common send_queued_parameters()
2017-05-01 14:36:10 +10:00
Randy Mackay
8f43b60247
Copter: set EKF origin from first do-set-home command
2017-04-22 10:37:31 +09:00
Randy Mackay
3348ab4fa8
Copter: send upward DISTANCE_SENSOR message to GCS
2017-04-20 18:11:43 +09:00
Randy Mackay
496e8f3cdb
Copter: integrate proximity method rename
2017-04-20 18:11:43 +09:00
Andrew Tridgell
1a8669201e
Copter: ignore MSG_AOA_SSA
2017-04-19 20:48:42 +10:00
Randy Mackay
713c08672f
Copter: integrate AP_VisualOdom
2017-04-19 11:04:40 +09:00
Francisco Ferreira
bf22919a8c
Copter: add support for MANUAL_CONTROL message
2017-04-12 16:16:11 +09:00
Michael du Breuil
ea89bd1178
Copter: Send BATTERY_STATUS
2017-04-12 10:21:49 +09:00
Randy Mackay
51c00f8144
Copter: use only downward facing rangefinder
2017-02-27 15:18:16 +09:00
Andrew Tridgell
7efca1881c
Copter: fixed a problem with initial parameter fetch
...
if the GCS connects before the motors have been allocated then it will
get an incorrect parameter count from the MAVLink param protocol. We
need to prevent the PARAM_REQUEST_LIST message from being replied to
until motors are allocated which is done as part of init_ardupilot
2017-02-15 17:16:30 +10:00
Peter Barker
65a182a068
Copter: not in log download upon log erase
...
erase is a synchronous operation
2017-02-13 11:36:16 +11:00
Peter Barker
029aeeb4fd
Copter: support for a GCS singleton
2017-02-13 09:32:01 +11:00
Peter Barker
f49f153da0
Copter: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
4161c34e61
Copter: rename MSG_RADIO_OUT to MSG_SERVO_OUTPUT_RAW to better describe what it is
2017-02-07 11:41:12 +11:00
Peter Barker
4aaeb4bfed
Copter: get mav heartbeats out when board detection fails
2017-01-27 13:48:23 +09:00
Dmitry Prokhorov
3e993f955e
ArduCopter: Support for OLED display by Alexey Kozin
2017-01-23 15:07:20 -08:00
Andrew Tridgell
0f6d0c5ba9
Copter: combined tri, single, coax and multicopter into a single build
...
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Andrew Tridgell
5a87ae3f01
Copter: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Francisco Ferreira
11b635df12
Copter: correct limit status to fence status
2017-01-12 02:00:51 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
712fbfe84b
Copter: Update descriptions of stream rate parameters
2017-01-12 01:47:12 +00:00
Randy Mackay
20ca021cab
Copter: pass distance-sensor messages to AP_Proximity
2017-01-11 21:48:23 +09:00
Randy Mackay
0ac00dbfd6
Copter: add FRAME_CLASS parameter
2016-12-31 10:55:23 +09:00
Randy Mackay
c1d1ac5c6f
Copter: pass HIL_GPS to gps driver
2016-12-08 15:52:26 +09:00
Randy Mackay
7485de3498
Copter: add send_proximity to send distances to GCS
2016-11-27 15:05:46 +09:00
Peter Barker
469f0f0bf0
Copter: remove incorrect comment from PRECISION_LANDING block
2016-11-18 09:41:56 +09:00
Francisco Ferreira
84436ff5ae
Copter: sipport MAV_CMD_ACCELCAL_VEHICLE_POS
2016-11-15 11:42:54 -08:00
Andrew Tridgell
df3e434607
Copter: use handle_common_message()
2016-11-09 17:08:09 +11:00
floaledm
53fcbcb6c3
Copter: send ahrs groundspeed estimate instead of GPS groundspeed in VFR_HUD message
2016-11-07 09:14:28 +11:00
Peter Barker
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
2016-11-05 10:20:39 +09:00
murata
965a6a5719
Copter: To nullptr from NULL.
2016-10-28 10:53:31 -07:00
Andrew Tridgell
1b46a71596
Copter: also update sensor status before mavlink send
...
this removes the 1 second lag in updates when using the one second
loop
2016-10-28 10:05:40 +11:00
floaledm
34718b130a
Copter: update sensor status error flags independently of sending a sys_status message
...
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
2016-10-28 10:03:38 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
57830784e2
Copter: use handle_rc_bind
2016-10-15 21:42:38 +11:00
Andrew Tridgell
5a9276a5c4
Copter: added SYSID_ENFORCE parameter
...
allows enforcement of SYSID_MYGCS
2016-10-15 17:14:19 +11:00
Randy Mackay
0aab175051
Copter: move proximity to g2
2016-10-14 14:02:29 +09:00
Andrew Tridgell
ebbcabcb5f
Copter: fixed comment
2016-10-14 11:40:09 +11:00
Randy Mackay
1665f4d416
Copter: report altitude and position control of new modes in sys-status message
2016-10-13 20:21:07 +09:00
Randy Mackay
4afa49eebe
Copter: report proximity health in system-status
2016-10-13 20:21:07 +09:00
Andrew Tridgell
652b6b7564
Copter: deprecate RC_CHANNELS_RAW
2016-10-13 21:24:02 +11:00
Michael du Breuil
ea45e5e6f1
Copter: Support GPS_RTCM_DATA
2016-10-11 11:00:36 +11:00
Lucas De Marchi
b24d850695
ArduCopter: Fix use of logical op instead of bitwise op
...
../../ArduCopter/GCS_Mavlink.cpp: In member function 'void Copter::send_extended_status1(mavlink_channel_t)':
../../ArduCopter/GCS_Mavlink.cpp:281:37: error: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Werror=parentheses]
uint32_t sensors_error_flags = !control_sensors_health & control_sensors_enabled & control_sensors_present;
^
compilation terminated due to -Wfatal-errors.
cc1plus: all warnings being treated as errors
Thanks to Ralph Campbell <ralphcampbell1@gmail.com> for the bug report.
2016-09-29 11:36:23 -03:00
Tom Pittenger
748beb094d
Copter: log to dataflash statustext messages from my_gcs
2016-09-26 00:13:30 -07:00
floaledm
5910c94b65
Copter: change sensor health check to prevent false positive
2016-09-22 13:56:49 -05:00
Andrew Tridgell
d0dd10aeea
Copter: added DEV_OPTIONS parameter
...
this is for little used options to allow standard firmware builds to
enable those options for development purposes
First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Michael du Breuil
bec4bfa2ba
Copter: Return RESULT_FAILED for GET_CMD_HOME if home is unset
2016-09-03 16:54:16 +09:00
Randy Mackay
a8a31b1c24
Copter: fix health reporting to GCS for optical flow and precision landing
...
Includes slight restructuring to logic for other sensors but these should not have any functional effect
2016-08-31 13:59:16 +09:00
Andrew Tridgell
96de005591
Copter: moved MAV_TYPE define to defines.h
2016-08-25 10:16:20 +10:00
Andrew Tridgell
a14ff8ac77
Copter: fixes for Frsky_Telem API changes
2016-08-25 10:16:20 +10:00
floaledm
157db51b9d
Copter: make control_sensor vars available outside of send_extended_status1
2016-08-25 10:16:18 +10:00
Tom Pittenger
06b64000e1
Copter: move mavlink msg handling into library
2016-08-16 16:33:36 -07:00
Tom Pittenger
d04a5d58fd
Copter: decode correct ADSB packet
2016-08-16 16:33:36 -07:00
Tom Pittenger
dbdd86ad46
Copter: set SYS_STATUS and HB_Flag Guided bits when in AVOID_ADSB
2016-08-12 14:46:44 -07:00
Peter Barker
4371223738
Copter: add dataflash as a bit for the mavlink SYS_STATUS message
2016-08-11 17:48:44 -03:00
Randy Mackay
0ed5665193
Copter: change parameter order of guided_set_angle
...
I thought it might be slightly better to put the optional parameters at the end
No functional change
2016-08-10 10:03:54 +09:00
Allan Matthew
6dd4e1a2aa
Copter: accept yaw rate commands in Guided atttude controller
2016-08-10 10:03:37 +09:00
Randy Mackay
4e92f08bf1
Copter: only accept attitude targets in Guided mode
2016-08-02 18:26:04 +09:00
Randy Mackay
1161417d7f
Copter: add GUIDED_NOGPS flight mode
...
This mode is a cut down version of Guided mode that only accepts attitude commands.
This mode does not require a GPS lock
2016-08-02 18:25:59 +09:00
Lucas De Marchi
c0b49f6aeb
ArduCopter: Remove i2c lockup count
...
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
2016-07-28 18:03:09 -03:00
Randy Mackay
68899ed921
Copter: add adsb to failsafe structure and report in heartbeat to GCS
2016-07-25 20:24:37 +09:00
Randy Mackay
f4db4bdb08
Copter: GCS_MAVLink passes packets to AP_Avoidance
...
This allows treating GLOBAL_POSITION_INT packets from other vehicles in the same way as ADSB packets
2016-07-25 20:24:37 +09:00
Andrew Tridgell
387da40fc5
ArduCopter: adjust for 16 channels in SERVO_OUTPUT_RAW
2016-07-25 10:06:02 +10:00
Tom Pittenger
07a838937e
Copter: handle ADSB-Out packets
2016-07-22 13:38:37 -07:00
Andrew Tridgell
e943a48eba
Copter: added PLAY_TUNE message
2016-07-22 15:00:17 +10:00
Allan Matthew
860773260f
Copter: support GPS_INPUT mavlink message
2016-07-12 15:34:51 +09:00
Randy Mackay
52d81f630f
Copter: pass polygon fence mavlink messages to fence
2016-06-25 15:55:55 +09:00
Tom Pittenger
66d4caeeb0
Copter: add ADSB_streamrate
2016-06-19 11:24:33 -07:00
Tom Pittenger
b433250da5
Copter: sanity check gps latlng
2016-06-01 17:38:50 -07:00
Peter Barker
e977d85e0c
Copter: move telemetry_delayed up into base class
2016-05-31 08:46:09 +10:00
Peter Barker
3cf174c343
Copter: move adjust_rate_for_stream up
2016-05-29 19:38:49 +10:00
Peter Barker
bb19c57615
Copter: subclass GCS_MAVLink in place of defining its functions for it
2016-05-29 16:21:21 +10:00
Andrew Tridgell
a922b98ac0
Copter: use send_heartbeat wrapper
2016-05-21 15:25:18 +10:00
Andrew Tridgell
31866c66d8
Copter: always build with MAVLink2 headers
2016-05-21 15:25:15 +10:00
Andrew Tridgell
b85f129cc5
ArduCopter: handle SETUP_SIGNING message
2016-05-21 15:25:12 +10:00
Randy Mackay
7689315ba2
Copter: rename sonar to rangefinder
2016-05-21 10:36:53 +09:00
Randy Mackay
028946ae9e
Copter: rename CONFIG_SONAR to RANGEFINDER_ENABLE
2016-05-21 10:36:53 +09:00
Saloni Jain
bc22419286
Copter : Modified set_guided_destination() to reject requests for guided waypoints outside the fence.
2016-05-21 09:56:12 +09:00
Don Gagne
97d361333d
ArduCopter: SET_SENSORS_OFFSETS support for third compass
2016-05-19 18:51:17 -03:00
Andrew Tridgell
e4948544e7
Copter: cleanup unnecessarily complex gcs[] usage
2016-05-17 08:27:35 +10:00
Randy Mackay
0a2336a5a8
Copter: update solo-buttons to work with master
...
Change was due to addition of reason codes since PR was first submitted
2016-05-13 11:42:25 +09:00
Jonathan Challinger
67cd2bae08
Copter: implement SOLO_BTN commands
2016-05-13 11:42:25 +09:00
skyscraper
4980c8bc94
ArduCopter: RC_Channel refactor
...
More fixing up of RC_Channel change direct access to data members
to access via member functions.
2016-05-10 16:21:16 +10:00