Commit Graph

120 Commits

Author SHA1 Message Date
Andrew Tridgell b4ecc347d7 AP_HAL: always define HAL_WITH_UAVCAN on px4 2018-09-05 08:52:47 +10:00
Andrew Tridgell 55dfefb2d6 AP_HAL: added HAL_Semaphore_Recursive 2018-08-25 15:44:36 +10:00
Andrew Tridgell 0a73c3492d AP_HAL: support HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Lucas De Marchi 099eefee87 AP_HAL: Chibios: HAL_GPIO_PIN_SAFETY_IN implies HAL_HAVE_SAFETY_SWITCH 2018-08-02 13:15:02 -07:00
Lucas De Marchi 7f984f2700 AP_HAL: linux: disable safety switch
Linux boards don't really handle the safety switch.
2018-08-02 13:15:02 -07:00
Lucas De Marchi 2336d2214b AP_HAL: sitl: disable safety switch
sitl doesn't really handle the safety switch and it's actually disabled
by AP_FEATURE_SAFETY_BUTTON.
2018-08-02 13:15:02 -07:00
Andrew Tridgell 0fc6ca22f7 AP_HAL: setup HAL_I2C_INTERNAL_MASK for ChibiOS 2018-07-14 17:51:50 +10:00
Andrew Tridgell 4939f30ec4 AP_HAL: make linux internal i2c be 0xffff
based on feedback from Lucas
2018-07-10 15:39:47 +10:00
Andrew Tridgell b19219d636 HAL_Linux: allow for 16 I2C buses on Linux 2018-07-10 15:39:47 +10:00
Andrew Tridgell 281a1b6569 AP_HAL: added I2C bus mask functions and macros 2018-07-10 15:39:47 +10:00
Andrew Tridgell eb2c9dfe74 AP_HAL: define CHIBIOS_SHORT_BOARD_NAME if not defined 2018-06-29 20:27:36 +10:00
Michael du Breuil 2577e5ff25 AP_HAL: Don't always define GPIO pins, they may be connected to real
hardware
2018-06-27 15:25:44 +10:00
Lucas De Marchi 49d08ba72a Global: remove minlure
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.

It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
2018-06-26 07:32:08 -07:00
Peter Barker f5eb281efd AP_HAL: use AP_RTC
Also add a define as to whether set_time / get_time can be used
2018-06-15 08:01:22 +10:00
Eugene Shamaev c410feefa1 AP_HAL: add CAN bus declaration for the intel aero board 2018-05-25 13:53:17 +10:00
Lucas De Marchi a56106cccb AP_HAL: use buildsystem for default directories 2018-05-24 08:00:33 -07:00
Lucas De Marchi 1e7ad72909 AP_HAL: use default storage for more boards
Boards from Emlid, Erle Robotics and BBB-like ones were agreed to be
changed #7100. Here I'm also change some more, just because they appear
to be using the old default just because of copy and paste. We can
always revert back if we get complains and it seems something trivial.
Almost all boards now are using the the default path for logs, terrain
and params, except those that have restrictions to do so, like ones
using custom distros.
2018-05-24 08:00:33 -07:00
Eugene Shamaev 9a22e11b92 AP_HAL: HAL_RCINPUT_WITH_AP_RADIO definition
Remove moved skyviper-v2450-px4 definitions

Co-authored-by: Francisco Ferreira <OXINARF@users.noreply.github.com>
2018-05-22 08:35:01 +09:00
Francisco Ferreira 695d92ddbf AP_HAL: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
mirkix 76802740cb AP_HAL: fix PocketPilot HMC5843 I2C bus number 2018-05-12 07:16:50 +10:00
mirkix dfd2fb1841 AP_HAL: move BUZZER_PIN into AP_HAL 2018-05-10 17:48:25 +01:00
mirkix 8c36635a8c AP_HAL: LED GPIOs for final PocketPilot design 2018-05-09 16:16:42 -07:00
Lucas De Marchi b54b95de12 AP_HAL: minlure: search for specific I2C controller
The number can change from one kernel version to another and even from
one boot to another. Find the I2C controller on sysfs and stick to that,
like it's done for PCA9685.
2018-05-04 11:47:04 -07:00
Lucas De Marchi 4f2498947b AP_HAL_Linux: remove redundant ifdef
CONFIG_HAL_BOARD_SUBTYPE should be set in the boards header.
2018-05-04 11:42:55 -07:00
mirkix ee86418587 AP_HAL: change PocketPilot to final baro sensor 2018-05-04 08:00:49 +10:00
night-ghost 9f1e45509a support for Matek F405-CTR board, causes minor changes in I2C descriptor block 2018-04-26 07:51:06 +10:00
Andrew Tridgell 33a26ac0a8 AP_HAL: enable DEVO telemetry on F4Light 2018-04-24 10:44:28 +10:00
Andrew Tridgell 943e433be6 AP_HAL: added device name for bmp280 for ChibiOS 2018-04-12 11:50:44 +10:00
night-ghost 677fc1875b HAL_F4Light: some modes disabled by default 2018-04-11 10:13:08 +10:00
Andrew Tridgell a7711ab9f7 AP_HAL: don't require GPIO defines for RCOU serial on ChibiOS 2018-04-09 15:32:04 +10:00
Andrew Tridgell 74bf83c39f AP_HAL: added check for RCOUT serial support 2018-04-07 09:10:29 +10:00
Andrew Tridgell 7d3cce98d0 AP_HAL: allow override of MS5611 name
for fmuv4-beta
2018-04-07 09:10:29 +10:00
Alexey Bulatov 4d08ec8c85 AP_HAL: Edge: set storage directory to /edge/ardupilot 2018-04-04 09:29:16 +09:00
night-ghost 7fad79ca81 HAL_F4Light: fixed parameter's numbers for some boards 2018-03-09 11:15:12 -08:00
Andrew Tridgell 64bda71da5 AP_HAL: added generic ChibiOS board type 2018-03-02 12:52:50 +11:00
night-ghost b773334008 AP_HAL_F4Light: disable AP_Stats to reduce flash degradation 2018-03-02 07:23:35 +11:00
Andrew Tridgell 310acd333e AP_HAL: use 1/0 not HIGH/LOW for LEDs in ChibiOS 2018-02-14 18:27:00 +11:00
Andrew Tridgell ceeb5e6892 AP_HAL: use 1/0 not HIGH/LOW for LED polarity
this fixes the build for pixracerled driver on px4-v2
2018-02-14 18:27:00 +11:00
ljwang 59ee3c8f62 AP_HAL: support mini-pix 2018-02-14 18:27:00 +11:00
Tom Pittenger a2f1f63ab3 AP_HAL: add param defaults for EMLID_EDGE for GPS_TYPE=9 and CAN_DRIVER=1 2018-02-13 15:29:53 +11:00
Alexey Bulatov 8369f125ce AP_HAL: Edge: add define HAL_WITH_UAVCAN 2018-02-13 13:52:44 +11:00
murata 7be15cab45 AP_HAL: disable copter winch on f4light boards 2018-02-12 12:17:12 +09:00
mirkix 3aa211b325 AP_HAL: fix BeagleBone Blue external I2C number 2018-02-12 09:49:56 +09:00
night-ghost f8569ac39e AP_HAL: added F4Light HAL 2018-02-10 09:14:41 +11:00
Andrew Tridgell f8e16008f6 AP_HAL: updated cypress radio bus pins for skyviper 2018-02-08 18:56:51 +11:00
Peter Barker beb5a41389 AP_HAL: add radio defines for PixHawk
This facilitates testing a diret-attached-radio using a PixHawk1

The AUX5 pin is used as an interrupt line.
2018-02-08 17:36:33 +11:00
Siddharth Purohit 5bcbc4c142 AP_HAL: default to not UAVCAN support for chibios boards 2018-02-07 20:33:45 +11:00
Igor Anokhin 5cf15db966 AP_HAL: add LSM9DS1 defines
Add defines for name and number sensor
2018-02-06 09:31:26 -08:00
LukeMike bfcece7edd VRBRAIN / AP_HAL: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike dab8f93628 VRBRAIN / AP_HAL: changed vrbrain board configuration file 2018-02-05 08:26:49 +11:00