Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
24,326 Commits 71 Branches 509 Tags 742 MiB
Commit Graph

12449 Commits

Author SHA1 Message Date
Michael du Breuil 86c2b1d84a AP_GPS: u-blox Remove 5Hz warning 
The warnings test case is better covered by the rest of the driver
while it is performing the normal settings audit.
 2016-10-11 10:44:51 +11:00
Michael du Breuil 3e3f539a6a AP_GPS: Raise target baud of u-blox devices 
A knockon effect is that we need less config strings as raw logging
on u-blox will use the same baud rates
 2016-10-11 10:44:50 +11:00
floaledm 49e47fd679 AP_Frsky_Telem: airspeed scaling factor fix 2016-10-10 15:29:49 -07:00
Leonard Hall 0a56d69d54 AP_MotorsMulticopter: Use same throttle value used by motors 2016-10-10 16:40:08 +09:00
priseborough 5d09c78f34 AP_NavEKF2: Always perform optical flow takeoff check when receiving data 
A specialised takeoff check is now always performed when we receive new flow data as the default behaviour is to try and use flow data whenever it is received, rather than limit its use to a use to a flow-only mode of operation that had to be selected via user parameter.
 2016-10-10 14:49:48 +09:00
priseborough a75a383ef2 AP_NavEKF2: Update protection for out of focus flow data 2016-10-10 14:49:41 +09:00
priseborough 635826c056 AP_NavEKF2: Fix reporting of terrain estimator innovations 
Terrain height is relevant whenever optical flow data is present
 2016-10-10 14:49:35 +09:00
priseborough b0072b587c AP_NavEKF2: fix reporting of optical flow use status 2016-10-10 14:49:24 +09:00
priseborough ed9ecb28fb AP_NavEKF2: Enable entry into relative position mode on start-up 2016-10-10 14:49:21 +09:00
priseborough e0b8c54194 AP_NavEKF: Update GPS type parameter description 2016-10-10 14:49:18 +09:00
priseborough f9018fcc1b AP_NavEKF2: Enable simultaneous optical flow and GPS use 
Enables simultaneous use of GPS and optical flow data with automatic fallback to relative position mode if GPS is lost and automatic switch-up to absolute position status if GPS gained/re-gained.
 2016-10-10 14:49:02 +09:00
priseborough ab55991b33 AP_NavEKF2: Report position jumps due to lane switches 
Also moves code required to update reset data due to lane switches into separate functionscto improve readability.
 2016-10-10 11:56:14 +09:00
murata 36b5d43efb AC_Avoid: delete variable that is only used once in a simple calculation 2016-10-05 16:25:57 +09:00
Andrew Tridgell 2fab15dcd5 AP_TECS: added use_synthetic_airspeed() API 
used by quadplane during transitions
 2016-10-05 11:52:34 +11:00
Andy Little 0d113b265c Examples: fix examples for px4 
The change to use AP_BoardConfig messed up the examples. Here are some
updated but there are plenty more to do.
 2016-10-04 12:50:47 -03:00
Murilo Belluzzo 0b86532b5c Global: Remove '\r' character from all source code files 2016-10-03 22:13:27 -03:00
Julien Beraud 714c8fd318 AP_InertialSensor_MPU6000: Add support for fsync bit for Bebop 
Already present on Disco
 2016-10-03 12:20:03 -03:00
Andy Little 4b2eedac05 AP_HAL: Split the AP_HAL_Boards.h header into per board sub headers for legibility 2016-09-29 08:26:50 -03:00
Tom Pittenger 3adf8c3e51 AC_AttitudeControl: comment odd math in get_att_target_euler_cd 
degree(100) = 1 float multiplicaiton
vector3f * degree(100.0f)  = 4 float multiplications
degree(vector3f) * 100.0f  = 6 float multiplications and needs new degree(vector3f) function
degree(vector3f * 100.0f)  = 6 float multiplications and needs new degree(vector3f) function

These all come to the same conclusion but the one that is faster appears to be a bug but is mathematically correct.
 2016-09-27 17:04:53 -07:00
floaledm 602b81a4d7 AP_Frsky_Telem: add ekf_status check 2016-09-27 09:20:32 -07:00
floaledm 27e977289a AP_AHRS: add the get_variances method found in AP_AHRS_NavEKF to AP_AHRS 2016-09-27 09:20:32 -07:00
Peter Barker a10cde35f5 DataFlash: stop logging before filling SD card on PX4 
Filling the SD card causes NuttX to have conniptions, including
data loss and failure to boot
 2016-09-26 14:02:58 -07:00
Jonathan Challinger 25bee93fcc DataFlash: fix EKF5 message 2016-09-26 13:42:00 -07:00
Tom Pittenger 99d48d8bbd AP_FrSky_Telem: cleanup, non-functional change 2016-09-26 13:12:42 -07:00
floaledm fcfaa98bb6 AP_Frsky_Telem: reworked _statustext_queue.empty() check 2016-09-26 13:07:18 -07:00
Tom Pittenger 8001cc403b AP_Frsky_Telem: fix is_flying assignment 2016-09-26 13:00:33 -07:00
floaledm 5e022bf631 AP_Frsky_Telem: fix *_ap.value issue for Plane 
set_is_flying does operations on a nullptr, plus we loose the ability to
update ap_status accordingly for Plane
 2016-09-26 12:35:47 -05:00
Francisco Ferreira 42cd8e9721 AP_NavEKF2: Handle yaw jumps due to core switches 
Based on work from Paul Riseborough (priseborough)
 2016-09-25 18:24:11 -07:00
Francisco Ferreira 8da22e441b Revert 3 commits about yaw reset core switch 
Revert "AP_NavEKF2: Fix bug in published yaw reset value found during code review"
commit 175faf1e41.

Revert "AP_NavEKF2: use a struct for all yaw step class variables"
commit 77fad065d1.

Partially revert "AP_NavEKF2: Handle yaw jumps due to core switches"
commit 885bfd1b4e.
 2016-09-25 18:24:11 -07:00
floaledm ff0d0b1aa5 AP_Frsky_Telem: use ringbuffer for Frsky message queueing 2016-09-25 18:11:45 -07:00
murata d58c193c90 AP_RangeFinder: To define the OK status to LEDDARONE status. 2016-09-25 17:46:22 -07:00
Tom Pittenger b3d5375aa0 AP_Frsky_Telem: simplify init by assuming everything is nullptr 
- also always queue the firmware message regardless of protocol type
 2016-09-25 10:42:02 -07:00
Tom Pittenger 6991ca53b3 AP_Frsky_Telem: allow default arguments in init() to set things to nullptr 2016-09-25 10:42:02 -07:00
floaledm 94aa6c4cfb AP_Frsky_Telem: consolidate into a single frsky.init() 2016-09-25 10:42:02 -07:00
Michael du Breuil 9c4b3ec1e1 AP_GPS: Fix incorrect incrementing of last_baud rate 
This is a revert of 7c3b8dceb which tried to start at index 0 of the
array of baudrates, however because of the way last_baud is used
this lead to a GPS always being reported as being 1 index off which
lead to users getting reports of baud rates that their GPS wasn't
configured for

Also renames last_baud to be current_baud as that is how it's
actuallly used and should reduce future confusion

And fixed some tabs/vs space issues around where the last_baud rate
was incremented.
 2016-09-25 08:50:47 -07:00
Andrew Tridgell 36ea946cf5 AP_Compass: use board defined compass ofs max in calibrator 2016-09-23 10:53:00 +10:00
Andrew Tridgell e7656fb7ac AP_HAL: raise compass offset max again for Disco 
values of 1600 happen on Z axis
 2016-09-23 10:52:55 +10:00
Jonathan Challinger 17fb7dc88f AP_Compass: initialize offset before beginning sphere fit 2016-09-23 10:52:51 +10:00
Jonathan Challinger 419f1bc00e AP_Compass: change fixed point format for more range 2016-09-23 10:52:46 +10:00
Jonathan Challinger 0652d71a72 AP_Compass: correct wrapping behavior in conversion to fixed point 2016-09-23 10:52:44 +10:00
murata 3a1cd20f11 AP_RangeFinder: To move to the place that use the variable definition for the first time. 2016-09-22 08:41:21 +09:00
Tom Pittenger 8eb7a062c7 AP_Frsky_Telem: tiny text change in statusText 2016-09-21 16:11:04 -07:00
floaledm 9e0cfc81ea AP_Frsky_Telem: updated sensor_status messages according to what is found in Mission Planner 
added "NO RC Receiver" and "Bad Logging"
 2016-09-21 15:51:04 -07:00
floaledm 5125846ac0 AP_Frsky_Telem: Plane support 2016-09-21 12:12:37 -07:00
floaledm b2b6c88edf AP_Frsky_Telem: renamed vars and funcs for consistency/clarity 2016-09-21 11:32:21 -07:00
Andrew Tridgell 3eb8b5e99f HAL_Linux: added RCInput_Multi 
this allows for multiple RCInput methods on one board. On Disco it
combines RCInput_115200 with RCInput_SBUS
 2016-09-21 10:33:15 -03:00
Andrew Tridgell 5909552f67 HAL_Linux: added RCInput_115200 
this is a RCInput module for multiple R/C uart protocols running at
115200 baud 8-bit. We can decode multiple protocols in parallel with
this module, relying on frame timing and CRCs to get the right
protocol
 2016-09-21 10:33:15 -03:00
Andrew Tridgell 2edd914634 AP_HAL: added st24 R/C protocol decoder 
with thanks to the PX4 project
 2016-09-21 10:33:15 -03:00
Andrew Tridgell 9a7af89b30 AP_HAL: added sumd decoder 
with thanks to the PX4 project
 2016-09-21 10:33:15 -03:00
Andrew Tridgell e913b9a8f7 HAL_Linux: fixed incorrect include 2016-09-21 10:33:15 -03:00
Randy Mackay 2ebb81b02f AP_NavEKF2: switching compass message to GCS downgraded to INFO 2016-09-21 21:42:44 +09:00
Andrew Tridgell 79ed5c7091 AP_BattMonitor: fixed typo 2016-09-21 17:37:32 +10:00
Andrew Tridgell 06cccd6d3b AP_BattMonitor: update disco battery lookup table 2016-09-21 13:48:53 +10:00
Tom Pittenger 5512b6de02 AP_RangeFinder: Cleanup and added comments 
- uart->available(); returns uint32 but was stored locally as int32 and treated as uint32. Now stored correctly as uint32
- some variables were set to zero at start of function, then reset to zero before being used. wasted work
 2016-09-21 10:45:25 +09:00
Tom Pittenger e928e20b11 AP_RangeFinder: Ensure no divide by zeros in LeddarOne 
Having a critical divide by value as a class member that could change external to the function using it is fragile. It was not very obvious that a divide by zero was not possible in the current design, now it's very obvious and safer in case the code changes later.
 2016-09-21 10:45:23 +09:00
priseborough b6867e085d AP_NavEKF2: Don't report range finder variance on mavlink if not required 2016-09-21 10:41:21 +09:00
Andrew Tridgell 95db9f61cc AP_Module: added velocity_ned to AHRS state 2016-09-20 17:34:39 +10:00
Michael Oborne 11c376588d AP_GPS_NOVA: support tersus/novatel/comnav gps 2016-09-20 10:53:49 +10:00
Peter Barker 8f376944aa DataFlash: immediately restart logging after erasing logs 2016-09-19 17:57:59 +09:00
Randy Mackay f94f7e2aa0 AP_RangeFinder: add leddarone to TYPE parameter description 
No functional change
 2016-09-19 14:35:41 +09:00
ShingoMatsuura 3123bd6d7d AP_RangeFinder: add LeddarOne support 2016-09-19 13:25:35 +09:00
Andrew Tridgell c275e7c61d SITL: added SIM_SPEEDUP parameter 
allows changing speed of simulation while running
 2016-09-19 07:45:24 +10:00
murata 13fe8cb4d0 AP_OpticalFlow: Changed short boundary the i2c_integral_frame. 2016-09-17 01:04:06 -03:00
Matthew Brener 06388b0417 Global: Fix typos 2016-09-17 00:36:36 -03:00
Andrew Tridgell a4c1bc3fd3 HAL_Linux: avoiding setting the SPI mode on every transfer 
This was causing the Disco kernel to print a debug message on every
SPI transfer, which makes for a very noisy kernel and large kernel logs
 2016-09-17 00:35:00 -03:00
Andrew Tridgell 52caf8419e SITL: fixed sense of wind direction 
wind direction is where wind is coming from, not going to
 2016-09-16 10:59:27 +10:00
Andrew Tridgell 66073413a8 GCS_MAVLink: announce MAVLink2 capability 2016-09-16 09:47:55 +10:00
Andrew Tridgell 8f35305496 SITL: added a simpler compass cal simulation 
just output 1250 to servo5 and it will go through lots of rotations
 2016-09-16 08:59:43 +10:00
Andrew Tridgell f82827ce79 AP_Compass: removed disco special compass offsets 
not needed any more with newer hardware
 2016-09-14 19:06:06 +10:00
Andrew Tridgell bb65f4df76 AP_Arming: use HAL defined compass offset max if available 2016-09-14 11:53:13 +10:00
Andrew Tridgell bf67d4277d AP_HAL: define a larger compass offset max for Disco 2016-09-14 11:52:55 +10:00
Randy Mackay ba5db0c5d8 Compass: add CAL_FIT parameter description values 
No functional change
 2016-09-14 09:57:52 +09:00
priseborough cb1d3c7ed2 AP_NavEKF2: Allow for terrain gradient when using range finder for height 2016-09-13 17:45:03 +09:00
priseborough 60d8adcca0 AP_NavEKF2: Fix height drift on ground using range finder without GPS 2016-09-13 17:44:59 +09:00
priseborough 8797714203 AP_NavEKF2: Fix bug in handling of invalid range finder data 2016-09-13 17:44:43 +09:00
priseborough 175faf1e41 AP_NavEKF2: Fix bug in published yaw reset value found during code review 2016-09-13 17:35:18 +09:00
priseborough 77fad065d1 AP_NavEKF2: use a struct for all yaw step class variables 2016-09-13 17:35:16 +09:00
priseborough 885bfd1b4e AP_NavEKF2: Handle yaw jumps due to core switches 2016-09-13 17:35:14 +09:00
murata c78dfd4aa4 AC_Sprayer: Change the comment of the variables in the form of doxygen. 2016-09-13 13:37:35 +09:00
Peter Barker fce798bc7a DataFlash: avoid integer underflow 
Thanks to mbelluzzo: f44b1b3556
 2016-09-13 13:32:09 +09:00
Peter Barker 95d4475d45 DataFlash: avoid time going backwards in logs 
WriteBlockCheckStartupMessages returned true if finished writing out
all startup messages.  However, that may have allowed the caller to
then write out their message - but the timestamp on that message would
almost certainly be lower than the messages we've just written out.
 2016-09-13 13:32:06 +09:00
William Liu cc28c8e6ee AP_Airspeed: AP_Airspeed_I2C: get the right status according to datasheet 2016-09-09 10:32:14 -07:00
William Liu b1a62d6c8e AP_HAL_Linux: RCOutput_Bebop: fixed potential deadlock 2016-09-09 09:59:17 -07:00
Andrew Tridgell aa4cde1aae AP_BoardConfig: work around issues with bad components on some FMUv4 boards 
some pixracer copies have poor components which can cause sensor bus
brownout on boot. This resets the sensor bus for 20ms on boot to try
to get clean sensor startup
 2016-09-08 13:18:13 +10:00
Benoit Tran 9b89b4f561 AP_HAL: Correct HAL_PARAM_DEFAULTS_PATH for Parrot Disco 2016-09-08 13:05:25 +10:00
Randy Mackay b63666d188 AP_Motors: increase MOT_THST_HOVER parameter description range 
No functional change
 2016-09-07 15:28:49 +09:00
Niti Rohilla cadd95fdd8 GCS_MAVLink: Added sanity check for DO_JUMP command on mission load. 2016-09-06 00:40:47 -07:00
floaledm 4d03be94cf AP_Frsky_Telem: removed reliance on home_distance and home_bearing which are only in copter 2016-09-06 11:42:32 +10:00
floaledm 33bd359463 AP_Frsky_Telem: LANDCOMPLETE switched to to ISFLYING flag 2016-09-06 11:23:29 +10:00
floaledm 4dc98faa48 AP_Frsky_Telem: transmit airspeed instead of groundspeed, if available 2016-09-06 11:15:11 +10:00
floaledm 8deba69715 AP_Frsky_Telem: added 1 to control_mode passed on Frsky link 2016-09-06 11:14:48 +10:00
floaledm 4f8cea6844 AP_Frsky_Telem: simplified constructor 2016-09-06 11:14:48 +10:00
Michael du Breuil 7a18d59099 GCS_MAVLink: On mission_set_current report the requested item if the set was a success 
The problem with reporting the mission index, is that the mission index will be walked
forward until its referring to a nav target, which means that if a DO_ command was
requested, the requesting mavlink device had no way to validate the command was
accepted, it would have to make a infrence from it's copy of the mission
 2016-09-06 08:55:04 +10:00
Leonard Hall fdcdcb0033 AC_PosControl: check Z-axis accel imax can always overpower hover throttle 
This removes the possibility of the vehicle constantly climbing if the hover throttle becomes a very large value
 2016-09-05 14:19:43 +09:00
Andrew Tridgell aafd1512e4 HAL_PX4: limit IMU target temperature to 65 2016-09-05 12:59:50 +10:00
Andrew Tridgell c0d21c5730 AP_Module: added gyro_bias to AHRS structure 2016-09-05 12:56:52 +10:00
Andrew Tridgell 334db0a1a5 AP_AHRS: added get_primary_accel_index() and get_primary_gyro_index() 2016-09-05 12:56:36 +10:00
Andrew Tridgell 902daff3a3 AP_Module: added FSYNC state to raw accel report 2016-09-05 12:55:52 +10:00
Andrew Tridgell 6f9530ebaa AP_InertialSensor: added optional FSYNC external sync bit 
used to synchronise with image sensor on Disco
 2016-09-05 12:55:32 +10:00
Andrew Tridgell c62fc336cb AP_AHRS: use current EKF2 IMU core in gyro estimate 
The EKF2 implementation uses one IMU per EKF2 core. When reporting the
gyro estimate, accel_ef estimate and gyro bias estimate we need to use
the values associated with the current IMU index being used by the
current EKF2 core. Otherwise we will have an inconsistency between the
gyro estimate and attitude estimate

This affects all multi-IMU systems using EKF2
 2016-09-05 12:54:53 +10:00
Andrew Tridgell dd812cfc0c AP_NavEKF2: added getPrimaryCoreIMUIndex() 
needed for correct AHRS gyro estimate
 2016-09-05 12:53:53 +10:00
Andrew Tridgell cfd7268bd5 GCS_MAVLink: check the signing key magic on load 
or we end up with a bad key when MAVLink2 is first enabled
 2016-09-04 19:28:48 +10:00
Andrew Tridgell b9c4a948d1 AP_BoardConfig: fixed startup ordering change in canbus vs external mag 2016-09-04 18:48:26 +10:00
Gustavo Jose de Sousa 5c5ddc9d4a AP_HAL: reformat AP_HAL_Boards.h 
The definitions for each board haven't been reformatted here. They need a
little more thinking on how to format them in order to provide better
readability.
 2016-09-03 01:03:17 -03:00
José Roberto de Souza 13287f61e3 AP_Compass: Make COMPASS_AERO probe BMM150 2016-09-03 01:03:17 -03:00
Gustavo Jose de Sousa 68fe536da3 AP_InertialSensor: use BMI160 for Intel Aero 2016-09-03 01:03:07 -03:00
Gustavo Jose de Sousa 025082b280 AP_HAL_Linux: add port to Intel Aero 
Contributions from:
 - Gustavo Jose de Sousa <gustavo.sousa@intel.com>
 - José Roberto de Souza <jose.souza@intel.com>
 - Lucas De Marchi <lucas.demarchi@intel.com>
 - Patrick J.P <patrick.pereira@intel.com>
 2016-09-03 01:03:07 -03:00
José Roberto de Souza 0b0be31a29 AP_HAL: add defines for Intel Aero 2016-09-03 01:03:07 -03:00
Gustavo Jose de Sousa b6c0e11200 AP_InertialSensor: BMI160: convert it to use Device periodic callback 
Some notes:
 - The only place that made sense to use
   suspend_timer_procs()/resume_timer_procs() calls were where we registered
   the timer process. Now there's no need for that anymore. Remove those calls
   from other place in the source too.
 - There's no need to acquire the device lock now that we are running as a
   periodic callback.
 2016-09-03 01:03:07 -03:00
Gustavo Jose de Sousa b259356703 AP_Compass: BMM150: convert it to use Device periodic callback 2016-09-03 01:03:07 -03:00
Lucas De Marchi 667fca60f5 AP_Compass: BMM150: reduce lock region 
Use a semaphore to update the accumulated values instead of using the
timer semaphore.
 2016-09-03 01:03:07 -03:00
Patrick J.P c32dc3bc37 AP_HAL_Linux: Add AeroIO communication module 
Signed-off-by: Patrick J.P <patrick.pereira@intel.com>
 2016-09-03 01:03:07 -03:00
Randy Mackay 4858afae6c AP_Motors: param description update that MOT_SPIN_MIN should be higher than MOT_SPIN_ARM 2016-09-03 11:12:31 +09:00
Andrew Tridgell bf1e0e1536 AP_AHRS: fixed EKF GPS arming check for fixed wing 
when in a quadplane mode we set fly_forward to zero. We need to ensure
the GPS checks for EKF health are applied when doing arming checks, so
we use the checks always when disarmed
 2016-09-02 11:12:19 +10:00
Andrew Tridgell 232347569f AP_RPM: use RPM_SCALING in SITL 
useful for testing low RPM warning in a GCS
 2016-09-02 11:12:18 +10:00
Andrew Tridgell acbeb29fbe AP_Frsky_Telem: use const references where possible 
save some stack space
 2016-09-02 11:12:18 +10:00
Randy Mackay 44830be172 AC_AttControl: add parameter check of throttle mix 2016-09-02 09:27:15 +09:00
Randy Mackay 535158e0d8 AC_AttControl: move var_info declaration 
No functional change
 2016-09-02 09:27:12 +09:00
Randy Mackay 38b3d3ff3a AP_GPS_MAV: initialise location while handling_msg 
This reduces a covarity warning but it likely not really an issue because we always initialise newly allocated memory to zero anyway
 2016-09-01 12:01:14 +09:00
murata 59796aaf9c AP_OpticalFlow: The first value of the register to the value of the definition. 2016-08-31 01:01:59 -03:00
Ralf Ramsauer 71212942da AP_HAL: AP_HAL_Linux: align I2CDevice::read_registers_multiple() 
25c7e8b changed the logic of transfer(). Align
I2CDevice::read_registers_multiple() in the same way.

Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
 2016-08-31 00:18:50 -03:00
Randy Mackay e7020b218a AC_Fence: revert param Enable to be FLAG_ENABLE 
This reverts commit 5e811b8463.
 2016-08-31 08:55:31 +09:00
Ralf Ramsauer 5b81920737 AP_HAL: AP_HAL_Linux: add comment to I2CDevice::transfer() 
If I2CDevice::transfer() has to do nothing it returns false. This can be
misleading, as this might feel contradictory.

Let's spend a comment on that.

Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
 2016-08-29 15:20:14 -03:00
Ralf Ramsauer 25c7e8bf60 AP_HAL: AP_HAL_Linux: perfect I2CDevice::transfer() 
According to man 3 ioctl, ioctl returns other values than -1 on success.
So loop while ioctl returns -1.

Furthermore, there is no necessity to initialise r with -EINVAL,

Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
 2016-08-29 15:20:14 -03:00
Matt 9eca21c26a AP_Compass: Removed duplicate code 2016-08-29 10:38:41 -03:00
Lucas De Marchi 833f565f09 AP_HAL_Linux: prefix threads with ap 
This makes it consistent with bus threads and easier to grep from a `ps`
call.
 2016-08-29 10:27:36 -03:00
Lucas De Marchi e1ab44f4a3 Global: remove get_fd() from Device API 
This was there for compatibility with I2CDriver and SPIDriver. We don't
use them anymore so we can remove the compat method.
 2016-08-29 10:27:36 -03:00
Lucas De Marchi ead01855df AP_HAL: remove default params for minlure 
We are currently not using them.
 2016-08-29 10:27:36 -03:00
Andrew Tridgell e9e3a3f491 AP_Motors: added get_pwm_type() 2016-08-29 15:52:21 +10:00
Peter Barker fd87a4f180 DataFlash: fix unused result warning 2016-08-25 15:53:47 +10:00
Andrew Tridgell a4ca4dbd9e AP_FrSky_Telem: use a constant string for firmware version 2016-08-25 11:00:17 +10:00
Andrew Tridgell 62388fc991 AP_FrSky_Telem: use constant strings in message queueing 2016-08-25 10:29:57 +10:00
Andrew Tridgell 183283ba07 AP_FrSky_Telem: make _msg non-static 
there are no calls to this from outside the library. If we do add some
then we can change the API as needed
 2016-08-25 10:23:03 +10:00
floaledm 2f54e67996 AP_FrSky_Telem: fixed sending last message chunk 
Was sent only once, now sent 3 times (as planned)
 2016-08-25 10:16:20 +10:00
Andrew Tridgell 185ef73684 AP_Frsky_Telem: fixed usage of sensor error bits 
using these asyncronously via pointers is error prone as the updates
to these masks is not atomic relative to the IO callback in
AP_Frsky_Telem
 2016-08-25 10:16:19 +10:00
Andrew Tridgell f4d59d720a AP_FrSky_Telem: removed use of pointer to control_mode 
it is an enum, and it is invalid to take a pointer to an enum as a
uint8_t*
 2016-08-25 10:16:19 +10:00
Andrew Tridgell ab77fdfa02 AP_FrSky_Telem: removed dependency on inertialnav 
the AP_InertialNav library is deprecated in favor of AP_AHRS. We
should not introduce a new dependency on it
 2016-08-25 10:16:19 +10:00
floaledm b71e0d73b9 AP_FrSky_Telem: added SPort passthrough protocol 2016-08-25 10:16:19 +10:00
floaledm 50eecf58a4 AP_SerialManager: added SPort passthrough protocol 2016-08-25 10:16:18 +10:00
floaledm ec157bd4c2 AP_BattMonitor: Get pack_capacity_mah function 2016-08-25 10:16:18 +10:00
floaledm a9b01b470c AP_FrSky_Telem: cosmetic changes 2016-08-25 10:16:17 +10:00
floaledm 5066a5bc73 AP_SerialManager: syntax and minor lib rework 2016-08-25 10:16:17 +10:00
floaledm de2a7013b4 AP_FrSky: simplified lib rework 2016-08-25 10:16:17 +10:00
Leandro Pereira bf3f8c05e7 GCS_Mavlink: Correctly check if a channel is streaming 
In GCS_MAVLINK::stream_trigger(), chan_is_streaming would be checked
with a bitwise OR, instead of a bitwise AND.  This way, the condition
would always be true if chan_is_streaming were to be non-zero.
 2016-08-24 10:47:12 -03:00
Andrew Tridgell 3aba0d8359 SITL: fixed rover altitude 
thanks to Grant for noticing this
 2016-08-24 13:29:45 +10:00
mirkix a4d0ad8571 AP_InertialSensor: Fix name of sensor 2016-08-23 11:25:59 +09:00
Andrew Tridgell 25f1dbd8c2 HAL_SITL: allowed SITL to reopen uart connections 2016-08-23 09:30:17 +10:00
Andrew Tridgell 49b82b767f SITL: added RPM for heli sim 2016-08-23 09:30:14 +10:00
Andrew Tridgell c87fa13e77 AC_WPNav: added WP_RFND_USE parameter 
allows disable of rangefinder use for terrain following
 2016-08-23 09:27:39 +10:00
Tom Pittenger 330c63b010 AP_Avoidance: handle condition where avoid is disabled while avoiding 2016-08-17 22:38:54 -07:00