Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,049 Commits 71 Branches 509 Tags 731 MiB
Commit Graph

1483 Commits

Author SHA1 Message Date
Andrew Tridgell 502fbf6e17 AP_Math: added a safe_asin() function 
this adds range checking to asin()
 2012-02-24 11:52:55 +11:00
Andrew Tridgell 17170da96e AP_Math: added is_nan() methods to vector3f and matrix3f 2012-02-24 11:52:55 +11:00
Jason Short b094f6ce52 added set integrator 2012-02-23 09:38:08 -08:00
Andrew Tridgell ef90f336d3 DCM: changed the sense of floating point range comparison 
This allows us to detect NaN, otherwise NaN values were considered 
'in range'
 2012-02-23 11:41:26 +11:00
Andrew Tridgell 57ffd00b69 DCM: range check the matrix before calculating pitch 
The asin() in the pitch calculation can only take values between -1
and 1. This change ensures that the value is in range, and if it isn't
then we force a normalization. If that fails we reset the matrix
 2012-02-23 08:16:08 +11:00
Andrew Tridgell 2bb58db3f7 DCM: reset more values on renorm blowup 
when DCM blows up, we need to reset a lot more variables to ensure
that any NaN values don't persist
 2012-02-23 08:16:08 +11:00
Andrew Tridgell 156d98cb9f DCM: remove the taylor expansion optimisation for renormalisation 
The sqrt() costs about 44usec on a 2560, which is small enough for us
not to worry about the speed.

This also changes the range of values where we declare a blowup to
much less likely, which means we can cope with larger delta_t glitches
 2012-02-23 08:16:08 +11:00
Andrew Tridgell 53b87229ff AP_Param: added ParamToken type for variable list traversal 2012-02-19 17:05:28 +11:00
Jason Short 1e37a0ec17 added a limit to range output 2012-02-18 21:08:17 -08:00
Randy Mackay 33aa6fe13b Optflow - added reference to FastSerial to resolve compile error on Arduino 1.0. 
also removed reference to DCM (no longer required) and removed some old code.
 2012-02-18 18:09:40 +09:00
Andrew Tridgell 9793d04ed1 SITL: increase the amount of noise in the simulated ADC 
this increases the noise to 2 bits, which actually can have the effect
of improving accuracy, as it leads to better averaging
 2012-02-18 19:27:15 +11:00
Andrew Tridgell d52cb7e574 DCM: only add in centripetal accel if we have GPS lock 
if we don't have a GPS or the GPS doesn't have a good lock then we
can't rely on the ground speed for adjusting the acceleration vector
 2012-02-18 19:27:15 +11:00
Andrew Tridgell baac883eb1 IMU: move _sensor_cal to general IMU class 
this makes it available both in shim and INS subclasses
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 882cd4ea83 AP_Param: moved AP_Vector3f and AP_Matrix3f declarations to AP_Math.h 
this avoids us needing AP_Math.h in every utility sketch and example
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 4b15b63d21 AP_Param: fixed copy-assignment operators for AP_Param vectors 2012-02-18 10:51:57 +11:00
Andrew Tridgell 7f3858cb7f AP_Param: added a set_and_save_ifchanged() method 
this can be used to avoid the scan() in more frequenctly saved
variables, such as the MAVLink stream rates in APM
 2012-02-18 10:51:57 +11:00
Andrew Tridgell 80a6773b8b AP_Param: added an initialised() method 
this will be used by the compass code
 2012-02-18 10:51:57 +11:00
justinbeech 62b104cbfa Found free extra 256 bytes of RAM eliminate _clz use from libgcc 
Believe it or not, changing / 2^31 to >>31 saved 256 bytes in the "d" segment.

The reason is that GCC version prior to 4.3.5 does not have a count_leading_zeros (clz) assembler macro, so it uses a 256 byte lookup table called _clz
The _clz table gets pulled in if you do 64 bit division.
This tiny change is the only place that we do long long division.
Changing to a shift saves 256 bytes of ram.
 2012-02-17 09:46:05 +00:00
Jason Short 24ce02c6a4 made I term return in same pattern as D term 2012-02-16 22:09:22 -08:00
Andrew Tridgell 79d622939a ADC: on channel overflow we should not zero last_ch6_micros 
this happens every 64 seconds because of unused channels on the
ADC. Zeroing this creates a bad delta_t value for the DCM code.
 2012-02-16 17:48:36 +11:00
Jason Short 026e4a6567 change constant to float 44330.0 2012-02-15 09:10:14 -08:00
Michael Oborne 2f81776b0d eedump ap param in perl 2012-02-15 21:31:58 +08:00
Andrew Tridgell a48a118128 SITL: adjust the SITL compass code to have saner z values 2012-02-15 22:34:16 +11:00
Andrew Tridgell 62326c0f72 Compass: enable compass offsets for HIL compass 
this makes the null_offsets algorithm have an effect for the HIL
compass that is used for SITL, which makes for easier testing of
compass calibration
 2012-02-15 22:33:50 +11:00
Andrew Tridgell 048aed5427 fixed dump size 2012-02-15 10:44:09 +11:00
Andrew Tridgell 089db43183 show group_element too 2012-02-15 10:42:21 +11:00
Andrew Tridgell ea6a46fc9b AP_Param: added eeprom_aaparam.c dump utility 2012-02-15 10:41:06 +11:00
Andrew Tridgell 4398171374 SITL: catch floating point errors 
if we get a FPE then log a message and exit
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 245d265c6a DCM: added a SITL_debug() for DCM normalisation errors 
I have seen normalisation errors during simulation runs, but have not
yet tracked down the cause. This log message may help track things
down.
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 601a991a46 added SITL_debug() macro 
this can be used to print a message into the logs in the SITL
simulator. This will be used for critical conditions.
 2012-02-15 08:50:45 +11:00
Andrew Tridgell 085cc00c33 RC_Channel_aux: fixed a uninitialied variable error, and save a bit of stack space 2012-02-15 08:50:45 +11:00
Andrew Tridgell 43c56be70c SITL: add some magnetometer offsets 
this ensures the compass null_offset algorithm has some work to do in
autotest
 2012-02-14 11:26:42 +11:00
Andrew Tridgell f95d7cadc5 fixed SITL GPS heading to be 0..360 2012-02-14 11:26:42 +11:00
Andrew Tridgell 6a42598ade use stdint types in the compass code 2012-02-14 08:35:03 +11:00
Andrew Tridgell be5ffdedbb AP_Param: allow dumping of AP_Vector3f 
this means the 'show' command in the CLI shows the compass offsets now
 2012-02-14 08:34:50 +11:00
Andrew Tridgell d90dc4d893 GPS: change back to 4Hz for MTK GPS 
this will hopefully fix the NO_GPS problems that have been regularly
happening in recent months. I will watch the logs carefully to see if
the problem recurs
 2012-02-13 22:50:20 +11:00
Andrew Tridgell 804332c340 AP_Baro: fixed some signed/unsigned warnings 
and a potential bug on timer wrap
 2012-02-13 21:39:18 +11:00
Andrew Tridgell 74bbc72b11 move AP_Var code and example into libraries/AP_Var 
you can use AP_Var by defining USE_AP_VAR
 2012-02-13 16:22:53 +11:00
Andrew Tridgell 23ed5c2cee fixed imax load/save in PID 2012-02-13 16:22:53 +11:00
Andrew Tridgell 37cabb4cfa fixed dead zone load/save 2012-02-13 16:22:53 +11:00
Andrew Tridgell 150a67c262 fixed PID initialisation 2012-02-13 16:22:53 +11:00
Andrew Tridgell 47807ec68d RC_Channel_aux: catch invalid function settings 
a bad function setting would overwrite the heap
 2012-02-13 16:22:53 +11:00
Andrew Tridgell 1f05e7dafb fixed types in GPS detect code 
using int everywhere is wasteful and non-portable
 2012-02-13 16:22:53 +11:00
Andrew Tridgell d55a0c3a71 added AP_Param::show_all() 
this moves the logic into common code
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 9175ebe33a change back to 256 max variables in _var_info[] 
this keeps the header to 24 bits, and allows the token to be 16
bits. If we need more variables we can put them in a nested group.
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 9c5a5473ab added indexes to group info structures 2012-02-13 16:22:52 +11:00
Andrew Tridgell f2a6a31645 AP_Param: added group idx, and change packing of header elements 
adding a idx element to the GroupInfo will make it less likely that a
developer will change the IDs of group elements, and make it easier to
see that these IDs are important for identifying a variable in EEPROM

The header packing has changed to make it 24 bits on all platforms,
which allows us to lower the EEPROM variable max size to 1024 bytes
again
 2012-02-13 16:22:52 +11:00
Andrew Tridgell 678a1df3be fixed support for AP_PARAM_SPARE 
spare group elements are needed if we remove a group parameter
 2012-02-13 16:22:52 +11:00
Andrew Tridgell accaf9bb30 fixed build on arduino 1.0 2012-02-13 16:22:52 +11:00
Andrew Tridgell db96303fa0 convert APM_PI library to AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell 452749149f convert AC_PID library to AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell f9eed9bd9e fixed missing return in D value 2012-02-13 16:22:52 +11:00
Andrew Tridgell f760b3c717 restore _fCut that was lost in AP_Param development 2012-02-13 16:22:51 +11:00
Andrew Tridgell 84aef17bb0 fixed initialisation of RC_Channel class 2012-02-13 16:22:51 +11:00
Andrew Tridgell 5418302b38 AP_Param: fixed desktop build 2012-02-13 16:22:51 +11:00
Andrew Tridgell d658bc6f9d desktop: more progmem string functions 2012-02-13 16:22:51 +11:00
Andrew Tridgell 95e107ab75 AP_Param: added generic cast_to_float 2012-02-13 16:22:51 +11:00
Andrew Tridgell 9509c69f42 AP_Param: disable debug ready for production 2012-02-13 16:22:51 +11:00
Andrew Tridgell 5d03f13aa5 AP_Param: make ptype in first() and next() optional 2012-02-13 16:22:51 +11:00
Andrew Tridgell e01af5885f adapt Mavlink_compat.h to AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell bf4a77da81 convert libraries to new typesafe macros 2012-02-13 16:22:51 +11:00
Andrew Tridgell e8c4ecf9fa added nested group support and validation 2012-02-13 16:22:51 +11:00
Andrew Tridgell 94a86204ee added size of Vector6f 2012-02-13 16:22:51 +11:00
Andrew Tridgell 12dac42174 modify RC_Channel for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell e5a0074312 modify the PID library for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell e5f3864f81 modify the IMU code for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell 8c58d95187 modify the compass code for AP_Param 2012-02-13 16:22:51 +11:00
Andrew Tridgell 497a400841 hacks to get AP_Param to compile 2012-02-13 16:22:50 +11:00
Andrew Tridgell 5b842a447f new AP_Param subsystem 2012-02-13 16:22:50 +11:00
justinbeech 69f1613f2c Uncommented cold temp compensation after testing. Fixed read throttle so read rate ends up nailing 100hz, not 90hz. minor commenting improvements. 2012-02-13 00:00:06 +00:00
analoguedevices 0ea6ecf8d1 Removed outdated comment: 
"	// deadzone moved to
		//control_in = (abs(control_in) < _dead_zone) ? 0 : control_in;"
 2012-02-11 16:51:02 +00:00
Michael Oborne 8ec192cf45 fix uint > int issue - for hil 2012-02-11 11:35:59 +08:00
Pat Hickey 83326a9d62 APM_RC_APM2: Add support for CH_10 and CH_11 
* CH_10 is on APM2 pin A10 (based on A1..A8 convention)
* CH_11 is on APM2 pin A11

* Only the code in enable_out, disable_out, and OutputCh needed to change.

* CH_10 and CH_11 always have an output period of 20ms (50Hz).
 2012-02-06 22:11:01 -08:00
Randy Mackay 6877b8b3d6 AC_PID Library - added example sketch 2012-02-05 17:35:15 +09:00
Randy Mackay 90b39609c6 APM_PerfMon - removed because it's too big to use with our limited memory now anyway! I have a backup in case we need to resurrect it in the future. 2012-02-05 11:11:59 +09:00
Jason Short af79eb273f Added D term to APM_PI - need to refactor this as a parent class and two child classes to save code space, remove dupes 2012-01-28 21:21:43 -08:00
Randy Mackay 9c26e2369e Arduino 1.0 - GPS_IMU - small fix to make it compile. Does anyone use this lib?! 2012-01-28 17:56:56 +09:00
Randy Mackay 8533aaf5d9 AP_PID, AP_RC_Channel, FastSerial - small changes to make example sketches compile again 2012-01-28 17:54:20 +09:00
Randy Mackay b7ce7bfe18 Arduino 1.0 - small fix to make AP_Baro_MS5611_test.pde compile under Arduino 1.0 2012-01-28 13:21:35 +09:00
Randy Mackay cf25bbfa74 AP_ADC library - tiny fix to make example sketch work after some changes to AP_PeriodicProcess library 2012-01-28 13:12:19 +09:00
Randy Mackay ed19c25a97 Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h". 
Modified FastSerial's write function to return size_t (number of bytes written).
 2012-01-28 12:25:47 +09:00
Randy Mackay a8b3d2f063 OpticalFlow - fixed minor compiler warnings and moved chip select to A3 for APM2 2012-01-26 23:35:49 +09:00
Randy Mackay 8dee001657 Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Randy Mackay 99506accf4 Optical Flow - added overflow check 2012-01-25 21:45:52 +09:00
Pat Hickey 9195006541 APM_RC examples: add calls to enable_out after init 2012-01-24 09:09:08 -08:00
Andrew Tridgell 9c1e257826 fixed example in PID library 2012-01-23 08:47:46 +11:00
Pat Hickey 602d56304a APM_RC: PWM outputs are disabled by default on init 2012-01-22 12:03:11 -08:00
Pat Hickey 276913a950 APM_RC enable_out and disable_out added to APM1 and APM2 
* Outputs still enabled by default
 2012-01-22 12:03:11 -08:00
Jason Short 94e7ba8df2 Removed Gyro filter, In the end it doesn't help and I think it could actually hurt gyro integration. 2012-01-20 22:52:29 -08:00
Michael Oborne 6b949511ca change rc norm_output to scale evenly across the entire range 2012-01-20 16:24:55 +08:00
Andrew Tridgell 0dc0d9ddf0 added a simple DCM library example 2012-01-18 21:25:19 +11:00
Andrew Tridgell 1f43cf6579 fixed Oilpan test for new library structure 2012-01-18 20:31:58 +11:00
Doug Weibel e22a83eec0 Add a CLI setup action to reset the magnetometer offsets 
Since the magnetometer offsets are not available through the MAVLink parameter interface (since they are an AP_Var vector) this little feature allows them to be reset from the CLI.  Useful if you somehow get bad offsets or if you change magnetometer.  If you have a bad set of large offset values I have seen issues with the nulling algorithm have trouble converging to the proper values.  I have never seen it have trouble converging from 0/0/0, so this could be a useful feature from time to time.
 2012-01-15 16:15:08 -07:00
Mike Smith 9c5a776456 Teach the Makefile about the new Arduino sourcefile suffix 2012-01-15 11:51:38 -08:00
Jason Short 69ffc7e115 updated channel notes 2012-01-15 10:24:15 -08:00
Andrew Tridgell 897d9a1c0b baro: fixed an integer overflow issue at high altitudes 
the averaging array was using 16 bit numbers, but we are storing
numbers with 19 significant bits. That caused overflow at high
altitude, and some very interesting altitude graphs!

Thanks to Michael Oborne for spotting this in a log
 2012-01-14 19:51:35 +11:00
Randy Mackay bcd63a9807 OpticalFlow - bug fix - highest resolution was incorrectly set as 1200 instead of 1600 2012-01-14 12:34:29 +09:00
Andrew Tridgell 15d446bde2 DCM: prevent a segmentation fault when compass is not enabled 
when compass is disabled _compass is NULL
 2012-01-13 15:48:07 +11:00
Doug Weibel 9846822748 Bug fix for compass. 
This is a fix for an interesting bug when a DCM matrix reset was added to the ground start.  This bug only showed up if (A) a ground start were performed after an air start or due to use of the "Calibrate Gryo" action, (B) if the current orientation were sufficiently different from 0/0/0, and (C.) if the particular magnetometer had sufficiently large offsets.  Why did resetting the DCM matrix to 0/0/0 pitch/roll/yaw at ground start cause a bug?  The magnetometer offset nulling determines the proper offsets for the magnetometer by comparing the observed change in the magnetic field vector with the expected change due to rotation as calculated from the rotation in the DCM matrix.  This comparison is made at 10Hz, and then filtered with a weight based on the amount of rotation to estimate the offsets. Normally it would take considerable time at normal in-flight rotation rates for the offset estimate to converge. 

If a DCM matrix reset occurs when the offset nulling algorithm is up and running, the algorithm sees the DCM reset as a instantaneous rotation, however the magnetic field vector did not change at all.  Under certain conditions the algorithm would interpret this as indicating that the offset(s) should be very large.  Since the "rotation" could also have been large the filter weighting would be large and it was possible for a large erroneous estimate of the offset(s) to be made based on this single (bad) data point.

To fix this bug methods were added to the compass object to start and stop the offset nulling algorithm.  Further, when the algorithm is started, it is set up to get fresh samples.  The DCM matrix reset method now calls these new methods to stop the offset nulling before resetting the matrix, and resume after the matrix has been reset.
 2012-01-12 14:44:24 -07:00
Andrew Tridgell 49cf409c23 desktop: floating point precision changes from Justin Beech 2012-01-11 21:31:59 +11:00
Jason Short e2830ca147 fixed type error 2012-01-10 23:43:44 -08:00
Jason Short 354d9588bf sensorSign swicth 2012-01-10 23:43:44 -08:00
Jason Short b6fc8e519c AP Rangefinder had some bad characters in it. Converted and cleaned the text files. 2012-01-10 23:42:26 -08:00
Jason Short 351be7c305 Made timer unsigned 2012-01-10 23:42:26 -08:00
Pat Hickey a19afd926a APM_RC & ArduCopter: Change interface to SetFastOutputChannels to use _BV 
* Every use of MSK_CH_n changed to _BV(CH_n)
* Easier to read, and will allow CH_n to be parameterized without needing
  a separate macro expansion for the MSK value.
 2012-01-09 21:57:01 -08:00
Doug Weibel 756793611f Repair dataflash test 2012-01-08 21:29:19 -07:00
Jason Short d0af95f0e3 allows main code to manually set the integrator value 2012-01-04 09:28:36 -08:00
Andrew Tridgell ca39fc8b47 sitl: added build targets for different ACM frames 2012-01-04 21:45:46 +11:00
Andrew Tridgell 60185509f4 AP_Compass: when I2c fails, don't retry for 1s 2012-01-04 16:35:47 +11:00
Andrew Tridgell 9fb3b13af3 AP_Baro: when I2c fails, don't retry for 1s 2012-01-04 16:35:16 +11:00
Andrew Tridgell 880c7e6411 DataFlash: cope with older dataflash chips 
some of the APM2 DataFlash cards use an older chip with only 4096
pages, and a density code of 6. Doug has one of these.
 2012-01-04 16:16:35 +11:00
Michael Oborne 306e2e3f7d add gps character count. 
this problem happens when the mtk ends up in nmea mode at 10hz. there is no 50ms window of no activity
 2011-12-31 13:05:33 +08:00
Michael Oborne 3d85f99546 remove gps callback in wait loop 2011-12-31 09:35:40 +08:00
Randy Mackay a2edba69b1 GPS - removed GPS_MTK, GPT_NMEA and GPS_UBLOX. All functionality moved to AP_GPS many months ago. 2011-12-30 22:25:00 +09:00
Jason Short 7adc80c513 removed newlines to clean up code 2011-12-29 23:02:01 -08:00
Randy Mackay bbe6dea980 OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell 074fd31506 Baro: fixed MS5611 example sketch 2011-12-28 21:49:29 +11:00
Andrew Tridgell 820153d7ae compass: show timing in compass test 2011-12-28 21:44:18 +11:00
Andrew Tridgell f871235480 Baro: show timing in baro test 2011-12-28 21:43:52 +11:00
Andrew Tridgell 8f74631882 DCM: don't use compass unless its healthy 2011-12-28 20:41:54 +11:00
Andrew Tridgell 7c098491b9 I2C: fixed some warnings 2011-12-28 20:41:53 +11:00
Andrew Tridgell 5f38663d44 desktop: exclude I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell e1c9c063a5 MPU6k: don't init the Wire library 
we don't use Wire any more
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 7ba744a11a I2C: convert barometer library to new I2C library 
this also adds a healthy attribute and error checking
 2011-12-28 20:41:53 +11:00
Andrew Tridgell acf4e9b61d I2C: convert compass code to new I2C library 
this also adds a healthy attribute, and error checking on all I2C
calls
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 8ee336e715 I2C: imported the I2C library from Wayne Truchsess 
this gives us a more robust interface, including timeouts
 2011-12-28 20:28:31 +11:00
Andrew Tridgell e7dab19260 TimerProcess: prevent a race in setting up the timer callbacks 2011-12-28 16:00:49 +11:00
Andrew Tridgell 5e4f66e525 DataFlash: moved high level logging logic to library 
this moves out all the high level logic from ArduPlane/ArduCopter to
the library. It also adds a "config page", as the last page in the
flash. This is used to check if the flash needs erasing. We only erase
now if the DF_LOGGING_FORMAT has changed.

This patch also adds a public CardInserted() method, which is used to
disable logging on APM2 if a dataflash card is not inserted
 2011-12-28 16:00:48 +11:00
Andrew Tridgell bd9488f1e4 DataFlash: fixed sense of card detect 2011-12-28 16:00:48 +11:00
Andrew Tridgell 6ca613337b MPU6000: protect the driver from double initialisation 
initialising twice can lockup the driver
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 18d26dc74e MPU6000: minor fixes 
the hardware functions should be private, and cs_pin should be uint8_t
 2011-12-28 16:00:48 +11:00
Andrew Tridgell 4d71482d1c TimerProcess: check for duplicate registrations 
if a driver gets initialised twice, make sure it doesn't get called
twice in the timer loop
 2011-12-28 16:00:48 +11:00
Andrew Tridgell dbaa6fb6d2 TimerProcess: make some variables uint8_t 
save a couple of bytes
 2011-12-28 16:00:48 +11:00
Mike Smith 3582ad4e20 Fix issue #423 - FastSerial flush bug. 2011-12-26 15:52:21 -08:00
Andrew Tridgell 637d4675e1 added in DataFlash.cpp 
forgot this ....
 2011-12-26 19:34:06 +11:00
Andrew Tridgell 9bb0bd0341 desktop: added attachInterrupt() support 2011-12-26 19:17:11 +11:00
Andrew Tridgell a39a470d75 desktop: fixed for new DataFlash inheritance 2011-12-26 19:17:11 +11:00
Andrew Tridgell 977326e991 dataflash: reworked classes to move most code to parent class 
this moves all the non-hardware specific code to the parent
DataFlash_Class class, keeping the hw specific code much smaller and
simpler.

This should prevent discrepancies creeping in between APM1 and APM2
support again
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 13b2ddcbe1 dataflash: fixed APM2 flash logging 
we had log wrap disabled on APM2, and also had the wrong log size. The
mainline code assumed 4096, but it is 8192 pages long.
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 04daeab7c0 MPU6000: change to 98Hz low pass filter 
based on recommendation from Pat
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 10ca54ef8f MPU6000: use data ready interrupt to prevent stale data 
We listen for a data ready interrupt and only read new data in read()
if there is new data
 2011-12-26 19:17:11 +11:00
Andrew Tridgell 760aa62c75 fixed the MPU6000 test sketch 2011-12-26 19:17:11 +11:00
Randy Mackay 4620186328 Merge remote-tracking branch 'origin/master' 2011-12-25 12:34:16 +09:00
Randy Mackay c24b5229e1 AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell b72f9c2e9f added MPU6000 test sketch 
this doesn't work yet - Pat, any idea why?
 2011-12-25 12:03:39 +11:00
Andrew Tridgell f11a5edbc7 removed dead test program 
this one doesn't build, and has been replaced by IMU_MPU6000_test
 2011-12-24 18:11:04 +11:00
Andrew Tridgell 8780a60234 ADC: update for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell e7720254dd AP_Baro: update MS5611 driver for new ap_proceduce prototype 
this saves calling millis() quite so often
 2011-12-21 23:31:38 +11:00
Andrew Tridgell f97b405b56 MPU6k: update driver for new ap_proceduce prototype 2011-12-21 23:31:38 +11:00
Andrew Tridgell 79d6c21dde PeriodicProcess: added set_failsafe() call 
this adds an optional failsafe function that will be called in the
timer loop
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 11b8d56434 added comment in polygon code 2011-12-21 23:31:38 +11:00
Andrew Tridgell bc9e943969 rollover is not a bug 
subtracting unsigned numbers does the right thing
 2011-12-21 23:31:38 +11:00
Andrew Tridgell 97f8d21c1b added code format markers to AP_InertialSensor library 2011-12-21 23:31:38 +11:00
Andrew Tridgell 59d2d2d783 fixed build of IMU_MPU6000_test 2011-12-21 23:31:38 +11:00
Andrew Tridgell e7568db237 fixed comment 2011-12-19 20:52:59 +11:00
Andrew Tridgell 6efa2e53cb AP_Math: re-work polygon algorithm for perfect precision 
using sign checking and 64 bit integer math only when needed results
in an algorithm that is just as fast as the floating point version,
but has perfect results for any representable lat/lng
 2011-12-19 18:52:56 +11:00
Randy Mackay e070109e21 AP_RangeFinder - change sonar example sketch to use default Sonar PIN for APM2 (A1) 2011-12-18 14:15:50 +09:00
Andrew Tridgell a3a0e5646f polygon: improve the speed and precision of the polygon algorithm 
now takes 156 usec per test, with a 11 point boundary
 2011-12-18 12:59:50 +11:00
Michael Oborne 92886cfa10 make file relax 2011-12-17 20:42:51 +08:00
Michael Oborne f4b7aea1ee add relax 2011-12-17 16:53:14 +08:00
Andrew Tridgell bb0f179495 AP_Baro: fixed temperature on MS5611 
this caused a 2x scaling of altitude
 2011-12-17 14:58:58 +11:00
Andrew Tridgell 6341db7031 Revert "ADC: only read channels that are actually being used" 
This reverts commit 95e6bb26f4772ca8c7faa62215de6f078d3df3c7.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell d442bad413 Revert "ADC: added an enable_channel() API" 
This reverts commit dafeac01d8f14162600cf821404ba4072dcae14d.

ADC will be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 99eafbbe38 Revert "ADC: fixed HIL build" 
This reverts commit 86c1a6a5fdd929516cf0f64f4d610cfcd4b4f774.

ADC will now be disabled on APM2
 2011-12-17 07:29:09 +11:00
Andrew Tridgell 10e546eebd AnalogSource: return a float from read() method 
this gives the full resolution when using the ADC backend. It also
adds scaling for the Arduino backend
 2011-12-17 07:29:09 +11:00
Andrew Tridgell f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Andrew Tridgell d4b66139dc ADC: fixed HIL build 2011-12-16 20:58:04 +11:00
Andrew Tridgell dc01d55740 added missing mavlink headers 2011-12-16 20:53:26 +11:00
Andrew Tridgell 42522baf9f geofence: store fence points as int32_t 
this keeps maximum precision in fence boundaries
 2011-12-16 20:11:51 +11:00
Andrew Tridgell a4c03cceff mavlink: include latest geofence message changes 2011-12-16 20:11:51 +11:00
Andrew Tridgell 9b6bab8904 AP_Math: better polygon algorithm 
this one seems to do better with single precision floating point
 2011-12-16 20:11:51 +11:00
Andrew Tridgell dc20d89375 MAVLink: update to latest mavlink XML 
this includes the geo-fencing messages
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 9591317dbc ADC: added an enable_channel() API 
enable_channel() must be used before the Ch6() method is called to
enable gathering of data on the required channels
 2011-12-16 20:09:40 +11:00
Andrew Tridgell c41e7c505b timer: enable interrupts during timer processing 
this prevents us losing serial bytes when we call sensor drivers that
take more than 100usec to read.

We also prevent timer recursion by re-enabling the timer after all
callbacks are complete
 2011-12-16 20:09:38 +11:00
Andrew Tridgell 09947dace1 ADC: only read channels that are actually being used 
on the APM2 we usually use none of the ADC channels, although we may
use the airspeed sensor. This change means we detect which channels
are being read, and only do the SPI transfers for those ones. That
saves us about 100usec per timer interrupt (ie. about 10% of our CPU)
 2011-12-16 20:09:35 +11:00
Andrew Tridgell f125f6619a fixed formatting of ADC driver 
it was a nasty mix of DOS and UNIX
 2011-12-16 20:09:29 +11:00
Andrew Tridgell b484411c41 timers: change to 1kHz timer by default 
we were using a 227Hz timer, which is far too slow
 2011-12-16 20:09:25 +11:00
Andrew Tridgell e187ff149f desktop: fixed type of dword eeprom read 2011-12-16 20:09:18 +11:00
Andrew Tridgell 62e92f406e AP_Math: make out vector and matrix elements used types with fixed sizes 
this prevents differences between CPU types
 2011-12-16 20:09:11 +11:00
Pat Hickey d6a8440ef2 APM_RC_APM2: Remove OutputCh from ::Init() 
* These calls were off by one anyway, by using the channel numbers
  as ints ant not CH_n macros, and that caused an ESC cal problem.
 2011-12-15 13:47:43 -08:00
Andrew Tridgell 85e295332f AP_Math: added Polygon_complete() function 
used to veryify user supplied boundaries
 2011-12-15 14:42:34 +11:00
Andrew Tridgell 117a98f9a2 AP_Math: added a Polygon_outside() function 
this tests if a point is outside of a polygon. This will be used as
part of our geo-fencing support, and also for a new 'fenced mode'
 2011-12-15 14:34:58 +11:00
Andrew Tridgell 0147c7b6c6 DCM: added matrix_reset() method 2011-12-13 21:32:50 +11:00
Andrew Tridgell a819c1a3dc IMU: abstract the setting of the LEDs in IMU initialisation 
we need this to cope with different LED pin assignments on APM1/APM2
 2011-12-13 18:19:12 +11:00
Andrew Tridgell 90c6bad814 autotest: make magnetic field point down 2011-12-12 22:14:01 +11:00
Andrew Tridgell 081f35f51c desktop: fixed build with new AP_Baro code 2011-12-12 15:14:55 +11:00
Andrew Tridgell 8d882c3640 desktop: fixed desktop barometer code 2011-12-12 15:14:55 +11:00
Andrew Tridgell 3648c81dd9 barometer: fixed HIL barometer build 2011-12-12 15:14:55 +11:00
Andrew Tridgell 5d503fd65e ADC: change adc.Ch() to return a float 
this gives us a bit more precision in airspeed measurement, and costs
us virtually nothing as we are converting to float immediately after
getting the value
 2011-12-12 15:14:55 +11:00
Andrew Tridgell 14866927e1 dcm: fixed an uninitialised variable 
if no compass and not in motion the DCM we would multiply by an
uninitialised number
 2011-12-11 15:21:10 -08:00
Pat Hickey f4aaa56b16 AP_Baro_MS5611: Asynchronous operation, plus c++ style changes. 
Yeah, I know this was a big change to make all at once.
 2011-12-11 15:21:10 -08:00
Pat Hickey d026e48032 AP_Baro : Add init( AP_PeriodicProcess * ) method to interface & implementations 
AP_Baro_MS5611 and AP_Baro_BMP085 implement the interface, with stubs only
 2011-12-11 15:21:10 -08:00
Pat Hickey a626e21e98 AP_Baro_BMP085: move apm2_hardware flag from init to constructor. 2011-12-11 15:21:10 -08:00
Pat Hickey f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey 49ca774734 AP_PeriodicProcess: AP_TimerProcess can register multiple callbacks. 2011-12-11 15:21:10 -08:00
Pat Hickey 1bfab64543 AP_Baro_BMP085: Delete commented out code 
* If its important to get old code back, thats why version control exists
 2011-12-11 15:21:09 -08:00
Pat Hickey f3270b7f13 AP_Baro_BMP085: implement AP_Baro interface 2011-12-11 15:21:09 -08:00
Pat Hickey f52453beed AP_Baro_MS5611: init must also perform SPI.begin 2011-12-11 15:21:09 -08:00
Pat Hickey 64eb1889ab AP_Baro_MS5611: CS pin is arduino pin 40 2011-12-11 15:21:09 -08:00
Pat Hickey 1832ed0355 AP_Baro_MS5611: Implement AP_Baro interface 2011-12-11 15:21:09 -08:00
Pat Hickey f0ab0318b3 AP_Baro_BMP085: Conform to AP_Baro interface. Make the rest private. 2011-12-11 15:21:09 -08:00
Pat Hickey a41b6da263 AP_Baro_MS5611: conform to AP_Baro interface 2011-12-11 15:21:09 -08:00
Pat Hickey d113992c10 AP_Baro: Create virtual interface 2011-12-11 15:21:09 -08:00
Pat Hickey fdffd69257 AP_Baro_MS5611: renamed class implementation from APM_MS5611 2011-12-11 15:21:09 -08:00
Pat Hickey c407b0d85e AP_Baro_MS5611.h: reorganized 
* moved ms5611 macros to c file
* reorganized class declaration & retabbed
* made Temp, Pres, and Alt private variables.
 2011-12-11 15:21:09 -08:00
Pat Hickey 34cebd8a3e AP_Baro_MS5611: Overwrote with Jose Julio's latest files. 2011-12-11 15:21:09 -08:00
Pat Hickey cc6837cbab AP_Baro: Export AP_Baro_BMP085 and AP_Baro_BMP085_HIL headers. 2011-12-11 15:21:09 -08:00
Pat Hickey f445ec1242 AP_Baro_BMP085(+_HIL): Rename classes from APM_BMP085 to AP_Baro_BMP085. 2011-12-11 15:21:09 -08:00
Pat Hickey 7032c32b42 BMP085 fix line endings 2011-12-11 15:21:09 -08:00
Pat Hickey 7ef146044e AP_Baro: move all APM_BMP085 files inside AP_Baro 2011-12-11 15:21:09 -08:00
Pat Hickey 9250053bfe Added AP_Baro and AP_Baro_MS5611 classes. 
Incomplete and does not work.
 2011-12-11 15:21:08 -08:00
Randy Mackay 67855b207d Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Pat Hickey 56b0be3124 APM_RC: APM1 fast output speed increased to 400hz. 2011-12-10 13:06:06 -08:00
Pat Hickey 7afb091f26 APM_RC: APM2 fast output speed increased to 400hz. 2011-12-10 13:04:11 -08:00
Pat Hickey f3a4fbc7af AP_IMU_INS: Eliminate init_accel from cold start. 
* Bug reported by Jason, 10 Dec 11
 2011-12-10 13:00:54 -08:00
Randy Mackay fa0723f115 ArduCopter - removed limitation on Maxbotix sonar type requiring ADC so it can work with APM2. 
modified default analog pin in test sketch to be AN4 which is consistent with APM2 default
 2011-12-10 18:33:30 +09:00
Randy Mackay df1e54ec79 RangeFinder - fixed example sketch so it works again 2011-12-10 16:32:34 +09:00
Randy Mackay 1f53c25577 RangeFinder - small bug fix to initialise prescale variable. 
Fixed up example sketch so it compiles and works again!
 2011-12-10 16:25:41 +09:00
James Goppert 6dc236b8f2 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-07 20:59:15 -05:00
Jason Kemmerling 21c3282c9c Fixed along track bug. 2011-12-07 20:55:06 -05:00
James Goppert 2feacea1f1 Added APM2 support. 2011-12-07 19:19:30 -05:00
James Goppert a25353da79 Added AP_Board to APO 2011-12-07 16:31:56 -05:00
Jason Short 9d1f56c6da Split P and I term 2011-12-06 21:10:30 -08:00
Jason Short 9ed6463b39 Split the P and I terms in PI 2011-12-06 21:08:47 -08:00
Wenyao Xie c4203631dc APO velocity/ altitude working. 2011-12-06 19:38:23 -05:00
Wenyao Xie 2432ae130d Fixed baro. 2011-12-06 18:56:16 -05:00
Wenyao Xie 7593aae452 Fixed Barometer Altitude 2011-12-06 13:28:39 -05:00
Wenyao Xie 410c18ac05 Fixed Barometer Reading 2011-12-06 13:26:07 -05:00
Wenyao Xie 50032ef703 Working on baromemter altitude 2011-12-05 20:57:19 -05:00
Jason Kemmerling 1d9efea9af Sailboat wind measurement working. 2011-12-05 15:53:29 -05:00
Andrew Tridgell 5c99035823 fixed the desktop build 
This fixes a vtable link bug
 2011-12-05 18:06:58 +11:00
James Goppert 7fae764c55 Along track fix for negative. 2011-12-04 01:36:53 -05:00
James Goppert 98a21a70c0 Improved along track calculation for APO. 2011-12-04 01:25:14 -05:00
James Goppert f8fab5f7d6 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-04 00:45:34 -05:00
Wenyao Xie fd77fe5a9d Rover live test WORKS! "Murphy's Law is a turtle" 2011-12-03 22:42:08 -05:00
Jason Short fa7f39ba20 Access to _clamp val. May want to make a private member and write accessor. 2011-12-03 17:57:12 -08:00
Jason Short e37dffadf3 Added faster conversion from and to degrees*100 / rads 2011-12-03 17:56:41 -08:00
Andrew Tridgell b4965d34a9 GPS: added FAKE_GPS_LOCK_TIME 
this allows you to fake up a GPS lock after a specific number of
seconds
 2011-12-04 09:06:57 +11:00
Wenyao Xie dac3ba48e0 Fixed apo live mode bugs for 2.0 update. 2011-12-03 15:38:37 -05:00
Wenyao Xie a802796c67 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-12-03 14:00:23 -05:00
James Goppert 8300c5e738 Changed BlockPIDDfb behaviour. 2011-12-03 12:13:11 -05:00
Andrew Tridgell f96a48e42b autotest: support all 11 PWM output channels 
this will allow for more complex aircraft
 2011-12-02 22:45:48 +11:00
Andrew Tridgell 66d65121cc autotest: switch to big-endian metric packets internally 
now that all the sim code is internal to the APM git repo, we can
choose saner packet formats
 2011-12-02 22:12:58 +11:00
Andrew Tridgell 43e3948816 desktop: show the full path to the desktop executable 2011-12-02 21:46:55 +11:00
Andrew Tridgell 7167fec784 desktop: added SO_REUSEADDR after accept() 2011-12-02 17:37:55 +11:00
Andrew Tridgell 706c6c38fa desktop: fixed calculation of angular velocities 
thanks to James Goppert for the frame conversion maths
 2011-12-02 17:37:54 +11:00
James Goppert b9f370e33d Commented out debugging in guide. 2011-11-29 18:08:50 -05:00
James Goppert 38c19c50be Merge branch 'master' of github.com:arktools/ardupilotone 
Conflicts:
	libraries/APO/AP_Guide.cpp
 2011-11-29 18:06:38 -05:00
James Goppert b6dcd70cf9 Working on yaw command. 2011-11-29 17:38:18 -05:00
Wenyao Xie a0824b4cbe Fixed guidance bugs in APO. 2011-11-29 17:37:42 -05:00
James Goppert 92efa90d0f APO fixes. 2011-11-29 13:59:44 -05:00
James Goppert e8d74ae3fe Fixed apo radio error. 2011-11-28 12:29:05 -05:00
James Goppert 83aceb5e8f Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-28 00:56:29 -05:00
James Goppert 715e7c84a4 Updated apo for merge with apm 2.0 changes. 
Still need to handle switches for 2.0 board in hal.
Should probably move into hal ctor.
 2011-11-28 00:53:30 -05:00
Andrew Tridgell bdb1599e96 desktop: improved the accuracy of the sensor emulation 2011-11-28 16:22:33 +11:00
Andrew Tridgell e491168273 ADC: remove a very small (0.2 degrees/s) bias in the ADC code 
small bias from integer rounding
 2011-11-28 16:22:33 +11:00
James Goppert fcb4d9cb15 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-27 23:56:17 -05:00
James Goppert 999a5892f0 Fixed mode switching. 2011-11-27 23:55:28 -05:00
Andrew Tridgell df957db8d9 desktop: setup TCP sockets as non-blocking 
the sendto() blocks unexpectedly on MacOS
 2011-11-28 13:53:57 +11:00
Andrew Tridgell 4036604fb7 mavlink: move Mavlink_compat.h to common code 
this will allow it to be used by ArduCopter
 2011-11-28 13:53:57 +11:00
Doug Weibel 997ddde7f5 Added back the feature to prompt users when an invalid CLI command is entered. 
Thanks to Yury Smirnov for this patch!
 2011-11-26 21:10:53 -07:00
Andrew Tridgell 0da5125b7f upload: force hex file format for upload 
this should fix a problem with hex file format detection on MacOS
 2011-11-27 09:36:10 +11:00
Andrew Tridgell 0720bf7bf1 desktop: build fix for fjall 2011-11-26 18:24:29 +11:00
Andrew Tridgell f2a0a49d55 desktop: fixed desktop build for strlcat_P() changes 2011-11-26 17:18:09 +11:00
Andrew Tridgell 7fa59a6849 AP_Common: added typesafe wrapper for memcpy_P() 2011-11-26 17:17:50 +11:00
Andrew Tridgell 92e0e929a4 AP_Common: replace strlcat_P() with a C implementation 
the one in the Arduino libc was giving us bogus results on one
machine, and is suspect. We couldn't spot what is wrong in the
assembler, but replacing the implementation with a C one fixes the
bug, so we replaced it
 2011-11-26 17:02:56 +11:00
Andrew Tridgell c9b0b384f7 desktop: added framerate and initial height code 
this allows the sensors to initialise before the simulator has
connected. The GPS will give a value indicating no GPS lock
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 24a7a18481 desktop: fixed swap_float() 
get indexes right
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 62f98b091f desktop: import updated DataFlash code 
this fixes a logging bug
 2011-11-25 20:00:19 -08:00
Andrew Tridgell de0c38339d desktop: fixed ADC value for airspeed 2011-11-25 20:00:19 -08:00
Andrew Tridgell 02f25ac36d libraries: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 2b7e0c8494 DataFlash_Purple: added new logging methods needed for ArduPlane 
builds, but not tested yet
 2011-11-25 20:00:18 -08:00
Andrew Tridgell cba93dbd43 DataFlash_APM1: re-add defines lost from merge 2011-11-25 20:00:18 -08:00
Andrew Tridgell 0ee654d6bf desktop: fixed desktop build 
vtable error
 2011-11-25 20:00:18 -08:00
Andrew Tridgell de2898e5db desktop: normalise roll and pitch rates 2011-11-25 20:00:18 -08:00
Andrew Tridgell 91b03a48c1 desktop: added SKETCH as a define 
useful for automatically handling copter vs plane
 2011-11-25 20:00:18 -08:00
Andrew Tridgell ffba37d599 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Pat Hickey b8c44d2fc0 APM_RC: _set_speed functions implemented for APM_RC_APM1 and _Purple 
* I have not tested any of these on real hardware.
 2011-11-25 20:00:18 -08:00
Pat Hickey ea4c220ee9 APM_RC: OCR register init moved from ArduCopter/radio.pde to lib inits. 2011-11-25 20:00:18 -08:00
Andrew Tridgell 6093db948b compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 18986d1d9f barometer: fixed for purple build 2011-11-25 20:00:18 -08:00
Andrew Tridgell 0601f7e8ce barometer: support 'make purple' for barometer example code 2011-11-25 20:00:18 -08:00
Andrew Tridgell 41caa949ca fixed InertialSensor stub build 2011-11-25 20:00:18 -08:00
Pat Hickey d2a0bd35f4 hil-sensors: added stub libraries for InertialSensor and PeriodicProcess 
* Also added dummy ivar to APM_BMP085_hil
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 94423bc335 AP_IMU: fixed shim driver prototype 2011-11-25 20:00:18 -08:00
Andrew Tridgell e0488e134f desktop: fixed build with updated dataflash interface 2011-11-25 20:00:17 -08:00
Andrew Tridgell 8245835ea3 desktop: make AP_InertialSensor pure virtual 
fixed a link error in Desktop build

thanks to Pat for the C++ foo
 2011-11-25 20:00:17 -08:00
Andrew Tridgell bb7af8c15a dataflash: fixed datatypes to be compatible with desktop build 2011-11-25 20:00:17 -08:00
Andrew Tridgell a9c0cbac77 desktop: make DataFlash for Desktop build replace APM1 build 2011-11-25 20:00:17 -08:00
Andrew Tridgell 6e9e857157 make configure default to 2560 
1280 is less common for devs these days
 2011-11-25 20:00:17 -08:00
Pat Hickey 82e7551c90 purple: rework DataFlash to separate purple and APM1 hardware support 
the purple support is still a work in progress, but the APM1 support
should be fine
 2011-11-25 20:00:16 -08:00
Pat Hickey a159669cee build: added jtag-program make target 
useful for when you have hosed your USB
 2011-11-25 20:00:16 -08:00
Pat Hickey e53bcba4d9 purple: rework AP_IMU library to use AP_IntertialSensor library 
the AP_IMU keeps the handling of the calibration, but most of the real
work happens in the lower level AP_IntertialSensor library
 2011-11-25 20:00:16 -08:00
Pat Hickey 82b48784ef purple: added AP_InertialSensor library 
this abstracts the way of getting inertial sensor (gyro and
accelerometer) data for the APM1 and purple hardware. The Oilpan code
is based closely on the old APM1 code
 2011-11-25 20:00:16 -08:00
Pat Hickey c9f7618ccc purple: rework the RC_Channel library for the APM_RC changes 2011-11-25 20:00:16 -08:00
Pat Hickey f36ded2854 RangeFinder: rework to use AnalogSource library 
this removes the hacks that check for the ADC object, and instead
choose the method of getting the analog sonar value via the
AnalogSource API
 2011-11-25 20:00:16 -08:00
Pat Hickey 0c0a1b1dcc purple: Added AnalogSource library 
this library abstracts out the way of getting an analog value. If the
ADC library is being used then it calls the ADC Ch() method, otherwise
it calls analogRead()
 2011-11-25 20:00:16 -08:00
Pat Hickey 017f121566 AP_ADC: rework ADC library to use PeriodicProcess and ISR_Register 
this makes it possible to build the ADC library when another driver
may also want that interrupt
 2011-11-25 20:00:16 -08:00
Pat Hickey d288b8870d purple: added PeriodicProcess library 
this library provides a clean API for drivers to request periodic
timer driven calls at whatever rate they need
 2011-11-25 20:00:16 -08:00
Pat Hickey 1daadb5068 purple: added ISR_Registry() library 
this allows libraries to register interrupt handlers, so multiple
components can use the same hardware level interrupt
 2011-11-25 20:00:16 -08:00