Commit Graph

716 Commits

Author SHA1 Message Date
Michael du Breuil e840006ff9 Sub: Check MANUAL_CONTROL target 2018-04-10 16:54:34 +01:00
Randy Mackay defdeaed95 Sub: integrate AC_Loiter 2018-04-04 10:45:10 +09:00
Randy Mackay 6728659b4a Sub: add AC_Loiter to make build 2018-04-04 10:45:10 +09:00
Francisco Ferreira ba44d11988
Sub: fix method shadowing 2018-04-03 16:29:34 +01:00
Peter Barker fa3b3964e8 Sub: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Peter Barker 05ee33d037 Sub: tidy handling of barometer calibrations 2018-04-02 23:25:05 +01:00
Peter Barker 5536a321ed Sub: move common calibration functions up 2018-04-02 23:25:05 +01:00
Peter Barker fe293abf37 Sub: factor out preflight calibration function 2018-04-02 23:25:05 +01:00
Michael du Breuil 6ebe954d51 Sub: Support new battery failsafes 2018-03-27 22:12:21 +01:00
Peter Barker 4b12fab5f5 Sub: allow DataFlash to handle log sending 2018-03-26 09:22:47 +09:00
Peter Barker c9664a9923 Sub: move handling of get_home_position up 2018-03-19 10:32:37 +09:00
Peter Barker 3af4806d38 Sub: move home state into AP_AHRS 2018-03-19 10:32:37 +09:00
Peter Barker 78ca188dc3 Sub: use ins singleton 2018-03-16 00:37:35 -07:00
Randy Mackay d43341c532 Sub: run guided velocity control at main loop rate 2018-03-16 13:50:57 +09:00
Randy Mackay c857f8332b Sub: replace NTUN with PSC logging 2018-03-16 13:50:57 +09:00
Randy Mackay 01d1d41302 Sub: integrate attitude control inertial_frame_reset 2018-03-16 13:50:57 +09:00
Randy Mackay 2154d08185 Sub: remove setting of pos-con jerk 2018-03-16 13:50:57 +09:00
Randy Mackay 2697e19513 Sub: guided removes xy mode from calls to pos-con
Also always limit angle to maintain altitude
2018-03-16 13:50:57 +09:00
Randy Mackay da17034a3d Sub: replace smoothing gain with AC_AttitudeControl::set_input_tc 2018-03-16 13:50:57 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas f63388cb07 Sub: Obey RANGEFINDER_ENABLED and AC_TERRAIN build macros 2018-03-15 15:03:22 +00:00
Ebin 5dde62cce9 Sub: Changed log message IDs to enum
Changes log message IDs to enum and removes values for the params in LoggingParameters enum
2018-03-14 09:33:39 +09:00
Peter Barker 06f6135daa Sub: use baro singleton 2018-03-08 21:20:05 -08:00
Peter Barker 5e1e3dc822 Sub: delete correct assignment operator 2018-03-08 21:20:05 -08:00
Peter Barker 15f212adc0 Sub: use AP::ahrs() for GCS_MAVLink 2018-03-07 12:34:39 +00:00
Jacob Walser c1c471dbaa Sub: Fix comment
Fix #7856
2018-03-06 13:57:34 -05:00
murata 5da13774d5 Sub: Adjust to the defined value. 2018-03-02 09:27:43 +09:00
Patrick José Pereira aafede65f7 Sub: Add camera pan functionality
Fix bluerobotics/ardusub#134

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-02-21 10:52:24 -08:00
Patrick José Pereira 1196019b53 Sub: Correct joystick transform_manual_control_to_rc_override
Correct override channel number

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-02-21 09:03:42 -08:00
Jacob Walser 8f227201e0 Sub: move reset params to default handling to GCS base class 2018-02-20 10:49:09 +11:00
dheideman 47d5de353d Sub: Set neutral controls when switching to manual/acro mode 2018-02-13 11:41:37 -05:00
Jacob Walser 08298fced6 Sub: clear roll/pitch trim when setting neutral controls 2018-02-13 11:41:37 -05:00
dheideman b94ed3aecd Sub: Adjust roll/pitch joystick button logic 2018-02-13 11:41:36 -05:00
Andrew Tridgell 59868f425e Sub: use scheduler.get_last_loop_time_s() 2018-02-13 17:15:05 +11:00
Peter Barker 44a1553535 Sub: eliminate perf_update scheduler table shim 2018-02-13 17:15:05 +11:00
Andrew Tridgell 832a96d29f Sub: use filtered loop time 2018-02-13 17:15:05 +11:00
Peter Barker ae958632ec Sub: pass log-performance-bit at init time rather than update time 2018-02-13 17:15:05 +11:00
Peter Barker 980fbf6cfb Sub: move logging of PM messages to AP_Scheduler 2018-02-13 17:15:05 +11:00
Peter Barker 3e6ba8d96e Sub: move PERF: statustext sending into AP_Scheduler 2018-02-13 17:15:05 +11:00
Peter Barker 7313d9e7a7 Sub: use AP_Scheduler's loop() function 2018-02-13 17:15:05 +11:00
Peter Barker 9bb1224cef Sub: use scheduler ticks in place of mainloop_count 2018-02-13 17:15:05 +11:00
Peter Barker 044bc9adf0 Sub: tell PerfInfo the configured loop rate 2018-02-13 17:15:05 +11:00
Randy Mackay 81d3a3106e Sub: global-pos-int uses system time
Also takes vel directly from EKF instead of inertial nav shim
2018-02-13 08:52:48 +09:00
Peter Barker ecb805768b Sub: remove shims used in scheduler table 2018-02-12 10:37:21 -08:00
Andrew Tridgell 58dfca8ccd Sub: pass loop rate to perf_info 2018-02-08 17:36:33 +11:00
Michael du Breuil 02a660e0ce Sub: Move battery logging to AP_BattMonitor 2018-02-06 00:11:32 +00:00
Randy Mackay 8d344ef7b4 Sub: removed defaults for PIDs moved to AC_PosControl 2018-01-31 08:48:21 +09:00
Randy Mackay 6a701b2412 Sub: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay cef50d8a30 Sub: velocity pi moved to position control library 2018-01-23 12:00:43 +09:00
Michael du Breuil 2b81058ca1 Sub: Support AP_BattMonitor_Params 2018-01-17 22:21:55 +00:00
Andrew Tridgell c1504dadab Sub: use AP_FEATURE_BOARD_DETECT 2018-01-15 11:46:02 +11:00
ChrisBird 0fb679b2b2 Sub: Separate max ascent and descent speeds
This is to match a change made to Copter.

It might be relevant to sub in that users may wish to have asymmetrical descent and ascent rates.

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Modes impacted:
ALT_HOLD
CIRCLE
POSHOLD

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.

The above behavior is less of a concern for Sub but to keep it consistent its been implemented it the same way.
2017-12-28 15:16:08 -05:00
dheideman 8b0b96d56e Sub: Add servo toggle button function 2017-12-28 14:14:47 -05:00
dheideman 8fec2cbea3 Sub: Add momentary servo button function 2017-12-28 14:14:47 -05:00
Daniel Heideman 963d6a7739 Sub: Add momentary relay button function 2017-12-28 14:14:47 -05:00
Peter Barker ed82421f27 Sub: remove argument to check()
Also, fence_check was renamed to check()
2017-12-28 15:38:37 +00:00
Peter Barker b25a81e09d Sub: AP_AHRS no longer requires GPS in constructor 2017-12-27 00:58:02 +00:00
Peter Barker 268b8799d0 Sub: stop setting home distance in fence 2017-12-15 01:42:49 +00:00
Andrew Tridgell 4c9f48244e Sub: removed create() method for objects
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Peter Barker 4c2a750f06 Sub: fence no longer requires AP_InertialNav 2017-12-13 10:04:50 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 63639a0838 Sub: Guided_PosVel mode: reject destination if outside the fence
Also: log guided destination and velocity and rename a variable to pos_neu_cm to better reflect the meaning
2017-12-05 08:57:55 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 9f6342a1d1 Sub: Move some common functions to AP_Math (NFC) 2017-12-05 08:54:49 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 0404d3588d Sub: Use DEGX100 define instead of hardcoded value (NFC) 2017-12-05 08:54:49 +09:00
Peter Barker 9040bb5f97 Sub: tighten type of result variable in handleMessage 2017-12-01 17:01:10 +00:00
Patrick José Pereira b724884344 Sub: Remove unnecessary cast in init_rc_out
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-11-27 15:14:34 -08:00
Peter Barker 7aaf25afd3 ArduSub: support for units on fields 2017-11-23 10:40:30 +11:00
Randy Mackay f01b483657 Sub: move barometer_accumulate to sensors.cpp
non-functional change
2017-11-22 17:13:14 +09:00
Andrew Tridgell b16ae19bce Sub: use cork/push wrapper 2017-11-21 14:10:54 +11:00
Peter Barker fc3721c123 Sub: add average and stddev time to SCHED_DEBUG output 2017-11-16 15:31:53 +00:00
Peter Barker 901dc46708 Sub: use AP::PerfInfo library 2017-11-16 15:31:53 +00:00
Peter Barker 6d2b0ecc82 Sub: AP_Camera uses GPS singleton 2017-11-16 15:28:37 +00:00
Peter Barker 2fc9b3b5f4 Sub: use gps singleton for GCS functions 2017-11-15 13:43:03 +00:00
Jacob Walser f28c58ce3b Sub: Update release notes for 3.5.2 2017-11-14 09:08:42 -05:00
André Kjellstrup 00484073b9 Sub: Option to trig by distance only when in AUTO mode 2017-11-14 00:10:22 +00:00
Peter Barker c436235b05 Sub: remove defaulting of report value in rc_calibration_checks 2017-11-08 19:08:21 +09:00
Peter Barker 450c8f4f3a Sub: remove redundant call to ins_checks
pre_arm_checks in AP_Arming already makes this call
2017-11-08 19:08:19 +09:00
Peter Barker 7961a8f5c8 Sub: rc calibration checks are called by AP_Arming 2017-11-08 19:08:01 +09:00
dheideman 99f63d63e8 Sub: Add joystick button functions for relays 3 & 4 2017-10-27 12:14:41 -04:00
Peter Barker 6d32fb7f2a Sub: call ins's periodic function 2017-10-27 16:33:45 +11:00
Jacob Walser eabc608b2e Sub: cleanup unused variable 2017-10-26 23:59:34 -04:00
Jacob Walser 1998cf93d2 Sub: JS_LIGHTS_STEP -> JS_LIGHTS_STEPS 2017-10-26 15:45:57 -04:00
Jacob Walser b7e367e21d Sub: always neutralize inputs during pilot input failsafe 2017-10-26 14:47:16 -04:00
Jacob Walser fb2e87032d Sub: use configured rc input range for lights input instead of hard coded values 2017-10-26 14:24:15 -04:00
dheideman 4e1c7fff37 Sub: Ignore input hold button if disarmed 2017-10-26 10:52:53 -04:00
dheideman 69be1725b6 Sub: Disable input hold on disarm 2017-10-26 10:52:53 -04:00
Jacob Walser 15658f1526 Sub: rework camera tilt input and slew limiting 2017-10-26 10:44:23 -04:00
Jacob Walser e8326ef120 Sub: remove manual control button debounce timer
This was a really long time for a debounce, and
this code belongs to the program actually polling for input.
2017-10-26 10:44:23 -04:00
Jacob Walser bc0827ffd7 Sub: force GND_EXT_BUS at boot for Pixhawk 1 and 2 2017-10-25 21:07:09 +11:00
Andrew Tridgell aeb2a628c4 Sub: fix for AP_Motors API change 2017-10-22 15:52:50 +11:00
dheideman 4ed02c3c94 Sub: Change input hold announcements for enable/disable 2017-10-20 16:15:47 -04:00
Jacob Walser b4ab0e2c6d Sub: Increase threshold for input hold engaged flag
Also clear input hold offsets when they are below this threshold
2017-10-20 16:03:49 -04:00
Jacob Walser 7bed518181 Sub: Don't emit tether turn status via STATUSTEXT
We have NAMED_VALUE_FLOAT do that now
2017-10-20 14:40:16 -04:00
Patrick José Pereira 1598a97734 Sub: Solve some typos
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2017-10-19 06:27:32 -07:00
Jacob Walser 2959c270a6 Sub: bugfix/typo COMPASS_OFFS_MAX default override 2017-10-11 12:51:55 -04:00
Jacob Walser 83dacdba73 Sub: Fix AP_Notify leak flag logic 2017-10-11 12:20:47 -04:00
Andrew Tridgell cf7b874b42 Sub: support simple accelcal 2017-10-10 10:57:38 +11:00
Michael du Breuil 4d1e61633b Sub: Check GPS health 2017-09-27 19:29:32 +01:00
Lucas De Marchi beabae6a98 global: use static method to construct AP_AHRS_NavEKF 2017-09-26 03:01:21 +01:00
Lucas De Marchi c9fbf7b722 global: use static method to construct AP_NavEKF3 2017-09-26 03:01:21 +01:00
Lucas De Marchi e2fe36357a global: use static method to construct AP_NavEKF2 2017-09-26 03:01:21 +01:00
Lucas De Marchi cf6ea9642e global: use static method to construct AP_Terrain 2017-09-26 03:01:21 +01:00