Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
50,810 Commits 71 Branches 508 Tags 635 MiB
Commit Graph

33 Commits

Author SHA1 Message Date
Josh Henderson c7b986f30a CubeYellow: set default EKF_IMU_MASK 2021-11-30 10:20:54 +11:00
Randy Mackay 9c1ca781f6 AP_HAL_ChibiOS: update for renamed BRD_HEAT_ parameters 2021-11-09 08:02:57 +09:00
bugobliterator 8651d99de6 HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define 2021-10-30 19:24:57 +11:00
Andrew Tridgell 68146d541c HAL_ChibiOS: removed boilerplate lines from bootloaders 2021-10-26 15:56:53 +11:00
Iampete1 8459439798 AP_HAL_ChibiOS: CubeYellow: set default IMU arming temp margin 2021-10-19 11:16:45 +11:00
Andrew Tridgell 91dce554d1 HAL_ChibiOS: removed unnecessary USB product IDs from boards 2021-05-27 09:30:30 +09:00
Andrew Tridgell bbd32844d1 HAL_ChibiOS: switch more boards to 32k FRAM 
this enables the parameter backup/restore on those boards, as well as
more waypoints

This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
 2021-03-21 11:59:12 +11:00
Andrew Tridgell 42bc9adfb7 HAL_ChibiOS: use ExpandingString for @SYS buffers 2021-01-05 10:52:00 +11:00
Ari Krupnik 79e1f5e8bd AP_HAL_ChibiOS: standard spelling of variant 2020-12-25 00:01:50 +11:00
Andrew Tridgell d283dd7d00 HAL_ChibiOS: define polarity of 3.3/5v selection for PWM 2020-07-21 08:47:27 +10:00
Andrew Tridgell 571fbf8f71 HAL_ChibiOS: update power VALID pins 2020-06-04 09:51:27 +10:00
Peter Barker 967f8bf726 AP_HAL_ChibiOS: correct description of where stdout goes 2020-05-05 07:57:57 +10:00
Andrew Tridgell a5965d5a9e HAL_Chibios: removed unnecessary debug defines 2020-04-29 07:36:55 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER 
much easier to understand
 2020-04-28 10:32:23 +10:00
Andrew Tridgell a9df9fe0c0 HAL_ChibiOS: removed clock tree settings in most hwdef.dat 
these are better set automatically in the headers. This simplifies the
task of doing a new port
 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat 
use default
 2020-04-28 10:32:23 +10:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader 
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
 2020-03-11 09:53:06 +11:00
Andrew Tridgell d422825715 HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT 
not needed any more
 2019-12-18 17:18:44 +11:00
Andrew Tridgell 0a81c48d9c HAL_ChibiOS: lower gains on CubyOrange and Yellow heater 
this should reduce the chance of baro oscillation due to rapid change
in heater temperature
 2019-11-28 21:35:29 +11:00
Michael du Breuil 21f6695acd AP_HAL_ChibiOS: Add defaults.parm for CubeOrange and CubeYellow 2019-11-20 20:52:36 +11:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2 
-O3 does not seem to be a win, and takes up a lot more flash
 2019-09-28 08:57:26 +10:00
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN 
allows for SLCAN on 2nd port
 2019-07-12 17:01:21 +10:00
Siddharth Purohit dcf17e5bc2 HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange 2019-07-12 17:01:21 +10:00
Andrew Tridgell b12cc57c64 HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes 
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
 2019-07-11 10:24:45 +10:00
Andrew Tridgell 82b171582e HAL_ChibiOS: added sensor config for cube varients 2019-05-30 15:39:57 +10:00
Andrew Tridgell 2b0a30a2c5 HAL_ChibiOS: ensure we don't overflow bootloader area 
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
 2019-05-06 12:36:41 +10:00
Siddharth Purohit 7b54103271 HAL_ChibiOS: set pwm select pins high for 3.3V PWMout on startup 2019-04-01 21:30:12 +11:00
Siddharth Purohit 051842ea34 HAL_ChibiOS: add support for PWM Voltage level selection on CubeYellow and CubeOrange 2019-04-01 21:30:12 +11:00
Andrew Tridgell 2842063146 HAL_ChibiOS: optimize CubeYellow build 
and fixed comment in CubeOrange
 2019-03-11 12:40:21 +11:00
Andrew Tridgell 59652ad147 HAL_ChibiOS: added more IMU devices for Hex Cube boards 2019-03-11 12:40:21 +11:00
mirkix c33b692f53 AP_HAL_ChibiOS: fix CubeYellow build 2018-08-14 06:26:22 +10:00
Andrew Tridgell 5c2c5efc35 HAL_ChibiOS: rename to CubeYellow 2018-07-05 07:53:48 +10:00