Commit Graph

146 Commits

Author SHA1 Message Date
Siddharth Purohit fa0f1e4c71 AP_HAL: add CANIface HAL, replace uavcan dependent one 2020-08-19 17:31:09 +10:00
Siddharth Purohit 697e4141cb AP_HAL: add common Event interface 2020-08-19 17:31:09 +10:00
Peter Barker 26666b4b3d AP_HAL: move battery type enumeration out of parameters object 2020-08-11 13:21:52 +10:00
Andrew Tridgell efe78fe3e1 AP_HAL: allow SITL to emulate 3 different types of flash storage 2020-04-14 10:02:51 +10:00
Andrew Tridgell e1792f89db AP_HAL: fixed default HAL_STORAGE_SIZE for flash storage 2020-04-14 10:02:51 +10:00
Peter Barker 09562e1f13 AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS
These are really bad defines to have hanging around for general use.
2020-03-03 10:46:06 +11:00
Willian Galvani 4afdff746e AP_HAL: Fix Navigator orientation
The Rev2 prototype board had the IMU rotated
2020-02-04 22:47:16 -05:00
Andrew Tridgell f683741a9c AP_HAL: make all semaphores recursive
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Patrick José Pereira dc44a17c46 AP_HAL: Add navigator board
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-01-16 08:01:54 +11:00
Andrew Tridgell 2d00298070 AP_HAL: added HAL_MEM_CLASS for amount of memory 2019-10-01 09:29:55 +10:00
Andrew Tridgell 43e011c7a8 AP_HAL: convert Linux compass specification to new probe list
this avoids the special handling in AP_Compass library
2019-09-04 16:27:47 +10:00
Andrew Tridgell 9d94598235 AP_HAL: convert linux boards to use baro probe list 2019-08-28 06:54:11 +10:00
Andrew Tridgell 96180018fb AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST
makes for much simpler addition of new boards, especially with more
than one IMU
2019-08-28 06:54:11 +10:00
Andrew Tridgell 5ffb8bb546 AP_HAL: enable GPIO scripting on the Disco 2019-07-06 09:02:54 +10:00
Vincent 3177d24429 AP_HAL: Make linux hardware define more readable 2019-06-04 10:00:09 +10:00
Andrew Tridgell 20d762293d AP_HAL: remove more px4 remnants 2019-02-27 20:32:37 +11:00
Andrew Tridgell c04f1180c9 AP_HAL: removed F4Light 2019-01-21 21:57:21 +11:00
mirkix 506da9ac42 AP_HAL: enable UAVCAN for bbbmini, blue and pocket 2019-01-21 08:08:59 +11:00
Andrew Tridgell 4cfb1b04ad AP_HAL: define HAL_BOARD_STORAGE_DIRECTORY for sitl, px4 and chibios 2018-11-29 16:36:29 +11:00
Andrew Tridgell e629845f00 AP_HAL: minimize features on px4-v1 2018-11-26 13:29:40 +11:00
Michael du Breuil 9a9e715af8 AP_HAL: Define HAL_HAVE_SERVO_VOLTAGE 2018-11-12 23:29:04 +00:00
Andrew Tridgell 6c6dabc33c AP_HAL: set default batt monitoring for bebop and disco 2018-10-31 20:30:35 +11:00
Andrew Tridgell ed71790945 AP_HAL: fixed PX4 LED polarity 2018-10-09 20:25:49 +09:00
Michael du Breuil 6544f16339 AP_HAL: Make BBBlue use AP_BoardLED2 2018-09-19 22:58:46 +01:00
Michael du Breuil 6f7ced73d6 AP_HAL: Remove bad GPIO LED pins on NavIO2 2018-09-19 22:58:46 +01:00
Siddharth Purohit 5e4f76886a AP_HAL: add chibios hal header to use uC specific defines 2018-09-19 12:14:15 +10:00
Andrew Tridgell b4ecc347d7 AP_HAL: always define HAL_WITH_UAVCAN on px4 2018-09-05 08:52:47 +10:00
Andrew Tridgell 55dfefb2d6 AP_HAL: added HAL_Semaphore_Recursive 2018-08-25 15:44:36 +10:00
Andrew Tridgell 0a73c3492d AP_HAL: support HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Lucas De Marchi 099eefee87 AP_HAL: Chibios: HAL_GPIO_PIN_SAFETY_IN implies HAL_HAVE_SAFETY_SWITCH 2018-08-02 13:15:02 -07:00
Lucas De Marchi 7f984f2700 AP_HAL: linux: disable safety switch
Linux boards don't really handle the safety switch.
2018-08-02 13:15:02 -07:00
Lucas De Marchi 2336d2214b AP_HAL: sitl: disable safety switch
sitl doesn't really handle the safety switch and it's actually disabled
by AP_FEATURE_SAFETY_BUTTON.
2018-08-02 13:15:02 -07:00
Andrew Tridgell 0fc6ca22f7 AP_HAL: setup HAL_I2C_INTERNAL_MASK for ChibiOS 2018-07-14 17:51:50 +10:00
Andrew Tridgell 4939f30ec4 AP_HAL: make linux internal i2c be 0xffff
based on feedback from Lucas
2018-07-10 15:39:47 +10:00
Andrew Tridgell b19219d636 HAL_Linux: allow for 16 I2C buses on Linux 2018-07-10 15:39:47 +10:00
Andrew Tridgell 281a1b6569 AP_HAL: added I2C bus mask functions and macros 2018-07-10 15:39:47 +10:00
Andrew Tridgell eb2c9dfe74 AP_HAL: define CHIBIOS_SHORT_BOARD_NAME if not defined 2018-06-29 20:27:36 +10:00
Michael du Breuil 2577e5ff25 AP_HAL: Don't always define GPIO pins, they may be connected to real
hardware
2018-06-27 15:25:44 +10:00
Lucas De Marchi 49d08ba72a Global: remove minlure
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.

It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
2018-06-26 07:32:08 -07:00
Peter Barker f5eb281efd AP_HAL: use AP_RTC
Also add a define as to whether set_time / get_time can be used
2018-06-15 08:01:22 +10:00
Eugene Shamaev c410feefa1 AP_HAL: add CAN bus declaration for the intel aero board 2018-05-25 13:53:17 +10:00
Lucas De Marchi a56106cccb AP_HAL: use buildsystem for default directories 2018-05-24 08:00:33 -07:00
Lucas De Marchi 1e7ad72909 AP_HAL: use default storage for more boards
Boards from Emlid, Erle Robotics and BBB-like ones were agreed to be
changed #7100. Here I'm also change some more, just because they appear
to be using the old default just because of copy and paste. We can
always revert back if we get complains and it seems something trivial.
Almost all boards now are using the the default path for logs, terrain
and params, except those that have restrictions to do so, like ones
using custom distros.
2018-05-24 08:00:33 -07:00
Eugene Shamaev 9a22e11b92 AP_HAL: HAL_RCINPUT_WITH_AP_RADIO definition
Remove moved skyviper-v2450-px4 definitions

Co-authored-by: Francisco Ferreira <OXINARF@users.noreply.github.com>
2018-05-22 08:35:01 +09:00
Francisco Ferreira 695d92ddbf AP_HAL: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
mirkix 76802740cb AP_HAL: fix PocketPilot HMC5843 I2C bus number 2018-05-12 07:16:50 +10:00
mirkix dfd2fb1841 AP_HAL: move BUZZER_PIN into AP_HAL 2018-05-10 17:48:25 +01:00
mirkix 8c36635a8c AP_HAL: LED GPIOs for final PocketPilot design 2018-05-09 16:16:42 -07:00
Lucas De Marchi b54b95de12 AP_HAL: minlure: search for specific I2C controller
The number can change from one kernel version to another and even from
one boot to another. Find the I2C controller on sysfs and stick to that,
like it's done for PCA9685.
2018-05-04 11:47:04 -07:00
Lucas De Marchi 4f2498947b AP_HAL_Linux: remove redundant ifdef
CONFIG_HAL_BOARD_SUBTYPE should be set in the boards header.
2018-05-04 11:42:55 -07:00