dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
40,845 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

159 Commits

Author SHA1 Message Date
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 4c5aa12a18 airmind_mindpx-v2: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Tanja Baumann b5ebdb8e41
add system command to get and set system time 
* add system_time command for all boards
 2020-09-26 13:09:01 -04:00
David Sidrane 34d1fcc704 airmind_mindpx-v2: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 8e97ae323e airmind_mindpx-v2 Updates for NuttX 9.1.0- 
airmind_mindpx-v2: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
Daniel Agar 198466306e
boards: airmind mindpx-v2 fix internal qmc5883l rotation 2020-09-13 18:28:31 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 24125b3da4
magnetometer/qmc5883l: cleanup/rewrite driver (#14384) 2020-09-02 13:16:27 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
rolandash b8f3b97bad
Enable PMW3901 on MindPX/MindRacer. (#15375) 
* enable pmw3901 on MindPX/MindRacer.

* remove useless line.
 2020-07-19 16:09:57 +01:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 28d2aca699 boards: include all procfs entries on boards that aren't flash constrained 2020-05-01 20:59:57 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar 02f4ad61ec
I2C/SPI require device type in constructor 2020-04-01 12:24:22 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Daniel Agar 39b47e63b5 boards: airmind mindpx-v2 switch to new mpu6000 and mpu6500 drivers 2020-03-31 16:28:45 -04:00
Daniel Agar a38d4192ab boards: airmind mindpx-v2 fix L3GD20 DRDY pin 2020-03-30 09:21:00 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Daniel Agar f4e2cd36d4 add new invensense/mpu6500 driver for airmind mindpx 2020-03-25 01:05:38 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng 609eafd4cd refactor l3gd20: use driver base class 2020-03-24 09:46:20 -04:00
Beat Küng 6cf4de9e02 refactor lsm303d: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
rolandash 7d7fe9e4da Add onboard qmc5883 support for MindPX/MindRacer. 2020-03-20 13:19:53 -04:00
Beat Küng 8ebde51648 refactor hmc5883: use driver base class 
Removes the calibration on startup, as these values were overwritten by
the system calibration values anyway.
So the only difference is that if all calibration scales were equal to 1,
the driver startup would have failed.
 2020-03-17 23:31:17 -04:00
Daniel Agar 0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Beat Küng 179c89b6bd board configs: extend board_dma_map.h with a table 2020-03-11 22:08:37 -04:00
Daniel Agar 98108bc4da airmind_mindpx-v2: add board_dma_map.h and enable SPI1 DMA 2020-03-11 22:08:37 -04:00
Daniel Agar f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
Daniel Agar 4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output 
These are not required, and to be consistent we enforce disabling them now.
 2020-02-13 03:49:16 -08:00
Beat Küng 366e2b9dc9 airmind/mindpx-v2: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes 
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
 2020-02-13 03:49:16 -08:00
Daniel Agar dc05ceaad2
create temperature_compensation module 
- this is a new module for temperature compensation that consolidates the functionality previously handled in the sensors module (calculating runtime thermal corrections) and the events module (online thermal calibration)
 - by collecting this functionality into a single module we can optionally disable it on systems where it's not used and save some flash (if disabled at build time) or memory (disabled at run time)
 2020-01-20 21:42:42 -05:00
Daniel Agar bc182e94e6
sensors split rc_update into new standalone module 2019-11-24 13:25:11 -05:00
Daniel Agar 5aaf1b100b delete unused md25 driver 2019-11-21 18:56:24 -05:00
Daniel Agar 8c38176d77 boards: alphabetize and sync common drivers and modules 2019-11-21 18:56:24 -05:00
Daniel Agar 84fe64b1c2
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control 2019-11-19 17:03:11 -05:00
Daniel Agar 99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00
David Sidrane 12a70402ad airmind:mindpx-v2 BSP Updated to NuttX 8.1+ 2019-11-16 11:43:42 +01:00
Daniel Agar 668984b6b0 boards: start adc in rc.board_sensors 2019-11-11 17:08:24 -05:00
Beat Küng 3b7c1b4ff1 src/drivers/boards: move to platforms/nuttx/src/px4/common 2019-10-30 11:48:47 +01:00
Beat Küng b30171ba8d board_common.h: move under platforms/common 
Also move board_determine_hw_info and board_gpio_init under platforms/nuttx
 2019-10-30 11:48:47 +01:00
Beat Küng 3198610f85 src/platforms: move all headers to platforms/common/include/px4_platform_common 
and remove the px4_ prefix, except for px4_config.h.

command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done

Transitional headers for submodules are added (px4_{defines,log,time}.h)
 2019-10-30 11:48:47 +01:00
Daniel Agar 6a0f5249f8
sensors: split out analog battery handling to new standalone battery_status module 2019-10-21 13:40:23 -04:00
Daniel Agar 315141873e NuttX boards reduce CONFIG_MAX_TASKS 64 -> 32 (default) 2019-10-02 19:44:46 -04:00
Daniel Agar 26364d44c9
px4_work_queue: command line status output and shutdown empty queues 
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
 * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
 2019-10-02 12:23:17 -04:00
garfieldG bbb96cbd0c Mavlink startup script per board 
-moved rc.mavlink to the boards optional rc additions (now it's called rc.board_mavlink) to handle board specific mavlink needs (mavlink over usb, ethernet, additional streams, etc.)
-mavlink module will be responsible to usb defaults, therefore less args are needed to be passed to mavlink module if one wants to use mavlink over usb.
-the way to check if connection is usb is by it's designated variable and not by config mode.
 2019-09-29 10:46:08 -04:00
Daniel Agar 0486d69240 delete obsolete segway example 2019-09-28 15:05:50 -04:00
BazookaJoe1900 6ab5c2170e remove unused pca8574 and oreoled drivers 2019-09-04 08:05:08 -07:00
BazookaJoe1900 e3b60cd9e7 rc.sensors: moved common ms5611 start to rc.board_sensors per board 2019-09-01 12:55:50 -04:00
Beat Küng f3fccf53f6 src/drivers/{kinetis,stm32}: move to arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng 1cb6c36a00 adc: refactor into arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng ab43a83bed platform: restructure (NuttX) architecture-specific code 
updated: tone_alarm, px4io_serial, px4_micro_hal
 2019-08-30 07:59:44 +02:00
Silvan Fuhrer cedf14e2ba Airspeed Selector: repurpose wind estimator into an airspeed (selection, validation) module. 
This new airspeed module does:
  -runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
  -selects another airspeed sensor if for the current one a failure is detected
  -estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
  -outputs airspeed_validated topic

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-08-09 10:55:05 +02:00
Daniel Agar 0955fd2d58
NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20 2019-08-07 21:23:27 -04:00
Daniel Agar 5421ef5535 NuttX increase HPWORK and LPWORK stack by 256 bytes 2019-08-06 23:15:07 -04:00
Daniel Agar 9d701a077d
NuttX reduce stack for interrupts, HPWORK, LPWORK 2019-08-06 11:00:55 -04:00
Daniel Agar 77694183b2 delete position_estimator_inav 2019-08-02 17:38:28 -04:00
Beat Küng b7a0e1ef03 boards: simplify RC port configuration by using NuttX ioctl's 
A board only needs to define:
 #define RC_SERIAL_PORT                     "/dev/ttyS4"

Then it can optionally define one or more of the following:
 #define RC_SERIAL_SWAP_RXTX
 #define RC_SERIAL_SINGLEWIRE
 #define RC_INVERT_INPUT(_invert_true) px4_arch_gpiowrite(GPIO_SBUS_INV, _invert_true)
 2019-07-16 08:09:22 +02:00
Beat Küng a3c920db7d board_defaults: remove unnecessary 'set MIXER_AUX none' 
On all of these boards '$USE_IO = no' will hold.
 2019-07-16 08:09:22 +02:00
Timothy Scott 2ed00c9cb6 Rover: Rewrote gnd_pos_control and removed gnd_att_control (#12239) 2019-07-11 09:39:13 -04:00
Daniel Agar 321c2c0392 boards don't use px4_add_library for drivers_board 
- this prevents low level board support from using PX4 logging, uORB, etc
 2019-07-09 19:09:47 -04:00
Daniel Agar 15d1543f95 create systemcmds/i2cdetect tool to scan i2c bus 2019-07-06 10:28:16 -04:00
Daniel Agar bef7a9ba8e
NuttX boards increase task limit 32 -> 64 (#12230) 2019-06-10 09:42:36 -04:00
Daniel Agar f85c15e247 board common create generic dma allocator (from fat_dma_alloc) 2019-05-30 19:31:40 -04:00
Mohammed Kabir b334b75886 Move optical flow drivers to own subdirectory 2019-05-28 23:23:38 -04:00
Beat Küng 226f3c0999 rc.board_sensors: probe for external qmc5883 2019-04-15 10:37:06 +02:00
Beat Küng 914a9b78b6 new airframe for sih, HIL_STATE_QUATERION sent through MAVLink 2019-04-12 09:25:07 +02:00
Daniel Agar 5e6bfe1ad8
vscode updates 
* working debugging (one click build and debug)
   * SITL jmavsim
   * SITL gazebo
   * jlink px4_fmu-v{2-5}
 * improved syntax highlighting
   * GNU linker files
   * ROS message files msg/*.msg
   * jinja2 template files
 * fixed intellisense support
 2019-03-22 20:55:39 -04:00
Daniel Agar 5d49e36b3a airmind_mindpx-v2 nsh compress defconfig 2019-03-21 08:41:01 -04:00
Hamish Willee 257b90958f Correct links to example docs 2019-03-15 08:05:54 +01:00
David Sidrane edd9f91a19 board:Set larger stack margin 2019-03-01 23:45:48 -05:00
mcsauder dc5f18bdcd ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class. 2019-01-28 18:58:04 -08:00
Daniel Agar 739a02022b position_estimator_inav: move to examples (start deprecation) 2019-01-27 22:15:39 +01:00
David Sidrane 55559bc72c airmind_mindpx-v2: Inital commit NuttX 7.27+ 2019-01-25 06:32:37 -08:00
Daniel Agar 2ffb49b734 delete px4_includes.h header and update boards/ to use syslog 2019-01-23 18:25:18 -05:00
Daniel Agar 67e5986c9b delete obsolete examples/subscriber 2019-01-23 18:25:18 -05:00
Daniel Agar 693ee4808a delete obsolete examples/publisher 2019-01-23 18:25:18 -05:00
Daniel Agar 320d2e9383
create PX4 platform layer initialization helper (#11269) 
- starts requirements for PX4 modules (hrt, param, etc)
 2019-01-22 14:13:20 -05:00
Daniel Agar fef65bf5c8 ROMFS split rc.board into defaults, sensors, and extras 2019-01-15 23:52:46 -08:00
Daniel Agar 1b8c2c82d5
px4flow start in rc.sensors instead of per board (#11123) 
- fixes #11009
 2019-01-01 11:39:40 -05:00
Daniel Agar 75b2053243 move uavcan from modules to drivers 2018-12-04 01:06:54 -05:00
Daniel Agar bbab66d974 move vmount to modules (it's not a driver) 2018-12-04 01:06:54 -05:00
Daniel Agar 9d42480f4e drivers create lights category (directory) 2018-12-04 01:06:54 -05:00