Michael du Breuil 84cef5b786 AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts		2024-04-05 10:53:38 +11:00
..
ACNS-CM4Pilot	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
ACNS-F405AIO	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
AIRLink	…
AR-F407SmartBat	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
ARKV6X	hwdef: ARKV6X add USART6 to serial list	2024-01-01 13:17:06 +11:00
ARK_CANNODE	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
ARK_GPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
ARK_RTK_GPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
AeroFox-Airspeed	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
AeroFox-Airspeed-DLVR	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
AeroFox-GNSS_F9P	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
AeroFox-PMU	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Airvolute-DCS2	AP_HAL_ChibiOS: add hwdef files for Airvolute DCS2 onboard FMU	2023-12-12 11:09:09 +11:00
AnyleafH7	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
Aocoda-RC-H743Dual	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
AtomRCF405NAVI	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
BETAFPV-F405	HWDEF:revert copter only build on bds with integrated escs	2024-04-03 18:31:54 +11:00
BeastF7	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
BeastF7v2	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
BeastH7	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
BeastH7v2	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
BirdCANdy	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
BlitzF745AIO	HWDEF: allow all build targets for non-integrated boarda	2024-04-02 10:17:21 +11:00
BotBloxSwitch	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
C-RTK2-HP	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CSKY405	AP_HAL_ChibiOS: add CSKY405 board	2024-04-05 10:45:00 +11:00
CUAV-Nora	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
CUAV-Nora-bdshot	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
CUAV-X7	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
CUAV-X7-bdshot	hwdef: include defaults.parm files from other identical defaults.parm	2023-09-05 11:37:19 +10:00
CUAV_GPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CUAVv5	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
CUAVv5-bdshot	…
CUAVv5Nano	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
CUAVv5Nano-bdshot	…
CarbonixF405	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CarbonixL496	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CubeBlack	…
CubeBlack+	…
CubeBlack-periph	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CubeGreen-solo	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
CubeOrange	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
CubeOrange-ODID	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
CubeOrange-SimOnHardWare	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
CubeOrange-bdshot	Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory	2024-01-17 18:28:48 +11:00
CubeOrange-joey	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
CubeOrange-periph	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CubeOrange-periph-heavy	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CubeOrangePlus	AP_HAL_ChibiOS: enable highres sampling on CubeOrangePlus	2023-10-25 19:23:11 +11:00
CubeOrangePlus-SimOnHardWare	hwdef: Cite CubeOrange-SimOnHW as the default file	2023-10-14 17:55:56 +11:00
CubeOrangePlus-bdshot	Tools/AP_HAL_ChibiOS: move defaults from tools to hwdef directory	2024-01-17 18:28:48 +11:00
CubePilot-CANMod	hwdef: remove stray HAL_BUILD_AP_PERIPH defines	2024-04-03 18:36:29 +11:00
CubePilot-PPPGW	Chibios: CubeRed - change NET_ENABLED to NET_ENABLE	2024-03-20 19:08:31 +11:00
CubePurple	…
CubeRedPrimary	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
CubeRedPrimary-PPPGW	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
CubeRedSecondary	AP_HAL_ChibiOS: CubeRedSecondary IMU orientation fix	2024-03-13 18:51:18 +11:00
CubeSolo	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
CubeYellow	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
CubeYellow-bdshot	…
DevEBoxH7v2	…
DrotekP3Pro	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
Durandal	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
Durandal-bdshot	…
F4BY	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
F35Lightning	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
FlyingMoonF407	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
FlyingMoonF427	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
FlyingMoonH743	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
FlywooF405Pro	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
FlywooF405S-AIO	HWDEF:revert copter only build on bds with integrated escs	2024-04-03 18:31:54 +11:00
FlywooF745	hwdef: remove save_some_flash.inc	2024-03-24 20:15:53 +11:00
FlywooF745Nano	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
FoxeerF405v2	AP_HAL_ChibiOS: FoxeerF405v2	2024-04-03 18:50:52 +11:00
FoxeerH743v1	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
FreeflyRTK	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
G4-ESC	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
H757I_EVAL	AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED	2024-04-03 18:36:29 +11:00
H757I_EVAL_intf	AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED	2024-04-03 18:36:29 +11:00
HEEWING-F405	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
HEEWING-F405v2	hwdef: include defaults.parm files from other identical defaults.parm	2023-09-05 11:37:19 +10:00
Here4AP	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Here4FC	hwdef: remove HAL_NO_LOGGING from Here4FC-bl.dat	2024-01-15 09:40:35 +11:00
Hitec-Airspeed	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
HitecMosaic	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
HolybroG4_Compass	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
HolybroG4_GPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
HolybroGPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
JFB100	AP_HAL_ChibiOS/hwdef: add LED_SAFETY for JFB100 board definition	2024-03-06 18:52:35 +11:00
JFB110	AP_HAL_ChibiOS/hwdef: update JFB110 board definition	2024-02-28 15:55:29 +09:00
JHEMCU-GSF405A	HWDEF:revert copter only build on bds with integrated escs	2024-04-03 18:31:54 +11:00
JHEMCU-GSF405A-RX2	HWDEF:revert copter only build on bds with integrated escs	2024-04-03 18:31:54 +11:00
JHEM_JHEF405	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
KakuteF4	hwdef:include minimal in minimize_common	2023-10-24 12:20:41 +11:00
KakuteF4Mini	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
KakuteF7	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
KakuteF7-bdshot	…
KakuteF7Mini	hwdef: remove save_some_flash.inc	2024-03-24 20:15:53 +11:00
KakuteH7	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
KakuteH7-Wing	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
KakuteH7-bdshot	…
KakuteH7Mini	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
KakuteH7Mini-Nand	…
KakuteH7v2	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
MambaF405-2022	hwdef:include minimal in minimize_common	2023-10-24 12:20:41 +11:00
MambaF405US-I2C	hwdef:include minimal in minimize_common	2023-10-24 12:20:41 +11:00
MambaF405v2	hwdef: correct inversion pin on MambaF405v2	2023-09-19 11:43:58 +10:00
MambaH743v4	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
MatekF405	hwdef: remove save_some_flash.inc	2024-03-24 20:15:53 +11:00
MatekF405-CAN	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
MatekF405-STD	…
MatekF405-TE	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
MatekF405-TE-bdshot	…
MatekF405-Wing	hwdef: remove save_some_flash.inc	2024-03-24 20:15:53 +11:00
MatekF405-Wing-bdshot	…
MatekF405-bdshot	…
MatekF765-SE	…
MatekF765-Wing	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
MatekF765-Wing-bdshot	…
MatekH7A3	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
MatekH743	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
MatekH743-bdshot	…
MatekH743-periph	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
MatekL431	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
MatekL431-ADSB	hwdef: add MatekL431 ADSB Periph	2023-10-09 16:18:13 -07:00
MatekL431-Airspeed	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
MatekL431-BattMon	hwdef: re-enable RCIN thread on some builds/boards	2024-04-03 18:36:29 +11:00
MatekL431-DShot	hwdef: re-add ESC control to AP_Periph units which lost it	2024-04-02 11:28:27 +11:00
MatekL431-EFI	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
MatekL431-GPS	hwdef: re-enable RCIN thread on some builds/boards	2024-04-03 18:36:29 +11:00
MatekL431-HWTelem	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
MatekL431-MagHiRes	hwdef: added MatekL431-HiRes build	2024-03-16 20:10:35 +11:00
MatekL431-Periph	hwdef: re-add ESC control to AP_Periph units which lost it	2024-04-02 11:28:27 +11:00
MatekL431-Proximity	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
MatekL431-RC	hwdef: re-add ESC control to AP_Periph units which lost it	2024-04-02 11:28:27 +11:00
MatekL431-Rangefinder	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
MatekL431-Serial	hwdef: added MatekL431-Serial	2023-12-27 05:13:14 -07:00
MatekL431-bdshot	hwdef: re-add ESC control to AP_Periph units which lost it	2024-04-02 11:28:27 +11:00
MazzyStarDrone	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
MicoAir405v2	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
Nucleo-G491	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Nucleo-L476	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Nucleo-L496	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
NucleoH743	…
NucleoH755	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
OMNIBUSF7V2	hwdef: do not remove OSD in common minimized boards	2023-09-06 20:32:06 +10:00
OmnibusNanoV6	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
OmnibusNanoV6-bdshot	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
OrqaF405Pro	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
PH4-mini	…
PH4-mini-bdshot	…
Pix32v5	…
PixC4-Jetson	…
PixFlamingo	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
PixFlamingo-F767	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
PixPilot-C3	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
PixPilot-V3	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
PixPilot-V6	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
PixSurveyA1	…
PixSurveyA1-IND	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
PixSurveyA2	…
Pixhawk1	…
Pixhawk1-1M	AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot	2024-02-27 12:06:57 +11:00
Pixhawk1-1M-bdshot	…
Pixhawk1-bdshot	AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot	2024-02-27 12:06:57 +11:00
Pixhawk4	…
Pixhawk4-bdshot	…
Pixhawk5X	…
Pixhawk6C	hwdef: Add support for BMI088 on Pixhawk6c	2024-01-04 07:17:24 +11:00
Pixhawk6C-bdshot	hwdef: include defaults.parm files from other identical defaults.parm	2023-09-05 11:37:19 +10:00
Pixhawk6X	hwdef: added support for Holybro6X-45686	2024-01-23 11:49:14 +11:00
Pixhawk6X-ODID	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
Pixhawk6X-PPPGW	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Pixhawk6X-bdshot	…
Pixracer	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
Pixracer-bdshot	…
Pixracer-periph	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
QioTekAdeptF407	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
QioTekZealotF427	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
QioTekZealotH743	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
QioTekZealotH743-bdshot	…
R9Pilot	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
RADIX2HD	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
RadiolinkPIX6	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
ReaperF745	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
SDMODELH7V1	hwdef: update SDH7V1 readme	2023-11-28 11:47:32 +11:00
SIYI_N7	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
SPRacingH7	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
SPRacingH7RF	AP_HAL_ChibiOS: allow H7RF to build	2024-04-05 10:23:50 +11:00
STM32CubeConf	AP_HAL_ChibiOS: Remove executable permissions	2023-09-08 17:09:26 +10:00
Sierra-F9P	hwdef: remove stray HAL_BUILD_AP_PERIPH defines	2024-04-03 18:36:29 +11:00
Sierra-F405	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-F412	hwdef: remove stray HAL_BUILD_AP_PERIPH defines	2024-04-03 18:36:29 +11:00
Sierra-L431	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-PrecisionPoint	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-TrueNavIC	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-TrueNavPro	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-TrueNavPro-G4	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-TrueNorth	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
Sierra-TrueSpeed	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
SkystarsH7HD	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
SkystarsH7HD-bdshot	…
SpeedyBeeF405Mini	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
SpeedyBeeF405WING	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
SuccexF4	HWDEF: allow all build targets for non-integrated boarda	2024-04-02 10:17:21 +11:00
Swan-K1	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
TBS-Colibri-F7	…
TMotorH743	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
VRBrain-v51	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
VRBrain-v52	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
VRBrain-v54	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
VRCore-v10	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
VRUBrain-v51	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
YJUAV_A6	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
YJUAV_A6SE	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
YJUAV_A6SE_H743	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
YJUAV_A6Ultra	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
ZubaxGNSS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
airbotf4	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
common	HAL_ChibiOS: fixed a cache corruption issue on H7	2024-03-16 21:57:33 +11:00
crazyflie2	hwdef: Make Crazyflie2 board only autobuild for Copter	2024-03-15 21:11:40 +11:00
f103-ADSB	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f103-Airspeed	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f103-GPS	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f103-HWESC	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f103-QiotekPeriph	hwdef: make f103-QiotekPeriph a single compass	2023-11-08 18:34:41 +11:00
f103-RangeFinder	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f103-Trigger	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f103-periph	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
f303-GPS	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-HWESC	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-M10025	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-M10070	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-MatekGPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
f303-PWM	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-TempSensor	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-Universal	hwdef: removed most CAN_APP_NODE_NAME defines	2023-09-06 11:21:51 +10:00
f303-periph	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
f405-MatekAirspeed	AP_HAL_ChibiOS: rename GPS_ to GPS1_	2024-03-19 19:50:12 +11:00
f405-MatekGPS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
fmuv2	hwdef:include minimal in minimize_common	2023-10-24 12:20:41 +11:00
fmuv3	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
fmuv3-bdshot	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
fmuv5	…
include	hwdef: make a skyviper.inc, use it on skyviper-journey	2024-03-26 11:07:42 +11:00
iomcu	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
iomcu-dshot	AP_HAL_ChibiOS: bdshot for f103 iofirmware	2023-12-18 19:02:52 +11:00
iomcu-f103	…
iomcu-f103-dshot	AP_HAL_ChibiOS: cache values of io_dshot() and io_enabled()	2023-12-18 19:02:52 +11:00
iomcu_f103_8MHz	…
kha_eth	hwdef: remove stray HAL_BUILD_AP_PERIPH defines	2024-04-03 18:36:29 +11:00
luminousbee4	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
luminousbee5	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRo-M10095	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
mRoCANPWM-M10126	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
mRoCZeroOEMH7-bdshot	hwdef: mRoControlZeroOEMH7 bdshot version	2023-09-13 17:04:24 +10:00
mRoControlZeroClassic	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRoControlZeroF7	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRoControlZeroH7	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRoControlZeroH7-bdshot	…
mRoControlZeroOEMH7	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRoKitCANrevC	AP_HAL_ChibiOS: mRo KitCAN revC board fix	2024-02-01 11:43:35 +11:00
mRoNexus	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRoPixracerPro	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
mRoPixracerPro-bdshot	hwdef: include defaults.parm files from other identical defaults.parm	2023-09-05 11:37:19 +10:00
mRoX21	…
mRoX21-777	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
mindpx-v2	…
mini-pix	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
modalai_fc-v1	…
omnibusf4	hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building	2023-10-17 18:21:04 +11:00
omnibusf4pro	hwdef: remove save_some_flash.inc	2024-03-24 20:15:53 +11:00
omnibusf4pro-bdshot	…
omnibusf4pro-one	…
omnibusf4v6	hwdef: remove unused STM32_PWM_USE_ADVANCED defines	2024-03-23 22:04:34 +11:00
rFCU	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
rGNSS	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
revo-mini	hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building	2023-10-17 18:21:04 +11:00
revo-mini-bdshot	…
revo-mini-i2c	hwdef:fix bug in AtomRCF405NAVI,fix some bds that aren't building	2023-10-17 18:21:04 +11:00
revo-mini-i2c-bdshot	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
revo-mini-sd	HWDEF:revert copter only build on bds with integrated escs	2024-04-03 18:31:54 +11:00
scripts	AP_HAL_ChibiOS: FoxeerF405v2	2024-04-03 18:50:52 +11:00
skyviper-f412-rev1	hwdef: tidy AP_Radio includes	2024-02-05 09:26:14 +11:00
skyviper-journey	hwdef: make a skyviper.inc, use it on skyviper-journey	2024-03-26 11:07:42 +11:00
skyviper-v2450	hwdef: remove extraneous lines from hwdef files	2024-03-26 11:09:03 +11:00
sparky2	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
speedybeef4	speedybeef4: remove redefinition of AP_BATTERY_SYNTHETIC_CURRENT_ENABLED	2023-10-26 18:15:30 +11:00
speedybeef4v3	hwdef: fix speedybeef4v3 build	2023-10-26 18:15:30 +11:00
speedybeef4v4	hwdef: remove HAL_GPIO lines which are simply the default values	2024-04-03 11:00:24 +11:00
sw-boom-f407	AP_HAL_ChibiOS: add sw-boom-f407 and supporting scripts	2024-04-05 10:53:38 +11:00
sw-nav-f405	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
sw-spar-f407	hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED	2024-04-03 18:36:29 +11:00
thepeach-k1	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00
thepeach-r1	AP_HAL_ChibiOS: remove references to legacy UART order from hwdefs	2023-12-19 06:53:15 +11:00