Commit Graph

283 Commits

Author SHA1 Message Date
Peter Barker 1c527df084 RC_Channel: note that Rover now has disable-gcs-overrides channel option 2018-09-05 11:54:32 +10:00
Peter Barker 047689981b RC_Channel: honour gcs_overrides_enabled as part of set_override
This will stop situations like we currently have where the
MANUAL_CONTROL GCS mavlink packets can still affect the vehicle

Also resolves an issue where has_new_overrides may not be set
appropriately
2018-09-05 11:54:32 +10:00
Peter Barker 7bdd9b1aea RC_Channel: move handling of disable-gcs-rc-overrides-channel-option 2018-09-05 11:54:32 +10:00
Peter Barker 3c8738b4d8 RC_Channel: add clear-waypoints option 2018-09-04 10:32:26 +10:00
Peter Barker a7acc92663 RC_Channel: move rc-channel option for lost-vehicle sound up to base class 2018-09-03 16:57:25 +09:00
Michael du Breuil 80597d5cba RC_Channel: Fix accidental quantization of override_timeout to 1 second 2018-08-28 14:18:54 +10:00
Peter Barker f2b8c9e501 RC_Channel: improve debug when failing to initialise RC channel 2018-08-21 20:34:01 +09:00
Peter Barker e4d3ed7e39 RC_Channel: move handling of sprayer and gripper in from Copter 2018-08-17 15:33:35 +09:00
Michael du Breuil e7ebea55d2 RC_Channel: Fix possible user induced out of bounds write
CID 308348
2018-08-09 10:27:10 +10:00
Peter Barker e4ff937c96 RC_Channel: remove min-max-configured pre-arm checks
These are really, really expensive to run while your RC isn't
configured.

We now have a split between inputs (RC) and servos (SRV), so these
aren't as critical as they were.  We also have range checks to ensure
they're roughly good enough to fly with.
2018-08-07 09:45:09 +10:00
Peter Barker f2b1387c1c RC_Channel: add AUTOTUNE to init_aux_function routine
Also, cark it in SITL if we fail to initialise an aux function
2018-08-05 07:52:28 +10:00
Peter Barker 61c34ea98c RC_Channel: move handling of auxillary switches into RC_Channel
RC_Channel: move handling of Rover's functions into RC_Channel

RC_Channel: move auxsw handling for camera to base RC_Channel

RC_Channel: add responsibility for servorelay events

RC_Channel: move mode switch handling to base class
2018-08-01 12:11:30 +09:00
Michael du Breuil 60f19bbf02 RC_Channel: Allow an input to be ignored 2018-08-01 09:19:20 +10:00
Michael du Breuil 16b6201195 RC_Channel: Allow a RC_OVERRIDE_TIMEOUT of -1 to use the overrides
forever
2018-07-19 07:53:43 +10:00
Michael du Breuil 95eda5d9b7 RC_Channel: Remove unneeded interfaces 2018-06-11 16:29:36 -07:00
Michael du Breuil 0fcf07fde7 RC_Channel: Remove input() method from individual channels 2018-06-05 09:51:09 +10:00
Michael du Breuil 4253c7f74d RC_Channel: Move overrides out of the HAL 2018-06-05 09:51:09 +10:00
Michael du Breuil c8fdb90ab5 RC_Channel: Rework set_pwm_no_deadzone() to a recompute function 2018-04-14 14:05:20 +10:00
Andrew Tridgell e5813effff RC_Channel: improved efficiency of min_max_configured
this is quite a costly function due to scan in AP_Param. It takes
about 4 to 5 milliseconds when done as part of AP_Arming
2018-01-10 16:42:51 +09:00
Andrew Tridgell 0155434057 RC_Channel: fixed bug in manual with TRIM == MIN
This fixes the bug described here:

https://discuss.ardupilot.org/t/arduplane-reverse-thrust-setup/18324/5

which otherwise would prevent output with TRIM == MIN or TRIM == MAX
2017-08-26 20:30:54 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas ed07d5b5c9 RC_Channel: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 8661bdda8a RC_Channel: Use SI units conventions in parameter units
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Andrew Tridgell d6d94bd26c RC_Channel: improved doc string 2017-02-07 16:32:57 +11:00
Andrew Tridgell 11afd0c7d4 RC_Channel: split RC_Channels.cpp out to separate cpp file
this is needed for automatic parameter documentation generation
2017-02-06 15:12:32 +11:00
Andrew Tridgell 0791186cd2 RC_Channel: split SRV_Channel into separate directory 2017-01-12 17:39:37 +11:00
Andrew Tridgell 64aa13e7f4 RC_Channel: 2nd stage of SRV_Channels conversion
allow for 16 output channel objects
2017-01-12 17:39:37 +11:00
murata c808ee2f49 Global: To nullptr from NULL.
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 73b9123495 RC_Channel: added set_trim() API to SRV_Channels object 2016-10-15 16:59:35 +11:00
Andrew Tridgell fea7903aa8 RC_Channel: added get_radio_out_normalised() 2016-10-15 16:59:35 +11:00
Andrew Tridgell 96c7d9dde8 RC_Channel: make output_trim() go via _radio_out
this ensures that _radio_out always contains the value that would be
output to the channel. This will be used by the SRV_Channels object
2016-10-15 16:59:35 +11:00
Andrew Tridgell 934d2b6ae4 RC_Channel: added setup_failsafe_trim_mask() 2016-06-30 16:46:57 +10:00
skyscraper d9ab3baf84 RC_Channel: Refactor to make data members private
rename all public data members of RC_Channnels with
leading underscore and make all data members private.
Provide get_xx and set_xx methods for access

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)

add function to save radio trim
(expression where c is an object of type RC_Channel)
old public member(int16_t)   get function -> int16_t     set function (int16_t)

(expression where c is an object of type RC_Channel)

c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);
// other
c.min_max_configured() // return true if min and max are configured
c.save_radio_trim()    // save radio trim to eeprom
2016-05-10 16:21:15 +10:00
skyscraper 134ea338da RC_Channel: remove unused control_mix method 2016-05-05 18:58:17 -03:00
Ricardo de Almeida Gonzaga 5bd034a5a8 Global: start using cmath instead of math.h 2016-04-05 21:06:19 -07:00
Andrew Tridgell 4deb01b8d5 RC_Channel: set AP_PARAM_NO_SHIFT 2016-03-18 12:33:34 +11:00
Andrew Tridgell a07a8aece1 RC_Channel: added pwm_to_angle_dz_trim() 2016-01-06 22:47:21 +11:00
Andrew Tridgell 48b774bc63 RC_Channel: allow more complete separation of input and output of channels
this allows for the type and range of channels to be different on
input and output
2016-01-04 11:23:30 +09:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
2015-12-01 16:28:09 -02:00
Andrew Tridgell 52f2fce1d5 RC_Channel: prevent float exception with bad RCn_MIN/MAX/TRIM
thanks to Michael for finding this
2015-11-30 21:53:54 +11:00
Andrew Tridgell ea5cd99651 RC_Channel: use is_bounded_int32() 2015-11-11 13:45:09 +11:00
Grant Morphett 7edf8c0e0a RC_Channel: New method to detect if channel is in trim location
This is a new method which will return true if an RC_Channel has a PWM
value that is at its TRIM value plus or minus the allowed dead zone
around the TRIM.
2015-11-11 13:39:38 +11:00
Lucas De Marchi 2847af905e RC_Channel: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1 2015-11-04 12:14:13 +11:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Jonathan Challinger 21e7d46944 RC_Channel: use set_default for runtime param defaults 2015-10-26 11:15:54 +11:00
Grant Morphett 122e88dbed RC_Channel: remove the unused test function get_failsafe 2015-09-09 10:28:02 +10:00
Gustavo Jose de Sousa d2780623f7 RC_Channel: standardize inclusion of libaries headers
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
2015-08-11 16:38:25 +10:00
Andrew Tridgell c86ff1ac25 RC_Channel: prevent floating exception on bad MIN/MAX/TRIM values 2015-07-27 12:04:03 +10:00
Randy Mackay 1b13250fd8 RC_Channel: small parameter description change 2015-05-14 10:33:08 +09:00
Andrew Tridgell 6959cdbf15 RC_Channel: fixed usage of _reverse to be consistent
users could set RCn_REV to 0 and get very confusing results
2015-02-18 12:47:56 +11:00
Randy Mackay 73f3b50e2f RC_Channel: make get_control_mid const 2014-11-17 18:16:12 -08:00
Jonathan Challinger 9375fc8947 RC_Channel: add get_control_mid function 2014-11-17 18:16:09 -08:00
Jonathan Challinger 4d7988b302 RC_Channel: replace long with int32_t 2014-11-17 18:16:08 -08:00
Andrew Tridgell 6b0c15b70f RC_Channel: added norm_input_dz()
normalised input, taking into account dead zone
2014-11-18 12:44:05 +11:00
Andrew Tridgell 0d4985079e RC_Channel: added support for LimitValue settings
this allows you to set a channel failsafe or radio_out to a limit
value
2014-04-21 11:52:41 +10:00
Andrew Tridgell 7f4178d967 RC_Channel: added setup_failsafe_trim_all() function
sets all channels to output trim values on FMU failure
2014-04-21 08:37:24 +10:00
Andrew Tridgell 11f196318e RC_Channel: added static functions to simplify operations on all channels
this avoids vehicle code having to loop over all channels for common
operations
2014-04-03 12:18:56 +11:00
Andrew Tridgell 8c0c9c317e RC_Channel: prevent a numerical exception with bad mount parameters 2014-03-26 17:38:27 +11:00
Andrew Tridgell 68462025ba RC_Channel: constrain norm_input() to -1 to 1
if RC is not properly calibrated we could get a value beyond 1, which
could cause some flight modes to exceed the roll/pitch limits of the
aircraft
2014-03-15 20:43:13 +11:00
Andrew Tridgell a788405c8b RC_Channel: added percent_input() function
useful for plane flaps
2014-03-05 09:17:50 +11:00
Andrew Tridgell f6d888e0da RC_Channel: added disable_out() method 2013-12-20 11:58:53 +11:00
Randy Mackay f8e2947823 RC_Channel: parameter @Units to pwm 2013-11-26 22:34:28 +09:00
Andrew Tridgell 97b7130bb9 libraries: update license header to GPLv3
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
2013-08-30 13:01:39 +10:00
Andrew Tridgell a12991923e RC_Channel: prevent overwrite of memory on high RC_Channel constructor 2013-08-18 11:42:23 +10:00
Andrew Tridgell 21859f9364 RC_Channel: fixed dead_zone for range channels
The dead_zone was being used inconsistently, used in PWM space in one
place, and in control output space in another.

The fix required us to move the index number of the RC channel eeprom
value for RCn_DZ, as users will have a throttle deadzone of 3 set in
their eeprom due to a bug that Randy just fixed that caused the value
to always be saved to eeprom. In plane we then need to fix the
deadzone for the throttle to be 30

this fixes issue #303

Thanks to Soren Kuula for spotting this!
2013-07-13 13:18:54 +10:00
Randy Mackay 47437b9ddf RC: set dead zone only if parameter has not been set by user 2013-07-12 11:44:16 +09:00
Andrew Tridgell 02252b5387 RC_Channel: removed reference to dip switches 2013-06-03 17:49:56 +10:00
Andrew Tridgell c0058bbb03 RC_Channel: added output_trim() and read() functions
these make using rcmap in the plane code easier
2013-06-03 16:23:48 +10:00
Andrew Tridgell 0438952a8b RC_Channel: removed global rc_ch[] array
hide it as a object static instead
2013-06-03 16:23:47 +10:00
Andrew Tridgell a093926b04 Revert "RC_Channel: removed pwm_out variable from RC_Channel"
This reverts commit 8e4a003d8d.

It is used by MotorsMatrix
2013-03-29 22:36:29 +11:00
Andrew Tridgell 8e4a003d8d RC_Channel: removed pwm_out variable from RC_Channel
saves 16 bytes
2013-03-29 19:32:52 +11:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles.
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Andrew Tridgell cd430cb6a8 RC_Channel: added no_deadzone version of set_pwm() 2012-12-20 22:41:58 +11:00
Andrew Tridgell ceb3f577d8 libraries: use new math functions 2012-12-20 14:53:22 +11:00
Pat Hickey afa1143506 RC_Channel: ported to AP_HAL
* keeping everyone honest
* remove second unmaintained unit test:  No idea wtf is going on in there.
2012-12-20 14:51:26 +11:00
rmackay9 49619b15dd RC_Channel: move RC_CHANNEL_ANGLE, RANGE, ANGLE_RAW type definitions to .h file so they can be used by the main sketch 2012-12-09 16:42:58 +09:00
Andrew Tridgell 1059ef2a54 Plane: fixed secondary aileron and manual aux servos in failsafe
the servo value wasn't being written to APM_RC while in failsafe for
these aux channels
2012-11-26 23:32:57 +11:00
Andrew Tridgell f58abb7550 RC_Channel: added pwm_to_angle_dz() function
will be used by k_aileron in APM
2012-11-05 23:37:25 +11:00
Andrew Tridgell d57566ad0e RC_Channel: removed set_filter() and scale_output
these unused options were costing 5 bytes per channel, for a total of
50 bytes on ArduCopter
2012-11-05 20:49:42 +11:00
Andrew Tridgell bd31f340a7 RC_Channel: support channel reversal on range channels
this makes it possible to have a reverse throttle in ArduPlane
2012-09-16 15:06:26 +10:00
uncrustify e9fb7cfd92 uncrustify libraries/RC_Channel/RC_Channel.cpp 2012-08-21 19:04:31 -07:00
Andrew Tridgell 518d6365ff AP_Param: update remaining libraries for new constructor syntax 2012-08-08 12:11:57 +10:00
Amilcar Lucas b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas 9c1ac2d9e6 More work on ch9, 10 and 11 2012-08-04 19:44:41 +02:00
Amilcar Lucas bbc4bdb729 More flexible RC support 2012-08-04 18:39:20 +02:00
Amilcar Lucas 3de23220ed RC_Channel parameters: Fix a typo 2012-07-18 22:39:49 +02:00
Amilcar Lucas 724c5f6490 Use ascending order in the values 2012-07-18 02:11:49 +02:00
Amilcar Lucas 1da0ce20ce Improve parameter documentation, it still does not work, but is an improvement.
I just do not understand why these parameters do not appear in Mission planner :(
2012-07-17 23:32:30 +02:00
rmackay9 c3b1a79f6a RC_Channel library: change all "int" types to "int16_t".
Fixes SITL compile error due to type mismatch of set_pwm between .h and .cpp file (this only occurs because on the SITL, "int" is actually "int32_t"
2012-06-02 14:20:58 +09:00
Jason Short c2d14a5cad RC_Channel fix for throttle output.
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
2012-05-31 14:59:03 -07:00
Jason Short 0adb5cb396 Issue 416: RC_Channel – Fix to make dead_zones still output 0 2012-05-31 12:05:47 -07:00
Jason Short 1c690b44de removed never used filter, and fixed a constrain that could make range calcs go bad 2012-05-31 11:45:07 -07:00
Jason Short 862b374d19 Channel rage fix - low output was always 0 vs _low 2012-05-31 11:31:48 -07:00
Jason Short 1e37a0ec17 added a limit to range output 2012-02-18 21:08:17 -08:00
Andrew Tridgell 37cabb4cfa fixed dead zone load/save 2012-02-13 16:22:53 +11:00
Andrew Tridgell 9c5a5473ab added indexes to group info structures 2012-02-13 16:22:52 +11:00
Andrew Tridgell bf4a77da81 convert libraries to new typesafe macros 2012-02-13 16:22:51 +11:00
Andrew Tridgell 12dac42174 modify RC_Channel for AP_Param 2012-02-13 16:22:51 +11:00
analoguedevices 0ea6ecf8d1 Removed outdated comment:
"	// deadzone moved to
		//control_in = (abs(control_in) < _dead_zone) ? 0 : control_in;"
2012-02-11 16:51:02 +00:00
Michael Oborne 8ec192cf45 fix uint > int issue - for hil 2012-02-11 11:35:59 +08:00
Randy Mackay ed19c25a97 Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
Michael Oborne 6b949511ca change rc norm_output to scale evenly across the entire range 2012-01-20 16:24:55 +08:00
Pat Hickey c9f7618ccc purple: rework the RC_Channel library for the APM_RC changes 2011-11-25 20:00:16 -08:00
Michael Oborne d18bb1cc7e prevent div by 0 2011-10-30 21:28:39 +08:00
Jason Short 76bf784f8c RC_Channel Dead zone
Added APVar dead_zone to the RC_Channel library so you could edit it in the Mission planner
Made CH filtering off by default.
2011-10-27 11:34:00 -07:00
Jason Short 326cfef808 Dead Zone fix - Now the range is full instead of clipped. Should make the Yaw much more smooth. 2011-09-26 22:12:39 -07:00
Jason Short ce338071eb RC_Channel tweaks. using Radio_trim rather than 1500 in Raw output. Cleaned up line in calc PWM to be easier to read. 2011-09-21 14:52:20 -07:00
Jason Short cd72e6bea9 roughed in an expo option idea
made min and max values 1100, 1900
removed hard coded init for camera values
2011-09-16 19:06:53 -07:00
Amilcar Lucas 213969202a Moved the RC_Channel_aux class to its own file. The includes could be improved, has anyone got any ideas how ? 2011-09-11 19:13:01 +02:00
Amilcar Lucas c5fd792024 Make the switch case complete 2011-09-11 18:32:24 +02:00
Amilcar Lucas 9f14c5f578 Fix RC range reversal 2011-09-11 04:12:46 +02:00
Amilcar Lucas d84f80cb0d Moved enum values around to make code simpler to read and use 2011-09-11 02:34:47 +02:00
Amilcar Lucas f4998c3673 Moved a function from radio.pde to the RC_Channel_aux library. Now its more readable and reusable 2011-09-10 13:26:29 +02:00
Amilcar Lucas b7a0d8836a This is the real HEAD of the APM_Camera branch. Seams that lots of changes got lost in the SVN to GIT port 2011-09-09 16:18:38 +02:00
jasonshort e05de48e2d Adding reverse to Channel Raw output (unscaled output) to fix camera reversing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3297 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-08 04:58:42 +00:00
jasonshort 150f58a4bd removed scaling on control in because it might cause rounding issues.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2969 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:48:38 +00:00
jasonshort b7b0212506 Cleaned up or reverse code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2842 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 05:54:40 +00:00
jasonshort 8f82de3e11 changed a bool to uint8_t
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2120 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-06 17:51:26 +00:00
jasonshort a67b1d6896 Added new output type AMGLE_RAW - this will ouput non-scaled PWM, better for copters than fixed wings.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2093 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-05 17:46:11 +00:00
jasonshort 29a486c519 removed unused save_trim() function
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-23 05:17:24 +00:00
DrZiplok@gmail.com 1dd50ec263 Use AP_Var to store channel calibration.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1651 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-14 04:43:44 +00:00
deweibel@gmail.com 3443a7817d Add reversing for PWM outputs in angle_to_pwm case.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1566 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-27 18:16:22 +00:00
jasonshort 7dd1b3cbe7 removed EEPROMB references
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1314 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-28 18:42:03 +00:00
jasonshort bf3ee6f843 fixed bug
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1304 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-27 23:03:26 +00:00
jasonshort 68eec6805a update use EEPROM class, new scaled input for RC_Channel
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1264 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-26 01:17:04 +00:00
james.goppert 24bb547eae Added some functionality to RC_Channel to meet APM needs.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1223 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-21 03:53:26 +00:00
jasonshort 718bf566c8 rc range bug fixed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1058 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-06 17:22:05 +00:00
jasonshort 4ef6bd673f added trim save
git-svn-id: https://arducopter.googlecode.com/svn/trunk@980 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-29 01:44:40 +00:00
jasonshort 44f2139951 added filter option
git-svn-id: https://arducopter.googlecode.com/svn/trunk@969 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-28 07:03:23 +00:00
jasonshort 59a3087cb6 added control / nav mixing
git-svn-id: https://arducopter.googlecode.com/svn/trunk@944 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 03:04:30 +00:00
jasonshort dc16a2961d git-svn-id: https://arducopter.googlecode.com/svn/trunk@926 f9c3cf11-9bcb-44bc-f272-b75c42450872 2010-11-25 07:10:06 +00:00
jasonshort 2dd479ea62 almost ready for use, still testing
git-svn-id: https://arducopter.googlecode.com/svn/trunk@905 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-23 21:20:29 +00:00
jasonshort@gmail.com 4fa2491adf This is a new Library for managing RC input channels which will replace the current way of storing RC input in Arrays and most of the Radio.pde tab
git-svn-id: https://arducopter.googlecode.com/svn/trunk@902 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-23 19:28:19 +00:00