Jason Short
4c8e257ea2
ACM : forced setup_show to dump params during log dump for better analysis.
2012-09-10 20:52:30 -07:00
Jason Short
34e07c826f
ACM : Added centralized Iterm logging at a lower rate. Logs all iterms.
2012-09-10 20:26:48 -07:00
Andrew Tridgell
841d2700b6
ACM: use spare CPU cycles to read the magnetometer
2012-09-10 11:38:18 +09:00
rmackay9
fd110a2723
ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU.
...
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
2012-09-10 11:37:53 +09:00
Andrew Tridgell
f97104b435
ACM: use compass.accumulate() in ArduCopter
...
this gives us a much less noisy magnetometer
2012-09-08 10:06:04 +10:00
rmackay9
5073e56c06
ArduCopter: upgraded firmware version to 2.7.3
2012-09-02 12:58:16 +09:00
rmackay9
c9d34c1737
ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2.
...
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
2012-09-02 12:51:23 +09:00
Craig Elder
274b2e2143
Arducopter: Release 2.7.2
2012-08-31 19:18:10 -07:00
Jason Short
082913efd4
ACM : revert back to the 2.6 climb rate calc
...
The current filter is outputting wild oscillations.
2012-08-28 21:22:07 -07:00
Craig Elder
d8a2bfb9e8
Arducopter: Preparing for 2.7.2 Release
2012-08-28 18:30:41 -07:00
Jason Short
9d64bea2ef
ACM: Altitude Adjust
2012-08-28 15:40:08 -07:00
Jason Short
98cc65862d
ACM : Log Timing
2012-08-28 15:40:08 -07:00
uncrustify
4021a64747
uncrustify ArduCopter/ArduCopter.pde
2012-08-21 19:19:50 -07:00
Andrew Tridgell
6d11940ada
AHRS: removed Quaternion build support from APM/ACM/rover
2012-08-22 10:42:21 +10:00
Andrew Tridgell
e9928e78de
ACM: fixed TradHeli build
2012-08-22 09:55:31 +10:00
Robert Lefebvre
575b99b4be
TradHeli: Creating Flybar Acro mode.
2012-08-21 16:54:01 -04:00
rmackay9
75459b09be
ArduCopter: changed reset_throttle_counter to uint8_t to get rid of overflow bug that was preventing target altitude from being locked in after pilot input down throttle.
2012-08-19 11:50:35 +09:00
Jason Short
988d0c98fc
ACM : Alt hold adjustment - made angle boost work during alt hold changes.
...
increased length of delay when reverting to automatic hold to deal with latency of baro sensor
2012-08-18 09:30:46 -07:00
rmackay9
5b6f7f0012
ArduCopter: modified altitude hold so that 1 second slow down period is executed after pilot moves throttle back into deadzone
2012-08-18 21:45:49 +09:00
Jason Short
770956a3fd
ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP
2012-08-16 15:39:50 -07:00
rmackay9
36f947acb9
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Jason Short
a4bc5950cf
ACM: Added a filtered version of Location for GPS lag.
...
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
2012-08-14 14:11:51 -07:00
Jason Short
993c89c4f8
ACM: Revved the version
2012-08-14 14:11:51 -07:00
Jason Short
b01a71c4b9
ACM: Toy mode updates - added second toy mode
2012-08-11 22:37:27 -07:00
Andrew Tridgell
81440a1b09
AHRS: fixed build
...
AP_Airspeed.h is now needed to build AHRS
2012-08-11 12:22:55 +10:00
Jason Short
3ad08b7ffc
ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second.
2012-08-10 10:02:32 -07:00
Jason Short
02649f3f11
ACM : Arducopter.pde
...
command_nav_index upped to in16t for negative number
renamed trim flag > CH7_flag
Added fast_corner var
removed unused alt vars
Alt hold I term update
2012-08-09 16:59:43 -07:00
Amilcar Lucas
0b0b9c29a2
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
Amilcar Lucas
9cc705939a
Add a second mount instance
2012-08-08 23:07:25 +02:00
Andrew Tridgell
fb26160d3b
ACM: change to use get_bearing_cd() instead of get_bearing()
2012-08-08 12:12:30 +10:00
Andrew Tridgell
c2a4d59132
AP_Param: update ArduCopter core for new AP_Param interface
2012-08-08 12:11:57 +10:00
Amilcar Lucas
d9f1140278
ArduCopter: Use generic channel names for AP_Mount servos.
...
This simplifies mission planner, the same code can be used for plane and copter now.
2012-08-06 23:33:51 +02:00
Amilcar Lucas
f14237126a
Add me :)
2012-08-06 00:40:12 +02:00
Amilcar Lucas
107155fa1a
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
Amilcar Lucas
b8c7b8a786
RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls.
2012-08-05 23:08:31 +02:00
Amilcar Lucas
4ba847c449
The mount type must be updated periodically
2012-08-04 18:44:08 +02:00
rmackay9
c091c8e0e6
ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode.
2012-08-01 12:15:02 +09:00
Andreas M. Antonopoulos
de85442c36
AC2.7.1: Updated version and tag
2012-07-31 13:11:17 -07:00
rmackay9
5cb4a88292
ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered)
2012-07-28 23:05:05 +09:00
rmackay9
670a66667f
ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing)
2012-07-28 16:22:35 +09:00
rmackay9
014f5aae99
ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP
2012-07-28 14:21:07 +09:00
Michael Oborne
f4705577c8
AC fix sitl attitude hil build
2012-07-24 21:18:36 +08:00
Andreas M. Antonopoulos
80cf794c86
AC: ArduCopter 2.7 release candidate - updated THISFIRMWARE constant.
2012-07-21 17:52:06 -07:00
Jason Short
b17eb7f768
ACM: Fixed Baro rate patch to work with Sonar and added simple filter
2012-07-21 16:45:00 -07:00
Jason Short
9f6e1347b6
Ardcucopter: RTL distance check update, reset I terms fixed.
2012-07-20 13:27:35 -07:00
Jason Short
2b20c85279
Arducopter: cleanup, skip out of throttle control when flipping.
2012-07-19 22:35:21 -07:00
Jason Short
91062b56af
Arducopter.pde: Increased the throttle Hold altitude control
...
simplified Yaw reset
2012-07-19 17:38:25 -07:00
Jason Short
1efc9eac58
Arducopter: Adjust landing speed
...
removed commented out calc_loiter_pitch_roll calls
Changed updateRTL to use 1m be default instead of wp_radius to avoid poor loiter entry speed.
2012-07-19 09:48:31 -07:00
Jason Short
c9851344e7
Arducopter
...
removed old Var
2012-07-18 22:57:10 -07:00
Jason Short
cb1cdcd4a7
Arducopter: New Alt control code
...
Uses a new method to manage altitude changes. Alt hold controller was split into a hold and a rate controller just like navigation. Changing alt is done by specifying a climb rate.
Interactive alt hold is now simplified and is an 80cm climb or descent.
2012-07-18 22:57:10 -07:00
Jason Short
5965632888
Arducopter: Flip mode
...
Flip mode graduates to pre-compiled option
2012-07-18 22:57:10 -07:00
rmackay9
b691c3f658
ArduCopter.pde: added call to set_manual_rc_channel to allow pilot's channel 6 to control pitch.
...
This initialisation code should be moved to init_ardupilot and/or into the AP_Mount library.
2012-07-18 23:49:09 +09:00
Andreas M. Antonopoulos
a976a59c88
AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling.
2012-07-16 11:46:43 -07:00
rmackay9
c495a5f36e
ArduCopter: added enable_out_ch and output_ch calls for rc_camera_roll, pitch and yaw servos so they actually move
2012-07-15 16:38:28 +09:00
Andreas M. Antonopoulos
c73f7ef3ab
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Jason Short
e3af0c7920
Arducopter: Yaw stop fix
2012-07-14 12:23:10 -07:00
Robert Lefebvre
59e133235f
Implementing Yaw Fix. Tried to blend with Jason's changes.
2012-07-14 00:24:22 -04:00
Jason Short
4af392290b
Circle_WP: Fix for Yaw toward center, fix for transit to Circle WP from a distance
2012-07-13 19:29:36 -07:00
Jason Short
7b746cf5e1
Arducopter: Wrong define used, caused Copter to Yaw to home when flying missions
2012-07-13 12:51:38 -07:00
Jason Short
d8ff5dcfab
Arducopter: Fix circle_WP
2012-07-12 09:22:20 -07:00
Jason Short
293f17902b
Arducopter:Arducopter.pde
...
switched over to barometer.get_climb_rate() * 100
removed +home.alt calcs since home is always 0 altitude
2012-07-10 21:53:38 -07:00
Jason Short
3048d2f9b4
Arducopter: WP_radius
...
Switching to stored WP_radius in meters, just like Arduplane
2012-07-10 21:53:38 -07:00
Amilcar Lucas
dfe0983e1e
Merge the changes from APM_Camera branch into ArduCopter
...
Conflicts:
ArduCopter/Camera.pde
ArduCopter/Parameters.pde
2012-07-11 00:39:13 +02:00
Jason Short
f019d41729
arducopter.pde
...
Timer was set =0 at initialization.
2012-07-09 13:13:32 -07:00
Jason Short
8ccda519fa
Arducopter.pde:
...
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
2012-07-03 17:21:46 -07:00
Jason Short
e0b3309500
Yaw mode:
...
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
2012-07-01 13:40:12 -07:00
Jason Short
c5617eeeac
Arducopter.pde_RTL:
...
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
2012-07-01 13:40:11 -07:00
Jason Short
2e8eee9306
Added code for self centering throttle - disabled by default.
2012-07-01 13:40:11 -07:00
Jason Short
4d6ccccef5
Circle_WP distance check fix
2012-06-29 21:20:28 -07:00
Jason Short
668135ea8b
Arducopter.pde: Added Toy mode refinements
2012-06-29 21:20:27 -07:00
Jason Short
e036bee424
Aeducopter.pde: Toy mode updates
2012-06-29 21:20:27 -07:00
Andrew Tridgell
55092c25a6
SITL: enable the SIM_* parameters in ArduCopter and ArduPlane
2012-06-29 15:10:52 +10:00
Adam M Rivera
dadc7d5a7d
ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work.
2012-06-28 20:34:53 -05:00
Andrew Tridgell
33440567e6
ACM: ArduCopter updates for new compass interface
2012-06-27 16:01:50 +10:00
Andrew Tridgell
dae1a57dc5
ACM: adapt the ArduCopter code for new barometer interface
2012-06-27 16:01:50 +10:00
Andrew Tridgell
b676caa626
ACM: enable GPS in AHRS for ArduCopter
...
this is an experiment in centripetal correction for multicopters
2012-06-27 16:01:49 +10:00
Jason Short
c76ac4543b
Added user editable define for Super simple radius
2012-06-26 10:38:46 -07:00
Jason Short
80d15368bc
Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with.
...
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
2012-06-25 23:08:25 -07:00
Jason Short
6020f6d9fa
Added throttle_min as a user definable param
2012-06-20 14:58:34 -07:00
rmackay9
c62cc4844e
ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release
2012-06-15 00:42:59 +09:00
Jason Short
c42f9ece43
Inertial Control
...
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.
This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.
Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.
The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
rmackay9
e1acf21381
ArduCopter: updated firmware version to 2.6 Epsilon
2012-06-12 23:22:57 +09:00
Jason Short
f5a85d48a0
Added Angel's name to contrib list
2012-06-10 12:38:22 -07:00
rmackay9
aeaebb21d5
ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release)
2012-06-08 21:54:09 +09:00
rmackay9
70b04d9427
ArduCopter: updated firmware description to 2.6 Gamma
2012-06-05 21:28:13 +09:00
Jason Short
1b9f75c844
Updates to Flip:
...
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
2012-06-03 22:15:19 -07:00
rmackay9
72d76558a7
ArduCopter: Ensure update_GPS does nothing when gps is disabled.
...
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
2012-06-03 23:48:45 +09:00
rmackay9
fd6b21d0c7
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 17:02:35 +09:00
rmackay9
4544b37fec
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 16:59:23 +09:00
Robert Lefebvre
5f058fb9b2
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
Jason Short
dec6f0ca62
When RTLing, force home as the final location for loiter.
2012-05-30 11:06:41 -07:00
Jason Short
22065e3f3f
Broken timer - removed
2012-05-29 12:56:38 -07:00
Jason Short
7c6f766251
Speed up automatic disarming to 25 seconds for safety.
...
renamed AUTO_ARMING_DELAY to AUTO_DISARMING_DELAY
2012-05-29 12:41:35 -07:00
Jason Short
f491f5e9ca
Removed references to a takeoff timer
2012-05-29 11:28:40 -07:00
Jason Short
08bf04dd08
pulling throttle low in flight turns out to be more common than thought. Removed clearing of takeoff_complete flag. This is still cleared during disarm which is automatic after 30 seconds of no throttle.
2012-05-29 11:25:04 -07:00
Jason Short
09f4a16bfb
changed the way takeoff complete is figured. Looking for high throttle.
2012-05-29 11:25:04 -07:00
Jason Short
5754f97433
reversed circle_WP calculation so the next_WP refers to the destination around the circle and circle_WP refers to the center. The intent is to make it easier to see via ground station.
2012-05-27 09:21:20 -07:00
Jason Short
7df1aa2914
Arducopter.pde : setting rtl_approach_alt above 1 would force auto landing even if auto-landing was disabled.
2012-05-23 22:00:56 -07:00
Robert Lefebvre
4e4ff84cf1
Updates to CopterLEDS
...
Creation of Nav Blink Function.
2012-05-22 09:58:37 -04:00
Jason Short
f6d8a18182
Added note
2012-05-21 09:58:23 -07:00
Jason Short
8d075015e1
added check for duplicate time-stamped GPS messages.
2012-05-18 09:54:18 -07:00
Jason Short
7e190c6f5c
Arducopter.pde :
...
removed unneeded d_rate_filters
updated Nav routine to handle faster GPS updates
moved calc_XY_velocity to GPS read
added check for duplicate GPS reads
2012-05-17 11:05:05 -07:00
Jason Short
d1cd04486a
removed retro loiter code since Angel has a branch now.
...
shrank speed filter to avoid latency
removed unused forward estimator code
placed code for switchover to gps.groundspeed at 1.5m/s
added clamp for D term when below .5m/s to eliminate noise
added hybrid I-term based on speed error and position
changes Loiter D term to use position rather than acceleration to avoid noise
2012-05-15 22:14:23 -07:00
rmackay9
357d6c2d9b
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
rmackay9
2f74004fcb
ArduCopter: updated version to 2.5.5
2012-05-13 08:47:43 +09:00
Andrew Tridgell
4fee26437b
MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI
2012-04-24 22:24:58 +10:00
Adam M Rivera
b2a7227ae7
ArduCopter/Navigation: Updated code to reference the new g.retro_loiter param instead of the compile define.
2012-04-23 00:19:18 -05:00
Adam M Rivera
97040a7b3a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-23 00:03:37 -05:00
Jason Short
e22832a832
Added a union for casting floats to ints and back when storing Floats to the DataFlash
2012-04-21 15:17:09 -07:00
rmackay9
c993049c48
ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion
2012-04-21 23:24:57 +09:00
rmackay9
3e95ade004
ArduCopter - changed optflow object to be APM2 version if necessary
2012-04-21 20:15:55 +09:00
Adam M Rivera
7d13371acf
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-20 11:45:38 -05:00
rmackay9
f0a9209935
ArduCopter - regressed version back to 2.5.4
2012-04-20 21:58:32 +09:00
Adam M Rivera
c233defbe6
Merge branch 'retro-loiter' of https://code.google.com/r/a432511-wip into auto-approach
...
Conflicts:
Tools/ArdupilotMegaPlanner/Common.cs
2012-04-19 11:08:34 -05:00
Adam M Rivera
24363ccb83
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into retro-loiter
2012-04-19 10:17:36 -05:00
Adam M Rivera
d29f1ef331
Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff.
2012-04-19 10:16:29 -05:00
Adam M Rivera
a7bc3d2cc6
Arducopter.pde: Moved gps to 10hz. Changed calc_XY_velocity to calc_GPS_velocity.
2012-04-18 23:07:35 -05:00
Adam M Rivera
f6d81a16c2
ArduCopter: Added code to prevent mode from switching to APPROACH on every loiter.
2012-04-16 16:29:54 -05:00
Adam M Rivera
56a00fa1f7
ArduCopter: Changed millis compare to use new config value for approach delay.
2012-04-16 14:04:30 -05:00
Adam M Rivera
f9affb3295
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
...
Conflicts:
ArduCopter/Parameters.h
2012-04-16 10:23:01 -05:00
Adam M Rivera
41702aca94
ArduCopter: Updated param name from auto_land_timer to loiter_timer, because it could really be used for more routines like auto-approach. Added timer before approach (20s).
2012-04-16 10:07:57 -05:00
rmackay9
870b5e5f75
ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM
2012-04-16 23:47:57 +09:00
Adam M Rivera
77d6f22864
ArduCopter, commands_logic: Updated logic to allow as low as 5m.
2012-04-15 19:50:05 -05:00
Adam M Rivera
2954bf6f76
ArduCopter: Added check to make sure user defined approach alt is at least 5.
2012-04-15 16:58:22 -05:00
Adam M Rivera
a24b7bcf14
ArduCopter: Added check to g.rtl_approach_alt, which if greater than zero will initiate an approach to the target alt rather than land.
2012-04-15 16:54:43 -05:00
rmackay9
a71ed6abec
ArduCopter - updated firmware version to "2.6 Beta"
2012-04-14 14:26:44 +09:00
rmackay9
24b81db20e
ArduCopter - LEDS - main code to support COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:44 +09:00
rmackay9
54a0709759
ArduCopter - add includes for new AP_Motors classes.
...
Remove global motor_filtered and motor_out arrays.
Removed all global heli variables.
replace "motor_armed" with "motors.armed()"
removed output to rc_4 for tri because this is now handled by AP_MotorsTri class
2012-04-04 22:50:43 +09:00
Andrew Tridgell
c0a54762c6
MAVLink: port the new adaptive flow control to ArduCopter
...
This allows for arbitrary stream rates, and supports flow control if
you are using a 3DR radio
2012-04-02 11:18:53 +10:00
rmackay9
75d7308fb4
ArduCopter - CH6 tuning - changed Roll/Pitch Rate D tuning to use the user supplied tuning range instead of the range / 100.
...
also changed heli_ext_gyro_gain to make it use the tuning range directly.
2012-03-31 09:28:25 +09:00
Andrew Tridgell
0bc604f030
ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE
...
we now have the EEPROM option COMPASS_AUTODEC instead
2012-03-30 14:25:27 +11:00
Adam M Rivera
51b70e4d36
ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM.
2012-03-30 14:25:06 +11:00
rmackay9
0efb0e5b4d
ArduCopter - added CH6_STABILIZE_KD tuning value
2012-03-29 21:09:41 +09:00
rmackay9
599cea21bb
Added multiple new tuning parameters to the inflight channel 6 tuning feature:
...
#define CH6_YAW_KI 24
#define CH6_ACRO_KP 25
#define CH6_YAW_RATE_KD 26
#define CH6_LOITER_KI 27
#define CH6_LOITER_RATE_KI 28
2012-03-28 23:58:58 +09:00
Andrew Tridgell
e956e21e7d
ACM: enable the new compass offset nulling in ACM
2012-03-27 15:37:24 +11:00
rmackay9
67cf7b9eed
ArduCopter - updated firmware version to 2.5.3
2012-03-25 09:13:51 +09:00
rmackay9
63b96c0153
ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter
2012-03-23 23:48:24 +09:00
rmackay9
89576a281a
ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area
2012-03-23 23:12:49 +09:00
rmackay9
1dd554c333
ArduCopter - updated version to 2.5.1
2012-03-20 17:08:18 +09:00
Andrew Tridgell
547b4ed55b
AHRS: adapt ArduCopter for new AHRS framework
2012-03-19 17:29:02 +11:00
Jason Short
c5344a2a85
ACM: Arducopter.pde - Added a constraint to the NO_NAV mode to be similar to the Loiter and rate nav modes.
2012-03-18 22:31:22 -07:00
rmackay9
9841cb0335
ArduCopter - small change to ensure both roll and pitch commands are zero before switching out of loiter_override (loiter override becomes true when roll+pitch command is greater than 5 degrees and switches back to false when both become zero)
...
- remove incorrect comments about when loiter target position is reset.
2012-03-18 15:16:04 +09:00
Jason Short
48a0c9a818
ACM: Small fix to nav_throttle to prevent too fast of a landing.
2012-03-16 14:10:19 -07:00
Jason Short
1c0b28c956
Fixed Scaling bug in Sonar mixing
2012-03-16 14:10:19 -07:00
analoguedevices
86eff20d5d
Rev'ed version number to 2.5. Added more credits
2012-03-15 02:38:54 +00:00
Jason Short
6f8b97bf6a
ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system.
2012-03-13 21:31:16 -07:00
Jason Short
4315c06f34
Lowering the D filter for less latency and less oscillation.
2012-03-13 12:58:46 -07:00
Jason Short
7953808d14
ACM: Larger filter for Loiter D
2012-03-13 10:23:30 -07:00
Jason Short
0ab6b6e592
ACM: Rate_d filter for PID loop of Loiter.
2012-03-11 23:21:49 -07:00
Jason Short
77fe7de55d
ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time.
2012-03-11 23:21:49 -07:00
Andrew Tridgell
2a03a0584f
AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED
...
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
2012-03-11 21:46:41 +11:00
Adam M Rivera
d3667faef4
AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Jason Short
62c2aa4924
ACM: Added Loiter D tuning
2012-03-10 14:17:57 -08:00
Jason Short
0671bb9168
ACM: Firmware rev
2012-03-10 12:45:03 -08:00
Jason Short
29d6085bab
added Force_new_altitude call for alt hold
2012-03-10 12:37:54 -08:00
Jason Short
4ba600c0c5
upped throttle manual boost to 225
2012-03-10 12:37:28 -08:00
Andrew Tridgell
ef771fecdc
ACM: removed a lot of the special case code for quaternions
2012-03-10 10:34:31 +11:00
Andrew Tridgell
69c29d35ce
ACM: change DCM loop to 100Hz
...
On my APM2 quad this seems to give better results
2012-03-10 10:34:31 +11:00
Andrew Tridgell
7e4c8592ff
ACM: make it possible to build ArduCopter with quaternions
2012-03-10 10:34:29 +11:00
Andrew Tridgell
9bff4e2c4c
ACM: only call the fast loop if the imu has new data
...
this prevents us spinning waiting for the sensors to gather some data
2012-03-10 10:34:29 +11:00
Jason Short
486c56ce41
Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class.
2012-03-08 23:13:04 -08:00
Jason Short
730476fdfd
ACM -
...
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
2012-03-06 22:22:14 -08:00
Jason Short
46d7da4d14
Added define for throttle range for altitude changes, updated it to 250
2012-03-05 22:12:53 -08:00
Jason Short
ceef8070ac
added stab_d gain scheduling
2012-02-28 20:16:40 -08:00
Robert Lefebvre
76c3cd88f0
Added heli_collectiveFactor array
...
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
2012-02-28 10:49:28 -05:00
rmackay9
744e5b8c60
ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine)
2012-02-28 22:56:26 +09:00
rmackay9
17d94b61ed
ArduCopter - modified to work with new Filter library
2012-02-28 21:02:44 +09:00
Jason Short
517172ba20
Added Loiter Rate Tuning
2012-02-26 11:33:37 -08:00
rmackay9
8193c786ef
ArduCopter - added #include <Filter.h> to unbreak the build!
2012-02-26 17:05:41 +09:00
rmackay9
69132e0fe7
ArduCopter - change sonar to use new mode filter from Filter library
2012-02-26 15:35:14 +09:00
Jason Short
a924c3685e
Based on Jani's latest logs I've made two tweaks to alt hold.
...
The first is to remove the filter on the throttle output for alt_hold.
The second was to open up the constraint on climb rate. This is to deal with larger than expected disturbances causing altitude changes.
2012-02-25 13:31:21 -08:00
Andrew Tridgell
e2bbc795ad
ACM: use a NULL gps pointer in DCM init
...
current DCM API does need a GPS reference passed in, but it can be
NULL
2012-02-25 15:08:49 +11:00
Andrew Tridgell
698749dd92
ACM: don't pass a gps pointer to DCM
...
after discussion with Randy, we don't want ArduCopter to fall back to
GPS for yaw when the compass becomes unhealthy. So we shouldn't pass
the gps object to the DCM code at all.
2012-02-25 14:51:08 +11:00
Andrew Tridgell
1cd3172954
ACM: ensure update_trig() doesn't cause NAN values for cos_roll/cos_pitch
...
the DCM matrix could have a value over 1.0 for c.x due to rounding
errors
2012-02-24 11:52:55 +11:00
Jason Short
242f54793c
revved a version
2012-02-22 09:00:42 -08:00
Jason Short
729c824809
made timer unsigned
2012-02-21 21:49:03 -08:00
Jason Short
30efbae0e9
removed old comments
2012-02-19 14:21:27 -08:00
Jason Short
cae49b3543
Added "slow WP" option for RTL.
2012-02-19 13:11:59 -08:00
Jason Short
b54d08f410
Updated manual throttle control during throttle hold
2012-02-19 12:40:51 -08:00
Randy Mackay
e146f225b1
ArduCopter - remove unnecessary block for next GPS value before saving home location
2012-02-19 15:38:40 +09:00
Jason Short
028de5d2c5
Axis lock beta (off by default)
2012-02-18 21:16:19 -08:00
Randy Mackay
b64c0da003
ArduCopter - updated version to 2.4
2012-02-18 18:44:29 +09:00
Jason Short
b532cb91b1
added Rate_D tuning value
2012-02-17 15:23:59 -08:00
Jason Short
0075901f77
upped rate loop to 250hz
2012-02-17 15:23:59 -08:00
Jason Short
36a120d8df
removed some unused vars,
...
formatting, made loop speed same as PIDT1 to eliminate variable.
2012-02-16 22:09:21 -08:00
Jason Short
e8b6f5ecee
allow auto-land if failsafe is triggered
2012-02-15 10:53:54 -08:00
Jason Short
e249c8466d
AP slew rate
2012-02-15 09:10:15 -08:00
Jason Short
05abe44f32
Added range setting via a parameter for CH6 tuning
2012-02-15 09:10:14 -08:00
Jason Short
c9b432955d
removed unused Vars
2012-02-13 15:25:23 -08:00
Andrew Tridgell
d4305e0ae2
fixed apm2beta build with AP_Param
2012-02-13 16:22:52 +11:00
Andrew Tridgell
3b4cae3cc3
adapted main ACM code for AP_Param
2012-02-13 16:22:52 +11:00
Jason Short
2c65fc9ddf
Cosmetic tweaks for tuning
2012-02-11 15:29:11 -08:00
Jason Short
b1d52da431
reset Rate_I for takeoff
2012-02-10 22:50:56 -08:00
Jason Short
19ab0f481e
made Yaw work like Roll and Pitch
2012-02-10 22:32:55 -08:00
Jason Short
4313d19bc5
2.3.1v
2012-02-09 22:22:01 -08:00
Jason Short
f40d40b0f9
Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that.
2012-02-09 22:22:00 -08:00
Jason Short
ef9418c2de
fix issue with low throttle in air
2012-02-03 13:29:59 +00:00
analoguedevices
3288b518c0
credits
2012-02-01 04:44:36 +00:00
analoguedevices
6dbcac855a
Incremented version number to 2.3
2012-02-01 04:39:15 +00:00
Jason Short
5934b503b8
tuning fixes
2012-01-30 21:13:03 -08:00