Nick Exton
3ba63d33d5
GCS_MAVLink: Add handler for CAMERA_CAPTURE_STATUS request
2023-11-09 13:00:57 +09:00
Nick Exton
2f9b9e2452
AP_Camera: Add Camera_Mount handler for CAMERA_CAPTURE_STATUS request
2023-11-09 13:00:57 +09:00
Nick Exton
ac313b6d7a
AP_Mount: Add handler for CAMERA_CAPTURE_STATUS request
2023-11-09 13:00:57 +09:00
Nick Exton
477534b446
AP_Camera: Add handler for CAMERA_CAPTURE_STATUS request
2023-11-09 13:00:57 +09:00
Henry Wurzburg
ba76d4e2f9
hwdef:save flash on FlywooF405S-AIO
2023-11-09 12:49:13 +11:00
Peter Barker
1f47856fbb
AP_EFI: remove unused definitions
2023-11-09 09:37:13 +11:00
Andrew Tridgell
7b6ad15f90
hwdef: make f103-QiotekPeriph a single compass
...
dual compass periph is not supported
2023-11-08 18:34:41 +11:00
Andrew Tridgell
598e2b0762
AP_Compass: remove more exposed params for periph
...
these parameters are not useful on peripherals which use raw mag field
2023-11-08 18:34:41 +11:00
Jonathan Loong
5e61e4cdc5
AP_BattMonitor: Addition of AD7091R5 ADC I2C Read Driver
...
This is an ADC extender based on I2C which is used to read the current and voltage. Enable AD7091R5 in config.h which was reserved previously
2023-11-08 18:24:41 +11:00
Peter Barker
abf32906d2
GCS_MAVLink: support gripper commands as both long and int
2023-11-08 18:15:25 +11:00
Peter Barker
09ab14c69f
GCS_MAVLink: handle battery reset as both long and int
2023-11-08 18:14:27 +11:00
Peter Barker
d2a3fed4a1
hwdef: AP_BATTERY_ESC_ENABLED needs HAL_WITH_ESC_TELEM
2023-11-08 18:05:55 +11:00
Peter Barker
2d9346e85a
AP_GPS: correct uBlox M10 configuration on minimised boards
2023-11-08 09:05:13 +11:00
Henry Wurzburg
57df565176
RC_Channel: expand explanations in FWD THR docs
2023-11-07 10:57:04 +11:00
Peter Barker
1d08900cb0
GCS_MAVLink: handle MAV_CMD_DO_SPRAYER as both long and int
2023-11-07 10:55:46 +11:00
Ryan Friedman
9445cb2672
AP_GPS: Expose COM port and Output Rate in header
...
* This removes magic numbers of hard coding the hardware port and output
rate
* This also fixes configuring the incorrect hardware port
* Now, COM2 (TTL) is configured for GSOF output
* The data rate remains the same as before
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-07 10:42:14 +11:00
Peter Barker
9285188d85
GCS_MAVLink: handle DO_ADSB_OUT_IDENT as both long and int
2023-11-07 10:32:39 +11:00
yjuav
f7dd6dec96
hwdef: add YJUAV_A6SE_H743 board support
2023-11-07 10:31:20 +11:00
Peter Barker
6368ec4bd5
AP_ADSB: adjust MAVLink backend to use Loc _my_loc
2023-11-07 10:30:04 +11:00
Peter Barker
b3ff88c519
AP_ADSB: avoid using GPS and RTC libraries in backend
...
instead, add fields to canonical AP_ADSB location "_my_loc" to hold all of the information backends might want. This will allow consistent presentation of data regardless of backend type, and for the sources of the information to change more easily.
2023-11-07 10:30:04 +11:00
Peter Barker
e47a5c1ea9
AP_GPS: make AP_GPS_FixType enum class
...
Don't want "NONE" in the global namespace
2023-11-07 10:30:04 +11:00
Iampete1
ae2ab08b1f
AP_Scripting: add bindings for fence
2023-11-07 07:52:14 +11:00
Randy Mackay
ff3925a0fd
AP_Scripting: mount-poi displays startup message
...
Also remove out-of-date-comments
2023-11-07 07:47:53 +11:00
Randy Mackay
3bface980d
AP_Scripting: mount-poi supports locking mount to Location
2023-11-07 07:47:53 +11:00
Peter Barker
3411b85b71
AP_TempCalibration: add and use AP_TEMPCALIBRATION_ENABLED
2023-11-07 07:46:24 +11:00
olliw42
4ffdb65288
AP_Mount: gimbal_manager_set_pitchyaw is not a command
2023-11-06 08:32:04 +09:00
Andrew Tridgell
c1831bae32
AP_Scripting: added HobbyWing DataLink lua driver
2023-11-06 07:12:35 +11:00
Andrew Tridgell
96f5a1cb2b
AP_Scripting: added bindings for telemetry data for ESCs
...
allows more complete ESC protocol implementation in scripting
2023-11-06 07:12:35 +11:00
Iampete1
66b8fd95ad
AP_Scripting: add binding for GCS last seen time
2023-11-04 19:10:36 +11:00
Andrew Tridgell
369f369f1d
AP_Mount: fixed SIYI parser bug
...
this caused lots of lost packets
2023-11-03 22:44:03 +09:00
Ryan Friedman
6273fee892
AP_GPS: Rename GSOF packing functions
...
* Added docs for why they exist
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-03 13:25:39 +11:00
Andrew Tridgell
1bf7c9ee77
AP_ESC_Telem: added stale() method for ESC telem
...
prevents use of stale data when close to zero time
2023-11-03 08:08:31 +11:00
Andrew Tridgell
b79e96ab57
Filter: protect against extremely low notch filter frequencies
...
an incorrectly configured ESC telemetry source can lead to a notch
running at very low frequencies. A simple example is a lua script like
this:
function update()
esc_telem:update_rpm(12, 0, 0)
return update, 10
end
return update()
where motor 12 is unused.
with that script in place we get a 1.0078 Hz filter which leads to
massive phase lag and a crashed aircraft
this is a safety protection. We should also try to find out why the
INS_HNTCH_FREQ lower limit is not working
2023-11-03 08:08:31 +11:00
Randy Mackay
73589a276e
AP_Camera: camera_fov_status includes field-of-view
2023-11-02 21:23:12 +09:00
jfbblue0922
7d4d2f98bf
AP_HAL_ChibiOS: corrected analog input pin number
2023-11-02 19:08:09 +11:00
bugobliterator
fb26bbfc4c
AP_DroneCAN: add support for detecting downed link
2023-11-02 15:55:21 +11:00
Asif Khan
8a791d6082
GCS_MAVLink: add SEND_FOV_STATUS support
2023-11-02 15:54:37 +11:00
Asif Khan
2235a8e063
AP_Camera: add send_camera_fov_status support
2023-11-02 15:54:37 +11:00
Asif Khan
eb5ead462b
AP_Mount: add get_poi
...
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2023-11-02 15:54:37 +11:00
Asif Khan
11e541f123
AP_Terrain: add get_grid_spacing accessor
2023-11-02 15:54:37 +11:00
Peter Barker
0e2261832e
autotest: more test for emitted digicam command-long messages
2023-11-02 15:54:13 +11:00
Peter Barker
187ae07225
GCS_MAVLink: handle camera messages as COMMAND_INT as well as COMMAND_LONG
2023-11-02 15:54:13 +11:00
Peter Barker
685bdd3d3d
AP_Camera: handle camera messages as COMMAND_INT as well as COMMAND_LONG
2023-11-02 15:54:13 +11:00
Peter Barker
fbe690d44b
SITL: track simulated ADSB vehicles relative to simulation origin
...
removes dependence on ArduPilot AHRS library
Also removes vehicles based off vehicle simulated position rather than distance-from-origin, so you always have company
2023-11-02 15:52:42 +11:00
Peter Barker
c953b4e512
AP_HAL_SITL: track simulated ADSB vehicles relative to simulation origin
...
removes dependence on ArduPilot AHRS library
Also removes vehicles based off vehicle simulated position rather than distance-from-origin, so you always have company
2023-11-02 15:52:42 +11:00
Peter Barker
9087bb6b89
AP_HAL: track simulated ADSB vehicles relative to simulation origin
...
removes dependence on ArduPilot AHRS library
Also removes vehicles based off vehicle simulated position rather than distance-from-origin, so you always have company
2023-11-02 15:52:42 +11:00
Peter Barker
9d9b95af15
GCS_MAVLink: correct mavlink result when airspeed not available
...
only in progress if we have started a task running
2023-11-02 15:52:30 +11:00
Peter Barker
4ec80076a1
SITL: correct bit for enabling MXS simulation
2023-11-02 15:52:17 +11:00
Peter Barker
c06a759710
AP_HAL_SITL: create and use ADSB sim when mxs simulator is in play
2023-11-02 15:52:06 +11:00
Gone4Dirt
3edaea9be9
AP_GPS: Remove GPS_TC_BLEND
2023-11-02 15:51:52 +11:00
bugobliterator
5bd5aa87a7
AP_HAL_ChibiOS: add CubeNode pinout diagram
2023-11-01 14:18:02 +00:00
Peter Barker
37109e649e
AP_ADSB: create an enum class for logging
2023-11-01 23:11:05 +11:00
Peter Barker
e162e74c0c
GCS_MAVLink: allow MAV_CMD_RUN_PREARMS as both long and int
2023-11-01 19:30:44 +11:00
Peter Barker
26e6a11ba3
AP_RangeFinder: remove more code based on defines
2023-11-01 19:29:48 +11:00
Andy Piper
2bef8f2cad
AP_HAL_ChibiOS: add support for SpeedyBeeF405v4
2023-11-01 19:25:19 +11:00
Iampete1
1bfe83bb63
AP_Logger: log rally point flags field
2023-11-01 19:06:39 +11:00
Iampete1
cd621f0503
AP_Rally: add alt_frame to unused flag bits
2023-11-01 19:06:39 +11:00
Iampete1
d25d1c253e
GCS_MAVLink: MissionItemProtocol_Rally: deal with alt frame
2023-11-01 19:06:39 +11:00
Ryan Friedman
245149ded4
AP_ExternalControl: Add WARN_IF_UNUSED
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2023-11-01 18:30:54 +11:00
Randy Mackay
e3e111ae8b
AP_Mount: Servo get_attitude_quat fix
2023-11-01 18:16:55 +11:00
Willian Galvani
d33facd884
AP_HAL_Linux: add newline and remove stray semicolon
2023-10-31 20:34:24 -03:00
Michael du Breuil
f1b6a7d586
APM_Control: Allow autotune level 0 to actually reach the lowest entries of the autotune level table
2023-10-31 11:42:27 +11:00
Henry Wurzburg
4b4c6e8696
AP_Scripting:add README file to examples directory
2023-10-31 11:33:08 +11:00
Peter Barker
78475cad5c
GCS_MAVLink: handle FLASH_BOOTLOADER as command-long and command-int
2023-10-31 11:32:32 +11:00
Peter Barker
afd85c8613
GCS_MAVLink: handle MAV_CMD_START_RX_PAIR as both int and long
2023-10-31 11:18:57 +11:00
Iampete1
069507c48e
AP_Scripting: fix easy lua check issues in examples
2023-10-31 11:11:52 +11:00
Andrew Tridgell
aaa4e0268a
AP_BattMonitor: cope with InfoAux without nominal voltage
...
allows for reset of remaining charge from GCS or lua
2023-10-31 11:09:51 +11:00
Andrew Tridgell
532ab09c72
AP_BattMonitor: added option allowing InfoAux to be from different node
...
this allows the CAN node providing cell voltages to be a different CAN
node from the node providing the base current/voltage
2023-10-31 11:09:51 +11:00
Andrew Tridgell
7ce9febf9f
AP_BattMonitor: use a reference for AP::battery()
...
saves a small amount of flash
2023-10-31 11:09:51 +11:00
Willian Galvani
60a38a0ab1
AP_HAL_Linux: set bw_in_bytes_per_second default to 10/100Mbps connection
2023-10-31 11:00:28 +11:00
Willian Galvani
b3f2945dcb
AP_HAL_SITL: set bw_in_bytes_per_second to 10/100Mbps connection
2023-10-31 11:00:28 +11:00
Andrew Tridgell
b86774789b
AP_BoardConfig: detect Holybro 6X Rev6
2023-10-31 10:42:25 +11:00
Andrew Tridgell
cd3eab3c5d
hwdef: support Holybro Pixhawk6X_Rev6
2023-10-31 10:42:25 +11:00
Andrew Tridgell
6173726846
HAL_ChibiOS: fail on badly formed SPIDEV line
2023-10-31 10:42:25 +11:00
vzarkar
04c5c336b8
AP_Scripting: add note to miision_load.lua about file locations
...
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2023-10-31 10:40:34 +11:00
Iampete1
97101b6bd0
TECS: move to new `using_airspeed_sensor` ahrs method
2023-10-31 10:39:21 +11:00
Iampete1
19b263a220
AP_AHRS: check the health of the airspeed sensor that is being used
2023-10-31 10:39:21 +11:00
Randy Mackay
a477bf609e
AP_Winch: pos control user output fix
2023-10-31 10:37:45 +11:00
Randy Mackay
3659fb633e
AP_Winch: fix daiwa unknown spelling
2023-10-31 10:37:45 +11:00
Randy Mackay
1c691c8fab
AP_OpenDroneID: fix comment typo
2023-10-31 10:37:45 +11:00
Andrew Tridgell
422d7cec6e
AP_Compass: probe DroneCAN compasses before I2C
...
it is highly likely that a user with a DroneCAN compass will want it
to be earlier in the dev list than i2c or spi compasses
2023-10-31 10:14:42 +11:00
Andrew Tridgell
36de6613fb
AP_Compass: split out probing code into i2c+spi and DroneCAN
...
this is a NFC to make the PR clearer
2023-10-31 10:14:42 +11:00
Andrew Tridgell
9fc9238c53
AP_Compass: prevent saving of device IDs when not calibrated
...
this fixes an issue with the following sequence:
- new board (or board with FORMAT_VERSION reset) starts up with only internal compasses
- internal compasses are detected and devids saved
- an external compass is added and the board is rebooted
- the external compass will not be the first compass
- user then calibrates and flies, but has internal as primary
this can lead to a very bad experience for new users. At least one
vehicle has crashed due to this sequence.
The fix is to not save device IDs during the Compass::init() if we
have never been calibrated. This means that when an external compass
is added it will come up as the first compass.
This also removes the saving of the extra device ID. It was never
intended that these be saved (there is a comment to that effect in the
code), but actually they were saved.
2023-10-31 10:14:42 +11:00
Andrew Tridgell
aaeee2e7dc
AP_Compass: implement SIM_MAG_SAVE_IDS
2023-10-31 10:14:42 +11:00
Andrew Tridgell
f7a1227c25
SITL: added SIM_MAG_SAVE_IDS
...
this controls whether SITL saves device IDs for compasses on startup
so the compasses always appear calibrated
2023-10-31 10:14:42 +11:00
Peter Barker
9dbd6f335a
hwdef: minimize_features on mini-pix, not minimize_fpv_osd
2023-10-31 09:13:01 +11:00
Nick Exton
5b28086131
AP_Mount: Remove handler for DO_SET_ROI_NONE
2023-10-30 08:28:23 +09:00
Nick Exton
57cead9052
GCS_MAVLink: Make handler for DO_SET_ROI_NONE common
2023-10-30 08:28:23 +09:00
muramura
abf4cd573e
AP_RangeFinder: Remove unnecessary whitespace(NFC)
2023-10-30 07:16:54 +09:00
Andrew Tridgell
483d19f44c
AP_InertialSensor: apply stuck gyro fix to all IxM42xxx sensors
...
TDK has confirmed this applies to all IxM42xxx sensors
2023-10-29 08:24:04 +11:00
Nicholas Ionata
8b4bc0e077
AP_Mission: correct incorrect comment about method reutrn value
...
The comment for the AP_Mission::clear method had an incorrect claim as to the return value
2023-10-28 10:14:50 +02:00
Henry Wurzburg
dfdd1492ff
AP_ICEngine:update OPTIONS metadata
2023-10-28 15:30:31 +11:00
Henry Wurzburg
e474305c6d
hwdef:free flash for space critical bds
2023-10-28 13:32:19 +11:00
Rhys Mainwaring
33f122146e
AP_DDS: revert change that removed namespace for TF subscriber topic
...
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2023-10-28 10:31:46 +11:00
Peter Barker
b5edc4c757
GCS_MAVLink: correct use of AP_MAVLINK_MSG_RELAY_STATUS_ENABLED define
2023-10-27 14:16:47 +11:00
Peter Barker
9c759c3e61
AP_HAL: move AP_BOOTLOADER_FLASHING_ENABLED default to AP_HAL
...
.... need the defines on HALs other than ChibiOS
2023-10-27 14:16:47 +11:00
Peter Barker
f70a510c6b
AP_HAL_ChibiOS: move AP_BOOTLOADER_FLASHING_ENABLED default to AP_HAL
...
.... need the defines on HALs other than ChibiOS
2023-10-27 14:16:47 +11:00
Peter Barker
2ac9cc94c6
GCS_MAVLink: correct compilation if rangefinder disabled
2023-10-27 14:16:47 +11:00
Peter Barker
fbbadecfe3
GCS_MAVLink: tidy use of GPS mavlink defines
2023-10-27 14:16:47 +11:00
Peter Barker
1c7eebec3a
GCS_MAVLink: tidy proximity message handling
2023-10-27 14:16:47 +11:00
Peter Barker
306caae6e5
GCS_MAVLink: tidy OSD param message handling
2023-10-27 14:16:47 +11:00
Peter Barker
1f0ae343b1
GCS_MAVLink: tidy ADSB message handling
2023-10-27 14:16:47 +11:00
Peter Barker
c1f0c9e70a
GCS_MAVLink: tidy CAN message handling
2023-10-27 14:16:47 +11:00
Peter Barker
0f6718b23d
GCS_MAVLink: remove FLASH_BOOTLOADER commandd if not compiled in
...
removes handling of MAV_CMD_FLASH_BOOTLOADER if AP_BOOTLOADER_FLASHING_ENABLED is disabled
Side-effect of correcting the mavlink result code in that case.
2023-10-27 14:16:47 +11:00
Peter Barker
d665d2c56e
GCS_MAVLink: save bytes when AP_AIS_ENABLED is false
2023-10-27 14:16:47 +11:00
Peter Barker
e55799c8d8
AP_RangeFinder: correct use of AP_RANGEFINDER_LUA_ENABLED
...
new, separate define to AP_SCRIPTING_ENABLED use was incomplete
2023-10-27 14:16:47 +11:00
Peter Barker
90607ffa5f
hwdef: remove payload place from minimized boards
2023-10-27 14:15:53 +11:00
Peter Barker
5a65632a2d
AP_Mission: allow payload place to be compiled out of code
2023-10-27 14:15:53 +11:00
Peter Barker
ba72b7edfd
hwdef: fix speedybeef4v3 build
...
double-definition
2023-10-26 18:15:30 +11:00
Peter Barker
8e5708b6f2
speedybeef4: remove redefinition of AP_BATTERY_SYNTHETIC_CURRENT_ENABLED
2023-10-26 18:15:30 +11:00
Peter Barker
f5045384cf
hwdef: correct ReaperF745 build
2023-10-26 18:15:30 +11:00
Peter Barker
b757319245
hwdef: fix KakuteF4Mini build
...
redefinition
2023-10-26 18:15:30 +11:00
Peter Barker
38db3d8cbc
hwdef: fix F35Lightning build
...
.... and remove redundantdefine
2023-10-26 18:15:30 +11:00
Peter Barker
e85f843c5d
CS_MAVLink: tidy use of AP_BATTERY_ENABLED defines
...
remove entire functions rather than just their content
2023-10-26 13:23:57 +11:00
Peter Barker
2412ba495d
GCS_MAVLink: remove handling of PREFLIGHT_SET_SENSOR_OFFSETS
...
This was the old offboard-calibration code.
We've checked MAVProxy, QGC and MissionPlanner and they're not using this code.
The onboard calibration stuff is better.
2023-10-26 13:19:59 +11:00
Peter Barker
740b939aa5
GCS_MAVLink: handle control-high-latency as both long and int
2023-10-26 13:19:29 +11:00
Michael du Breuil
45786a33e6
AP_Arming: Do not send a status text on state change
2023-10-25 09:39:51 -07:00
Iampete1
83a31ac371
AP_Compass: add big comment explaining calculate_heading maths, add consts and use wrap_PI helper
2023-10-25 15:57:16 +01:00
Peter Barker
fd67c71eb0
SITL: add Sagetech MXS simulator
2023-10-25 20:06:47 +11:00
Peter Barker
6d1d9df875
AP_HAL_SITL: add Sagetech MXS simulator
2023-10-25 20:06:47 +11:00
Andy Piper
9ba9553d96
AP_HAL_ChibiOS: NFC refactor of dshot/bdshot in preparation for bdshot on iomcu
2023-10-25 19:30:35 +11:00
Andy Piper
7ca2a4da56
AP_InertialSensor: remove ICM42xxx defaults
2023-10-25 19:23:11 +11:00
Andrew Tridgell
2688848cd1
AP_InertialSensor: fixed orientation of batch sampled data
...
we need to rotate the data so that FFT displays match the configured
orientation
2023-10-25 19:23:11 +11:00
Andrew Tridgell
0ebf9e7af5
AP_InertialSensor: pre-fetch instances for use in filter setup
...
we use the instance numbers during filter configuration to check if
fast sampling is enabled. We need to ensure these instance numbers
have been setup before the filtering functions get called
2023-10-25 19:23:11 +11:00
Andy Piper
a9e0bf070c
AP_InertialSensor: ensure indirect registers are not modified with sensors active on ICM-42688
2023-10-25 19:23:11 +11:00
Andy Piper
da0b1402d3
AP_InertialSensor: add high-resolution reads for ICM45686
...
enable high-resolution support on all ICM4xxxx sensors
create INS_HIRES_SAMPLE mask
adjust high-resolution sampling for correct byte ordering and depth
correct high resolution scaling on 18bit ICM4xxxx IMUs
control highres via HAL_INS_HIGHRES_SAMPLE
2023-10-25 19:23:11 +11:00
Andy Piper
fee43af729
AP_HAL_ChibiOS: enable highres sampling on CubeOrangePlus
2023-10-25 19:23:11 +11:00
Peter Barker
b86c5b7eea
hwdef: remove unused HAL_NO_LOGGING define from hwdefs
2023-10-25 19:17:18 +11:00
Peter Barker
28e89505fe
hwdef: remove redundant HAL_GCS_ENABLED lines
2023-10-25 19:17:18 +11:00
Rhys Mainwaring
d82f3e9591
AP_DDS: use TopicIndex enum to index topics table
...
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2023-10-25 10:04:14 +11:00
rishabsingh3003
5db60eb9ac
AP_RangeFinder: Allow new Maxsonar I2C reading even if reading fails
2023-10-25 10:03:54 +11:00
rishabsingh3003
de61ac3055
AP_RangeFinder: Parse signal strength and status for TOFSenseFI2c
2023-10-25 10:03:54 +11:00
rishabsingh3003
9a02967e3d
AP_RangeFinder: Add NoopLoop TOFSenseF I2c driver
2023-10-25 10:03:54 +11:00
Andrew Tridgell
030dfe2fa1
SITL: use AP_BUILD_ROOT
2023-10-25 09:50:08 +11:00
Andrew Tridgell
04bbe648e6
HAL_SITL: use AP_BUILD_ROOT
2023-10-25 09:50:08 +11:00
muramura
dc95121b15
AP_DDS: Aggregate message
2023-10-25 09:49:49 +11:00
Peter Barker
6152059843
hwdef: rearrange FlyingMoonH743 IMU order
2023-10-25 09:47:43 +11:00
Peter Barker
782b51b89b
hwdef: rearrange FlyingMoonF427 IMU order
2023-10-25 09:47:43 +11:00
Michael du Breuil
3a711b49e2
AP_Mission: Support disarmed starts in engine control
2023-10-24 14:11:39 -07:00
Michael du Breuil
9486bf2b9c
AP_ICEngine: Add a flag to allow starting the engine while disarmed
2023-10-24 14:11:39 -07:00
Andrew Tridgell
a190dfe24a
AP_Scripting: added get_cell_voltage() API and arming check example
...
this allows for cell imbalance to be checked as an arming check using
a lua script
2023-10-25 07:31:24 +11:00
Andrew Tridgell
4d821b2c91
AP_BattMonitor: added get_cell_voltage() for scripting
2023-10-25 07:31:24 +11:00
Tom Pittenger
4dc9d1ebc7
AP_HAL_ChibiOS: enable scripting on CubeOrange-periph-heavy
2023-10-23 22:44:35 -07:00
Peter Barker
21eaa08333
GCS_MAVLink: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in
2023-10-24 12:59:19 +11:00
Peter Barker
0b04f765d4
GCS_MAVLink: factor out a virtual mav_frame_for_command_long method
2023-10-24 12:59:19 +11:00
Henry Wurzburg
5c546dedcb
hwdef:include minimal in minimize_common
2023-10-24 12:20:41 +11:00
Andy Piper
51793ef5ca
hwdef: bugfixes for BETAFPV-F405
2023-10-24 11:44:54 +11:00
Peter Barker
25846eb2bc
GCS_MAVLink: handld MAV_CMD_DO_FENCE_ENABLE as both long and int
2023-10-24 11:37:18 +11:00
Martin Luessi
0970cb29c7
AP_HAL_ChibiOS: RADIX2HD Probe external I2C compasses
2023-10-24 10:44:57 +11:00
Mark Agate
31bc321b70
AP_TECS: log SKE weight since both weights are now [0,1]
2023-10-24 10:44:12 +11:00