Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
57,303 Commits 71 Branches 509 Tags 772 MiB
Commit Graph

319 Commits

Author SHA1 Message Date
Samuel Tabor 589382cbb4 Plane: Add THERMAL mode to Parameters.cpp metadata. 2020-09-25 11:34:48 -07:00
Samuel Tabor 10111f92d5 Plane: Rename SOARING_ENABLED to HAL_SOARING_ENABLED and don't compare to ENABLED. 2020-09-24 07:30:48 +10:00
Peter Barker 15372e9213 ArduPlane: replace '@User: User' with '@User: Standard' 2020-09-22 14:56:04 +10:00
Andy Piper c057be8ed1 Plane: conditionally compile ADSB support 2020-09-22 09:33:51 +10:00
Tom Pittenger db10ad2e54 Plane: update USE_REV_THR param description to include landing pattern 2020-09-17 07:31:43 -07:00
Hwurzburg 96f5e2a20a Plane: Update THR_FAILSAFE param metadata 2020-09-04 07:08:03 +10:00
Siddharth Purohit fb180fa431 Plane: move to using CANManager library 2020-08-19 17:31:09 +10:00
Andrew Tridgell 3c705d1c60 Plane: added THR_FAILSAFE=2 option 
this allows for RC inputs to be ignored at low throttle, but won't
trigger failsafe. It is meant for users flying BVLOS missions, where
they want GCS failsafe enabled, but don't want RC failsafe, and want
to be sure that RC inputs will be ignored at low RC throttle values

Thanks to suggestion from Pompecukor
 2020-08-07 14:01:20 +10:00
Andy Piper b649afe9e5 Plane: make mount/gimbal inclusion configurable per-board 2020-08-04 09:18:14 +10:00
Samuel Tabor 419f7c9998 Plane: Convert SOAR_ENABLE_CH to RCX_OPTION. 2020-07-21 09:38:04 +10:00
Paul Riseborough 97d7d563c4 ArduPlane: Improve parameter description for FWD_BAT_VOLT_MAX/MIN 2020-06-16 10:17:33 +10:00
vierfuffzig 147ebb74f4 Plane Parameters: fix THR_MAX param description 
makes clear that thr is constrained in stabilized modes too unless passthrough is set, aligns with THR_MIN description.
 2020-06-12 10:23:41 +10:00
Buzz 0f5177b291 Plane: Support a set of offboard MAVLink guided controls with rates 
+ 3 rounds of fixes
 2020-05-20 15:03:21 +10:00
Andrew Tridgell 8b21f5117a Plane: implement RTL_CLIMB_MIN parameter 
this allows for an initial climb on RTL where roll is limited to
LEVEL_ROLL_LIMIT
 2020-05-18 13:04:04 +10:00
Paul Riseborough 40cc5a5006 ArduPlane: Improve EKF failsafe in VTOL modes 
Replicates Copter behaviour with a three step process if the EKF sustains a loss of navigation as detected by high GPS innovation test ratios:

1) Attempts a yaw reset using the GSF estimate if available
2) Attempts a lane switch
3) Falls back to a non-position mode
 2020-05-14 10:40:48 +10:00
Peter Barker 8222b5db62 Plane: AP_Soaring no longer takes AHRS in constructor 2020-05-05 17:35:14 +10:00
Iampete1 3ded030fa8 Plane: compensate forward throttle for battery voltage drop 2020-05-05 09:46:41 +10:00
Michael du Breuil 37be15b3cd Plane: When stick mixing is disabled do not apply stick mixing to quadplane modes 2020-04-04 10:12:22 +11:00
Rishabh 30fd915312 Plane: Update CRASH_DETECT param 2020-02-25 11:02:43 +11:00
Peter Barker 19bc60b690 Plane: correct missing EFI parameter docs 2020-02-18 13:28:03 +11:00
Peter Barker e358677f85 Plane: allow NavEKFs to be compiled out 2020-01-21 11:53:18 +11:00
Peter Barker 9364181772 Plane: EKF objects have moved into AP_AHRS_NavEKF 2020-01-21 11:53:18 +11:00
Andrew Tridgell a90c16e60e Plane: update for new SRV_Channels parameter conversion call 2020-01-14 14:23:11 +11:00
Henry Wurzburg 040a1b7fbe Plane:fix typo in ARSPD_FBW_MAX param description 2020-01-02 12:00:52 -07:00
Peter Hall 660c9a8a60 Plane: move from FLAP_IN_CHANNEL to RCx_Option 2020-01-01 08:11:01 +11:00
Andy Piper eca398e7a2 Plane: create generic vehicle management and move runcam to it 2019-12-30 13:02:04 +11:00
Peter Barker 33a0e55b32 Plane: correct duplicate button instance 2019-12-10 09:29:52 +09:00
Henry Wurzburg f2d8a42de8 Plane: correct crash_detect param description...no manual mode option bit exists 2019-11-23 17:39:06 -08:00
Andrew Tridgell 2b27cd2ce9 Plane: Add EFI Support 2019-11-17 20:10:54 +11:00
Peter Barker 2a22e7c8c5 Plane: adjust for renaming of RangeFinder files 2019-11-12 07:14:37 +08:00
Andrew Tridgell ff400243e0 Plane: added a new TAKEOFF flight mode 
takeoff then circle in direction of takeoff
 2019-10-17 12:19:43 +11:00
Henry Wurzburg 3e08e18202 Plane: add QACRO to flight mode list 2019-10-16 13:14:06 +11:00
Peter Barker 7e5a6f1895 Plane: avoid allocate a GCS_MAVLINK per mavlink channel 2019-08-14 18:25:43 +10:00
Michael du Breuil 2d81ad63f5 Plane: Convert ARMING_CHECK 2019-07-30 10:42:16 +10:00
Michael du Breuil c6f884221e Plane: Fix parameter description on values to not use the delimiter character 2019-07-23 09:29:48 +10:00
Michael du Breuil 183640789d Plane: Enable scripting parameters 2019-06-18 00:06:32 -07:00
Andrew Tridgell 08baabed4a Plane: modify FENCE_AUTOENABLE docs 2019-06-11 06:58:47 +10:00
Andrew Tridgell 5076058459 Plane: added FENCE_AUTOENABLE=3 option 
this enables the fence when arming. If the vehicle is outside the
fence or it can't be enabled then arming fails
 2019-06-11 06:58:47 +10:00
IamPete1 fb4b092917 plane: restore thr_min behaviour and update description 2019-04-23 09:39:45 +10:00
Tom Pittenger ade6281923 Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter 2019-04-03 17:46:50 -07:00
IamPete1 520f5f7894 Plane: add crow flap options paramiter 2019-04-04 09:18:11 +11:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Peter Barker 903be58436 Plane: add param conversion from MAG_ENABLE to COMPASS_ENABLED 2019-04-02 10:24:49 +11:00
Peter Barker 73707077b5 Plane: move enabled parameter into compass library 2019-04-02 10:24:49 +11:00
Tom Pittenger 7030dbc766 Plane: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Andrew Tridgell 3907466f9d Plane: added TKOFF_TIMEOUT parameter 
this allows for a timeout on auto-takeoff. This can be combined with
other takeoff parameters to allow the user to abort a hand-launch
after the motor has started without GCS interaction.

The 4m/s threshold is a bit arbitrary. We could make that a parameter
in the future if it is needed
 2019-03-18 14:48:08 +11:00
Andrew Tridgell cd1f21b806 Plane: removed some px4 specific code and docs 2019-02-27 20:32:37 +11:00
Tom Pittenger c422a21f55 Plane: ICE to use ahrs singleton 2019-02-05 15:34:08 +11:00
Nathan E 4d7fc66657 Update parameters.cpp per magicrub comments 2019-01-23 09:24:18 -07:00
Nathan E 448d19ddbb Update ArduPlane/Parameters.cpp 2019-01-23 09:24:18 -07:00
Peter Barker 40856fef56 Plane: remove vestiges of old PX4_MIXER code 2019-01-19 19:31:03 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Michael du Breuil ae6dc01cd5 Plane: Reset all storage when format version is incorrect 2019-01-08 10:35:37 +11:00
Michael du Breuil a78bce32c0 Plane: Allow users to force target airspeed in cruise or fbwb 2018-12-18 22:36:55 -08:00
Nikhil Upadhye d1e93bae83 Plane: adding new mode QAUTOTUNE 
copter like autotune support for quadplanes and tailsitter in VTOL mode.

cleanup
 2018-12-14 16:33:11 +11:00
Michael du Breuil f3a843ebf7 Plane: Fix a comma in bitmask that was breaking emitters 2018-12-11 10:24:40 +11:00
Andrew Tridgell 1d00d26b9e Plane: added parameters for crow flaps 
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
 2018-11-20 10:00:38 +11:00
Michael du Breuil 8ce0460daf Plane: Remove old parameter conversion 2018-11-10 18:58:54 +11:00
Eugene Shamaev 01178a75e9 Plane: added landing gear support 2018-11-09 14:35:14 +11:00
Andrew Tridgell d5c29fc57e Plane: use IOMCU mixing if available 2018-11-07 07:35:45 +11:00
Michael du Breuil 1c54fa0230 Plane: Remove old battery conversion that conflicts with new monitor 2018-11-06 10:18:39 +09:00
Michael du Breuil d9e02403e1 Plane: Fix battery failsafe parameter conversion 2018-11-06 10:18:39 +09:00
Andrew Tridgell 5ce418b4ea Plane: added FLIGHT_OPTIONS bit for disabling pitch up check in takeoff 
some takeoff procedures use high pitch angles
 2018-10-31 18:53:36 +11:00
Andrew Tridgell a00e06ea13 Plane: added TKOFF_ACCEL_CNT for multi-shake to start 
this allows you to setup shake to start with a lower accel threshold,
but with multiple fwd/back movements needed.

This implements https://github.com/ArduPilot/ardupilot/issues/2221
 2018-10-31 18:53:36 +11:00
Andrew Tridgell 009786a338 Plane: small update to failsafe documentation 2018-10-18 11:38:07 +11:00
Michael du Breuil 3aed07a83a Plane: Create a scripting object 2018-10-09 10:08:52 +11:00
Michael du Breuil b945970914 Plane: Fix FLIGHT_OPTIONS bitmask doc 2018-09-27 17:20:49 +01:00
Randy Mackay b61b25e5bf Plane: minor format fix to Parmeters.cpp 2018-09-11 19:34:39 +10:00
Randy Mackay 96d494c2e8 Plane: use parent AP_Arming rudder value 2018-09-11 19:34:39 +10:00
Michael du Breuil f150cae75a Plane: Allow center throttle to be trim airspeed in cruise 2018-09-11 09:07:00 +10:00
Peter Barker b574f4c1fc Plane: move support for inverted flight to rc-aux-switch 
Functional change here; if someone de-configures the rc aux switch in
flight they will remain inverted
 2018-09-07 09:07:40 +10:00
Michael du Breuil 8417bcc7d5 Plane: Add flight options bitmask 2018-08-28 09:40:53 +10:00
Andrew Tridgell c964a393c0 Plane: fixed RC_Channels parameter docs 2018-08-04 12:28:38 +10:00
Peter Barker 9ce02bc504 Plane: minimal support for inheritting from RC_Channel 2018-08-01 12:11:30 +09:00
Andrew Tridgell 1d675390ab Plane: make soaring an optional build feature 
this disables soaring on px4-v2, saving 5k of flash

This is needed to consider pr #9042, which takes a lot of flash space
 2018-07-30 13:09:15 +10:00
Lucas De Marchi 7f0d5ddf21 AP_Param: stop panic()'ing on unknown parameters 
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.

On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.

This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
 2018-06-28 10:18:19 -07:00
Andrew Tridgell bc503cc600 Plane: moved OSD to top level params 
this is to give lots of depth for OSD params (which will be very
complex)
 2018-06-27 14:55:00 +10:00
Alexander Malishev 75bf6984f5 Plane: added OSD support 2018-06-27 14:55:00 +10:00
Michael du Breuil 44f2a652f3 Plane: Remove software type param 2018-06-05 09:14:12 +10:00
Andrew Tridgell c20351202d Plane: document TKOFF_THR_SLEW = -1 for takeoff 2018-04-26 15:59:06 +10:00
Michael du Breuil 7405bb7b85 Plane: Support new battery failsafes 2018-03-27 22:12:21 +01:00
night-ghost 98b8a61ca8 Plane: allow AP_Stats to be optional 2018-03-02 07:23:35 +11:00
David Ingraham a6aeebad4b Plane: Add support for AP_Gripper 2018-03-01 14:14:43 +11:00
David Ingraham 9419cc3b32 Plane: Fix param docs for quadplane attitude control 
Docs aren't currently being generated for plane for AC_AttitudeControl.cpp. I believe this will fix that.
 2018-02-20 16:38:27 +11:00
Andrew Tridgell 31d7d9f909 Plane: change airspeed parameter prefix 
this makes for clearer parameter names with dual sensors
 2018-01-16 07:14:20 +11:00
Tom Pittenger 512b327cd4 Plane: failsafe events to use enums instead of magical numbers : Non-functional change 2017-12-07 00:19:32 -08:00
Michael du Breuil 1a3ca43e86 Plane: Don't check FS_SHORT_TIMEOUT if it's disabled 
Also renames the check_minimum_altitude() to reflect that it's only used
for FBWB.
 2017-11-24 09:58:01 -08:00
Andrew Tridgell 271373e1e8 Plane: added a not on min slew rate for throttle 2017-11-13 10:29:46 +11:00
Andrew Tridgell 126d5ce5d4 Plane: re-implement MIXING_OFFSET 
this was lost in the conversion of SRV_Channels
 2017-11-04 09:34:22 +11:00
Andrew Tridgell 6bfed07eae Plane: updated USE_REV_THRUST docs 2017-08-30 08:46:53 +10:00
Michael du Breuil 8630037fd7 Plane: Parameterize the home altitude reset conditions 2017-08-29 13:09:46 -07:00
Andrew Tridgell d541ac509f Plane: removed TRIM_RC_AT_START parameter 
this option caused a lot more problems than it solved, and is buggy
 2017-08-29 07:35:49 +10:00
Peter Barker 2861c1d06a Plane: add ArduSub to list of SYSID_SW_TYPE 2017-08-24 19:50:38 +09:00
Peter Barker 1a665280e9 Plane: remove CLI 2017-08-14 10:23:50 +09:00
Andrew Tridgell 99df31f6ec Plane: fixes from review 
thanks Francisco
 2017-08-01 08:25:32 +10:00
Andrew Tridgell cff692ca48 Plane: implement MANUAL_RCMASK 
this replaces the functionality of the old "with input"
aileron/elevator functions, but in a much more flexible way. It means
that people who want to fly in MANAUL mode will have the ability to
have full control of trims and mixing using transmitter mixers if they
need that functionality
 2017-08-01 08:25:32 +10:00
Andrew Tridgell 0266168e69 Plane: removed old elevon and vtail mixers 
now only use the function based mixing, and auto-convert on startup
 2017-08-01 08:25:32 +10:00
Eugene Shamaev b95ebadf8b ArduPlane: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Andrew Tridgell 51b39ea3a1 Plane: removed ancient "mix_mode" type elevon mixing 
this has been deprecated for a long time
 2017-07-03 11:17:42 +10:00
Andrew Tridgell 725244ff8a Plane: implement new TRIM_AUTO functionality 
this fixes TRIM_AUTO for new scaled output approach to servo functions
 2017-07-03 11:17:42 +10:00
Andrew Tridgell c9e4423997 Plane: re-implement flaperons 
implement as scaled output instead of PWM output

this will break some peoples setups, but gives much easier setup and
more consistent behaviour
 2017-07-03 11:17:42 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas ccee841578 Plane: NFC SYS_NUM_RESETS is a read-only variable 2017-06-07 19:53:03 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas 14b214eb9b Plane: remove FS parameters default values macros. 
They just add an un-necessary level of indirection in the code. The parameters are run-time configurable now.
 2017-06-07 17:46:39 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas 405e0bb9d9 Plane: Add missing @RebootRequired: True 2017-05-27 01:55:55 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas 2f5f8eb323 Plane: Use SI units conventions in parameter units 
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
 2017-05-17 18:07:25 +10:00
Mark Whitehorn 7679b758b0 Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter 
controls rudder to differential thrust mixing in FW mode
 2017-04-06 08:29:44 +10:00
Andrey Kolobov 35d406aeab Plane: added a soaring controller to Arduplane 2017-03-14 08:53:10 +11:00
Michael du Breuil cf10b7b841 Plane: Add support for landing PID's and servo control 2017-03-02 12:38:59 +11:00
Randy Mackay eb746eaeef Plane: fix SYSID_ENFORCE parameter description 2017-02-28 15:08:17 +09:00
Andrew Tridgell 0fc04b0158 Plane: setup plane frame type parameter flags 2017-02-14 19:50:01 +11:00
Peter Barker 1d7994e9ba Plane: create GCS_Plane subclass 2017-02-13 17:03:06 +11:00
Peter Barker d060670ba3 Plane: rename gcs[] to gcs_chan[] 
Wish to use gcs() to return the gcs singleton
 2017-02-13 09:32:01 +11:00
Michael du Breuil 7a1cbf76d3 Plane: Remove ALT_MIX 
Closes #4998, and fix a tab/spaces error on the previous parameter
 2017-02-13 09:18:52 +11:00
Andrew Tridgell 90d9e74054 Plane: fixed parameter path 2017-02-06 15:12:32 +11:00
Michael du Breuil 2326eee9a0 Plane: Move loiter_radius to vehicle 2017-01-30 10:43:54 -08:00
murata 2492b9db7e Plane: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Andrew Tridgell 3338b4295e Plane: use reload_defaults_file() 2017-01-12 17:39:37 +11:00
Andrew Tridgell 68504dbcbb Plane: auto-upgrade old parameters for SRV_Channel split 2017-01-12 17:39:37 +11:00
Andrew Tridgell b83f50be0f Plane: use new SRV_Channels API 2017-01-12 17:39:37 +11:00
priseborough 38a0e8a6ae ArduPlane: Add EKF3 and remove EKF1 2016-12-19 08:07:09 +11:00
Tom Pittenger 6544afbcba Plane: Migrate the rest of "LAND_" params from Plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger bfbfc3ea3d Plane: migrate aparm "LAND_" params from plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger fa991297db Plane: create new "LAND_" param block for AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger f556f705e6 Plane: move various g params to aparms 2016-11-25 19:07:30 -08:00
Tom Pittenger 0ffeed644c Plane: remove define RANGEFINDER_ENABLED - always enabled 2016-11-25 19:07:30 -08:00
murata 0ee8edc29d Plane: Change from printf statement to print, println statement. 2016-11-25 15:57:15 -08:00
Michael du Breuil 4dae7a6f3d Plane: Simplify parameters 
Remove a lot of cases where @Values and @Bitmask were encoding the same
information. @Value should only be used with @Bitmask when it is being
used to present a series of reasonable defaults that is some hybrid of
the @Bitmask fields. Enumerating each bit as 1, 2, 4, 8 is of no value.
 2016-11-13 11:53:19 -08:00
Peter Barker 98ae6c776a Plane: support for AP_Stats (flight time, bootcount, runtime) 2016-10-29 14:53:25 +09:00
Peter Barker 33b7750c7d Plane: remove duplicate parameter metadata 2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 3a8e38ee12 Plane: added SYSID_ENFORCE parameter 
this allows safer sharing of telemetry links between aircraft
 2016-10-15 17:12:13 +11:00
Andrew Tridgell 8170df7ba8 Plane: added servo remapping object 2016-10-15 16:59:35 +11:00
Andrew Tridgell d6890495aa Plane: added swapped channel version of elevon/vtail/flaperon output 
this makes it possible to setup an elevon plane without changing the
transmitter reversals
 2016-09-14 11:48:05 +10:00
Andrew Tridgell 9b83781b4f Plane: fixed mixer arming error with FMUv4 
thanks to Tim Gold for reporting this
 2016-09-11 08:25:40 +10:00
Randy Mackay d3f8b1b846 Plane: TELEM_DELAY parameter range to 30sec 
No functional change
 2016-08-29 15:29:18 +09:00
Tom Pittenger 285e41bac6 Plane: add avoidance_adsb framework for object avoidance 2016-08-17 22:38:54 -07:00
Tom Pittenger 399fa195bb Plane: add comment to FLTMODE param to include AVOID_ADSB 2016-08-17 22:38:54 -07:00
Andrew Tridgell 7ce7eb5a60 Plane: added Q modes to parameter docs 2016-08-16 13:15:41 +10:00
Andrew Tridgell 5d6dfd927b Plane: changes for AP_AdvancedFailsafe naming 2016-08-16 12:55:50 +10:00
Tom Pittenger fc50f145ce Revert "ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter)." 
This reverts commit da1b18d918.
 2016-08-07 17:54:24 -07:00
Ricardo de Almeida Gonzaga 7a9fe95ccb ArduPlane: Fix typos 2016-08-04 11:41:18 -07:00
AndersonRayner da1b18d918 ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter). 2016-08-04 10:09:04 -07:00
Andrew Tridgell 327a057ee0 Plane: added internal combustion engine support 
this allows for automatic engine start and restart
 2016-07-25 10:06:03 +10:00
Andrew Tridgell 3f0a8d1761 Plane: added AP_Button support for plane 
this also adds the g2 parameter table
 2016-07-22 15:01:20 +10:00
Andrew Tridgell 1256c2f351 Plane: changed for AP_Vehicle API change 2016-06-24 11:39:23 +10:00
Michael Day cdeef9d692 Plane: Fence breaches can go to RTL mode with new FENCE_ACTION setting. 2016-06-07 15:46:52 +10:00
E Thomas 7d824247af Differential spoilers support, elevon offset 
Fixed differential spoilers support, added elevon offset
See PR #2935
 2016-06-06 21:55:50 -07:00
Andrew Tridgell b7fe96188d Plane: raise range of THR_FS_VALUE 
need to cope with reversed throttle
 2016-05-21 07:39:02 +10:00
Tom Pittenger 6746b4227a Plane: handle large negative baro offsets (corner case) to self-trigger a land-abort go-around 
new param: LAND_ABORT_DEG
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is higher than the intended slope path. Steeper slopes can result in crashes so this allows the option to remember the baro offset and self-abort the landing and come around for a another landing with the correct baro offset applied for a perfect slope. An auto-abort go-around will only happen once, next attempt will not auto-abort again. This operation happens entirely automatically in AUTO mode. This value is the delta degrees threshold to trigger the go-around. Example: if set to 5 deg and the mission planned slope is 15 deg then if the new slope is 21 then it will go-around. Set to 0 to disable. Requires LAND_SLOPE_RCALC > 0.
 2016-05-17 15:41:09 -07:00
Tom Pittenger 034cd2413e Plane: re-calc landing glide slope to gracefully handle baro offset during long flights 
New param: LAND_SLOPE_RCALC
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is lower than the intended slope path. This value is the threshold of the correction to re-calculate the landing approach slope. Set to zero to keep the original slope all the way down and any detected baro drift will be corrected by pitching/throttling up to snap back to resume the original slope path. Otherwise, when a rangefinder altitude correction exceeds this threshold it will trigger a slope re-calculate to give a shallower slope. This also smoothes out the approach when flying over objects such as trees. Recommend a value of 2m.

default value is 2 (so, enabled by default)
 2016-05-17 15:39:04 -07:00