Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
13,744 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

3464 Commits

Author SHA1 Message Date
Randy Mackay 5f55944e43 Copter: AC3.2-rc12 release notes 2014-10-10 14:53:25 +09:00
Randy Mackay d7cd745cf4 Copter: auto-trim start delays auto-disarm by 15sec 
Fixes issue in which user only had 5 seconds after starting auto-trim to
raise the throttle before the auto-disarm would kick-in.
 2014-10-09 22:43:44 +09:00
Randy Mackay a8733ae8a8 Copter: support pre-flight calibration of gyro 2014-10-09 10:00:15 +09:00
Randy Mackay 9a0a83f404 Copter: report gyro unhealthy if failed calibration 2014-10-09 10:00:12 +09:00
Randy Mackay 128058362b Copter: pre-arm check that gyro cal succeeded 2014-10-09 10:00:09 +09:00
Randy Mackay 8eba55ed67 Copter: throttle zero debounce to separate function 
Also initialise throttle_zero  to true on startup
Treat throttle less than zero as zero
 2014-10-08 21:52:16 +09:00
Jonathan Challinger 8e3d163c3d Copter: Change all zero throttle checks that should be conservative to use ap.throttle_zero 2014-10-08 20:54:24 +09:00
Jonathan Challinger 96f50b7cd7 Copter: add throttle_zero state 2014-10-08 20:54:19 +09:00
Jonathan Challinger fa9d10e59b Copter: log CURR message at 10hz 2014-10-08 20:49:36 +09:00
Randy Mackay 2f3f1a1d5e Copter: Rate Pitch IMAX default to 1000 
Spotted by Jonathan Challinger, thanks!
 2014-10-07 21:06:43 +09:00
Randy Mackay 4e27dbdc42 Copter: ReleaseNotes for AC3.2-rc11 2014-10-06 11:55:46 +09:00
Randy Mackay 68a9286086 Copter: use define for pre-arm compass offset check 2014-10-03 13:59:31 +09:00
Randy Mackay 7ced9b1bd3 TradHeli: remove overall throttle level from landing check 2014-10-02 16:10:44 +09:00
Randy Mackay f059af2386 Copter: only report ahrs unhealthy after initialisation 2014-10-02 14:41:26 +09:00
Andrew Tridgell f2e6fa3fb0 Copter: use handle_set_mode() 2014-10-01 14:19:31 +10:00
Randy Mackay 77e89214eb Copter: shift pos targets to current location before takeoff 2014-09-29 15:26:54 +09:00
Jonathan Challinger 73e1719ee1 Copter: print frame type in log headers 2014-09-27 16:11:21 +09:00
Randy Mackay 8aa5c10d53 Copter: remove unused AIRFRAME definition 2014-09-27 15:15:13 +09:00
Randy Mackay 1a249a8129 Copter: check target of set-mode request from GCS 
Issue discovered and fix contributed by Deadolous
 2014-09-27 12:22:12 +09:00
Randy Mackay ef0e37b478 Copter: bugfix to condition-yaw for relative angles 
Thanks to roque-canales for raising the issue and paradisephil for finding
the specific piece of code that went wrong and suggesting the fix.
 2014-09-26 12:22:58 +09:00
Randy Mackay 45bc9fd10c Copter: add AC3.2 default to LOG_BITMASK value 2014-09-25 15:32:21 +09:00
Randy Mackay 0d88b602ec Copter: fix RSSI_RANGE param values 
The extra .0 after the 5 was causing the mission planner to not display
5V in the dropdown even though the value was 5.
 2014-09-25 15:32:20 +09:00
Randy Mackay ed566fa56c Copter: update AC3.2-rc10 release notes 2014-09-24 14:30:10 +09:00
Randy Mackay 41c576044f Copter: allow passthru for ch 9 ~ 14 
Based on work by Emile Castelnuovo
 2014-09-23 22:55:19 +09:00
Randy Mackay d4cfb432ca Copter: use disparity threshold define for pre-arm checks 
There are two duplicate checks, one in the pre-arm checks (i.e. checks
run every 15 seconds or so before the vehicle is armed) and one in the
arming checks (run immediately before arming).  The definition in the
pre-arm checks was still using the old hardcoded value.
 2014-09-23 19:33:04 +09:00
lthall 2b4f5fa79d Copter: increase autotune limits 
Rate D max to 0.020 (was 0.015)
Rate P max to 0.35 (was 0.25)
Stab P max to 20 (was 15)
 2014-09-22 21:33:35 +09:00
Randy Mackay e7753223ba Copter: low battery msg to severity high 2014-09-21 17:33:19 +09:00
Randy Mackay 193bc5331a Copter: cleanup enabling of cli and frsky telem for APM 2014-09-20 14:41:26 +09:00
Randy Mackay d8d1b38a52 Copter: increase Alt Disparity check to 2m 2014-09-20 12:24:36 +09:00
Randy Mackay 9bbf40109e Copter: add LOG_FROM_STARTUP definition 
Uncommenting this line in APM_Config.h will start logging as soon as the
board starts up instead of waiting for the vehicle to be armed
 2014-09-20 12:23:47 +09:00
Jason Short b2238b7c8a Copter: auto esc calibration 
Throttle is raised to maximum and then lowered without any input from
pilot
 2014-09-19 22:21:49 +09:00
Randy Mackay 58602bd1ae Copter: move esc calibration to separate file 
Restructured into case statement
Replaced use of g.throttle_max with definition
Added more comments
Send message to ground station instead of printing on console (although
probably both are unlikely to be read)
 2014-09-19 22:21:47 +09:00
Jason Short b57539a9ad AP_Motors: throttle_pass_through accepts pwm 2014-09-19 22:21:45 +09:00
Randy Mackay 1c11a91ec2 Copter: rename land_maybe_complete function 2014-09-19 16:43:17 +09:00
Randy Mackay b9977a1115 Copter: add land_complete_maybe flag 2014-09-19 16:43:15 +09:00
Randy Mackay 6951a20fb0 Copter: soften loiter target when maybe landed 
Applies to auto's land, land, loiter, pos hold and rtl flight modes
 2014-09-19 16:43:12 +09:00
Randy Mackay b552479e31 Copter: typo fix for baro vs inav alt disparity definition 2014-09-18 17:32:03 +09:00
Randy Mackay 18e3db0011 Copter: define limit for baro vs inav alt disparity 2014-09-18 17:24:40 +09:00
Andre Kjellstrup b4c6d6395e Copter: reset battery_fs after dis/rearming 2014-09-18 11:17:03 +09:00
Randy Mackay 2efeb768e0 Copter: allow GCS to turn safety switch on/off 2014-09-17 21:51:25 +09:00
Randy Mackay 9bcf9a31ed Copter: set sys_status motor outputs bit from safety switch 2014-09-17 21:51:23 +09:00
Randy Mackay 9f3803052f Copter: add support for DO_PARACHUTE from GCS 
Mission command support was already included but this adds support for
DO_PARACHUTE received as a COMMAND_LONG message which are sent from the
GCS when the command should be executed immediately
 2014-09-17 21:14:26 +09:00
Randy Mackay adf00a207b Copter: enable EPM by default on Pixhawk 2014-09-17 21:14:22 +09:00
Randy Mackay bbe4438a6b Copter: add support for DO_GRIPPER command 2014-09-17 21:14:19 +09:00
Randy Mackay 3fa3cb6d65 Copter: remove EPM neutral from ch7/ch8 switch 
The EPM library returns the pwm output sent to the EPM to the neutral
position automatically meaning an explicit ch7/ch8 setting is not
required
 2014-09-17 21:13:45 +09:00
Randy Mackay 14d80910ec Copter: integrate EPM ver2 2014-09-17 21:13:35 +09:00
Jonathan Challinger 8ca4795ffb Copter: Log NTUN while in LAND mode with GPS 2014-09-16 10:19:33 +09:00
Randy Mackay 345d4353e5 Copter: adjust EKF_CHECK parameter description 
Default has been changed to 0.8 for -rc9 so we need to update the
description values so they match
 2014-09-12 21:28:41 +09:00
Randy Mackay d15a5f9dcb Copter: THR_ACCEL_IMAX default to 800 2014-09-12 15:11:48 +09:00
Randy Mackay 224122958c Copter: reduce throttle to min once landed in RTL 
This catches the case where the vehicle lands but the user doesn't
immediately put the throttle to zero.  Before this check it would
continue to attempt to hold it's
 2014-09-12 14:16:05 +09:00
Randy Mackay eac26cdd0f Copter: THR_ACCEL_IMAX param range increased 2014-09-12 14:16:04 +09:00
Randy Mackay a12d9109e0 Copter: remove thr check during init_arm_motors 
This check is redundant now that we have a check within the arm_check()
function.
Removing this check does raise a slight danger that someone could raise
the throttle after arming but before the gyro and baro calibration has
completed but the delay has been greatly shortened from what it once was
so there is much less danger that someone could approach the vehicle
during the short arming delay.
 2014-09-11 21:13:35 +09:00
Randy Mackay 5720bff29f Copter: AC3.2-rc9 release notes 2014-09-11 20:38:56 +09:00
Randy Mackay 906b3dfbec Copter: AC3.2-rc8 release notes 2014-09-11 16:54:04 +09:00
Randy Mackay 4c6b0bb1cb Copter: format change to flight mode default defined 
This also kicks off the build for AC3.2-rc8
 2014-09-11 16:52:36 +09:00
Randy Mackay 48bc1456d0 Copter: increase Rate PID param ranges 
RATE_RLL_P to 0.25 (was 0.20)
RATE_PIT_P to 0.25 (was 0.20)
RATE_YAW_P to 0.50 (was 0.25)
RATE_YAW_I to 0.05 (was 0.02)
 2014-09-10 16:40:36 +09:00
Craig Elder ea82caf7a4 Copter: Parameters.pde 
Corrected typo in parameter description
 2014-09-09 12:34:59 -07:00
Randy Mackay 0d7a999fc1 Copter: arming check that throttle is low 2014-09-09 23:02:18 +09:00
Randy Mackay 294f836c8c Copter: never send unhealthy terrain status 
Copter does not yet rely on the terrain data (it's for informational
purposes only) so we will temporarily disable the failure flags to the
GCS to avoid support calls
 2014-09-09 22:19:20 +09:00
Randy Mackay bf18fb896a Copter: send extended status to GCS only after initialisation 2014-09-09 22:17:46 +09:00
Randy Mackay 21d56735ca Copter: increase EKF_CHECK_THRESH default to 0.8 
Also remove unused #define related to inertial nav check (now removed)
 2014-09-09 14:59:27 +09:00
Randy Mackay 9c613cd1ec Copter: reduce alt hold defaults 
Throttle Rate P to 5.0 (was 6.0)
Throttle Accel P to 0.5 (was 0.75)
Throttle Accel I to 1.0 (was 1.5)
 2014-09-07 22:14:40 +09:00
Randy Mackay db12df2237 Copter: minor ReleaseNotes format change 
This also helps to kick off the build of AC3.2-rc7
 2014-09-04 16:19:02 +09:00
Randy Mackay 05233fbf02 Cotper: AC3.2-rc7 release notes 2014-09-04 15:41:10 +09:00
Randy Mackay 641c8317a5 Copter: pre-arm consistency check of gyros 2014-09-04 15:21:58 +09:00
Randy Mackay 28f31166b9 Copter: land check gets overall throttle and rotation rate check 
add check that overall throttle level is below the non-takeoff throttle
instead of just checking that it's motors have hit their lower limits
because low limits can also be caused by high yaw rotation requests.
Absolute climb rate requirement reduced to 30cm/s
 2014-09-04 15:21:51 +09:00
Randy Mackay 05a37dd54d Copter: add short delay to arming to allow RC input 
The short delay gives time for the RC inputs to be processed which
removes the chance of a false-positive on the "late frame" radio check.
A false positive could lead to an immediate disarm right after arming.
 2014-09-04 15:11:57 +09:00
Randy Mackay 59404c25e3 Copter: pre-arm consistency check of accels 2014-09-03 13:51:44 +09:00
Randy Mackay 4a06941a39 Copter: individual accel and gyro status to GCS 2014-09-03 11:22:51 +09:00
Randy Mackay d7343d5dc7 Copter: check all gyros and accels in pre-arm check 2014-09-03 11:22:49 +09:00
Randy Mackay 818b3b74f6 Copter: sanity check throttle deadzone 2014-09-02 12:40:15 +09:00
Jason Short 82481f30a3 Copter: move drift thr assist to separate function 
no changes in functionality.
 2014-08-31 14:22:56 +09:00
Randy Mackay 48d143d4ef Copter: minor format change to release notes 
This also helps kick off the rebuild so AC3.2-rc6 appears in the mission
planner
 2014-08-31 12:29:37 +09:00
Randy Mackay ebfd828087 Copter: update AC3.2-rc6 release notes 
forgot compass-not-calibrated bug fix
 2014-08-31 12:06:03 +09:00
Randy Mackay d04a4834fa Copter: update AC3.2-rc6 release notes 
Forgot to add GPS driver buffer overflow item
 2014-08-31 12:02:00 +09:00
Randy Mackay 13f994d3ad Copter: AC3.2-rc6 release notes 2014-08-31 11:55:06 +09:00
Randy Mackay 07420521ab Copter: default LAND_REPOSITION to 1 2014-08-31 10:44:09 +09:00
Jason Short 0dd9797fe6 Copter: restore CLI set parameter feature 
Added back the ability to set params from CLI
 2014-08-31 10:36:42 +09:00
Randy Mackay cf98cc29b5 Copter: throttle deadzone parameter 
Allows increasing or decreasing the deadband size in AltHold, Loiter,
PosHold flight modes
 2014-08-29 15:54:34 +09:00
Randy Mackay eb51a8e5da Copter: pre-arm check of internal vs ext compass 2014-08-26 22:34:06 +09:00
Randy Mackay 2b0a7c59bc Copter: remote arming check reference to compass learning 2014-08-26 22:34:04 +09:00
Randy Mackay 63d0cddfa4 Copter: make landing detector more strict 
Made more strict by requiring 50 consecutive iterations where the climb
rate is below +- 40cm/s.  Previously it was 50 cumulative.

Removed check of failsafe.radio when clearing the land flag because it
could result in the vehicle taking off if the user picked it up.
 2014-08-25 21:12:05 +09:00
Randy Mackay 65ed77e803 Copter: ensure motors don't stop during flip 2014-08-23 23:40:13 +09:00
Randy Mackay e1e010c504 Copter: remove unused flip_stop 2014-08-23 23:40:11 +09:00
Randy Mackay 4184c1d6e5 Copter: flip minor comments and formatting 2014-08-23 23:40:09 +09:00
Jason Short 882edaf787 Copter: add pitch axis flipping 
Added Pitch axis flipping. You must be pushing forward or back 3° to make it flip in Pitch axis or it will flip in the default roll axis.
Added some extra throttle control to maintain altitude
removed the CH7 ability to exit Flip mode. It will exit only if completing flip or user aborts with control sticks.
 2014-08-23 23:40:07 +09:00
Randy Mackay a83a47682d Copter: remove get_angle_targets_for_reporting fn 
this saves a tiny amount of time by removing the memory copy of a
Vector3f
 2014-08-22 22:56:21 +09:00
Andrew Tridgell 7618ffde63 Copter: show firmware version on param fetch 
fixes pull #1320

thanks Arthur!
 2014-08-22 21:13:11 +10:00
Randy Mackay 7d350735df TradHeli: update AttControlHeli constructor 
reference to rc_1, rc2 are replaced with constant updates during
acro_run
 2014-08-22 16:29:02 +09:00
Randy Mackay 2cd6d986d5 TradHeli: call passthrough_bf_roll_pitch_rate_yaw 2014-08-22 16:29:00 +09:00
Robert Lefebvre 968f1d64ae Logging: Fix comment error. 2014-08-22 16:28:54 +09:00
Robert Lefebvre a4f710a363 TradHeli: Add yaw-only rate request function for flybar acro mode. 2014-08-22 16:28:52 +09:00
Robert Lefebvre 3316fe8f63 TradHeli: Reset flybar passthrough to false when exiting Acro mode. 2014-08-22 16:28:50 +09:00
Robert Lefebvre f5ddaab35b TradHeli: Set Flybar passthrough mode in Acro Initialization function. 2014-08-22 16:28:47 +09:00
Robert Lefebvre 82061bc65d TradHeli: Add pointer for pilot roll/pitch inputs to attitude_control constructor. To be used for flybar passthrough. 2014-08-22 16:28:40 +09:00
Randy Mackay c87283af98 Copter: remove inav check 
the EKF check works reliably but attempts to check the inertial nav for
errors has not been successful.  I could not find a way to reliably
catch flyaways without also introducing false positives (and thus
unwanted LANDings)
 2014-08-20 14:39:56 +09:00
Andrew Tridgell a627cd2af2 Copter: run Linux boards at 100Hz for now 
we should be able to do 400Hz in future
 2014-08-19 20:03:33 +10:00
Randy Mackay a693907429 Copter: add ACRO_EXPO param values 2014-08-19 12:51:27 +09:00
Andrew Tridgell 90f306cd3c Copter: set GPS non-blocking 
the new GPS driver only ever needs a non-blocking port
 2014-08-19 10:08:17 +10:00
NullVoxPopuli e578fb1615 Copter: add A-Tail to FRAME parameter description 2014-08-18 14:31:03 +09:00