d3c399c5d9
MAVLink: removed obsolete files
2012-08-09 15:25:49 +10:00
52b6e4ab2e
MAVLink: added generator.sh script
...
this is used to re-generate our MAVLink C code
2012-08-09 15:25:06 +10:00
a7399c405d
MAVLink: removed the need for Mavlink_compat.h
...
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
16d63978f1
MAVLink: moved mavlink variables back to library
...
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
1683f18bff
Allow fully independent operation of two AP_Mount instances
2012-08-08 23:11:23 +02:00
45b10a51ff
AP_Mount: Enable Joystick speed code, now that the framework supports more than 16 parameters per group.
...
Save some bytes by skiping the redundant *_rc_in initialization in the AP_Mount() constructor
2012-08-08 22:45:36 +02:00
eeaa855b03
SITL: fixed deletion of eeprom.bin
...
with the new AP_Param constructor order, we need to erase rather than
unlink the eeprom
2012-08-08 18:01:06 +10:00
5e19c0cf04
AP_Airspeed: removed values passed to constructor
2012-08-08 16:38:39 +10:00
fc26d49260
AP_Param: avoid saving values within 0.01% of the default value
...
this saves some more space due to rounding errors
2012-08-08 13:13:30 +10:00
3159c9ed99
AP_Mount: fixed defaults for angles
...
this saves some eeprom space by not saving the 4500 values
2012-08-08 13:04:49 +10:00
891ed81f74
AP_Math: rename get_bearing() to get_bearing_cd() to make units obvious
2012-08-08 12:12:30 +10:00
6245592447
SITL: added pgm_read_dword() and pgm_read_float()
2012-08-08 12:11:57 +10:00
e9d0ae3e7f
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
7be604cffd
AP_Param: update AHRS for new constructor syntax
2012-08-08 12:11:57 +10:00
3dfe55e72c
AP_Param: update PID libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
45c7c9b8d1
AP_Param: major update to use default values in var_info table
...
this stores the default value for all scalar variables in the var_info
table, which makes it possible to avoid storing default values in
eeprom. That allows us to oversubscribe the eeprom space with a much
lower risk of overrun.
2012-08-08 12:11:57 +10:00
b0e403e6fb
AP_Baro: the DerivativeFilter now handles duplicate data
...
this saves a few bytes of memory
2012-08-08 12:07:36 +10:00
fb90d16092
Filter: make the DerivativeFilter test GNUPlot friendly
...
makes testing easier
2012-08-08 12:07:36 +10:00
2de06df08d
Filter: automatically cope with duplicate timestamps
...
this makes it easier for callers to avoid excessive slope calculations
Thanks to Jon Challinger for the idea
2012-08-08 12:07:35 +10:00
c9a56e2223
Filter: fixed a off-by-one DerivativeFilter bug
...
many thanks to Jon Challinger for noticing this!
2012-08-08 12:07:35 +10:00
fbc25e4baa
AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo
2012-08-06 01:27:29 +02:00
36bcd827b4
AP_Mount: Allow using any RC channel to control any of the mount axes.
...
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
2012-08-05 23:48:57 +02:00
fe4713b46e
RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls.
2012-08-05 23:08:31 +02:00
f3f89004e9
More work on ch9, 10 and 11
2012-08-04 19:44:41 +02:00
431ed1c9b9
More flexible RC support
2012-08-04 18:39:20 +02:00
1ea2cb7b75
AP_Limits: experimental "bounce" mode.
2012-07-31 18:39:58 -07:00
54b320a9a0
Fixing Trad Heli Ext ESC Controller
...
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
2012-07-31 17:47:25 -04:00
23a1e33e20
AP_InertialSensor_MPU6000: another attempt at fixing the SITL build
2012-07-28 17:19:19 +09:00
06a4aaa763
AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully)
...
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
2012-07-28 16:33:04 +09:00
9a558be53e
AP_AHRS_MPU6000: cleaning up compiler warning due to unused yaw_deltat variable
2012-07-28 16:23:25 +09:00
ea4e56309d
AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning
2012-07-28 15:22:37 +09:00
a49454e905
AP_AHRS: updated test sketch to allow use of MPU6000's DMP
2012-07-28 14:27:26 +09:00
0820ebddb9
AP_AHRS_MPU6000: first draft implementation of class that uses MPU6000's DMP to calculate attitude
2012-07-28 14:17:38 +09:00
5a9211c278
AP_AHRS: removed var_info from AP_AHRS class (moved to AP_AHRS_DCM)
2012-07-28 14:16:56 +09:00
c2b47d2bf9
AP_AHRS_DCM: moved var_info to belong to AP_AHRS_DCM instead of AP_AHRS
2012-07-28 14:16:15 +09:00
ae119b08b3
AP_IMU_INS: added gx(), gy() and gz() methods to return gyro offsets
2012-07-28 14:15:23 +09:00
dfea845c37
AP_InertialSensor: methods added to access DMP functionality
2012-07-28 14:14:43 +09:00
e0b6ed12be
MAVLink: rename the message_definitions directory
2012-07-26 10:03:36 +10:00
b4fc025151
MAVLink: removed MAVLink 0.9 message definitions
...
we are now 1.0 only
2012-07-26 10:03:36 +10:00
960c2f08af
AP_Mount: addition of Amilcar's mount_type
...
set_roi_cmd modified to take a Location. I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
2012-07-25 11:00:38 +09:00
21f0ed00b3
AHRS: normalise GA_b before computing error vector only if too large
...
When GA_b is small the direction of the vector is unreliable, so
normalising can exacerbate the error in the direction
2012-07-23 17:16:50 +10:00
99410cbbfe
AP_AnalogSource: fixed reporting of VCC
...
the VCC pin number should not be converted
2012-07-21 19:49:24 +10:00
5f5c884a6d
AHRS: if we don't have gps correction enabled, zero the yaw correction
2012-07-20 17:21:04 +10:00
4f41b876b1
AHRS: allow the gps/accelerometers to control yaw when rolled
...
this solves a problem with yaw estimation when at high roll angles,
when the compass code becomes ineffective
2012-07-20 11:50:04 +10:00
404803a734
MAVLink: imported updated generated mavlink C code
...
no functionality changes
2012-07-20 11:50:03 +10:00
25c3ed6c4b
Oilpan ADC parameters added
...
including a function that configures each Accel Axis
Defaults matching old behavior
Added param group
2012-07-18 22:57:11 -07:00
8a4a9a929e
Lead Filter: simplified calculation
2012-07-18 22:57:10 -07:00
f704408094
GPS-UBlox: removed duplicate config messages
...
these were left over from debugging
2012-07-19 15:23:15 +10:00
13fb2e6dc9
RC_Channel parameters: Fix a typo
2012-07-18 22:39:49 +02:00
dea5b88379
Support up to 7 aux servo outputs
2012-07-18 21:58:22 +02:00
a2e6af1f9c
AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux)
...
For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.
2012-07-18 23:20:05 +09:00
8acc432084
Replace long with int32_t
2012-07-18 02:12:31 +02:00
f5c2ffca34
Use ascending order in the values
2012-07-18 02:11:49 +02:00
23f009f665
Improve parameter documentation, it still does not work, but is an improvement.
...
I just do not understand why these parameters do not appear in Mission planner :(
2012-07-17 23:32:30 +02:00
b97f9bb803
Airspeed Library - fix param names.
...
The Group definition give the start of the param name.
This way we can maintain multiple instances if required of the same library as options.
2012-07-16 21:48:47 +08:00
dfb22554aa
Airspeed: Added AP_Airspeed sensor library
...
this will allow an airspeed sensor object to be passed to AHRS for
dead reckoning
2012-07-16 11:21:20 +10:00
bec5321b8b
AP_MotorsMatrix: small bug fix to limit checking on remove_motor call. Fix thanks to Michael Peschel!
2012-07-16 00:38:58 +09:00
3b9a1d4305
RC_Channel_aux: added enable_out method to help stop servos from moving before the mount has initialised.
...
changed parameter names of "update_aux_servo_function" to make it more clear that any 4 servos can be passed in (not just servos 5~8).
Also allowed NULL servos to be passed in as parameters because we only need 3 in ArduCopter.
2012-07-15 16:28:53 +09:00
e83275d8ae
AP_Camera: changed "int" to "int16_t" and "long" to "int32_t" here and there.
2012-07-15 16:26:12 +09:00
31fd74d94c
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
804898c2a5
fix param config names
2012-07-14 15:34:15 +08:00
716ce6a5a7
Change to prevent Tricopter servos from going hard-over during Disarmed state.
...
Believe this was an oversight when the change to AP_Motors went in.
2012-07-13 23:12:26 -04:00
ab1212d8d2
Instituting Yaw Differential on Multirotors. Intent is to stop "rise on yaw input".
...
Since motors with increasing speed due to yaw input seem to generate more thrust that motors that slow lose thrust, thus net thrust goes up, causing copter to climb.
Values are a guesstimate, proven out by test flying. This could probably become a parameter.
2012-07-13 22:59:28 -04:00
9dfb3c4db9
Added Michael Pursifull's Maxsonar HRLV model support
2012-07-11 18:46:47 -07:00
d3426420ad
AP_Camera: moved seme constructor initialisers around to remove compile warnings
2012-07-12 09:33:22 +09:00
1105a35c77
AP_AnalogSource_Arduino: fix to allow analog port to be read to be specified as a "channel" (i.e. A0)
...
Also fixed example range finder sketch to work with interrupt enabled AP_AnalogSource_Arduino class
2012-07-11 21:19:17 +09:00
eb647b5320
AP_Mount: add support for non-spring-loaded joysticks
2012-07-11 00:07:33 +02:00
ad60fac863
RC_Channel: improve parameter documentation
2012-07-11 00:07:10 +02:00
42301af148
Remove unused function, remove unnecessary angle wrapping.
2012-07-11 00:06:45 +02:00
74ef712cd1
Allow mount control when no AHRS exists
...
Allow mount control on non stabilized axes
2012-07-11 00:06:26 +02:00
63a83b95b4
AP_Math: added get_distance_cm() to return in centimeters
2012-07-11 07:49:05 +10:00
15133b1105
AHRS: fixed HIL build
2012-07-10 18:02:05 +10:00
9b6acf168e
AHRS: added AHRS_GPS_GAIN parameter
...
this allows control of how much GPS velocity information is used in
doing centripetal correction in DCM
2012-07-10 16:22:48 +10:00
2bc530d04f
AP_Param: added some docs on the eeprom header format
2012-07-10 14:03:49 +10:00
0534ac12b1
DataFlash: The current method for checking if chip erase worked is producing false positives. We are forcing the block erase until we have a deterministic test method.
2012-07-09 15:23:35 -07:00
a79f55656a
RC_Channel: Improve documentation
2012-07-07 21:57:30 +02:00
8bd7ef9b9a
AP_Mount: Fix radians/degrees scaling regressions
...
Rename calculate() into stabilize()
Implement MAV_MOUNT_MODE_RC_TARGETING initialization
Document to make sure this radians/degrees mess up does not happen again
2012-07-07 21:56:56 +02:00
ec70e87495
AnalogSource: prevent a division by zero on zero ADC data
2012-07-06 19:59:18 +10:00
7bc724d118
APM: changed PID library to do automatic deltat calculation
...
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
2012-07-06 19:59:18 +10:00
44755bf3ce
AP_Baro: improved barometer averaging
...
this changes the barometer calculations to floating point. On a MS5611
this is actually about twice as fast as the previous 64 bit
calculations, but gains us more accuracy as we are able to take
advantage of sub-bit precision when we average over 8 samples.
2012-07-06 15:11:30 +10:00
43d6015811
Filter: split the DerivativeFilter steps into update() and slope()
...
this allows us to apply new data at a different rate than we calculate
the slope.
2012-07-06 15:11:30 +10:00
4723698489
AP_Baro: update MS5611 test to use baro library altitude
2012-07-06 15:11:30 +10:00
9845a55cb1
AHRS: make the yaw independent drift correction optional and disable
...
the new correction algorithm copes poorly with gyro drift, leading to
signification attitude errors in the face of drift
2012-07-06 15:11:30 +10:00
e33554a1f9
AHRS: only enable barometer for AHRS if it is smooth enough
...
if we used less than 5 samples to compute the pressure then don't use
it for climb rate
2012-07-05 16:29:21 +10:00
1ce4a03147
SITL: lower baro noise a bit
2012-07-05 16:29:21 +10:00
9f3da1bf7f
Filter: fixed DerivativeFilter example build
2012-07-05 16:29:21 +10:00
5f38669666
SITL: run the HIL barometer at 80Hz to match APM2
2012-07-05 16:29:21 +10:00
735c88e9b3
AP_Baro: added get_pressure_samples() interface
...
this returns how many samples were used to calculate the last pressure
2012-07-05 16:29:21 +10:00
92001e3e7d
Filter: fixed typo in 9 point DerivativeFilter
2012-07-05 16:29:20 +10:00
999a1d1d55
AP_Baro: change to a 7 point DerivativeFilter for climb rate
2012-07-05 13:00:47 +10:00
a07e280eda
Filter: cope with non-uniform time steps in the DerivativeFilter
...
this helps with the barometer a lot, as the timing is quite variable
2012-07-05 13:00:47 +10:00
ce3f8be6c7
SITL: add some minimal noise when motors are off
...
this actually improves the gyro calibration
2012-07-05 13:00:46 +10:00
fe54329de2
MAVLink: remove MAVLink 0.9 protocol support
...
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
9d7ed30023
AHRS: only use GPS for yaw when compass is not being used
...
this avoids having two competing controllers
2012-07-05 13:00:46 +10:00
6653c0b874
AHRS: enable barometer for vertical velocity
...
this re-enables the barometer for vertical velocity information
for drift correction, now that we have a better filter
on the climb rate
2012-07-05 13:00:46 +10:00
a5d607d25a
AP_Baro: use DerivativeFilter in barometer climb rate
2012-07-05 13:00:46 +10:00
f97289792b
Filter: added DerivativeFilter implementation
...
this adds a DerivativeFilter implementation of up to 10 points
2012-07-05 13:00:46 +10:00
cf2c546051
AP_Baro: show climb rate in baro test sketch
2012-07-05 13:00:45 +10:00
be3d035a64
AP_Motors: clarified some doxygen descriptions for TradHeli
2012-07-05 08:46:50 +09:00
6904bef611
Document++
2012-07-05 00:33:46 +02:00
8400bd67f8
Remove unused function
2012-07-05 00:33:10 +02:00
dc6d70bc15
SITL: added SIM_GPS_DELAY parameter
...
this allows a delay to be added to the gps data to test the impact on
AHRS/DCM
2012-07-04 21:05:22 +10:00
cac0757c2e
AP_AHRS: removed DCM_test example sketch
...
No longer required because it doesn't compile and is redundant anyway because the AP_AHRS_DCM class is tested in the AHRS_Test example sketch.
2012-07-04 18:22:51 +09:00
03516b7dfa
AHRS: make DCM drift correction not rely on accurate yaw
...
this uses a new formulation of the GPS based drift correction from
Bill Premerlani that rotates the error vector to avoid relying on
accurate yaw. This means we should get accurate roll/pitch correction
even with lots of magnetometer interference
It also makes it possible to fly a multicopter with no compass. It can
even navigate and correct yaw (slowly!)
2012-07-04 17:00:40 +10:00
6cf2e2fa13
AP_Math: cope with co-located waypoints in location_passed_point()
2012-07-04 14:24:04 +10:00
7be29c8b04
AP_Math: the windows arduino build is missing acosf()
2012-07-04 14:14:58 +10:00
8fa1acb141
AP_Math: add include of math.h
...
this is needed for location.cpp
2012-07-04 13:59:23 +10:00
597170afdc
DataFlash: fixed SITL build
2012-07-04 13:44:01 +10:00
c6ff292721
DataFlash: fallback to BlockErase if ChipErase fails
...
The errata on the APM2 dataflash chip says that ChipErase may not work
on some chips
2012-07-04 12:42:46 +10:00
84a489498d
Math: added location functions to math library
...
these do common calculations on struct Location
2012-07-04 12:42:46 +10:00
e0685f4408
AHRS: make P gain on PI roll/pitch controller tunable
...
this is to make it easier for Craig and Alan to tune
2012-07-04 12:42:46 +10:00
1142ec0665
AP_Mount: removed unused enum
2012-07-03 10:39:34 +10:00
f150c645c8
Mount: enable mount control via eeprom parameters
...
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
2012-07-03 10:21:01 +10:00
7a77832f45
Baro: average over all pressure/temperature samples on MS5611
...
this allows us to use the MS5611 barometer at its full 100Hz sample
rate (80Hz for pressure, 20Hz for temperature). The pressure and
temperature values are averaged between reads without adding any
latency. Previously the driver would throw away values between
readings
This also fixes a race condition in reading from the SPI bus that
could lead to bad values from the barometer
2012-07-02 13:44:53 +10:00
f7b06e0a64
Baro: fixed build of MS5611 test code
2012-07-02 13:44:53 +10:00
2bd5cd3b9a
AnalogSource: added some example code
2012-07-01 15:01:05 +10:00
0341e0e5f0
SITL: added support for new analog source
...
removed analogRead() to prevent people using it
2012-07-01 15:01:05 +10:00
2046e396a2
AnalogSource: make the Arduino AnalogSource interrupt driven
...
this fixes several problems with reading analog sources:
- we were getting poor values because we didn't wait long enough for
an analog source to settle
- we wasted a lot of CPU cycles waiting for conversions
- we were not taking averages over many samples, which we did with
the old AP_ADC driver on the APM1
2012-07-01 15:01:05 +10:00
b5aa821071
AHRS: include the P terms in get_gyro()
...
this makes it more useful for navigation controllers
2012-06-29 21:54:09 +10:00
02b9ea4dfe
MPU6k: removed an unused variable
2012-06-29 21:54:09 +10:00
117bae9585
SITL: added SITL class for controlling simulation
...
this holds mavlink settable parameters for controlling sensor noise
levels
2012-06-29 15:10:51 +10:00
37494dda2b
AHRS: don't add the P terms in _omega
...
this can lead feedback via the _P_gain()
2012-06-29 15:10:51 +10:00
21ae2957fb
AHRS: disable barometer for vertical acceleration
...
this seems to have been the cause of the 'flips' seen by Marco and
others. Testing by Craig and Alan shows that the flips are gone when
the barometric acceleration is removed.
It looks like a 5 point average filter is not enough to keep the
vertical acceleteration noise low. With high noise in the z axes, the
x and y axes are scaled back when the ge vector is normalised.
2012-06-28 11:12:49 +10:00
e531061caa
AHRS: re-instate new DCM drift correction code
...
This reverts commit 078489638d47fbaffde7c51249e36b5a8fc4ef9d.
2012-06-28 11:09:22 +10:00
8600ad8d7f
AHRS: revert to the old drift correction algorithm
...
we need to work out why Craigs quad flipped today before we enable
this new drift correction
2012-06-27 18:16:41 +10:00
70bfacc350
SITL: removed an unused variable
2012-06-27 16:01:50 +10:00
57579e494b
Barometer: fixed airstart for APM
...
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
ce016b5ae8
AHRS: include P term in omega
...
thanks to Jon for suggesting this
2012-06-27 16:01:50 +10:00
0fa1f29cf3
AHRS: implement spin rate limits
...
this follows the method that Bill developed in his fastRotations
paper. We've demonstrated that this is indeed needed in APM, as we
were able to produce the 'dizzy' effects in both the ArduPlane and
ArduCopter simulator
2012-06-27 16:01:50 +10:00
3ffecc18d8
AHRS: cope with copters with no compass
...
if a copter doesn't have a compass, we can't use the GPS for gyro
drift correction
2012-06-27 16:01:50 +10:00
3458962184
GPS: test the more modern MTK16
2012-06-27 16:01:50 +10:00
426006d98f
SITL: fixed GPS heading in simulated UBlox
...
longitude scale does not apply to velocity->heading conversions
2012-06-27 16:01:50 +10:00
20c1baf585
SITL: changes UBlox simulation to 5Hz
...
this matches the real UBlox driver
2012-06-27 16:01:50 +10:00
d9583ae5eb
Compass: remove the need to call calculate() on the compass object
...
the new AHRS code doesn't use calculate() and the compass.heading
attribute. Instead it works on the raw magnetometer vector. This
change removes the internal calculate state from the compass object
and instead adds calculate_heading() for use by older code that
doesn't go via AHRS.
This significantly reduces the calculation involved in compass updates
The null offsets enable/disable code is also removed, as it is not
needed now that compass offsets are not linked to the AHRS state.
2012-06-27 16:01:50 +10:00
5370f9c411
AHRS: normalize the ge vector in drift correction, and use barometer
...
The normalisation ensures the error term scales uniformly with
different accelerations.
The barometer is used for vertical acceleration estimation
2012-06-27 16:01:50 +10:00
53e950531e
Baro: added get_altitude() and get_climb_rate() interfaces
...
this allows the barometer driver to calibrate and return altitude and
climb rate values. This will be used by the AHRS drift correction code
for vertical velocity
The climb rate uses a 5 point average filter
2012-06-27 16:01:50 +10:00
9fd3d15026
Filter: added 5 point average float filter
2012-06-27 16:01:50 +10:00
1ff9461bfb
AHRS: brought DCM more inline with Bill's implementation
...
omega_I applied continuously. _ki larger. Stop integrating when _omega.length()>20
The key change was the scaling of ge to ensure the error is not
quadratic
2012-06-27 16:01:49 +10:00
73faaddc1b
AHRS: first successful version of Bills new drift correction system
...
This makes 3 major changes:
1) fixes the scaling of the yaw drift correction term to fix the time
constant
2) don't integrate the mag vector over multiple readings
3) accumulate omega_I changes over 15 seconds before applying, to try
to prevent omega_I picking up short term responses
2012-06-27 16:01:49 +10:00
0399aa9480
AHRS: update for new _fly_forward flag
2012-06-27 16:01:49 +10:00
2600afe18a
AHRS: implement Bills new drift correction algorithm
...
this is an initial implementation of this paper:
http://gentlenav.googlecode.com/files/RollPitchDriftCompensation.pdf
2012-06-27 16:01:49 +10:00
5316a45c20
AHRS: added GPS support to AHRS test
2012-06-27 16:01:49 +10:00
19954f30e5
GPS: added velocity and acceleration components
...
used by AHRS for acceleration correction
2012-06-27 16:01:49 +10:00
2b352d2b5c
Math: added comment
2012-06-27 16:01:49 +10:00
f23cebc808
Math: moved more template functions to the .cpp files
...
save a bit more code space for larger functions
2012-06-27 16:01:49 +10:00
c034e38cbd
ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float)
2012-06-26 22:50:17 +09:00
abb6eb2471
Added a crude Lead Filter. Needs some fine tuning, lag specification, scaling. Works great on 4hz GPS such as Mtek.
2012-06-21 11:14:20 -07:00
cd0411ba33
Add linebreaks to increase readability.
2012-06-21 00:36:10 +02:00
be6923be0f
Improve parameters descriptive text
2012-06-21 00:20:37 +02:00
1ead5f1690
Documentation improvements, no functional changes (only comments)
2012-06-17 22:53:54 +02:00
8f646467e5
Move local temp variables to the stack it saves 1952 bytes
...
Add function comments
Only use _ on class member variables
Only point to a 3D GPS point if GPS has a fix
Implement MAV_MOUNT_MODE_MAVLINK_TARGETING
2012-06-17 22:25:51 +02:00
d9e6a1ece9
Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality
2012-06-15 08:40:14 +00:00
ceba24ff8f
Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality
2012-06-15 08:38:52 +00:00
b32726e867
GPS: need pgmspace.h for _write_progstr_block()
2012-06-15 16:27:11 +10:00
ae9883a8e2
GPS: fixed auto-config of UBlox setup with no UBX messages
...
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
2012-06-15 15:53:27 +10:00
b7e807cd58
FastSerial: added tx_pending() method
...
this allows the caller to wait for the tx buffer to drain
2012-06-15 15:53:27 +10:00
a12cb8fd9a
Added camera trigger functionality
2012-06-13 21:00:20 +02:00
f7ef60565e
Add "3 axis camera stabilization" and "point camera to 3D point" functionality
...
Patch by Gregory Fletcher and reviewed by me
2012-06-13 20:55:19 +02:00
e9226d6f0a
Spellcheck
2012-06-13 20:44:35 +02:00
fca914b7cf
AP_GPS_NMEA: fix from Roberto Navoni to improve NMEA accuracy
2012-06-12 20:27:50 +09:00
f9c5b135bc
GPS: use the new nav_setting in a couple of the sample sketches
2012-06-10 16:35:13 +10:00
0542539fc9
GPS: add stub settings for nav_setting in the other GPS drivers
...
only Ublox supports nav_setting so far
2012-06-10 16:34:53 +10:00
926dfbc0e9
GPS: added auto-configuration of UBlox GPS
...
the Ublox will now auto-configure for 5Hz with just the messages we
want. It also supports setting the navigation engine type
2012-06-10 16:34:13 +10:00
04a71197f9
FastSerial: avoid buffer re-allocation on re-open if possible
...
we commonly re-open serial ports a lot in the AUTO GPS driver
2012-06-09 07:43:22 +10:00
f347572fc2
SITL: map() is a C++ function, so needs to be in C++ part of the header
...
this fixes the ACM build
2012-06-08 17:09:23 +10:00
9adaacedcd
GPS: added debug code to the main GPS class
2012-06-08 16:42:03 +10:00
f4718cafad
GPS: re-open the serial port with a 256 byte serial receive buffer
...
this ensures all GPS parsers have a 256 byte buffer available
2012-06-08 16:42:03 +10:00
ddebf7b443
GPS: fixed the UBLOX parser to handle unknown messages
...
the parser was broken in several ways:
1) when it received an unknown message it didn't update the ck_a and ck_b fields, so it
thought the message had a bad checksum, which meant it got out of protocol sync
2) the read() method would return false if the last message from the GPS was of an unknown type.
So we relied on the last msg always being one that we understand and want
3) the parser considered any valid UBLOX message to be 'new data', whereas we only actually get
a new fix when we get box a new position and velned message
4) the total message size per update is more than 128 bytes, but the serial port was opened
with only a 128 byte buffer, so we got corruption regularly
2012-06-08 16:42:02 +10:00
148e59a4de
GPS: tidy up the auto gps test
2012-06-08 16:42:02 +10:00
f7be9a4b5d
TradHeli adding ramp up time to Ch8 Throttle Pass-through.
2012-06-07 22:55:47 -04:00
0c8078c436
AP_MotorsHeli Syntax correction.
2012-06-04 15:53:07 -04:00
43fe5bab78
re-enable the AP_Mount build
2012-06-04 19:32:11 +10:00
b4fbda7a28
GPS: fixed a race condition in the ublox driver
...
the status update comes as a separate message from the lat/lon
2012-06-04 14:47:58 +10:00
a6c1a86c23
mavlink: fixed build with uart resend
2012-06-04 13:45:55 +10:00
1ad17bc78c
MAVLink: updates to mavlink headers to fix mavlink 1.0 issues
2012-06-04 13:34:07 +10:00
4f7a80a04d
Mavlink: fixed library build for MAVLink 1.0
2012-06-04 13:14:52 +10:00
34234b7003
SITL: fixed SITL build with mavlink10
2012-06-04 13:14:52 +10:00
7602f698eb
mavlink10: fixed MAV_VAR -> MAVLINK_TYPE
2012-06-04 13:14:51 +10:00
2c3bfd896a
MAVLink: updated to latest upstream mavlink
...
this includes no significant changes
2012-06-04 13:14:51 +10:00
1ebfb8fe25
GPS time set to unsigned int32
2012-06-03 11:13:50 -07:00
bad6591e6d
AP_Baro: fixed comment to clarify that every-other call updates temperature or pressure
2012-06-03 17:31:17 +09:00
8f8e91a620
ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives.
...
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
2012-06-03 16:58:19 +09:00
080c5184d5
ArduCopter Desktop Build: added definition of "map" to wiring.h and included WMath.cpp to fix SITL build failures.
...
All real work on this issue done by Michael Oborne.
2012-06-02 17:46:00 +09:00
8f3169a200
AP_MotorsHeli: Added reference to "Arduino.h" to allow autotest builder to work.
...
Moved around initialisation of parmeters in AP_MotorHeli object to remove compiler warnings.
2012-06-02 16:13:23 +09:00
3246f2bad3
RC_Channel library: change all "int" types to "int16_t".
...
Fixes SITL compile error due to type mismatch of set_pwm between .h and .cpp file (this only occurs because on the SITL, "int" is actually "int32_t"
2012-06-02 14:20:58 +09:00
37e4637c13
RC_Channel.pde: fixed compile errors so that it actually works!
2012-06-02 14:00:44 +09:00
df3fb5c041
ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx).
2012-06-02 12:51:12 +09:00
477aa6e47a
RC_Channel fix for throttle output.
...
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
2012-05-31 14:59:03 -07:00
7ee38df5a2
Issue 416: RC_Channel – Fix to make dead_zones still output 0
2012-05-31 12:05:47 -07:00
2cc9fde3c9
removed never used filter, and fixed a constrain that could make range calcs go bad
2012-05-31 11:45:07 -07:00
00cabc6343
Channel rage fix - low output was always 0 vs _low
2012-05-31 11:31:48 -07:00
bafb478924
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
ffc04b7305
Fix TradHeli Collective Yaw Effect bug.
2012-05-25 15:25:21 -04:00
734dcebb2a
SITL: fixed ChipErase()
...
the loop never completed
2012-05-23 21:15:45 +10:00
5e0d937e50
SITL: fixed build with new ChipErase() call
2012-05-23 17:33:33 +10:00
c2fb8a7a98
DataFlash: use ChipErase() instead of PageErase() on all pages
...
This makes the DataFlash erase much faster (about 6 seconds instead of
about 60 seconds).
We need to test and ensure the behaviour is equivalent apart from the
speed
2012-05-22 19:29:02 -07:00
8f27297896
DCM: fixed a bug when using GPS for yaw correction
...
When using GPS for yaw correction we need to apply the x and y omegaI
corrections from the _omega_I_sum in the period before we get to the
minimum ground speed for GPS yaw correction. Otherwise we get a large
sudden omega_I change on takeoff.
2012-05-21 12:15:06 +10:00
37f652e19b
AP_Common: fixed some duplicate product ID warnings
2012-05-17 23:37:32 +10:00
eaeaa3811a
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
fe742f1c23
IMU: expose IMU_PRODUCT_ID as EEPROM Variable
...
this will allow us to log the Product ID in tlogs
2012-05-09 18:30:36 -07:00
Andrew Tridgell
Amilcar Lucas
Andreas M. Antonopoulos
Robert Lefebvre
rmackay9
Jonathan Challinger
Jason Short
Michael Oborne
Craig Elder
Wingspinner