Peter Barker
eed73749f9
Copter: move sending of send_pid_tuning up
2019-03-05 10:41:56 +11:00
Andrew Tridgell
ef3306d408
Copter: fixed crash on mavlink send before pos_control is allocated
2019-02-26 16:18:26 +11:00
Peter Barker
a48f461158
Copter: remove position-vector methods
...
Both were used in just one place
2019-02-26 14:09:21 +11:00
Peter Barker
5ff80e06d1
Copter: move update_sensor_status_flags into GCS subclasses
2019-02-19 14:09:59 +11:00
Peter Barker
039aa3f3b3
Copter: move sensor flags to be a GCS thing rather than a GCS_MAVLINK thing
2019-02-19 14:09:59 +11:00
Peter Barker
f759c7ac7e
Copter: GCS_MAVLink takes care of mavlink capabilities
2019-02-19 13:14:52 +11:00
Peter Barker
9bc23d3f28
Copter: move try_send_message of nav_controller_output up
2019-02-19 10:08:00 +11:00
Peter Barker
0dce6172f2
Copter: use visual odometry singleton
2019-02-15 16:56:13 +11:00
Peter Barker
13db459f49
Copter: remove redundant home-setting sanity checks
2019-02-15 08:28:45 +11:00
Peter Barker
5ae52038fa
Copter: make setting of home boolean in preparation for sanity checks
2019-02-15 08:28:45 +11:00
Peter Barker
270fa2dfb9
Copter: move handling of command-int MAV_CMD_DO_SET_HOME up
2019-02-13 09:42:26 +11:00
Peter Barker
3765bae5e0
Copter: remove checking for coordinate frames
...
This is very much NFC. This change uncovers previous dead code in the
case that we are not ignoring yaw.
2019-02-12 09:07:50 +09:00
Peter Barker
243cf690da
Copter: use altitude frame mapping function
2019-02-12 09:07:50 +09:00
Peter Barker
47a0796684
Copter: move handling of fence point handling up
2019-02-08 11:47:59 +09:00
Peter Barker
727d42be1c
Copter: move handling of MAV_CMD_DO_SET_FENCE_ENABLED up
...
This has the effect of losing the statustext messages. We should not be
sending statustext messages for things that complete successfully, and
this data is available in the fence_status mavlink message (and in
SYS_STATUS too)
2019-02-08 11:47:59 +09:00
Peter Barker
587e02e92e
Copter: remove pv_ functions that duplicate Location functions
2019-02-06 11:02:50 +09:00
Peter Barker
609b4f87c5
Copter: move handling of RC_CHANNELS_OVERRIDE up
2019-02-05 13:59:21 +11:00
Peter Barker
7197cf9e5c
Copter: move sending of sys_status message up
2019-02-05 11:07:39 +11:00
Randy Mackay
42c7f5ceb4
Copter: integrate WPNAV::set_speed_z split to set_speed_up and set_speed_down
2019-01-31 19:34:32 +09:00
Randy Mackay
717fb4d823
Copter: integrate AC_WPNav::get_speed rename to get_default_speed
2019-01-31 19:34:32 +09:00
Peter Barker
1412921561
Copter: move sending of fence_status message up
2019-01-31 13:44:29 +09:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
845f015648
Copter: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Peter Barker
f48d757bd4
Copter: adjust for location flags being moved out of union
2019-01-16 11:45:29 +11:00
Michael du Breuil
6bb84bfcc5
Copter: Remove unneeded GCS rally override
2019-01-08 10:39:50 +11:00
Peter Barker
8626c9573a
Copter: split SIMSTATE, AHRS2 and AHRS3 onto their own ap_message ids
2018-12-19 13:19:23 +11:00
Peter Barker
56ec2691ae
Copter: split DISTANCE_SENSOR onto its own ap_message id
2018-12-19 07:24:37 +11:00
Peter Barker
bfc82fb1d8
Copter: try_send_message caller checks telemetry_delayed
2018-12-18 14:25:56 +11:00
Peter Barker
f8a05564e8
Copter: split SYS_STATUS and POWER_STATUS onto separate ap_messages
2018-12-18 14:05:20 +11:00
Peter Barker
0e6efd6de0
Copter: move accept_packet to GCS_MAVLink base class
2018-12-14 12:44:31 +11:00
Peter Barker
8ac5ee02ea
Copter: GCS_MAVLink now uses Mission singleton
2018-12-13 10:52:52 +09:00
Peter Barker
ca2a49c1c6
Copter: split MSG_SCALED_PRESSURE into three separate messages
2018-12-12 21:36:01 +11:00
Peter Barker
ff89000e96
Copter: split MSG_RAW_IMU1 into per-IMU ap_messages
2018-12-10 12:52:41 +09:00
Peter Barker
3d8588a636
Copter: send both SYS_STATUS or POWER_STATUS or neither
2018-12-10 12:52:41 +09:00
Peter Barker
75fb9780f7
Copter: rename send_extended_status1 to send_sys_status
2018-12-10 12:52:41 +09:00
Peter Barker
05f2e51b4d
Copter: adjust for new update entry points into GCS
2018-12-10 12:52:41 +09:00
Peter Barker
924b278120
Copter: add parameter stream to list-of-all-streams
2018-12-10 12:52:41 +09:00
Peter Barker
41ead10d22
Copter: rename MSG_EXTENDED_STATUS2 to MSG_MEMINFO
2018-12-04 18:01:38 +11:00
Peter Barker
7e76871b9e
Copter: rename MSG_RAW_IMU2 and MSG_RAW_IMU3 to reflect what they send
2018-12-04 17:45:32 +11:00
Peter Barker
ee5339f931
Copter: remove pointless wrappers around gcs functions
2018-11-23 10:56:17 +11:00
Peter Barker
33d40500ac
Copter: move sending of optical flow status up to base class
2018-11-13 10:40:23 +11:00
Peter Barker
73940df48e
Copter: move mission into mode_auto
2018-11-09 13:35:40 +09:00
Peter Barker
72440e2af3
Copter: allow VFR_HUD.alt to be relative-alt if DEV_OPTIONS has bit 2 set
2018-11-06 11:26:38 +09:00
Peter Barker
1d322046b0
Copter: tidy up send_pid_tuning
2018-11-06 08:19:15 +09:00
Peter Barker
7c86ce4d81
Copter: change default streamrate for ADSB from 5 to 0
...
No other stream has a default streamrate in Copter.
This causes us small amounts of overhead as it marks all channels as
streaming.
2018-11-05 14:57:55 +09:00
Peter Barker
859f4828a1
Copter: move handling of gimbal messages up
...
Copter: move handling of mav_cmd_do_mount_control up
Copter: move handling of deprecated mount messages up
Copter: move handling of command_do_set_roi up
Copter: move handling of command_do_set_roi up
Copter: mount no longer takes ahrs in constructor
2018-10-30 17:19:14 +11:00
Peter Barker
1a660cefae
Copter: remove unused STREAM_RAW_CONTROLLER_msgs variable
2018-10-16 10:17:12 +11:00
Sam Bristow
823d09b212
Copter: Fix confusing indentation
...
Commit d94663d5
introducted a minor whitespace issue which made the
indentation of the nested if statements slightly confusing. We may as
well clean it up sooner rather than later :-)
2018-10-15 16:32:15 +11:00
chobitsfan
d94663d5af
Copter: support changing vertical speed in DO_CHANGE_SPEED
2018-10-13 13:16:26 +09:00
Raouf
46b669a056
Copter: send obstacle_distance messages to proximity lib
2018-10-02 10:37:13 +09:00
Peter Barker
a30cdf6806
Copter: eliminate failsafe.rc_override_active
...
Use RC_Channels::has_active_overrides() instead
2018-09-05 11:54:32 +10:00
Peter Barker
ec6c59faa3
Copter: move handling of disable-gcs-rc-overrides-channel-option up
2018-09-05 11:54:32 +10:00
Peter Barker
f005ee4a4c
Copter: use camera singleton to get camera rather than callback
2018-08-31 15:48:56 +10:00
Peter Barker
ec52c22c7c
Copter: GCS_MAVLink uses compass singleton, stop implementing get_compass
2018-08-31 15:48:56 +10:00
Randy Mackay
920300899e
Copter: rename gcs_check_input to gcs_update
...
this makes the names consistent with Rover and Plane
2018-08-24 15:30:50 +09:00
Matt
fd332287b2
COPTER: Add mavlink landing gear control
...
Add MAV_CMD_AIRFRAME_CONFIGURATION (# 2520), which is for landing gear
control.
Param 1 is not used in ArduPilot
Param 2 is deploy/retract. 0 is deploy, 1 is Retract
2018-08-03 10:59:15 +09:00
Peter Barker
819d892baf
Copter: handle MAV_CMD_ACCELCAL_VEHICLE_POS in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
7fc580921a
Copter: handle command_long in GCS base class
2018-07-06 09:43:09 +10:00
Peter Barker
aa4ee64af2
Copter: handle command_int in base class
2018-07-06 09:43:09 +10:00
Peter Barker
df83cb034e
Copter: use ArmingMethod enumeration
2018-07-03 15:16:38 +10:00
Peter Barker
c84b102c1c
Copter: move mavlink reboot code up to base class
2018-07-03 12:12:25 +10:00
Peter Barker
cff1969a29
Copter: make do_user_takeoff a member of Mode
2018-06-26 09:11:21 +09:00
Peter Barker
70d159cb38
Copter: raise EKF failure even if USB is connected
...
This will let EKF go bad if your PixHawk is connected to your laptop.
This doesn't seem to be a problem for the other vehicles.
This also allows the EKF to go bad in-flight if you happen to have
connected (against AP's recommendations) your companion computer to your
flight controller via USB. Since people do this, it is better to have
the checks than not.
2018-06-26 10:07:55 +10:00
Pierre Kancir
2d5cbd2cf8
ArduCopter: report crosstrack_error
2018-06-26 08:42:14 +09:00
Andrew Tridgell
b43316d743
Copter: added ESC_TELEMETRY to mavlink streams
2018-06-21 10:48:02 +10:00
Peter Barker
ca8a1ae488
Copter: use magic force arm/disarm definitions
2018-06-20 11:43:38 +10:00
Peter Barker
fd9ce90b8e
Copter: option to force arm, bypassing checks
2018-06-20 11:43:38 +10:00
Peter Barker
4d6408857f
Copter: return appropriate response to failed disarm
2018-06-20 11:43:38 +10:00
Peter Barker
485cafb343
Copter: use AP_FWVersion singleton
2018-06-18 19:10:37 +01:00
Peter Barker
955baa47c2
Copter: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Michael du Breuil
6c94811e00
Copter: Update to support new RC override conventions
2018-06-05 09:51:09 +10:00
Peter Barker
78d2c52a3f
Copter: move try_send_message handling of EKF_STATUS_REPORT up
2018-06-01 16:12:45 +01:00
Peter Barker
7c98082389
Copter: create persist_streamrates() callback to indicate persistence
2018-05-29 13:08:29 +10:00
Peter Barker
5f2221fe74
Copter: move handling of VFR_HUD into GCS_MAVLink_Copter
2018-05-29 13:00:40 +10:00
Peter Barker
81e9edd80a
Copter: move sending of sim state up
2018-05-23 18:36:50 +10:00
Peter Barker
ec1539f9c8
Copter: add type-correctness for stream messages
2018-05-22 11:21:25 +10:00
Peter Barker
de7a8e20e2
Copter: eliminate MSG_LIMITS_STATUS
2018-05-22 09:05:14 +09:00
Peter Barker
50ca76b6bd
Copter: move try_send_message of servo-output-raw up
2018-05-21 19:08:08 +01:00
Peter Barker
7c8583d51d
Copter: implement sending of position_target_global_int
2018-05-18 20:26:37 +10:00
Peter Barker
33582107b6
Copter: move sending of GLOBAL_POSITION_INT up to GCS_MAVLINK
2018-05-17 15:48:06 +01:00
Peter Barker
da1b2579c4
Copter: move send_attitude up to GCS_MAVLINK
2018-05-17 18:28:43 +10:00
Peter Barker
e4a2b03488
Copter: move try_send_message sending of scaled_pressure up
2018-05-17 15:37:14 +10:00
Peter Barker
88883c7c7f
Copter: move try_send_message sending of sensor offsets up
2018-05-17 15:37:14 +10:00
Peter Barker
93f1815d50
Copter: move try_send_message of RAW_IMU up to GCS_MAVLINK
2018-05-17 15:37:14 +10:00
Peter Barker
9dce133938
Copter: handle setting of ekf origin in GCS_MAVLink
2018-05-17 10:13:42 +10:00
Michael du Breuil
fe8e1b4274
Copter: Move MAVLink rangefinder up to parent
2018-05-16 23:21:41 +01:00
Michael du Breuil
033a8ec4d5
Copter: Send all distance sensors
2018-05-16 23:21:41 +01:00
Peter Barker
ec6fb0c612
Copter: move sending of battery data up
2018-05-09 11:40:31 -07:00
Peter Barker
e90ce4ced9
Copter: move data stream send up
2018-05-09 16:15:38 +10:00
Peter Barker
dee40f3fe5
Copter: make scheduler track whether it has called the delay callback
2018-05-09 16:15:38 +10:00
Peter Barker
6dd9f50f7c
Copter: move try_send_message handling of RC_CHANNELS up
2018-05-08 12:33:32 +01:00
Peter Barker
75ad33ddcd
Copter: move try_send_message of heartbeats up to GCS_MAVLINK
2018-05-07 11:30:13 -06:00
Peter Barker
d7af5c0c44
Copter: move try_send_message handling of VIBRATION up
2018-05-07 11:23:28 -06:00
Dr.-Ing. Amilcar do Carmo Lucas
c8d1dad493
Copter: document stream content
2018-04-27 19:54:00 +09:00
Peter Barker
4b5953734d
Copter: use AP_ServoRelayEvents singleton
2018-04-18 20:31:55 +09:00
Peter Barker
ba8b3e2415
Copter: create an AutoYaw helper object to hold auto-yaw state
2018-04-18 13:27:43 +09:00
Michael du Breuil
d96919ed21
Copter: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Michael du Breuil
adb7ecef92
Copter: Check MANUAL_CONTROL target
2018-04-10 16:54:34 +01:00
Francisco Ferreira
8ff74f31e9
Copter: fix method shadowing
2018-04-03 16:29:33 +01:00
Peter Barker
0c8110ecb2
Copter: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Peter Barker
d58e2214d2
Copter: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
cca4d5136e
Copter: move common calibration functions up
2018-04-02 23:25:05 +01:00
Peter Barker
c80714b820
Copter: factor out preflight calibration function
2018-04-02 23:25:05 +01:00
Dr.-Ing. Amilcar do Carmo Lucas
d633ba8c46
Copter: Add option to disable RPM module
2018-03-30 09:36:48 +09:00
Peter Barker
ce0f0938ee
Copter: make superclass handle command_ack packets
2018-03-28 09:28:23 +09:00
Michael du Breuil
291531e056
Copter: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Peter Barker
f8d5fe96d8
Copter: allow DataFlash to handle log sending
2018-03-26 09:22:47 +09:00
Peter Barker
41960704b0
Copter: move handling of visual odometry messages up
2018-03-23 09:28:07 +09:00
Peter Barker
edcfa7ffd4
Copter: move handling of get_home_position up
2018-03-19 10:32:37 +09:00
Peter Barker
45f2312bfe
Copter: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
d88bd52a53
Copter: use baro singleton
2018-03-08 21:20:05 -08:00
Peter Barker
9bffeb4117
Copter: use AHRS singleton in GCS_MAVLink
2018-03-07 12:34:39 +00:00
Peter Barker
af56826107
Copter: follow mode fixups
...
add follow to FLTMODEx param descriptions
remove follow's set_velocity method
10hz logging of desired velocity in follow mode
follow mode uses pos error P gain
add send-debug-via-mavlink option
don't enter follow if follow lib is disabled
follow debug slowed to 1hz
disable follow on min-features builds
2018-03-05 15:08:08 +09:00
Randy Mackay
6ee101ca98
Copter: rename chase to follow
2018-03-05 15:08:08 +09:00
Randy Mackay
053983eb70
Copter: integrate AP_Follow into chase mode
2018-03-05 15:08:08 +09:00
Peter Barker
199455dc56
Copter: add chase mode
2018-03-05 15:08:08 +09:00
Peter Barker
86b162e32f
Copter: add option to disable BRAKE flight mode
2018-02-27 07:43:13 +09:00
Peter Barker
b8c432b1a1
Copter: add option to disable GUIDED flight mode
...
Saves about 6kB of flash
2018-02-27 07:43:13 +09:00
Peter Barker
b9ad2bc8db
Copter: add option to disable AUTO mode
...
Saves ~12k of flash
2018-02-27 07:43:13 +09:00
Peter Barker
eb9bbddcb7
Copter: add in_guided_mode mode callback
2018-02-27 07:43:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
def098bd8a
Copter: obey ADSB_ENABLED == DISABLED
2018-02-21 22:11:34 +09:00
Peter Barker
bfc373aeff
Copter: move logging of PM messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Randy Mackay
9eda7f4e31
Copter: global-pos-int uses system time
2018-02-13 08:52:48 +09:00
murata
296ee7315b
Copter: minor formatting fixes
2018-02-12 12:17:05 +09:00
murata
c31c2a4cf1
Copter: optionalize the winch
2018-02-12 12:16:57 +09:00
Peter Barker
40d74584ac
Copter: remove shims used in scheduler
2018-02-12 11:19:34 +09:00
Andrew Tridgell
af4f0c29ba
Copter: enable TMODE (ToyMode) support
...
this is for the skyviper button based transmitter control
2018-02-08 17:36:33 +11:00
Andrew Tridgell
1f76f69d80
Copter: implement per-motor compass compensation
2018-02-08 17:36:33 +11:00
Pierre Kancir
10e6fe43dd
Copter: Add a switch option to enable/disable RC_Override
2018-01-24 21:37:41 +09:00
Randy Mackay
8d6f8e4d9c
Copter: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Alexey Bulatov
8accfb97f6
ArduCopter: Check for nullptr for motors class pointer
...
Because of added initialisation of UAVCAN send_heartbeat function
starts before motors initialisation. So we need check is object created.
2018-01-17 07:24:17 -08:00
Matt
c0f0e3eca3
COPTER: Fix MOUNT_CONTROL yaw in guided
...
If the mount instance does not support yaw/pan, the copter needs to yaw in
response to MSG_MOUNT_CONTROL and MAV_COMMAND_DO_MOUNT_CONTROL commands from
a GCS or co-computer. There was no checking for mount pan in the GCS_Mavlink
logic. As such, no yaw takes place when a mount control command calls for it.
This patch impliments copter yaw control for both MSG_MOUNT_CONTROL and
MAV_COMMAND_DO_MOUNT_CONTROL in copter GCS_Mavlink.
2017-12-23 10:57:31 +09:00
Peter Barker
6c82f7671d
Copter: move all commands logic into AUTO flightmode
2017-12-14 14:08:01 +09:00
Randy Mackay
2d23e1f7c7
Copter: rename flightmode_ objects to mode_
2017-12-12 10:39:26 +09:00
Peter Barker
103e2cc711
Copter: calculate wp bearing and distance on demand
...
Move responsibility for calculating wp bearing/distance
into the FlightMode object doing the navigation
Calculating these variables was being done at 50Hz where they
were used at 10Hz max.
2017-12-07 07:43:08 +09:00
Peter Barker
51cd143012
Copter: FlightMode - convert BRAKE flight mode
2017-12-06 08:24:24 +09:00
Peter Barker
2db09ba0f7
Copter: FlightMode - convert GUIDED flight mode
2017-12-06 08:24:24 +09:00
Peter Barker
e2b70c3a0a
Copter: FlightMode - convert AUTO flight mode
2017-12-06 08:24:24 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
ce3197e0ac
Copter: use the return code of the guided_set_destination_posvel() function calls
2017-12-05 08:57:55 +09:00
Peter Barker
398d07a68a
Copter: tighten return types of mavlink functions and variables
2017-12-01 17:01:10 +00:00
Randy Mackay
8d2db3218c
Copter: minor comment fix to code handling SET_POSITION_TARGET msgs
2017-11-27 14:24:30 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
bde1aaa2f6
Copter: Rename variable to correct the meaning (NFC)
2017-11-27 14:17:21 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
8678d13e7b
Copter: Update the result of a MavLink message, this is a NFC
...
The result variable is not used, but at least it gets documented :)
2017-11-27 14:17:21 +09:00
Andrew Tridgell
a644cff921
Copter: support testing multiple motors with motortest
...
this matches the quadplane behaviour, allowing a sequence of motors to
be tested
2017-11-27 10:15:31 +09:00
Peter Barker
8f48b3187e
Copter: use gps singleton for GCS function
2017-11-15 13:43:03 +00:00
Randy Mackay
842eed5426
Copter: accept do-winch commands with max rate
2017-10-27 09:20:38 +09:00
Randy Mackay
787954fa37
Copter: integrate winch library
...
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Andrew Tridgell
f49ab44f25
Copter: support simple accel calibration
2017-10-10 10:57:38 +11:00
Lucas De Marchi
4ef5186733
ArduCopter: do not include version.h/ap_version.h
...
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Randy Mackay
a8a5c1d332
Copter: command-long DO_SET_HOME check first param is zero
...
Also do not use current location just because lat,lon,alt are all zero
2017-09-20 12:14:38 +09:00
Randy Mackay
d982cfed4a
Copter: accept DO_SET_HOME within COMMAND_INT
2017-09-20 12:14:38 +09:00
Randy Mackay
70cf21a5ba
Copter: accept more mav-frame types
...
accept mav frames whether or not they have _INT appended
2017-09-20 12:14:38 +09:00
Peter Barker
0afe1e7473
Copter: move handling of SET_GPS_GLOBAL_ORIGIN up
2017-09-19 15:44:23 +09:00
Randy Mackay
1b3cc9289b
Copter: support SET_GPS_GLOBAL_ORIGIN
...
also remove setting of origin from DO_SET_HOME command
initialise ekf_origin location when consuming SET_GPS_GLOBAL_ORIGIN
set_ekf_origin performs sanity check on location
2017-09-19 10:30:15 +09:00
Peter Barker
6b5fd5fbdd
Copter: move gcs_out_of_time into GCS object
2017-09-12 18:28:07 +01:00
squilter
4b57a4a231
Copter: rename SafeRTL to SmartRTL
2017-09-09 14:05:41 +09:00
Randy Mackay
8df042f00c
Copter: complete addition of SafeRTL flight mode
2017-09-09 14:05:41 +09:00
Peter Barker
3f67dfe4fe
Copter: move handling of do_send_banner up
2017-08-30 15:54:47 +01:00
Peter Barker
3da70f19c1
Copter: handle param_request_list in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
e6ac68fd2a
Copter: handle param_set in GCS_MAVLINK base class
2017-08-30 15:54:47 +01:00
Peter Barker
bb06db6389
Copter: move send_autopilot_request calls up to GCS base class
2017-08-30 15:54:46 +01:00
Peter Barker
470e790117
Copter: add constant structure holding firmware version
2017-08-30 15:54:46 +01:00
Peter Barker
19e409f7f4
Copter: move serial_control case to base class
2017-08-17 12:42:31 +01:00
Peter Barker
6db348bab3
Copter: move play_tune and led_control handling to base class
2017-08-17 12:27:10 +01:00
Peter Barker
aa06fc499c
Copter: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:58:10 +10:00
Michael du Breuil
5cfe4d5a8c
Copter: Expose the AFS instance to MAVLink
2017-08-15 15:14:56 +01:00
Peter Barker
55af774e98
Copter: send gps messages as separate queued messages
2017-08-09 16:18:22 +01:00
Peter Barker
56160a8bbd
Copter: move sending of gps_raw up
2017-08-09 16:18:22 +01:00
Peter Barker
ff81186951
Copter: move sending of system_time up
2017-08-09 16:18:22 +01:00
Peter Barker
7ca146878d
Copter: move sending of camera_feedback up
2017-08-09 16:18:22 +01:00
Peter Barker
da889bdff5
Copter: move sending of meminfo up
2017-08-09 16:18:22 +01:00
Peter Barker
c36a20ab54
Copter: use new retry_deferred method
2017-08-05 23:14:31 +01:00
Peter Barker
db080ed60e
Copter: stop sending MSG_SERVO_OUT messages
...
This didn't ever result in a message being sent on Copter
2017-08-03 14:34:33 +01:00
Peter Barker
7c37bb324b
Copter: move try_send_message queued_param_send up
2017-08-03 14:34:33 +01:00
Peter Barker
431e3443bd
Copter: move try_send_message send_hwstatus up
2017-08-03 14:33:37 +01:00
Peter Barker
3e5665735f
Copter: move try_send_message mission handling up
2017-08-03 14:24:47 +01:00
Peter Barker
2a62b57e11
Copter: move try_send_message compass message handling up
2017-08-03 14:24:46 +01:00
Peter Barker
4b63443633
Copter: correct misleading comment
2017-08-03 14:24:46 +01:00
Peter Barker
31b33b2232
Copter: base SYS_STATUS load average on variable loop rate
2017-08-01 19:39:27 +01:00
Peter Barker
f56c9bd96d
Copter: move common mavlink camera handling up
2017-07-28 14:32:58 +01:00
Peter Barker
cdf9ebcb39
Copter: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Peter Barker
192310a68e
Copter: move gps inject handling up to GCS_MAVLINK
2017-07-27 12:03:25 +01:00
Peter Barker
f1ab50d4ea
Copter: handle common GPS messages in base GCS_MAVLINK class
2017-07-25 14:00:45 +01:00
khancyr
88aa1e447a
Copter: adapt to new send_proximity API
2017-07-24 13:44:43 +01:00
khancyr
49755063ab
Copter: move send_proximity to GCS common code (NFC)
2017-07-24 13:44:43 +01:00
Peter Barker
eb0edc9b5b
Copter: remove MSG_STATUSTEXT entirely
2017-07-18 16:12:59 +01:00
Peter Barker
ad1c379445
Copter: move handling of PREFLIGHT_SET_SENSOR_OFFSETS up
2017-07-17 14:17:19 +01:00
Peter Barker
fe16691c6e
Copter: move handling of MAG_CAL command longs up
2017-07-17 14:17:19 +01:00
Peter Barker
ecda9116ba
Copter: move MAV_CMD_START_RX_PAIR handling to base class
2017-07-17 14:17:19 +01:00
Peter Barker
b14964eb1e
Copter: move mavlink support for servo/relay up
2017-07-16 23:56:00 +01:00
Peter Barker
3e3a8717c5
Copter: add common handling of mavlink command messages
2017-07-16 23:56:00 +01:00
Peter Barker
480a83fdef
Copter: move rally-point handling up
2017-07-14 01:28:05 +01:00
Peter Barker
7bb28175d7
Copter: remove unneeded telemetry_delayed parameter
2017-07-12 17:01:36 +01:00
Peter Barker
016eeaa258
Copter: move handling of incoming statutext messages up
2017-07-12 16:52:24 +01:00
Randy Mackay
2b98fd765d
Copter: guided_set_destination accepts relative yaw
2017-07-12 13:27:45 +09:00
Randy Mackay
4c9e118ceb
Copter: set_auto_yaw_look_at_heading takes bool for relative angle arg
...
No functional change
2017-07-12 13:27:45 +09:00
kouseii
4dd7d9eaff
Copter: guided mode supports heading and yaw-rate target
2017-07-12 13:27:45 +09:00
Peter Barker
8a1fc6a406
Copter: remove global static send_statustext_chan
2017-07-11 23:53:53 +01:00
Peter Barker
3660236a0d
Copter: move common mission handling up to GCS_MAVLINK
2017-07-11 23:45:16 +01:00
Peter Barker
358555446b
Copter: eliminate gcs_send_mission_item_reached wrapper
2017-07-11 23:45:16 +01:00