Commit Graph

504 Commits

Author SHA1 Message Date
Emile Castelnuovo 1d28acd182 VRBRAIN: Added missing files. Added *.vbrain files to git ignore. 2014-04-08 16:19:20 +10:00
Emile Castelnuovo 7fe4847b6c VRBRAIN: Added NuttX driver vroutput for PWM out
Modified script rc.APM to launch modules vrinput and vroutput
Modified startup scripts to run APM without SD
2014-04-08 16:19:20 +10:00
Emile Castelnuovo 01b7bcd05d mk: new VRBRAIN board definition 2014-04-08 16:19:20 +10:00
Emile Castelnuovo bbe0362600 mk: new make files for VRBRAIN 2014-04-08 16:19:19 +10:00
Andrew Tridgell fb70ecb9d4 build: added -obc supplementary target 2014-04-07 07:28:50 +10:00
NosDE 613fda4889 PX4: enabling mkblctrl for fmuv1/fmuv2
See the comments in mk/PX4/ROMFS/init.d/rc.APM for details
2014-03-29 06:45:30 +11:00
Andrew Tridgell f31183f22d build: added APM_BUILD_DIRECTORY define to build
this makes it possible to have different default parameter values for
different vehicle types in libraries, as long as you use the makefile
based build
2014-03-26 12:15:31 +11:00
Andrew Tridgell 11956ece7c PX4: make compass calibrate fail non-fatal
until we sort out what is going on with compass calibration failures
this is the best option
2014-03-11 13:32:47 +11:00
Mike McCauley 55cf4b2111 mk: added HIL_MODE defitinition for Flymaple 2014-02-17 05:56:37 +11:00
Andrew Tridgell 082a3561c4 build: make hil equal hilsensors 2014-02-15 05:29:46 +11:00
Andrew Tridgell d3088b230a PX4: use RGBLED state to show startup state
solid white while booting, solid red on error
2014-02-04 21:43:47 +11:00
Andrew Tridgell e037b37880 PX4: added "make px4-cleandep" for faster rebuilding between branches 2014-01-22 17:15:34 +11:00
Andrew Tridgell 02c98f901d PX4: run hmc5883 compass calibration on every boot
this gives us more consistent compass readings between boots
2014-01-22 17:15:34 +11:00
Andrew Tridgell 792667e311 PX4: test MTD device on boot
full rwtest on FMUv2, read test on FMUv1
2014-01-16 13:11:14 +11:00
Andrew Tridgell 950bb09735 PX4: enable MTD on FMUv1 as well 2014-01-15 19:33:14 +11:00
Andrew Tridgell 7a02c2720b PX4: added defines for PX4 and NuttX version in logs 2014-01-14 15:35:41 +11:00
Andrew Tridgell 9d09a96377 PX4: don't write to BOOT.LOG unless we have errors
this gets us to zero writes to microSD when no errors and not armed
2014-01-14 13:57:59 +11:00
Andrew Tridgell db19c8b410 PX4: start mtd driver on FMUv2 2014-01-14 12:46:27 +11:00
Andrew Tridgell db8b262939 PX4: enable mtd driver in build 2014-01-14 12:46:26 +11:00
Andrew Tridgell 8698ee43bb PX4: use BOOT.LOG instead of boot.log 2014-01-14 12:46:26 +11:00
Andrew Tridgell f7029e6587 px4: enable dual telemetry by default on FMUv1
this makes us compatible with wiring diagrams from PX4 site
2013-12-31 11:54:42 +11:00
Andrew Tridgell f3c36ccef1 px4: fixed IO build 2013-12-30 14:51:40 +11:00
Andrew Tridgell b59f2d4326 build: put px4io elf files in build directory 2013-12-28 10:17:47 +11:00
Andrew Tridgell 2e9e464c4b PX4: update FMUv1 bootloader to use USBID 0x10 2013-12-21 06:25:43 +11:00
Macrauder 62fcfd8d9b build: Use generic app descriptior for mac spotlight search
kMDItemKinde is a localized string, only in EN OSX versions the value
is Application, changed to generic ContentType metafild
2013-12-17 14:55:31 +11:00
Andrew Tridgell 5ca73785c8 PX4: added automatic IO firmware update
this avoids the px4io.loaded file on the SD card that confused many
users
2013-12-13 12:44:47 +11:00
Andrew Tridgell 829767bed2 PX4: change FMUv2 bootloader USB ID to 0x0011 2013-12-13 11:02:19 +11:00
Andrew Tridgell ceef872a51 build: fixed a build cmp warning 2013-12-11 17:29:27 +11:00
Andrew Tridgell 3c5dcc7862 PX4: added -Wno-packed
we know that packed data structures are not as efficient
2013-12-11 11:10:26 +11:00
Andrew Tridgell 56752f4027 build: reduced PX4 warnings and avoid rebuilding when possible 2013-12-11 09:59:41 +11:00
Andrew Tridgell 3ead86ee2d PX4: start all sensor types on PX4
this allows for secondary sensors
2013-12-09 17:34:06 +11:00
Andrew Tridgell f1bad032dd PX4: added support for the MPU6000 on the v2.4 Pixhawk 2013-11-28 21:32:12 +11:00
Andrew Tridgell 45bf96382c PX4: setup uartD on PX4
on FMUv1 enable uartD only if /fs/microsd/APM/uartD.en exists

on FMU2 always enable uartD
2013-11-23 19:29:22 +11:00
Andrew Tridgell 6448ff455f build: added new copter frame type 'single' 2013-11-13 09:21:21 +11:00
Andrew Tridgell 6deeca1cc0 build: support all copter frame types on all boards 2013-11-13 09:12:02 +11:00
Andrew Tridgell 18c3b16aa8 build: added GIT_VERSION define to Makefile build 2013-11-09 10:09:19 +11:00
Andrew Tridgell 145bbd1656 PX4: changed startup to fail if no px4io on FMUv2 2013-11-02 21:41:11 +11:00
Andrew Tridgell 561618b2b2 build: added -lrt for Linux build 2013-10-08 11:50:54 +11:00
Andrew Tridgell d73c49bebc build: override opt flags for Linux build 2013-09-28 21:24:03 +10:00
Andrew Tridgell 71d0b294c5 build: added -lpthread and SKETCHNAME in build 2013-09-28 21:24:02 +10:00
Andrew Tridgell 4c05848734 build: added Linux targets 2013-09-28 21:24:02 +10:00
Andrew Tridgell 06e29536f1 PX4: added auth command to the build 2013-09-27 15:44:31 +10:00
Andrew Tridgell 081a481a7c build: added flymaple-upload target 2013-09-25 15:46:55 +10:00
Andrew Tridgell 815be5ddfe build: fixed libmaple upload target 2013-09-24 13:51:28 +10:00
Andrew Tridgell 3df849b8d1 build: make flymaple port find libmaple in parent directory
saves some hassle for people following the instructions
2013-09-24 13:51:28 +10:00
Mike McCauley f90790a26c build: added build files for Flymaple port 2013-09-24 13:32:50 +10:00
Randy Mackay 8f16dbf95e PX4: start rgbled driver 2013-09-11 13:15:35 +09:00
Andrew Tridgell 905c84bb4c PX4: move PX4IO update to before any sensors start
this seems to make the update much more reliable, possibly as it
avoids an interrupt load from l3gd20 driver
2013-09-07 17:39:51 +10:00
Andrew Tridgell ef6407988b PX4: avoid nsh redirects in if statements
this helps avoid FAT filesystem corruption
2013-09-06 22:14:04 +10:00
Andrew Tridgell 7536e0759d PX4: enable rgbled on FMUv1 2013-09-06 08:15:31 +10:00
Andrew Tridgell 0c926c38b1 PX4: boot the FMU bootloader in ROMFS 2013-09-04 13:15:51 +10:00
Andrew Tridgell 474a6d1218 PX4: added FMU bootloader images to ROMFS
this makes it much easier for users to update their bootloaders
2013-09-04 12:53:56 +10:00
Andrew Tridgell 935546d80d PX4: setup build layout to assume PX4Firmware and PX4NuttX trees
both in directory above ardupilot
2013-08-30 13:32:23 +10:00
Andrew Tridgell 78e85b36a4 PX4: moved MAXOPTIMIZATION change to APM build system
simpler than patching Firmware
2013-08-30 13:01:34 +10:00
Andrew Tridgell 28fcb1666e PX4: fixed build for change in library layout 2013-08-30 13:01:34 +10:00
Andrew Tridgell 8efcf05835 PX4: start nsh on USB if SD card not inserted
useful for debugging
2013-08-30 13:01:34 +10:00
Andrew Tridgell f48acffc52 PX4: always rebuild module.mk
this allows for switching build between different vehicle types
2013-08-30 13:01:34 +10:00
Andrew Tridgell 699e188110 build: only use a build in $SKETCHBOOK for px4
for others it is more convenient to use /tmp, as quite a few scripts
rely on this
2013-08-30 13:01:34 +10:00
Andrew Tridgell 1230df8b0d PX4: try to start meas_airspeed driver 2013-08-30 13:01:33 +10:00
Andrew Tridgell 01e9122850 PX4: disable sensors module
this isn't needed for APM, and fails to build
2013-08-30 13:01:33 +10:00
Andrew Tridgell ad445379b5 PX4: speed up the build a lot
this avoids removal of built objects and dependencies by allowing the
PX4 build system to put all objects and dependencies in the per-board
build directories
2013-08-30 13:01:33 +10:00
Andrew Tridgell 34af601551 Build: move BUILDROOT inside SKETCHBOOK
this allows for relative paths in the px4 build
2013-08-30 13:01:33 +10:00
Andrew Tridgell 16b5f923ae PX4: remove the use of symlinks in PX4 build
this should make it more windows friendly
2013-08-30 13:01:33 +10:00
Andrew Tridgell f88bb5638b PX4: changes to startup after stacksize fix
we can redirect to FAT fs again, and remove the sleep lines
2013-08-30 13:01:33 +10:00
Andrew Tridgell 1137de1002 PX4: make upload targets depend on build targets
this allows for "make px4-v1-upload" for faster development cycles
2013-08-30 13:01:33 +10:00
Andrew Tridgell 02b8d3497e PX4: avoid writing px4io update log to SD card
this seems to be one of the causes of lockups of the FMU
2013-08-30 13:01:33 +10:00
Andrew Tridgell 2e75dd50be PX4: added a sleep before probing for PX4IO update
this makes boot more reliable for some unknown reason
2013-08-30 13:01:33 +10:00
Andrew Tridgell 50cc6b5445 PX4: implement APM/nostart in rcS
this keeps the same shell on nostart, avoiding relying on nshterm
2013-08-30 13:01:33 +10:00
Andrew Tridgell 1c1e7ed414 PX4: changed to new names for board modules 2013-08-30 13:01:33 +10:00
Andrew Tridgell 84b21eed78 PX4: fixed test logic for console 2013-08-30 13:01:33 +10:00
Andrew Tridgell 1853223f45 PX4: hide the mkdir error on boot 2013-08-30 13:01:33 +10:00
Andrew Tridgell 372c424605 PX4: added mathlib/math/filter module
needed for (unused!) l3gd20 driver
2013-08-30 13:01:33 +10:00
Andrew Tridgell 927bbc6527 PX4: enable nshterm and math/filter on FMUv2 2013-08-30 13:01:33 +10:00
Andrew Tridgell a0af499aa5 PX4: added nshterm command 2013-08-30 13:01:33 +10:00
Andrew Tridgell 200d310843 PX4: better error handling in startup script 2013-08-30 13:01:33 +10:00
Andrew Tridgell f45e0fe737 PX4: don't need hil module 2013-08-30 13:01:32 +10:00
Andrew Tridgell 0e0afbd756 PX4: allow NuttX tree to be in directory above Firmware tree 2013-08-30 13:01:32 +10:00
Julian Oes 3b9d71ae8a PX4: Changed the startup script to have mavlink on USART2 / Serial 1 on FMUv2 2013-08-30 13:01:32 +10:00
Andrew Tridgell 16a3f0d47b PX4: only put one IO firmware in ROMFS
saves a bit of space. This also fixes makefile based upload
2013-08-30 13:01:32 +10:00
Andrew Tridgell 272057ff6d PX4: fixed build of v1 and v2 firmwares in one build
this does a clean on each build, which is horribly inefficient. To fix
that we need to work out what state information is preventing
switching targets in one build
2013-08-30 13:01:32 +10:00
Andrew Tridgell 0f5111caeb PX4: expand pass thru mixer to 8 channels
we're not using it now, but when we do use it we want all 8 channels
2013-08-30 13:01:32 +10:00
Andrew Tridgell d9d378f74e PX4: disable mixer load for now
loading a mixer disables IO output
2013-08-30 13:01:32 +10:00
Andrew Tridgell 6ce63da042 PX4: fixed airspeed build on FMUv1 2013-08-30 13:01:32 +10:00
Andrew Tridgell 0f8892e3b9 PX4: enable airspeed base driver and meas driver
this uses the new airspeed parent driver from Lorenz
2013-08-30 13:01:32 +10:00
Andrew Tridgell 3a6b7df23c PX4: disable bma180 driver for FMUv1 2013-08-30 13:01:32 +10:00
Andrew Tridgell 33aa91c0dc PX4: adapt rc.APM for FMUv1 and FMUv2 2013-08-30 13:01:32 +10:00
Andrew Tridgell 25b2cc7bf6 PX4: moved px4io-*.bin to ROMFS
this is more convenient than users having to copy it over
2013-08-30 13:01:32 +10:00
Andrew Tridgell d27b338e18 PX4: added io-v2 targets 2013-08-30 13:01:32 +10:00
Andrew Tridgell 140fc63a69 PX4: added px4-v2 targets 2013-08-30 13:01:32 +10:00
Andrew Tridgell bc6c5d0fb1 HAL_PX4: enable right FMUv2 drivers
ets_airspeed is ok, but mkblctrl driver doesn't build yet
2013-08-30 13:01:32 +10:00
Julian Oes ca29d543fd PX4: Added config file fmuv2 board, not used yet 2013-08-30 13:01:32 +10:00
Julian Oes 56e94d70e9 PX4: Adaptations to latest build changes 2013-08-30 13:01:32 +10:00
Marco Bauer ae2ee399c2 PX4: added support for mkblctrl driver
this enables runtime support for the mkblctrl I2C ESC drivers
2013-07-11 13:50:22 +10:00
Marco Bauer c7c0fc01c3 PX4: enable mkblctrl driver 2013-07-11 13:50:22 +10:00
Michael Woods 1c17bed1ef build: Adding a check for Darwin when adding avrdude.conf's flag for uploading. 2013-07-05 22:52:46 +10:00
Kevin Hester 6187c66147 PX4: A better error message in the log file when the px4io upgrade fails 2013-07-05 22:44:47 +10:00
John Boiles bb2a6b8a22 HAL_SITL: Fixing SITL build for OSX. 2013-07-05 22:36:57 +10:00
Andrew Tridgell 3b6bf49c84 PX4: fixed startup logging
echo has a very limited argument count
2013-06-27 10:49:54 +10:00
Andrew Tridgell d487b1170e PX4: log devices being used in boot.log 2013-06-24 21:51:31 +10:00
Andrew Tridgell 28ffa4059b PX4: added ARDUPILOT_BUILD define
will be used to avoid some code in the px4io driver
2013-06-24 21:51:17 +10:00
Andrew Tridgell 1132c0ae7c PX4: use PX4_ROOT=../PX4Firmware by default
this should make PX4 builds work out of the box on Windows for people who have used
the github for windows tool to download the two repositories
2013-06-24 12:37:18 +10:00
Kevin Hester 7652f403ea PX4: Remove -Os because I've changed the px4 tree to have that as the
default
2013-06-18 12:14:50 +10:00
Andrew Tridgell 48875a3e19 PX4: enable ets_airspeed driver if connected 2013-06-03 11:51:09 +10:00
Andrew Tridgell 109c1ca792 PX4: added eagletree I2C airspeed driver to the NuttX build
just needs a wrapper driver in APM now
2013-06-02 14:49:34 +10:00
Andrew Tridgell b91755318a HAL_PX4: play some tones on PX4IO firmware load
gives some chance of knowing if it worked
2013-06-01 12:41:28 +10:00
Andrew Tridgell 856d654601 PX4-build: cope with relative path in PX4_ROOT 2013-05-22 22:57:24 +10:00
Andrew Tridgell dd0630dc16 PX4: fixed handling of nostart option 2013-05-13 11:27:55 +10:00
Andrew Tridgell 01da926f04 PX4: don't start px4io twice 2013-05-11 21:07:27 +10:00
Andrew Tridgell 1248a49284 PX4: need led driver in build for latest upstream changes 2013-05-10 06:16:54 +10:00
Andrew Tridgell 3a66d304af PX4: changed EXTRAFLAGS to EXTRADEFINES for PX4 2013-05-10 06:16:54 +10:00
Andrew Tridgell 0acceb04ff build: added px4-archives target 2013-05-10 06:16:54 +10:00
Andrew Tridgell 06cf9def98 PX4: auto-build the archives if needed 2013-05-10 06:16:54 +10:00
Andrew Tridgell 73250efc01 build: added support for the new PX4 build system 2013-05-10 06:16:54 +10:00
Andrew Tridgell 9b752f5d2a PX4: added in remaining example mixers 2013-05-10 06:16:54 +10:00
Andrew Tridgell 947297f0cd PX4: added base ROMFS files from upstream 2013-05-10 06:16:54 +10:00
Andrew Tridgell 172faeea26 HAL_PX4: moved rc.APM to new ROMFS directory 2013-05-10 06:16:54 +10:00
Andrew Tridgell c612b4ad73 build-PX4: changed the PX4 build to use CONFIG_C99_BOOL8
this fixes bool behaviour to match C99, which some of the APM code
assumed, including simple mode in ArduCopter
2013-04-24 08:31:39 +10:00
Andrew Tridgell b05117f5cd build: fixed heli-hil and quad-hil copter builds 2013-04-17 21:39:22 +10:00
Andrew Tridgell 0af84177da px4: fixed passing of EXTRAFLAGS for ArduCopter frame type 2013-04-17 13:19:45 +10:00
Andrew Tridgell 7ad8670df7 SITL: show the build target
makes it easier to find the elf
2013-04-02 14:18:42 +11:00
Andrew Tridgell eb3c9ab79e build: fixed SITL build flags 2013-03-29 18:32:52 +11:00
Andrew Tridgell 4a56b4a145 build: fixed SITL build on windows 2013-03-28 13:23:30 +11:00
Andrew Tridgell 1d836db862 build: added all 7 copter frame types to binary build 2013-03-18 14:44:41 +11:00
Andrew Tridgell d06668f1cd build: added support for "make apm1-1280" 2013-03-12 12:45:49 +11:00
Randy Mackay 0bf6a52f7a Build: fix case of "com3" and add Arduino path override 2013-03-08 16:59:35 +09:00
Randy Mackay 66a4f6a1ec Build: MINGW can be used to build/upload apm hex 2013-03-08 15:53:09 +09:00
Stephen c4ea89b10a Build: Cygwin Windows build and upload fixes
SITL, HIL and normal builds and uploads work under Cygwin
2013-03-08 15:02:22 +09:00
Andrew Tridgell 7f1c8fd364 build: fixed cygwin build 2013-03-03 22:22:33 +11:00
Andrew Tridgell a77b5e9954 build: fixed eclipse build on Windows for PX4 2013-02-21 21:03:55 +11:00
Andrew Tridgell ded192be3f build: split up the build system to allow for better board support
this will make it easier to support boards like the VRBrain
2013-02-21 16:48:49 +11:00
Andrew Tridgell 899b91c162 build: fixed etags target 2013-02-11 13:52:37 +11:00
Andrew Tridgell 346f6cb903 build: fixed dependency generation for PX4 build 2013-01-22 09:49:57 +11:00
Andrew Tridgell 9efcdd7926 build: add CONFIG_APM=y to build
this allows us to disable some of the larger apps in the px4 build, to
save flash space
2013-01-22 07:49:12 +11:00
Andrew Tridgell 4200593206 build: added EXTERNAL_SCRIPTS to PX4 build 2013-01-21 08:27:02 +11:00
Andrew Tridgell 33bcd50284 build: added configure_px4fmu to clean target 2013-01-20 22:13:20 +11:00
Chris Gough 76ebcb9980 PX4 makefile: 'make configure_px4fmu' on px4 source before build
Pull Request #37
Ammended: squashed fixups down into a single commit

Signed-off-by: Pat Hickey <pat@moreproductive.org>
2013-01-19 11:13:40 -08:00
Andrew Tridgell d6ce86a746 PX4: fixed build on MacOS 2013-01-11 13:46:13 +11:00
Pat Hickey 892a322574 Arduino.mk: default config.mk port changed to ACM0 (for APM2) 2013-01-10 13:51:03 -08:00
Pat Hickey 268dd85319 Arduino.mk: more verbose default config file, with default HAL_BOARD apm2 2013-01-09 13:31:58 -08:00
Pat Hickey 7142368a97 mk: wibbles clean up output a little
clean up extra slash in /mk//Arduino.mk
etags can be .PHONY so we dont get errors about overriding existing recipie
2013-01-09 11:27:59 -08:00
Andrew Tridgell 534169d148 build: fixed up px4-clean to clean both trees 2013-01-02 17:51:48 +11:00
Andrew Tridgell 7daa697f4b build: move the main PX4 build logic to APM tree 2013-01-02 17:50:15 +11:00
Andrew Tridgell 92605a63ea build: give an error if PX4_ROOT not defined for PX4 build 2013-01-02 17:32:28 +11:00
Andrew Tridgell af647650c5 build: added makefile wrappers for px4 or AVR build 2013-01-02 17:28:09 +11:00
Andrew Tridgell 197583be9b build: force signed char
this was the default with the AVR compiler anyway, but this makes it
clearer what we assume
2013-01-02 14:45:09 +11:00
Andrew Tridgell 9b434d167c build: fixed CC build warnings 2013-01-02 10:19:55 +11:00
Andrew Tridgell 0186fabb3b build: allow building with the "Empty" HAL
useful for porting
2012-12-24 07:30:50 +11:00
Andrew Tridgell 0c38ba958a build: default to APM2 build 2012-12-22 13:05:12 +11:00
Andrew Tridgell f0dfcc1126 build: default to APM2 build 2012-12-22 13:02:42 +11:00
Andrew Tridgell 4ee969f439 Tools: fixed build_all.sh script 2012-12-20 14:52:37 +11:00
Pat Hickey 23d6c79313 Arduino.mk: fixes to obey HAL_BOARD in user's config.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell 97341cc4a5 Build: added targets.mk 2012-12-20 14:52:35 +11:00
Pat Hickey 91b94c0f6c Arduino.mk: fixed per-target toolchains 2012-12-20 14:52:35 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00