Commit Graph

53 Commits

Author SHA1 Message Date
Andrew Tridgell 4939f30ec4 AP_HAL: make linux internal i2c be 0xffff
based on feedback from Lucas
2018-07-10 15:39:47 +10:00
Andrew Tridgell b19219d636 HAL_Linux: allow for 16 I2C buses on Linux 2018-07-10 15:39:47 +10:00
Andrew Tridgell 281a1b6569 AP_HAL: added I2C bus mask functions and macros 2018-07-10 15:39:47 +10:00
Lucas De Marchi 49d08ba72a Global: remove minlure
Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.

It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
2018-06-26 07:32:08 -07:00
Peter Barker f5eb281efd AP_HAL: use AP_RTC
Also add a define as to whether set_time / get_time can be used
2018-06-15 08:01:22 +10:00
Eugene Shamaev c410feefa1 AP_HAL: add CAN bus declaration for the intel aero board 2018-05-25 13:53:17 +10:00
Lucas De Marchi a56106cccb AP_HAL: use buildsystem for default directories 2018-05-24 08:00:33 -07:00
Lucas De Marchi 1e7ad72909 AP_HAL: use default storage for more boards
Boards from Emlid, Erle Robotics and BBB-like ones were agreed to be
changed #7100. Here I'm also change some more, just because they appear
to be using the old default just because of copy and paste. We can
always revert back if we get complains and it seems something trivial.
Almost all boards now are using the the default path for logs, terrain
and params, except those that have restrictions to do so, like ones
using custom distros.
2018-05-24 08:00:33 -07:00
Francisco Ferreira 695d92ddbf AP_HAL: remove Qualcomm board support 2018-05-17 09:57:20 +10:00
mirkix 76802740cb AP_HAL: fix PocketPilot HMC5843 I2C bus number 2018-05-12 07:16:50 +10:00
mirkix dfd2fb1841 AP_HAL: move BUZZER_PIN into AP_HAL 2018-05-10 17:48:25 +01:00
mirkix 8c36635a8c AP_HAL: LED GPIOs for final PocketPilot design 2018-05-09 16:16:42 -07:00
Lucas De Marchi b54b95de12 AP_HAL: minlure: search for specific I2C controller
The number can change from one kernel version to another and even from
one boot to another. Find the I2C controller on sysfs and stick to that,
like it's done for PCA9685.
2018-05-04 11:47:04 -07:00
Lucas De Marchi 4f2498947b AP_HAL_Linux: remove redundant ifdef
CONFIG_HAL_BOARD_SUBTYPE should be set in the boards header.
2018-05-04 11:42:55 -07:00
mirkix ee86418587 AP_HAL: change PocketPilot to final baro sensor 2018-05-04 08:00:49 +10:00
Alexey Bulatov 4d08ec8c85 AP_HAL: Edge: set storage directory to /edge/ardupilot 2018-04-04 09:29:16 +09:00
Tom Pittenger a2f1f63ab3 AP_HAL: add param defaults for EMLID_EDGE for GPS_TYPE=9 and CAN_DRIVER=1 2018-02-13 15:29:53 +11:00
Alexey Bulatov 8369f125ce AP_HAL: Edge: add define HAL_WITH_UAVCAN 2018-02-13 13:52:44 +11:00
mirkix 3aa211b325 AP_HAL: fix BeagleBone Blue external I2C number 2018-02-12 09:49:56 +09:00
Igor Anokhin 5cf15db966 AP_HAL: add LSM9DS1 defines
Add defines for name and number sensor
2018-02-06 09:31:26 -08:00
Nikita Tomilov a50e6c6dd7 AP_HAL: board: linux: Add default CAN interface name 2018-01-17 07:24:17 -08:00
mirkix 0e7ade6f0c AP_HAL: add new board PocketPilot 2017-12-27 16:01:55 +00:00
HeBin 895b5f34b8 AP_HAL: add Robsense PhenixPro Devkit Board support 2017-11-22 10:10:21 -08:00
Georgii Staroselskii 6326e23682 AP_HAL: Navio: add defs for BoardLED 2017-11-17 09:20:55 -08:00
alexshirley 065b00eb81 AP_HAL: Remove SBUS macro from ocpoc target 2017-11-01 10:28:40 -07:00
Lucas De Marchi 7fd10921c3 AP_HAL: Linux: add define for storage dir
This mantains compatibility with what the boards were already using,
except for Aero and Minlure in which I'm changing it already as this is
desired.
2017-10-30 16:57:37 -07:00
Lucas De Marchi 591b846e2d AP_HAL: switch aero and minlure to new log/terrain directory
Additionally make Edge use the default.
2017-10-30 16:57:37 -07:00
Lucas De Marchi d2ba8409d0 AP_HAL: provide default directory for Linux boards
/var/lib/<project> is more in line to where projects save their data.
Also, remove APM from dir name as it should had been done some time
ago.

This is only the default (and recommended for any new board). Existing
boards that want to adopt the default can remove their defines.
2017-10-30 16:57:37 -07:00
Georgii Staroselskii 4e2028c32f AP_HAL: Edge: enable Heat PWM 2017-10-20 13:03:08 -07:00
Georgii Staroselskii db9f427617 AP_HAL: Edge: add compass settings
Use HMC5883L as default before UAVCAN Linux support is in place
2017-10-20 13:03:08 -07:00
Georgii Staroselskii 2dd68243a2 AP_HAL: add Edge support 2017-10-20 13:03:08 -07:00
Lucas De Marchi 58ae139b8f AP_HAL: add possible external compasses for aero 2017-09-27 09:25:34 -07:00
Lucas De Marchi 68b3e5ccab AP_HAL: aero: define uart RCOutput_Tap 2017-09-21 07:59:20 -07:00
Lucas De Marchi 13f4ba7392 AP_HAL: remove raspilot 2017-09-12 15:06:19 -07:00
Francisco Ferreira 51a8aa3d1f AP_HAL: remove URUS 2017-09-11 10:04:11 -07:00
davidaroyer 8862e76284 AP_HAL: add support for Aerotenna OcPoC-Zynq hardware 2017-09-08 07:30:49 -07:00
Francisco Ferreira e0f4d3dbe5
AP_HAL: remove unused HAL_AIRSPEED_MS4515DO_I2C_BUS macro 2017-08-05 03:15:53 +01:00
mirkix 478fb60a5b AP_HAL: BeagleBone Blue fix HMC5843 I2C bus number 2017-06-01 17:11:34 +01:00
Vinicius Juvinski 203073e543 AP_HAL: add LEDs for BBBMini
Use pins P8.9, P8.10 and P8.11
2017-04-19 01:33:35 -07:00
Andrew Tridgell 7cd290af9b AP_HAL: added defaults offsets max for disco 2017-04-10 19:17:37 +10:00
Lucas De Marchi 7ca9c7a443 AP_HAL: add HAL_HAVE_SAFETY_SWITCH 2017-03-24 12:06:19 +11:00
Lucas De Marchi c7fc3ffbc4 AP_HAL: add HAL_HAVE_BOARD_VOLTAGE 2017-03-24 12:06:19 +11:00
mirkix 81da61a68d AP_HAL: BBBmini remove onboard OpticalFlow 2017-03-07 22:48:48 -08:00
mirkix 093407e8e8 AP_HAL: Add BeagleBone Blue 2017-01-26 23:15:52 -08:00
Julien Beraud c31522c2c3 AP_HAL_Linux: fix focal lengths calculation
Fixed focal length on bebop due to wrong spec.
Fix comment that had a typo.
Fixed focal length calculations on other boards that were mislead
by the typo.
2017-01-23 21:23:16 +11:00
Mathieu OTHACEHE bad1c879d9 AP_HAL: Bebop & Disco: move default param file path
In future Bebop & Disco releases, no ardupilot binary nor default param file
will be provided.

So move HAL_PARAM_DEFAULTS_PATH to ardupilot folder in RW memory.
2017-01-18 18:08:01 +00:00
Mathieu OTHACEHE fdb2a9c99b AP_HAL: Bebop & Disco: rename APM to ardupilot in paths
Rename APM to ardupilot for Bebop and Disco's HAL_BOARD_LOG_DIRECTORY and
HAL_BOARD_TERRAIN_DIRECTORY.
2017-01-18 18:08:01 +00:00
mirkix 7e33ba04a9 AP_HAL: Add BBBmini PX4FLOW I2C bus number 2016-12-03 21:07:07 +11:00
Andrew Tridgell fd8955a737 AP_HAL: define default rotations for mpu6000 based boards 2016-11-09 17:08:14 +11:00
Andrew Tridgell 38a1f51b53 AP_HAL: define rotations for the MPU9250 in board/linux.h 2016-11-09 17:08:07 +11:00