Peter Barker
b6920e14c8
Copter: remove redundant SurfaceTracking enumeration namespacing
...
Also rename State to Surface to be more specific about what is being
set/tracked.
2019-10-26 08:08:22 +08:00
Michael du Breuil
b42b1c08c4
Copter: Support new AP_Vehicle::set_mode
2019-10-25 08:48:22 +08:00
Randy Mackay
7b0da89708
Copter: add vibration check
2019-10-18 11:15:25 +09:00
Leonard Hall
50a098c359
Copter: Standby functions
2019-10-17 14:57:18 +09:00
Leonard Hall
c11f2247eb
Copter: System ID mode
2019-10-16 08:17:09 +09:00
Randy Mackay
36327d56de
Copter: reject reboot request from GCS if auto esc cal on next reboot
...
this resolves an edge case in which the motors could spin up on the next reboot because the user didn't unplug the battery to reboot the flight controller
2019-10-15 07:41:44 +09:00
Andy Piper
8ce7f02167
ArduCopter: add functions to update dynamic notch frequency. Periodically log the frequency.
...
tradheli- make RPM sensor input to harmonic notch in hertz
2019-10-10 20:26:02 +09:00
Peter Barker
9e5d5c023c
Copter: move many members up to base class
2019-10-08 11:26:04 +11:00
Peter Barker
95f81297d9
Copter: become an AP_Vehicle
2019-10-08 11:26:04 +11:00
murata
abb91fc33a
Copter: Change external button specification to option
...
Copter: Change the definition name from BUTTON to BUTTON_ENABLED.
2019-10-08 08:09:19 +09:00
Randy Mackay
1c4f47f882
Copter: add upward facing surface tracking
2019-09-28 11:13:14 +09:00
Randy Mackay
d5d7fbe761
Copter: rangefinder glitch detection moved to read_rangefinder
2019-09-28 11:13:14 +09:00
Randy Mackay
808efa4c79
Copter: surface tracking format fixes
2019-09-28 11:13:14 +09:00
Peter Barker
b4537bebd8
Copter: move control_mode_t into being Mode::Number enum class
...
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
2019-09-13 13:12:08 +09:00
Randy Mackay
709c874d8b
Copter: integrate AP_OAPathPlanner
2019-08-17 09:42:43 +09:00
Peter Barker
4fa83ed40d
Copter: move automatic declination setting into AP_Compass itself
2019-08-13 10:02:13 +10:00
Peter Barker
c0e8d319c6
Copter: make surface tracking adjust_climb_rate take a float
...
Its callers all pass in floats and we return a float, so stop going via
an int16_t
2019-08-06 14:09:09 +09:00
Peter Barker
b0428f0fe8
Copter: make surface_tracking a class, various functions methods
2019-08-06 14:09:09 +09:00
Peter Barker
97bb846310
Copter: RangeFinder uses AP_SerialManager singleton
2019-07-16 09:29:48 +10:00
Peter Barker
9412075b9c
Copter: avoidance no longer takes ahrs in constructor
2019-07-16 09:29:48 +10:00
Peter Barker
e977fce3ad
Copter: stop passing relay and ahrs into camera constructor
2019-07-09 09:32:39 +10:00
Peter Barker
05925b57ad
Copter: mark position_ok methods as const
2019-07-09 09:26:45 +10:00
Peter Barker
eb82126758
Copter: ServoRelayEvents uses Relay singleton
2019-07-03 23:59:24 -07:00
Peter Barker
cf45108efb
Copter: set Heli frame default at compile-time
2019-07-04 10:05:01 +09:00
Peter Barker
bb3d2a0b37
Copter: pass GCS_MAVLink object rather than channel number in motortest
2019-07-02 10:04:56 +10:00
Peter Barker
f3c1791341
Copter: stop passing gcs chan into method which wants an object
2019-06-25 09:45:54 +10:00
Michael du Breuil
df37a3d603
Copter: Remove wrapper around MAVLink send heartbeat
2019-06-18 13:59:52 +01:00
Peter Barker
676d75c391
Copter: correct namespacing of Copter modes
...
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker
9f6b48b743
Copter: remove unneeded initialisation
2019-06-03 16:48:38 +09:00
Peter Barker
6dce39cbe1
Copter: use AP_Arming methods to arm and disarm vehicle
...
Really just changing the namespace of init_arm_motors
2019-05-30 07:37:30 +09:00
Peter Barker
3ef84d2b96
Copter: stop passing references to AC_Avoid constructor
2019-05-22 07:48:02 -06:00
Randy Mackay
01909cf4c8
Copter: zigzag mode gets terrain following support
2019-04-19 07:45:52 +09:00
Randy Mackay
89eb876faf
Copter: move surface tracking variables into structure
2019-04-19 07:45:52 +09:00
Randy Mackay
33a57361bd
Copter: reduce args passed to get_surface_tracking_climb_rate
...
The same arguments are always passed in
2019-04-19 07:45:52 +09:00
Pierre Kancir
4f29d2e5a6
Copter: factorize esc calibration setup
2019-04-09 08:44:46 +09:00
Randy Mackay
a5bdd12bfa
Copter: replace TUNE_LOW/HIGH params with TUNE_MIN/MAX
...
change from uint16 to floats to ease setup
also add check that no function assigned to rc6
2019-04-08 15:24:00 +09:00
bnsgeyer
d949c80d54
Copter: tradheli replaces rotor_runup_complete with spool state
2019-04-08 09:42:21 +09:00
Michael du Breuil
d1246f5868
Copter: Fix RangeFinder init
2019-04-06 09:15:22 +11:00
Michael du Breuil
0e8c3dc485
Copter: include FWversion
2019-04-05 20:12:53 +11:00
Peter Barker
2040580ce7
Copter: move enabled parameter into compass library
2019-04-02 10:24:49 +11:00
Tom Pittenger
7824b64ad6
Copter: rename dataflash to logger
2019-03-28 16:40:57 +11:00
Peter Barker
8441542a52
Copter: remove climb_rate cache of inertial_nav.get_velocity_z
...
There were only two users of it and dozens of places using
get_velocity_z
2019-03-28 12:10:31 +11:00
Peter Barker
c7e21d95ef
Copter: move Log_Write_Error into library
2019-03-27 12:36:40 +11:00
Peter Barker
34d9ce27af
Copter: make get_pilot_desired_throttle a method on Mode
2019-03-26 20:57:15 +11:00
Patrick José Pereira
33764d6c3b
Copter: Fix typo
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-03-26 15:39:23 +11:00
bnsgeyer
2fc942ac24
Copter: tradheli-convert swash parameters on firmware upgrade
2019-03-20 10:40:20 +10:00
Peter Barker
451f5f17ce
Copter: move devo telemetry handling to GCS
2019-03-19 14:39:14 +11:00
Peter Barker
e22b29bce4
Copter: FrSky support has moved to GCS
2019-03-19 14:39:14 +11:00
Peter Barker
85d9dd6f64
Copter: move sending of RPM message up
2019-03-16 10:33:01 +09:00
Peter Barker
f189860162
Copter: use enum class for ArmingMethod and ArmingRequired
2019-03-12 19:48:14 +11:00
Peter Barker
4f69eefd4a
Copter: remove unused includes
2019-03-05 13:19:29 +09:00
Michael du Breuil
cac4b91671
Copter: Allow scripting to run
2019-03-05 08:45:54 +11:00
IamPete1
ba3d1bc6c7
Copter: move E-stop state to SRV_Channel
2019-02-27 08:51:24 +09:00
Peter Barker
a48f461158
Copter: remove position-vector methods
...
Both were used in just one place
2019-02-26 14:09:21 +11:00
Peter Barker
4187243e5c
Copter: Rally no longer takes ahrs in constructor
2019-02-20 18:03:38 +11:00
Peter Barker
5ff80e06d1
Copter: move update_sensor_status_flags into GCS subclasses
2019-02-19 14:09:59 +11:00
Peter Barker
f759c7ac7e
Copter: GCS_MAVLink takes care of mavlink capabilities
2019-02-19 13:14:52 +11:00
Peter Barker
9bc23d3f28
Copter: move try_send_message of nav_controller_output up
2019-02-19 10:08:00 +11:00
Peter Barker
f64ad2f433
Copter: move visual odometry update function into AP_VisualOdom
2019-02-16 15:13:59 +11:00
Peter Barker
31f796f0c5
Copter: remove unused scaleLongDown member
2019-02-15 11:45:13 +09:00
Peter Barker
5ae52038fa
Copter: make setting of home boolean in preparation for sanity checks
2019-02-15 08:28:45 +11:00
Peter Barker
8de7f4a520
Copter: devo telemetry no long requires singleton classes to be passed in
2019-02-13 19:24:07 +00:00
Peter Barker
a0189d6060
Copter: AP_Frsky_Telem uses singletons
2019-02-12 17:53:23 +00:00
Peter Barker
587e02e92e
Copter: remove pv_ functions that duplicate Location functions
2019-02-06 11:02:50 +09:00
Peter Barker
7197cf9e5c
Copter: move sending of sys_status message up
2019-02-05 11:07:39 +11:00
Peter Barker
3521d98b52
Copter: move handling Write_Event into AP_Logger
2019-02-04 09:30:07 +09:00
Peter Barker
1412921561
Copter: move sending of fence_status message up
2019-01-31 13:44:29 +09:00
Peter Barker
5dc743f1ba
Copter: fence no longer takes reference to ahrs in constructor
2019-01-31 11:25:38 +09:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
845f015648
Copter: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Randy Mackay
50c5ad7076
Copter: TradHelis force spool up before takeoff
2019-01-15 11:41:44 +09:00
Peter Barker
f50418f72a
Copter: Terrain uses rally singleton
2019-01-09 10:14:16 +11:00
Michael du Breuil
ec8a82e8a0
Copter: Remove unneeded AP_Buffer include
2018-12-31 11:41:43 +09:00
Andrew Tridgell
89d54767b1
Copter: convert to use AC_AutoTune library
...
this maintains existing behaviour
2018-12-18 10:34:42 +09:00
Francisco Ferreira
a2fa63bcf7
Copter: fix Cygwin build
...
Static initialization doesn't have an exact order, we can't rely on it
2018-12-13 09:28:44 +09:00
Peter Barker
75fb9780f7
Copter: rename send_extended_status1 to send_sys_status
2018-12-10 12:52:41 +09:00
murata
b252eae404
Copter: Flip mode is an option.
...
Copter: Flip mode is an option.
2018-11-26 09:29:47 +09:00
Peter Barker
d49431488e
Copter: remove pointless wrappers around RC_Channels functions
2018-11-23 10:56:17 +11:00
Peter Barker
ee5339f931
Copter: remove pointless wrappers around gcs functions
2018-11-23 10:56:17 +11:00
Peter Barker
33ca577653
Copter: OpticalFlow takes care of its own logging
2018-11-13 10:40:23 +11:00
Peter Barker
ee456e8870
Copter: do not pass ahrs to opticalflow constructor
2018-11-13 10:40:23 +11:00
Andrew Tridgell
2f79932611
Copter: auto-convert landing gear PWM parameters
2018-11-10 21:24:19 +11:00
Peter Barker
73940df48e
Copter: move mission into mode_auto
2018-11-09 13:35:40 +09:00
Peter Barker
bf1c82ffe1
Copter: don't pass ahrs to terrain constructor
2018-11-08 20:59:45 +11:00
Peter Barker
f598cff99c
Copter: stop passing ahrs to Mission constructor
2018-11-08 10:01:16 +09:00
Peter Barker
1d322046b0
Copter: tidy up send_pid_tuning
2018-11-06 08:19:15 +09:00
Peter Barker
859f4828a1
Copter: move handling of gimbal messages up
...
Copter: move handling of mav_cmd_do_mount_control up
Copter: move handling of deprecated mount messages up
Copter: move handling of command_do_set_roi up
Copter: move handling of command_do_set_roi up
Copter: mount no longer takes ahrs in constructor
2018-10-30 17:19:14 +11:00
Leonard Hall
54a59f581f
Copter: add motor thrust lost check
2018-10-16 00:44:50 +09:00
Peter Barker
26ca75efae
Copter: make libraries get EKF control limits themselves
2018-10-09 10:47:38 +11:00
CAO MUQING
71beab7502
Copter: create and update Zigzag flight mode
2018-10-05 10:05:45 +09:00
Peter Barker
a30cdf6806
Copter: eliminate failsafe.rc_override_active
...
Use RC_Channels::has_active_overrides() instead
2018-09-05 11:54:32 +10:00
Peter Barker
ec6c59faa3
Copter: move handling of disable-gcs-rc-overrides-channel-option up
2018-09-05 11:54:32 +10:00
SergeyBokhantsev
af6303c82b
Copter: User parameters implementation
2018-08-31 08:42:03 +09:00
Randy Mackay
920300899e
Copter: rename gcs_check_input to gcs_update
...
this makes the names consistent with Rover and Plane
2018-08-24 15:30:50 +09:00
Peter Barker
09d8a33aaf
Copter: stop passing ahrs to PrecLand constructor
2018-08-17 21:14:57 +09:00
Alexander Malishev
f5c540a127
Copter: publish navigation info to OSD
2018-08-16 10:26:34 +10:00
Randy Mackay
346e9e36db
Copter: remove compass accumulate
2018-08-06 11:05:34 +10:00
Peter Barker
e7e56dde7a
Copter: move handling of RC switches into RC_Channel
2018-08-01 12:11:30 +09:00
Peter Barker
22f7f29045
Copter: move all of waypoint-takeoff into Mode namespace
2018-07-27 13:08:27 +10:00
SergeyBokhantsev
ea3de59107
Copter: implement user auxswitch functions
2018-07-26 20:27:49 +09:00
Peter Barker
f06637d48e
Copter: update servorelayevents @50Hz rather than 3Hz
...
One of the functions we allow for is toggling the servo at a set
frequency. 3Hz - the old rate - doesn't allow for precise triggering of
the servo. This patch increases that rate to 50Hz - somewhat better.
2018-07-20 09:42:58 +09:00
Michael du Breuil
3755b2ac0f
Copter: Remove unused ADC include
2018-07-17 09:29:50 +10:00
Peter Barker
c2f9b857a4
Copter: remove unused baro_climbrate variable
2018-07-04 21:08:47 +01:00
Peter Barker
df83cb034e
Copter: use ArmingMethod enumeration
2018-07-03 15:16:38 +10:00
Peter Barker
a1f29e92d1
Copter: use singletons in AP_Arming
2018-07-03 13:44:11 +10:00
Andrew Tridgell
20dea6df45
Copter: moved OSD to top level params
...
this gives us plenty of param depth for a complex param tree
2018-06-27 14:55:00 +10:00
Alexander Malishev
f63b3c044a
Copter: added OSD support
2018-06-27 14:55:00 +10:00
Peter Barker
7883582c65
Copter: move takeoff state into Mode class
2018-06-26 09:11:21 +09:00
Peter Barker
cff1969a29
Copter: make do_user_takeoff a member of Mode
2018-06-26 09:11:21 +09:00
Peter Barker
cb26ff64b3
Copter: current_mode_has_user_takeoff -> Mode::has_user_takeoff
2018-06-26 09:11:21 +09:00
Peter Barker
70d159cb38
Copter: raise EKF failure even if USB is connected
...
This will let EKF go bad if your PixHawk is connected to your laptop.
This doesn't seem to be a problem for the other vehicles.
This also allows the EKF to go bad in-flight if you happen to have
connected (against AP's recommendations) your companion computer to your
flight controller via USB. Since people do this, it is better to have
the checks than not.
2018-06-26 10:07:55 +10:00
Peter Barker
fd9ce90b8e
Copter: option to force arm, bypassing checks
2018-06-20 11:43:38 +10:00
murata
a970eacf49
Copter: Do not use the Delay method wrapper.
2018-06-16 09:40:47 +09:00
Peter Barker
078d90132c
Copter: use AP_RTC
...
Co-authored-by: patrickelectric@gmail.com
Copter: AP_GPS now sets the system time directly
Copter: use AP_RTC for mission delays
Copter: Remove ap_t bits counter (Patrick José Pereira)
Change bits in ap_t to bool and add a static assert
2018-06-15 08:01:22 +10:00
Peter Barker
ab68e4fe8b
Copter: log quiet-nan for rangefinder-desired-alt when not using it
2018-06-06 08:33:56 +09:00
Peter Barker
e3ddf7dadd
Copter: rename SPRAYER-enabled-define to SPRAYER_ENABLED
2018-06-01 15:13:05 +09:00
Peter Barker
5f2221fe74
Copter: move handling of VFR_HUD into GCS_MAVLink_Copter
2018-05-29 13:00:40 +10:00
Andrew Tridgell
2425c65e74
Copter: implement 'air-mode' for copter
...
this implements what betaflight calls 'air-mode'. This gives attitude
control when throttle is at zero, allowing for zero-throttle maneuvers,
plus keeping the copter level on the ground.
This was already implemented if an interlock switch was setup, but it
should also work with an arming switch. If using an arming switch then
throttle should not be considered zero as long as the arming switch
hasn't gone low.
2018-05-29 10:27:14 +09:00
Andrew Tridgell
0d56526400
Copter: added de-bouncing of aux switches
...
this prevents a crash with a switch such as arm/disarm getting a
single frame RC glitch
2018-05-29 08:26:46 +09:00
Peter Barker
81e9edd80a
Copter: move sending of sim state up
2018-05-23 18:36:50 +10:00
Peter Barker
33582107b6
Copter: move sending of GLOBAL_POSITION_INT up to GCS_MAVLINK
2018-05-17 15:48:06 +01:00
Peter Barker
da1b2579c4
Copter: move send_attitude up to GCS_MAVLINK
2018-05-17 18:28:43 +10:00
Peter Barker
9dce133938
Copter: handle setting of ekf origin in GCS_MAVLink
2018-05-17 10:13:42 +10:00
Peter Barker
0dc0e54767
Copter: move Log_Write_Home_And_Origin into AP_AHRS
2018-05-17 10:13:42 +10:00
Leonard Hall
656892cd88
Copter: ekf failsafe disabled for acro and stabilize
...
Also restructure to combine ekf_over_threshold and ekf_check_position_problem
2018-05-10 08:59:37 +09:00
Peter Barker
dee40f3fe5
Copter: make scheduler track whether it has called the delay callback
2018-05-09 16:15:38 +10:00
Peter Barker
6dd9f50f7c
Copter: move try_send_message handling of RC_CHANNELS up
2018-05-08 12:33:32 +01:00
night-ghost
51a189e906
ArduCopter: devo telemetry support (RX705/707)
2018-04-24 10:44:28 +10:00
Peter Barker
ba8b3e2415
Copter: create an AutoYaw helper object to hold auto-yaw state
2018-04-18 13:27:43 +09:00
Pierre Kancir
70805d61f2
ArduCopter: remove inertial_nav from precland constructor
2018-04-17 17:21:35 +09:00
Peter Barker
80549a479e
Copter: move throw logging into ModeThrow
2018-04-17 17:16:52 +09:00
Peter Barker
c95ff96263
Copter: Baro does its own dataflash logging
2018-04-12 19:12:12 +01:00
Peter Barker
d9ab8d6569
Copter: sprayer now uses ahrs singleton; stop passing reference
2018-04-12 14:23:33 +09:00
Pierre Kancir
9e298b3b2f
Copter: sprayer uses ahrs in constructor
2018-04-11 09:41:33 +09:00
Randy Mackay
59e4749fd0
Copter: integrate AC_Loiter
...
includes param conversion
2018-04-04 10:45:10 +09:00
Peter Barker
0c8110ecb2
Copter: factor vehicle's mavlink send_heartbeat
2018-04-03 13:05:19 +01:00
Peter Barker
d58e2214d2
Copter: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Peter Barker
cca4d5136e
Copter: move common calibration functions up
2018-04-02 23:25:05 +01:00
Dr.-Ing. Amilcar do Carmo Lucas
d633ba8c46
Copter: Add option to disable RPM module
2018-03-30 09:36:48 +09:00
Ebin
1ff4019ddf
ArduCopter: moved landing control fns from Copter to Mode
...
land_run_horizontal_control(),land_run_vertical_control(),get_alt_above_ground() moved to Mode
2018-03-29 16:50:00 +01:00
Michael du Breuil
291531e056
Copter: Support new battery failsafes
2018-03-27 22:12:21 +01:00
priseborough
4b00f399b4
Copter: Clarify definition for gps_glitching flag
2018-03-27 20:28:55 +09:00
Peter Barker
45f2312bfe
Copter: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
2749ee9060
Copter: use ins singleton
2018-03-16 00:37:35 -07:00
Randy Mackay
4a74b1b5e5
Copter: replace NTUN with PSC logging
2018-03-16 13:50:57 +09:00
Leonard Hall
9544b1763b
Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc
2018-03-16 13:50:57 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
ed36ec3c29
Copter: add option to disable THROW mode
2018-03-15 07:38:14 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
b27c00dc5f
Copter: add option to disable ACRO mode
2018-03-15 07:38:14 +09:00
Randy Mackay
af207caa1f
Copter: move get_pilot_desired_lean_angles higher in cpp
...
this makes the definition in the .h and implementation in .cpp files appear in the same order
2018-03-14 09:33:39 +09:00
Ebin
20995b909f
Copter: Moved get_pilot_desired_lean_angles to mode.cpp
2018-03-14 09:33:39 +09:00
Peter Barker
d88bd52a53
Copter: use baro singleton
2018-03-08 21:20:05 -08:00
Peter Barker
bc4f021516
Copter: use AP::ahrs() for ADSB
2018-03-07 12:34:39 +00:00
Peter Barker
af56826107
Copter: follow mode fixups
...
add follow to FLTMODEx param descriptions
remove follow's set_velocity method
10hz logging of desired velocity in follow mode
follow mode uses pos error P gain
add send-debug-via-mavlink option
don't enter follow if follow lib is disabled
follow debug slowed to 1hz
disable follow on min-features builds
2018-03-05 15:08:08 +09:00
Randy Mackay
6ee101ca98
Copter: rename chase to follow
2018-03-05 15:08:08 +09:00
Randy Mackay
053983eb70
Copter: integrate AP_Follow into chase mode
2018-03-05 15:08:08 +09:00
Peter Barker
199455dc56
Copter: add chase mode
2018-03-05 15:08:08 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
bc86ca0e3c
Copter: simplify Log_Write_Proximity
2018-03-03 17:13:34 +00:00
Dr.-Ing. Amilcar Do Carmo Lucas
bbd1aa1cab
Copter: Improve interoperation of AC_AVOID_ENABLED and BEACON_ENABLED
2018-03-03 17:10:26 +00:00
Peter Barker
b8e1f03599
Copter: add define for disabling beacon
2018-02-27 07:43:13 +09:00
Peter Barker
5b355214fd
Copter: add option to disable CIRCLE flight mode
...
Saves about 2.4kB of flash
2018-02-27 07:43:13 +09:00
Peter Barker
e4898e1d60
Copter: add option to disable GUIDED_NOGPS flight mode
...
Saves about 6.3kB of flash
2018-02-27 07:43:13 +09:00
Peter Barker
86b162e32f
Copter: add option to disable BRAKE flight mode
2018-02-27 07:43:13 +09:00
Peter Barker
a7fe242e31
Copter: add option to disable RTL flight mode
2018-02-27 07:43:13 +09:00
Peter Barker
b8c432b1a1
Copter: add option to disable GUIDED flight mode
...
Saves about 6kB of flash
2018-02-27 07:43:13 +09:00
Peter Barker
0ddeb56a05
Copter: add option to disable DRIFT flight mode
...
Saves about 1kB of space
2018-02-27 07:43:13 +09:00
Peter Barker
e5056f8d40
Copter: add option to disable SPORT flight mode
...
Saves about 1,500 bytes
2018-02-27 07:43:13 +09:00
Peter Barker
7154f4dea4
Copter: add option to disable LOITER mode
2018-02-27 07:43:13 +09:00
Peter Barker
9b440d6b25
Copter: add option to disable SmartRTL mode
...
Saves 5.5k of Flash
2018-02-27 07:43:13 +09:00
Peter Barker
3a61b86e65
Copter: add option to disable POSHOLD mode
...
Saves about 4k of Flash
2018-02-27 07:43:13 +09:00
Peter Barker
b9ad2bc8db
Copter: add option to disable AUTO mode
...
Saves ~12k of flash
2018-02-27 07:43:13 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
b24e5c3991
Copter: Obey MOUNT == DISABLED
2018-02-22 20:58:51 +10:00
Peter Barker
846506230d
Copter: remove pointless initialisations
...
Also reduce storage size of gps primary
2018-02-22 17:51:35 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
def098bd8a
Copter: obey ADSB_ENABLED == DISABLED
2018-02-21 22:11:34 +09:00
Randy Mackay
f0534a35d1
Copter: format change for includes
...
non-functional change
2018-02-21 21:56:01 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
137de0fea5
Copter: conditionaly include more header files
...
this should help catch missing macros
2018-02-21 21:55:59 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
002494c048
Copter: Obey CAMERA == DISABLED
2018-02-21 17:03:28 +10:00
Peter Barker
730adc3f7c
Copter: eliminate perf_update scheduler table shim
2018-02-13 17:15:05 +11:00
Peter Barker
bfc373aeff
Copter: move logging of PM messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
80a3d63264
Copter: use AP_Scheduler's loop() function
2018-02-13 17:15:05 +11:00
Peter Barker
7f69c5d26d
Copter: use scheduler ticks in place of mainloop_count
2018-02-13 17:15:05 +11:00
Andrew Tridgell
7938bd08bb
Copter: make flowhold mode conditional
...
reduces build size on px4-v2 by 4k
2018-02-12 13:34:47 +09:00
murata
c31c2a4cf1
Copter: optionalize the winch
2018-02-12 12:16:57 +09:00
Peter Barker
40d74584ac
Copter: remove shims used in scheduler
2018-02-12 11:19:34 +09:00
Andrew Tridgell
0ed75052f8
Copter: enable parameters inside mode objects
...
this adds FHLD_* parameters for FlowHold mode. It is a large patch as
it needs to disentagle the mode class to enable it to be used in
Parameters.h
2018-02-08 17:36:33 +11:00
Andrew Tridgell
af4f0c29ba
Copter: enable TMODE (ToyMode) support
...
this is for the skyviper button based transmitter control
2018-02-08 17:36:33 +11:00
Andrew Tridgell
f442b91ea5
Copter: added FLOWHOLD flight mode
...
This flight mode allows for position hold with optical flow without
needing a rangefinder for height. It can estimate its height from the
flow data and IMU
2018-02-08 17:36:33 +11:00
Andrew Tridgell
15166eff2e
Copter: enable temperature calibration library
2018-02-08 17:36:33 +11:00
Michael du Breuil
69da4041ac
Copter: Move logging battery logging code to AP_BattMonitor
2018-02-06 00:11:32 +00:00
Pierre Kancir
10e6fe43dd
Copter: Add a switch option to enable/disable RC_Override
2018-01-24 21:37:41 +09:00
Randy Mackay
6546ccbb3f
Copter: velocity pi moved to position control library
2018-01-23 12:00:43 +09:00
Dylan Herman
20fe5bb98f
Copter: add SmartRTL failsafe action
...
Adds SmartRTL or RTL and SmartRTL or Land failsafe options for batt, throttle, and GCS failsafes
2018-01-22 10:54:28 +09:00
Peter Barker
dda38d65eb
Copter: AP_AHRS no longer requires GPS in constructor
2017-12-27 00:58:02 +00:00
Randy Mackay
2c0df87585
Copter: Copter.h method reordering
2017-12-15 08:26:45 +09:00
Peter Barker
6c82f7671d
Copter: move all commands logic into AUTO flightmode
2017-12-14 14:08:01 +09:00
Andrew Tridgell
8ab0ac8a16
Copter: removed create() method for objects
...
See discussion here:
https://github.com/ArduPilot/ardupilot/issues/7331
we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach
Thanks to assistance from Lucas, Peter and Francisco
2017-12-14 08:12:28 +11:00
Peter Barker
377466ddda
Copter: fence no longer requires AP_InertialNav
2017-12-13 10:04:50 +09:00
Randy Mackay
2d23e1f7c7
Copter: rename flightmode_ objects to mode_
2017-12-12 10:39:26 +09:00
Randy Mackay
c3fbf2671c
Copter: rename control_xx.cpp files to mode_xx.cpp
2017-12-12 10:39:26 +09:00
Randy Mackay
06fbe8f3a7
Copter: rename FlightMode class to Mode
...
also remove unused print_FlightMode method
2017-12-12 10:39:26 +09:00
Randy Mackay
0ac708b5a0
Copter: remove ability to disable PosHold flight mode
...
This flight mode is stable and regularly used so it is unlikely that we ever want to disable it
2017-12-12 10:39:26 +09:00