Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
51,586 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

569 Commits

Author SHA1 Message Date
Randy Mackay 4c8ada111b Plane: quadplane defaults Q_WP_SPEED to 500 
Q_WP_ACCEL default is set to 100
 2021-03-03 08:03:39 +09:00
Iampete1 1d050a01ce Plane: Quadplane: add Q_OPTION to ignore forward flight angle limits in Q modes 2021-03-02 11:16:35 +11:00
Iampete1 8ebe64a274 Plane: Quadplane disable forward motor assist in Q modes if rangefinder is out of range low 2021-02-28 18:48:56 +11:00
Andrew Tridgell 44df1dd0ca Plane: fixed the pitch control in transition for tilt rotors 
this fixes an issue found by Henry. If level transition is set when
transitioning to FBWA from a Q mode, and the pilot pulls back on the
pitch stick to demand pitch up then the plane would go into a
high-alpha flight state with low vertical throttle so it would not
climb, resulting in it never getting past airspeed wait state
 2021-02-28 11:33:18 +11:00
Andrew Tridgell 319368e4b7 Plane: fixed yaw on fwd transition in tilt quadplanes 
this fixes the coordinated turn calculation for yaw rate in tilt
quadplanes, and also only applies it if demanding at least 10 degrees
roll.

this fixes an issue when the pilot has a small roll demand in FBWA
from slightly off roll RC trim

thanks to Henry for helping diagnose this!
 2021-02-27 14:42:20 +11:00
Mark Whitehorn 236961f17f Plane: use get_frame_class/type string methods 
use AP_Enum<> for frame_class/type
remove invalid copterTS check
improve quadplane setup failure message

Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
 2021-02-09 12:43:53 +11:00
Patrick José Pereira cdc7f891a9 ArduPlane: Add missing const in member functions 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-03 18:45:14 +11:00
Iampete1 004f873dc7 Plane: update Quadplane FRAME_CLASS description 2021-01-26 11:07:36 +09:00
Randy Mackay 0d0ff63242 Plane: ensure wp_nav::wp_and_spline_init is called at least once 2021-01-20 18:22:44 +11:00
Iampete1 e4fbe64616 Plane: add QuadPlane singleton 2021-01-19 11:18:10 +11:00
Peter Hall 05fb14e5d9 Plane: tailsitter start transition from initial pitch 2021-01-19 10:46:58 +11:00
Iampete1 4dec597372 Plane: move quadplane logging to QuadPlane: update() 2021-01-19 10:24:05 +11:00
Pierre Kancir 742cfc543f Plane: fix parameter unit 2021-01-12 10:21:55 +11:00
Josh Henderson cc1e395854 ArduPlane: privatize AHRS logging 2021-01-12 10:13:22 +11:00
Peter Barker 6baaf03c8c Plane: move auto_throttle_mode to being a method on each mode 2021-01-10 16:04:30 +11:00
Andrew Tridgell a0fcef6ceb Plane: added tilt vectoring in fixed wing modes 
this allows for vectoring for roll and pitch in fixed wing modes on
tilt-vectored quadplanes
 2021-01-05 08:23:28 +11:00
Iampete1 54ee2c35fb Plane: rename tailsitter scailing max param to match min and update descriptions 2020-12-22 11:00:59 +11:00
Iampete1 c8b3c91ae5 Plane: Tailsitter add disk theory and altitude gain scailing 2020-12-22 11:00:59 +11:00
Mark Whitehorn dd7a860f23 Plane: always instantiate AC_AttitudeControl_TS 2020-12-21 12:56:24 +11:00
Mark Whitehorn 24508f08dc Plane: don't relax pitch attitude controller for vectored tailsitters in throttle_wait 
add is_vectored_tailsitter()
instantiate AC_AttitudeControl_TS for tailsitters
 2020-12-21 12:56:24 +11:00
Andrew Tridgell 8e3c6124eb Plane: added support for rear motor tilt 
needed for X8 tilt tri test aircraft for this PR
 2020-12-21 12:05:50 +11:00
Andrew Tridgell e94cf561d0 Plane: use rull euler control for fwd transition of tilt vectored planes 
this gives strong yaw control and wind handling for tilt vectored
planes in forward transitions. It relaxes the yaw if the user either
demands yaw with stick input or plane navigation is demanding a roll
angle for a turn

When navigation is demanded we setup yaw rate for a coordinated turn
 2020-12-21 12:05:50 +11:00
Andrew Tridgell abd5f8351d Plane: don't reset yaw target in TRANSITION_TIMER for tilt-vectored quadplanes 2020-12-21 12:05:50 +11:00
Andrew Tridgell ad14e153e8 Plane: fixed tilt vectoring to cope with large tilt angles 
This uses vectoring for both roll and yaw when tilted, and uses
differential thrust for yaw when tilted
 2020-12-16 08:45:11 +11:00
Hwurzburg 8658023dad Plane: Add lower CHECK_SCALE defaults for QuadPlane 2020-12-07 11:49:01 +11:00
Andrew Tridgell cd6ddf7d4f Plane: fixed disable of geofence on quadplane landing 
fixes #15917
 2020-12-02 18:33:07 +11:00
Andrew Tridgell d984ddc163 Plane: apply circular limits to QLOITER pilot angles 
This uses the same logic as Copters get_pilot_desired_angle() to apply
a circular limit and the limits in Q_ANGLE_MAX and Q_LOIT_ANG_MAX to
loiter pilot angles.

Co-authored-by: Kris <kris968658@gmail.com>
 2020-12-01 11:22:49 +11:00
Iampete1 42887891be Plane: tailsitter: make sure alt target is abover current alt 2020-11-17 10:15:27 +11:00
Iampete1 c03de6bdbe Plane: log Qassist state 2020-11-17 10:15:27 +11:00
Andrew Tridgell eea62bf733 Plane: added optional ground effect compensation for quadplanes 
this allows for landings in aircraft badly effected by ground effect
to be compensated for
 2020-11-10 12:05:48 +11:00
Mark Whitehorn c054218568 Plane: report quadplane setup errors in config_error loop 2020-11-05 15:04:10 +11:00
Iampete1 5f67f8130b Plane: tailsitters use Z stopping point on transition 2020-11-04 18:34:00 +11:00
Iampete1 b225ae43ab Plane: always log tailsitter scalefactor 2020-11-03 10:38:51 +11:00
Iampete1 840f129153 Plane: remove unused tailsitter scailing option 2020-11-03 10:38:51 +11:00
Mark Whitehorn 85480c8865 Plane: update frame_type parameter description 2020-10-27 10:24:20 +11:00
Iampete1 2acbef5579 Plane: tailsitters in VTOL transition use FW rates 2020-10-13 10:07:05 +11:00
Iampete1 0201692eeb Plane: Q_OPTION to disable synthetic airspeed assist 2020-10-07 18:20:08 +11:00
Iampete1 6621b69836 Plane: log quadplane transision state 2020-09-30 18:15:42 +10:00
Iampete1 f972d3dc2f Plane: Quadplane: tailsitter only change view once transision is complete 2020-09-30 18:15:42 +10:00
Hwurzburg 8c856b3ed2 Plane: Add missing Q_OPTIONS metadata for all options 2020-09-25 13:43:59 +10:00
Andy Piper d16872cca5 Plane: compile out ADSB mode if required 2020-09-24 08:22:16 -07:00
Andrew Tridgell e9b8a20312 Plane: fixed hover learn in quadplanes for THR_MIN>0 
petrol quadplanes commonly have THR_MIN>0, and without this change
cannot ever learn the hover throttle
 2020-09-08 11:09:25 +10:00
Mark Whitehorn 629f2153e0 Plane: move arming delay logic into AP_Arming_Plane 2020-09-08 10:54:42 +10:00
Mark Whitehorn 2b4772269d Plane: tiltrotors: allow vectored yaw motor tilt when disarmed 
add disarm tilt delay
add arming delay
add Q_OPTIONS for disarmed motor tilt and delayed arming
add comment explaining arming delay option
eliminate millis() wrap in arming delay
 2020-09-08 10:54:42 +10:00
Mark Whitehorn bcdd16025b Plane: replace AP_MotorsMatrixTS with AP_MotorsMatrix 2020-09-08 10:50:31 +10:00
Iampete1 abee62abc4 Plane: use throttle in for transition max comparison 2020-08-30 18:19:40 +10:00
Mark Whitehorn ee65940dfa Plane: enable yaw in qstabilize:air_mode at zero throttle 2020-08-13 08:47:27 +10:00
Mark Whitehorn 4630e9af30 Plane: add Mode::is_vtol_man_mode 
and make use of is_vtol_mode in in_vtol_mode
 2020-08-13 08:47:27 +10:00
Mark Whitehorn e22d9398d3 Plane: add AirMode RC option for quadplanes 
add Q_OPTION for AirMode (auto-enabled if RCx_OPTION ARMDISARM assigned)
    bugfix: manual throttle mix for qacro
    qualify auto airmode on/off
    add Air Mode to Plane RC_OPTION metadata
    restrict airmode to manual throttle modes
    add qhover to manual throttle mix
    move air_mode from Plane to QuadPlane
    add Mode::is_vtol_man_throttle()
 2020-08-13 08:47:27 +10:00
Andrew Tridgell 6466912ac0 Plane: don't crosstrack after AUTO VTOL takeoff 2020-08-04 09:26:08 +10:00
Andrew Tridgell cce2532901 Plane: fixed use of VTOL control for missions 
horizontal speed was not being setup when doing waypoint missions in
VTOL mode
 2020-07-28 08:06:14 +10:00
Iampete1 08a710235d Plane: add tailsitter assist with motors only option 2020-07-09 06:49:24 +10:00
Iampete1 6710bab006 Plane: add Q_OPTIONS to defaut to Qassist force enabled 2020-07-09 06:49:24 +10:00
Mark Whitehorn d5b1b20274 Plane: implement manual forward throttle for QACRO, QSTABILIZE and QHOVER 
add parameter Q_FWD_THR_MAX for scaling manual throttle
allow forward motor tilt when disarmed
add FWD_THR_CH as an RC option
change Q_FWD_THR_MAX to percent
change RC_OPTION FWD_THR to 209
move assignment of rc_fwd_thr_ch to one_second_loop
move arming check from forward_throttle_pct to set_servos
change Q_FWD_THR_MAX TO Q_FWD_MANTHR_MAX
expand description of Q_FWD_MANTHR_MAX
add pre-arm check for VTOL manual forward throttle
change VTOL fwd throttle input to percent
 2020-07-07 08:37:46 +10:00
Peter Barker d47569ccef Plane: correct ASSIST_ANGLE description 2020-07-01 20:57:32 +10:00
Andrew Tridgell 3a0538449c Plane: added Q_ASSIST_DELAY parameter 
this allows tuning of the time between assistance thresholds being met
and assistance kicking in. It also changes the default delay from 1s
down to 0.5s based on analysis of a flight where assistance was too
slow
 2020-07-01 20:57:32 +10:00
Peter Barker 1206df6f0c ArduPlane: remove use of Vector2 as function 2020-06-16 11:00:44 +10:00
Andrew Tridgell 568e13fbb9 Plane: allow for continue after land for quadplanes 
this allows for a new takeoff after a quadplane auto landing
 2020-06-02 09:12:22 +09:00
Peter Hall 7688430029 Plane: allow Qassit for fw to vtol transision 2020-05-26 09:01:47 +10:00
Peter Hall 87cd9a4791 Plane: allow Qassist for tailsitters 2020-05-26 09:01:47 +10:00
Peter Hall 2467d7b5c7 Plane: add Qassist switch 2020-05-26 09:01:47 +10:00
Paul Riseborough 40cc5a5006 ArduPlane: Improve EKF failsafe in VTOL modes 
Replicates Copter behaviour with a three step process if the EKF sustains a loss of navigation as detected by high GPS innovation test ratios:

1) Attempts a yaw reset using the GSF estimate if available
2) Attempts a lane switch
3) Falls back to a non-position mode
 2020-05-14 10:40:48 +10:00
Randy Mackay 59a2667870 Plane: quadplane's throttle mix uses filtered accelerations 2020-05-12 09:56:09 +10:00
Michael du Breuil 9eaf7f5528 Plane: Fix VTOL yaw for STICK_MIXING 0 2020-05-08 08:44:03 +10:00
Andrew Tridgell d0a509eef1 ArduPlane: invalidate param count when changing param tree structure 2020-04-29 07:36:55 +10:00
Henry Wurzburg 3397bce235 Plane: Quadplane tailsit transition to FW throttle level change 2020-04-21 09:51:47 +10:00
Henry Wurzburg 6c730ccfec Plane: start tailsitter forward transition from current pitch angle 2020-04-21 09:50:57 +10:00
Rishabh 0c5d68dfeb Plane: Replace update_vel_controller_xy() with update_xy_controller() 2020-04-21 09:22:45 +10:00
Andrew Tridgell 156fe0846f Plane: fixed plane landing gear to obey LGR_OPTIONS bits 
we forced landing gear retract/deploy on takeoff and landing when we
should be following the options bits
 2020-04-15 17:10:31 +10:00
Michael du Breuil 37be15b3cd Plane: When stick mixing is disabled do not apply stick mixing to quadplane modes 2020-04-04 10:12:22 +11:00
Mark Whitehorn cbce94005b Plane: expand description of QTUN.Sscl log message field 2020-04-03 08:36:55 +11:00
Andrew Tridgell c6a6427d6a Plane: prevent lidar glitches from triggering land final 
this prevents short term lidar glitches from triggering the change
from descend to final in quadplane
 2020-02-27 13:15:46 +11:00
Randy Mackay f2ab428cdd Plane: rename update_throttle_mix 
was called update_throttle_thr_mix
also minor format fixes
 2020-02-25 16:52:40 +09:00
Peter Barker 74dbcac40e ArduPlane: log disarm method 2020-02-22 12:16:29 +11:00
Andrew Tridgell 7a14992cce Plane: reset TECS at end of auto VTOL takeoff 2020-02-16 17:04:07 +11:00
Andrew Tridgell 0bfab20bd0 Plane: fixed a bug in LOITER_TURNS in quadplanes 
if NAV_LOITER_TURNS is used with Q_GUIDED_MODE=1 then we would orbit
forever. This ensures we do exit the loiter
 2020-02-12 13:52:32 +11:00
Peter Hall a2e72de5ae Plane: move to airspeed_estimate with pointer 2020-01-14 22:34:37 -07:00
Gone4Dirt 760909d046 Plane: Prevent FS action overiding VTOL land 2019-12-31 11:42:59 +11:00
Mark Whitehorn 56b2c697d2 Plane: change tailsitter_input to bitmask 
update parameter metadata for Q_TAILSIT_INPUT and Q_FRAME_TYPE
 2019-12-18 08:33:29 +11:00
Mark Whitehorn c16f3a2cba Plane: simplify body-frame roll axis swapping and constrain yaw rate max 2019-12-18 08:33:29 +11:00
Mark Whitehorn 14fc6c5446 Plane: add logging for tailsitter gainscaling and clean up tailsitter body-frame roll input handling 
fix metadata for tailsitter param GSCMSK
rework roll/yaw scaling for body-frame roll options
add constraints on body-frame roll and yaw inputs
move speed_scaler logging into QTUN message
 2019-12-18 08:33:29 +11:00
kd0aij 95da094bfe Plane: update tailsitter speedscaling logic 
add tailsitter gain scaling option mask and logging
tailsitter qassist bugfix; thanks, @iampete
apply roll limit in tailsitter bodyframe roll control
add define for future exclusion of tailsitter gainscaling debug code/logging
tailsitter bodyframe roll and qacro input scaling bugfixes:
  respect Q_TAILSIT_RLL_MX and roll/yaw scale parameters in bodyframe roll modes
  fix unintended swap of Q_ACRO_RLL/YAW_RATE params in QACRO mode
don't scale motor tilt

Co-authored-by: IamPete1 <33176108+IamPete1@users.noreply.github.com>
 2019-12-18 08:33:29 +11:00
Peter Barker 1fdb4b429f Plane: use https:// scheme for ardupilot URLs 2019-12-10 07:53:46 +11:00
Andrew Tridgell 36baaeb3a0 Plane: added option to run idle governor in MANUAL mode 
useful for quadplane testing
 2019-11-17 20:10:54 +11:00
Andrew Tridgell e5bad28f1d Plane: added Q_ASSIST_ALT parameter 
this allows for quadplane assistance in fixed wing modes when the
aircraft drops below a given altitude. This could help save an
aircraft that is flying badly in fixed wing mode
 2019-11-09 20:17:36 +11:00
Andrew Tridgell 680a89671f Plane: fixed doc path for Q_AUTOTUNE 2019-11-01 09:31:40 +11:00
Leonard Hall 87b49c64f8 Plane: limit ATC_MOT_MIX_MAX in case of a fly away 2019-10-31 12:23:48 +08:00
Michael du Breuil ee96ec7f0d Plane: Support new AP_Vehicle::set_mode 2019-10-25 08:48:22 +08:00
Randy Mackay edb5f05339 Plane: minor comment changes 2019-10-22 07:15:48 +08:00
Mark Whitehorn 1a2abae902 Plane: reduce QTUN log rate to 25Hz 2019-10-20 06:24:46 +11:00
sas 9405fd6958 Plane: remove unused location argument to control_auto 2019-10-08 10:49:51 +11:00
Michael du Breuil f9580424f6 Plane: Resore old default behaviour for throttle curves 
The change in this made QStabilize behave very differently then it had,
which is quite shocking in a test flight.
 2019-10-07 21:17:07 +11:00
Andrew Tridgell db4ae9ff24 Plane: check airspeed and active Z controll for hover learning 2019-10-04 14:01:08 +10:00
Andrew Tridgell 5c43b18672 Plane: fixed height_above_ground() for case when rangefinder is below min 
this prevents a rangefinder that goes below min distance from causing
the calculations that depend on height above ground to fail
 2019-09-17 09:36:26 +10:00
Andrew Tridgell 34b0967d09 Plane: prevent fwd motor from spinning up on ground in quadplane landing 
if the rangefinder starts to measure below it's min range then the fwd
motor can spin up.

Thanks to Josh for reporting this!
 2019-09-17 09:36:26 +10:00
Andrew Tridgell 7751352a86 Plane: implement VTOL landing for AFS termination 
this allows for vertical landing as an AFS_TERM_ACTION
 2019-09-12 09:59:17 +10:00
Mark Whitehorn 788e7a840c Plane: default angle_boost to disabled for tailsitters 2019-09-12 09:05:42 +10:00
Michael du Breuil 4f22dff14d Plane: Add an airspeed limit for quadplane takeoffs 2019-09-09 22:06:25 -06:00
Michael du Breuil 77afcf6a1b Plane: Abort takeoffs that take to long to complete 2019-09-09 22:06:25 -06:00
Henry Wurzburg 7178655cbe Plane: fixed landing after VTOL loiters 2019-09-10 08:57:13 +10:00
Leonard Hall 34da437266 Plane: support for upgrade to PID object 2019-07-25 17:38:15 +09:00
Leonard Hall 157f786adf Global: rename desired to target in PID info 2019-07-25 17:38:15 +09:00
Michael du Breuil 22598b1a4b Plane: Reduce inerital nav dependence 2019-07-16 12:11:42 +09:00
Hwurzburg 44f6f7335e Plane: Added Quadplane option for QRTL failsafe action 2019-07-05 11:25:56 +10:00
IamPete1 76663d66e8 Plane: support bicopter tiltrotors 2019-07-02 10:15:17 +10:00
1iggy2 220176f283 Plane: added octa I frame 2019-06-04 09:49:44 +09:00
Peter Barker 400aa53654 Plane: move arming-related functionality into parent classes 
Logging moves up
arming via mavlink moves up
arming via switch moves up
 2019-05-30 07:37:30 +09:00
Mark Whitehorn 34a1cf9528 Plane: move callback setup to QuadPlane::setup() 2019-05-08 10:28:42 +10:00
Mark Whitehorn aeaff72e14 Plane: fix acro stabilization check 2019-05-08 08:44:52 +10:00
Mark Whitehorn 4a7ce1b384 Plane: clean up qacro 2019-05-08 08:44:52 +10:00
Mark Whitehorn dd50d435ab Plane: limit bodyframe roll mode to tailsitters 2019-04-30 08:51:24 +10:00
Mark Whitehorn f054301ec2 Plane: add QACRO roll/pitch/yaw rate params 2019-04-23 09:46:38 +10:00
Mark Whitehorn 8bcf2439ad Plane: quadplane stabilize manual throttle midpoint and expo 
move throttle curve logic to AP_Math

use parameter THROTTLE_EXPO in get_pilot_throttle
 2019-04-23 09:46:38 +10:00
Mark Whitehorn b515431008 AP_Math: add expo and throttle_curve functions 2019-04-23 09:46:38 +10:00
Pierre Kancir 65b4ba0539 ArduPlane: use past_interval_finish_line and line_path_proportion from Location 2019-04-23 09:20:43 +10:00
Peter Barker f09822a400 Plane: adjust for desired spool state and spool state renames 2019-04-14 12:18:03 +09:00
Pierre Kancir d8990a002e Plane: update locations_are_same to same_latlon_as 2019-04-08 08:05:05 -07:00
Pierre Kancir 47141562c0 ArduPlane: use get_distance_NE instead of location_diff 2019-04-08 08:00:52 -07:00
Leonard Hall 2daa5ffb9e Plane: replace set_throttle_out_unstabilized 2019-04-08 09:42:21 +09:00
Tom Pittenger ade6281923 Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter 2019-04-03 17:46:50 -07:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Mark Whitehorn e0765747e7 Plane: add new tailsitter bodyframe roll option 2019-03-26 14:50:37 +11:00
Mark Whitehorn 825055d736 Plane: add rate-only option for QACRO mode 2019-03-19 10:13:59 +11:00
Mark Whitehorn 6414f0e48e Plane: skip plane assignments in QACRO 2019-03-19 10:13:59 +11:00
Andrew Tridgell 2b6210d594 Plane: use WP height for height above ground in vtol landing 
this allows for landings above or below the takeoff height without
requiring the use of terrain data. It allows both the use of vfwd
motor for holding against wind, and the correct height for land final
descent rate
 2019-03-18 14:47:27 +11:00
Andrew Tridgell b4103d04cc Plane: never use vfwd motor if vtol motors shutdown 2019-03-18 13:38:41 +11:00
Andrew Tridgell 7908ad437e Plane: allow fwd motor to run in VTOL land hor positioning 
this fixes an issue with vtol landings below the takeoff point
 2019-03-18 13:38:41 +11:00
Peter Barker ca7566fff9 Plane: use enum class for ArmingMethod and ArmingRequired 2019-03-12 19:48:14 +11:00
Peter Barker cbb0bfb809 Plane: is_flying_vtol: if spool mode is shut down we are not flying 
The subsequent check for get_throttle passes if you switch from QHOVER
to MANUAL on the ground while armed.  get_throttle returns > 0.01 - but
the motors are shut down so no output occurs.
 2019-03-12 10:21:11 +11:00
Mark Whitehorn 4a6b97828f ArduPlane: add tailsitter input type TAILSITTER_INPUT_BF_ROLL 2019-03-06 15:48:51 +11:00
Mark Whitehorn 01d6f1d932 ArduPlane: add body-frame yaw mode for tailsitters 2019-03-06 15:48:51 +11:00
Mark Whitehorn 6e4a2b97f9 ArduPlane:add subclass for copter tailsitters 
cleanup and add tailsit_motmx
add constexpr and motor mask check
add support for tricopter tailsitter
don't call output_motor_mask unless armed
fix whitespace
 2019-03-06 07:53:46 +09:00
Mark Whitehorn 487ad7a90f Plane: add QACRO mode for quadplanes 
use acro_r/p/y_rate params in qacro
port ACRO throttle handling from copter

handle non-tailsitter controls
 2019-03-05 10:13:20 +11:00
IamPete1 f24c6785f2 Plane: add E-stop 2019-02-27 08:51:24 +09:00
Andrew Tridgell 136e10a781 Plane: handle VTOL landing with incorrect height 
if landing above expected height then run landing detector to allow a
switch from LAND_DESCEND to LAND_FINAL

this prevents the plane sitting on the ground until the battery runs
out
 2019-02-26 11:12:58 +11:00
Michael du Breuil b290148ed0 Plane: Don't overwrite the quadplane loiter relax 2019-02-23 11:08:21 +11:00
Michael du Breuil c15983c690 Plane: prevent loss of control when Q_ENABLE is set while flying 
Also rename check_throttle_suppression
 2019-02-21 21:38:03 -07:00
Michael du Breuil 25a2c77782 Plane: Fix not logging quadplane control, and over logging attitude control 2019-02-22 11:59:26 +11:00
Mark Whitehorn 95b3a5bacd ArduPlane: implement hover throttle learning for quadplanes 
disable by default
check quadplane.enable in update_hover_learn
 2019-02-16 19:04:13 -08:00
Mark Whitehorn b9f3118374 Plane: allow changing Q_TRIM_PITCH in flight 
change float comparison to is_equal
 2019-02-12 09:42:19 +11:00
Michael du Breuil df1632054e Plane: Update throttle mix 2019-02-05 11:05:54 +11:00
Andrew Tridgell 28cf9d2f24 Plane: allow rudder at zero throttle 
if rudder disarming is disabled
 2019-02-03 05:02:07 -08:00
Randy Mackay 4d5e13f1d4 Plane: : integrate AC_WPNav::get_speed rename to get_default_speed 2019-01-31 19:34:32 +09:00
Mark Whitehorn 5c81a78c9c Plane: tailsitter forward transition bugfix 2019-01-22 12:55:47 +11:00
Peter Barker 40856fef56 Plane: remove vestiges of old PX4_MIXER code 2019-01-19 19:31:03 +11:00
Peter Barker 6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Randy Mackay 2650b1fe93 Plane: desired-ground-idle replaces spin-when-armed 2019-01-15 11:41:44 +09:00
Andrew Tridgell f35cebcca4 Plane: fixed EKF yaw reset 
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective

thanks to Leonard for noticing the bug!
 2019-01-14 08:32:17 +11:00
Andrew Tridgell 53a1d98b68 Plane: fixed VTOL takeoff to ignore lat/lon in mission 
we should always takeoff vertically
 2019-01-11 13:48:45 +11:00
Michael du Breuil d6cac4b52a Plane: Add a failure timer for quadplane forward transitions 
Falls over to QLAND if we fail to transition
 2019-01-08 10:52:12 +11:00
IamPete1 9c2db806f3 Plane: add units to Q_VFWD_ALT 2018-12-28 16:15:41 +11:00
Andrew Tridgell 9117dcc54b Plane: don't log QTUN when VTOL not active 2018-12-21 22:17:52 +11:00
Andrew Tridgell d3afc9424a Plane: make QTUN logging match copter logging 2018-12-21 22:17:52 +11:00
Andrew Tridgell 1013eddfce Plane: use AHRS_View for RATE logging 2018-12-21 22:17:52 +11:00
Randy Mackay a96c1566ec Plane: fix quadplane pos control param docs 2018-12-18 12:01:07 +00:00
Michael du Breuil 1a45755ffd Plane: Support a different landing radius for quadplane fw approach 2018-12-18 10:11:22 +11:00
Nikhil Upadhye d1e93bae83 Plane: adding new mode QAUTOTUNE 
copter like autotune support for quadplanes and tailsitter in VTOL mode.

cleanup
 2018-12-14 16:33:11 +11:00
Randy Mackay 71708ee4ea Plane: quadplane uses set_defaults_from_table 2018-12-06 12:23:41 +09:00
IamPete1 c6e70c0454 Plane: add roll limit for tailsitters 
Quadplane: add tailsitter pitch params
 2018-12-01 09:40:07 +11:00
Andrew Tridgell b6519c88a5 Plane: fixed a bug in Q_ASSIST_ modes for tiltrotors 
when a tilt-rotor drops below Q_ASSIST_SPEED we need to keep it in the
airspeed wait state until it has regained airspeed, otherwise we will
end up with too low throttle
 2018-11-30 18:17:42 +11:00
Leonard Hall 0943ace7a9 Plane: Zero Yaw correction during transition 
and relax attitude controller when not using lift motors.
 2018-11-30 18:16:29 +11:00
Andrew Tridgell c081ce9adb Plane: don't relax attitude controllers for tailsitters 
this fixes an issue with testing control movement when disarmed
 2018-11-30 13:01:53 +11:00
Andrew Tridgell da69bf3391 Plane: added an abstraction for reverse thrust 
use have_reverse_thrust() and get_throttle_input()
 2018-11-16 08:33:35 +11:00
Andrew Tridgell c59b2c156a Plane: fixes for Q_TRIM_PITCH 
improved documentation and variable names
 2018-11-12 17:05:04 +11:00
IamPete1 5a7bd61e8c Quadplane: add trim params 2018-11-12 17:05:04 +11:00
Michael du Breuil 8e906e0ba0 Plane: Add support for a loiter to alt approach to VTOL landing 2018-11-10 18:58:54 +11:00
Peter Barker 4e3e39a3e8 Plane: make libraries get EKF control limits themselves 2018-10-09 10:47:38 +11:00
Michael du Breuil 02d37d43d2 Plane: Disallow climbs during TRANSITION_AIRSPEED_WAIT 2018-10-02 09:35:47 +10:00
Michael du Breuil b2ef6b901e Plane: Cope with AC_PosControl renaming 2018-09-20 15:15:45 -07:00
Michael du Breuil b6efc8a20b Plane: reduce some copy pasted code 2018-09-20 13:47:21 -07:00
Leonard Hall 13c27e0eb8 Plane: Missing Loiter Init on accel 2018-09-19 17:29:55 +09:00
Andrew Tridgell 5136b90d27 Plane: do attitude relax after 100ms 2018-09-15 11:00:29 +10:00
Leonard Hall 7372a7b5f9 QuadPlane: Remove repeat I term reset 2018-09-15 11:00:29 +10:00
Andrew Tridgell ef154cf3fa Plane: fixed relaxing of attitude controller on transition 
this fixes an issue found by Leonard where the attitude controller
could have residual control left over from a previous transition when
engaging the VTOL attitude controller
 2018-09-15 11:00:29 +10:00
Michael du Breuil f9e56f9d12 Plane: Respect frame type on VTOL_TAKEOFF commands 
allow missioncommands to fail to start
 2018-09-11 06:42:00 +10:00
Michael du Breuil 925d76bb8c Plane: Small cleanup to quadplane const (and clarity) 2018-09-04 15:11:41 +10:00
Leonard Hall e11c7c6069 QuadPlane: remove true from init of loiter 2018-09-04 13:37:28 +09:00
Michael du Breuil 3d923d0572 Plane: Send a quadplane version of NAV_CONTROLLER_OUTPUT 2018-08-07 09:49:01 +10:00
Andrew Tridgell 16c7ab81dc Plane: pass rc_speed to motor backend constructors 
this sets the right speed as early as possible
 2018-07-28 15:25:57 +10:00
IamPete1 20c67019b0 Plane: added Q_TAILSIT_THSCMX 
this provides more flexibility in tailsitter throttle scaling
 2018-07-19 09:48:25 +10:00
Andrew Tridgell d8a7618e15 Plane: update use of AC_Loiter controller for quadplane 
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.

The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.

This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
 2018-06-11 08:40:58 +09:00
Andrew Tridgell d07f8aa42b Plane: fixed a bug in transition to QSTABILIZE for tailsitters 
this bug was found bug Marco on his tailsitter. It resulted in zero
throttle for 2s in transition from FBWA to QSTABILIZE
 2018-04-25 18:01:12 +10:00
Randy Mackay 840a6e4147 Plane: quadplane uses AC_Loiter 
includes param conversion
 2018-04-04 10:45:10 +09:00
Peter Barker f6a185a3c3 Plane: factor vehicle's mavlink send_heartbeat 2018-04-03 13:05:19 +01:00
Randy Mackay 548a7f8fcf Plane: add minor comment to quadplane 2018-03-16 13:50:57 +09:00
Leonard Hall ee745d2cd2 Plane: quad plane uses rate-control control during transitions 2018-03-16 13:50:57 +09:00
Leonard Hall a16d4ddad7 Plane: quadplane uses poscontrol instead of loiter 2018-03-16 13:50:57 +09:00
Randy Mackay c5d838125b Plane: quadplane logs PSC message 2018-03-16 13:50:57 +09:00
Randy Mackay 09cad7c59d Plane: quadplane integrates attitude control inertial_frame_reset 2018-03-16 13:50:57 +09:00
Randy Mackay 03c162432e Plane: quadplane provides dt to AC_WPNav::set_pilot_desired_acceleration 2018-03-16 13:50:57 +09:00
Randy Mackay a0a9a68fbc Plane: quadplane smoothing gain replaced by Q_A_INPUT_TC 
Q_A_INPUT_TC parameter allows this to be tuned and a single value (which defaults to a value between the two previously used values) is used for all modes
 2018-03-16 13:50:57 +09:00
Leonard Hall aa47b19dea Plane: remove quadplane calls to multicopter poscontrol's freeze_ff_xy 2018-03-16 13:50:57 +09:00
Randy Mackay ddcd08d6b6 Plane: PSC_ACCZ param name shortened 2018-01-31 08:48:21 +09:00
Michael du Breuil aec7521da4 Plane: Fix truncation of a time interval 
Truncating the a millisecond time delta to uint16_t causes it to wrap
every 65 seconds, which could momentarily reset the desired climb rate
 2018-01-25 14:30:49 +11:00
Randy Mackay d579e086cf Plane: quadplane param index comment for moved PIDs 2018-01-24 21:14:53 +09:00
Andrew Tridgell 20b05e4228 Plane: added conversion code for PID layout change 
this copes with the move of multicopter PIDs inside the position
controller
 2018-01-24 18:23:59 +11:00
Randy Mackay 7b1157e2d8 Plane: remove setting accel_z PID controller's dt 
This is handled within pos-controller's set_dt function
 2018-01-23 12:00:43 +09:00
Randy Mackay f41f4dc6e5 Plane: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay 017e71a748 Plane: quadplane velocity pi moves to position control library 2018-01-23 12:00:43 +09:00