Randy Mackay
7a5e130268
Copter: 4.4.2-beta1 release notes
2023-10-13 16:32:07 +09:00
Mykhailo Kuznietsov
3a231f8b32
ArduCopter: Fix some typos
...
Fixed some typos found in the code.
2023-10-12 18:30:42 +11:00
Peter Barker
521d21765e
ArduCopter: allow for compilation without AP_RTC_ENABLED
2023-10-11 19:17:27 +11:00
Rhys Mainwaring
b585d61809
Copter: remove duplicate friend declaration
...
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
2023-10-09 09:05:19 +09:00
muramura
5ce731fa00
Copter: Two processes in one
2023-10-04 19:23:29 +11:00
Peter Barker
cd92e301ab
ArduCopter: don't send fence_status mavlink message if fence not compiled in
2023-10-04 19:13:23 +11:00
Peter Barker
ef1952e1c0
Copter: acccept DO_LAND_START as both int and long
2023-09-29 13:55:32 +10:00
Peter Barker
d54d9ae922
ArduCopter: accept several mode-changing commands via command_int
...
... as well as via command_long
2023-09-29 08:56:50 +10:00
Peter Barker
a0ca3ffb22
ArduCopter: handle MAV_CMD_DO_FLIGHTTERMINATION as both long and int
2023-09-27 11:27:45 -07:00
muramura
d36667c84a
Copter: Change to ternary operator
2023-09-27 08:12:01 +10:00
Randy Mackay
28e5ea152e
Copter: 4.4.1 release notes
2023-09-26 12:37:42 +09:00
Peter Barker
efc2c39c96
ArduCopter: remove COMPASS_CAL messages from streamrates if tumble cal disabled
...
fatal error in SITL if we try to send messages with these disabled
2023-09-26 11:39:50 +10:00
Peter Barker
ad9a36c157
Copter: allow MAV_CMD_CONDITION_YAW to be run as COMMAND_INT
2023-09-26 11:35:55 +10:00
Peter Barker
c61022f596
Copter: handle DO_CHANGE_SPEED as both COMMAND_LONG and COMMAND_INT
2023-09-20 15:44:38 +10:00
Peter Barker
b3dd5c20c5
Copter: handle MISSION_START as both COMMAND_LONG and COMMAND_INT
2023-09-20 09:39:31 +10:00
Peter Barker
624cfc8fcc
ArduCopter: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG
2023-09-19 11:16:10 +10:00
Peter Barker
4c6918afea
ArduCopter: handle DO_PARACHUTE as both command_long and command_int
2023-09-19 11:14:29 +10:00
Randy Mackay
b407591663
Copter: 4.4.1-beta2 release notes
2023-09-14 16:24:18 +09:00
Peter Barker
5e9c2a04d0
Copter: allow motor tests to be triggered with COMMAND_INT
2023-09-13 18:14:31 +10:00
Peter Barker
619b1ecd47
ArduCopter: support preflight calibration via command_int
2023-09-13 17:24:07 +10:00
rishabsingh3003
8a1fa0e096
Copter: Allow fast descend while Prec Landing
2023-09-13 11:49:16 +10:00
Peter Barker
38ba5da09b
Copter: allow winch commands to be run as both COMMAND_LONG and COMMAND_INT
2023-09-12 09:30:27 +10:00
Peter Barker
0b225a825c
ArduCopter: use AHRS to get Locations from origin-offset
2023-09-12 09:29:26 +10:00
Ep Pravitra
9700e65d19
AP_AdvancedFailsafe: option to automatically set mode to auto when datalink is loss
...
When enabled, it ensures vehicle enters AUTO even if it is currently in other autonomous modes (for example Guided)
2023-09-12 09:09:39 +10:00
Peter Barker
26b7092c1a
ArduCopter: correct logging when rally disabled
2023-09-05 22:23:51 +10:00
Randy Mackay
4ce65bb3f7
Copter: 4.4.1-beta1 release notes
2023-09-05 19:51:35 +09:00
Peter Barker
496e6b18ff
Copter: accept solo buttons as both long and int
2023-09-05 09:58:53 +10:00
Peter Barker
b725a632d6
ArduCopter: allow MAV_CMD_SOLO_BTN_PAUSE_CLICK as COMMAND_INT
2023-08-29 11:14:05 +10:00
Peter Barker
e922d7e3bd
ArduCopter: accept mount commands as command_int
2023-08-24 22:07:12 +10:00
Randy Mackay
c2be0a5767
Copter: 4.3.8 release notes
2023-08-24 20:28:28 +09:00
Andrew Tridgell
b3954afe52
Copter: add friend for AP_ExternalControl_Copter
2023-08-24 07:46:06 +10:00
muramura
79a59d2739
Copter: The preprocessor determines whether rangefinder initialization is possible
2023-08-23 22:31:15 +10:00
muramura
6820e96ca8
Copter: Change from fast_loop method to FAST_TASK(NFC)
2023-08-23 19:24:01 +09:00
Andrew Tridgell
c452325de2
Copter: added AP_ExternalControl support
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
Co-authored-by: Andrew Tridgell <tridge60@gmail.com>
2023-08-22 18:21:23 +10:00
Peter Barker
57eeda0439
ArduCopter: pass mavlink_message_t to handle_command_*_packet
...
the "special case" blocks are getting longer and longer. Merge the switch statements for the command type to be handled by passing around the message.
2023-08-22 10:11:33 +10:00
Randy Mackay
7d264f1700
Copter: 4.4.0 release notes
2023-08-18 17:37:15 +09:00
Randy Mackay
f3e56cc7a0
Copter: 4.3.8-beta1 release notes
2023-08-16 10:03:23 +09:00
Randy Mackay
01387335a9
Copter: 4.3.7 release notes fix
2023-08-16 10:03:16 +09:00
Shiv Tyagi
1c38be93c5
Copter: use AP_FOLLOW_ENABLED
2023-08-15 09:57:35 +10:00
Andy Piper
49bdf7a295
Copter: rename dshot define
2023-08-15 06:53:48 +10:00
bugobliterator
73aed28be7
ArduCopter: use HAL_ENABLE_DSHOT instead of DISABLE_DSHOT
2023-08-15 06:53:48 +10:00
bugobliterator
6d4b5cfc1b
Copter: use DISABLE_DSHOT value instead of if defined
2023-08-15 06:53:48 +10:00
Randy Mackay
495c8c25ac
Copter: 4.4.0-beta4 release notes
2023-08-14 08:51:35 +09:00
muramura
8f13826383
Copter: Remove code that will never be executed
2023-08-11 12:46:06 -07:00
arshPratap
5f17e33b39
AP_Arming: Added DDS Method for Arming/Disarming
2023-08-11 13:35:49 +10:00
Peter Barker
3fd0886574
Copter: rely on magic COMMAND_INT transform for MAV_CMD_DO_PAUSE_CONTINUE
2023-08-09 07:44:44 +10:00
Peter Barker
201e276f00
ArduCopter: avoid use of MINIMIZE_FEATURES define in Copter directory
2023-08-08 10:35:19 +10:00
Randy Mackay
8499a6bd78
Copter: 4.4.0-beta4 release notes
2023-08-01 20:01:32 +09:00
Peter Barker
d41e677c08
Copter: correct return error return codes for DO_FOLLOW
...
in the case it wasn't compiled in the return code would be correct.
in the case that the parameter was invalid we would return UNSUPPORTED , which is wrong, it should be DENIED
2023-08-01 10:43:34 +10:00
Peter Barker
a79a8ca659
ArduCopter: rely on conversion from long to int for DO_FOLLOW
...
we have code which tries to handle commands coming in as command long as command int.
Change to rely on that code working, rather than handling both command-long and command-int variants
2023-08-01 10:43:34 +10:00
Iampete1
d927af03e9
Copter: remove heli motors param checks, moved to motors arming check
2023-08-01 09:12:51 +09:00
Iampete1
40414499fd
Copter: AP_Arming: print multiple failures at once.
2023-08-01 09:12:51 +09:00
muramura
d9492c1c6c
Copter: Change RATE (NFC)
2023-07-31 17:18:21 +09:00
Randy Mackay
9d2e9b37c8
Copter: log MNT at 10hz
2023-07-26 17:33:18 +10:00
Iampete1
0de7544650
Copter: SURFTRAK_MODE: mark as reboot required
2023-07-26 11:31:05 +09:00
Andy Piper
baae1b7732
Copter: squash bitwise & warnings
2023-07-13 11:02:40 +10:00
Andrew Tridgell
105b7a6163
ArduCopter: removed set_blocking_writes_all calls
2023-07-12 17:06:02 +10:00
Randy Mackay
e84cd0cad8
Copter: update 4.4.0-beta3 release notes
2023-07-04 15:15:36 +09:00
Tom Pittenger
a88c3a08b0
Copter: is_landing/is_taking_off not to req scripting
2023-07-03 22:44:00 -07:00
Randy Mackay
4af22db6c2
Copter: update 4.4.0-beta3 release notes
2023-07-04 12:44:45 +09:00
Randy Mackay
a11033a67d
Copter: 4.4.0-beta3 release notes
2023-07-04 12:44:37 +09:00
Henry Wurzburg
d0a0fd730c
ArduCopter: allow scaled passthru to go to trim on rc failsafe
2023-06-29 21:37:12 +10:00
Iampete1
678017c577
Copter: implement FLTMODE_GCSBLOCK bitmask
2023-06-28 12:56:25 +01:00
Iampete1
717f82f104
Copter: check with motors if motor test is allowed
2023-06-27 10:24:15 +10:00
Andrew Tridgell
ab07a2ecf3
Copter: moved MAV_CMD_AIRFRAME_CONFIGURATION to common code
2023-06-21 17:38:28 +10:00
muramura
b153a90430
Copter: Note that this process is for SOLO
2023-06-20 11:10:26 +10:00
Peter Barker
cd8a699675
ArduCopter: add option to disable relay and servorelay libraries
2023-06-20 09:36:39 +10:00
bugobliterator
1242054cbb
ArduCopter: move sysid_my_gcs to be public
2023-06-17 14:49:22 +10:00
Tatsuya Yamaguchi
30318b51f9
Copter: remove has_user_takeoff from ModeAuto class
2023-06-17 14:41:39 +10:00
Tatsuya Yamaguchi
10c3a70072
Copter: add has_user_takeoff in ZigZag mode
2023-06-14 13:28:41 +10:00
Randy Mackay
f7149ed138
Copter: update 4.4.0-beta2 release notes
2023-06-08 10:07:12 +09:00
Randy Mackay
775281397b
Copter: 4.4.0-beta2 release notes
2023-06-08 10:07:07 +09:00
Randy Mackay
388e54458c
Copter: 4.3.7 release notes
2023-06-03 11:31:39 +09:00
Asif Khan
edf9fbdb60
ArduCopter: support for Mount following the lead vehicle in follow mode
2023-05-26 11:10:35 -07:00
Tatsuya Yamaguchi
fdac668782
Copter: implement is_landing and is_taking_off for use by lua
2023-05-26 10:59:09 -07:00
Randy Mackay
2c675246c9
Copter: 4.3.7-beta1 release notes
...
# Conflicts:
# ArduCopter/ReleaseNotes.txt
2023-05-25 11:24:21 +09:00
Peter Barker
078debb893
ArduCopter: use enum class for mount type
2023-05-25 09:54:43 +10:00
Peter Barker
aa5a882de8
Copter: protect against bad vels/accels being sent through in guided mode
2023-05-25 09:42:28 +10:00
Tatsuya Yamaguchi
6b40fd11d6
Copter: Add GCS Failsafe Brake option
2023-05-20 17:28:54 +10:00
Peter Barker
6c5c88061f
ArduCopter: move call of notify.update up to AP_Vehicle
2023-05-17 18:41:15 +10:00
Randy Mackay
dec9584e5e
Copter: handle_command_mount override accepts msg
...
mavlink msg required to extra caller's sysid/compid
2023-05-17 12:38:49 +10:00
Asif Khan
27d96eb64e
AP_Mount: Support for pointing mount to circle center
2023-05-08 10:48:20 +10:00
Michael du Breuil
04b16d1a79
Copter: Support checking max rpm in the takeoff check
2023-05-02 10:23:55 +10:00
Randy Mackay
2ded167bc7
Copter: version to 4.5.0-dev
2023-04-26 17:45:52 +10:00
Randy Mackay
00e1f1d6f5
Copter: 4.4.0-beta1 release notes update
2023-04-21 08:56:09 +09:00
Randy Mackay
16e9d183f1
Copter: update 4.4.0-beta1 release notes based on peer feedback
2023-04-21 08:56:02 +09:00
Randy Mackay
75874e3290
Copter: 4.4.0-beta1 release notes
2023-04-21 08:55:56 +09:00
Peter Barker
f33e5e7847
ArduCopter: allow Copter to emit MISSION_STATE_PAUSED when paused in auto
2023-04-21 09:49:55 +10:00
Randy Mackay
0d43a2bec4
Copter: RTL accepts do-change-speed commands
2023-04-20 21:39:57 +10:00
Iampete1
be275e2cac
Copter: use new motors thrust linrisation, don't send air density ratio
2023-04-18 09:32:22 +10:00
Peter Barker
96fa96936b
ArduCopter: AP_Arming ensures mission items present when in auto mode
...
Co-authored-by: Henry Wurzburg <hwurzburg@yahoo.com>
2023-04-14 07:49:54 +10:00
Peter Barker
3eae095966
ArduCopter: use AP_BEACON_ENABLED instead of BEACON_ENABLED
2023-04-12 09:24:39 +10:00
Henry Wurzburg
1f94fd69f9
ArduCopter: move estop pre-arm to AP_Arming and add exception
2023-04-11 09:24:06 +10:00
Randy Mackay
ce1e0c3782
Copter: 4.3.6 release notes
2023-04-06 14:16:30 +09:00
Peter Barker
caa77ccba8
Copter: remove very old parameter conversion information
2023-04-04 10:40:56 +10:00
Peter Barker
b24d74b35d
Copter: remove stale conversion functions
...
past this PR upgrade from Copter-3.3 will not be seamless
2023-04-04 10:40:56 +10:00
Randy Mackay
e57a9cacb6
Copter: 4.3.6-beta2 release notes
2023-03-27 11:19:13 +09:00
tzarjakob
97b7e8d1d0
ArduCopter: configuration of Precision Landing for custom build server
2023-03-27 09:04:07 +11:00
murata
8c1e2546d8
Copter: Add an element of NAV_CONTROLLER_OUTPUT to ZIGZAG mode
2023-03-26 20:02:14 +11:00
Randy Mackay
71d02820a7
Copter: 4.3.6-beta release notes
2023-03-26 12:00:16 +09:00
Peter Barker
3f21946d50
Copter: stop setting motor output levels at boot
...
We should not have different state in our motors library based on your RC stick positions at boot.
this call is made anywhere we actually arm the motors anyway.
2023-03-25 22:19:54 +11:00
Peter Barker
9c2d68bcd1
Copter: remove enable_motor_output method
...
this doesn't actually do what it says it does. I think the functionality to set the motors armed was split out long ago but this little method and its misleading comments remained
2023-03-25 07:57:48 +09:00
Leonard Hall
6d5bc17c8e
Copter: Add TKOFF_TH_MAX
2023-03-21 19:51:03 +09:00
Leonard Hall
715bb6e705
Copter: Guided Yaw Fix
2023-03-21 08:23:12 +09:00
bugobliterator
3012450b4a
ArduCopter: change INS_ to INS
2023-03-21 10:04:16 +11:00
Randy Mackay
b638a3576b
Copter: 4.2.4 release notes
2023-03-16 13:36:47 +09:00
Randy Mackay
fda4349f5b
Copter: 4.1.6 release notes
2023-03-16 13:35:43 +09:00
Randy Mackay
63c0b276c3
Copter: 4.3.5 release notes
2023-03-14 19:15:51 +09:00
CharlieBurge
62119d5bbe
Copter: remove check on pause state
2023-03-09 18:13:38 +00:00
CharlieBurge
659ba8324b
Copter: report success if already paused or resumed
2023-03-09 18:13:38 +00:00
Leonard Hall
5a178984c4
Copter: Add Radio Failsafe Brake option
2023-03-09 09:25:43 +11:00
Pierre-Yves BRULIN
d67e67965f
Copter: Reenable PID logging in SystemID mode
2023-03-08 19:28:05 +11:00
Randy Mackay
e6ad42b851
Copter: fix terrain offset reset
2023-03-07 13:41:35 +11:00
Leonard Hall
7978347044
Copter: Add support for terrain altitude time constant
2023-03-07 13:41:35 +11:00
Peter Barker
ade654b251
Copter: use AP_WINCH_ENABLED in place of WINCH_ENABLED
2023-03-03 20:59:06 +11:00
Peter Barker
f47e60d1ea
AP_HAL_ChibiOS: add and use AP_WINCH_ENABLED
2023-03-03 20:59:06 +11:00
Randy Mackay
25582d2ecc
Copter: 4.3.5-rc1 release notes
2023-03-02 15:03:09 +09:00
Randy Mackay
e30a492137
Copter: integrate camera frontend/backend split
2023-03-01 18:18:51 +11:00
Randy Mackay
aadcc8501e
Copter: 4.3.4 release notes
2023-03-01 12:01:18 +09:00
Stephen Dade
b23f5e380c
Copter: Allow arming in guided mode from scripting
2023-02-21 22:32:32 +11:00
Peter Barker
9e00b8eeac
ArduCopter: add support for mavlink in-progress message
2023-02-21 17:07:41 +11:00
rishabsingh3003
7a8f8f7907
Copter: Obey loiter_ccw flag for loiter turns
2023-02-15 19:14:43 +11:00
Randy Mackay
79dc650bbd
Copter: update 4.3.4-rc1 release notes again
2023-02-15 12:32:24 +09:00
Randy Mackay
58227ba37b
Copter: update 4.3.4-rc1 release notes
2023-02-15 12:32:21 +09:00
Randy Mackay
ddbbaee828
Copter: 4.3.4-rc1 release notes
2023-02-15 12:32:18 +09:00
murata
a6feb97668
Copter: Match type to set value
2023-02-10 15:38:10 +09:00
Peter Barker
c0b0ae44d5
Copter: don't use uninitialised stack data when determining ekf_over_threshold
2023-02-09 09:28:46 +09:00
murata
7a7f84adee
Copter: Clarify the exclusion determination in the ENUM definition
...
Co-authored-by: Pierre Kancir <pierre.kancir.emn@gmail.com>
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
2023-02-07 08:20:01 +09:00
Bill Geyer
1c9b4a8ac3
Copter: style formatting
2023-02-05 17:54:33 -05:00
Bill Geyer
b24a6fe15f
Copter: fix landing detector for autorotation
2023-02-05 17:54:33 -05:00
Bill Geyer
128794ec84
Copter: run update autorotation before motors
2023-02-05 17:54:33 -05:00
Bill Geyer
562050a800
Copter: make code work for manual autorotations outside SITL
2023-02-05 17:54:33 -05:00
Ferruccio1984
da4a2ec85d
Copter: Implementation of autorotation condition at RSC level
...
enables faster re-spool(user settable timer) after power engagement
2023-02-05 17:54:33 -05:00
Peter Barker
1f13fd35e3
ArduCopter: avoid using struct Location
...
clang reports this could be a problem when compiling under some EABIs. Remove it from most places as it is just noise, replace with class where we want to avoid including Location.h
2023-02-04 22:51:54 +11:00
mihaelsubasic69@gmail.com
cfa3370f9f
Copter: add comment to check throttle is not too high for guide_nogps and auto
2023-02-02 08:29:01 +09:00
rishabsingh3003
1452b50196
Copter: Add option to resume precland after reposiiton
2023-01-31 19:56:43 +09:00
Iampete1
e35b52c0be
ArduCopter: use check_enabked hepler to always check if all bit is set
2023-01-24 11:09:51 +11:00
Iampete1
001eb20fc3
ArduCopter: use check_enabled helper
2023-01-23 11:00:13 +09:00
Randy Mackay
227bb5520d
Copter: 4.3.3 release notes
2023-01-20 10:20:59 +09:00
Akshat Upadhyay
928c3557af
Copter: skip throttle high arm check when arming in AUTO
2023-01-19 08:26:00 +09:00
Andrew Tridgell
8cabcfc750
Copter: allow for flight mode UI when FRAME_CLASS=0
...
this makes the user experience of a first time install nicer for
copters/helis. At the moment the user finds the GCS is not functional,
for example flight mode drop-downs don't display. This can be
confusing as the user doesn't know about the link between displaying
flight modes and the FRAME_CLASS
2023-01-17 09:40:12 +09:00
Peter Barker
bba5b34c1e
Copter: remove FS_OPTIONS parameter conversion
...
This code is in 4.0.7 but not 3.6.11 - i.e. after this someone upgrading from 3.6 to master (and presumably 4.4) won't get this conversion done.
This conversion is flawed in that someone configuring a default for a parameter in a configuration file will have that value over-ridden by this code.
2023-01-12 20:33:43 +11:00
Iampete1
13818eac99
ArduCopter: use shared param info defines
2023-01-11 18:41:34 +11:00
rishabsingh3003
b397772ec6
Copter: update terrain db pre-arm checks
2023-01-10 13:22:44 +11:00
Randy Mackay
18c6bb0d67
Copter: update 4.3.3-rc1 release notes
2023-01-10 10:16:33 +09:00
Randy Mackay
dc7b0d6027
Copter: 4.3.3-rc1 release notes
2023-01-10 10:16:31 +09:00
Leonard Hall
4d557f95ea
Copter: Use filtered and corrected range finder in surface tracking
2023-01-10 08:55:31 +09:00
Peter Barker
18f9702db8
ArduCopter: make check_var_info void
...
Given all the callers die anyway, make it void
2023-01-10 10:48:15 +11:00
Randy Mackay
e076ce64a1
Copter: replace get_rate_bf_targets with get_rate_ef_targets
2023-01-09 10:34:34 +09:00
Peter Barker
287b6e0364
ArduCopter: remove logging of first home location into CMD message set
2023-01-03 11:22:18 +11:00